<div id="course-pills-1">Duration<p>4 Days</p><p>24 CPD hours</p>This course is intended for<p>This course benefits individuals responsible for implementing, monitoring, and troubleshooting Juniper security components.</p>Overview<p>After successfully completing this course, you should be able to:<br />Demonstrate understanding of concepts covered in the prerequisite Juniper Security courses.<br />Describe the various forms of security supported by the Junos OS.<br />Describe the Juniper Connected Security model.<br />Describe Junos security handling at Layer 2 versus Layer 3.<br />Implement next generation Layer 2 security features.<br />Demonstrate understanding of Logical Systems (LSYS).<br />Demonstrate understanding of Tenant Systems (TSYS).<br />Implement virtual routing instances in a security setting.<br />Describe and configure route sharing between routing instances using logical tunnel interfaces.<br />Describe and discuss Juniper ATP and its function in the network.<br />Describe and implement Juniper Connected Security with Policy Enforcer in a network.<br />Describe firewall filters use on a security device.<br />Implement firewall filters to route traffic.<br />Explain how to troubleshoot zone problems.<br />Describe the tools available to troubleshoot SRX Series devices.<br />Describe and implement IPsec VPN in a hub-and-spoke model.<br />Describe the PKI infrastructure.<br />Implement certificates to build an ADVPN network.<br />Describe using NAT, CoS and routing protocols over IPsec VPNs.<br />Implement NAT and routing protocols over an IPsec VPN.<br />Describe the logs and troubleshooting methodologies to fix IPsec VPNs.<br />Implement working IPsec VPNs when given configuration that are broken.<br />Describe Incident Reporting with Juniper ATP On-Prem device.<br />Configure mitigation response to prevent spread of malware.<br />Explain SecIntel uses and when to use them.<br />Describe the systems that work with SecIntel.<br />Describe and implement advanced NAT options on the SRX Series devices.<br />Explain DNS doctoring and when to use it.<br />Describe NAT troubleshooting logs and techniques.</p><p>This four-day course, designed to build off the current Juniper Security (JSEC) offering, delves deeper into Junos security, next-generation security features, and ATP supporting software.</p></div><div id="course-pills-2"><h4>Chapter 1: Course Introduction</h4><ul><li>Course Introduction</li></ul><h4>Chapter 2: Junos Layer 2 Packet Handling and Security Features</h4><ul><li>Transparent Mode Security</li><li>Secure Wire</li><li>Layer 2 Next Generation Ethernet Switching</li><li>MACsec</li><li>Lab 1: Implementing Layer 2 Security</li></ul><h4>Chapter 3: Firewall Filters</h4><ul><li>Using Firewall Filters to Troubleshoot</li><li>Routing Instances</li><li>Filter-Based Forwarding</li><li>Lab 2: Implementing Firewall Filters</li></ul><h4>Chapter 4: Troubleshooting Zones and Policies</h4><ul><li>General Troubleshooting for Junos Devices</li><li>Troubleshooting Tools</li><li>Troubleshooting Zones and Policies</li><li>Zone and Policy Case Studies</li><li>Lab 3: Troubleshooting Zones and Policies</li></ul><h4>Chapter 5: Hub-and-Spoke VPN</h4><ul><li>Overview</li><li>Configuration and Monitoring</li><li>Lab 4: Implementing Hub-and-Spoke VPNs</li></ul><h4>Chapter 6: Advanced NAT</h4><ul><li>Configuring Persistent NAT</li><li>Demonstrate DNS doctoring</li><li>Configure IPv6 NAT operations</li><li>Troubleshooting NAT</li><li>Lab 5: Implementing Advanced NAT Features</li></ul><h4>Chapter 7: Logical and Tenant Systems</h4><ul><li>Overview</li><li>Administrative Roles</li><li>Differences Between LSYS and TSYS</li><li>Configuring LSYS</li><li>Configuring TSYS</li><li>Lab 6: Implementing TSYS</li></ul><h4>Chapter 8: PKI and ADVPNs</h4><ul><li>PKI Overview</li><li>PKI Configuration</li><li>ADVPN Overview</li><li>ADVPN Configuration and Monitoring</li><li>Lab 7: Implementing ADVPNs</li></ul><h4>Chapter 9: Advanced IPsec</h4><ul><li>NAT with IPsec</li><li>Class of Service with IPsec</li><li>Best Practices</li><li>Routing OSPF over VPNs</li><li>Lab 8: Implementing Advanced IPsec Solutions</li></ul><h4>Chapter 10: Troubleshooting IPsec</h4><ul><li>IPsec Troubleshooting Overview</li><li>Troubleshooting IKE Phase 1 and 2</li><li>IPsec Logging</li><li>IPsec Case Studies</li><li>Lab 9: Troubleshooting IPsec</li></ul><h4>Chapter 11: Juniper Connected Security</h4><ul><li>Security Models</li><li>Enforcement on Every Network Device</li></ul><h4>Chapter 12: SecIntel</h4><ul><li>Security Feed</li><li>Encrypted Traffic Analysis</li><li>Use Cases for SecIntel</li><li>Lab 10: Implementing SecIntel</li><li></li></ul><h4>Chapter 13:Advanced Juniper ATP On-Prem</h4><ul><li>Collectors</li><li>Private Mode</li><li>Incident Response</li><li>Deployment Models</li><li>Lab 11: Implementing Advanced ATP On-Prem</li></ul><h4>Chapter 14: Automated Threat Mitigation</h4><ul><li>Identify and Mitigate Malware Threats</li><li>Automate Security Mitigation</li><li>Lab 12: Identifying and Mitigation of Threats</li></ul></div><div id="course-pills-3"><h4>Additional course details:</h4><br /><p>Nexus Humans AJSEC - Advanced Junos Security training program is a workshop that presents an invigorating mix of sessions, lessons, and masterclasses meticulously crafted to propel your learning expedition forward. </p><p></p> This immersive bootcamp-style experience boasts interactive lectures, hands-on labs, and collaborative hackathons, all strategically designed to fortify fundamental concepts. <p></p>Guided by seasoned coaches, each session offers priceless insights and practical skills crucial for honing your expertise. Whether you're stepping into the realm of professional skills or a seasoned professional, this comprehensive course ensures you're equipped with the knowledge and prowess necessary for success.  <p></p>While we feel this is the best course for the AJSEC - Advanced Junos Security course and one of our Top 10 we encourage you to read the course outline to make sure it is the right content for you.  <p></p>Additionally, private sessions, closed classes or dedicated events are available both live online and at our training centres in Dublin and London, as well as at your offices anywhere in the UK, Ireland or across EMEA.<p></p></div>

Nexus Human

Juniper

IT Security

Basic Security Training (BST)

CompTIA Network+

Network & Security

CompTIA Security+

AJSEC - Advanced Junos Security

<div id="course-pills-1">Duration<p>3 Days</p><p>18 CPD hours</p>This course is intended for<p>This course is intended for network administrators, operators, and engineers responsible for managing the normal day-to-day operation and administration of BIG-IP Access Policy Manager</p>Overview<p>This course provides the skills to create and manage BIG-IP APM system.</p><p>This course covers three typical deployment scenarios for BIG-IP Access Policy Manager (APM) and is broken into three individual lessons. In lesson one, you learn how to configure BIG-IP APM to provide Active Directory-based authentication for a load-balanced pool of web servers. In lesson two, you learn how to create a policy that provides an SSL VPN (Network Access) resource to users, but only when they log into BIG-IP APM using a corporate-issued PC. Finally, lesson three builds on the first two lessons to create a policy that provides a dynamic landing page with both SSL VPN as well as an OWA (Portal Access) resource, but only to users with special authorization.</p></div><div id="course-pills-2"><h4>Setting Up the BIG-IP System</h4><ul><li>Introducing the BIG-IP System</li><li>Initially Setting Up the BIG-IP System</li><li>Archiving the BIG-IP Configuration</li><li>Leveraging F5 Support Resources and Tools</li><li></li></ul><h4>Configuring Web Application Access</h4><ul><li>Review of BIG-IP LTM</li><li>Introduction to the Access Policy</li><li>Web Access Application Configuration Overview</li><li>Web Application Access Configuration in Detail</li><li></li></ul><h4>Exploring the Access Policy</h4><ul><li>Navigating the Access Policy</li><li></li></ul><h4>Managing BIG-IP APM</h4><ul><li>BIG-IP APM Sessions and Access Licenses</li><li>Session Variables and sessiondump</li><li>Session Cookies</li><li>Access Policy General Purpose Agents List</li></ul><h4>Using Authentication</h4><ul><li>Introduction to Access Policy Authentication</li><li>Active Directory AAA Server</li><li>RADIUS</li><li>One-Time Password</li><li>Local User Database</li><li></li></ul><h4>Understanding Assignment Agents</h4><ul><li>List of Assignment Agents</li><li></li><li></li></ul><h4>Configuring Portal Access</h4><ul><li>Introduction to Portal Access</li><li>Portal Access Configuration Overview</li><li>Portal Access Configuration</li><li>Portal Access in Action</li><li></li><li></li></ul><h4>Configuring Network Access</h4><ul><li>Concurrent User Licensing</li><li>VPN Concepts</li><li>Network Access Configuration Overview</li><li>Network Access Configuration</li><li>Network Access in Action</li><li></li></ul><h4>Deploying Macros</h4><ul><li>Access Policy Macros</li><li>Configuring Macros</li><li>An Access Policy is a Flowchart</li><li>Access Policy Logon Agents</li><li>Configuring Logon Agents</li><li></li></ul><h4>Exploring Client-Side Checks</h4><ul><li>Client-Side Endpoint Security</li><li></li></ul><h4>Exploring Server-Side Checks</h4><ul><li>Server-Side Endpoint Security Agents List</li><li>Server-Side and Client-Side Checks Differences</li><li></li></ul><h4>Using Authorization</h4><ul><li>Active Directory Query</li><li>Active Directory Nested Groups</li><li>Configuration in Detail</li><li></li></ul><h4>Configuring AppTunnels</h4><ul><li>Application Access</li><li>Remote Desktop</li><li>Network Access Optimized Tunnels</li><li>Landing Page Bookmarks</li><li></li></ul><h4>Deploying Access Control Lists</h4><ul><li>Introduction to Access Control Lists</li><li>Configuration Overview</li><li>Dynamic ACLs</li><li>Portal Access ACLs</li><li></li></ul><h4>Signing On with SSO</h4><ul><li>Remote Desktop Single Sign-On</li><li>Portal Access Single Sign-On</li><li></li></ul><h4>Using iRules</h4><ul><li>iRules Introduction</li><li>Basic TCL Syntax</li><li>iRules and Advanced Access Policy Rules</li><li></li></ul><h4>Customizing BIG-IP APM</h4><ul><li>Customization Overview</li><li>BIG-IP Edge Client</li><li>Advanced Edit Mode Customization</li><li>Landing Page Sections</li><li></li></ul><h4>Deploying SAML</h4><ul><li>SAML Conceptual Overview</li><li>SAML Configuration Overview</li><li></li></ul><h4>Exploring Webtops and Wizards</h4><ul><li>Webtops</li><li>Wizards</li><li></li></ul><h4>Using BIG-IP Edge Client</h4><ul><li>BIG-IP Edge Client for Windows Installation</li><li>BIG-IP Edge Client in Action</li><li></li></ul><h4>Lesson</h4><ul><li>Configuration Project</li><li></li></ul><h4>Additional Training and Certification</h4><ul><li>Getting Started Series Web-Based Training</li><li>F5 Instructor Led Training Curriculum</li><li>F5 Professional Certification Program</li><li>F5 Instructor Led Training Curriculum</li><li>F5 Professional Certification Program</li><li></li></ul></div><div id="course-pills-3"><h4>Additional course details:</h4><br /><p>Nexus Humans F5 Configuring BIG-IP APM - Access Policy Manager v13.x training program is a workshop that presents an invigorating mix of sessions, lessons, and masterclasses meticulously crafted to propel your learning expedition forward. </p><p></p> This immersive bootcamp-style experience boasts interactive lectures, hands-on labs, and collaborative hackathons, all strategically designed to fortify fundamental concepts. <p></p>Guided by seasoned coaches, each session offers priceless insights and practical skills crucial for honing your expertise. Whether you're stepping into the realm of professional skills or a seasoned professional, this comprehensive course ensures you're equipped with the knowledge and prowess necessary for success.  <p></p>While we feel this is the best course for the F5 Configuring BIG-IP APM - Access Policy Manager v13.x course and one of our Top 10 we encourage you to read the course outline to make sure it is the right content for you.  <p></p>Additionally, private sessions, closed classes or dedicated events are available both live online and at our training centres in Dublin and London, as well as at your offices anywhere in the UK, Ireland or across EMEA.<p></p></div>

