• Professional Development
  • Medicine & Nursing
  • Arts & Crafts
  • Health & Wellbeing
  • Personal Development

29248 Spa courses in Cardiff delivered Online

IWFM Level 5 Certificate in Facilities Management

By The Business School (UK) Ltd

Facilities management professionals are responsible for services that support business. Their roles can cover management of a wide range of areas including health and safety, risk management, business continuity, procurement, sustainability, space planning, energy, property and asset management. They are typically responsible for activities such as catering, cleaning, building maintenance, environmental services, security and reception. The Level 5 qualifications will provide the skills needed to complete complex tasks and take on responsibility for planning and delivering solutions while developing your specialised knowledge of the profession. It is for you if you are at a middle or senior management level and responsible for more complex functions, or if you are aspiring to these roles and looking to stretch and develop.

IWFM Level 5 Certificate in Facilities Management
Delivered Online On Demand
£1,289

Clinical Coach Standardisation Event July 2025

By Samantha Morgan-Hourd

Clinical coach standardisation events

Clinical Coach Standardisation Event July 2025
Delivered Online
FREE

Advanced Level - Assessing and Monitoring the Condition of Power Transformers by Oil Analysis

By EnergyEdge - Training for a Sustainable Energy Future

About this Virtual Instructor Led Training (VILT) The objective of this 4-half-day Virtual Instructor Led Training (VILT) course is to equip participants with the required knowledge so that they can define and implement an effective oil analysis programme, monitor the condition of transformers and understand oil analysis reports as part of their maintenance strategy. This VILT course is delivered in partnership with ENGIE Laborelec. Training Objectives Participants will be able to go through the following areas during the VILT course: Condition monitoring of power transformers through oil analyses: Transformer Health Index, Transformer Fleet Condition Assessment, Risk Matrix Best practices Which oil analyses/how frequent DGA: focus on partial discharges, sparking, stray gassing, catalytic effects / interpretation systems. Interpretation of results Why and when to perform electrical measurements? International standards: IEEE, IEC, Duval, ASTM, etc Maintenance guidelines Trending and reporting Sampling techniques Use of online monitoring for DGA/water: implementation and real-case advantages etc: New developments: importance of methanol as ageing marker, temperature correction of ageing markers, stray gassing of oils in service etc REX, case studies and real-case exercises concerning power transformers within generation and high-voltage grids Discussion of reports on power transformers Use of unused insulating transformer oils Market trends in the use of inhibited and uninhibited oils Differences, advantages and drawbacks of uninhibited compared with inhibited oils Importance of additives, oxidation stability tests, stray gassing, etc Target Audience The VILT course is intended for a wide audience, including professionals who are maintenance staff, electrical engineers and asset managers responsible for transformers. Typical industries are powerplants, high voltage grids or large industrial sites. Course Level Basic or Foundation Training Methods The VILT course will be delivered online in 4 half-day sessions comprising 4 hours per day, with 2 x 10 minutes break per day, including time for lectures, discussion, quizzes and short classroom exercises. Course Duration: 4 half-day sessions, 4 hours per session (16 hours in total). This VILT course is delivered in partnership with ENGIE Laborelec. Trainer Your expert course leader is a senior expert in the field of insulating and lubricating oils and of condition monitoring of power transformers and turbines. He has 20 years of experience within power industry and since 2010 Key Expert within the ENGIE group. He has worked on various international projects such as the Al Dur power plant in Bahrain, Shuweihat II power plant in UAE, PP11 and Jubail Marafiq power plants in Saudi Arabia and Sohar II and Barka III power plants in Oman. He has also been involved in consulting work in Malaysia for Hyrax Oil. Other assignments include Shell, Nynas, Total, ABB, Alstom, CG Pauwels in Europe. POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information about post training coaching support and fees applicable for this. Accreditions And Affliations

Advanced Level - Assessing and Monitoring the Condition of Power Transformers by Oil Analysis
Delivered in Internationally or OnlineFlexible Dates
£1,719 to £1,999

