6859 Courses in Manchester delivered Live Online

Duration 4 Days 24 CPD hours This course is intended for This course is intended for: System engineers Technical support personnel Channel partners and resellers Overview After taking this course, you should be able to: Describe Cisco DWDM platform basics Describe DWDM network topologies Describe the management software used for managing Cisco DWDM networks List the different hardware components of the Cisco ONS and Cisco NCS DWDM systems Provision nodes and circuits in a Cisco DWDM network Perform node and multishelf configurations Implement SMR-based rings Provision optical circuit protection mechanisms Configure Any Rate cards Describe the function of Raman amplifiers Perform basic maintenance and troubleshooting of a Cisco DWDM network The Cisco Optical Technology Intermediate (OPT200) v3.0 course is designed to teach you the skills necessary to deploy the Cisco© Optical Networking System (ONS), 15454 Multiservice Transport Platform (MSTP), and Cisco Network Convergence System (NCS) 2000 Series Dense Wavelength-Division Multiplexing (DWDM) networks from installation to protection. Through a combination of lecture and hands-on experience, you will learn installation, configuration, circuit protection, maintenance, and basic troubleshooting using the Cisco Transport Controller for the Cisco ONS 15454 M6 and M12 shelves, and for the Cisco NCS 2016 shelf.Additionally, in this course you will review DWDM terminology and components, explore available chassis and cards, and discuss hardware installation. You will learn to use the Cisco Transport Controller server software to connect to the nodes, perform network turn-up and circuit creation, and deploy linear and single-module ROADM (SMR) DWDM multishelf topologies. Using this software, you will also configure Raman amplifiers and Any Rate cards, and configure protected and unprotected circuits. The course covers a variety of card options: controllers, transponders, multiplexer-demultiplexer, add/drop, Raman amplifiers, and Cisco Any Rate muxponder cards. You will use the various cards to configure terminal, amplifier, mesh, split, Optical Service Channel (OSC) regenerator, and Reconfigurable Optical Add/Drop Multiplexing (ROADM) nodes. Finally, you will learn how to use many of the tools and features available with the Cisco Transport Controller to perform maintenance, testing, and basic troubleshooting of your optical network. Course Outline DWDM Optical Platform Foundation Chassis and Cards Hardware Installation Node Turn-Up and Circuit Creation Node and Multishelf Configurations SMR-Based Rings 10Gb Circuit Protection Any Rate Card Configuration Raman Amplifiers Maintenance and Basic Troubleshooting Additional course details: Nexus Humans Cisco Optical Technology Intermediate v3.0 (OPT200) training program is a workshop that presents an invigorating mix of sessions, lessons, and masterclasses meticulously crafted to propel your learning expedition forward. This immersive bootcamp-style experience boasts interactive lectures, hands-on labs, and collaborative hackathons, all strategically designed to fortify fundamental concepts. Guided by seasoned coaches, each session offers priceless insights and practical skills crucial for honing your expertise. Whether you're stepping into the realm of professional skills or a seasoned professional, this comprehensive course ensures you're equipped with the knowledge and prowess necessary for success. While we feel this is the best course for the Cisco Optical Technology Intermediate v3.0 (OPT200) course and one of our Top 10 we encourage you to read the course outline to make sure it is the right content for you. Additionally, private sessions, closed classes or dedicated events are available both live online and at our training centres in Dublin and London, as well as at your offices anywhere in the UK, Ireland or across EMEA.