APMG

Application Performance Monitoring (APM)

Assessment Practising Certificate (APC)

IT Certifications

ACP (Agile Certified Practitioner)

AWS Certified Cloud Practitioner

F5 Configuring BIG-IP APM - Access Policy Manager v13.x

<div id="course-pills-1">Duration<p>5 Days</p><p>30 CPD hours</p>This course is intended for<p>The primary audience for this course is as follows                                       <br />- IT Staff and Managers<br />- Network and systems personnel and engineers<br />- Small to mid-sized organizations that require fundamental knowledge on networking terms/concepts and configuration guidance for Meraki equipment This also includes organizations looking to implement remote sites, provide a guest wireless solution, and collect user analytics</p>Overview<p>Upon completing this course, the student will be able to meet these objectives:                                         <br />Students will be able to Deploy and Manage a Meraki Network using the Meraki Dashboard<br />- Deploy, Manage, Monitor and Troubleshoot Meraki MS Switches<br />- Deploy, Manage, Monitor and Troubleshoot Meraki MR Wireless Access Points<br />- Deploy, Manage, Monitor and Troubleshoot Meraki MX Firewall Appliances<br />- Deploy, Manage, Monitor and Troubleshoot Meraki MV IP Video Cameras<br />- Deploy, Manage, Monitor and Troubleshoot Meraki MC Phones<br />- Deploy, Manage, Monitor and Troubleshoot Meraki Systems Manager<br />- Deploy, Manage, Monitor and Troubleshoot Meraki SDWAN</p><p>This course familiarizes individuals with networking concepts and demonstrates how to effectively use Meraki products to build a comprehensive network</p></div><div id="course-pills-2"><h4>Cisco/Meraki Product Line Introduction</h4><ul><li>MS - Switching</li><li>MR - Wireless LAN</li><li>MX - Security</li><li>MV ? Camera</li><li>MC - Voice</li><li>SD-WAN</li></ul><h4>Cisco/Meraki Cloud Management</h4><ul><li>Introduction to cloud management</li><li>The dashboard and navigation</li><li>Organizations &amp; Networks ? what is the difference and how to use them</li><li>System-wide parameters (organization parameters)</li></ul><h4>Cisco/Meraki Dashboard Administration</h4><ul><li>Creating and implementing maps</li><li>Summary Report and Auto Generation Reports</li><li>Adding administrators and tweaking security levels</li><li>Using Tags and Configuring Alerting (SNMP, email)</li><li>Adding admins, configuring reports, and alerts</li><li>Firmware Management</li><li>Configuring Authentication</li><li>Lab 1</li><li>Lab 2</li><li>Configuring external authentication</li><li>Configuring Group Policies</li><li>Device Replacement</li><li>Location Analytics</li><li>Other advanced analytics</li></ul><h4>Cisco/Meraki Switching</h4><ul><li>Review switching basics</li><li>Review Meraki L2 Switch Models</li><li>Configuring Meraki Switches</li><li>Troubleshooting / Diagnostics</li><li>Lab 3</li></ul><h4>Cisco/Meraki Routing</h4><ul><li>Review routing basic (IP Addresses, Networks and Masks, OSPF, etc.)</li><li>Review Meraki L3 switch Models</li><li>Configuring Meraki Switches for Routing</li><li>Lab 4</li></ul><h4>Cisco/Meraki Wireless</h4><ul><li>Review Wireless Basics</li><li>Meraki Wireless Product Review</li><li>Performing a Site Survey</li><li>Configuring Access Points</li><li>Lab 5</li></ul><h4>Cisco/Meraki Firewalls/Security</h4><ul><li>Review firewall basics</li><li>Meraki Firewall Model Review</li><li>Configuring a Meraki Firewall</li><li>Lab 6</li></ul><h4>IP Cameras</h4><ul><li>MV21 vs MV71</li><li>Installing Cameras</li><li>Adding Cameras to the Dashboard</li><li>Managing MV Cameras</li><li>Troubleshooting Cameras</li><li>Lab 7</li></ul><h4>Meraki Communications</h4><ul><li>QOS</li><li>Voice Security</li><li>Deploying Meraki MC74 Phones</li><li>Deploying Cisco IP Phones to CUCM</li><li>Deploying Voice Features</li><li>End User</li><li>Lab 8</li><li></li></ul><h4>Meraki Systems Manager</h4><ul><li>Controlling Wireless Device Policies</li><li>Enrolling Devices</li><li>Apps</li><li>Profiles</li><li>Tags</li><li>Security Policies</li><li>Geofencing Policies</li><li>Lab 9</li></ul><h4>Meraki SDWAN</h4><ul><li>What is SD-WAN?</li><li>Concentrator Mode</li><li>VPN Topology</li><li>Split Tunnel</li><li>Full Tunnel </li><li>Hub and Spoke</li><li>VPN Mesh</li><li>Datacenter Redundancy (DC-DC Failover)</li><li>Warm Spare (High Availability) for VPN concentrators</li><li>Connection Monitor</li><li>Dual-Active VPN uplinks</li><li>Policy-based Routing</li><li>Dynamic Path Selection</li><li>SD-WAN Objectives</li><li>Example Topology</li><li>High Level Traffic Flow</li><li>SD-WAN Technologies</li><li>Deploying a one-armed concentrator</li><li>Dashboard Configuration</li><li>Other Datacenter Configuration</li><li>MX IP Assignment</li><li>Upstream Considerations</li><li>Datacenter Redundancy (DC-DC Failover)</li><li>High-level architecture</li><li>Failover Times</li><li>Datacenter Deployment</li><li>Branch Deployment</li><li>Lab 10</li></ul><h4>Meraki Support</h4><ul><li>Getting support for Meraki</li><li>Finding the Right Documentation</li><li>Posting in the Community</li><li>Troubleshooting Meraki Connectivity Issues</li><li>Resetting Devices.</li></ul></div><div id="course-pills-3"><h4>Additional course details:</h4><br /><p>Nexus Humans Implementing and Configuring Meraki Technologies v1.0 (ICMT - CT) training program is a workshop that presents an invigorating mix of sessions, lessons, and masterclasses meticulously crafted to propel your learning expedition forward. </p><p></p> This immersive bootcamp-style experience boasts interactive lectures, hands-on labs, and collaborative hackathons, all strategically designed to fortify fundamental concepts. <p></p>Guided by seasoned coaches, each session offers priceless insights and practical skills crucial for honing your expertise. Whether you're stepping into the realm of professional skills or a seasoned professional, this comprehensive course ensures you're equipped with the knowledge and prowess necessary for success.  <p></p>While we feel this is the best course for the Implementing and Configuring Meraki Technologies v1.0 (ICMT - CT) course and one of our Top 10 we encourage you to read the course outline to make sure it is the right content for you.  <p></p>Additionally, private sessions, closed classes or dedicated events are available both live online and at our training centres in Dublin and London, as well as at your offices anywhere in the UK, Ireland or across EMEA.<p></p></div>

Cisco Certified Network Associate (CCNA)

Microsoft AZ-900

Cisco Certified Entry Networking Technician (CCENT)

Microsoft AZ-700

IT Networking Fundamentals

Implementing and Configuring Meraki Technologies v1.0 (ICMT - CT)

