122 Educators providing Professional Development courses near Newcastle

Course Introduction Our Venepuncture and Phlebotomy training equips delegates with the skills and knowledge needed to take blood safely. Please note: this course is for health care professionals and nurses only. About this event Applicable to Nurses, Health Care Assistants and Phlebotomists in primary care, the community, hospitals or nursing homes, this course is interactive and involves a demonstration session on performing blood tests. Our venepuncture training will give delegates the theoretical and practical awareness to undertake a competence assessment framework in the workplace that will deem them competent to take blood safely and appropriately. Each delegate will receive a competence-based framework to allow them to do this. Course Aims Identify and describe equipment used for routine venepuncture Be able to assess and select suitable sites used for venepuncture as well as locations to avoid Describe and utilize the required steps to perform routine venepuncture Describe actions that ensure safety during performance of a venepuncture Identify suitable vein selection and identify factors influencing this Understand relevant professional and legal issues Be able to identify potential complications Understand anatomy and physiology and correct vein selection Be familiar with equipment and exercise choice in using most appropriate equipment Practice safely in terms of infection control and waste management Become skilled and competent at phlebotomy To recognise any complications arising and be able to take the appropriate action Course Content Background and importance of training and competence Supervision and practice Scope and responsibilities Accountability Professional and legal issues Consent and capacity What is phlebotomy? Tools of the trade-equipment Needles and patient safety Blood collection systems and devices Syringes and when to use them Blood collection tubes Labelling Anatomy and physiology Vein Selection: - Identification of Veins - Arm Veins - Hand Veins Vein assessment Unacceptable sites for venous collection Venepuncture procedure Attempts Order of Fill Specimen collection procedures Specimen handling post-phlebotomy Personal protective equipment Needle stick injuries Legislation-EU Directives Disposal Needle phobias Dealing with anxiety/fainting etc. Practical session Potential Complications (including infection control) Practical Application - techniques and troubleshooting Case scenarios Troubleshooting Audit Who should attend / would be applicable? Nurses HCAs Those interested in careers as Phlebotomists AB Health Group awards CPD points / certificate of attendance for each course. If you would prefer an accredited certificate by our accrediting body Aim Qualifications we can organise this. The charge for the certificate including postage is £30.00. Annie Barr AB Health Group Organiser Description Annie Barr is a leading provider of high quality, accredited healthcare training. With a selection of engaging healthcare training that has been developed by experts to equip you and your workforce with the skills, knowledge and competence needed to provide compassionate and high quality care.

Clinical skills, HCAs, Nurses, Chronic disease

Overview Objective Describing the HR role and Strategies Describe different approaches to employee training Describe different approaches to professional development Describe different approaches to performance appraisals Summarize different forms of employee compensation