Duration 4 Days 24 CPD hours This course is intended for The primary audience for this course is as follows: Technical professionals who are responsible for installation, deployment, and maintenance of the Cisco ONS 15454 MSTP network Network operations, planners, and designers Network operations engineers Overview Upon completing this course, the learner will be able to meet these overall objectives: Connect to a Cisco ONS 15454 MSTP chassis using Cisco Transport Controller (CTC) Identify Node configurations according to card population Provision DWDM circuits using the Cisco Transport Controller (CTC) Conduct performance monitoring, alarm verification, and fault isolation Provision M12 WSS in linear and M6 SMR nodes in ring topologies Configuration options for the any rate muxponder and crossponder Perform Raman amplifier initialization Isolate optical network issues In this course, you will learn the skills necessary to deploy a Cisco Network Convergence System (NCS) 2000 Series network. You will also learn how to perform node turnup. The course covers three shelf types, the Cisco ONS 15454 M12 Multiservice Transport Platform (MSTP), NCS 2006, and NCS 2002. You will learn how to deploy linear and ring dense-wavelength-division-multiplexing (DWDM) topologies. The course covers multiplexer-demultiplexer cards, Erbium-doped-fiber amplifier cards, Raman amplifiers, transponder cards, and the newest Cisco Any Rate muxponder cards and crossponder cards. These cards are used in terminal, amplifier, and reconfigurable optical add-drop multiplexer (ROADM) node configurations. You configure wavelength-selective switch (WSS) linear and single-module ROADM (SMR) rings. This Optical Technical Training Intermediate course covers 10-gigabit unprotected circuits and 10-gigabit protection using Y-cable, optical channel transport unit-2 (OTU-2), and protection switch module (PSM) cards. Learn more about this NCS 2000 training course below. Course Outline Lesson 1: CTC Operations Lesson 2: MSTP Topologies Lesson 3: Shelf and Card Installation Lesson 4: Fiber jumper installation Lesson 5: Linear Configurations Lesson 6: Node Turn-Up Lesson 7: Optical Channel Network Connection Circuits Lesson 8: Transponder and Optical Channel Client Connection Circuits Lesson 9: Multishelf Lesson 10: MSTP M6 SMR-Based Rings Lesson 11: 10-Gigabit Muxponder and Transponder Cards Lesson 12: 10-Gigabit with Y-Cable Protection Lesson 13: Alternative 10-GB Protection (PSM and OTU-2) Lesson 14: Any Rate Muxponder and Crossponder Lesson 15: Raman Amplifier Lesson 16: 40- and 100-Gigabit Transponder and Muxponder Lesson 17: Troubleshooting Additional course details: Nexus Humans Cisco Optical Technology Intermediate (OPT200) training program is a workshop that presents an invigorating mix of sessions, lessons, and masterclasses meticulously crafted to propel your learning expedition forward. This immersive bootcamp-style experience boasts interactive lectures, hands-on labs, and collaborative hackathons, all strategically designed to fortify fundamental concepts. Guided by seasoned coaches, each session offers priceless insights and practical skills crucial for honing your expertise. Whether you're stepping into the realm of professional skills or a seasoned professional, this comprehensive course ensures you're equipped with the knowledge and prowess necessary for success. While we feel this is the best course for the Cisco Optical Technology Intermediate (OPT200) course and one of our Top 10 we encourage you to read the course outline to make sure it is the right content for you. Additionally, private sessions, closed classes or dedicated events are available both live online and at our training centres in Dublin and London, as well as at your offices anywhere in the UK, Ireland or across EMEA.