<div id="course-pills-1">Duration<p>2 Days</p><p>12 CPD hours</p>Overview<p>- You will learn advanced Adobe Captivate concepts.   - You will learn to create highly interactive software simulation and to control the text that appears in the recording?s text captions by editing Captivates text capture templates.  - You will create responsive lessons (using Fluid Boxes and Breakpoints) that automatically reflow to fit just about any kind of display including desktops, laptops, tablets, and smart phones.  - Learn new features that Captivate now supports; such as, Virtual Reality with 360-degree images and videos along with interactive videos.  - Fine-tune your Captivate production skills by leveraging object styles, master slides, themes, and advanced actions.  - Engage your learners by adding variables, widgets, and learner interactions (including drag and drop) to your eLearning.  - Learn to create object styles, apply them globally, and import and export them. Knock large projects down to size by learning to create branch groups.   - Create branching scenarios that allow learners to plot their own path through your course.   - You will also learn to create templates.  - Ensure your eLearning can be used by people with disabilities by adding such 508-compliant features as accessibility text, keyboard shortcuts, and closed captions.  - Enable Captivates reporting features and, along the way, learn about Learning Management Systems, SCORM, SCOs, Manifests, and content packages.</p><p>A course that teaches the higher-end, more advanced functionality of Adobe Captivate 2019.</p></div><div id="course-pills-2"><h3>1 - INTERACTIVE SOFTWARE SIMULATIONS AND CAPTION PRE-EDITING</h3> <ul> <li>Rehearse a Script</li> <li>Set Recording Preferences</li> <li>Record a Simulation</li> <li>Edit a Text Capture Template</li> </ul> <h3>2 - OBJECT STYLES, PROJECT SHARING, AND BRANCHING</h3> <ul> <li>Create a New Style</li> <li>Apply an Object Style Globally</li> <li>Export and Import an Object Style</li> <li>Name a Slide</li> <li>Copy/Paste Project Assets</li> <li>Use Buttons to Create a Branch</li> <li>Explore the Branching View</li> <li>Create a Branch Group</li> </ul> <h3>3 - VARIABLES AND WIDGETS</h3> <ul> <li>Add Project Information</li> <li>Insert a System Variable</li> <li>Edit a System Variable</li> <li>Create a User Variable</li> <li>Use a Variable to Gather Learner Data</li> <li>Insert and Format a Widget</li> </ul> <h3>4 - INTERACTIVE VIDEOS AND VIRTUAL REALITY</h3> <ul> <li>Insert an Interactive Video</li> <li>Add Bookmarks</li> <li>Add Slide Overlays</li> <li>Create a Virtual Reality Project</li> <li>Add a Text Hotspot</li> <li>Add an Audio Hotspot</li> <li>Add a Quiz to a Virtual Reality Project</li> </ul> <h3>5 - INTERACTIONS</h3> <ul> <li>Insert a Process Circle</li> <li>Create a Basic Drag and Drop Interaction</li> <li>Manage Drag and Drop Buttons and Write Captions</li> <li>Create a ?Trick? Retry Slide</li> <li>Explore an Advanced Drag and Drop Project</li> <li>Create an Advanced Drag and Drop Interaction</li> <li>Change the States of a Smart Shape</li> <li>Use States to Swap Images</li> </ul> <h3>6 - ACCESSIBLE ELEARNING</h3> <ul> <li>Set Document Information</li> <li>Enable Accessibility</li> <li>Add Accessibility Text to Slides</li> <li>Import Slide Audio</li> <li>Add Shortcut Keys</li> <li>Add Closed Captions</li> <li>Set a Tab Order</li> </ul> <h3>7 - ADVANCED ACTIONS</h3> <ul> <li>Use a Completed Action</li> <li>Name Objects</li> <li>Create a Mask</li> <li>Control Object Visibility</li> <li>Create a Standard Advanced Action,</li> <li>Attach an Action to a Button</li> <li>Group Timeline Objects</li> <li>Create a Variable</li> <li>Create a Conditional Action</li> <li>Create Decision Blocks</li> </ul> <h3>8 - PROJECT TEMPLATES AND MASTER SLIDES</h3> <ul> <li>Work with the Main Master Slide</li> <li>Work with Content Masters</li> <li>Apply a Master to Filmstrip Slides</li> <li>Edit a Master</li> <li>Apply a Theme</li> <li>Create a Custom Theme</li> <li>Review a Template</li> <li>Create a Project Based on a Template</li> <li>Create a Project Template</li> </ul> <h3>9 - RESPONSIVE PROJECTS</h3> <ul> <li>Customize Breakpoints</li> <li>Save a Standard Project As Responsive</li> <li>Insert and Name Fluid Boxes</li> <li>Resize Fluid Boxes</li> <li>Add Content to Fluid Boxes</li> <li>Switch Modes</li> <li>Use the Position Inspector</li> <li>Modify a Single Breakpoint</li> <li>Exclude from View</li> <li>Add a New Breakpoint</li> <li>Position and Link Objects</li> <li>Edit Breakpoint Object Styles</li> </ul> <h3>10 - REPORTING RESULTS</h3> <ul> <li>Set Quiz Reporting Options</li> <li>Create a Manifest File</li> <li>Report a Button Interaction</li> <li>Adjust Slide Object Interaction</li> <li>Preview in SCORM Cloud</li> <li>Publish a Content Package</li> <li>Create an Inquisiq LMS Account</li> <li>Create an LMS Course</li> <li>Attach a Lesson to a Course</li> <li>Test an eLearning Course</li> </ul></div><div id="course-pills-3"><h4>Additional course details:</h4><br /><p>Nexus Humans Adobe Captivate 2019 - Beyond The Essentials training program is a workshop that presents an invigorating mix of sessions, lessons, and masterclasses meticulously crafted to propel your learning expedition forward. </p><p></p> This immersive bootcamp-style experience boasts interactive lectures, hands-on labs, and collaborative hackathons, all strategically designed to fortify fundamental concepts. <p></p>Guided by seasoned coaches, each session offers priceless insights and practical skills crucial for honing your expertise. Whether you're stepping into the realm of professional skills or a seasoned professional, this comprehensive course ensures you're equipped with the knowledge and prowess necessary for success.  <p></p>While we feel this is the best course for the Adobe Captivate 2019 - Beyond The Essentials course and one of our Top 10 we encourage you to read the course outline to make sure it is the right content for you.  <p></p>Additionally, private sessions, closed classes or dedicated events are available both live online and at our training centres in Dublin and London, as well as at your offices anywhere in the UK, Ireland or across EMEA.<p></p></div>

Online Course Marketing

Online Course Creation

Adobe Animate

Adobe Captivate

Video Design

Adobe Connect

Adobe Captivate 2019 - Beyond The Essentials

<div id="course-pills-1">Duration<p>2 Days</p><p>12 CPD hours</p>This course is intended for<p>This introduction to Spring development course requires that incoming students possess solid Java programming skills and practical hands-on Java experience.  This class is geared for experienced Java developers who are new to Spring, who wish to understand how and when to use Spring in Java and JEE applications.</p>Overview<p>Working in a hands-on learning environment, led by our expert practitioner, students will:<br />Explain the issues associated with complex frameworks such as JEE and how Spring addresses those issues<br />Understand the relationships between Spring and JEE, AOP, IOC and JDBC.<br />Write applications that take advantage of the Spring container and the declarative nature of assembling simple components into applications.<br />Understand how to configure the Spring Boot framework<br />Understand and work on integrating persistence into a Spring application<br />Explain Spring's support for transactions and caching<br />Work with Spring Boot to facilitate Spring setup and configuration<br />Apply Aspect Oriented Programming (AOP) to Spring applications<br />Become familiar with the conditionally loading of bean definitions and Application Contexts<br />Understand how to leverage the power of Spring Boot<br />Use Spring Boot to create and work with JPA repositories</p><p>Introduction to Spring Boot | Spring Boot Quick Start is a hands-on Spring training course geared for experienced Java developers who need to understand what the Spring Boot is in terms of today's systems and architectures, and how to use Spring in conjunction with other technologies and frameworks. This leading-edge course provides added coverage of Spring's Aspect-Oriented Programming and the use of Spring Boot.  Students will gain hands-on experience working with Spring, using Maven for project and dependancy management, and, optionally, a test-driven approach (using JUnit) to the labs in the course. The Spring framework is an application framework that provides a lightweight container that supports the creation of simple-to-complex components in a non-invasive fashion. Spring's flexibility and transparency is congruent and supportive of incremental development and testing.  The framework's structure supports the layering of functionality such as persistence, transactions, view-oriented frameworks, and enterprise systems and capabilities.  This course targets Spring Boot 2 , which includes full support for Java SE 11 and Java EE 8. Spring supports the use of lambda expressions and method references in many of its APIs.</p></div><div id="course-pills-2"><h4>The Spring Framework</h4><ul><li>Understand the value of Spring</li><li>Explore Dependency Injection (DI) and Inversion of Control (IoC)</li><li>Introduce different ways of configuring collaborators</li><li>Spring as an Object Factory</li><li>Initializing the Spring IoC Container</li></ul><h4>Configuring Spring Managed Beans</h4><ul><li>Introduce Java-based configuration</li><li>The @Configuration and @Bean annotations</li><li>Define bean dependencies</li><li>Bootstrapping Java Config</li><li>Context Injection in Configuration classes</li><li>Using context Profiles</li><li>Conditionally loading beans and configurations</li><li>Bean Life-Cycle Methods</li></ul><h4>Defining Bean dependencies</h4><ul><li>Introduce Spring annotations for defining dependencies</li><li>Explore the @Autowired annotation</li><li>Stereotype Annotations</li><li>Qualifying injection points</li><li>Lifecycle annotations</li><li>Using properties in Java based configuration</li><li>The @Value annotation</li><li>Using the Candidate Components Index</li></ul><h4>Introduction to Spring Boot</h4><ul><li>Introduce the basics of Spring Boot</li><li>Explain auto-configuration</li><li>Introduce the Spring Initializr application</li><li>Bootstrapping a Spring Boot application</li></ul><h4>Working with Spring Boot</h4><ul><li>Provide an overview of Spring Boot</li><li>Introduce starter dependencies</li><li>Introduce auto-configuration</li><li>@Enable... annotations</li><li>Conditional configuration</li><li>Spring Boot Externalized Configuration</li><li>Bootstrapping Spring Boot</li></ul><h4>Introduction to Aspect Oriented Programming</h4><ul><li>Aspect Oriented Programming</li><li>Cross Cutting Concerns</li></ul><h4>Spring AOP</h4><ul><li>Spring AOP in a Nutshell</li><li>@AspectJ support</li><li>Spring AOP advice types</li><li>AspectJ pointcut designators</li></ul><h4>Spring Boot Actuator</h4><ul><li>Understand Spring Boot Actuators</li><li>Work with predefined Actuator endpoints</li><li>Enabling Actuator endpoints</li><li>Securing the Actuator</li></ul><h4>Developing in Spring Boot</h4><ul><li>Introduce Spring Boot Devtools</li><li>Enable the ConditionEvaluationReport</li><li>Debugging Spring Boot applications</li></ul><h4>Thymeleaf</h4><ul><li>Provide a quick overview of Thymeleaf</li><li>Introduce Thymeleaf templates</li><li>Create and run a Spring Thymeleaf MVC application</li></ul></div><div id="course-pills-3"><h4>Additional course details:</h4><br /><p>Nexus Humans Spring Boot Quick Start | Core Spring, Spring AOP, Spring Boot 2.0 and More (TT3322) training program is a workshop that presents an invigorating mix of sessions, lessons, and masterclasses meticulously crafted to propel your learning expedition forward. </p><p></p> This immersive bootcamp-style experience boasts interactive lectures, hands-on labs, and collaborative hackathons, all strategically designed to fortify fundamental concepts. <p></p>Guided by seasoned coaches, each session offers priceless insights and practical skills crucial for honing your expertise. Whether you're stepping into the realm of professional skills or a seasoned professional, this comprehensive course ensures you're equipped with the knowledge and prowess necessary for success.  <p></p>While we feel this is the best course for the Spring Boot Quick Start | Core Spring, Spring AOP, Spring Boot 2.0 and More (TT3322) course and one of our Top 10 we encourage you to read the course outline to make sure it is the right content for you.  <p></p>Additionally, private sessions, closed classes or dedicated events are available both live online and at our training centres in Dublin and London, as well as at your offices anywhere in the UK, Ireland or across EMEA.<p></p></div>

