Name: PLC Advanced
Price: 500 GBP
Availability: InStock

Clay Cross

Refrigeration, Air Conditioning &amp; Heat Pump Systems Assessment

Technique Learning Solutions

RACHP Assessment

General Admission

Domestic Natural Gas Safety Assessments - Renewals Package

Domestic Natural Gas Safety Assessments - Renewals

Bespoke CG 2382-22 3 Day On-Site

Category 4 F-Gas 1 Day - Myddleton Maintenance Services

Gas ACS Training - HTR1 (Space heaters, including gas fires and wall heaters)

Gas ACS Training - HTR1

Gas ACS Training - CCN1

Remote Exam 2391-52 - Tesfay Awoke

EAL EVC 2 Day DPL Group Ltd

The following areas are designed to allow personnel to quickly determine the locations of faults on a PLC controlled plant, to develop their own programmes, and to monitor and fault find plant operation on both stand alone and networked systems. The Programmable Logic Controllers Advanced course is designed for candidates who have specific objectives in mind. Local Area Networks Remote I/O Racks Interconnection with Scada Advanced Programming Instructions Communications Protocols Remote Monitoring &amp; Control via modem etc Shift Register &amp; Sequencer Register Read Write Commands Analogue I/O Error Codes, diagnosis Device Time Scans Network Interface Modules Alarm &amp; Error Messages &amp; Checking Interrupt &amp; Fault Handling Routines Message &amp; PID Control &amp; Handling.

PLC Advanced

This driver CPC course - Customer Service &amp; Manual Handling is suitable for LGV &amp; PCV and will cover:Company &amp; Driver Image,&nbsp;Who Customers Are and What They Want,&nbsp;Communication Skills,&nbsp;Giving Good Customer Service,&nbsp;About Manual Handling,&nbsp;The Spine,&nbsp;Manual Handling Injuries and Their Costs,&nbsp;Regulations,&nbsp;Manual Handling Risk Assessment,&nbsp;Safe Handling Techniques,&nbsp;Manual Handling Equipment.All courses start at 07:45 hrs and finish at 15:45 hrsAll courses are 8 hours long with included 2 breaks of 15 minutes and a lunch break of 30 minutes.Approval: This course is registered with JAUPT as approved for Driver CPC qualification.Course Approval Number: CRS18242/475.On completion of the course all attendees will receive certificate of attendance.Please note repeat courses are not accepted by DVSA and by joining this course you confirm that you are aware of the modules covered by you and certify that, if you have covered these before you are happy to repeat the modules due to needing further education on the subject.

This is an International Driver CPC - 7hours course - Rules of the Road & Customer Service and it is suitable for LGV & PCV and will cover:
Requirements, Speed Limits, SMART Motorways, Highway Code, Road Signs, Bridge Strikes, Mobile Phones, Sat-Navs, Traffic Accident Procedures, Company & Driver Image, Who Customers Are and What They Want, Communication Skills, Giving Good Customer Service.
All courses start at 07:45 hrs and finish at 15:45 hrs
All courses are 8 hours long with included 2 breaks of 15 minutes and a lunch break of 30 minutes.
Approval: This course is registered with JAUPT as approved for Driver CPC qualification.
Course Approval Number: ICRS24736/475.
On completion of the course, all attendees will receive a certificate of attendance.
Please note repeat courses are not accepted by DVSA and by joining this course you confirm that you are aware of the modules covered by you and certify that, if you have covered these before you are happy to repeat the modules due to needing further education on the subject.

PETM

HGV Driver

7.5 Ton Driver

Driver CPC

Rules of the Road & Customer Service - International CPC - Online

What is the AM2 assessment? The AM2 assessment is an industry recognised trade test designed to evidence that candidates have gained all relevant and safety-critical competencies during their training process. It provides a single standard that has been agreed upon by employers within the electrical industry, giving a reliable and trusted guarantee of safe, high-quality skills for the electrotechnical industry. Who is this for? This is aimed at apprentices who are coming to the end of their training for the JIB apprentice training scheme and the Installation of modern apprenticeships. This course is also for experienced electricians, specifically those who are looking at taking the experienced worker route (AM2E.) There are a range of assessments for candidates based on their level: AM2 – This is for candidates undertaking the JIB mature candidate assessments and those following the level three NVQ who isn’t an apprentice. AM2S – This is for electrotechnical apprentices who are training against the apprenticeship standard AM2E – This is for experienced workers who are completing the experienced worker assessment. Please note: this can only be taken once you have gained the experienced worker qualification, proof must be provided before booking the AM2 assessment. What does this assessment consist of? Overall, the AM2 is an in-depth assessment carrying out tasks to show what you have learnt on your training. It is a practical assessment with five sections (six for AM2E and AM2S) and a short online component. Candidates will be expected to install, connect, terminate, inspect, test, commission and diagnose faults, following installation specifications provided and any relevant statutory and non-statutory regulations on: A three-phase distribution board and subcircuit A central heating/sustainable energy system Lighting and power circuits A data cabling system A safety services circuit and device Installation of containment systems (AM2E and AM2S only) Candidates will complete timed tasks in equipped areas that contain typical electrical installation wiring systems – all work must comply with BS7671 Wiring Regulations, industry best practice, and meet the requirements of relevant health and safety legislation. The assessment will be carried out in strict exam conditions across 2.5 days. Do I need an AM2 certificate to work as an electrician? Apprentices must pass their AM2 test in their final year to complete their apprenticeship. Also, if the apprenticeship standard is not being followed, an AM2 certificate and a level three NVQ is required to gain a gold card. If you are already working as an electrician, you will not need an AM2 certificate. If you are training to be an electrician and are registering for your NVQ level three in Electrical Installation or Maintenance, the electrotechnical diploma now includes the AM2. The AM2 certification is an industry recognised and something that many employers will actively seek when hiring new staff. It can also be attractive to potential customers.