Duration 3 Days 18 CPD hours This course is intended for This course is ideal for developers, engineers, and others including: Cloud administrators , Cloud solution architects , Customer sales engineers , DevOps engineers , Sales engineers , Systems engineers, Technical solutions architects. Overview After taking this course, you should be able to: Explain business and technical challenges of going to the cloud Understand benefits of an application-centric hybrid cloud multicloud management platform Navigate Cisco CloudCenter Suite architecture Understand Cisco CloudCenter Suite administrative capabilities including cloud management, multi-tenancy, governance, and policy enforcement Describe application lifecycle management and provisioning in cloud Describe how to use Cisco CloudCenter Suite to manage the workloads in multicloud The course, Mulitcloud Automation and Orchestration with Cisco CloudCenter Suite (CLDAO) v1.0 teaches you how to configure simplified orchestration and workflow automation that provides seamless integration within the Cisco© CloudCenter suite. Through lessons and hands-on experiences, you will learn to use the tools of the CloudCenter Suite to streamline business processes, automate tasks, and increase efficiency in business processes. Introducing Cisco CloudCenter Suite Action Orchestrator Cisco CloudCenter Suite Architecture Defining Action Orchestrator User Management and Security Considerations Cisco CloudCenter Suite User Management and Security Defining Cisco CloudCenter Suite Action Orchestrator Adapters Action Orchestrator Adapter Creation Examining Action Orchestrator Integrations and Supported APIs Cisco CloudCenter Suite Action Orchestrator APIs

Duration 2 Days 12 CPD hours This course is intended for This course is designed for network and software engineers who hold the following job roles: Network administrators Network operators Overview After taking this course, you should be able to: Explain the benefits of using Cisco DNA Center in a traditional, enterprise network Explain at a detailed level the Cisco DNA Center Assurance system architecture, functional components, features, and data-processing concepts Explain the health scores, metrics, and strategies that you use for monitoring network devices, clients, and applications with Cisco DNA Assurance Describe how Cisco DNA Center Assurance analyzes the streaming telemetry and collected data, correlates the data, performs root cause analysis, and displays detected issues, insights, and trends Describe the Cisco DNA Center Assurance troubleshooting tools, mechanisms, strategies, and scenarios to proactively detect and resolve wireless network, client, and application issues and pinpoint the root cause Deploy and configure Cisco DNA Center to use Assurance features for monitoring and troubleshooting network devices, clients, and applications The Leveraging Cisco Intent-Based Networking DNA Assurance (DNAAS) v2.1 course provides you with the skills to monitor and troubleshoot a traditional brownfield network infrastructure by using Cisco© Digital Network Architecture (Cisco DNA?) Assurance. The course focuses on highlighting issues rather than on monitoring data. The advanced artificial intelligence and machine learning features within Cisco DNA Assurance enable you to isolate the root cause of a problem and to take appropriate actions to quickly resolve issues. Cisco DNA Assurance can be used to perform the work of a Level 3 support engineer. Course Outline Introducing Cisco DNA Center Assurance Monitoring Health and Performance with Cisco DNA Center Assurance Troubleshooting Issues, Observing Insights and Trends Troubleshooting Wireless Issues with Cisco DNA Center Assurance Tools Additional course details: Nexus Humans Cisco Leveraging Cisco Intent-Based Networking DNA Assurance (DNAAS) v2.1 training program is a workshop that presents an invigorating mix of sessions, lessons, and masterclasses meticulously crafted to propel your learning expedition forward. This immersive bootcamp-style experience boasts interactive lectures, hands-on labs, and collaborative hackathons, all strategically designed to fortify fundamental concepts. Guided by seasoned coaches, each session offers priceless insights and practical skills crucial for honing your expertise. Whether you're stepping into the realm of professional skills or a seasoned professional, this comprehensive course ensures you're equipped with the knowledge and prowess necessary for success. While we feel this is the best course for the Cisco Leveraging Cisco Intent-Based Networking DNA Assurance (DNAAS) v2.1 course and one of our Top 10 we encourage you to read the course outline to make sure it is the right content for you. Additionally, private sessions, closed classes or dedicated events are available both live online and at our training centres in Dublin and London, as well as at your offices anywhere in the UK, Ireland or across EMEA.