Primavera P6

Spring Framework

Trainers Course

Spring Boot Quick Start | Core Spring, Spring AOP, Spring Boot 2.0 and More (TT3322)

<div id="course-pills-1">Duration<p>3 Days</p><p>18 CPD hours</p>This course is intended for<p>Anyone who'd like to learn Adobe Premiere Pro CC<br />Those that plan to take the Adobe Certfied Expert (ACE) exam</p>Overview<p>Introduction to Premiere Pro CC will allow you to learn powerful real-time video and audio editing tools that give you precise control over virtually every aspect of your production.</p><p>In this three-day course, you?ll get a thorough overview of the interface, tools, features, and production flow for Premiere Pro CC. The course is an ideal combination of instructor-led demonstration and hands-on practice to introduce you to Adobe Premiere Pro software, a revolutionary 64-bit nonlinear video-editing application. You will learn powerful real-time video and audio editing tools that give you precise control over virtually every aspect of your production.</p></div><div id="course-pills-2"><h4>Touring Adobe Premiere Pro CC</h4><ul><li>Nonlinear editing in Adobe Premiere Pro</li><li>Expanding the workflow</li><li>Touring the Adobe Premiere Pro interface</li></ul><h4>Setting up a Project</h4><ul><li>Setting up a project</li><li>Setting up a sequence</li></ul><h4>Importing Media</h4><ul><li>Importing assets</li><li>Working with the Media Browser</li><li>Importing images</li><li>The media cache</li><li>Capturing the videotape</li></ul><h4>Organizing Media</h4><ul><li>The Project panel</li><li>Working with bins</li><li>Organizing media with content analysis</li><li>Monitoring footage</li><li>Modifying clips</li></ul><h4>Essentials of Video Editing</h4><ul><li>Using the Source Monitor</li><li>Navigating the Timeline</li><li>Essential editing commands</li></ul><h4>Working with Clips and Markers</h4><ul><li>Program Monitor controls</li><li>Controlling resolution</li><li>Using markers</li><li>Using Sync Lock and Track Lock</li><li>Finding gaps in the Timeline</li><li>Moving clips</li><li>Extracting and deleting segments</li></ul><h4>Adding Transitions</h4><ul><li>What are transitions?</li><li>Edit points and handles</li><li>Adding video transitions</li><li>Using A/B mode to fine-tune a transition</li><li>Adding audio transitions</li></ul><h4>Advanced Editing Techniques</h4><ul><li>Four-point editing</li><li>Retiming clips</li><li>Replacing clips and footage</li><li>Nesting sequences</li><li>Regular trimming</li><li>Advanced trimming</li><li>Trimming in the Program Monitor panel</li></ul><h4>Putting Clips in Motion</h4><ul><li>Adjusting the Motion effect</li><li>Changing clip position, size, and rotation</li><li>Working with keyframe interpolation</li><li>Using other motion-related effects</li></ul><h4>Multi-camera Editing</h4><ul><li>The multi-camera process</li><li>Creating a multi-camera sequence</li><li>Switching multiple cameras</li><li>Finalizing multi-camera editing</li><li>Additional multi-camera editing tips</li></ul><h4>Editing and Mixing Audio</h4><ul><li>Setting up the interface to work with audio</li><li>Examining audio characteristics</li><li>Adjusting audio volume</li><li>Adjusting audio gain</li><li>Normalizing audio</li><li>Creating a split edit</li><li>Adjusting audio levels in a sequence</li><li>Working with the Audio Mixer</li></ul><h4>Sweetening Sound</h4><ul><li>Sweetening sound with audio effects</li><li>Adjusting EQ</li><li>Applying effects in the Audio Mixer</li><li>Cleaning up noisy audio</li></ul><h4>Adding Video Effects</h4><ul><li>Working with effects</li><li>Keyframing effects</li><li>Effects presets</li><li>Frequently used effects</li></ul><h4>Color Correction and Grading</h4><ul><li>Color-oriented workflow</li><li>An overview of color-oriented effects</li><li>Fixing exposure problems</li><li>Fixing color balance</li><li>Specials color effects</li><li>Creating a look</li></ul><h4>Exploring Compositing Techniques</h4><ul><li>What is an alpha channel?</li><li>Using compositing in your projects</li><li>Working with the Opacity effect</li><li>Working with alpha-channel transparencies</li><li>Color keying a greenscreen shot</li><li>Using mattes</li></ul><h4>Creating Titles</h4><ul><li>An overview of the Titler window</li><li>Video typography essentials</li><li>Creating titles</li><li>Stylizing text</li><li>Working with shapes and logos</li><li>Making text roll and crawl</li></ul><h4>Managing Your Projects</h4><ul><li>The File menu</li><li>Using the Project Manager</li><li>Final project managment steps</li><li>Importing projects or sequences</li><li>Managing collaboration</li><li>Managing your hard drives</li></ul><h4>Exporting Frames, Clips, and Sequences</h4><ul><li>Overview of export options</li><li>Exporting single frames</li><li>Exporting a master copy</li><li>Working with Adobe Media Encoder</li><li>Exchanging with other editing applications</li><li>Recording to tape</li></ul></div><div id="course-pills-3"><h4>Additional course details:</h4><br /><p>Nexus Humans Introduction to Premiere Pro CC training program is a workshop that presents an invigorating mix of sessions, lessons, and masterclasses meticulously crafted to propel your learning expedition forward. </p><p></p> This immersive bootcamp-style experience boasts interactive lectures, hands-on labs, and collaborative hackathons, all strategically designed to fortify fundamental concepts. <p></p>Guided by seasoned coaches, each session offers priceless insights and practical skills crucial for honing your expertise. Whether you're stepping into the realm of professional skills or a seasoned professional, this comprehensive course ensures you're equipped with the knowledge and prowess necessary for success.  <p></p>While we feel this is the best course for the Introduction to Premiere Pro CC course and one of our Top 10 we encourage you to read the course outline to make sure it is the right content for you.  <p></p>Additionally, private sessions, closed classes or dedicated events are available both live online and at our training centres in Dublin and London, as well as at your offices anywhere in the UK, Ireland or across EMEA.<p></p></div>