Nutritional Therapy Diploma

By Plaskett International

The prevalence of ill health is real. Become an expert practitioner in treating individuals using a truly holistic approach. A MESSAGE FROM THE AUTHOR The great need for practitioners is emphasised today, not only by the prevalence of well-established diseases, but also by the appearance of quite new conditions which are not necessarily regarded as being nutritional illnesses. In fact many students come to Nutritional Therapy after experiencing and their own health problems and seek to help others with similar difficulties. We know that nutrition lies at the very heart of these problems and it is our absolute intention to share that knowledge with you. Every person's nutritional needs differ and our courses teach students to recognise this at the outset - there is no haphazard approach. We are absolutely certain that you will find this a fascinating course as you train to become a practitioner of the highest degree. DR. LAWRENCE PLASKETT Course Duration 3 years Study Hours 3,000 hours Course Content 14 folders Course Fee £1,995 Course Overview The Plaskett Professional Diploma in Nutritional Therapy is the most scientific and advanced practitioner level course that we offer. Nutritional Therapy is a form of therapy that uses food, supplementary nutrients and cleansing procedures to alleviate or prevent chronic health problems and this course will train you to practise as a Nutritional Therapist of the highest degree. You will: Receive a training which is truly holistic in nature Be presented with the unique teachings of Dr. Lawrence Plaskett whose long experience working in the borderlands between nutrition and medicine enables him to offer a synthesis between many fields that are not often brought together: nutrition, pathology, biochemistry, toxicology, pharmacology, cell biology, naturopathy and homoeopathy Develop the professional skills and specific diagnostic insight to be able to apply nutrition to health effectively, a training for successful practice that should be applicable anywhere in the world Be trained to offer help with a wide range of conditions, the majority of which are not necessarily regarded in conventional medicine as being nutritional illnesses. These encompass an extremely wide range of chronic conditions, including most diseases and a vast array of symptoms - physical, emotional, mental - which can frequently be experienced outside the range of conventional medical diagnostic 'labels'. Develop the necessary expertise in nutrition which is often lacking in other fields of complementary or alternative medicine. Any programme of nutritional supplements and diet needs to be matched exactly to individual needs by a well-trained practitioner BREAKDOWN OF THE COURSE SECTIONS The Nutritional Therapy Diploma includes the following 14 folders: FOLDER 1 THE HOLISTIC MODEL OF HEALTH CARE This Folder starts with a suggested programme of study and some simple hints on how to make best use of your study time. It then teaches an understanding of basic principles that underpin your entire grasp of nutrition as a biological process. The naturopathic emphasis is upon freeing the body tissues of toxins and the damaged cell components that drag them down to the chronic level.  The Folder looks closely at the nature of toxins and their sources. It looks at their behaviour and effects when they enter the body, the character and mechanisms of the damage they do and, above all, the mechanisms by which they can be removed and the damage repaired.  These are no flights of fancy, as orthodoxy would often have us believe. Rather they are strongly supported by medical science, as the course material will demonstrate. In order to develop a grasp of these processes they have to be visualized as they really happen, on the cellular level.  A Side Book is included covering the structure and life of the cell. Areas Covered Study skills Looking after the body The Life Force Stopping the rot and starting to recover Movements of toxins within and around the body Our relationship to medical orthodoxy The nature of natural and unnatural chemical toxins The concept of toxin-free food Organic growing and water purification Free radicals and anti-oxidants Routes of toxin entry and elimination Damage caused by toxins lying in the tissues Detoxification The relationship between toxic burden and toxic damage The energy reserve role of fat The lipoproteins of the blood FOLDER 2 MINERALS AT WORK IN NUTRITION - PART 1 The minerals come forward as the strongest contenders for pride of place among the nutrient classes because they are so critically vulnerable to deficiency and imbalance in today’s western world.  “Get the minerals right before anything else” is a penetrating summary of their necessary priority. You will learn how the bulk minerals (those we need in greatest amount) depend upon each other and how the micro minerals cannot fulfil their function correctly without a correct balance of the bulk ones.  This Folder takes “first things first” by laying the soundest possible foundation for the study and management of the bulk metals – sodium, potassium, calcium, with magnesium to follow in Folder 5.  We believe that few course providers deal as thoroughly with this absolute cornerstone of nutrition as we do. The effects of these mineral balances permeate the entire subject of nutrition. You will look at many aspects of the subject that affect health. Areas Covered Composition of the human body Overview of macro minerals Sources of nutritional minerals Biological concentration of minerals Micro minerals as catalysts Toxic minerals Digestion, absorption and storage Mineral/mineral antagonisms Sodium and potassium balance Symptoms of sodium and potassium excess or deficiency The sodium pump Sodium and potassium in foods Potassium administration in therapy Calcium in the human skeleton and teeth Calcium in body fluids Hormonal control of calcium Osteoporosis and disputes over calcium requirements Calcium in foods Calcium “mishandling” Calcium in supplement Side Book: The Chemistry of Nutrition Whilst it is possible to teach nutrition to some degree without studying the chemical nature of the nutrients, it is much better that you have at least a superficial understanding. Folder Two therefore includes a side book on Chemistry for those who are new to the subject. However, no one expects you to become highly informed on chemical structures. Access to the facts and to an explanation is what is important. This side-book will free you, as a future practitioner, from the need to manipulate the nutrients without understanding them as many others try to do. Elements, compounds and molecules Valency Ions, acids and salts Combining proportions and moles Carbon compounds and functional groups Oxidation and reduction Calculating the vitamin or mineral content of supplements FOLDER 3 THE BULK NUTRIENTS – PROTEIN, CARBOHYDRATE, LIPIDS AND ENERGY These nutrients provide both the fuel and the building materials for the body. Orthodox nutrition teaches these topics very thoroughly. As to the structures of the compounds, we teach the same things they do.  However, all three main classes of bulk nutrients have their distinctive “wrinkles” when examined from an alternative viewpoint.  With the proteins this has to do with avoiding excesses and, to some degree eschewing animal sources for naturopathic and other reasons.  