14030 Open courses

Launch your Detailing Career Combining two of our syllabus levels into a 5-day period, this course has been specially created to accommodate those travelling from further afield, and international detailer training. UK Detailing Academy's recommended syllabus path remains that structured learning over a longer period remains the most effective way to deliver vocational education. It's the reason we disagree with supposed one-week 'master detailer' courses in principle, there's just too much information in a short space of time. However, we recognise that, for some, the logistical challenges can be both burdensome and financially off-putting. With that in mind, we have taken the decision to introduce an allowance to book Levels One and Two of our detailer syllabus back to back for those travelling long distances to attend. Attendees will still need to complete the coursework and take the online exams for both levels in order to achieve our certification. For more information on the syllabus of both courses, please read through the full course description below. Notes: Mondays are the only start day available online as this is a 5-day course. If you need to start on another day due to travel and run over into the following week, please contact us to discuss. To book this course using Paypal Credit, please contact the office as it exceeds the advertised maximum payment limit, which we can then negotiate. Combining two of our syllabus levels into a 5-day period, this course has been specially listed to accommodate those travelling from further afield and international detailer training. UK Detailing Academy's recommended syllabus path remains that structured learning over a longer period remains the most effective way to deliver vocational education. It's the reason we disagree with supposed 5-day 'master detailer' courses in principle. However, we recognise that for some the logistical challenges can be both burdensome and financially off-putting. With that in mind, we have taken the decision to introduce an allowance to book Levels One and Two of our detailer syllabus back to back for those travelling long distances to attend. Attendees will still need to complete the coursework and take the online exams for both levels in order to achieve our certification.   The aim of Level One is ideal for those just about to, or have recently entered the detailing industry, or those who wish to reset and refresh their skills. the aim is to familiarise the candidate with the processes and maintenance of vehicles from a professional and business view, teaching the foundations of correct vehicle cleaning up to the final familiarisation of entry-level dual action machine polishers. Business practices and health and safety are explored covering areas such as pricing, marketing, SDS and environmental conformity. Along the way topics covered will be: Washing stages Wash media Environmental considerations Drying methods Bonded contamination and its removal Wheel care and maintenance Glass and hard surfaces Engine bay cleaning Vulnerable surfaces Efficiency and process PPE and safety Clothing and working practices Risk assessment Chemical knowledge Van set-ups Interior detailing Leather and soft surface care Fillers/glazing Dual action machine polishers intro Minor defect identification Paint types LSPs Final presentation Marketing Conflict resolution and customer care Financing Insurance Pricing and quotes Business Administration Memberships Social Media Manual handling Safe working practices Pre-work inspection Level 2 Following your introduction skills learnt in Level One you will be progressing onto more advanced machine polishing and cleaning techniques. Machines introduced at this level include forced rotation dual action polishers, every inception of Dual action polishers, both in throw and size. We'll also look at pad types, heavy cutting options and defect identification to assess what can be rectified and how. Interiors are explored in greater depth with higher yield services with dry steam cleaning, odour removal, leather protection and treatment, and stain removal with the associated chemistry. • Pad types • Compound grades • Rubber and plastic protection • Coatings after-care • Polymer and PTFE exterior LSPs • Glass sealants • Troubleshooting • Accreditations • Financial management • Insurance • Marketing • Pricing • Spot Sanding • Targeting your customer base • Safe working practice • Workshop planning • Intermediate chemical knowledge • Efficiency and time management • Matt finishes • Environmental considerations • Advanced cleaner chemistry • Bonded overspray and concrete • LSPs • Engine bay detailing • Plastic trim restoration • Odour removal • Steam cleaning • Stain removal & chemical principles • Fabric and leather protection • Paint types and their principles • Long and short throw DA machines • Forced action machines • Lighting • Defect identification All levels are accompanied by a full course booklet to revisit topics covered when needed. Practical assessment takes place as part of the original training session, at the end of the course you will be assigned a (manageable) series of case studies and exercises to complete over the period of 3 months to cement the knowledge. There is then an externally assessed online exam, to ensure there are no weaker/problem areas and to assess the candidate's knowledge. After which the Level One and Two accreditations are awarded and you can either progress or choose to practice the skills gained with ongoing support. We would again stress that, if able to attend both courses separately, candidates are likely to better retain the information delivered. However, if logistics are a challenge, then this is the ideal course to get your detailing career started.   Course Length 3 Days (0930 - 1600) Group Size One-to-One Location UK Detailing Academy, 2 Purlieus Barn, Ewen, Cirencester, GL7 6BY Experience / Qualification Open to all Refreshments or Lunch Refreshments included

Aftereffects face to face training customised and bespoke.