Duration 2 Days 12 CPD hours This course is intended for System installers System integrators System administrators Network administrators Overview After taking this course, you should be able to: Describe the Cisco SD-Branch solution and its architecture Explain the hardware components of the Cisco ENCS 5400 and Cisco Catalyst 8200 Series Edge Universal Customer Premises Equipment (uCPE) Install and access the Cisco Enterprise NFVIS on Cisco ENCS 5400 Understand the VNF Lifecycle management and its deployment Identify Cisco Enterprise NFVIS Security considerations Explain the Cisco SD-WAN solution and its components Describe the Cisco ENCS orchestrations systems and Representational State Transfer (REST) APIs Deploy the Cisco ENCS using orchestrators Monitor and troubleshoot Cisco ENFV components using Cisco vManage The Implementing Cisco Enterprise SD-Branch (ENSDBI) v1.0 course is designed to teach you to understand the Cisco© Software-Defined (SD)-Branch architecture and Cisco Enterprise Network Functions Virtualization (ENFV) solution. Through a series of in-person or e-learning lectures and labs, you will learn about the supported hardware platforms with a focus on the components, installation, and upgraded workflows of the Cisco Enterprise Network Compute System (ENCS) 5400 series. Additionally, this course will help you build your skills on Virtual Network Functions (VNF) deployment and orchestration solutions on Cisco ENCS. Course Outline Introducing Cisco SD-Branch Architecture and Cisco ENFV Solution Preparing Cisco ENCS Device for Deployment Deploying VNFs on Cisco ENCS Working with Cisco ENCS Orchestration Monitoring and Managing Cisco ENFV Components Additional course details: Nexus Humans Cisco Implementing Cisco Enterprise SD-Branch v1.0 (ENSDBI) training program is a workshop that presents an invigorating mix of sessions, lessons, and masterclasses meticulously crafted to propel your learning expedition forward. This immersive bootcamp-style experience boasts interactive lectures, hands-on labs, and collaborative hackathons, all strategically designed to fortify fundamental concepts. Guided by seasoned coaches, each session offers priceless insights and practical skills crucial for honing your expertise. Whether you're stepping into the realm of professional skills or a seasoned professional, this comprehensive course ensures you're equipped with the knowledge and prowess necessary for success. While we feel this is the best course for the Cisco Implementing Cisco Enterprise SD-Branch v1.0 (ENSDBI) course and one of our Top 10 we encourage you to read the course outline to make sure it is the right content for you. Additionally, private sessions, closed classes or dedicated events are available both live online and at our training centres in Dublin and London, as well as at your offices anywhere in the UK, Ireland or across EMEA.

Duration 5 Days 30 CPD hours This course is intended for Enterprise network engineers System engineers System administrators Network administrators Overview After taking this course, you should be able to: Configure classic Enhanced Interior Gateway Routing Protocol (EIGRP) and named EIGRP for IPv4 and IPv6 Optimize classic EIGRP and named EIGRP for IPv4 and IPv6 Troubleshoot classic EIGRP and named EIGRP for IPv4 and IPv6 Configure Open Shortest Path First (OSPF)v2 and OSPFv3 in IPv4 and IPv6 environments Optimize OSPFv2 and OSPFv3 behavior Troubleshoot OSPFv2 for IPv4 and OSPFv3 for IPv4 and IPv6 Implement route redistribution using filtering mechanisms Troubleshoot redistribution Implement path control using Policy-Based Routing (PBR) and IP service level agreement (SLA) Configure Multiprotocol-Border Gateway Protocol (MP-BGP) in IPv4 and IPv6 environments Optimize MP-BGP in IPv4 and IPv6 environments Troubleshoot MP-BGP for IPv4 and IPv6 Describe the features of Multiprotocol Label Switching (MPLS) Describe the major architectural components of an MPLS VPN Identify the routing and packet forwarding functionalities for MPLS VPNs Explain how packets are forwarded in an MPLS VPN environment Implement Cisco Internetwork Operating System (IOS) Dynamic Multipoint VPNs (DMVPNs) Implement Dynamic Host Configuration Protocol (DHCP) Describe the tools available to secure the IPV6 first hop Troubleshoot Cisco router security features Troubleshoot infrastructure security and services The Implementing Cisco Enterprise Advanced Routing and Services (ENARSI) v1.0 gives you the knowledge you need to install, configure, operate, and troubleshoot an enterprise network. This course covers advanced routing and infrastructure technologies, expanding on the topics covered in the Implementing