AM2/AM2E/AM2S Assessment

Chelmsford

Stratford

This five-day course is a must for anyone who is considering or already working in a role with site manager responsibilities. This course covers all relevant legislation affecting safe working in the building, construction, and civil engineering industries.
It is endorsed by Build UK as the standard training for all construction managers.
Aims
To give a clear understanding of health, safety, welfare, and environmental legislation that affects your management role. It highlights the need for risk assessment in the workplace, the implementation of the necessary control measures and adequate communication to sustain a health and safety culture within the workforce.
Course Content
To give a clear understanding of health, safety, welfare, and environmental legislation that affects your management role. It highlights the need for risk assessment in the workplace, the implementation of the necessary control measures and adequate communication to sustain a health and safety culture within the workforce.
Course Content
• Health, safety, welfare and environmental legislation affecting your daily work
• New guidance and industry best practice
• Duties and responsibilities with regards to health, safety, welfare, and the environment
• Safe working
Prerequisites
This course is for you if you’re considering, or already have management responsibilities for planning, organising, monitoring, controlling and administering groups of staff e.g. site manager.
Assessment
At the end of this course, all delegates will have a clear understanding of controlling health and safety on site from a manager’s role.
Certificate
The certification for this course is valid for 5 years and is endorsed by Build UK as a standard training for all site managers.
To remain certified in this area, you will need to take a refresher course before the expiry date on your certificate, otherwise the full course will need to be retaken.
Instructions
Please note all online Site Management Safety Training Scheme courses with the venue “Online” will be delivered by a tutor over a video call.
This training will be delivered and assessed in English language; therefore, a good standard is required to complete the course.
Further attendee information will be sent in a separate email, please check your inbox.

SMC Safety Solutions

Site Management Safety Training Scheme (SMSTS) 5 day course

Our Site Management Safety Training Scheme (SMSTS) refresher training courses, available both online and in-person, are designed for managers and individuals in positions of authority who completed their original SMSTS training program less than three years ago.

Aims
Participants will undertake a concise yet equally engaging training program covering all essential aspects of enforcing health and safety codes of practice at construction sites. Topics include in-depth discussions on risk assessments and effective methods for monitoring and managing industry-specific hazards.
Instructions
For online courses labeled “Remote Learning,” a tutor will deliver the training via video call.
All SMSTS courses are delivered and assessed in English. Participants must have a good command of the language to successfully complete the program.
Additional attendee information will be provided via email. Please ensure you check your inbox.


Site Management Safety Training Scheme (SMSTS) Refresher

This two-day course is a must for anyone who is considering or already working in a role with supervisory responsibilities. This course provides an understanding of health, safety, welfare, and environmental issues. It highlights legal responsibilities and the need to promote health and safety to supervise effectively.
It is endorsed by Build UK as the standard training for all supervisors working on Build UK sites.
Aims
To give a clear understanding of health, safety, welfare, and environmental legislation that affects your supervisory role. To help you fulfil your responsibilities regarding health, safety, welfare, and the environment. To help you implement new guidance and industry best practice affected by changes.
Course Content
• Health and safety law and how it will apply to supervisors.
• Your supervisory responsibilities in controlling site safety.
• Risk assessments and the need for method statements.
• Effective site inductions, toolbox talks and method statement briefings.
• Monitoring site activities effectively.
• Timely intervention when bad practice is identified.
Prerequisites
This course is for you if you are considering, or already have, supervisory responsibilities.
Assessment
At the end of this course, all delegates will have a clear understanding of controlling health and safety on site from a supervisor’s role.
Certificate
This certification for this course is valid for 5 years and is endorsed by Build UK as a standard training for all supervisors.
To remain certified in this area, you will need to take a refresher course before the expiry date on your certificate, otherwise the full course will need to be retaken.
Instructions
Please note all Site Supervisor Training courses with the venue “Remote Learning” will be delivered by a tutor over a video call.
This training will be delivered and assessed in English language; therefore, a good standard is required to complete the course.
Further attendee information will be sent in a separate email, please check your inbox

Site Supervisor Training Scheme (SSSTS) - 2 Day Course

IT Cyber Security Engineer – Job Ready Programme
Enrol in Our IT Cyber Security Engineer – Job Ready Programme with Career Support!
Gain access to 3,000+ online courses and earn Free Certificates to showcase your skills and boost your career potential.
Step into the high-demand world of cyber security with a comprehensive programme designed for the UK job market. Master critical areas like penetration testing, secure cloud architecture, AI-powered threat detection, and GDPR compliance—skills that can lead to roles earning up to £95,000 a year.
As UK businesses face £27 billion in cybercrime losses annually, the demand for skilled IT Cyber Security Engineers has never been greater. Whether you're changing careers or upskilling, this course equips you with in-demand expertise in threat intelligence, cryptography, and secure coding.
Become the digital defence every company needs. Start your journey toward a resilient and rewarding career in cyber security today.