With the carbohydrates it involves recognizing at a sensitive level the long-term harm that can be done by free sugars and the crucial importance of blood sugar maintenance and control. Orthodox treatments may claim to do these things but there is a vast difference of emphasis and effect.  Among the lipids the “wrinkles” have to do with intricate management of the balance among the essential fatty acids and the importance of the phospholipids in the diet.  You will also learn about the propensity of fats to form toxins and the need to moderate fat intake. All of these so-called alternative “wrinkles” have weighty scientific support, which you will have explained for you.  The chemical nature of these bulk nutrients is fully presented for those who wish it, with a “faster track” through for those who do not. Areas covered Different kinds of proteins The amino acids in proteins The structure of proteins Proteins in foods The essential amino acids and protein quality Nitrogen balance and protein metabolism Proteins in therapeutic policy The simple sugars and sugar derivatives Di, tri and polysaccharides Transformations of carbohydrate Sugars and starch in diets Blood sugar control Metabolic energy The make-up of fats Different kinds of fatty acids Essentiality of omega 6 and omega 3 Lipids and coronary thrombosis Cholesterol, Inc. blood cholesterol levels Fats in western diets Toxins from fats by chemical damage Lecithin and other phospholipids Quantifying energy – units of measurement Energy content of foods and fuels Human expenditures of energy Basal metabolic rate FOLDER 4 FOODS AND FOOD CLASSES Properties, Composition and Naturopathic Effects The merits and disadvantages of wheat, milk and meat are carefully analysed and exposed from the standpoint of both scientific and also naturopathic considerations.  There will be much here to ponder, whilst the scientific evidence leaves little to doubt. You will look rather exhaustively at the merits, nature and composition of vegetables and fruits, not only as groups but also as sub-groups and down to the individual plants.  You will find yourself in a position, when it comes to prescribing, to be directive when necessary about which individual fruits and vegetables it will be best to use.  The groups of pulses, nuts, seeds, fish, shellfish and other seafood’s, as well as beverages, will be closely examined for their composition and suitability for prescription in treatment diets.  Acidity and alkalinity in foods is carefully examined. This Folder is “all about food” but it is also food for thought from beginning to end. Areas covered The wheat grain and its milled fractions Types of bread Nutritional problems of wheat and wheat allergy Sprouted wheat and wheat grass Barley, oats and rye The composition of milks Milk as infant feed The variety of dairy products Nutritional and health problems associated with milk Milk allergy and intolerance Hidden milk in foods Vegetable mineral content and vitality Eliminatory effect of vegetables Composition of 49 different vegetables Potential hazards of plant foods Composition and nature of pulses, nuts and seeds The composition of different meats Naturopathic negatives associated with meat The composition of different fish types Fish as an omega 3 source Shell fish and crustacea Nutritional problems of tea and coffee The composition of fruits Strongly eliminative properties in fruits Acid and alkali-forming foods Using the food composition tables FOLDER 5 MINERALS AT WORK IN NUTRITION - PART 2 Each and every member of the micro minerals group will prove a fascinating area of study and will face you at times almost with disbelief that such minute amounts of substance can exert such extraordinarily powerful effects upon the way the body works and therefore upon health.  Each micro mineral displays its own particular pattern of effects arising from either deficiency or excess. This is almost like a personal signature of the mineral. These will be learnt now but employed later in diagnosis to help determine the likely patterns of micro mineral imbalances in your patients. The role of all-important magnesium is examined together with the principles of using magnesium in therapy. This element plays a key macro mineral role and exerts decisive control over naturopathic elimination.  Areas covered Iron, zinc, copper, manganese, selenium, chromium, molybdenum, iodine, silicon, fluorine, vanadium For each of the microminerals where appropriate: Body content; physiology functions; effects of deficiency or excess; toxicity; factors promoting retention or loss; occurrence in foods; different chemical forms; associated diseases; the use of the appropriate supplements Roles of magnesium in the body Magnesium in foods Effects, diseases and symptoms of magnesium deficiency Naturopathic expectations from magnesium therapy FOLDER 6 THE VITAMINS AT WORK IN NUTRITION The vitamins are mostly micro catalysts just as the micro minerals are. Sixteen of them are the subjects of this Folder.  We first explain their known effects in the body and then go on to set out the ways that they may be used, either for direct therapeutic effect, or in support of other components of nutritional therapy.  As in the cases of all the other nutrients, there will be both scientific and naturopathic evidence presented. Good reference material will be provided. Areas covered For each of the vitamins and vitamin-like substances where appropriate: Body content; precursors; physiology functions; effects of deficiency or excess; toxicity; factors promoting retention or loss; occurrence in foods; different chemical forms; associated diseases; the use of the appropriate supplements. Vitamin A; beta-carotene; Vitamins B: thiamine, riboflavin, niacin, pyridoxine, B12, folic acid, choline, inositol; Vitamin C, Vitamins D1 and D2; tocopherols (Vitamin E); Vitamin K. FOLDER 7 BOWEL FLORA AND THE MAINTENANCE OF HEALTH It is possible to manage and manipulate the bowel flora – the bacteria that inhabit the intestines – so as to produce optimal benefits to health.  Antibiotics and certain dietary errors appear to work in the opposite direction and encourage a flora that will generate more toxins. This Folder deals with both scientific and naturopathic facts and technique and explains how to harness the potential that resides here for bringing better health or maintaining health. It is a crucially important area of nutritional management. Every case you will treat will need the possible prescription of bowel flora products to be reviewed. The other part of this Folder is about the maintenance of health. We provide a general round-up of this pre-clinical part of the course with an overview of nutritional requirements and wise practice in the design of those diets that may be intended to be “healthy” but not necessarily therapeutic.  It includes examination of the special needs of vulnerable groups. You can expect, of course, to meet patients of all ages and conditions and, often enough, you will be asked merely to provide guidance upon what type of diet will best maintain their health.  