Cademy logoCademy Marketplace
  • Professional Development
  • Medicine & Nursing
  • Arts & Crafts
  • Health & Wellbeing
  • Personal Development

1762 Educators providing Outstanding courses

Outstanding
The City Of Edinburgh Music School

the city of edinburgh music school

Edinburgh

One year ago today, we were not sure how we would be delivering educational experiences for our students. Two years ago, the situation was even worse as we were not sure whether we would be able to offer anything meaningful at all in person. The relative normality of this year’s first day of school brings reassurance and joy. So far it seems that everyone has grown over the summer, and our returners look more confident and poised than they did six weeks ago. No doubt they have many stories to share, much better in person than through the various social media platforms that they have been inhabiting. Our new S1 students are excited about starting this new phase in their lives. A few have had to ask for directions to classes, but good for them that they have the confidence to do so. They will bring much to the future of our school and in the blink of an eye they will be in S6 preparing for the next phase. Being Part of the Community The vast majority of our students are showing their pride in being part of the Broughton High School community by wearing school uniform and dress code. That is part of their contribution to their school, and is most welcome. I would emphasise that although school uniform is much less expensive than the designer clothing that teenagers might choose to wear, we are keen to support families who are struggling with the cost of clothing. The best way to access this is via our guidance team, through either a direct phone call or an email to school reception. Academic Success More detailed information will be forthcoming, but I am absolutely delighted to share that the attainment gained by our S4-S6 students last year was outstanding. Despite the many challenges that they had to face, they contributed to the best set of SQA results that the school has ever seen. Better than the exam-free years of 2020 and 2021. Better than any year since statistics have been recorded in the current format. This is particularly remarkable, given that the national pass rates have actually declined this year. This level of academic success is not just down to ability but comes as a result of many factors: hard work and resilience; support from parents and carers; and untiring high quality teaching and regard from staff are some. A massive well done from me and the whole school staff to those young people. Senior Staffing News We welcome Mrs Lisa Evans to our school senior leadership team. Mrs Evans has been a curriculum leader in another Edinburgh school for the past eight years, and was previously an English teacher at Broughton. I am delighted that Mrs Evans is back in the Broughton HS family and we look forward to great things. Recently we also welcomed Mr Steven Frew back to Broughton HS after a few years as a curriculum leader in East Lothian. Mr Frew joined us just before the end of the summer term in the role of Senior Development Officer. One of his key roles is to explore the diversity in our school community and make the most of the opportunities that this provides. This will be fascinating and will provide further impetus to cohesion and success in our school. Mr Frew was also previously with us as a Business Education teacher. It speaks volumes for Broughton HS that staff who have progressed in their career are keen to re-join us further down the line. I am pleased to inform you that Mrs Shona Wallace, Depute Headteacher, has been appointed on an acting basis to the Headship of Craigroyston Community High School. Mrs Wallace will work hard – as she always does – to support the community at Craigroyston. We wish her well, and look forward to her return in the latter part of the academic year. Finally, I would like to thank our parental community for the support you give to our school. We will keep trying together to make things as good as possible for our young people. Most of the time we get it right, and long may that continue. John J Wilson Headteacher *********** Broughton High School aspires to be a learning community known for its excellent learning and teaching. We maximise student achievement; provide support, welfare and inspiration. We are committed to continual improvement. Our students will be confident, successful and able to contribute effectively and responsibly to society. They should foster an interest in life long learning. We are a consistently improving organisation. Our core values are the same - respect, inclusion and integrity in all that we do. Tolerance and a willingness to learn about other cultures have been at the heart of Scottish education for centuries. By embracing the Scottish tradition and developing through a curriculum for excellence we hope to develop as truly global citizens. Broughton High School is developing as a centre of excellence in the wider community with our business partners and neighbours utilising the building during and beyond the school day. The development of partnership working is important to us and we actively pursue their development. In school, it goes without saying that we provide a secure and healthy environment, but we aim for much more. We aspire to personal excellence at all times. In every classroom, on the playing fields, through every note played in the Music School we aim for the highest standards. These can only be achieved if the whole school community works in partnership.