Professional Diploma in IT Cyber Security Engineer – 25 Core Courses
– Course 01: Cyber Security Online Course: DOSS and DDOS
– Course 02: Cyber Security Training: Incident Handling & Response
– Course 03: Security Threat Management
– Course 04: Certified Information Security Manager (CISM)
– Course 05: Certified Information Systems Security Professional (CISSP)
– Course 06: CompTIA Advanced Security Practitioner (CASP)
– Course 07: Computer Network Security Complete Training
– Course 08: CyberSec First Responder: Threat Detection and Response [QLS Level 7]
– Course 09: Bash Scripting and Shell Programming for Beginners
– Course 10: Ethical Hacking Masterclass
– Course 11: CompTIA PenTest+ Ethical Hacking Course
– Course 12: BlackArch Linux: Ethical Hacking and Penetration Testing
– Course 13: Ultimate Linux Security and Hardening Training
– Course 14: The Complete Python Hacking Course: Beginner to Advanced!
– Course 15: SQL Database Basics
– Course 16: CompTIA Network+ Certification (N10-008)
– Course 17: CompTIA A+ Core 1 (220-1101) Course
– Course 18: CompTIA A+ Core 2 (220-1102) Course
– Course 19: CompTIA Security+ (SY0-601)
– Course 20: CompTIA Cloud+ CV0-002 Course
– Course 21: Cisco CCENT/CCNA Interconnecting Cisco Networking Devices Part 1
– Course 22: Cisco CCNA Interconnecting Cisco Networking Devices Part 2 (ICND2) Training
– Course 23: Cisco ASA Firewall Training with Step-by-Step Lab Workbook
– Course 24: FortiGate Firewall Training Step-by-Step Lab Workbook
– Course 25: Palo Alto Firewall Training with Step-by-Step Lab Workbook
Job Readiness & Career Development Training (Complementary)
– Course 01: Career Development Training
– Course 02: Effective CV Writing
– Course 03: CV Writing and Interview Tricks
– Course 04: Ace the Interview – Interview Prep That Makes a Difference
– Course 05: Job Search Skills
– Course 06: Effective Communication Skills for Professionals
– Course 07: Boost Your Confidence, Assertiveness
– Course 08: Body Language Secrets
– Course 09: Coaching and Mentoring
– Course 10: Presentation Skills – Present like a Pro
– Course 11: Public Speaking Course
– Course 12: Project Management Training
– Course 13: Leadership & Management
– Course 14: Negotiation and Agreement Training
– Course 15: Workplace Equality & Diversity
– Course 16: Professional Development and Personal Well-being
– Course 17: Emotional Intelligence and Human Behaviour
– Course 18: Time Management: Step By Step Training
– Course 19: Cross-Cultural Awareness
– Course 20: Productivity Boosting
– Course 21: Critical Thinking & Problem Solving
– Course 22: Perfect LinkedIn Profile Creation
– Course 23: Resume Writing Skills & Job Search With LinkedIn
– Course 24: Email Writing
– Course 25: Learn Microsoft Word, PowerPoint & Outlook In 90 Minutes!

Skill Up

IT Cyber Security Engineer – Job Ready Programme

Programme With Certification

Programme Without Certification

Broxburn

C01M04 - FD&amp;FA Commissioning principles - BS 5839-1 Learners will develop knowledge from the FD&amp;FA foundation module and/or industry experience and apply this to the commissioning, handover, and acceptance of FD&amp;FA systems. The course explores the process of commissioning, the requirements of testing and inspecting a newly installed system and how the commissioner may deal with issues not known to the designer and/or non-conformities with the standard.This is module 4 of 5 which can lead to an RQF L3 Award in the Requirements of FD&amp;FA Systems for non-domestic buildings BS 5839-1: 2017.Who should attend?Anyone involved in the delivery or checking of FD&amp;FA systems and those who have a responsibility for the commissioning of FD&amp;FA systems e.g., architects, service managers, building/property managers, consultants, fire risk assessors, electrical contractors, fire alarm contractors, interested parties (F&amp;RS, building control, insurers). The course provides a continuation for commissioners who have completed modules 1, 2 and 3 or have industry experience.


