8988 Power courses

Communication Skills 1 Day Training in Swindon

Communication Skills 1 Day Training in Oxford

Overview Competitor Analysis is a key area every professional does to understand their business presence. It gives your insight into your business standings and also knowledge of your competitors and their strength and weakness. Analysing your competitors helps you understand the market and your power to deal with the competitors.  It is an essential marketing and strategic tool. It provides both an offensive and defensive strategic tool to analyse opportunities and threats.

Electronics Equipment Repair 2 (Online Virtual Classroom) is a follow on course to Electronics Equipment Repair 1. This course builds on the skills gained and enables participants to build, test and fault-find more complex Analogue Electronic circuits

Business Networking 1 Day Training in Bournemouth

A 2 day course for Powerboat Instructors (aged 17+) looking to advance their instructions level to include the Advanced and Intermediate Powerboat courses. The course builds on the command, teaching and communication skills all introduced at Powerboat Instructor level which will have been solidified by experience running courses. The course covers how to coach and train all aspects of the Advanced Powerboat course including safe command of a vessel at day and night, meteorology, Collision Regulations, Emergency situations and search patterns, and use of engines. The course is a mix of theory and practical.   Course Pre-Requisites To do this course you will need the following certificates: First Aid certificate, Powerboat Instructor (with logged teaching hours), Advanced Powerboat course completion certificate, one of the following Certifiates of Competnce with a valid commercial endorsement; Advanced Powerboat Certificate of Completence, RYA Yachtmaster™ Coastal (Power) Certificate of Competence, or RYA Yachtmaster™ Offshore (Power) Certifcate of Competence (Instructors who do not hold a valid commercial endorsement will only be able to teach Intermediate Powerboat). RYA Instructor Training At Torbay Sea School we have trained many RYA Instructors who have gone on to instruct with us, other RYA training centres or as freelance instructors. During the course of your general RYA training you will have gained all the skills necessary to sail, motor or power boat with confidence to a high standard. The following courses consolidate all those skills and give you the tools required to instruct others to gain their RYA qualifications. You will be able to utilise our Instructors experience and our boats/equipment to feel at ease with instructing others.

The Power of Constructive Feedback Few of us even know what constructive feedback is, so it's no surprise that employees say they don't get enough and managers say they don't have the time or expertise to provide it. This video explores the importance of constructive feedback and how to give and get feedback that improves performance. This and other IIL Learning in Minutes presentations qualify for PDUs. Some titles, such as Agile-related topics may qualify for other continuing education credits such as SEUs, or CEUs. Each professional development activity yields one PDU for one hour spent engaged in the activity. Some limitations apply and can be found in the Ways to Earn PDUs section that discusses PDU activities and associated policies. Fractions of PDUs may also be reported. The smallest increment of a PDU that can be reported is 0.25. This means that if you spent 15 minutes participating in a qualifying PDU activity, you may report 0.25 PDU. If you spend 30 minutes in a qualifying PDU activity, you may report 0.50 PDU.

The Power of Constructive Feedback Few of us even know what constructive feedback is, so it's no surprise that employees say they don't get enough and managers say they don't have the time or expertise to provide it. This video explores the importance of constructive feedback and how to give and get feedback that improves performance. This and other IIL Learning in Minutes presentations qualify for PDUs. Some titles, such as Agile-related topics may qualify for other continuing education credits such as SEUs, or CEUs. Each professional development activity yields one PDU for one hour spent engaged in the activity. Some limitations apply and can be found in the Ways to Earn PDUs section that discusses PDU activities and associated policies. Fractions of PDUs may also be reported. The smallest increment of a PDU that can be reported is 0.25. This means that if you spent 15 minutes participating in a qualifying PDU activity, you may report 0.25 PDU. If you spend 30 minutes in a qualifying PDU activity, you may report 0.50 PDU.