Message
Moderntronics

moderntronics

Harrow,

In these terms and conditions (“Conditions”) the following expressions shall have the following meanings: “Business Day” means any day other than Saturday, Sunday or a public holiday. “Business Hours” means the hours detailed in Condition 32 below. “Contact Hours” means Monday to Friday (inclusive) from 07:00 hours to 17:00 hours but excluding bank holidays. “Contract” means any contract between MT and the Customer for the supply of Hardware and/or Software (with the associated Licence) and/or services which is subject to these Conditions. “Customer” means any person, firm or company who enters into a Contract with MT to which these Conditions apply. “Force Majeure” means any event outside the reasonable control of either Party affecting its ability to perform any of its obligations (other than as to payment) under these Conditions. “Goods” means all or any tangible or intangible goods or intellectual property including but not limited to Hardware and Software which are provided to a Customer in accordance with these Conditions. “Hardware” means any hardware provided by MT to the Customer. “MT” means MODERNTRONICS Ltd. or its servants and agents as the case may be. “Insolvency Event” means any one of the following in relation to the Customer: (i) a notice being issued to propose a resolution for winding up or dissolution, or such a resolution being passed; (ii) a petition for a winding up or an administration or bankruptcy order being presented, or such an order made; (iii)any steps being taken with a view to a voluntary arrangement or other assignment, composition or arrangement with all or any creditors or any moratorium, readjustment, rescheduling, forgiveness or deferral of all or any indebtedness; (iv) suspension of payments to all or any creditors and/or ceasing business; (v)an encumbrancer taking possession of all or any assets; (vi) an administrator or receiver being appointed over the Customer or all or any of its assets; (vii)any action anywhere similar or analogous to any of the foregoing; or MT reasonably believing that any of the foregoing is imminent. “Licence” has the meaning attributed to it in Condition 23 below. “Minimum Term” means the term set out in Condition 17 below. “Party” means MT or the Customer and “Parties” means both of them. “Response Time” means two Working Hours from an initial call to the hotline under Condition 26 or 28 below. “Seminar” means any seminar provided by MT. “Service Operator” has the meaning given to that term in Condition 28 below. “Site” means https://www.moderntronics.com and all subdomains including (but without limitation) “Software” means software or software updates or upgrades provided by MT and licensed to the Customer under Condition 23 below. “Training Sessions” means any training session provided by MT. “Working Hours” means the hours between 9:00 to 17:00 on any Business Day 2. Interpretation In these Conditions, the following rules apply: A person includes a natural person, corporate or unincorporated body (whether or not having separate legal personality). A reference to a Party includes its personal representatives, successors or permitted assigns. A reference to a statute or statutory provision is a reference to such statute or provision as amended or re-enacted. A reference to a statute or statutory provision includes any subordinate legislation made under that statute or statutory provision, as amended or re-enacted. Any phrase introduced by the terms including, include, in particular or any similar expression shall be construed as illustrative and shall not limit the sense of the words preceding those terms. A reference to writing or written includes faxes and e-mails. 3. General Information These Conditions apply when MT: sells and delivers Hardware; sells and delivers Licences; sells and delivers Software; or provides repairs or any other services to the Customer. They will also apply to other business transactions unless MT agrees that alternative special conditions apply. These Conditions apply to the exclusion of any other conditions that may be proposed by a Customer or implied by law (insofar as such exclusion is lawful). Part II Specific Provisions for the Use of the Online Shop Customers purchasing Goods from the Site, must read all Parts of these Conditions, which apply to them in full. 4. Consumers The Goods and services provided by MT are designed only for sale to and use by businesses in the course of their business activities. MT does not knowingly sell to any person dealing as a consumer or supply anything for personal use. 5. Customer’s Status By placing an order on the Site, the Customer warrants that he or she is: legally capable of entering into binding contracts and, where the Customer is an individual, that he or she is at least 18 years old; and is dealing in a business capacity and purchasing Goods and/or services for the purpose of his business and not for personal use. Part III General Conditions for the Provision of Goods and Services 6. Formation of Contract Quotations provided by MT to the Customer are not binding on MT. The Customer’s order constitutes an offer to MT to buy the Goods or services. All orders are subject to acceptance by MT. The offer will be deemed accepted, and a Contract formed, when MT sends the Customer confirmation that the Goods have been dispatched (“Dispatch Confirmation”) or, in the absence of a Dispatch Confirmation, when the Goods are delivered. The Contract will only relate to those Goods whose dispatch is confirmed to the Customer by a Dispatch Confirmation or if no Dispatch Confirmation is sent, those Goods which are actually dispatched. MT is not obliged to supply any Goods which may have been part of the Customer’s order until the dispatch of such Goods has been confirmed in a separate Dispatch Confirmation. Subject to Condition 17 below, an order for services will be deemed to have been accepted, and a Contract formed, when MT sends the Customer confirmation that the services ordered will be provided (“Service Confirmation”) or, in the absence of a Service Confirmation, when the services begin to be provided. Oral representations will only be binding upon MT if they are expressly confirmed in writing by MT to the Customer. 7. Price Unless MT expressly specifies prices to the Customer, MT’s current list of prices applicable at the time of the acknowledgement of order will apply. Unless otherwise agreed in writing, all prices are exclusive of value added tax, postage, freight, insurance, forwarding fees, installation and commissioning, travelling expenses and subsistence, which will be added as appropriate. MT will charge overtime for work outside of their normal Business Hours at up to 150% of the hourly rate from time to time applicable during Business Hours. Subject to Condition 16 below, prices are liable to change at any time, but changes will not affect orders in respect of which MT has already sent the Customer a Dispatch Confirmation or a Service Confirmation as the case may be. The Site contains a large number of products and it is always possible that, despite MT’s efforts, some of the products listed may be incorrectly priced. MT will normally verify prices as part of dispatch procedures so that, where a product’s correct price is less than our stated price, MT will charge the lower amount when dispatching the product to you. If a product’s correct price is higher than the price stated on our site, MT will normally, at our discretion, either contact you for instructions before dispatching the product, or reject your order and notify you of such rejection. MT is under no obligation to provide any Goods or services to the Customer at an incorrect (lower) price, even after MT has sent a Dispatch Confirmation or a Service Confirmation in relation to those Goods or services if such incorrect price could reasonably have been expected to be recognised by the Customer as an error. 8. Delivery and Availability The Customer’s order for Goods will be fulfilled by the delivery date in the Dispatch Confirmation or, if no delivery date is specified, then within 30 days of the date the Customer made his order (where such an order leads to a Contract). The period for delivery or performance of the Contract will normally commence on MT’s acknowledgement of the order. However, if the Customer is required to do anything before MT can effect delivery, MT will, as soon as practicable, notify the Customer accordingly. The time within which MT must deliver any Goods will run from the date on which MT receives notice from the Customer that it has duly complied with such notification from MT. Unless otherwise agreed in writing, any periods mentioned in the acknowledgement of order for services and Software development are based on a preliminary estimate of the required workload and therefore are approximate only. Time of delivery and performance is not of the essence. If MT fails to meet any delivery or performance dates set out in the acknowledgement of order and is solely responsible for such failure, the Customer may terminate the Contract but only after MT has been given an opportunity to rectify the situation and subsequently fails to meet the revised set of delivery or performance dates provided by MT to the Customer in writing. Unless MT has been deliberately or grossly negligent, all further claims of the Customer on the basis of the delay in performance are excluded. If MT cannot deliver or perform its obligations under the Contract due to Force Majeure or a failure of the Customer to cooperate or any other act, default or omission of the Customer, then MT will be entitled to perform its obligations under the Contract once the issue has been resolved, provided the issue occurred while MT was still allowed to deliver or perform and MT shall have no liability whatsoever for any delay or its failure to perform its obligations. 9. Agreed Performance Unless specified otherwise in writing, the agreed performance in respect of any repairs provided by MT, at the Customer’s request will be to adjust the relevant unit(s) to MT’s applicable standard specifications for that unit. Where the relevant unit(s) cannot be repaired to MT’s applicable standard specification due to the Customer limiting the repairs required or the time and money to be invested MT may exceed the Customer’s request if MT considers, at its sole discretion, that such additional repairs are reasonable and will ensure the proper functionality of the unit in question. The agreed performance levels for MT’s maintenance and care services are as set out in Conditions 26 and 28 below; for all other services the agreed performance levels will be as set out in the acknowledgement of order. 10. Refunds Where the Customer returns Goods (at the Customer’s cost) because he or she claims that the Goods are defective, MT will examine the returned Goods and will notify the Customer of its findings within a reasonable period of time. If MT (in its sole discretion) deems that the Goods are defective, MT may at its option repair, replace or provide a refund in respect of such defective Goods. MT will process any repair, replacement or refund as soon as practicable and, in the case of any refund, within 30 days of the day MT confirmed to the Customer that the Customer was entitled to the same. Such refunds will be made in full, including a refund of any delivery charges for sending the item to the Customer. 