Content<ul id="isPasted" style="color: rgb(63, 77, 90); box-sizing: border-box;" fr-original-style=" color: rgb(63, 77, 90);"><li id="isPasted" style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">BS 5839-1: 2017</li><ol style="list-style-type: circle; box-sizing: border-box;" fr-original-style="list-style-type: circle;"><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Section 2 &ndash; Design</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Section 3 &ndash; Installation</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Section 4 &ndash; Commissioning</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Annexes D, F &amp; G</li></ol><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Standby battery calculations&nbsp;</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Interface testing&nbsp;</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Commissioning review (non-conformities)&nbsp;</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Assessment&nbsp;</li></ul><div fr-original-style="" style="box-sizing: border-box;"><img src="https://images.cademy.co.uk/88d338d8-7dc4-4054-bf9e-401495774eee/5293624b-3258-4be0-b61f-1d0469f76c49/original.png" style="width: 300px; display: block; vertical-align: top; margin: 5px auto; text-align: center; cursor: auto; padding: 0px 1px; user-select: none; max-width: 100%; position: relative; box-sizing: border-box;" fr-original-style="width: 300px; display: block; vertical-align: top; margin: 5px auto; text-align: center; cursor: auto;" fr-original-class="fr-draggable"></div>

C01M04 - FD&FA Commissioning principles - BS 5839-1

Learners will develop knowledge from the FD&FA foundation module and/or industry experience and apply this to the commissioning, handover, and acceptance of FD&FA systems. The course explores the process of commissioning, the requirements of testing and inspecting a newly installed system and how the commissioner may deal with issues not known to the designer and/or non-conformities with the standard.

This is module 4 of 5 which can lead to an RQF L3 Award in the Requirements of FD&FA Systems for non-domestic buildings BS 5839-1: 2017.

Who should attend?
Anyone involved in the delivery or checking of FD&FA systems and those who have a responsibility for the commissioning of FD&FA systems e.g., architects, service managers, building/property managers, consultants, fire risk assessors, electrical contractors, fire alarm contractors, interested parties (F&RS, building control, insurers). The course provides a continuation for commissioners who have completed modules 1, 2 and 3 or have industry experience. 

Content
BS 5839-1: 2017
Section 2 – Design
Section 3 – Installation
Section 4 – Commissioning
Annexes D, F & G
Standby battery calculations
Interface testing
Commissioning review (non-conformities)
Assessment



Ember Compliance

Fire Alarm

Professional Development

Engineer

Continuous Professional Development (CPD)

Learners will develop knowledge from the FD&FA foundation module and/or industry experience and apply this to the commissioning, handover, and acceptance of FD&FA systems. 

C01M04 - FD&FA Commissioning principles - BS 5839-1 (online)

ACCREDITED WITH THE OPEN COLLEGE NETWORK (OCN)
AWARD LEVEL 3 – ADVANCED (2 CREDITS)
 
ONLINE (E-LEARNING) COURSE: Complete at home or work and in your own time.
NO ATTENDANCE REQUIRED


Completion of Introduction to Phlebotomy Course or working experience in phlebotomy is recommended but not essential
 
MINIMUM AGE: 18 (16 with parental consent)
A basic understanding of numeracy and literacy is required.
 
ACCREDITED: Advanced Phlebotomy & Cannulation - Level Three (advanced) awarding 2 credits (Open College Network Nationally Recognised and Accredited within the UK)
+ CPD ACCREDITED (14 CPD Points)
 
Complete our Advanced Phlebotomy & Cannulation on your computer or tablet (at home or work) and in your own time. The course can be completed in stages - you have 8 weeks to complete the course in full.
 
The nationally recognised and accredited certificate (awarded by the Open College Network) can be added to your existing certificate credit value (cumulative credits), and these may also count towards other similar college or university courses.
 
This course is suitable for you if:


You currently work (or have recently worked) as a phlebotomist and wish to add an expand on your knowledge of this subject with a valuable additional qualification, or,
You have completed our Introduction to Phlebotomy Course or have completed a similar course from an approved supplier and wish to update and renew your accreditation, or,
You seek CPD (continual professional development) or requested by your employer as part of your CPD or Induction Programme.
 
Topics covered include:
 
PART I - ADVANCED PHLEBOTOMY

M01: Introduction and Course Overview. Learning outcomes, Assumptions and Overview.
 
M02: Basic Phlebotomy - revision:
Recap of basic phlebotomy theory and practice - precursor to the
advanced course.
 
M03: Specialised Advanced Phlebotomy Equipment:
Equipment and practices in unusual situations.
Patients with special needs and requiring specific attention.
Equipment preparation for blood samples that are collected at 0
degrees, 37 degrees C and other non-standard conditions.
A look at advances in technology and how to use the latest devices.
 
M04: Point of Care Testing:
What is POC Testing? Advantages, Disadvantages and Clinical
Outcomes. Comparison of POC with lab testing. 10 common POC
tests. Roles for phlebotomists performing POC Tests.
 
M05 Neonates and Children:
Sample collection from newborn to pre-adult. A detailed overview of
legal principles of law including child consent and child protection for
phlebotomists. Neonatal and child blood collection equipment.
A comprehensive look at heel and finger-prick procedurs.
 
M06: Geriatric Patients:
The challenges of phlebotomy in older people. Understanding skin
changes and venepuncture implications. A profile of common geriatric
blood tests. Age related problems. Procedural precautions.
 
M07 Special Procedures
Special procedures relating to patient handling and sample handling.
Drug trials and research projects.
 
