553 Operations courses

Some 60% of injuries at work are caused by lifting heavy objects. This powerful, practical programme is designed to help stop any of your staff from becoming the next statistic. 1 Introduction and objectives 2 Overview of Health and Safety Legislation and HSE Injury Statistics Health and Safety at Work Act 1974 Management of Health and Safety at Work Regulations (MHSWR) 1992 MHSWR 1999 specific duties to risk assess Manual Handling Operations Regulations (MHOR) 1992 Breakdown of injury statistics and costs of poor manual handling 3 The musculoskeletal system explained Prevention and ill-health Ergonomics RSI The spine in detail 4 Risk assessment General principles The TILE method Employees' duties Workplace scenarios

Carried out by qualified instructors, the Manual Handling Training course is designed to cover a number of Manual Handling topics. It will enable the candidate on completion to recognise a manual handling problem. It will give them the tools to be able to initiate a risk assessment and lift or carry in a safe manner. We can deliver these courses in-house or to gain Qualsafe certification. Fully Qualified and Highly Experienced Instructors. Half day course (2-3 Hours). Our courses include the following subject areas: The requirements of the Manual Handling Operations Regulations. The legal requirements to provide Manual Handling Training. Principles of good movement. The anatomy of the spine. Manual Handling related injuries. Mechanics of incorrect and correct manual handling techniques. Practical exercises. Principles of manual handling techniques will include: The task. The load. The working environment. The individual capability. Practical applications of lifting, pushing, pulling and carrying. Risk Assessment and its practical application. There is a Maximum of up to 20 Candidates per Manual Handling training course, however we can run two courses per day with one manual handling instructor. We also have more manual handling instructors available, if it is required. This means we can run courses simultaneously should the facilities be available to do so. The course information is based on the Manual Handling Operations Regulations 1992, amended 2002. It is also covered under the Health and Safety at Work Act 1974. At MHA Training we like to make our Manual Handling Training courses fun and use the best training aids available whilst also covering the serious points of the subject. MHA Training was established in 2008 based at our training centre in Warrington, Cheshire. We provide a wide range of services On-Site also for clients around the North West in areas such as Manchester, Liverpool, Widnes, St Helens, Runcorn, Wigan, Preston and Leeds. Over the years we have expanded and have instructors available for all of our courses Nationwide.

Working within Heath and Social Care settings often involves moving, lifting, or otherwise manually handling the people within your care. This moving and handling training course is designed to educate learners regarding both the requirements and risks associated with moving people safely. Learners will also participate in practical moving & positioning enabling competency sign-off.

Java Threads Course Duration: 1 Day Who would find this course useful? Java coders Level: Not quite basics level. It specifically concentrates on Threads Principles (Threads) in Java. Download: Download Java JDK and Eclipse IDE. For classroom courses: Bring your own device. Java Threads Course description General Threads Concepts Java Threads Course Description General Threads Concepts Multithreading Cycle of a Thread Create a Thread by Implementing a Runnable Interface Create a Thread by Extending a Thread Class Major thread operations Processes and Threads, Thread Objects Thread Methods getName, getId, setName, etc Pausing Execution with Sleep Interrupts, Joins Thread Priorities Thread Pools Executors, Executor Interfaces, Thread Pools, Fork/Join Synchronozation What is thread synchronization? Thread Interference, Memory Consistency Errors, Synchronized Methods, Lock Objects, Intrinsic Locks and Synchronization, Handling interthread communication, Handling thread deadlock, Liveness, Starvation and Livelock, Atomic Access. Concurrent Collections Guarded Blocks, Immutable Objects. Strategy for Defining Immutable Objects, High Level Concurrency Objects, Java Threads Course, 1 Day What is included PCWorkshops Course Certificate on completion Java Threads Course Notes Java Threads Code Examples Practical exercises, Java Course Revision work After the course: 1-Hour personalised online revision session About us Our experienced trainers are award winners. More about us FAQ's Client Comments

​CHANGE YOUR LIFE IN JUST 36 HOURS 3 DAYS PACKED FULL OF FUN, CHALLENGE, INSPIRATION, INSIGHTS AND MOTIVATION. THIS 3- DAY EVENT MIMICS ASPECTS OF YOUR EVERYDAY LIFE THROUGH CHALLENGES, EXERCISES AND TASKS. IT HELPS YOU SHIFT FROM FEELING STRESSED, STUCK, SEARCHING TO ENERGISED, ELEVATED AND ENGAGED.

The BA (Hons) in Business Management with a Foundation Year, in collaboration with Leeds Trinity University, spans four years and is designed to empower students with the necessary academic skills and tools for confident study. Throughout the program, students engage in modules aimed at enhancing their academic abilities and gaining foundational knowledge in business operations and management principles, including insights into entrepreneurship and the basics of marketing.  Upon the successful completion of the Foundation Year, students seamlessly transition to the first year of the Business Management BA (Hons) degree. The curriculum delves into the intricacies of organizational structures and operational strategies, covering fundamental aspects of accounting, finance, marketing, and providing opportunities to explore international business concepts. Developed in collaboration with employers, the program offers a comprehensive education in various facets of modern business management, addressing not only organizational challenges but also legal, ethical, and sustainability issues confronting companies in the contemporary business landscape. 

This course is for 16+ candidates who are absolute beginners and are interested in the recording, production and engineering of music and sound. Candidates will learn to develop and practice their skills using a variety of sound equipment and DAW software. Explored skills are basic recording studio operations (live studio sessions), the use of loop sequencing software, and an introduction to audio and MIDI editing techniques.  Day: Monday & Wednesday evenings (one academic year) Times: 6pm - 9pm Who is this course for?  This course is an entry-level precursor and prepares learners for the full Level 2 Music Technology qualification. More able learners can also do the parallel Level 2 course if desired. What will I learn?  This will include course objectives. •Use Midi sequencing and software •Use Midi & Audio techniques •How to use computerized file location, file saving and backup procedures •Record and mix down a combination of MIDI and AUDIO materials •How to build a portfolio of evidence to show development of your work.