11. Import Duty If the Customer orders Goods for delivery outside the UK, they may be subject to import duties and taxes which are levied when the delivery reaches the specified destination. The Customer will be responsible for payment of any such import duties and taxes. Please note that MT has no control over these charges and cannot predict their amount. Customers should contact their local customs office for further information before placing an order. Customers must comply with all applicable laws and regulations of the country for which the Goods are destined. The Customer will indemnify and keep indemnified MT in respect of all costs, proceedings, losses and liabilities resulting from any breach by the Customer of any such laws. 12. Retention of Title to Property The Goods will be at the Customer’s risk from the time of delivery. Property in and title to all Goods will remain with MT until MT has received payment for the full price of all the Goods (and/or all other goods and/or services supplied by MT to the Customer under any other contract whatsoever).. The Customer may sell or use Goods in which title is retained during the course of their normal business, but may not give such Goods by way of pledge or pledge these Goods as security. Until the property in and title to the Goods passes to the Customer: the Customer shall keep the Goods properly stored, protected and insured and separate from all or any other goods whether belonging to MT, the Customer or any third party; MT shall be entitled at any time forthwith to revoke the Customer’s power to deal with the Goods; and such power shall automatically cease if an Insolvency Event shall occur in respect of the Customer; and the Customer shall not make any modification to the Goods, the Software or their packaging or alter, remove or tamper with any marks, numbers or other means of identification used on or in relation to the Goods. Upon termination of the Customer’s power to deal with the Goods, the Customer shall place the Goods at the disposal of MT and MT are hereby irrevocably authorised without the need for consent of any third party but using only such force as may be necessary, to enter upon any premises of the Customer or any third party for the purpose of removing the Goods. If third parties claim title to Goods with retained title, the Customer will inform MT without delay, will notify the person making the claim of MT’s title and will support MT in enforcing its rights, including taking all the necessary steps required to preserve MT’s rights, including commencing litigation at the Customer’s own expense. If the Customer breaches the Contract, e. g. by delaying payment, the Customer will be obliged to return the Goods with retained title if requested by MT, in return for which MT will not terminate the Contract. 13. Payment Where services, maintenance or care are provided on an ongoing basis, MT will invoice the Customer for these at the beginning of the billing period or as soon as reasonably practicable thereafter. The Customer will pay MT’s invoices in full within 30 days from the date of the relevant invoice. Depending on the scope of an order, payments for such services, maintenance or care are due either upon placement of the order by the Customer or upon partial delivery of the same of between 40 to 50% of their respective order value. BACS or cheque are the only methods of payment accepted. Invoices for Seminars and Training Sessions will be issued at the beginning of the respective session and payment is due immediately and without deduction. 14. Delay of Payment Where a Customer fails to pay an invoice by the due date, MT will be entitled to charge the Customer interest on all monies outstanding from the due date until the actual date of payment (both before and after judgment) at a rate of 8% above the base rate of the Bank of England calculated on a daily basis. 15. Setting-Off and Refusal of Payment The Customer cannot exercise any right of set-off in respect of amounts owed to or by MT. 16. Change of Pricing by MT for Ongoing Maintenance or Care MT may increase its prices for maintenance and services by giving the Customer written notice 2 months prior to the end of the Minimum Term. The Customer has 4 weeks from the date of receipt of the written notice from MT to object to the change. Where the Customer so objects, the Customer will be entitled to give notice to MT to terminate the Contract as of the date of the proposed price increase. 17. Automatic Extension of Contract Where services, maintenance or care are performed on an ongoing basis the Contract will come into effect upon acceptance by MT of the first order from the Customer for Software maintenance. The Contract will initially run until the date specified at “Minimum Service Duration” as set out in the “MT Service Product List” or until the expiry date where an expiry date is stipulated in the Contract (“Minimum Term”). Subject to one of the Parties serving written notice of termination on the other at least three months prior to the expiry of the Minimum Term, the Contract will be extended automatically. In the case of Software Licences supplied without a time limit, the Contract will extend until December 31st of the current year. The subsequent extension periods will begin on January 1st and end on December 31st of the respective year. In the case of Software Licences supplied with limited validity (e.g. a licence for 1-year) the extension is based on the terms and conditions set out in the description of the respective licence (e.g. extension by one further year). Unless otherwise agreed in writing, any extension to a Contract will be on the basis of MT’s current price list as at the date of such extension. 18. Delivery Obligations and Shipping The conditions for EXW (ex works) (MT’s premises or such other place referred to in the relevant order) as set out in the Incoterms 2010 apply to delivery of any Goods. Claims for any transport damages and any replacement of damaged Goods, remain with the Customer who is responsible for adhering to the mode and period for the filing of any claims with carriers, shippers and insurers. 19. Scope of Warranty (Material Deficiencies and Deficiencies in Title) MT warrants that the Hardware is free from defects in workmanship and material as at the time of transfer of risk; and warrants that the Software does not contain any flaws which void or substantially reduce its value or suitability for the usual or contracted purpose. Where MT is not the author of the Software, MT does not warrant that such Software will run without interruptions or errors, nor that MT will be capable of resolving all Software errors, nor that the Customer will be capable of achieving all of the functions included in the Software in all of the combinations chosen by the Customer, nor that these will meet the Customer’s requirements. MT will only warrant the quality and/or durability of Goods if it has expressly agreed in writing with the Customer that it will do so. The warranty period is 1 year. Where MT is the author of the Software such Software is subject to MT’s standard warranty. 20. Obligation to Inspect and Serve Notice of Defects The Customer must inspect the Goods upon delivery or repair and must notify MT in writing of any failure by MT to meet the specification within 7 days of delivery or repair or (where the failure was not apparent on reasonable inspection) within a reasonable time being no more than 1 month after discovery of the failure. Where the Customer fails to provide such notice MT will have no liability under its warranty. 21. Liability Subject only to Condition 21 d), MT shall not be liable to the Customer in contract, tort (including without limitation negligence) and/or breach of statutory duty for any loss or damage which the Customer may suffer by reason of any act, omission, neglect or default (including negligence) in the performance of the Contract by MT, its servants or agents, in a sum which is greater than GBP 200,000 per incident or series of connected incidents. Subject only to Condition 21 d), MT shall not be liable to the Customer whether in contract or tort (including without limitation negligence and/or breach of statutory duty) for indirect loss of any kind resulting from these Conditions, its performance or any breach of its terms. Subject only to Condition 21 d), MT shall not be liable to the Customer whether in contract or tort (including without limitation negligence and/or breach of statutory duty) for indirect economic loss of any kind including (but without limitation) loss of business opportunity, reputation, goodwill resulting from these Conditions, its performance or any breach of its conditions. Notwithstanding any other provision herein, nothing in these Conditions shall operate so as to limit or exclude MT’s non-excludable liability in respect of death or personal injury caused by the negligence of MT to exclude the application of Section 12 of the Sale of Goods Act 1979 and to exclude liability for fraudulent misrepresentation. MT’s liability for loss of data is limited to the effort required to restore the data from proper backups provided by the Customer. 22. Third Party Rights If any third party claims or takes action against the Customer, because Goods delivered by MT, or their use in accordance with the instructions provided by MT, purportedly violate their commercial rights or proprietary rights, then the Customer will inform MT of the same. MT agrees that they will assist the Customer in defending such claims. Where the claim is made to the Customer within 12 months of the date of delivery, MT will indemnify the Customer against claims provided that the Customer: appoints MT to defend the claims or to settle the dispute, and promptly notifies MT of any such claim, keeps the Customer informed of all information received and provides such reasonable assistance to MT as it shall reasonably require, does not defend the action itself without coordinating such defence with MT, and does not at any time admit liability or otherwise settle or compromise or attempt to settle or compromise the said claim or action except upon the express instruction of MT, the alleged breach of rights is not based on alteration of the delivered item used by the Customer, and does not use the item delivered by MT in conjunction with other items and/or in a fashion that breaches any such rights, in a situation where the use of the item as delivered by MT would not have breached the rights of the person who has filed the claim. MT may at any time and at its own expense acquire on behalf of the Customer the right to continue to use the Goods, to replace the Goods or alter them in such a fashion that the rights of others are no longer breached. If this is not possible, the Customer shall return or destroy the Goods if required to do so by MT who will reimburse the purchasing price for the Goods less depreciation. If the Customer refuses to do so, MT will no longer defend the claim or provide the Customer with any further support. The Customer has no further rights in case of disputes over proprietary rights with third parties and MT shall have no liability therefore unless MT could be blamed for acting deliberately or with gross negligence. Part IV Special Conditions for Delivery of Software 23. Conditions of Use for Delivered Software In the case of delivery of Software to the Customer, MT hereby grants the Customer a simple, non exclusive and non-transferable, licence to use the Software (“Licence”) . The validity of the Licence is not time limited, unless otherwise specified to the contrary in the terms and conditions of the Licence. MT, grants the Customer the use of such Software in the form of the object code and the user documentation with the use being restricted to one electronic data processing system at any one time and only for the tasks for which it is intended. Unless permitted by law, the Customer will not decompile the Software or perform reverse engineering. The Customer may duplicate the Software but only to the extent that this is required for the permitted use, and in order to allow it to perform data backup. Upon delivery of any Software, including updates and upgrades, the Customer will immediately produce a backup copy. MT may terminate the Licence granted to the Customer pursuant to this Condition 23 with immediate effect if the Customer is in breach of the conditions for the use of the Software for a period of 30 days from the date of a written notice of such a breach from MT or any third party. On termination of this Contract howsoever arising, the Customer will return to MT within 30 days all Software together with any related materials owned and licensed by MT and shall delete all copies and partial copies of the Software however stored within 7 days of service of the notice. Proof of such deletion must be provided to MT without delay. On receipt of prior written consent from MT, the Customer may retain a copy of the Software for the purposes of archiving. 24. Delivery of Software MT will only install the Software if this has been expressly agreed in writing between the Customer and MT. MT is able to provide telephone consultancy and support concerning questions relating to the application of the respective Software products as well as the solution of problems that may occur as provided for in Condition 26 below. 