It also reviews the production of toxin-free food and the hazards posed by the industrialization of food. Finally, there is an approach to the use of supplements for health maintenance and a discussion of strategies for on-going cleansing and toxin avoidance so as to assist in maintaining good health. Areas covered The naturopathic view of the benefits of bowel flora Effect of diet on the bowel flora The putrefactive bacteria Balancing lactose fermenters with other types Toxic amines Benefits of the acid producing species Negatives associated with antibiotics Breast feeding and the bowel bacteria Bowel flora products Overview of the British diet Nutrient requirements for the population Higher requirements for the health conscious Special needs of children and the elderly Special needs of vegetarians and vegans The requirements of pregnancy and lactation Organic growing Industrial food processing and food additives Maintenance supplements Maintenance cleansing FOLDER 8 DIAGNOSIS This Folder is divided into two parts. The first gives a detailed understanding of the basis of diagnosis, while the second gives direct instruction in performing diagnoses.  These two parts, taken together, comprise a major step in your induction as a naturopathic nutritionist. The induction into technique and approach is an essential step, but even more than that, the moulding of your thought process is so very important.  You have to move into the particular “observer” position, mentally, from which the diagnosis is best carried out. The first part of the Folder both provides the “nuts and bolts” of nutritional diagnosis but it also provides the mental positioning to enable you to carry it out with confidence and expertise.  The diagnosis requires understanding of the “constitution”, defined both naturopathically and genetically. An optional side book covers both the miasms and the Chinese 5 elements in respect of their bearing upon diagnosis within nutritional therapy. Fundamental to the practical aspect is the technique for taking case histories and then interpreting them along combined naturopathic and scientific lines.  This logically leads onto the next stage – treatment – in a rational sequence. This Folder contains five “demonstration” case histories. FOLDER 9 TREATMENT This is in many ways the crux of the whole course.  However, being released into nutritional treatments – with their full power – without having made the most thorough preparation, would be most unwise.  Absolutely every topic that has been covered before is required in one way or another at this point. It is here that the interpretation of the case history becomes translated into a prescription of diet and supplements that is honed in a sensitive way to the patient as an individual.  We outline a number of “levels” of the diagnosis that feed into the treatment decisions. There is a “whole person” level, a “weak organ” level, a “metabolic imbalances” level, a “nutritional deficiencies” level and, finally, the lowest in the hierarchy, a “named diseases” level. We also introduce here the profound concepts of intensity, direction and level as they apply to the very basis of Nutritional Therapy prescriptions. All these contributions must converge to provide the best overall treatment.  The focus at this point is on defining the dietary guidelines and the careful orchestration of the essential minerals and vitamins that are to be used.  However, this is also the point at which various named treatments are considered, including bowel cleansing procedures, bowel flora treatment and some of the contributions towards Candida treatment.  These options are set out here and then developed more in the later Folders of Part Two. Special approaches such as the liver cleanse are also considered here along with amino acid therapy, antioxidant therapy and the anti-inflammatory prescription.  We also provide guidelines on how detailed analysis of the composition of diets, and the design of special diets based on such analysis, can contribute to treatment. This Folder provides the “core” of all this, with various modulations and variations being available from the subsequent Folders for “fine tuning”. FOLDER 10 STUDY OF CASE HISTORIES There is nothing quite like practice where case histories are concerned. To be able to study them with great facility and insight and then discern the routes by which they lead towards exact treatment – that is to be your aim here. The Folder provides the challenge of “interpreting” a number of case histories, with help and with feedback. This is an approach that can lead you towards confidence and competence in this task, which is at the centre of practitioners’ daily work. Approaches and solutions are presented. This Folder gives 11 abridged case histories and 20 fully detailed case histories for analysis by the student, 31 case histories in all. These are selected to provide a variety of different types of treatment situation including some that are special or unusual. FOLDER 11 ADDED OR SPECIAL NUTRIENTS AND HERBS In covering the prescribing of supplement programmes in Folder 9, you will have been focused primarily upon those that rank in orthodox nutrition as “essential nutrients”, particularly minerals and vitamins.  However, Nutritional Therapy is enormously enriched by a wide range of other biochemicals that cannot be classified as “essential”. Life does not stop without them, yet they can be extremely helpful, especially to individuals with compromised health.  These are more often metabolic intermediates than recognised nutrients, but they can be extraordinarily valuable for organ-directed therapy. Many of these involve up-to-the minute discoveries.  We teach about phytonutrients in foods (eg carotenoids, flavonoids, proanthocyanidins, isothiocyanates, organic sulphides and curcuminoids) and about the possibilities, when necessary, to provide them in supplement form. Herbs are covered too in their special role of support-therapy to Nutritional Therapy, usually in an organ-directed or system-directed role. Echinacea, silymarin, aloe, ginkgo, bromelain and St John’s Wort are just examples of these herbs.  We also teach the use of herbal combinations for specific purposes. This wide choice of “extra” items is the subject of specific instruction in this Folder. FOLDER 12 TREATING NAMED MEDICAL CONDITIONS - PART 1 Folder 9 makes it plain that, because this is a holistic discipline, the named medical condition is generally low on the hierarchy of treatment criteria.  Although that is generally the case, the extent to which it holds good may depend upon how advanced is the particular disease condition. At all events, the practitioner does need a degree of disease-related training, which is provided in this Folder and the next.  Some 180 different medical conditions or classes of conditions, mostly chronic, are addressed. Special space is provided to cover fully selected topics that are of key importance in an alternative medicine practice, such as obesity, alcoholism, allergies and the menopause.  We also provide you with specific treatment guidance with the proviso that whole-person treatments and organ-system related treatments either take priority or are provided alongside.  Where appropriate some insights are given into the prior allopathic treatments and environmental and social conditions that may cause or exacerbate the listed conditions.  This provides for the patient’s circumstances and lifestyle to be adjusted in rather specifically apt directions. The main categories in this Folder are: circulatory, rheumatic and digestive diseases, along with obesity, alcoholism and immunity states including autoimmunity and allergies.  All the disease conditions addressed are closely studied from the standpoint of orthodox pathology as well as their Nutritional Therapy treatment.  