Final Cut Pro

After Effects

Premiere Pro

Video Editing

Adobe Premiere Pro

Adobe After Effects

Introduction to Premiere Pro CC

<div id="course-pills-1">Duration<p>2 Days</p><p>12 CPD hours</p>This course is intended for<p>Executives, Project Managers, Business Analysts, Business and IT stakeholders working with analysts, Quality and process engineers, technicians, corrective action coordinators or managers; supervisors, team leaders, and process operators; anyone who wants to improve their ability to solve recurring problems.</p>Overview<p>At the completion of this course, you should be able to:Identify the different types of tools and techniques availableApply change management successfullyReview what to look for when applying business case thinking to Root Cause AnalysisDevelop a process to systematically approach problems</p><p>Problem determination skills cannot be acquired by reading a book. They mostly come from experience. After this course, you will have a general understanding of a structured problem determination approach, which you can then apply in your daily work.</p></div><div id="course-pills-2"><h4>RCA Foundation Concepts and Objectives</h4><ul><li>Section Learning Objectives </li><li>Discuss  Definitions ? IT Perspective</li><li>Discuss What is a problem and why do they exist?</li><li>Exercise 1a: Why is RCA important </li><li>What is Root Cause?</li><li>RCA Benefits and Approaches</li><li>Exercise 1b: Why are multiple approaches important?</li><li>Event and Casual Analysis</li><li>Exercise 1c: Apply Event and Causal Analysis</li><li>Event and Causal Analysis: Exercise 1c Worksheet</li><li>RCA Tools for  each approach</li><li>Exercise 1D: Prepare for Case Study</li><li>Section Summary and Conclusions</li></ul><h4>Enhance Use of RCA Tools</h4><ul><li>Why use a Particular Method</li><li>Tool: Change Analysis</li><li>Change Analysis Examples</li><li>Exercise 2a: Apply Change Analysis</li><li>Exercise 2b: Change Analysis Worksheet </li><li>Tool: How to Resolve Conflict</li><li>Tool: 5 Why?s</li><li>Example Learning Management Problem</li><li>Exercise 2b: Apply 5 Why?s Sequence-of-Events</li><li>Exercise 2b: Worksheet</li><li>Tool: Cause and Effect</li><li>Exercise 2c: Apply Cause and Effect</li><li>Exercise 2c: Cause and Effect Worksheet</li><li>Tool: Fault Tree Analysis</li><li>Why do we use Fault Tree Analysis?</li><li>How does it work?</li><li>Fault Tree Diagram Symbols</li><li>Example #1 of FTA: Car Hits Object</li><li>Exercise 2D: Apply Fault Tree Analysis</li><li>Tool: Failure Modes and Effects Analysis (FMEA)</li><li>Example: Failure Modes and Effects Analysis</li><li>Exercise 2E: Apply FMEA</li><li>Tool: Design / Application Review</li><li>Exercise 2d: Apply Design/Application Review</li><li>Section summary &amp; conclusions</li></ul><h4>Problem Resolution &amp; Prevention</h4><ul><li>Section Objectives</li><li>The Secret of Solving Problems</li><li>A Note about Statistical Control</li><li>A Note about Fire Fighting</li><li>Technique: Business Process Mapping</li><li>Example: IGOE</li><li>Exercise 3A: Problem as IGOE</li><li>Exercise 3A: IGOE Template</li><li>Technique: Lean Six Sigma and DMAIC</li><li>Lean Six Sigma Benefits</li><li>Exercise 3B: Apply Lean Six Sigma </li><li>Importance of Understanding the Business Process</li><li>The Business Process Mandate</li><li>Technique:  Process Modeling</li><li>Graphical Notation Standard (BPMN)</li><li>What is Business Process Modeling Notation (BPMN)?</li><li>Benefits of BPMN</li><li>Basic Components of BPMN</li><li>Exercise 3C: Use BPMN to Document a Current State</li><li>Technique: Business Process Maturity Model</li><li>Five Levels of Maturity</li><li>Exercise 3D: Appraise Business Process Maturity Level</li><li>Section Summary and Conclusions</li></ul><h4>Capability Improvement for RCA</h4><ul><li>Section Learning Objectives</li><li>Steps in Disciplined Problem Solving</li><li>RCA as a RCA Process</li><li>Key RCA Role Considerations</li><li>Exercise 4A: Apply RCA to RCA Process</li><li>Sustainable RCA Improvement</li><li>Organizational Units</li><li>Process Area Goals, Practices</li><li>Specific and General Practices </li><li>Specific Practice Examples</li><li>Software Maturity Survey</li><li>Exercise 4B: Apply Strengths, Weakness, Opportunities and Threats (SWOT) to RCA</li><li>SWOT Analysis Worksheet</li><li>Recognize the importance of the Change Management component in your RCA implementation</li><li>Using the ADKAR Model to Communicate Change</li><li>Review ADKARÂ© Model ? </li><li>Awareness of the need for change</li><li>Desire to participate and support the change</li><li>Knowledge on how to change</li><li>Ability to implement required skills and behaviors</li><li>Reinforcement to sustain the change</li><li>Exercise 4C: Create an Ability Checklist</li><li>The ADKAR Model: Reinforcement</li><li>Exercise 4D: Find two examples of how ADKAR will be different</li><li>Section Summary and Conclusions</li></ul><h4>Course Summary &amp; Conclusions</h4><ul><li>Plan the Proposal and Business Case</li><li>Example: 1 Page Business Case</li><li>Exercise 5A: Creating Action Plans</li><li>Resource Guide</li><li>Questions</li></ul></div><div id="course-pills-3"><h4>Additional course details:</h4><br /><p>Nexus Humans BA17 - Advanced Root Cause Analysis training program is a workshop that presents an invigorating mix of sessions, lessons, and masterclasses meticulously crafted to propel your learning expedition forward. </p><p></p> This immersive bootcamp-style experience boasts interactive lectures, hands-on labs, and collaborative hackathons, all strategically designed to fortify fundamental concepts. <p></p>Guided by seasoned coaches, each session offers priceless insights and practical skills crucial for honing your expertise. Whether you're stepping into the realm of professional skills or a seasoned professional, this comprehensive course ensures you're equipped with the knowledge and prowess necessary for success.  <p></p>While we feel this is the best course for the BA17 - Advanced Root Cause Analysis course and one of our Top 10 we encourage you to read the course outline to make sure it is the right content for you.  <p></p>Additionally, private sessions, closed classes or dedicated events are available both live online and at our training centres in Dublin and London, as well as at your offices anywhere in the UK, Ireland or across EMEA.<p></p></div>

Business Analysis

ACT Awareness

Business Case Development

Analytical Skills

BA17 - Advanced Root Cause Analysis

<div id="course-pills-1">Duration<p>5 Days</p><p>30 CPD hours</p>This course is intended for<p>This course is intended for individuals who want to learn how to program Android applications using the Java Programming Language.</p>Overview<p>Upon successful completion of this course, students will have an understanding of basic application Android development.</p><p>This course will teach the basics of Android Development using  the Java Programming Language and Android Studio.</p></div><div id="course-pills-2"><h4>Introduction and Setup</h4><ul><li>Android Studio Development Essentials Introduction</li><li>Setting up an Android Studio Development Environment</li><li>Creating an Example Android App in Android Studio</li><li>A Tour of the Android Studio User Interface</li><li>Creating an Android Virtual Device (AVD) in Android Studio</li><li>Using and Configuring the Android Studio AVD Emulator</li><li>Testing Android Studio Apps on a Physical Android Device</li><li>The Basics of the Android Studio Code Editor</li></ul><h4>Android Architecture and State Changes</h4><ul><li>An Overview of the Android Architecture</li><li>The Anatomy of an Android Application</li><li>Understanding Android Application and Activity Lifecycles</li><li>Handling Android Activity State Changes</li><li>Android Activity State Changes by Example</li><li>Saving and Restoring the State of an Android Activity</li></ul><h4>Views and Layouts</h4><ul><li>Understanding Android Views, View Groups and Layouts in Android Studio</li><li>A Guide to the Android Studio Layout Editor Tool</li><li>A Guide to the Android ConstraintLayout</li><li>A Guide to using ConstraintLayout in Android Studio</li><li>An Android Studio Layout Editor ConstraintLayout Tutorial</li><li>Manual XML Layout Design in Android Studio</li><li>Creating an Android User Interface in Java Code</li></ul><h4>Event Handling</h4><ul><li>An Overview and Example of Android Event Handling</li><li>A Guide to using Instant Run in Android Studio</li><li>Android Touch and Multi-touch Event Handling</li><li>Detecting Common Gestures using Android Studio and the Gesture Detector Class</li><li>Implementing Custom Gesture and Pinch Recognition on Android</li></ul><h4>Advanced Layout and Transitions</h4><ul><li>An Introduction Android Fragments</li><li>Using Fragments in Android Studio - An Example</li><li>Creating and Managing Overflow Menus on Android</li><li>Animating User Interfaces with the Android Transitions Framework</li><li>An Android Transition Tutorial using beginDelayedTransition</li><li>Implementing Android Scene Transitions ? A Tutorial</li><li>Working with the Floating Action Button and Snackbar</li><li>Creating a Tabbed Interface using the TabLayout Component</li><li>Working with the RecyclerView and CardView Widgets</li><li>An Android RecyclerView and CardView Tutorial</li><li>Working with the AppBar and Collapsing Toolbar Layouts</li><li>Implementing an Android Navigation Drawer</li><li>An Android Studio Master/Detail Flow Tutorial </li></ul><h4>Intents, Threads, Services, and Notifications</h4><ul><li>An Overview of Android Intents</li><li>Android Explicit Intents ? A Worked Example</li><li>Android Implicit Intents ? A Worked Example</li><li>Android Broadcast Intents and Broadcast Receivers</li><li>A Basic Overview of Threads and Thread Handlers</li><li>An Overview of Android Started and Bound Services</li><li>Implementing an Android Started Service - A Worked Example</li><li>Android Local Bound Services - A Worked Example</li><li>Android Remote Bound Services - A Worked Example</li><li>An Android 7 Notifications Tutorial</li><li>An Android 7 Direct Reply Notification Tutorial</li></ul><h4>Data Access and Storage</h4><ul><li>Integrating Firebase Support into an Android Studio Project</li><li>An Android 7 Firebase Remote Notification Tutorial</li><li>An Introduction to Android 7 Multi-Window Support</li><li>An Android Studio Multi-Window Split-Screen and Freeform Tutorial</li><li>An Overview of Android SQLite Databases in Android Studio</li><li>An Android TableLayout and TableRow Tutorial</li><li>An Android SQLite Database Tutorial</li><li>Understanding Android Content Providers</li><li>Implementing an Android Studio Content Provider in Android Studio</li><li>Accessing Cloud Storage using the Android Storage Access Framework</li><li>An Android Storage Access Framework Example</li></ul><h4>Multimedia, Maps and Printing</h4><ul><li>Video Playback on Android VideoView and MediaController Classes</li><li>Video Recording and Image Capture using Camera Intents</li><li>Making Runtime Permission Requests in Android</li><li>Android Audio Recording and Playback using MediaPlayer and MediaRecorder</li><li>Working with the Google Maps Android API in Android Studio</li><li>Printing with the Android Printing Framework</li><li>An Android HTML and Web Content Printing Example</li><li>A Guide to Android Custom Document Printing</li></ul><h4>Final Build</h4><ul><li>An Android Fingerprint Authentication Tutorial</li><li>Handling Different Android Devices and Displays</li><li>Signing and Preparing an Android Application for Release</li><li>Integrating Google Play In-app Billing into an Android Application</li><li>An Overview of Gradle in Android Studio</li><li>An Android Studio Gradle Build Variants Example</li></ul></div><div id="course-pills-3"><h4>Additional course details:</h4><br /><p>Nexus Humans Android Studio Development Essentials training program is a workshop that presents an invigorating mix of sessions, lessons, and masterclasses meticulously crafted to propel your learning expedition forward. </p><p></p> This immersive bootcamp-style experience boasts interactive lectures, hands-on labs, and collaborative hackathons, all strategically designed to fortify fundamental concepts. <p></p>Guided by seasoned coaches, each session offers priceless insights and practical skills crucial for honing your expertise. Whether you're stepping into the realm of professional skills or a seasoned professional, this comprehensive course ensures you're equipped with the knowledge and prowess necessary for success.  <p></p>While we feel this is the best course for the Android Studio Development Essentials course and one of our Top 10 we encourage you to read the course outline to make sure it is the right content for you.  <p></p>Additionally, private sessions, closed classes or dedicated events are available both live online and at our training centres in Dublin and London, as well as at your offices anywhere in the UK, Ireland or across EMEA.<p></p></div>