and Operating Cisco Enterprise Network Core Technologies (ENCOR) v1.0 course. This course may earn a Credly Badge Course Outline Implementing EIGRP Optimizing EIGRP Troubleshooting EIGRP Implementing OSPF Optimizing OSPF Troubleshooting OSPF Implementing Internal Border Gateway Protocol (IBGP) Optimizing BGP Implementing MP-BGP Troubleshooting BGP Configuring Redistribution Troubleshooting Redistribution Implementing Path Control Exploring MPLS Introducing MPLS L3 VPN Architecture Introducing MPLS L3 VPN Routing Configuring Virtual Routing and Forwarding (VRF)-Lite Implementing DMVPN Implementing DHCP Troubleshooting DHCP Introducing IPv6 First Hop Security Securing Cisco Routers Troubleshooting Infrastructure Security and Services Lab Outline Configure EIGRP Using Classic Mode and Named Mode for IPv4 and IPv6 Verify the EIGRP Topology Table Configure EIGRP Stub Routing, Summarization, and Default Routing Configure EIGRP Load Balancing and Authentication LAB: Troubleshoot EIGRP Issues Configure OSPFv3 for IPv4 and IPv6 Verify the Link-State Database Configure OSPF Stub Areas and Summarization Configure OSPF Authentication Troubleshoot OSPF Implement Routing Protocol Redistribution Manipulate Redistribution Manipulate Redistribution Using Route Maps Troubleshoot Redistribution Issues Implement PBR Configure IBGP and External Border Gateway Protocol (EBGP) Implement BGP Path Selection Configure BGP Advanced Features Configure BGP Route Reflectors Configure MP-BGP for IPv4 and IPv6 Troubleshoot BGP Issues Implement PBR Configure Routing with VRF-Lite Implement Cisco IOS DMVPN Obtain IPv6 Addresses Dynamically Troubleshoot DHCPv4 and DHCPv6 Issues Troubleshoot IPv4 and IPv6 Access Control List (ACL) Issues Configure and Verify Control Plane Policing Configure and Verify Unicast Reverse Path Forwarding (uRPF) Troubleshoot Network Management Protocol Issues: Lab 1 Troubleshoot Network Management Protocol Issues: Lab 2

Duration 4 Days 24 CPD hours This course is intended for The primary audience for this course is as follows: Data Center engineers Cloud engineers System engineers Field engineers Implementation/operation/support/installation and upgrade specialists IT administrators Network engineers Cloud computing experts Security specialists Cisco integrators and partners Overview Upon completing this course, the learner will be able to meet these overall objectives: Describe items to be aware of before installing a Cisco CSR 1000V, including virtual machine requirements for installing Cisco CSR 1000V, licensing options that are available with Cisco CSR 1000V, supported Cisco IOS XE technologies, and management options for Cisco CSR 1000V. Prepare for installation of Cisco CSR 1000V Series routers. Explain common Cisco IOS XE Command-Line Interface (CLI) commands and conventions that can make it easier to work in the CLI, and describe how you can get help with command syntax and command options. Describe the options you can use to activate the license for Cisco CSR 1000V and activate the license for each option. Troubleshoot issues with Cisco CSR 1000V licenses. Upgrade the Cisco IOS XE software for an existing Cisco CSR 1000V installation. Describe the Call Home feature and its benefits, configure the feature on the Cisco CSR 1000V, including the anonymous reporting option, and display the Call Home configuration. List the different Call Home events that trigger alerts and commands that are executed as a result of the alert. Troubleshoot Cisco CSR 1000V Virtual Machine (VM) issues. Rehost a Cisco CSR 1000V license to a new VM, whether the current Cisco CSR 1000V router is accessible or not. Describe the Virtual Extensible LAN (VXLAN) Layer 2 gateway feature and configure this feature on the Cisco CSR 1000V router. Deploy the Cisco CSR 1000V in a virtual private cloud using Microsoft Azure or Amazon Web Services (AWS). Describe common network operations that the Cisco CSR 1000V supports. Explore programmability support on Cisco CSR 1000V, including APIs, shells, and data models. The Deploying Cloud Connect Solutions with Cisco Cloud Services Router 1000V (CLDCSR) course shows you how to deploy and operate Cisco© Cloud Services Router 1000V (CSR1000V) to provide comprehensive WAN gateway and network services functions including connectivity, routing, and security into virtual and cloud environments. Through expert instruction and hands-on labs, you will learn: Cisco CSR 1000V deployment options and requirements; hypervisor support, licensing models, features and programmability support; and how to implement, integrate, install, manage, and troubleshoot the deployment process and common operation issues.This class will