M08 Special Tests and Sample Handling
A look at sample collection at specific times of day and night,
samples that are protected from light, collected on ice and
collected at body temperature. Procedures for each group.
 
M09 Peripheral (Advanced) Phlebotomy Tasks
A detailed look at advanced roles within a clinical environment
including group leadership, data management, QA procedures
and training.
 
M10 Alternative Environments
A step-by-step look at non-clinical phlebotomy environments.
 
PART II - CANNULATION
M11 Peripheral IV Cannulation - Introduction
Definitions - understanding terminology relating to PIVC.
IV Therapy and NMC guidelines.
 
M12 Legal & Professional Responsibilities
Legal obligations and accountability. Criminal, Civil and Contractual
law in healthcare. Vicarious Liability and your duty of care.
 
M13 Anatomy & Physiology
Sites appropriate to IV cannulation. Hand vs. arm.
Advantages and disadvantages of relevant veins.
An overview of Homeostasis and Fluid Balance.
 
M14 Hygiene and Infection Prevention Control (IPC)
Reducing healthcare-associated infections. Keeping Safe.
Bloodborne pathogens and work practice controls.
Standard Precautions. Waste disposal. Needle-stick injuries
 
M15 Indications and Advantages
When to cannulate, infusion types and benefits over alternative infusion
routes. Continuous and intermittent infusion. Prophylactic use
before procedures and in unstable patients. Contraindications.
 
M16 Equipment
Cannula types, sizes and colour coding. When to use appropriate size.
Equipment overview for total procedure.
 
M17 Vein choice for cannulation
How and when to choose the right vein. Which veins to avoid.
How to manage an unsuccessful cannulation.
 
M18 Procedures
Full procedure for cannulation including correct documentation.
 
M18: Pictorial guide to cannulation
 
M18: Video - Recap on full procedure
 
M19 Contraindications
 
When inappropriate to cannulate including patients with specific
health conditions.
 
M20 Complications
A detailed look at potential complications during and after
cannulation, including phlebitis, infections, petechiae and
haematomas. Clinical signs and corrective actions.


ONLINE (eLearning - Advanced Phlebotomy & Cannulation)

Geopace Training

Allied Health Professions (AHP)

Blood Taking

Intravenous Cannulation

Aesthetics

Healthcare Workers

Venepuncture

Phlebotomist

Phlebotomy

Accredited Phlebotomy

Healthcare

Venepuncture & Cannulation

Take your phlebotomy

qualifications to the next level ...

    Nationally Recognised Qualification

    OCN Accredited - Level 3 (advanced)

    CPD Accredited

    Covers specialised and advanced phlebotomy techniques and practices

    Comprehensively covers Peripheral IV Cannulation

    Advanced qualification - additional credits

    Download a digital certificate on completion

    Basic understanding of English language required

​

LOOKING TO ADD PRACTICAL TRAINING?

 

ALSO AVAILABLE AS SEPARATE CLASSROOM OR

VIRTUAL CLASSROOM COURSES:

​

1: Advanced Phlebotomy Course - Level 4

2: Peripheral IV Cannulation Course - Level 3

​

COMPLETION OF INTRODUCTION TO PHLEBOTOMY

COURSE RECOMMENDED BUT NOT ESSENTIAL

Advanced Phlebotomy & Cannulation Course (GPT004E) - E-LEARNING

Awarding Body:&nbsp;Open College Network (OCN Credit4Learning)Award Level:&nbsp;Level Three (Advanced)Minimum Age:&nbsp;18 (16 with parental consent)Entry requirements:&nbsp;Completion of Introduction to Phlebotomy Course, Certificate in Phlebotomy or previous phlebotomy experience desirableTraining Locations:&nbsp;E-learning - complete this course in the comfort of your own home or at work<hr style="color: rgb(51, 51, 51); border-color: var(--border-muted); border-style: solid; clear: both; break-after: page; user-select: none; box-sizing: border-box;" fr-original-style=" color: rgb(51, 51, 51);">Course Overview:Complete this easy-to-follow Neonatal &amp; Paediatric Phlebotomy eLearning course on your computer, mobile phone, laptop, kindle or tablet at your own pace and in your own time.Learn essential skills and techniques used by phlebotomists to draw blood from neonates and paediatrics. Covers many of the skills developed by medical professionals working in Special Care Baby Units and Children&#39;s Wards.The course can be completed in stages - you have 8 weeks to complete the course in full. Once completed you will immediately be able to download your pass certificate. (Your new accredited certificate will be posted to you within 6-8 weeks).The nationally recognised and accredited certificate (awarded by the Open College Network) can be added to your existing certificate credit value (cumulative credits), and these may also count towards other similar college or university courses.This course complements our Introduction to Phlebotomy Course and is a natural progression route for practising and experienced phlebotomists wishing to expand on their existing phlebotomy qualifications. The course is also open to anyone completing another (approved) provider&#39;s phlebotomy training course.At the end of each e-learning section (module) you have a series of multiple choice questions to answer. You can re-sit each section a total of 3 times.<hr style="color: rgb(51, 51, 51); border-color: var(--border-muted); border-style: solid; clear: both; break-after: page; user-select: none; box-sizing: border-box;" fr-original-style=" color: rgb(51, 51, 51);">Is this course for me?This course is suitable for you if:You currently work (or have recently worked) as a phlebotomist and wish to add to your existing accreditations and increase your scope for work.You have completed the Introduction to Phlebotomy Course or have completed a similar course from an approved supplier. We do not recommend this course if you do not have a basic phlebotomy qualification.Add to your CPD (continual professional development) or if requested by your employer as part of your CPD or Induction Programme.This course is available at a concessionary rate if booked to follow the Introduction to Phlebotomy Course. Please call for "package" discount.(Completion of this course adds to your existing credit value and awards an Advanced Level Three Certificate)<hr style="color: rgb(51, 51, 51); border-color: var(--border-muted); border-style: solid; clear: both; break-after: page; user-select: none; box-sizing: border-box;" fr-original-style=" color: rgb(51, 51, 51);">What does this course cover?Topics covered include:M00: Introduction and Course Overview M01: Introduction to Neonatal and Paediatric Phlebotomy M02: Definitions M03: Why specialised training? M04: Consent Types and the Law (including Child Protection) M05: Psychology Part 1 (Human) and Part 2 (Environmental) M06: Pain Relief Options (non-pharmacological &amp; topical analgesia) M07: Hygiene and IPC (Infection Prevention &amp; Control) M08: Equipment M09: Anatomy &amp; Physiology M10: Tests and Test Groups M11: Site Selection and Procedures - Neonates M12: Site Selection and Procedures - Paediatric M13: Analytical Errors &amp; TroubleshootingDownload a certificate as soon as completed.Additional support material can be downloaded as you progress through the course. <hr style="color: rgb(51, 51, 51); border-color: var(--border-muted); border-style: solid; clear: both; break-after: page; user-select: none; box-sizing: border-box;" fr-original-style=" color: rgb(51, 51, 51);"><img src="https://s3.amazonaws.com/images.ecwid.com/images/wysiwyg/product/20661234/206740469/1591525097385817184361/Accreditation_Strip_jpg" fr-original-style="" style="cursor: pointer; padding: 0px 1px; user-select: none; max-width: 100%; position: relative; box-sizing: border-box;" fr-original-class="fr-draggable">

Awarding Body: Open College Network (OCN Credit4Learning)
Award Level: Level Three (Advanced)
Minimum Age: 18 (16 with parental consent)
Entry requirements: Completion of Introduction to Phlebotomy Course, Certificate in Phlebotomy or previous phlebotomy experience desirable
Training Locations: E-learning - complete this course in the comfort of your own home or at work



Course Overview:
Complete this easy-to-follow Neonatal & Paediatric Phlebotomy eLearning course on your computer, mobile phone, laptop, kindle or tablet at your own pace and in your own time.
Learn essential skills and techniques used by phlebotomists to draw blood from neonates and paediatrics. Covers many of the skills developed by medical professionals working in Special Care Baby Units and Children's Wards.
The course can be completed in stages - you have 8 weeks to complete the course in full. Once completed you will immediately be able to download your pass certificate. (Your new accredited certificate will be posted to you within 6-8 weeks).
The nationally recognised and accredited certificate (awarded by the Open College Network) can be added to your existing certificate credit value (cumulative credits), and these may also count towards other similar college or university courses.
This course complements our Introduction to Phlebotomy Course and is a natural progression route for practising and experienced phlebotomists wishing to expand on their existing phlebotomy qualifications. The course is also open to anyone completing another (approved) provider's phlebotomy training course.
At the end of each e-learning section (module) you have a series of multiple choice questions to answer. You can re-sit each section a total of 3 times.



Is this course for me?
This course is suitable for you if:
You currently work (or have recently worked) as a phlebotomist and wish to add to your existing accreditations and increase your scope for work.
You have completed the Introduction to Phlebotomy Course or have completed a similar course from an approved supplier. We do not recommend this course if you do not have a basic phlebotomy qualification.
Add to your CPD (continual professional development) or if requested by your employer as part of your CPD or Induction Programme.
This course is available at a concessionary rate if booked to follow the Introduction to Phlebotomy Course. Please call for "package" discount.
(Completion of this course adds to your existing credit value and awards an Advanced Level Three Certificate)



What does this course cover?
Topics covered include:
M00: Introduction and Course Overview
M01: Introduction to Neonatal and Paediatric Phlebotomy
M02: Definitions
M03: Why specialised training?
M04: Consent Types and the Law (including Child Protection)
M05: Psychology Part 1 (Human) and Part 2 (Environmental)
M06: Pain Relief Options (non-pharmacological & topical analgesia)
M07: Hygiene and IPC (Infection Prevention & Control)
M08: Equipment
M09: Anatomy & Physiology
M10: Tests and Test Groups
M11: Site Selection and Procedures - Neonates
M12: Site Selection and Procedures - Paediatric
M13: Analytical Errors & Troubleshooting
Download a certificate as soon as completed.
Additional support material can be downloaded as you progress through the course.