About this Training Course This 5 full-day course covers all the main elements of IChemE's Process Safety Competency framework: culture, knowledge and competence, engineering and design, human factors, systems and procedures, and assurance. Participants will achieve at least the second level of competence 'Basic Application', which is defined as 'Performs fundamental and routine tasks. Requires occasional supervision. Increased functional expertise and ability. Works with others.' This course examines the interrelation of the various techniques of process safety for analysing and managing process hazards in the hydrocarbon and chemical processing industries. There is a particular emphasis on engineering design aspects with extensive participation in individual and group exercises, tutored exercises and video case studies throughout the course to underpin key learning points. The learning is consolidated in a comprehensive case study and requires collaboration between members of each syndicate. This course has been reviewed and approved by the Institution of Chemical Engineers. IChemE is the global professional membership organisation for chemical, biochemical and process engineers and other professionals involved in the chemical, process and bioprocess industries. Their knowledge of professional standards, close involvement with industry, education and regulators, and their expertise as a leading global training provider, means they are uniquely positioned to independently assess and approve training courses and professional development programmes across the world. Training Objectives By the end of this course, participants will be able to: Acquire the underpinning knowledge required to achieve process safety competency Gain a comprehensive understanding of process safety management Understand the concept of the safety life cycle of a process plant from conceptual design onwards including operation, maintenance and modification Understand the hazard scenarios associated with a process plant Understand how risks can be controlled by hardware and procedural measures Identify and analyse hazard causes and consequences Recognise when specialist analytical expertise is required Generate effective and appropriate measures to reduce risks Justify and communicate practical solutions to non-technical personnel Explain the rationale for process safety measures to decision makers Target Audience This course is suitable for process industry professionals who need to acquire a comprehensive understanding of process safety management, those moving into process safety positions or those who wish to broaden their process safety knowledge within their existing discipline. It is particularly suited for anyone involved in the design, operation, modification or maintenance of a major hazard installation. This includes: Supervisors, operators and maintainers in Oil & Gas, Petrochemical and Chemical industries, process, mechanical and chemical engineers and technicians Design engineers, project engineers and HSE managers Control, automation and instrumentation engineers It will also demonstrate a substantial understanding of process safety for those engaged in Continuous Professional Development or aiming for the Chartered Engineer status. Course Level Basic or Foundation Trainer Your expert course leader has 50 years' experience in chemical and process safety engineering. His early career included 20 years in design and project engineering with various fine chemical and pharmaceutical companies where he designed chemical processes, specified plant equipment and selected materials for highly corrosive and toxic processes, often where textbook data was not available. This was followed by 10 years in offshore oil and gas design projects where he was responsible for setting up a Technical Safety group to change design safety practices in the aftermath of the 1988 Piper Alpha disaster. In recent years, he has been called upon to conduct various offshore and onshore incident investigations. His career has given him experience in project engineering, project management, process design and operations, safety engineering and risk management. He is a Fellow of the UK Institution of Chemical Engineers. He served on the Scottish Branch committee, and was elected chairman for a two-year term in 1991. He has also been chairman of the Safety and Reliability Society - North of Scotland Branch. He has delivered training courses in Process Hazard Analysis (HAZOP and HAZID), Process Safety Management, Hazard Awareness, Risk Assessment, Root Cause Analysis, Failure Modes & Effect Analysis and has lectured on Reliability Analysis to the M.Sc. course in Process Safety and Loss Prevention at Sheffield University. In addition to delivering training courses, he currently facilitates HAZOP / HAZID / LOPA studies and undertakes expert witness roles advising lawyers engaged in contractual disputes, usually involving the design or construction of chemical plants or Oil & Gas production facilities, or criminal prosecutions. POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information post training support and fees applicable Accreditions And Affliations

Overview The protocol is one of the most modern terms in terms of language but very old in terms of history as the word protocol is a development of the word of the conventions and understandings this is in the world of politics and at the international level, but within the field of business management has become the formulation of protocols is one of the important and necessary skills and very necessary for people who wish to They must take administrative duties. Through this course, we are going to introduce the rules and practices of gentle behaviour, the best practices for communication with others, and good reception, since all such related matters represent a large portion of our personality.

Overview Performance management is a continuous process which involves making sure the performance of your employees contributes to organisational and team goals. Having effective employment management in place helps everyone in the organisation to know what the business is trying to achieve, the skill and competencies they need to fulfil their role and how they can develop their performance to develop the organisation.

Overview The training objective is to build on existing knowledge of Strategic Public Relations, Apply the tactical skills required for working in Strategic Public Relations, Capitalise on developments in technology, Manage the key aspects of protocol, Learn tips, tools and techniques to arrange business travel, Meet the expectation of those involved in protocol and travel arrangements.

Overview This course highlights Overview of upstream asset management HSE issues and energy project investment analysis Exploration and appraisal well decisions Field development decisions Asset optimization

Overview Objectives Define Policies and Procedures Differentiate between Policies and Procedures Explain the importance of Policies and Procedures Build and understand the SOP (Standard Operating Procedures) Define the roles and responsibilities of employees in various departments Abide by the Code of Conduct, the acceptable behaviour standards Justify how the Policies and Procedures help employees safeguard their self-respect Give equal opportunities to all the employees

Overview To achieve maximum effectiveness, managers and professionals must continually expand their business knowledge and sharpen their skills. This program is designed to achieve this goal in a time-efficient manner. Integration of Downstream Refining and Petrochemicals to achieve greater efficiencies is yet another critical factor in this business which will be covered in this course