A day packed with enthusiast detailer training and advice. The perfect course for detailing enthusiasts who have a passion for keeping their cherished vehicles in peak cosmetic condition, and who want to further their knowledge of detailing. The perfect course for car care enthusiasts who have a passion for keeping their cherished vehicles in peak cosmetic condition, and who want to further their knowledge of detailing. The course will guide the attendee through best practice processes of safe pressure & hand washing, decontamination, inspection, paint protection, mild paint correction and discuss/apply the various protection options on offer. Course Details: • Assessment of vehicle exterior & interior inspection. • Cleaning, decontamination & preparatory work of the vehicle body: Washing processes, Pre-wash & snow foam, multi bucket methods, acids and alkalis, fallout removers and in-depth cleaning practices. • Cleaning, decontamination & preparatory work of alloy wheels. • Paintwork inspection using lighting techniques, depth gauges, and visual cues. Identifying areas of concern and how to address them. • Practical overview of machine polisher ranges and their usage. • Practical overview of various polishing compounds and pad combinations. • Paintwork and alloy wheel sealant protection options and application technique. • Glass cleansing and protection practical overview. • Detailing tips and tricks to give you the best results. You will have hands-on experience starting from the very beginning and working your way through all steps of a full enhancement detail, it will then be up to you to build on the knowledge you have gained by practising on your own vehicle, with ongoing support. The course is run from our fully equipped studio in the heart of Gloucestershire, with easy access to the M4/M5, and under an hour and a half to the M25. Course Length 1 Day (0930-1600) Group Size One-to-One Location UK Detailing Academy, 2 Purlieus Barn, Ewen, Cirencester, GL7 6BY Experience / Qualification Open to all Refreshments or Lunch Refreshments included

Curious about the world around you? Our IGCSE Chemistry online study programme provides a fascinating journey through the very fabric of existence. Understand why ice floats, why leaves change their colour, and the reason behind the saltiness of the sea. Our course empowers you to unlock the answers to these questions and much more! Brimming with dynamic content and scientific challenges, this course sharpens your analytical thinking and fosters a deep understanding of various topics, from the structure of atoms to the mechanics of fuel production. 💡 This programme is an excellent choice for those looking towards careers in health and clinical professions such as medicine, veterinary science, nursing, dentistry, or forensic science. Teaming this course with complementary GCSEs can pave the way for your A-level studies or university education.  Tailor-made for online study, our course adheres to the new Edexcel IGCSE Chemistry syllabus and provides flexibility in your learning journey. With unlimited tutor support, a clear induction, and well-structured assignments, we will equip you with the skills and knowledge needed to excel in your exams. For students based in the UK, we offer guaranteed access to one of our exam centres for the final assessment. 🎓 Why Choose Us? Dynamic and engaging content, designed to the latest syllabus. Fast track option available for 2022 exams. Guaranteed exam venue through our partnership network of exam centres. Unlimited tutor support: we help you create a study plan and support you throughout your journey. Exam pass guarantee: didn't pass the first time? We'll support you till your next exam! Chemistry can be challenging, but the reward is a comprehensive scientific understanding that opens the door to numerous academic and professional pathways.  About the awarding body Awarding body: Edexcel Our course code: X804 Qualification code: 4CH1 Official Qualification Title: GCSE Chemistry Edexcel, the UK's largest awarding organisation, has been aiding individuals to achieve their goals through learning for nearly two decades. They offer a wide range of academic and vocational qualifications in both domestic and international schools, colleges, and workplaces. ⏱️ Study Hours: Expect between 120 to 150 hours of study, plus time for completing assignments. 👩‍🏫 Study Method: Delivered via our interactive online platform, our course boasts a variety of media including videos, quizzes, and engaging activities. Need printed materials? No problem, you can print them yourself! 📆 Course Duration: Register today for the course commencing on 01/09/21. Your login to MyOxbridge, our online platform, will be issued ahead of the start date. Once enrolled, enjoy unlimited tutor support for two years. 📋 Assessment: Registration for Summer 2022 examinations is open. You'll need to complete two IGCSE standard written exams, a mixture of multiple-choice questions, short-answer questions, calculations, and extended open-response questions. We also offer guaranteed exam spaces at our UK centres. Throughout your course, complete various assignments for feedback, helping you monitor your progress. 👩‍🎓 Course Outcomes: Upon successful completion, you will earn an IGCSE in Chemistry, issued by Edexcel, designed specifically for distance learning. ℹ️ Additional Information: This course has a Level 2 difficulty. There are no formal entry requirements; however, we recommend an intermediate ability to read and write in English. Course Content: - Principles of Chemistry: Explore the states of matter, atomic structures, the periodic table, electrolysis, and different types of bonding. - Inorganic Chemistry: Learn about alkali metals, atmospheric gases, metal extraction from compounds, acid-base reactions, and identifying gases and anions. - Physical Chemistry: Understand endothermic and exothermic reactions, calculate energy changes, explore rates of reaction, reversible reactions, and equilibria. - Organic Chemistry: Delve into organic chemistry, study crude oil and fractional distillation, and learn about the reactions of organic compounds like alkanes, alkenes, and alcohols.