Hence Folders 12 and 13 in their own right amount to a course in the medical science of pathology and this represents a substantial expansion over earlier versions of the course.  These Folders will constitute invaluable reference material for use when you have set up in practice. FOLDER 13 TREATING NAMED MEDICAL CONDITIONS - PART 2 This Folder continues the work started in Folder 12.  Here included are diseases of the nervous system and brain, skin, reproductive system, urinary system, endocrine system, liver/gallbladder, respiratory system, eye, ear, mouth, nose and bone. Also included are psychological and systemic diseases (including ME), infectious diseases and some directly nutritional diseases. The detailed attention to pathology is maintained throughout. During the course of Folders 10-14 inclusive, students undertake no less than 12 cases on their own, covering full data-collection, analysis and interpretation, with prescription of diet and supplements.  Together with the 36 case histories studied in earlier Folders this gives 48 case histories studied FOLDER 14 MONITORING TREATMENT, THE THERAPEUTIC RELATIONSHIP AND PRACTICE MANAGEMENT Having got the treatment going, there is a need for specific instruction in the on-going task of monitoring the patient’s condition and reacting accordingly with adjustments to the therapy.  Patient and practitioner alike have to be aware that the first prescription is likely to be just the start of a process. Reading the signs of change looms large in this instruction and familiarization. Responding to them is the second part. Here there is a need to understand the terms “intensity” and “direction” in therapy. “Intensity” refers to the degree of healing and naturopathic pressure being applied and “direction” refers to the aims of the particular choice of treatment being applied.  You will learn to distinguish between situations that call only for a change of “level” and those that call upon you to rethink and change “direction” when the patient’s progress levels off as this may then initiate a new burst of healing changes.  Another way to break out from the “plateau” situation is to assess the exact nutrient composition of the whole diet – an action that is too detailed and time-consuming to do with every patient and usually not needed.  A part of the Folder is about drugs, when and when not to encourage their use, and how to manage the drug-dependent patient. You need to acquire at least a passing familiarity with the main classes of prescription drugs, which are explained in this Folder. This Folder also provides information on Laboratory testing procedures that may be recommended to patients. Finally we offer subjects of crucial importance to working practitioners, namely a study of “The Therapeutic Relationship” and “Practice Management – Running The Practice as a Business”. TESTIMONIALS Here's what students have to say about the course Grace Kingswell, Nutritional Therapist UK "I was recommended Plaskett by my own functional medicine practitioner. I knew that if she was recommending it, it would be worthwhile. I wanted a full body overview and not a “match the supplement to the symptom” approach, and that is certainly what the Plaskett Dip;oma in Nutritional Medicine course delivered. I wanted to be qualified to run my own business as a practitioner afterwards, and it is the most complete and highest level course that the Plaskett College offer. My knowledge of naturopathy and nutritional medicine was pretty solid before I started due to personal experience, but I’ve really built on this now and feel confident that I know how to help others. I’ve also learnt a lot more of the biochemistry behind the science too. The study experience was really good, but it’s a lot of self-motivation, and if you don’t have that then it might be touch to finish it, as it’s completely self-driven". Ben C Alberts, Director South African Institute of Behavioural Nutrition South Africa The Plaskett Nutritional Therapy Diploma was one of the most rewarding programmes of my life. Apart from the media hype around healthy living it is only after the completion of a proper programme that one truly start to understand the intricacy of the human body and what healthy living really is. Within the Plaskett programme the combination of nutrition, pure science and a naturopathic view provided me with a completely new perspective on health management. Against a fairly orthodox background it took me some time within the programme to understand the true principles, and once realized fundamentally changed the way I view personal health management. Throughout the programme the support from my tutor was phenomenal with concise and very valued feedback, and certainly at exceptional detail. The course content was of a high standard and must not be underestimated in both volume and complexity. For me personally, the programme delivered immense value and I will recommend it to any of my peers and clients. Diane Brough, Nutritional Therapist Canada When I first started thinking about taking a course in nutrition, I was living in Botswana, in Africa. I was looking for a college that would offer me the support and guidance that is so important for long distance learning. I’m probably one of the college’s longest registered students because my family moved to five different countries during my studies! I am very thankful for the college’s patience and continued support. Plaskett College impressed me with their personal approach to the course and the fact that all modules were composed by Dr. Lawrence Plaskett, a medical research biochemist and the college’s Founder and Principal. I studied the Diploma in Nutritional Medicine because my plan was to have my own practice. I practised at a herbal clinic as a Nutritional Therapist and Iridologist after I completed my diploma, but then decided to study massage therapy, so put my practice aside while at school. I recently established Revitalife Therapeutics and offer massage therapy, manual lymphatic drainage, nutritional therapy and iridology. Vittoria Viglietti, Nutritional Therapist & Founder of Nutriwild Namibia I chose Plaskett College because I really wanted to make a difference where natural medicine was concerned. After losing my father to Cancer, and experiencing malpractice with all the orthodox medicine we followed, this pushed me even more to pursue an in-depth education in nutritional medicine. I chose Plaskett College’s, Nutritional Medicine Course, because I found this to be very informative for anyone interested in perusing a future in the field of Natural medicine and Nutritional Therapy. My studies have been such a memorable journey for me. I started studying just over 2 months, after losing my father. A very difficult time in my life. The course I chose to do with Plaskett would take me 4 years to complete. I am in my 5th year (nearly my 6th year), doing this particular course and I have only experienced encouragement, understanding of my situation and support from the college to continue to complete the course in my time. I could not show more gratitude towards them for this. I did not expect that after losing my father my life would hit lots unforeseen hurdles, causing my study time to suffer greatly. Yet, through all this, Plaskett College only showed me more support and encouragement to persist with my studies.