25. Prerequisites for Running the Delivered Software The proper running of Software systems supplied will only be guaranteed if the Hardware and operating system components used correspond to the reference systems of the respective manufacturer(s), as well as having been approved and certified. Unless otherwise agreed in the Contract, the Customer shall ensure that the provisions in this Condition 25 are complied with. Part VMaintenance and Care Application Software 26. Scope of Performance of MT Services for Application Software For the Software products, unless otherwise expressly agreed in writing, MT will provide the following services, denoted by Service Level “SW-Service STANDARD” and Service Level “SW-Service E-STANDARD”: Right to use Software and documentation updates: MT grants the Customer a non-transferable, non-exclusive Licence to use the Software and any documentation or updates. The right of use is not limited in validity, unless otherwise specified in the terms and conditions of the Licence. Software and documentation updates: MT will supply the Customer with the current version of the Software as specified in the Contract. This will be done as specified by the manufacturer of the Software. The documentation will be supplied in the form determined by the manufacturer of the Software. The installation of Software updates will be performed by suitably qualified personnel of the Customer. Alternatively for an additional charge, MT may install the Software updates on behalf of the Customer. Where the Customer has adapted the Software, the Customer will be liable for the additional cost of performing the same adaptation to the new version of the Software or alternatively the Customer may perform the necessary adaptation himself. Hotline (Service Level “SW-Service STANDARD” only) MT is able to provide consultancy and support by telephone or by e-mail in relation to queries relating to the application of the respective Software products as well as the resolution of any problems (in so far as it is reasonably practicable to do so) which may occur. This service will be provided by MT during the Contact Hours: Wherever possible, qualified consultancy will be provided by MT within the Response Time. E-mail Hotline (Service Level “SW-Service E-STANDARD” only) MT is able to provide e-mail consultancy and support in relation to queries relating to the application of the respective Software products as well as the resolution of any problems (in so far as it is reasonably practicable to do so) which may occur. This service will be provided by MT during the Contact Hours Wherever possible, qualified consultancy will be provided by MT within the Response Time. MT Hotline: E-mail: hotline@MT.com Internet: http://www.MT.com/customersupport Software error messages Where Software problems occur which MT is unable, for whatever reason, to resolve, the Customer may send a written error message to MT. The purpose of such an error message is to identify the error in the Software and enable the manufacturer to resolve the error. MT shall liaise with the manufacturer(s) of the Software products to resolve any Software errors as promptly as possible. Restoration of any data, regardless of the cause of the data loss, is not the responsibility of MT. 27. Obligation of the Customer to Co-operate Pre-conditions for the provision of the services by MT to the Customer are that the Customer has legally acquired the Software and holds a corresponding Licence to use it. In addition, the Software must be in the same condition that it was in when it was delivered. The services exclusively relate to the current release and delivered version of the Software. If earlier Software versions are used, a one-time update service which will be independently invoiced and paid for by the Customer will be provided to update the Software to the latest version. Services will not be performed for Software adaptations made by the Customer (for example including but not limited to macros, programs, variants, user interfaces and database applications). If the operating system for the Hardware is not included in the Contract, the Customer must update the operating system to the most recent version (e. g. by purchasing updates) if this is required in order to use the new versions of the application Software. Hardware and Operating Systems 28. Scope of Performance of MT Maintenance and Care Services for Hardware and Operating System For Hardware products and the operating system, unless otherwise agreed in writing, MT will provide the following services, denoted by Service Level “HW-Service SPECIAL”: The scope of performance is briefly set out in the “Special Description” for each product listed in the attached “MT Service Product List”. The exact scope of performance will be determined in accordance with the attached description of performance issued by the respective MT service operator (“Service Operator” including but not limited to Hewlett-Packard, Fujitsu Siemens and Silicon Graphics). The following shall also apply: Hotline MT is able to provide consultancy and support by telephone or by e-mail in relation to queries relating to the application of the respective Hardware products and operating system, as well as the resolution, (in so far as it is reasonably practicable to do so) of any problems which may occur. This service will be performed by MT during the Contact Hours: Wherever possible, qualified consultancy will be provided by MT within the Response Time. Where queries arise outside of the Contact Hours, the Customer should address such queries directly to MT’s Service Operator Response time for Hardware failures MT will use reasonable endeavours to solve a query within the Response Time. The Response Time shall be deemed to have been initiated either as soon as the customer service personnel arrives on the relevant site, or as soon as remote diagnosis is started, where either is required to resolve the problem. The appropriate Response Time will be determined in accordance with the attached description of performance issued by the respective MT Service Operator. 29. Services Not Included Unless otherwise agreed in writing, the following services will not be provided by MT to the Customer: a) Repair/re-acquisition of devices that have been damaged as a result of: incidents of war of any type civil wars, nuclear energy, deliberate action of the Customer (not of his subcontractors) b) Repair/re-acquisition that is required because of repair work or alterations of devices carried out by the Customer or any third party without the prior written consent of MT. c) Work required due to interface problems between MT’s devices and those of other manufacturers and suppliers. d) Customer service which is required because a product that is not covered under this Contract has caused an error. e) Customer service that has become necessary because devices have been used under adverse conditions (e.g. including contaminations and deviations from recommended room temperature and relative humidity) or in conjunction with accessories or (device-specific) consumables (e.g. including foreign disks, disk stacks, cassettes, printer paper and print heads of any type) (“Device Specific Consumables”) which do not meet the manufacturer’s specifications. f) Replacement of Device-Specific Consumables. g) Data backup. h) Calibration work that is not related to repair. 30. Restoration of Data/Programs The restoration of data and programs upon repair or replacement of a defective hard disk is limited to starting the copying program (Restore) used to restore the last full data backup. 31. Obligation of the Customer to Cooperate a) Hardware service Pre-conditions for the provision of Hardware services by MT are that the Hardware has been acquired legally and has been installed properly at the Customer’s site. In addition the Hardware affected must correspond to the current revision and be in proper condition when including in the Contract. These pre-conditions shall be met immediately after the expiry of the warranty period specified in the Contract. If the Hardware is included in the Contract at a later date, these pre-conditions must first be confirmed by a takeover inspection of the Hardware by MT, which will be independently invoiced and paid for by the Customer, and if required the pre-conditions will be achieved by MT undertaking the required repair work. b) Operating System Service Pre-conditions for the provision of operating system services are that the Customer has legally acquired the Software and has been granted the necessary corresponding Licence to use it. In addition the Software must be in the same condition as when it was delivered to the Customer. The services exclusively relate to the current release and version of the Software. If earlier Software versions are used, a one-time “Update Service” which will be independently invoiced and paid for by the Customer will be provided to update the Software to the latest version. Operating System services will not be provided for Software adaptations made by the Customer (for example including but not limited to macros, programs, variants, user interfaces and database applications). Part VI Generally Applicable Conditions 32. Prices and Fees for Special Services The following items are not included in the payment for services under Conditions 26 and 28 above and will be invoiced separately in accordance with MT’s current price list: Services performed outside Working Hours on the express request of the Customer. Services to correct errors caused negligently by the Customer or by any unauthorised third party as a result of improper treatment, unsuitable operating media, unauthorised manipulations, Software manipulations, non-adherence to operating conditions or otherwise. ices required due to faulty handling, excessive vibration, chemical influence, excessive dust burden or non-adherence to the properties set forth in the unit specifications. Unreasonable wait times and delays in the performance of services which are caused by the Customer. Services to remedy failures caused by Force Majeure. 33. Backup of Customer Data Prior to the commencement of any service work undertaken by MT, the Customer will backup all data in such a way that it may easily be restored by MT in the event that it is lost in the service process. 34. Change of Installation/Application Site Where maintenance and care services are provided on an ongoing basis by MT, the Customer will immediately inform MT in writing of any change to the installation or application address. If such a change results in an increase in MT’s expenses. MT reserves the right to either increase the prices charged to recover the additional expense incurred or alternatively MT may serve notice on the Customer to terminate the Contract where the new address is outside United Kingdom. 35. Miscellaneous Service Conditions and Obligations of the Customer to Co-operate MT may appoint authorised third parties to provide services. The Customer may only transfer title to services to third parties with the prior written consent of MT. Where defective components or devices are replaced by MT, these will become the property of MT. Extension of the products included in the maintenance agreement may be included in this Contract with the consent of the Customer. On request, MT will offer to the Customer a corresponding extension of the Contract, provided maintenance for the respective product is available. Where MT has to perform any services, the Customer shall accurately and without delay provide MT with any/all information that is required to perform such services. The Customer will provide MT with the name of a competent and appropriately qualified contact person and will provide the name of an appropriate substitute in order for the Hardware and Software to be maintained. Any contact(s) will have participated in the respective Seminars and/or Training Sessions held from time to time by MT or alternatively will have acquired comparable knowledge. These contacts will be available to MT’s technicians on site or will have access to the MT’s hotline as applicable. Consumables and Auxiliaries (which shall include documentation, application programs, data, telephone lines for transmission of voice and data) are not included in the scope of performance and shall be provided by the Customer in the vicinity of the system, such consumables and auxiliaries will be provided during Working Hours or, with prior consultation, outside of these hours. Additionally, the Customer will provide to MT computing time and consumables as required. 36. Specifically Ordered Service Days If service days are ordered for call-off within a specified period, such orders are binding. The services will become due for payment once they have been performed or by the end of the defined time period at the latest. Specifically ordered service days to be called off within a defined time period, can still be called off during a time of three months beyond the expiry of such defined time period. Thereafter they are lost. The claim to payment is thereby unaffected. For users that register on our website (if any), we also store the personal information they provide in their user profile. All users can see, edit, or delete their personal information at any time (except they cannot change their username). Website administrators can also see and edit that information.

