506 Opera courses in Widnes

A cardiac arrest can happen to anyone, anywhere, at any time. Every second matters and this course will give you the confidence to act quickly and effectively. Most importantly, the course will also teach defibrillator operators how to perform effective CPR.

Excavator training for all levels from experienced operators to complete novice excavator training

NPORS Appointed Person Course or Training NPORS Appointed Person Lifting Operations Training is aimed at anyone who is required to plan safe systems of work using lifting equipment and to gain the NPORS Appointed Person operator card. The aim of the course is to provide candidates with underpinning knowledge to prepare them for the role and responsibility. It is recommended that prior to attending this course individuals should have some experience of working with lifting equipment, especially mobile cranes. It is important that all delegates have a good understanding of spoken and written English for the appointed person course. NPORS is an approved CSCS Partner Card Scheme, firstly providing evidence that individuals working on construction sites have the appropriate training and qualifications but more importantly for the safe operation of the appointed person. Furthermore, training criteria is based on the approved standards of the Construction leadership Council. Experienced Appointed Person Test For experienced Appointed Persons you must complete a 1 day refresher training course. For refresher training you must have held a certificate or card in the past Appointed Person Course Duration: Experienced Worker Test: 1 day refresher training, maximum of 6 candidates Novice: 5 day’s training, maximum of 6 candidates Location*: Tewkesbury or at our clients’ site nationwide Mileage and accommodation charges may apply Certification NPORS Traditional card – lasts for 5 years and is mainly accepted with housebuilders, utilities, port and marine as proof of competence OR NPORS card with CSCS logo – accepted by all major building contractor’s. The initial card is the RED trained operator card which lasts for 2 years and can be upgraded to BLUE competent operator card further to completion of relevant NVQ. CSCS Health & Safety Test If you require the NPORS Appointed Person Red operator card with the CSCS logo on then you must have completed the operatives health and safety test within the last two years. In house certificates: suitable as proof of operator competence accepted for insurance and HSE compliance. The Appointed Person Course Includes: This Appointed Person Course covers essential legislation, crane appreciation, lifting accessories, and planning lifting operations. It culminates in writing a risk assessment and method statement. Legislation LOLER, PUWER, HASAWA. Codes of practice BS7121. Roles and responsibilities of personnel involved with lifting operations. Crane appreciation, crane types, capabilities and limitations. Duty charts. Crane terminology. Documentation and certification for lifting equipment and lifting accessories. Crane stability/ground conditions. Safe Load Indicators (SLI) and Safe Working Loads (SWL). Lifting accessories. Types of accessories and use. Slinging techniques. Down rating of accessories. Sling angles. Communications. Planning a lifting operation. Writing a risk assessment (end test). Writing a method statement (end test). Appointed Person Training Available 7 days a week to suit your business requirements. VPT have a team of friendly and approachable instructors, who have a wealth of knowledge of lifting equipment and the construction industry We have our own training centre conveniently located close to the M5 junction 9, In Tewkesbury. With its own purpose-built practical training area to simulate an actual working environment for the AP Course. Our Appointed Person training and test packages are priced to be competitive. Discounts are available for multiple bookings We can send a fully qualified NPORS Appointed Person Tester to your site nationwide, to reduce the amount of time away from work Frequently Asked Questions 1. What is the NPORS Appointed Person Lifting Operations Training? This training is designed for individuals required to plan safe systems of work using lifting equipment. It provides the knowledge necessary to prepare for the role and responsibilities of an Appointed Person. 2. Who should take this course? Anyone involved in planning and managing lifting operations, especially those with prior experience with lifting equipment, should take this course. 3. What does the course cover? The course covers legislation, codes of practice, roles and responsibilities, types of cranes, duty charts, lifting accessories, risk assessment, and method statement preparation. 4. How long is the course? The course duration is 5 days for novices and 1 day for experienced individuals seeking a refresher. 5. What certification do I receive upon completion? Participants receive an NPORS Appointed Person operator card, valid for 5 years or an NPORS card with CSCS logo. 6. Are there any prerequisites? Candidates should have a good understanding of English. For the NPORS card with CSCS logo, a CSCS Health & Safety test must have been completed within the last two years. Our more courses: Polish your abilities with our dedicated Lift Supervision Training, Slinger Signaller Training, Telehandler Training, Cat & Genny Training, Plant Loader Securer, Ride-On Road Roller, Abrasive Wheel Training, Lorry Loader Training and Scissor Lift Training sessions. Learn the safe and effective operation of these vital machines, crucial for construction and maintenance tasks. Elevate your skills and career prospects by enrolling in our comprehensive courses today.

The core principles gained from this course will help delegates have a better understanding of how to manage the relationships between sales and marketing stakeholders on the demand side and the manufacturing and other operational stakeholders on the supply side. PARTICIPANTS WILL LEARN HOW TO: • Take a different perspective on traditional data such as sales history and forecasts, as well as time-phased inventory projections and production capacity. • Recognise how their forecasts impact manufacturing schedules and inventory levels. • Assess whether they are producing enough products to meet sales demand. • Recognise how production is tied to finance and see the financial impact of production decisions, so appropriate adjustments may be then undertaken. COURSE TOPICS INCLUDE: What is S&OP? – Introduction – Definition and benefits S&OP processes – What information is required? – The stages of the S&OP process (including inputs & outputs) The integration of S&OP into a business – Critical success factors for an effective implementation – Typical roles and responsibility matrix

Transport Compliance, Audits, Health and Safety, HGV compliance, PSV compliance, Compliance, Templates, Toolbox Talk, Professional Development, Assistance, Operator Licence assistance,