Allied Health

Paediatric

Neonatal

Specialised techniques and skills associated with neonatal and paediatric blood draws

    Nationally Recognised Qualification

    OCN Accredited - Level 3 (advanced)

    CPD Accredited - The CPD Certification Service

    Follow-on from Introduction to Phlebotomy Course

    Complements our Advanced Phlebotomy Course (Level 4 - FDSc level)

    Expand your horizons and add new skills

    Covers neonates, infants and child draws

    Legal framework and consenting

    Download a certificate on completion of your online course
​

FOLLOWS ON FROM INTRODUCTION TO PHLEBOTOMY COURSE BUT ALSO OPEN TO ALL APPLICANTS

Neonatal & Paediatric Phlebotomy Course (GPT103)

Awarding Body:&nbsp;Open College Network (OCN Credit4Learning)Award Level:&nbsp;Level Three (Advanced)Minimum Age:&nbsp;18Entry requirements:&nbsp;None. English Level 2 desirable.Training Locations:&nbsp;E-learning - complete this course in the comfort of your own home or at work<hr style="color: rgb(51, 51, 51); border-color: var(--border-muted); border-style: solid; clear: both; break-after: page; user-select: none; box-sizing: border-box;" fr-original-style=" color: rgb(51, 51, 51);">Course Overview:It takes a very special person to care for those at the end of their life&rsquo;s journey. Yet for the terminally ill and their families, the gifts of compassion, dedication and skill are priceless treasures. This End of Life (Palliative Care) Course covers the issues and practices involved in caring for the terminally ill and is suitable for both healthcare professionals and individuals looking at optimising their care skills and practices.This course will help you to gain a better knowledge of the procedures and best practices which underpins end of life care. It will help you to learn about the delivery of optimal end of life care and improve your communication skills to strengthen working relationships with healthcare professionals during this period. You will also feel you have a much better understanding on how to support the friends and family of the person that you are caring for.In this online course, you will learn to address the ethical issues and characteristics of hospice and palliative care. You will also understand the assessment and management of pain. And you will be able to help patients and their families cope with dying, death, and the grief that follows and, in doing so, will ensure that the process is in the very best interests of the individual concerned.If you are an individual looking after a terminally ill relative this course bridges the divide between understanding how healthcare professionals work and understanding how your relative or friend should be managed by your support team.This course can also be combined with our&nbsp;Healthcare Practice (Fundamental Care Skills) Course&nbsp;which will also prepare you with a general and very solid foundation qualification in healthcare. Both qualifications combined will give you a total of 6 credits which you can also use towards other future qualifications (at many UK Colleges and Universities).Once completed you will immediately be able to download your pass certificate. (Your new accredited certificate will be posted to you within 6-8 weeks.)The nationally recognised and accredited certificate (awarded by the Open College Network) can be added to your existing certificate credit value (cumulative credits), and these may also count towards other similar college or university courses.This course will perfectly supplement any medical or nursing course, however specific, and is open to anyone. At the end of each e-learning section you have up to 6 multiple choice questions to answer, with a passmark of 65%. You can re-sit each section 3 times.<hr style="color: rgb(51, 51, 51); border-color: var(--border-muted); border-style: solid; clear: both; break-after: page; user-select: none; box-sizing: border-box;" fr-original-style=" color: rgb(51, 51, 51);">Is this course for me?This course is suitable for you if:-- You are a healthcare professional or healthcare student and looking at focussing on this area of work -- You are a healthcare professional looking to add a specialised qualification to your C.V. -- You are an individual caring for a terminally ill relative or friend and would like to be fully aligned with current medical practices and end-of-life procedures -- You are currently working in a Hospice, Care Home, Geriatric Unit or Hospital and have been advised to complete this course. Add to your CPD (continual professional development) or if requested by your employer as part of your CPD or Induction Programme. (Completion of this course adds to your existing credit value and awards an Advanced Level Three Certificate)<hr style="color: rgb(51, 51, 51); border-color: var(--border-muted); border-style: solid; clear: both; break-after: page; user-select: none; box-sizing: border-box;" fr-original-style=" color: rgb(51, 51, 51);">What does this course cover?Topics covered include:M01: Introduction and Course Overview M02: Caring for people at the end of their life M03: Palliative Care M04: What is person-centred care? M05: Equality, Diversity and Rights M06: Planning Ahead M07: End of Life Strategies and Guidelines M08: Communication M09: Nutrition, Hydration and Mouth Care M10: Symptom Control M11: Identifying the Dying Phase of Life M12: The bereavement process M13: Working within the Multidisciplinary TeamDownload a certificate as soon as completed.This course is also supported with a video presentation and additional support material can be downloaded as you progress through the course.Download a&nbsp;<a href="https://drive.google.com/file/d/1zDO1PzSKxk08nGsgnig5NwCmki__qCBG/view?usp=sharing" style="color: rgb(30, 126, 200); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(30, 126, 200);"></a><a href="https://drive.google.com/file/d/1zDO1PzSKxk08nGsgnig5NwCmki__qCBG/view?usp=sharing" target="_blank" style="color: rgb(30, 126, 200); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(30, 126, 200);">Course Itinerary</a> <hr style="color: rgb(51, 51, 51); border-color: var(--border-muted); border-style: solid; clear: both; break-after: page; user-select: none; box-sizing: border-box;" fr-original-style=" color: rgb(51, 51, 51);"><img src="https://s3.amazonaws.com/images.ecwid.com/images/wysiwyg/product/20661234/206740469/1591525097385817184361/Accreditation_Strip_jpg" fr-original-style="" style="cursor: pointer; padding: 0px 1px; user-select: none; max-width: 100%; position: relative; box-sizing: border-box;" fr-original-class="fr-draggable">