Nutritional Therapy Diploma
Delivered OnlineFlexible Dates
£125 to £1,995

Carbon Capture, Utilization & Storage (CCUS) Well Design & Monitoring

By EnergyEdge - Training for a Sustainable Energy Future

About this training course This 3-days training will provide a comprehensive review of integrity of wells exposed to carbon dioxide (CO2) in the context of Carbon Capture Utilization for enhanced oil recovery and Storage (CCUS). CO2 geological storage is a proven technology to reduce greenhouse gas emissions from sources such as coal power plants, cement kilns and steel mills. Wells are widely considered the most critical containment element, especially older wells that are not used to inject CO2 or monitor the plume evolution in the storage reservoir. The main reason for this perceived risk is the high corrosion rate of carbon steel when exposed to wet CO2, and the tendency of Portland cement to react with the gas. The training course advanced contents build on 15 years' experience in carbon storage, both in the development and deployment of technologies. First-hand, in-depth knowledge of the subject will allow us to debunk myths and focus on the real challenges of wells encountering CO2. Training Objectives After the completion of this training course, participants will be able to: Explain the CCUS market drivers Examine the behavior of CO2, on surface and in the reservoir Diagnose cement defects and design repairs Understand the limits of Portland cement Assess the benefits of different technologies and materials Realize why geology is a dominant factor in cement performance Critically choose the most appropriate monitoring techniques Classify aging processes of cement, steel, and rock when exposed to CO2 Assess the risk of existing wells if they encounter the CO2 plume Examine recent advances in real-time approaches to the production monitoring and lift management Target Audience This training course is suitable and will greatly benefit: All surface technical personnel such as process engineers & technologists Facility engineers, production engineers & technologists Drilling engineers and Well engineers Design engineers and Integrity engineers P&A engineers and Cementing engineers Geologists Senior management executives will benefit from this training as covers an overview of the technical and commercial details of CO2 capture technologies and risks involved. Course Level Intermediate Training Methods The training instructor relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all the topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught in their own organization. Course Duration: 3 days in total (21 hours). Training Schedule 0830 - Registration 0900 - Start of training 1030 - Morning Break 1045 - Training recommences 1230 - Lunch Break 1330 - Training recommences 1515 - Evening break 1530 - Training recommences 1700 - End of Training The maximum number of participants allowed for this training course is 20. This course is also available through our Virtual Instructor Led Training (VILT) format. Trainer Your expert course leader is an engineer with a passion for well integrity and possesses 28 years of international experience in field operations, technology development and management in the oil & gas and carbon storage sectors. Since 2018 he is program chair of the Well Integrity Technical Section of the Society of Petroleum Engineers (SPE). He is also author or co-author of 31 technical papers, a book chapter on CO2 geological storage and 7 patent applications. He delivers training on well integrity, plug and abandonment, asset integrity, risk management and QHSE across the Eastern Hemisphere, and carries out active research on harnessing geological barriers, modeling leaks through cement, and quantifying methane emissions from oil & gas wells. He has extensive expertise in: Well integrity, cementing, corrosion, upstream oil & gas (drilling, completion), carbon capture and storage, mathematical modeling, risk management, reliability, HSSE (health/safety/security/environment), asset integrity, management systems, sustainable development, project management, portfolio management, training, and technology development and innovation. He has personally worked on CCS projects in Europe (France, Germany, Netherlands, Norway), Algeria, Japan and USA. Partial list of companies that have benefited from the trainer's expertise: Vermilion Energy Geostock Aker BP Shell Statoil ENI TNO Geogreen Wintershall Archer INA and many more Recent CCS consulting track record: Schlumberger Total Oxand TNO THREE60 Energy and others POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information post training support and fees applicable

Carbon Capture, Utilization & Storage (CCUS) Well Design & Monitoring
Delivered in Internationally or OnlineFlexible Dates
£2,790 to £3,245