Instructor training enables companies to have their own AITT Forklift Instructor. On completion they are able to instruct and examine operators on company premises. Also it could be an opportunity for an individual to embark upon a rewarding career as a recognised AITT instructor. The course complies with the approved code of practice issued by the Health & Safety Executive. We offer the AITT Instructor training course at our training centre in Warrington, Cheshire. We use all the best tools and equipment to assist trainee development. Our Instructor’s Mike Hammett and Stephen McCann have a lot of experience in this course, both have very good success rates and offer alot of after care too! Once an Instructor has passed their AITT Instructor training course they can always come back and receive professional advice. We always go the extra mile! AITT Accredited Novice Course: The Instructor training course caters for candidates seeking to become an AITT Registered Instructor. Previous fork lift experience is strongly recommended and candidates must have a current counterbalance certificate dated within 36 months prior to the course start date. Refresher courses are available prior to the instructor course extending the duration by one day to 11 days. Objectives: On successful completion of the course the candidate will be qualified to teach and train on all Industrial Counterbalance and Reach trucks for which they are certificated to use as operators. Target Group: The employer should carefully select the correct person for the job as an instructor. They should be literate and numerate with good presentation skills. The AITT recommend that candidates have a minimum of 12 months operating experience before attending the course. During the course candidates will be progressively assessed in all key areas. Candidates therefore must have a good knowledge of each subject and are provided with some excellent materials to assist them on completion of the course. AITT Instructor Training Course Duration: 3 or 5 days for Re-qualification or Re-Registration courses. 5 days for Assimilation Courses. 10-12 days for the Novice AITT instructor training course. Contents: Principles of instruction. Instructional techniques. HASAWA 1974/PUWER 1998/LOLER 1998/L117. Setting up courses. Administering the tests etc. All original documentation supplied by examining body and HSE. Prices are available on request and should you require any further information please do not hesitate to contact us. We also offer In-House Instructor training to suit companies needs and these are of five day durations, please contact for further details. Please feel free to download our Course Syllabus’s below and decide which course best meets your needs. See Mike at work demonstrating a lesson of De-stacking from High Level. In-House Courses: These courses are aimed at companies wishing to use their own Instructors to train staff. IN-HOUSE BASIC INSTRUCTOR COURSE PDF AITT Instructor Training Courses: On completion of these courses candidates will be registered as an AITT Instructor and be able to train on anything they are currently qualified to operate. Courses vary depending on experience and current qualifications so please have a look at the following courses to see which suits best. More information is available at www.aitt.co.uk.

Carried out by qualified instructors, the Manual Handling Training course is designed to cover a number of Manual Handling topics. It will enable the candidate on completion to recognise a manual handling problem. It will give them the tools to be able to initiate a risk assessment and lift or carry in a safe manner. We can deliver these courses in-house or to gain Qualsafe certification. Fully Qualified and Highly Experienced Instructors. Half day course (2-3 Hours). Our courses include the following subject areas: The requirements of the Manual Handling Operations Regulations. The legal requirements to provide Manual Handling Training. Principles of good movement. The anatomy of the spine. Manual Handling related injuries. Mechanics of incorrect and correct manual handling techniques. Practical exercises. Principles of manual handling techniques will include: The task. The load. The working environment. The individual capability. Practical applications of lifting, pushing, pulling and carrying. Risk Assessment and its practical application. There is a Maximum of up to 20 Candidates per Manual Handling training course, however we can run two courses per day with one manual handling instructor. We also have more manual handling instructors available, if it is required. This means we can run courses simultaneously should the facilities be available to do so. The course information is based on the Manual Handling Operations Regulations 1992, amended 2002. It is also covered under the Health and Safety at Work Act 1974. At MHA Training we like to make our Manual Handling Training courses fun and use the best training aids available whilst also covering the serious points of the subject. MHA Training was established in 2008 based at our training centre in Warrington, Cheshire. We provide a wide range of services On-Site also for clients around the North West in areas such as Manchester, Liverpool, Widnes, St Helens, Runcorn, Wigan, Preston and Leeds. Over the years we have expanded and have instructors available for all of our courses Nationwide.

This course aims to increase and enhance delegates’ understanding of the various financial crime threats which impact upon the organisations, sectors and regions in which they operate and provide them with the tools to mitigate those threats. It assumes no prior knowledge of the subject but ensures through a high level of interactivity that delegates with any level of experience in the field will be able to share and receive the collective knowledge of the group.

This course aims to increase and enhance delegates’ understanding of the various cyber threats which impact upon them and the organisations, sectors and regions in which they operate and provide them with the tools necessary to mitigate those threats at both a personal and organisational level. It assumes no prior knowledge of the subject but ensures through a high level of interactivity that delegates with any level of experience in the field will be able share and receive the collective knowledge of the group.

Overview Internal auditing is an independent and objective activity to evaluate an organisation's internal operations. You'll learn how to initiate an audit, prepare and conduct audit activities, compile and distribute audit reports and complete follow-up activities. It is very important for the organisation to have a smooth flow of accounting as it plays a very important role in the development of the organisation. Financial Managers or any person who deals with Accounts need to see that the company accounts are very updated and are free from any risks that can become a problem during the time of Auditing.  Objectives   By the end of the course, participants will be able to: Efficiently dealing with senior leaders with confidence Effective Contribution and Strategically Analysing and Auditing towards business success Analysing and Evaluating as an effective internal audit leader How to manage key relationships with the audit committee Practical methods for managing the audit committee and senior management Describing the significance to help maximize the contribution to their organization