help you:Learn how to use the CSR 1000V Series to extend your enterprise network to public and private cloudsGain hands-on practice acquiring skills in virtual and cloud-based technologies Course Outline Introducing Cisco CSR Product Overview Preparing for Installation Installing Cisco CSR 1000V in VMware Elastic Sky X (ESXi) Environments Booting Cisco CSR 1000V and Accessing the Console Using Cisco IOS XE Software Managing Cisco CSR 1000V Licenses Upgrading the Cisco IOS XE Software Mapping Cisco CSR 1000V Network Interfaces to Virtual Machine Network Interfaces Using GRUB Mode (Bootstrap Program) Configuring Call Home for Cisco CSR 1000V Configuring Virtual CPU (vCPU) Distribution Across Data, Control, and Service Planes Troubleshooting Cisco CSR 1000V Virtual Machine Issues Rehosting a Smart License Supporting the Cisco CSR 1000V Virtual Extensible LAN (VXLAN) Feature Deploying Cisco CSR 1000V in a Virtual Private Cloud Exploring Cisco CSR 1000V Operations Exploring Programmability on Cisco CSR 1000V

Duration 5 Days 30 CPD hours This course is intended for The primary audience for this course is as follows: • This course is intended primarily for network administrators, network engineers, network managers and systems engineers who would like to implement BGP. The secondary audience for this course is as follows: • This course is intended for network designers and project managers. The course is also recommended to all individuals preparing for BGP exam. Overview After completing this course the student should be able to: - Describe how to configure, monitor, and troubleshoot basic BGP to enable interdomain routing in a network scenario with multiple domains - Describe how to use BGP policy controls to influence the BGP route selection process in a network scenario In which you must support connections to multiple ISPs - Describe how to use BGP attributes to influence the route selection process in a network scenario where you must support multiple connections - Describe how to successfully connect the customer network to the Internet in a network scenario in which multiple connections must be implemented - Describe how to configure the service provider network to behave as a transit AS in a typical implementation with multiple BGP connections to other autonomous systems - Enable route reflection as possible solution to BGP scaling issues in a typical service provider network with multiple BGP connections to other autonomous systems - Describe the available BGP tools and features to optimize the scalability of the BGP routing protocol in a typical BGP network This covers the theory of BGP, configuration of BGP on Cisco IOS© routers, detailed troubleshooting information, and hands-on exercises that provide learners with the skills that they need to configure and troubleshoot BGP networks in customer environments. BGP Overview Introducing BGP Understanding BGP Path Attributes Establishing BGP Sessions Processing BGP Routes Configuring Basic BGP Monitoring and Troubleshooting BGP Lab 1-1: Initial Lab Setup Lab 1-2: Configuring Basic BGP BGP Transit Autonomous Systems Working with a Transit AS Interacting with IBGP and EBGP in a Transit AS Forwarding Packets in a Transit AS Configuring a Transit AS Monitoring and Troubleshooting IBGP in a Transit AS Lab 2-1: Configuring a Transit AS Route Selection Using Policy Controls Using Multihomed BGP Networks Employing AS-Path Filters Filtering with Prefix-Lists Using Outbound Route Filtering Applying Route-Maps as BGP Filters Implementing Changes in BGP Policy Lab 3-1: Using Multihomed BGP Networks Lab 3-2: Employing AS-Path Filters Lab 3-3: Filtering with Prefix-Lists Lab 3-4: Implementing Changes in BGP Policy Route Selection Using Attributes Influencing BGP Route Selection with Weights Setting BGP Local Preference Using AS-Path Prepending Understanding BGP Multi-Exit Discriminators Addressing BGP Communities Lab 4-1: Influencing BGP Route Selection with Weights Lab 4-2: Setting BGP Local Preference Lab 4-3: Understanding BGP Multi-Exit Discriminators Lab 4-4: Addressing BGP Communities Customer-to-Provider Connectivity with BGP Understanding Customer-to-Provider Connectivity Requirements Implementing Customer Connectivity Using Static Routing Connecting a Multihomed Customer to a Single Service Provider Connecting a Multihomed Customer to Multiple Service Providers Scaling Service Provider Networks Scaling IGP and BGP in Service Provider Networks Introducing Route Reflectors Designing Networks with Route Reflectors Configuring and Monitoring Route Reflectors Introducing Confederations Configuring and Monitoring Confederations Lab 6-1: Introducing Route Reflectors Lab 6-2: Configuring and Monitoring Confederations Optimizing BGP Scalability Improving BGP Convergence Limiting the Number of Prefixes Received from a BGP Neighbor Implementing BGP Peer Groups Using BGP Route Dampening Lab 7-1: Limiting the Number of Prefixes Received from a BGP Neighbor Lab 7-2: Implementing BGP Peer Groups Lab 7-3: Using BGP Route Dampening Additional course details: Nexus Humans Cisco Configuring BGP on Cisco Routers v4.0 (BGP) training program is a workshop that presents an invigorating mix of sessions, lessons, and masterclasses meticulously crafted to propel your learning expedition forward. This immersive bootcamp-style experience boasts interactive lectures, hands-on labs, and collaborative hackathons, all strategically designed to fortify fundamental concepts. Guided by seasoned coaches, each session offers priceless insights and practical skills crucial for honing your expertise. Whether you're stepping into the realm of professional skills or a seasoned professional, this comprehensive course ensures you're equipped with the knowledge and prowess necessary for success. While we feel this is the best course for the Cisco Configuring BGP on Cisco Routers v4.0 (BGP) course and one of our Top 10 we encourage you to read the course outline to make sure it is the right content for you. Additionally, private sessions, closed classes or dedicated events are available both live online and at our training centres in Dublin and London, as well as at your offices anywhere in the UK, Ireland or across EMEA.

Duration 4 Days 24 CPD hours This course is intended for The primary audience for this course is as follows: System Installers System Integrators System Administrators Network Administrators Solutions Designers Overview Upon completing this course, the learner will be able to meet these overall objectives: Describe the Cisco IOS XR 64-Bit software architecture and Linux system fundamentals Describe the major differences between classic Cisco IOS XR software and Cisco IOS XR 64-Bit software on the ASR 9000 Series routers Migrate an ASR 9000 Series router from classic IOS XR software to Cisco IOS XR 64-Bit software Perform and explain Cisco IOS XR 64-Bit software installations Configure and describe Cisco IOS XR 64-Bit software features The Cisco ASR 9000 Series IOS XR 64-Bit Software Migration and Operational Enhancements (IOSXR211) course covers the migration from classic 32-bit Cisco IOS© XR software to Cisco IOS XR 64-Bit software on the Cisco© ASR 9000 Series Aggregation Services Routers. This course will also examine the software architecture, boot process, and auto-provisioning of the Cisco IOS XR 64-bit software, as well as showing you how to install Cisco IOS XR and third-party software packages. In addition, it will investigate data models and show you how to implement telemetry, model-driven programmability, and application hosting services. Software Architecture and Linux Fundamentals Cisco IOS XR 64-Bit Software Fundamentals Cisco ASR 9000 Series IOS XR 64-Bit Software vs. Classic 32-Bit Software Exploring Linux Fundamentals Creating User Profiles Cisco IOS XR 64-Bit Software Installation Examining Resource Allocations and Media Mappings Migrating to Cisco IOS XR 64-Bit Software Examining the Boot Process Performing Disaster Recovery Installing Software Packages Cisco IOS XR 64-Bit Software Features Investigating Data Models Implementing Telemetry Exploring Model-Driven Programmability Employing Application Hosting Additional course details: Nexus Humans Cisco ASR9000 Series 64-bit Software Migration (IOSXR211) training program is a workshop that presents an invigorating mix of sessions, lessons, and masterclasses meticulously crafted to propel your learning expedition forward. This immersive bootcamp-style experience boasts interactive lectures, hands-on labs, and collaborative hackathons, all strategically designed to fortify fundamental concepts. Guided by seasoned coaches, each session offers priceless insights and practical skills crucial for honing your expertise. Whether you're stepping into the realm of professional skills or a seasoned professional, this comprehensive course ensures you're equipped with the knowledge and prowess necessary for success. While we feel this is the best course for the Cisco ASR9000 Series 64-bit Software Migration (IOSXR211) course and one of our Top 10 we encourage you to read the course outline to make sure it is the right content for you. Additionally, private sessions, closed classes or dedicated events are available both live online and at our training centres in Dublin and London, as well as at your offices anywhere in the UK, Ireland or across EMEA.