Hydrogen - Technology, Economics and Business Cases

By EnergyEdge - Training for a Sustainable Energy Future

About this Virtual Instructor Led Training (VILT) Asia Pacific is set to be the largest and fastest growing Hydrogen market globally. This growth is driven by decarbonisation of energy-use, ammonia production and rising demand of fuel cell electric vehicles. Hydrogen as a fuel has outstanding energy carrying capacity and many application possibilities ranging from Petroleum refinery, Ammonia and Methanol production, Transportation and Power generation. Although the current petrochemical market segment will remain strongest in the near future, it is the transport and power sector which spurs the vision of a massive market takeoff in the next decade. The ever-rising share of renewable energies require flexible and scalable storage solutions, which in turn offers many additional revenue streams beyond pure electricity sales. Adding to this the strong impetus towards decarbonization of the transport sector from cars, trucks, trains to ships and even airplanes creates the breed for an exciting and yet untapped market potential. This course aims to clarify and assess the hydrogen business case along its value chain and versatile market applications. Training Objectives Understanding current hydrogen market status and recent developments Major drivers and inhibitors influencing the growth of the market Understanding and comparing various production technology processes Challenges and solutions in transport, distribution and storage of hydrogen Mapping the many petrochemical, energy and transport applications Analyse business cases from around the world and understand their economics Target Audience Project developers Equipment Manufacturers Oil, Gas and Petrochemical sector companies IPPs and utilities Transport sector companies and port operators Policy makers and regulators Investors and lenders Course Level Basic or Foundation Training Methods The VILT will be delivered online in 4 half-day sessions comprising 4 hours per day, including time for lectures, discussion, quizzes and short classroom exercises. Additionally, some self-study will be requested. Participants are invited but not obliged to bring a short presentation (10mins max) on a practical problem they encountered in their work. This will then be explained and discussed during the VILT. A short test or quiz will be held at the end the course. Trainer Your expert course leader is an internationally renowned energy communicator and business educator, focused on the interconnected clean energy transition topics of renewable power, energy storage, energy system electrification and hydrogen. His own independent technology tracking, market assessment and opportunity/risk analysis is delivered to clients through a mix of business advisory work, commissioned content, small-group training (online & in-person), and one-to-one executive coaching (online). In the hydrogen sector, he is currently lead consultant and trainer to the World Hydrogen Leaders network, and writer of their 'This Week in Hydrogen' news column. He is also co-presenter of the 'New Energy Chinwag' podcast, which regularly covers hydrogen-related issues. During more than 15 years as an independent energy expert, he has helped companies from large multinationals to innovative start-ups - totalling assignments in over 30 countries across 5 continents. Most recently, he has presented clean energy training in locations as diverse as Singapore, the UK, South Africa, The Philippines, the USA, Mexico, Spain and Dubai - and, in recent times of course, online to international audiences from across the world. Prior to this, he was Research Director for over 10 years at Informa, a $9 billion business intelligence provider; where he drove new market identification, analysis and project deployment work, and managed teams in the UK and US. He has a strong science background, holding a 1st Class Honours degree in Natural Sciences from the University of Cambridge, a PhD in Earth Sciences and a further Diploma in Economics & Sustainability from the UK's Open University. POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information about post training coaching support and fees applicable for this. Accreditions And Affliations

Hydrogen - Technology, Economics and Business Cases
Delivered in Internationally or OnlineFlexible Dates
£1,719 to £1,999

3Com switches

5.0(3)

By Systems & Network Training

3Com switches training course description A hands on course covering the product specifics of 3Com switches. Installation, configuration, maintenance and troubleshooting are all covered in a practical oriented way. What will you learn Install 3Com switches. Use the command line interface and the web based interface to manage 3Com switches. Configure and troubleshoot 3Com switches. Configure and troubleshoot 3Com switches. Perform software upgrades. 3Com switches training course details Who will benefit: Anyone working with 3Com switches. Particularly aimed at engineers and technicians supporting 3Com switches. Prerequisites: None. Duration 2 days 3Com switches training course content Introduction How Ethernet works with hubs, How Ethernet works with switches. Installing 3Com switches. Hands on Building a network with a hub, building a network with a 3Com switch. Basic troubleshooting The 3Com switch range, LEDs, cabling issues, system resets, default settings. Hands on Building a network with multiple 3Com switches. Configuration methods Managed vs. unmanaged switches, Console port access, telnet, web based access, SNMP, saving configurations, NVRAM, switch stacks. Hands on Accessing the switch using the console, IP address configuration, telnet. Console interface Default users, passwords, the menus, menu options, online help, CLI commands. Hands on Setting passwords, displaying the switch configuration. Web based interface Getting started, basic format. Hands on Configuring the switch using the web interface. Port configuration Common port configuration tasks, port aggregation, resilient links. Hands on Configuring ports. STP configuration What is STP? Configuring STP. Hands on Enabling and disabling STP, configuring STP. VLAN configuration What are VLANS? 802.1Q, tagged/untagged, creating VLANS, applying VLANS. Hands on Setting up VLANS, setting up 802.1Q, Inter VLAN traffic. Housekeeping TFTP, software upgrades Hands on Software upgrade. SNMP SNMP configuration, Transcend, other NMS's. Hands on Using SNMP to manage a 3Com switch, putting it all together: troubleshooting.