NPORS Lorry Loader (N107)

This intensive week of skills practice, feedback and ongoing assessment is the final stage before becoming a fully-qualified human givens practitioner Dates: Mon 6th – Fri 10th Feb 2023Mon 26th – Fri 30th June 2023 Length: 5 days (9.00am – 5.30pm) Tutors: Dr Gareth Hughes, Jo Baker, Rosalind Townsend, Carol Harper Open to: Graduates of Part 2 of the Human Givens Diploma Qualification: Human Givens Practitioner Level Diploma (HG.Dip.P.) This week far exceeded my expectations – I can’t wait to get back and apply what I’ve learntJOHN BUCHANBERGER Part 3 is the Human Givens Practitioner Qualification; the pre-requisite to becoming a fully qualified human givens therapist, eligible for inclusion on the HGI’s Professional Register (which is independently accredited in the UK by the Professional Standards Authority for Health and Social Care). Throughout the week, students practise and demonstrate a broad range of practical therapeutic skills under close supervision and rigorous on-going assessment by the two tutors and experienced facilitators. Students who have already successfully graduated from the course enthuse about how useful and enriching it is. Between Part 2 and Part 3 of the Diploma students are expected to carry out extensive therapeutic practice, with a minimum of 10 different people, under ongoing supervision. For more information, please read the following downloads. Course Dates All Part 3 weeks are held at Engineers’ House in Bristol Winter 2023 – Code WK14 Mon 6th–Fri 10th February 2023 – FULL Summer 2023 – Code WK15 Mon 26th–Fri 30th June 2023 – Full, with waiting list Autumn 2023 – Code WK16 Mon 20th–Fri 24th November 2023 – Waiting list, please contact the office HOW TO APPLY: To attend Part 3, your supervisor must be happy that you have gained enough therapeutic experience and are ready to progress with this part of the Diploma. As there are only 12 places on each Part 3, we recommend you contact us as soon as possible to let us know which course you and your supervisor think you will be most likely to attend. Your name will then be added to the list for that course (for more information on this stage of the Diploma, see: Working towards Part 3). Please contact Fiona Heffernan if you have any questions about the course, or are ready to put your name down for a place on one. Meet your tutors Carol Harper Carol has 30 years’ experience in private practice, her holistic outlook and curiosity has influenced her professional development… Read more Dr Gareth Hughes Gareth is an HG psychotherapist, researcher, nationally recognised expert on university mental health and wellbeing and a Principal Fellow of the Higher Education Academy. Read more Jo Baker For many years Jo worked as a therapist within the Psychological Wellbeing department at the University of Derby, where she dealt with an extensive and varied caseload… Read more Rosalind Townsend Ros Townsend is an experienced psychotherapist and supervisor with busy practices in SW England, where she combines private therapy work with referrals from Occupational Health and the NHS. Read more