This course follows the Institute of Occupational Safety and Health's syllabus. A one-day programme, it is suitable for all people at all levels in the workplace and gives a basic introduction to the principles of environmental management. On successful completion of the course, participants will be able to: Understand the terms 'environment' and 'pollution' Understand the terms 'hazard' and 'risk' related to the environment Better appreciate environmental issues generally, and specifically in respect of their organisation Identify hazards to the environment from working practices Outline the procedures/controls necessary to prevent damage to the environment 1 What is the environment? - putting the environment in context Key environmental issues and how we contribute Definition of the environment 2 Working with the environment What is pollution? Sources, receptors and pathways Environmental consequences workshop - identifying the environmental consequences of our working practices Environmental risk assessment Effective control mechanisms 3 Protecting the environment - Environmental Management Systems What is an Environmental Management System (EMS)? What are the benefits of having an EMS? EMS structure and models Identifying what elements of EMS your company has and how they work Roles and responsibilities 4 Choice of module Option 1: Organisation-specific moduleThis module can be used to introduce environmental concepts that are specific to your activities and operations, and will be compiled through discussion with your organisation Option 2: Environmental best practiceIf no organisation-specific module is required, or if participants from a number of organisations attend, generic operational environmental best practices can be covered instead. Areas covered include waste management, fuel storage and use, hazardous materials, emissions to air and water and environmental incidents

About this Virtual Instructor Led Certificate Training Course (VILT) Asset maintenance and equipment reliability teams play a significant role to ensure that there is no room for downtime and losses in production. They are often recognised for their contribution and ability to keep assets running productively in today's organisations. The Certificate in Asset Management Virtual Instructor Led Training (VILT) course will provide those involved in Asset Management with a full explanation of the key processes to manage assets across their lifecycle. This recognised VILT course has been designed to equip participants with practical skills to take back to work. This VILT course enables participants to ensure their organisation's assets are realising their full value in support of the organisation's objectives. Accredited by the Institute of Asset Management (IAM), this VILT course will prepare participants to sit for the IAM Asset Management Certificate qualification. The IAM exam is offered as an option for participants of this VILT course. Training Objectives By the end of this VILT course, participants will be able to: Understand the key principles, tools and terminology of Asset Management, and demonstrate how it will benefit your organisation Gain familiarity in the application of ISO 55000 in practice Access a range of models that will support the implementation of asset management in your organisation Assess your understanding of the current tools and concepts applied in Asset Management Capture new ideas and skills that will enhance performance and be better prepared for the Institute of Asset Management (IAM) Certificate Examination Target Audience This VILT course will benefit maintenance managers, operations managers, asset managers and reliability professionals, planners and functional specialists. It will also be useful for facilities engineers, supervisors/managers and structural engineers/supervisors/ and managers. IAM Qualifications Syllabi This document details the scope of the individual topics which comprise the examination modules, and how the exams are assessed. It is important that prospective candidates understand the scope of the modules to determine the preparation required. Download here IAM Qualifications Candidate Handbook This handbook provides more detailed information on registering as a candidate, learning resources, training courses, booking an exam, exam regulations and what happens after an exam - whether you are successful or unsuccessful. Download here Course Level Basic or Foundation Training Methods The VILT course will be delivered online in 5 half-day sessions comprising 4 hours per day, with 2 breaks of 15 minutes per day. Course Duration: 5 half-day sessions, 4 hours per session (20 hours in total) Other than world-class visuals and slides, this VILT course will include a high level of interaction between the facilitator and participants and group discussion among the participants themselves. There will be a number of exercises & quizzes to demonstrate key points and to give participants the chance to apply learning and appreciate key aspects of best practice. Participants will also have the chance to share examples from their own experience, discuss real problems they are facing and develop actions for improvement when they return to work. Examples of the exercises that are used in this VILT course are as follows: Exercises: Aligning Assets to Business Objectives, Planning for Contingencies, Understanding Function and Failure. Group exercises: Asset Management Decision Making, Incident Review & Operations Optimisation. The workshop content will be adjusted based on the discussions, interests and needs of the participants on the course. Trainer Your expert course leader is a is a highly experienced in maintenance and turnaround specialist. He is a Chartered Mechanical Engineer, having spent 19 years working for BP in engineering, maintenance and turnaround management roles. During this time, he worked on plants at all ages in the lifecycle, from construction, commissioning and operating new assets to maintaining aging assets and decommissioning. He has taken roles in Projects, Human Resources and Integrity Management which give real breadth to his approach. He also specialized in Continuous Improvement, gaining the award of International Petrochemical Coach of the year. He stays up to date with the latest industrial developments through his consulting support for major clients. He is also the Asset Management lead and a VILT specialist, having delivered over 70 days of VILT training in the last year. He has an engaging style and will bring his current industrial experience, proficiency of VILT techniques and diverse content, gathered from a comprehensive training portfolio, to deliver a distinctive training experience. POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information about post training coaching support and fees applicable for this. Accreditions And Affliations

BOHS P904 - Management and control in leisure, display, therapy and other non-industrial systems is there to provide background and an overview of the risk of Legionella infection and how it can be controlled in leisure, display, therapy and other non-industrial water systems. It is a requirement of this course that candidates have successfully completed P901- Legionella- Management and Control of Building Hot and Cold Water Services [Syllabus GM.1]. Where both P901 and P904 courses are run on subsequent days or as a combined course then this pre-requirement is waived.