App Development

Android Development

Mobile Development

Android

iOS Development

ISTQB Foundation Level Mobile Application Testing

Android Studio Development Essentials

<div id="course-pills-1">Duration<p>3 Days</p><p>18 CPD hours</p>This course is intended for<p>Attendee roles might include:<br />Software Developers/Programmers<br />Data Scientists<br />Machine Learning Engineers<br />AI Researchers<br />User Interface (UI) and User Experience (UX) Designers<br />Technical Product Managers<br />Technical Team Leads</p>Overview<p>Working in an interactive learning environment, led by our engaging AI expert you'll:<br />Develop a strong foundational understanding of generative AI techniques and their applications in software development.<br />Gain hands-on experience working with popular generative AI models, including Generative Adversarial Networks (GANs), Variational Autoencoders (VAEs), and Transformer models.<br />Master the use of leading AI libraries and frameworks, such as TensorFlow, Keras, and Hugging Face Transformers, for implementing generative AI models.<br />Acquire the skills to design, train, optimize, and evaluate custom generative AI models tailored to specific software development tasks.<br />Learn to fine-tune pre-trained generative AI models for targeted applications and deploy them effectively in various environments, including cloud-based services and on-premises servers.<br />Understand and address the ethical, legal, and safety considerations of using generative AI, including mitigating biases and ensuring responsible AI-generated content.</p><p>Prompt Engineering offers coders and software developers a competitive edge by empowering them to develop more effective and efficient AI-driven solutions in their projects. By harnessing the capabilities of cutting-edge AI models like GPT-4, coders can automate repetitive tasks, enhance natural language understanding, and even generate code suggestions, boosting productivity and creativity. In addition, mastering prompt engineering can contribute to improved job security, as professionals with these in-demand skills are highly sought after in the rapidly evolving tech landscape. Quick Start to Prompt Engineering for Coders and Software Developers is a one day course designed to get you quickly up and running with the prompting skills required to out AI to work for you in your development efforts.  Guided by our AI expert, you?ll explore key topics such as text preprocessing, data cleansing, GPT-4 tokenization, input formatting, prompt design, and optimization, as well as ethical considerations in prompt engineering. In the hands-on labs you?ll explore tasks such as formatting inputs for GPT-4, designing and optimizing prompts for business applications, and implementing multi-turn conversations with AI. You?ll work with innovative tools like the OpenAI API, OpenAI Codex, and OpenAI Playground, enhancing your learning experience while preparing you for integrating prompt engineering into your professional toolkit. By the end of this immersive course, you?ll have the skills necessary to effectively use prompt engineering in your software development projects. You'll be able to design, optimize, and test prompts for various business tasks, integrate GPT-4 with other software platforms, and address ethical concerns in AI deployment.</p></div><div id="course-pills-2">Generative AI represents an exhilarating frontier in artificial intelligence, specializing in the creation of new data instances, imitation of real data, and content generation. Its remarkable capabilities facilitate automated content creation, enriched user experiences, and groundbreaking solutions across diverse industries, ultimately fueling efficiency and transcending technological limits. By harnessing the power of generative AI, developers can craft dynamic content, produce code and documentation, refine user interfaces, and devise customized recommendations, empowering them to construct highly efficient and custom solutions for a wide range of applications. Designed for experienced programmers, Turbocharge Your Code! Generative AI Boot Camp for Developers is a three-day workshop-style course that teaches you the latest skills and tools required to master generative AI models, transforming the way you approach software development. In today's fast-paced technological landscape, generative AI has emerged as a game-changer, with leading companies like NVIDIA, OpenAI, and Google leveraging its capabilities to push the boundaries of innovation. By learning how to harness the power of generative models such as GANs, VAEs, and Transformer models, you will be able to generate code, documentation, and tests, enhance user interfaces, and create dynamic content that adapts to user needs. Our comprehensive curriculum covers everything from the fundamentals of generative AI to advanced techniques and ethical considerations, including hands-on labs where you will develop and deploy custom models using state-of-the-art AI tools and libraries like TensorFlow and Hugging Face Transformers. Throughout the course you'll focus on practical application and collaboration, building confidence with personalized guidance and real-time feedback from our expert live instructor. Upon completion, you will be equipped with the knowledge and experience necessary to develop and implement innovative generative AI models across various industries, improving existing products, creating new applications, and gaining highly-valuable skills in the rapidly advancing field of AI.</div><div id="course-pills-3"><h4>Additional course details:</h4><br /><p>Nexus Humans Turbocharge Your Code! Generative AI Boot Camp for Developers  (TTAI2305) training program is a workshop that presents an invigorating mix of sessions, lessons, and masterclasses meticulously crafted to propel your learning expedition forward. </p><p></p> This immersive bootcamp-style experience boasts interactive lectures, hands-on labs, and collaborative hackathons, all strategically designed to fortify fundamental concepts. <p></p>Guided by seasoned coaches, each session offers priceless insights and practical skills crucial for honing your expertise. Whether you're stepping into the realm of professional skills or a seasoned professional, this comprehensive course ensures you're equipped with the knowledge and prowess necessary for success.  <p></p>While we feel this is the best course for the Turbocharge Your Code! Generative AI Boot Camp for Developers  (TTAI2305) course and one of our Top 10 we encourage you to read the course outline to make sure it is the right content for you.  <p></p>Additionally, private sessions, closed classes or dedicated events are available both live online and at our training centres in Dublin and London, as well as at your offices anywhere in the UK, Ireland or across EMEA.<p></p></div>

Generative Design

Generative AI

AI Art Generation

Generative Adversarial Networks (GAN)

AI (Artificial Intelligence)

Turbocharge Your Code! Generative AI Boot Camp for Developers  (TTAI2305)

<div id="course-pills-1">Duration<p>3 Days</p><p>18 CPD hours</p>This course is intended for<p>This class is intended for the following job roles:<br />[Cloud] information security analysts, architects, and engineers<br />Information security/cybersecurity specialists<br />Cloud infrastructure architects Additionally, the course is intended for Google and partner field personnel who work with customers in those job roles.<br />The course should also be useful to developers of cloud applications</p>Overview<p>This course teaches participants the following skills:<br />Understanding the Google approach to security Managing administrative identities using Cloud Identity.<br />Implementing least privilege administrative access using Google Cloud Resource Manager, Cloud IAM.<br />Implementing IP traffic controls using VPC firewalls and Cloud Armor Implementing Identity Aware Proxy Analyzing changes to the configuration or metadata of resources with GCP audit logs Scanning for and redact sensitive data with the Data Loss Prevention API Scanning a GCP deployment with Forseti Remediating important types of vulnerabilities, especially in public access to data and VMs</p><p>This course gives participants broad study of security controls and techniques on Google Cloud Platform. Through lectures, demonstrations, and hands-on labs, participants explore and deploy the components of a secure Google Cloud solution. Participants also learn mitigation techniques for attacks at many points in a Google Cloud-based infrastructure, including Distributed Denial-of-Service attacks, phishing attacks, and threats involving content classification and use.</p></div><div id="course-pills-2"><h4>Foundations of GCP Security</h4><ul><li>Google Cloud's approach to security </li><li>The shared security responsibility model </li><li>Threats mitigated by Google and by GCP </li><li>Access Transparency </li></ul><h4>Cloud Identity</h4><ul><li>Cloud Identity </li><li>Syncing with Microsoft Active Directory </li><li>Choosing between Google authentication and SAML-based SSO </li><li>GCP best practices </li></ul><h4>Identity and Access Management</h4><ul><li>GCP Resource Manager: projects, folders, and organizations </li><li>GCP IAM roles, including custom roles </li><li>GCP IAM policies, including organization policies </li><li>GCP IAM best practices </li></ul><h4>Configuring Google Virtual Private Cloud for Isolation and Security</h4><ul><li>Configuring VPC firewalls (both ingress and egress rules) </li><li>Load balancing and SSL policies </li><li>Private Google API access </li><li>SSL proxy use </li><li>Best practices for structuring VPC networks </li><li>Best security practices for VPNs </li><li>Security considerations for interconnect and peering options</li><li>Available security products from partners</li></ul><h4>Monitoring, Logging, Auditing, and Scanning</h4><ul><li>Stackdriver monitoring and logging </li><li>VPC flow logs </li><li>Cloud audit logging </li><li>Deploying and Using Forseti </li></ul><h4>Securing Compute Engine: techniques and best practices</h4><ul><li>Compute Engine service accounts, default and customer-defined </li><li>IAM roles for VMs </li><li>API scopes for VMs </li><li>Managing SSH keys for Linux VMs </li><li>Managing RDP logins for Windows VMs </li><li>Organization policy controls: trusted images, public IP address, disabling serial port </li><li>Encrypting VM images with customer-managed encryption keys and with customer-supplied encryption keys </li><li>Finding and remediating public access to VMs </li><li>VM best practices </li><li>Encrypting VM disks with customer-supplied encryption keys </li></ul><h4>Securing cloud data: techniques and best practices</h4><ul><li>Cloud Storage and IAM permissions </li><li>Cloud Storage and ACLs </li><li>Auditing cloud data, including finding and remediating publicly accessible data </li><li>Signed Cloud Storage URLs</li><li>Signed policy documents</li><li>Encrypting Cloud Storage objects with customer-managed encryption keys and with customer-supplied encryption keys</li><li>Best practices, including deleting archived versions of objects after key rotation</li><li>BigQuery authorized views</li><li>BigQuery IAM roles</li><li>Best practices, including preferring IAM permissions over ACLs</li></ul><h4>Protecting against Distributed Denial of Service Attacks: techniques and best practices</h4><ul><li>How DDoS attacks work </li><li>Mitigations: GCLB, Cloud CDN, autoscaling, VPC ingress and egress firewalls, Cloud Armor </li><li>Types of complementary partner products </li></ul><h4>Application Security: techniques and best practices</h4><ul><li>Types of application security vulnerabilities </li><li>DoS protections in App Engine and Cloud Functions </li><li>Cloud Security Scanner</li><li>Threat: Identity and Oauth phishing</li><li>Identity Aware Proxy</li></ul><h4>Content-related vulnerabilities: techniques and best practices</h4><ul><li>Threat: Ransomware</li><li>Mitigations: Backups, IAM, Data Loss Prevention API </li><li>Threats: Data misuse, privacy violations, sensitive/restricted/unacceptable content </li><li>Mitigations: Classifying content using Cloud ML APIs; scanning and redacting data using Data Loss Prevention API </li></ul></div><div id="course-pills-3"><h4>Additional course details:</h4><br /><p>Nexus Humans Security in Google Cloud training program is a workshop that presents an invigorating mix of sessions, lessons, and masterclasses meticulously crafted to propel your learning expedition forward. </p><p></p> This immersive bootcamp-style experience boasts interactive lectures, hands-on labs, and collaborative hackathons, all strategically designed to fortify fundamental concepts. <p></p>Guided by seasoned coaches, each session offers priceless insights and practical skills crucial for honing your expertise. Whether you're stepping into the realm of professional skills or a seasoned professional, this comprehensive course ensures you're equipped with the knowledge and prowess necessary for success.  <p></p>While we feel this is the best course for the Security in Google Cloud course and one of our Top 10 we encourage you to read the course outline to make sure it is the right content for you.  <p></p>Additionally, private sessions, closed classes or dedicated events are available both live online and at our training centres in Dublin and London, as well as at your offices anywhere in the UK, Ireland or across EMEA.<p></p></div>