3Com switches
Delivered in Internationally or OnlineFlexible Dates
£2,477

D-Link switches

5.0(3)

By Systems & Network Training

D-Link switches training course description A hands on course covering the product specifics of D-Link switches. Installation, configuration, maintenance and troubleshooting are all covered in a practical oriented way. What will you learn Install D-Link switches. Use the command line interface and the web based interface to manage D-Link switches. Configure and troubleshoot D-Link switches. Perform software upgrades and maintain configurations using TFTP. D-Link switches training course details Who will benefit: Anyone working with D-Link switches. Particularly aimed at engineers and technicians supporting D-Link switches. Prerequisites: None. Duration 2 days D-Link switches training course content Introduction How Ethernet works with hubs, How Ethernet works with switches. Installing D-link switches. Hands on Building a network with a hub, building a network with a D-Link switch. Basic troubleshooting The D-Link switch range, LEDs, cabling issues, factory resets, default settings. Hands on Building a network with multiple D-link switches. Configuration methods Managed vs. unmanaged switches, Console port access, telnet, web based access, SNMP, saving configurations, NVRAM, switch stacks. Hands on Accessing the switch using the CLI, IP address configuration, telnet. Command line interface Users, privileges, the CLI, online help. Hands on Basic commands, user accounts, displaying the switch configuration. Web based interface Getting started, basic format. Hands on Configuring the switch using the web interface. Port configuration Common port configuration tasks, link aggregation. Hands on Configuring ports. STP configuration What is STP? 802.1D vs. 802.1W (RSTP), configuring STP. Hands on Enabling and disabling STP, changing STP versions, configuring STP. VLAN configuration What are VLANS? 802.1Q, tagged/untagged, creating VLANS, applying VLANS. Hands on Setting up VLANS, setting up 802.1Q, Inter VLAN traffic. Housekeeping TFTP, upload download, updating firmware, updating configuration files, BOOTP/DHCP for IP addresses. Hands on Using TFTP to configure a D-Link switch. SNMP Switch configuration, D-View, other NMS's. Hands on Using SNMP to manage a D-link switch putting it all together: troubleshooting.

D-Link switches
Delivered in Internationally or OnlineFlexible Dates
£2,477

HP iMC for engineers

5.0(3)

By Systems & Network Training

HP iMC for engineers training course description A hands on course focusing on network management using HP iMC on Microsoft Windows or UNIX. What will you learn Describe the network management architecture. Use HP NNMi. Diagnose faults using HP iMC. Recognise the MIB structure. HP iMC for engineers training course details Who will benefit: Network administrators. Network operators Those wishing to find out more about how their NMS works Anyone wishing to implement NFV using OpenStack. Prerequisites: Introduction to Virtualization Duration 2 day HP iMC for engineers training course content Network management What is network management? Benefits, issues. Getting started with HP iMC Starting HP iMC, IP discovery, IP monitoring, controlling IP discovery. Hands on Initial HP iMC configuration. Using HP iMC Viewing devices, Device view, IP view, network view, polling. Hands on Using HP iMC. Agents Configuring Cisco devices for SNMP support, communities, traps, syslog. Hands on Configuring network devices for HP iMC. Parts of SNMP SNMP architecture, MIBs, The protocol. HP iMC SNMP configuration. Hands on HP iMC SNMP configuration. MIBs The MIB2 groups, additional MIBs, MIB compilers, vendor MIBs. HP iMC MIB loader and browser. Hands on MIB browsing. Monitoring devices Polling, obtaining MIB information. Hands on HP iMC performance management. Configuration and change management Configuration templates, software library, configuration compare, configuration audit and reports. Hands on Using the configuration center. Reports Report templates, Real time reports, scheduling reports. Hands on Using real time reports. HP iMC fault management Alarms, polling, fault management, setting thresholds and configuring traps. Syslog. Hands on Working with alarms. Security alarms.

HP iMC for engineers
Delivered in Internationally or OnlineFlexible Dates
£2,477

Definitive IP CCTV for engineers

5.0(3)

By Systems & Network Training

IP CCTV training course description This hands on course covers the technologies used in IP CCTV systems. The focus is not on operating or cabling but more advanced configuration and troubleshooting. Hands on sessions are used to reinforce the theory rather than teach specific manufacturer equipment. What will you learn Install IP CCTV. Configure IP CCTV. Explain how IP CCTV protocols work. Troubleshoot IP CCTV. IP CCTV training course details Who will benefit: Technical staff working with IP CCTV. Prerequisites: None. Duration 2 days IP CCTV training course contents Introduction What is IP CCTV? Camera types, Video, Audio, two way audio, IP CCTV software. Hands on Installing IP CCTV. CCTV architecture Components, servers, storage, LANs, WANs. Centralised versus decentralised. Hands on Using IP CCTV. Ethernet What is Ethernet? Ethernet cabling, Inside versus outside, hubs, switches, PoE, VLANs. Hands on Ethernet connectivity. Wireless WiFi, other wireless solutions, 802.11, variations, frequencies, Access Points, bridges, repeaters. WEP, WPA, WPA2, Hands on WiFi Configuration Ways to configure, IP addresses, subnet mask, default gateway, DHCP, NAT, access from the Internet. Hands on CCTV configuration. How IP CCTV works TCP, UDP, IP, RTP, RTSP, SIP, PTZ, NTP, Wireshark. Port numbers. Hands on Using Wireshark to troubleshoot IP CCTV. Network issues with IP CCTV Bandwidth, video resolution, compressions, codecs, frame rates, audio. QoS. One way versus two way traffic. Hands on Analysing CCTV traffic. Security VPNs, Firewalls. Hands on CCTV through a firewall. Troubleshooting ping, tracert, arp, ipconfig, pathping, tracert. Cable issues, switch issues, WiFi issues.CCTV issues. Hands on CCTV troubleshooting. Miscellaneous Design issues, multicasting, gateways. DVR technology. Calculating storage requirements.

Definitive IP CCTV for engineers
Delivered in Internationally or OnlineFlexible Dates
£2,477