QA Level 3 Award In First Aid At Work (RQF) This page is here if you'd like us to run this course for you and your people, at our venue or yours (within 45 minute drive from Chesterfield, Derbyshire). If you'd like us to run this course for you and you're further away, please contact us direct for a quote.   If, instead, you're interested in an open/public course, please go here. Three-day course Gives learners the knowledge and skills to be a first aider Recommended by HSE for high risk workplaces Course Contents: The Roles and Responsibilities of an Emergency First Aider Assessing an Incident Minor Injuries Cuts, Grazes and Bruises Minor Burns and Scalds Managing an Unresponsive Casualty CPR Safe Use of an AED (Automated External Defibrillator) Choking Seizures Wounds and Bleeding Shock Eye Injuries Angina Heart Attack Stroke Asthma Diabetes Anaphylaxis Head Injuries Spinal Injuries Chest Injuries Fractures Sprains, Strains and Dislocations Poisoning Benefits of this course: 1.1 million workers in Britain had an accident at work in 2014/2015 Of those, 2,700 were from the East Midlands On average, one out of every 370 people received an injury at work The estimated cost of injuries and ill health last year was £15 billion The Health and Safety (First Aid) Regulations 1981 require all employers to make arrangements to ensure their employees receive immediate attention if they are injured or taken ill at work. This includes carrying out a risk assessment, appointing a suitable amount of first aiders and providing adequate first aid training Typically, first aiders will hold a valid certificate in either First Aid at Work (FAW) or Emergency First Aid at Work (EFAW) Our QA Level 3 Award in First Aid at Work (RQF) - FAW - training course is the one recommended for first aiders in a high risk workplace Having the correct first aid provision in the workplace is not just a legal requirement, it is incredibly important for the safety of all members of staff! As this is a Regulated Qualification, employers can book this course for their employees in the safe knowledge that they have fulfilled their legal responsibilities for providing quality first aid training, without having to undertake any lengthy due diligence checks Accredited, Ofqual regulated qualification: Our First Aid at Work (FAW) course is a nationally recognised, Ofqual regulated qualification accredited by Qualsafe Awards.This means that you can be rest assured that your First Aid at Work Certificate fulfills the legal requirements and is a very good way to make sure you and your employees are trained in First Aid, having the ability to save lives should the situation occur.The Ofqual Register number for this course is 603/2384/X