Duration 5 Days 30 CPD hours This course is intended for This course is designed for technology leaders, solution developers, project managers, organizational decision makers, and other individuals seeking to demonstrate a vendor-neutral, cross-industry understanding of ethics in emerging data-driven technologies, such as AI, robotics, IoT, and data science. This course is also designed for professionals who want to pursue the CertNexus Certification Exam CET-110: Certified Ethical Emerging Technologies. Overview In this course, you will incorporate ethics into data-driven technologies such as AI, IoT, and data science. You will: Describe general concepts, theories, and challenges related to ethics and emerging technologies. Identify ethical risks. Practice ethical reasoning. Identify and mitigate safety and security risks. Identify and mitigate privacy risks. Identify and mitigate fairness and bias risks. Identify and mitigate transparency and explainability risks. Identify and mitigate accountability risks. Build an ethical organization. Develop ethical systems in technology-focused organizations. Mutually reinforcing innovations in computing and engineering are catapulting advances in technological production. From blockchain and artificial intelligence (AI) to gene editing and the Internet of Things (IoT), these advances come with tremendous opportunities for improvement in productivity, efficiency, and human well-being. But as scandals increasingly demonstrate, these advances also introduce new and serious risks of conflict and harm.Technology professionals now face growing demands to identify and mitigate ethical risks to human rights and the environment, as well as to navigate ethical tradeoffs between qualities such as privacy and accuracy, fairness and utility, and safety and accountability. This course provides the tools to identify and manage common ethical risks in the development of emerging data-driven technologies. It distills ethical theory, public regulations, and industry best practices into concrete skills and guidelines needed for the responsible development of digital products and services. By following the course's practical, problems-based approach, learners will become adept at applying theories, principles, frameworks, and techniques in their own roles and organizations. Introduction to Ethics of Emerging Technologies Topic A: What?s at Stake Topic B: Ethics and Why It Matters Topic C: Ethical Decision-Making in Practice Topic D: Causes of Ethical Failures Identifying Ethical Risks Topic A: Ethical Reasons Topic B: Stumbling Blocks for Ethical Reasoning Topic C: Identify Ethical Risks in Product Development Topic D: Tools for Identifying Ethical Risks Topic E: Use Regulations, Standards, and Human Rights to Identify Ethical Risks Ethical Reasoning in Practice Topic A: Ethical Theories Topic B: Use Ethical Decision-Making Frameworks Topic C: Select Options for Action Topic D: Avoid Problems in Ethical Decision-Making Identifying and Mitigating Security Risks Topic A: What Is Security? Topic B: Identify Security Risks Topic C: Security Tradeoffs Topic D: Mitigate Security Risks Identifying and Mitigating Privacy Risks Topic A: What Is Privacy? Topic B: Identify Privacy Risks Topic C: Privacy Tradeoffs Topic D: Mitigate Privacy Risks Identifying and Mitigating Fairness and Bias Risks Topic A: What Are Fairness and Bias? Topic B: Identify Bias Risks Topic C: Fairness Tradeoffs Topic D: Mitigate Bias Risks Identifying and Mitigating Transparency and Explainability Risks Topic A: What Are Transparency and Explainability? Topic B: Identify Transparency and Explainability Risks Topic C: Transparency and Explainability Tradeoffs Topic D: Mitigate Transparency and Explainability Risks Identifying and Mitigating Accountability Risks Topic A: What Is Accountability? Topic B: Identify Accountability Risks Topic C: Accountability Tradeoffs Topic D: Mitigate Accountability Risks Building an Ethical Organization Topic A: What Are Ethical Organizations? Topic B: Organizational Purpose Topic C: Ethics Awareness Topic D: Develop Professional Ethics within Organizations Developing Ethical Systems in Technology-Focused Organizations Topic A: Policy and Compliance Topic B: Metrics and Monitoring Topic C: Communication and Stakeholder Engagement Topic D: Ethical Leadership