About this Training Course This course will provide detailed learning to the various aspects of the design, analysis and operation of subsea control systems for a variety of field development options to allow effective management of subsea facilities either from offshore structures or from shore bases. This will include power and telemetry focussing on electrical, hydraulic and electro-hydraulic systems, shut down systems, and application of intelligent monitoring and 'smart' fields. Training Objectives By attending this course, participants will be able to: To provide detailed knowledge and understanding of the requirements for, and design of, subsea electrical, electro-hydraulic, hydraulic and programmable control systems. Knowledge of the components and uses of a wide variety of subsea control systems the requirements for and design implications, of umbilicals and control lines (power and telemetry) Knowledge of, and ability to model, power requirements subsea and detailed understanding of the requirements and objectives of pre-commissioning, both at the factory and in situ. Knowledge of the standards involved in design of equipment, control and application of manual and automatic shut-down valves, and emergency response systems Introduction to design of redundancy and the role of spare capacity and to be able to put this knowledge to effect to contribute to detailed field design. An understanding of obsolescence management in subsea control systems Target Audience This course is intended for Offshore and Onshore Subsea Production Control Systems; Engineers, Technicians, Supervisors, Operators; Graduates; Apprentices; transfers from other industries, and existing staff with a limited exposure to Production Control and a need to understand the more technical aspects of the system. Companies not directly involved in the day-to-day support of the industry, but occasionally involved in supplying and supporting operators; manufacturers and suppliers of Oil and Gas equipment and services may also find this a useful course to understand how their equipment and technical expertise is integrated into the Offshore system. Trainer For most of his working life, your expert course leader has been in a role that has enabled him to pass on skills and knowledge to others. A full-time role in Training and Development came about in 1996 with the offer to take up a full-time teaching post at Aberdeen College. In 1998, he was recruited by Kvaerner Oilfield Products, an Oil & Gas industry company, specialising in Subsea Control Systems, to develop and implement a Training & Competence program acceptable for its staff of over 600 and their client companies - a challenge he could not resist. In 2003, he broadened his horizons and became an independent Training & Development consultant. Building a reputation for delivering training and development to the Oil & Gas industry to the highest standards, he later joined Jee Ltd, a leading subsea engineering and training company based in Aberdeen. He was tasked with a wide portfolio of training, coaching & mentoring to achieve high levels of competence for the client's staff and customers. He is also a Science and Engineering Ambassador (Scotland), promoting the need for engineers and technicians for Scotland's industries, a frequent consultant to the European Economic & Social Committee for standardising Vocational Skills training and competence throughout the EU. He holds memberships in the Society of Operations Engineers, Chartered Institute of Personnel & Development and Society of Underwater Technologies. POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information post training support and fees applicable Accreditions And Affliations

Recognised Accreditation This course is accredited by continuing professional development (CPD). CPD UK is globally recognised by employers, professional organisations, and academic institutions, thus a certificate from CPD Certification Service creates value towards your professional goal and achievement. Course Curriculum Supplementary Resources Supplementary Resources - ETAP Power System Analysis For Electrical Engineers 00:00:00 Introduction of ETAP Software Course Introduction of ETAP Course 00:07:00 Why To Use Power System Analysis Software 00:07:00 Creating a New Project in ETAP Creating a New Project in ETAP 00:06:00 ETAP Software Overview ETAP Software Overview 00:11:00 How To Create Single Line Diagram in ETAP How To Create Single Line Diagram in ETAP 00:09:00 Load Flow Analysis Load Flow Analysis Fundamentals 00:21:00 Load Flow Hand Calculations and Comparing With ETAP software 00:19:00 Load Flow Analysis Example 00:32:00 Transformer X/R Ratio Calculation 00:04:00 Generator Load Sharing Calculations 00:09:00 Equipment Sizing Cable Ampacity & Sizing Calculations 00:22:00 Transformer MVA Sizing 00:15:00 Short Circuit Analysis Short Circuit Analysis Fundamentals 00:23:00 Short Circuit Hand Calculations and Comparing With ETAP software 00:09:00 Short Circuit Analysis Example 00:35:00 Protection & Coordination Analysis (Relay Coordination Analysis) Protection & Coordination Analysis Fundamentals 00:23:00 Protection & Coordination Analysis Example 00:52:00 Arc Flash Analysis Using IEEE:1584-2002 Standard Arc Flash Analysis Fundamentals 00:24:00 Arc Flash Analysis Example 00:21:00 Motor Starting Analysis Motor Starting Analysis Fundamentals 00:11:00 Motor Starting Analysis Example-I 00:26:00 Motor Starting Analysis Example-II 00:08:00 Transient Stability Analysis Lecture 23: Transient Stability Analysis Fundamentals 00:29:00 Lecture 24 - Transient Stability Analysis - Example-I (Load Addition/Rejection) 00:19:00 Lecture 25 - Transient Stability Analysis - Example-II (Faulted Transient) 00:14:00 Lecture 26 - Transient Stability Analysis - Example-III (Load Shedding) 00:08:00 Harmonic Analysis Lecture 27 - Harmonic Analysis Fundamentals 00:24:00 Lecture 28 - Harmonic Analysis Example 00:34:00 Ground Grid Analysis Lecture 29 - Ground Grid Analysis 00:16:00 Obtain Your Certificate Order Your Certificate of Achievement 00:00:00 Get Your Insurance Now Get Your Insurance Now 00:00:00 Feedback Feedback 00:00:00