About this Virtual Instructor Led Training (VILT) This course will provide a comprehensive, foundational content for a wide range of topics in power system operation and control. With the growing importance of grid integration of renewables and the interest in smart grid technologies, it is more important than ever to understand the fundamentals that underpin electrical power systems. This course provides a thorough understanding of all basic terminology and concepts of electrical systems, structure of a power system, transmission line parameters, insulators, high-voltage direct current transmission, substation and neutral grounding, distribution system, circuit breakers, relaying and protection, power system stability, economic operation of power systems, load frequency control, voltage and reactive power control, renewable energy sources, restructuring of electrical power systems, and smart grids. This course is a MUST for practitioners, consultants, engineers of all disciplines, managers, technicians and all technical personnel who need to learn about electrical power systems. Training Objectives Basic Terminology and Concepts of Electrical Systems: Gain an understanding of the basic terminology and concepts of electrical systems and the structure of a power system Transmission Line Parameters: Learn in detail all the transmission line parameters including line resistance, line inductance, transposition of transmission lines, and capacitance of transmission lines Insulators: Understand thoroughly all the various types of insulators, pin type insulators, suspension type or disc insulators, strain insulators, and testing of insulators High-Voltage Direct Current Transmission: Determine the advantages and disadvantages of high voltage direct current transmission, and gain an understanding of all the features of high-voltage direct current transmission Substations and Neutral Grounding: Gain a detailed understanding of all substation equipment, factors governing the layout of substations, station transformers, elements to be earthed in a substation, power system earthing, earthing transformers, bus bar arrangements and gas-insulated substations Distribution System: Learn about the effects of voltage on the conductor volume, distributor fed from one end, distributors fed from both ends at the same voltage, distributors fed from both ends at different voltages, and alternating current distribution Circuit Breakers: Learn about the classification of circuit breakers, plain-break oil circuit breakers, air break circuit breaker, air blast circuit breakers, vacuum circuit breakers, SF6 circuit breakers, rating and testing of circuit breakers Relaying and Protection: Learn all the requirements of relaying, zones of protection, primary and backup protection, classification of relays, electromagnetic relays, induction relays, feeder protection, phase fault protection, reactance relay, static overcurrent relay, differential protection, transformer protection, Buchholz relays, alternator protection restricted earth fault protection, rotor earth fault protection, and negative-sequence protection Economic Operation of Power Systems: Gain an understanding of steam power plants, heat rate characteristics and characteristics of hydro plants Load Frequency Control: Learn about speed governing mechanism, speed governor, steady state speed regulations and adjustment of governor characteristics Voltage and Reactive Power Control: Gain an understanding of impedance and reactive power, system voltage and reactive power, voltage regulation and power transfer Renewable Energy Sources: Learn about solar power, wind power, geothermal energy, biomass and tidal power Restructuring of Electrical Power Systems: Gain an understanding of smart grids, smart grid components, smart grid benefits, and open smart grid protocol Target Audience Engineers of all disciplines Managers Technicians Maintenance personnel Other technical individuals Course Level Basic or Foundation Training Methods The VILT will be delivered online in 5 half-day sessions comprising 4 hours per day, with 2 x 10 minutes break per day, including time for lectures, discussion, quizzes and short classroom exercises. Additionally, some self-study will be requested. Participants are invited but not obliged to bring a short presentation (10 mins max) on a practical problem they encountered in their work. This will then be explained and discussed during the VILT. A short test or quiz will be held at the end the course. The instructor relies on a highly interactive training method to enhance the learning process. This method ensures that all the delegates gain a complete understanding of all the topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization. Each delegate will receive a copy of the following materials written by the instructor: 'ELECTRICAL EQUIPMENT HANDBOOK' published by McGraw-Hill in 2003 (600 pages) Introduction to Power Systems Manual (500 pages) Trainer Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him; Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011. Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003. Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012. Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999). Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999). Furthermore, he has received the following awards: The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016 The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996). The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East). Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983). Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada. POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information about post training coaching support and fees applicable for this. Accreditions And Affliations

Discover EnergyEdge's course for decision-based geothermal field development. Unlock your potential and excel in this dynamic industry.

Get that perfect freshly detailed car shot. Ready to hang on a wall, add to a portfolio, or place in a vehicle history folder - car photography is an art form in itself. Join UKDA's photography guru for a day with your detailed pride and joy and learn how to set up, take and process stunning car art for your own enjoyment or as a car photography business.   Note. This course requires confirmation of booking due to calendar restrictions. Please select your preferred date and checkout as normal, we will book and process payment once we have confirmed availability. Getting that perfect shot of a freshly detailed car - ready to hang on a wall, add to a portfolio, or place in a vehicle history folder - is an art form in itself. Join UKDA's photography guru for a day with your detailed pride and joy. The day is primarily designed for those with dedicated cameras such as DSLR or Mirrorless (as opposed to mobile phone cameras), but includes post-production and composition principles that are useful for all forms of photography. The day starts with a back-to-basics look at the principles of photography, with a hands-on approach to make your camera's manual mode feel like second nature. We then move on to different types of lenses and filters and how they can be used to the best effect. We briefly look at lighting and using flash before focusing on different types of automotive photography. In the afternoon we will head out to a different location, and after some time to prepare your vehicles, we will start putting the principles into practice, so you will have some awesome shots by the end of the day. For this course, you will need to bring your camera, fully charged and with an appropriate memory card. Outdoor clothing would also be sensible. Course Length 1 Day (0930-1600) Location UK Detailing Academy, 2 Purlieus Barn, Ewen, Cirencester, GL7 6BY Experience / Qualification Open to all Refreshments or Lunch Refreshments included Group Size One-to-One