Awarding Body: Open College Network (OCN Credit4Learning)
Award Level: Level Three (Advanced)
Minimum Age: 18
Entry requirements: None. English Level 2 desirable.
Training Locations: E-learning - complete this course in the comfort of your own home or at work



Course Overview:
It takes a very special person to care for those at the end of their life’s journey. Yet for the terminally ill and their families, the gifts of compassion, dedication and skill are priceless treasures. This End of Life (Palliative Care) Course covers the issues and practices involved in caring for the terminally ill and is suitable for both healthcare professionals and individuals looking at optimising their care skills and practices.
This course will help you to gain a better knowledge of the procedures and best practices which underpins end of life care. It will help you to learn about the delivery of optimal end of life care and improve your communication skills to strengthen working relationships with healthcare professionals during this period. You will also feel you have a much better understanding on how to support the friends and family of the person that you are caring for.
In this online course, you will learn to address the ethical issues and characteristics of hospice and palliative care. You will also understand the assessment and management of pain. And you will be able to help patients and their families cope with dying, death, and the grief that follows and, in doing so, will ensure that the process is in the very best interests of the individual concerned.
If you are an individual looking after a terminally ill relative this course bridges the divide between understanding how healthcare professionals work and understanding how your relative or friend should be managed by your support team.
This course can also be combined with our Healthcare Practice (Fundamental Care Skills) Course which will also prepare you with a general and very solid foundation qualification in healthcare. Both qualifications combined will give you a total of 6 credits which you can also use towards other future qualifications (at many UK Colleges and Universities).
Once completed you will immediately be able to download your pass certificate. (Your new accredited certificate will be posted to you within 6-8 weeks.)
The nationally recognised and accredited certificate (awarded by the Open College Network) can be added to your existing certificate credit value (cumulative credits), and these may also count towards other similar college or university courses.
This course will perfectly supplement any medical or nursing course, however specific, and is open to anyone. At the end of each e-learning section you have up to 6 multiple choice questions to answer, with a passmark of 65%. You can re-sit each section 3 times.



Is this course for me?
This course is suitable for you if:
-- You are a healthcare professional or healthcare student and looking at focussing on this area of work
-- You are a healthcare professional looking to add a specialised qualification to your C.V.
-- You are an individual caring for a terminally ill relative or friend and would like to be fully aligned with current medical practices and end-of-life procedures
-- You are currently working in a Hospice, Care Home, Geriatric Unit or Hospital and have been advised to complete this course.

Add to your CPD (continual professional development) or if requested by your employer as part of your CPD or Induction Programme.
(Completion of this course adds to your existing credit value and awards an Advanced Level Three Certificate)



What does this course cover?
Topics covered include:
M01: Introduction and Course Overview
M02: Caring for people at the end of their life
M03: Palliative Care
M04: What is person-centred care?
M05: Equality, Diversity and Rights
M06: Planning Ahead
M07: End of Life Strategies and Guidelines
M08: Communication
M09: Nutrition, Hydration and Mouth Care
M10: Symptom Control
M11: Identifying the Dying Phase of Life
M12: The bereavement process
M13: Working within the Multidisciplinary Team
Download a certificate as soon as completed.
This course is also supported with a video presentation and additional support material can be downloaded as you progress through the course.
Download a Course Itinerary






General Nursing

Care Worker

Healthcare Assistant

Care

Nursing

Medicine & Nursing

End Of Life Care

Assisting patients at the end of their life's journey ...

    Nationally Recognised Qualifications

    Accredited OCN Credit4Learning - Level 3

    Accredited CPD (The CPD Certification Service)​

    Expand your horizons to include this specialised area of caring

    Comprehensively covers end of life and terminal patient care skills

    Includes support and reference material to download and keep

    No previous experience or qualification needed

    Download a certificate on completion of your online course

11264 Courses

RACHP Assessment

By Technique Learning Solutions

Domestic Natural Gas Safety Assessments - Renewals Package

By Technique Learning Solutions

Domestic Natural Gas Safety Assessments - Renewals

By Technique Learning Solutions

Bespoke CG 2382-22 3 Day On-Site

By Technique Learning Solutions

Category 4 F-Gas 1 Day - Myddleton Maintenance Services

By Technique Learning Solutions

Gas ACS Training - HTR1

By Technique Learning Solutions

Gas ACS Training - CCN1

By Technique Learning Solutions

Remote Exam 2391-52 - Tesfay Awoke

By Technique Learning Solutions

EAL EVC 2 Day DPL Group Ltd

By Technique Learning Solutions

PLC Advanced

By Technique Learning Solutions

Search By Location