Message
1...175176177

Courses matching "Outstanding"

Show all 1039

Leather Working Course

4.9(61)

By Jack Raven Bushcraft Ltd

Run from our indoor workshop in Tenterden, Kent, we’ve put this one-day leather working course together for anyone with an interest in leather, craft, or who simply wants to explore another avenue of bushcraft. You don’t need any previous experience with leather working as you will learn the core skills and techniques on the course. It’s a perfect introduction to making traditional leather items. So if you’re looking for an unforgettable day, join our experienced craftsman, Paul Bradley, in a leather working day that focuses on leather work tools, design and construction. We have designed this course around the making of a simple notebook holder. We have chosen this as a project as it covers all the basic skills required to produce almost any small leather goods. There is also large scope for customisation of your project. Along the way you will learn about different leathers, techniques and tools. Typically, you will, under the expert guidance and instruction of Paul Bradley: - Use the provided pattern to produce a leather cover for a standard 5.5 x 3.5 notebook - Be guided on how to design and draw out and customise a pattern - Learn all about the different tools used in leather working and how to use them - Learn how to cut out, assemble and mark for stitching - Learn and practice the techniques of the traditional saddle stitch to complete the assembly of your notebook - Learn how to finish your project with edge burnishing techniques and other small but important details that add to the overall professional look. A really great chance to begin a lifetime of making beautiful things! About us and the venue: Jack Raven Bushcraft was founded in 2011 and we've been delivering bushcraft, craft and foraging courses since then from our 30 acre private ancient woodland on the Kent Downs in an area of outstanding natural beauty. This course is held in a purpose built indoor workshop. What's included in the price? All tools, equipment and materials are provided, as well as a free notebook to take away with you. Tea and coffee provided. Cancellation policy Strict - Cancellation and a full refund can be obtained up to 8 weeks before the course starts

Leather Working Course
Delivered In-Person in Ashford
£105

Maintenance and Reliability Best Practices – Aligned with SMRP* Best Practices and the CMRP Certification Preparatory Course

By EnergyEdge - Training for a Sustainable Energy Future

Enhance your maintenance and reliability skills with EnergyEdge's course aligned with SMRP best practices and CMRP certification. Join now!