Certified Cloud Security Professional (CCSP)

Cyber Security

Google Cloud

Security in Google Cloud

<div id="course-pills-1">Duration<p>2 Days</p><p>12 CPD hours</p>This course is intended for<p>The primary audience for this course is any IT, facilities or data centre professional who works in and around the data centre and who has the responsibility to achieve and improve the availability and manageability of the data centre.</p>Overview<p>After completion of the course the participant will be able to:? Choose an optimum site for mission-critical data centre based on current and future needs? Describe all components that are important for high availability in a data centre and how to effectively setup the data centre? Name and apply the various industry standards? Describe the various technologies for UPS, fire suppression, cooling, monitoring systems, cabling standards, etc, and to select and apply them effectively to cost-efficiently enhance the high-availability of the data centre.? Review the electrical distribution system to avoid costly downtime? Enhance cooling capabilities and efficiency in the data centre by using existing and new techniques and technologies for the increased cooling requirements of the future? Design a highly reliable and scalable network architecture and learn how to ensure installers apply proper testing techniques? Create effective maintenance contracts with equipment suppliers ensuring the best return on investment? Setup effective data centre monitoring ensuring the right people get the right message? Ensure proper security measures, both procedural and technical, are established to safeguard your company's valuable information in the data centre</p><p>The course will address how to setup and improve key aspects such as power, cooling, security, cabling, safety, etc., to ensure a high available data centre. It will also address key operations and maintenance aspects.</p></div><div id="course-pills-2"><h4>The Data Centre, it?s Importance and Causes for Downtime</h4><h4>Data Centre Standards and Best Practices</h4><h4>Data Centre Location, Building and Construction</h4><ul><li>Selecting appropriate sites and buildings and how to avoid pitfalls<br />Various components of an effective data centre and supporting facilities setup</li></ul><h4>Raised Floor/Suspended Ceiling</h4><ul><li>Uniform, concentrated and rolling load definitions<br />Applicable standards<br />Raised Floor guidelines<br />Signal Reference Grid, grounding of racks<br />Disability act and regulations<br />Suspended ceiling usage and requirements</li></ul><h4>Light</h4><ul><li>Standards<br />Light fixture types and placement<br />Emergency lighting, Emergency Power Supply (EPS)</li></ul><h4>Power Infrastructure</h4><ul><li>Power infrastructure layout from generation to rack level<br />ATS and STS systems<br />Redundancy levels and techniques<br />Three-phase and single-phase usage<br />Power distribution options within the computer room<br />Power cabling versus bus bar trunking<br />Bonding versus grounding<br />Common Mode Noise and isolation transformers<br />Distribution boards, form factors and IP-protection grades<br />Power quality guidelines<br />Real power versus apparent power<br />How to size and calculate load in the data centre Generators<br />Static and dynamic UPS systems, selection criteria, how they operate and energy efficiency option<br />Battery types, correct selection and testing<br />Thermo-graphics</li></ul><h4>Electro Magnetic Fields</h4><ul><li>Electrical fields and magnetic fields definitions and units of measurements<br />Sources of EMF<br />Effects of EMF on human health and equipment<br />(H)EMP<br />Standards<br />EMF shielding solutions</li></ul><h4>Equipment Racks</h4><ul><li>Rack standards, properties and selection criteria<br />Security considerations<br />Power rail/strip options</li></ul><h4>Cooling Infrastructure</h4><ul><li>Temperature and humidity recommendations<br />Cooling measurement units and conversion rates<br />Sensible and latent heat definitions<br />Differences between comfort and precision cooling<br />Overview of different air conditioner technologies<br />Raised floor versus non-raised floor cooling<br />Placement of air conditioner units and limitations to be observed<br />Supplemental cooling options<br />Cold aisle/hot aisle containment</li></ul><h4>Water Supply</h4><ul><li>Importance of water supply and application areas<br />Backup water supply techniques</li></ul><h4>Designing a Scalable Network Infrastructure</h4><ul><li>The importance of a Structured Cabling System<br />Planning considerations<br />Copper and Fiber cable technology and standards<br />ANSI/TIA-942 Cabling hierarchy and recommendations<br />Testing and verification<br />SAN storage cabling<br />Network redundancy<br />Building-to-building connectivity<br />Network monitoring system requirements</li></ul><h4>Fire Suppression</h4><ul><li>Standards for fire suppression<br />Detection systems<br />Various total flooding fire suppression techniques and systems, their benefits and disadvantages<br />Handheld extinguishers<br />Signage and safety<br />Regulatory requirements and best practices</li></ul><h4>Data Centre Monitoring</h4><ul><li>Data centre monitoring requirements<br />EMS versus BMS<br />Water leak detection systems<br />Notification options and considerations</li></ul><h4>Operational Security and Safety Practices</h4><ul><li>Data centre security layers<br />Physical, infrastructure and organisational security<br />Safety measures and essential signage</li></ul><h4>Labelling</h4><ul><li>Choosing a labelling scheme<br />Recommended labelling practices<br />Network labelling</li></ul><h4>Documentation</h4><ul><li>How to setup proper documentation<br />Document management policies and procedures</li></ul><h4>Cleaning</h4><ul><li>Cleaning practices for the data centre</li></ul><h4>MTBF/MTTR</h4><ul><li>Standards and definitions<br />Calculation models<br />The ?real? value</li></ul><h4>Maintenance Contracts/SLA/OLA</h4><h4>EXAM: Certified Data Centre Professional</h4></div><div id="course-pills-3"><h4>Additional course details:</h4><br /><p>Nexus Humans Certified Data Centre Professional (CDCP) training program is a workshop that presents an invigorating mix of sessions, lessons, and masterclasses meticulously crafted to propel your learning expedition forward. </p><p></p> This immersive bootcamp-style experience boasts interactive lectures, hands-on labs, and collaborative hackathons, all strategically designed to fortify fundamental concepts. <p></p>Guided by seasoned coaches, each session offers priceless insights and practical skills crucial for honing your expertise. Whether you're stepping into the realm of professional skills or a seasoned professional, this comprehensive course ensures you're equipped with the knowledge and prowess necessary for success.  <p></p>While we feel this is the best course for the Certified Data Centre Professional (CDCP) course and one of our Top 10 we encourage you to read the course outline to make sure it is the right content for you.  <p></p>Additionally, private sessions, closed classes or dedicated events are available both live online and at our training centres in Dublin and London, as well as at your offices anywhere in the UK, Ireland or across EMEA.<p></p></div>

Construction Design & Management (CDM)

Certified in Data Protection (CDP)

Certified Cyber Professional (CCP)

Certified Data Centre Professional (CDCP)