Maintenance and Reliability Best Practices – Aligned with SMRP* Best Practices and the CMRP Certification Preparatory Course
Delivered In-Person
£2,599 to £2,699

FLIGHT ATTENDANT VIRTUAL VIA ZOOM COURSE, EVENINGS

4.4(67)

By London Waterloo Academy

This 18 weeks Virtual Airline Cabin Crew course delivered via Zoom. Lessons scheduled for once a week, evenings from 6:30pm to 9pm. 98% Employment rate after completion of the course. Virtual Airline Cabin Crew which is also known as Air Hostess, Flight Attendant and Stewardess course – Join your lesson from wherever you are.  This intensive 18 weeks Virtual Airline Cabin Crew course designed for candidates who wish to: Travel the world and be paid for it Work in a friendly, collaborative atmosphere, 5000 metres above the sea level Build a global network This glamourous and exciting job requires lots of training and energy. Behind the beautiful smile of each flight attendant, stands a highly trained and skilled person who can deal with unforeseen situations on board.  98% Employment rate after completion of the course. How will you learn? Apart of our traditional class-based tuition, we also offer Virtual Learning courses. On our Virtual (live stream via Zoom) lessons, we provide the same quality of tuition as in the classroom. You only need a laptop, PC or tablet with either built in (or external) camera and microphone. The virtual platform is very interactive with a sense of real classroom at the Academy. You will study from the comfort of your own home and communicate with your tutor and classmates via video chat (by using your phone or computer camera) and you will receive outstanding tuition, qualification, and certification. We provide A-Z guidance starting from before and after the course. Your tutor will guide you through the online course to graduation which you will be welcome to attend. What a joy it would be to meet your tutor and classmates in real life!! You will have: According to the timetable- 1 lesson per week for 18 consecutive weeks. Exams and final exam based on which the certificate will be issued. On successful completion you will hold: Airline Cabin Crew certificate in Current Airline Training Standards and Equipment. Individual support on the journey from the course to a job placement Receive constant updates on recruitment and news from Aviation the world We will enhance your CV Full support on your job application process Gain an insight into the airline selection process and final one-to-one interview What is Flight Attendant? Flight attendant/Airline Cabin Crew/Stewardess/Air Hostess are the most visible, glamorous jobs of all airline employees. A Flight Attendant is someone whose primary duty is to ensure the safety and comfort of passengers during a flight. They are members of an aircrew team , who operate a commercial, business or even military aircraft while travelling domestically or internationally.  Flight Attendant benefits: Getting paid for travelling the world Lifestyle Flexible Work Schedules Meeting Interesting People Free Food & Accommodation Excellent Compensation The uniforms Working Environment How to become successful Flight Attendant job candidate?Our Aviation Team understands each candidate who wish to become Airline Cabin Crew or start a career in Aviation. Airline companies look for individuals who share their values and can act as ambassadors for the company’s brand. Cabin Crew are the face of the airline company which means they deliver a fantastic service that makes airline world famous. Airline companies prefer candidates with knowledge of Cabin Crew role. Airline companies have selection day or online tests as a first stage of recruitment, after which, they will take a closer look at applicants CV, skills and experience. If you completed Airline Cabin Crew course, your application will stand out and you can get an offer from the first round.  Student – Cabin Crew Flying Support Group As a market leading Airline Cabin Crew Training Company with a wealth of experience in Aviation and recruitment, we constantly upgrading our course and going extra nautical mile to guide and support all our students to ensure they can reach their goals. Graduates who are already flying, offer their full support to us and new students. They share an insight of the airline they already fly with, and help new students through the process of joining them at that airline. It gives a flying start to a career to new learners.  Why London Waterloo Academy? Top Airline Cabin Crew course provider in London 98% Employment rate after completion of the course With years of experience in Airline Cabin Crew industry, London Waterloo Academy has been recognised by major TV, radio channels who have invited our Aviation Team for expert advice or interview. We are recognised by major airline companies in Europe and overseas who have approached London Waterloo Academy to deliver internal cabin crew training, corporate training and to recruit our graduates as a result of their high qualification standards and knowledge. Our graduates are now flying with Etihad, Saudi Air, Hainan Airlines, Small Planet, British Airways, Qatar, EasyJet, Thomas Cook, Ryanair, Cubana de Aviación, Air France,Titan, Norwegian B737 Short Haul and many more. The vast global experience of our instructors This course has been developed in accordance with EASA PART-CC Working together – Starting a new career isn’t easy and often it can seem like a lonely and impossible process. Our Aviation Department stays behind each learner, supporting every step of the way, we give you all the tools, skills and assistance you need to succeed. Our success, built on the success of our students and a long list of graduates with successful stories. Course Entry Requirements: English Language at B2 (CEFR) level or above. There are no other special requirements for this Airline Cabin Crew course. We will teach you from scratch and support after the course when applying for the job. This course has been developed for all candidates, independent of their background, wishing to start a new career.  Dates (choose one for your course): 14 March 2024 – 11 July 2024, Thursday classes 10 June 2024 – 7 October 2024, Monday classes 17 September 2024 – 14 January 2025, Tuesday classes 18 November 2024 – 17 March 2025, Monday classes Course duration – 18 weeks Classes – once a week Lesson Time – 6:30pm to 9pm – GMT (London time) Course fee – £529 (we offer flexible payment plan and accept weekly instalments) Registration fee – £300 (includes: examination, Airline Cabin Crew certificate in Current Airline Training Standards and Equipment)

FLIGHT ATTENDANT VIRTUAL VIA ZOOM COURSE, EVENINGS
Delivered Online + more
£300 to £529

ILM Level 3 Award in Leadership and Management

By Dickson Training Ltd

An accredited qualification for current and prospective managers. This programme gives Team Leaders & Managers the skills, disciplines and confidence to manage their team effectively and add a great deal more value to the organisation - where they have to apply their learning in order to achieve the highly coveted ILM qualification. One of the main responsibilities of a manager is to make sure that employees are satisfied with their job and reaching their full potential. A manager who can energise his or her employees will have a team which has a much greater potential and capability of achieving company goals and objectives. It is therefore vital that a manager has the essential skills to fully support and lead their team to success. This 3-day programme brings together the key leadership skills that you will need to be an effective manager so that you can return to the workplace and deliver tangible results. All of our ILM Programmes are provided in partnership with The BCF Group, which is the ILM Approved Centre we deliver under. Course Syllabus The syllabus of the ILM Level 3 Award in Leadership and Management course is split into three main modules, covering the following: Module OneSolving Problems and Making Decisions What is a problem? How to identify a problem, its nature, scope and impact Identifying the root cause Understanding how to interpret information to solve a problem What is involved in making an informed decision? Generate ideas/solutions- creative thinking techniques How to evaluate your options Finding the critical path Having confidence to commit to a decision Planning approach Communicating the decision Implementing the plan Module TwoUnderstanding Leadership What is leadership? Recognise the differences and similarities between leadership and management Qualities and skills of a leader Action Centered Leadership - Team, Task, Individual - John Adair Varying leadership styles Evaluating a range of leadership models and their significance for: Task, Performance, Culture, Relationships Reflect on your own leadership styles and behaviours Create an action plan to enhance your performance Module ThreeUnderstanding the Communication Process in the Workplace Identify what is effective communication Understand the importance of effective communication at work Recognise the different ways we communicate Recognise possible barriers to communication and how to overcome them Johari's window - communication flows How others will perceive and interpret the information you have provided Active listening Developing questioning skills Understanding the significance of non-verbal communication and body language Developing sensory acuity and how to use it effectively in the workplace In-House & Classroom Courses Available Online We have developed an alternative to traditional face-to-face training that continues to provide a full learning experience, and allows delegates to learn effectively whilst self-isolating from home. This is how it looks: Delegates booked on Classroom and In-House courses will continue to have access to their trainer online throughout the days that the course is booked to run. Prior to a delegate's course start date, they will be enrolled on our e-learning platform (in partnership with BCF Group) for the course they are booked on to. They will also be given contact information for their trainer, and details of how to access the online workshops. Delegates will not require any special IT equipment. A desktop computer, laptop, tablet, or a mobile phone with internet and audio capability is all that is required. Delegates taking ILM Qualifications will then proceed to the book review, video review and work based assignments with 12 months tutor support as appropriate, and in line with our previous arrangements. We hope you agree that this blended learning experience represents the safest way to continue supporting our clients and delegates during the Coronavirus disruption. In-House Courses As well as being one of the most popular open courses, we can also arrange this course as an in-house programme for companies and organisations who wish to develop a number of their managers at the same time, and would find an in-house course at their own premises much more suitable. Scheduled Courses Classroom Course - Nottingham (NG12 4DG) Classroom training courses enable you to benefit from having the tutor and other delegates right there in the room with you. Face-to-face training sessions are one of the best ways to learn, as it is easy to ask questions and have group discussions. In addition to the 2 days in the classroom, delegates will need to undertake self-directed learning and 2 work-based assignments. Cost: £995 + vat 07-08 September 2023 14-15 December 2023 12-13 February 2024 Classroom Course - Reading (RG41 5QS) Classroom training courses enable you to benefit from having the tutor and other delegates right there in the room with you. Face-to-face training sessions are one of the best ways to learn, as it is easy to ask questions and have group discussions. In addition to the 2 days in the classroom, delegates will need to undertake self-directed learning and 2 work-based assignments. Cost: £995 + vat 05-06 October 2023 15-16 January 2024 11-12 April 2024 Zoom™ Course Attending a course via Zoom videoconferencing gives you all of the benefits of classroom training without the need to leave your home or office. You still benefit from a real tutor facilitating the programme, and the content is exactly the same. The only difference is that we split the course into four half-day sessions to make it easier on your eyes! Cost: £895 + vat November 2023 - 7th Nov (morning), 7th Nov (afternoon), 8th Nov (morning), 8th Nov (afternoon) March 2024 - 19th Mar (morning), 19th Mar (afternoon), 20th Mar (morning), 20th Mar (afternoon) June 2024 - 11th Jun (morning), 11th Jun (afternoon), 12th Jun (morning), 12th Jun (afternoon) Dickson Training Ltd Founded in 1985 in Yorkshire, we have built an impressive and loyal client base. Our partnerships are built by consistently delivering outstanding development solutions and working in close collaboration with our clients, resulting in us becoming a leading UK and international training provider.

ILM Level 3 Award in Leadership and Management
Delivered in Nottingham or Online + more
£895 to £995

VIRTUAL AIRLINE CABIN CREW COURSE

4.4(67)

By London Waterloo Academy

This intensive 9 weeks Virtual Airline Cabin Crew course will give you all the information and tools you will need to become successful job candidate. 98% Employment rate after completion of the course. Virtual Airline Cabin Crew which is also known as Air Hostess, Flight Attendant and Stewardess course – Join your lesson from wherever you are.  This intensive 9 weeks Virtual Airline Cabin Crew course will give you all the information and tools you will need to become successful job candidate.   98% Employment rate after completion of the course. How will you learn? Apart of our traditional class-based tuition, we also offer Virtual Learning courses. On our Virtual (live stream via Zoom) lessons, we provide the same quality of tuition as in the classroom. You only need a laptop, PC or tablet with either built in (or external) camera and microphone. The virtual platform is very interactive with a sense of real classroom at the Academy. You will study from the comfort of your own home and communicate with your tutor and classmates via video chat (by using your phone or computer camera) and you will receive outstanding tuition, qualification, and certification. We provide A-Z guidance starting from before and after the course. Your tutor will guide you through the online course to graduation which you will be welcome to attend. What a joy it would be to meet your tutor and classmates in real life!! You will have: According to the timetable- 1 lessons per week for 9 consecutive weeks. Exams and final exam based on which the certificate will be issued. On successful completion you will hold: Airline Cabin Crew certificate in Current Airline Training Standards and Equipment.  What is Flight Attendant? Flight attendant/Airline Cabin Crew/Stewardess/Air Hostess are the most visible, glamorous jobs of all airline employees. A Flight Attendant is someone whose primary duty is to ensure the safety and comfort of passengers during a flight. They are members of an aircrew team , who operate a commercial, business or even military aircraft while travelling domestically or internationally.  Flight Attendant benefits: Getting paid for travelling the world Lifestyle Flexible Work Schedules Meeting Interesting People Free Food & Accommodation Excellent Compensation The uniforms Working Environment How to become successful Flight Attendant job candidate?Our Aviation Team understands each candidate who wish to become Airline Cabin Crew or start a career in Aviation. Airline companies look for individuals who share their values and can act as ambassadors for the company’s brand. Cabin Crew are the face of the airline company which means they deliver a fantastic service that makes airline world famous. Airline companies prefer candidates with knowledge of Cabin Crew role. Airline companies have selection day or online tests as a first stage of recruitment, after which, they will take a closer look at applicants CV, skills and experience. If you completed Airline Cabin Crew course, your application will stand out and you can get an offer from the first round.  Student – Cabin Crew Flying Support Group As a market leading Airline Cabin Crew Training Company with a wealth of experience in Aviation and recruitment, we constantly upgrading our course and going extra nautical mile to guide and support all our students to ensure they can reach their goals. Graduates who are already flying, offer their full support to us and new students. They share an insight of the airline they already fly with, and help new students through the process of joining them at that airline. It gives a flying start to a career to new learners.  Why London Waterloo Academy? Top Airline Cabin Crew course provider in London 98% Employment rate after completion of the course Individual support on the journey from the course to a job placement With years of experience in Airline Cabin Crew industry, London Waterloo Academy has been recognised by major TV, radio channels who have invited our Aviation Team for expert advice or interview. We are recognised by major airline companies in Europe and overseas who have approached London Waterloo Academy to deliver internal cabin crew training, corporate training and to recruit our graduates as a result of their high qualification standards and knowledge. Our graduates are now flying with Etihad, Saudi Air, Hainan Airlines, Small Planet, British Airways, Qatar, EasyJet, Thomas Cook, Ryanair, Cubana de Aviación, Air France,Titan, Norwegian B737 Short Haul and many more. We will enhance your CV Guidance through the job application process (free of charge) Gain an insight into the airline selection process and final one-to-one interview The vast global experience of our instructors This course has been developed in accordance with EASA PART-CC Working together – Starting a new career isn’t easy and often it can seem like a lonely and impossible process. Our Aviation Department stays behind each learner, supporting every step of the way, we give you all the tools, skills and assistance you need to succeed. Our success, built on the success of our students and a long list of graduates with successful stories. Course Entry Requirements: English Language at B2 (CEFR) level or above. There are no other special requirements for this Airline Cabin Crew course. We will teach you from scratch and support after the course when applying for the job. This course has been developed for all candidates, independent of their background, wishing to start a new career.  Dates (choose one for your course): 15 May 2024 – 10 July 2024, Wednesday classes 18 September 2024 – 6 November 2024, Wednesday classes 14 November 2024 – 9 January 2025, Thursday classes Course duration – 9 weeks Classes – once a week Lesson Time – 10am to 5pm – London time Course fee – £529 (we offer flexible payment plan and accept weekly instalments) Registration fee – £300 (includes: examination, Airline Cabin Crew certificate in Current Airline Training Standards and Equipment)

VIRTUAL AIRLINE CABIN CREW COURSE
Delivered Online + more
£300 to £529

A kinder sense of yourself - mindful movement classes

By Jonathan Young

Learn to respect and enjoy your own sensations, deepen your breathing and discover how engaging your whole self opens up new freedoms of moving, feeling and thinking for your life. Gentle Awareness through Movement (Feldenkrais) classes, usually done lying on a mat.

A kinder sense of yourself - mindful movement classes
Delivered Online + more
£48 to £95

Creative Pattern & Garment Making (GODALMING)

5.0(3)

By Textiles Skills Centre

Practical Creative Pattern and Gament Making Course, for teachers of GCSE D&T and Art & Design Textiles.

Creative Pattern & Garment Making (GODALMING)
Delivered In-Person in Nr Guildford
£195 to £230

Providing Outstanding Customer Service

By Nexus Human

Duration 2 Days 12 CPD hours This course is intended for Operations managers, account representatives, customer service staff, help desk and technical support, and anyone working directly with customer will benefit from this course. Overview Define customer service in relation to both internal and external customers Recognize how your attitude affects customer service Identify your customer\'s needs Generate repeat business with outstanding customer service Build goodwill through in-person customer service Provide outstanding customer service over the phone Connect with customers through online tools Deal effectively with difficult situations This course offers practical tools and techniques to win clients, create loyal advocates for your business, and deliver excellent customer service. Private classes on this topic are available. We can address your organization?s issues, time constraints, and save you money, too. Contact us to find out how. 1. Customer Service - A Baseline Recognizing Your Customers Understanding Your Role in Customer Service 2. Developing A Customer Service Mind-Set Leveraging Your First Impression Feeling Positively About Customers Mastering Moods and Emotions 3. Identifying Customer Needs Understanding the Customer\'s Situation Avoiding Assumption and Prejudgment Meeting Basic Needs Seeking to Exceeding Expectations Building Repeat Relationships 4. Connecting with the Customer Achieving Authenticity through Body Language Responding Effectively to Problems Mastering Online Etiquette Seeking Customer Feedback 5. Dealing with Difficult Situations Effectively Addressing Complaints De-escalating Anger Establishing Common Ground Remaining Calm, Respectful and Objective 6. Effectively Addressing Complaints Creating a Memorable Customer Experience Additional course details: Nexus Humans Providing Outstanding Customer Service training program is a workshop that presents an invigorating mix of sessions, lessons, and masterclasses meticulously crafted to propel your learning expedition forward. This immersive bootcamp-style experience boasts interactive lectures, hands-on labs, and collaborative hackathons, all strategically designed to fortify fundamental concepts. Guided by seasoned coaches, each session offers priceless insights and practical skills crucial for honing your expertise. Whether you're stepping into the realm of professional skills or a seasoned professional, this comprehensive course ensures you're equipped with the knowledge and prowess necessary for success. While we feel this is the best course for the Providing Outstanding Customer Service course and one of our Top 10 we encourage you to read the course outline to make sure it is the right content for you. Additionally, private sessions, closed classes or dedicated events are available both live online and at our training centres in Dublin and London, as well as at your offices anywhere in the UK, Ireland or across EMEA.

Providing Outstanding Customer Service
Delivered OnlineFlexible Dates
£1,500

Outstanding Customer Service - The Ultimate Guide!

By iStudy UK

In this exclusive course on customer service, you will gain access to the powerful secrets of providing outstanding customer service. Outstanding Customer Service - The Ultimate Guide, a course designed by Prof. Paul Cline and Sandor Kiss, will explain how vital excellent customer service is. Great customer service and poor customer service would directly lead to the success and failure of a company.  What do you learn from the course? You'll know how to stop losing money for poor or average customer service. The pitfalls of poor customer service will be explained to you, and you will gain knowledge of the tactics of building outstanding customer service. Finally, you will know how to handle difficult customers like a pro taking the course. What You'll Learn STOP Losing Money Due to Poor or Average Customer Service! $$$ Make MORE Money from Each Customer! $$$ SAVE a Fortune in Advertising Dollars! $$$ Get MORE Referrals! $$$ Solve Problems FAST! Retain Existing Customers! Learn How to Create an Outstanding Customer Service Experience Learn the 5 Tenets of TQM Avoid the 10 Deadly Sins of Customer Service! How to Handle Difficult Customers like a PRO! ... and MUCH More!!! Why You Should Choose 'Outstanding Customer Service - The Ultimate Guide' Access from all types of devices with internet access and optimum screen size 2.5 hours of video lessons 1 full-length 1 resource to download A CPD-accredited certificate of completion Opportunity to download PDF certification promptly after successful completion of the course. Learning the ways of minimizing loss due to average or poor customer service Understanding how to handle difficult customers Learning to create an excellent customer service experience Avoiding the mistakes and errors in customer service Gaining knowledge of handling customers for retention Who Is This Course For? The course is for anyone who is working in customer service or owns a business. Salespeople, managers, customer services executives and anyone with customer service-related responsibilities can take the course. Requirements Basic / Simple Computer Skills Basic English Career Path With excellent customer service, you get to know people better. Your business will gain because of your customer service skills, and eventually, you will grow with your company. Outstanding Customer Service - The Ultimate Guide! WHY Customer Service Is CRITICAL To Your Business! FREE 00:05:00 Good Isn't Good Enough! FREE 00:03:00 We Are ALL in the 'Helping Field' 00:10:00 Providing 'Concierge' Level Of Service 00:06:00 The 5 Tenets Of TQM 00:03:00 How To Boost Customer Satisfaction 00:08:00 How To Avoid The 10 Deadly Sins Of Customer Service! 00:15:00 More Money $$$ - Through Customer Retention 00:05:00 How Much Is A Customer Worth? $$$ 00:08:00 Do You Understand Your Customer? 00:07:00 Dealing With Difficult Customers 00:19:00 'LEAP' Into Customer Service! 00:18:00 Exceptional Phone Service 00:17:00 WHY Customers Buy From YOU! $$$ 00:17:00 BONUS LECTURE!!! FINAL TIPS!!! 00:07:00 BONUS LECTURE!!! FINAL TIPS!!! 00:17:00

Outstanding Customer Service - The Ultimate Guide!
Delivered Online On Demand2 hours 45 minutes
£25

24-hour Postural Care from Cradle to Grave (Nov 24-Jan 25)

5.0(1)

By Born at the Right Time

CPD certified, digital study session, 24-hour postural care training, learning new ways to bring excellence to 24-postural care, focussing on supported lying.

24-hour Postural Care from Cradle to Grave (Nov 24-Jan 25)
Delivered Online + more
£255
Show all 1039

Search By Location