General Admission

<div id="course-pills-1">Duration<p>5 Days</p><p>30 CPD hours</p>This course is intended for<p>This course is designed for anyone seeking CCNA certification. The course also provides foundational knowledge for all support technicians involved in the basic installation, operation, and verification of Cisco networks. The job roles best suited to the material in this course are:<br />Entry-level network engineer<br />Network administrator<br />Network support technician<br />Help desk technician</p>Overview<p>This course will help you:<br />Learn the knowledge and skills to install, configure, and operate a small- to medium-sized network<br />Gain a foundation in the essentials of networking, security, and automation<br />Earn 30 CE credits toward recertification</p><p>The Implementing and Administering Cisco Solutions (CCNA) v2.0 course gives you a broad range of fundamental knowledge for all IT careers. Through a combination of lecture, hands-on labs, and self-study, you will learn how to install, operate, configure, and verify basic IPv4 and IPv6 networks. The course covers configuring network components such as switches, routers, and wireless LAN controllers; managing network devices; and identifying basic security threats. The course also gives you a foundation in network programmability, automation, and software-defined networking. This course helps you prepare to take the 200-301 CiscoÂ© Certified Network Associate (CCNAÂ©) exam. By passing this one exam, you earn the CCNA certification. This course also earns you 30 Continuing Education (CE) credits towards recertification.</p></div><div id="course-pills-2"><h4>Course Outline </h4><ul><li>Exploring the Functions of Networking ? Lecture</li><li>Introducing the Host-to-Host Communications Model ? Lecture</li><li>Operating Cisco IOS Software ? Lecture</li><li>Introducing LANs ? Lecture</li><li>Exploring the TCP/IP Link Layer ? Lecture</li><li>Starting a Switch ? Lecture</li><li>Introducing the TCP/IP Internet Layer, IPv4 Addressing, and Subnets ? Lecture</li><li>Explaining the TCP/IP Transport Layer and Application Layer ? Lecture</li><li>Exploring the Functions of Routing ? Lecture</li><li>Configuring a Cisco Router ? Lecture</li><li>Exploring the Packet Delivery Process ? Lecture</li><li>Troubleshooting a Simple Network ? Lecture</li><li>Introducing Basic IPv6 ? Lecture</li><li>Configuring Static Routing ? Lecture</li><li>Implementing VLANs and Trunks ? Lecture</li><li>Routing Between VLANs ? Lecture</li><li>Introducing OSPF ? Lecture</li><li>Building Redundant Switched Topologies ? Self-study</li><li>Improving Redundant Switched Topologies with EtherChannel ? Lecture</li><li>Exploring Layer 3 Redundancy ? Self-study</li><li>Introducing WAN Technologies ? Self-study</li><li>Explaining Basics of ACL ? Lecture</li><li>Enabling Internet Connectivity ? Lecture</li><li>Introducing QoS ? Self-study</li><li>Explaining Wireless Fundamentals ? Self-study</li><li>Introducing Architectures and Virtualization ? Self-study</li><li>Explaining the Evolution of Intelligent Networks ? Lecture</li><li>Introducing System Monitoring ? Lecture</li><li>Managing Cisco Devices ? Lecture</li><li>Examining the Security Threat Landscape ? Self-study</li></ul></div><div id="course-pills-3"><h4>Additional course details:</h4><br /><p>Nexus Humans Cisco Implementing and Administering Cisco Solutions v2.0 (CCNA) training program is a workshop that presents an invigorating mix of sessions, lessons, and masterclasses meticulously crafted to propel your learning expedition forward. </p><p></p> This immersive bootcamp-style experience boasts interactive lectures, hands-on labs, and collaborative hackathons, all strategically designed to fortify fundamental concepts. <p></p>Guided by seasoned coaches, each session offers priceless insights and practical skills crucial for honing your expertise. Whether you're stepping into the realm of professional skills or a seasoned professional, this comprehensive course ensures you're equipped with the knowledge and prowess necessary for success.  <p></p>While we feel this is the best course for the Cisco Implementing and Administering Cisco Solutions v2.0 (CCNA) course and one of our Top 10 we encourage you to read the course outline to make sure it is the right content for you.  <p></p>Additionally, private sessions, closed classes or dedicated events are available both live online and at our training centres in Dublin and London, as well as at your offices anywhere in the UK, Ireland or across EMEA.<p></p></div>

Certified in Cybersecurity (CC)

Cisco Certified Network Professional certification (CCNP)

Cisco Certified Internetwork Expert (CCIE)

Cisco Implementing and Administering Cisco Solutions v2.0 (CCNA)

<div id="course-pills-1">Duration<p>5 Days</p><p>30 CPD hours</p>This course is intended for<p>This course will prepare participants to take the FC0-U61 exam to obtain the IT Fundamentals+ certification and help participants learn some of the basic principles and techniques of providing PC, mobile, applications, and network support.</p>Overview<p>On course completion, participants will be able to: - Set up a computer workstation and use basic software applications. - Explain the functions and types of devices used within a computer system. - Apply basic computer maintenance and support principles. - Describe some principles of software and database development. - Configure computers and mobile devices to connect to home networks and to the Internet. - Identify security issues affecting the use of computers and networks.</p><p>This course will prepare participants to take the FC0-U61 exam to obtain the IT Fundamentals+ certification and help participants learn some of the basic principles and techniques of providing PC, mobile, applications, and network support.</p></div><div id="course-pills-2"><h3>1 - Identifying Computer Hardware</h3> <ul> <li>Identify Types of Computing Devices</li> <li>Identify Internal Computer Components</li> <li>Common Computer Connector Types</li> <li>Identify Common Peripheral Devices</li> </ul> <h3>2 - Identifying Computer Software</h3> <ul> <li>Compare Functions and Features of Common Operating Systems</li> <li>Identify Application Software</li> </ul> <h3>3 - Setting Up a Basic Workstation</h3> <ul> <li>Connect Hardware</li> <li>Install and Configure Operating Systems</li> <li>Install and Configure Applications</li> <li>Configure Accessibility Options</li> </ul> <h3>4 - Configuring Network Access</h3> <ul> <li>Network Connection Types</li> <li>Install and Configure a SOHO Router</li> <li>Network and Alternative Technologies</li> <li>Sharing and Storage Methods</li> </ul> <h3>5 - Working with Files, Folders, and Applications</h3> <ul> <li>Create Files</li> <li>Navigate a File Structure</li> <li>Manage Files and Folders</li> <li>Compress and Extract Files</li> <li>Create Screen Captures</li> </ul> <h3>6 - Configuring and Using Wireless Devices</h3> <ul> <li>Configuring Wireless Devices</li> <li>Use Wireless Devices</li> </ul> <h3>7 - Securing Computing Devices</h3> <ul> <li>Identify Security Threats</li> <li>Apply Security Best Practices</li> <li>Perform Secure Web Browsing</li> </ul> <h3>8 - Supporting Computers and Users</h3> <ul> <li>Environmental and Safety Concepts</li> <li>Back Up and Restore Data</li> <li>Manage Software</li> <li>Implement Basic Support Measures</li> </ul></div><div id="course-pills-3"><h4>Additional course details:</h4><br /><p>Nexus Humans CompTIA IT Fundamentals Plus Certification (ITF Plus) (Exam FCO-U61) training program is a workshop that presents an invigorating mix of sessions, lessons, and masterclasses meticulously crafted to propel your learning expedition forward. </p><p></p> This immersive bootcamp-style experience boasts interactive lectures, hands-on labs, and collaborative hackathons, all strategically designed to fortify fundamental concepts. <p></p>Guided by seasoned coaches, each session offers priceless insights and practical skills crucial for honing your expertise. Whether you're stepping into the realm of professional skills or a seasoned professional, this comprehensive course ensures you're equipped with the knowledge and prowess necessary for success.  <p></p>While we feel this is the best course for the CompTIA IT Fundamentals Plus Certification (ITF Plus) (Exam FCO-U61) course and one of our Top 10 we encourage you to read the course outline to make sure it is the right content for you.  <p></p>Additionally, private sessions, closed classes or dedicated events are available both live online and at our training centres in Dublin and London, as well as at your offices anywhere in the UK, Ireland or across EMEA.<p></p></div>

CompTIA A+

CompTIA IT Fundamentals+

<div id="course-pills-1">Duration<p>5 Days</p><p>30 CPD hours</p>This course is intended for<p>Candidates for this course design, develop, secure, and troubleshoot Power Platform solutions. Candidates implement components of a solution that include application enhancements, custom user experience, system integrations, data conversions, custom process automation, and custom visualizations. Candidates will gain applied knowledge of Power Platform services, including in-depth understanding of capabilities, boundaries, and constraints.</p>Overview<p>After completing this course, students will be able to:<br />Create a technical design<br />Configure Common Data Service<br />Create and configure Power Apps<br />Configure business process automation<br />Extend the user experience<br />Extend the platform<br />Develop Integrations</p><p>The Microsoft Power Platform helps organizations optimize their operations by simplifying, automating and transforming business tasks and processes. In this course, students will learn how to build Power Apps, Automate Flows and extend the platform to complete business requirements and solve complex business problems.</p></div><div id="course-pills-2"><h4>Create a model-driven application in Power Apps</h4><ul><li>This module introduces you to creating a model-driven app in Power Apps that uses Common Data Service.</li></ul><h4>Get started using Common Data Service</h4><ul><li>This module will explain the concepts behind and benefits of Common Data Service. Creating an environment, entities, fields and options sets are also discussed.</li></ul><h4>Create a canvas app in Power Apps</h4><ul><li>This module introduces you to Power Apps, helps you create and customize an app, and then manage and distribute it. It will also show you how to provide the best app navigation, and build the best UI using themes, icons, images, personalization, different form factors, and controls.</li></ul><h4>Automate a business process using Power Automate</h4><ul><li>This module introduces you to Power Automate, teaches you how to build workflows, and how to administer flows.</li></ul><h4>Create a business process flow in Power Automate</h4><ul><li>This module introduces you to creating business process flows in Power Automate</li></ul><h4>Introduction to developing with Power Platform</h4><ul><li>This module is the first step in learning about platform, tools, and the ecosystem of the Power Platform</li></ul><h4>Extending the Power Platform user experience Model Driven apps</h4><ul><li>This module describes how to create client scripting, perform common actions with client script, and automate business process flow with client scrip. Learn about what client script can do, rules, and maintaining scripts. Discover when to use client script as well as when not to use client script.</li></ul><h4>Create components with Power Apps Component Framework</h4><ul><li>This module describes how to get started with Power Apps Component Framework with an introductory module on the core concepts and components. Then it shows you how to build a component and work with advanced Power Apps Component Framework features.</li></ul><h4>Extending the Power Platform Common Data Service</h4><ul><li>This module looks at the tools and resources needed for extending the Power Platform. We'll start with looking at the SDKs, the extensibility model, and event framework. This learning path also covers when to use plug-ins. Configuration of plug-ins as well as registering and deploying plug-ins.</li></ul><h4>Integrate with Power Platform and Common Data Service</h4><ul><li>This module describes how to integrate with Common Data Service using code by learning about Common Data Service API. Get an in-depth overview of options available with Common Data Service to integrate data and events to Azure.</li></ul><h4>Extend Power Apps portals</h4><ul><li>This module describes how to transform a content portal into a full web app interacting with Common Data Service. We will also cover the options available to customizers and developers to extend the portal functionality and integrate with Office 365, Power Platform, and Azure components.</li></ul></div><div id="course-pills-3"><h4>Additional course details:</h4><br /><p>Nexus Humans PL-400T00 Microsoft Power Platform Developer training program is a workshop that presents an invigorating mix of sessions, lessons, and masterclasses meticulously crafted to propel your learning expedition forward. </p><p></p> This immersive bootcamp-style experience boasts interactive lectures, hands-on labs, and collaborative hackathons, all strategically designed to fortify fundamental concepts. <p></p>Guided by seasoned coaches, each session offers priceless insights and practical skills crucial for honing your expertise. Whether you're stepping into the realm of professional skills or a seasoned professional, this comprehensive course ensures you're equipped with the knowledge and prowess necessary for success.  <p></p>While we feel this is the best course for the PL-400T00 Microsoft Power Platform Developer course and one of our Top 10 we encourage you to read the course outline to make sure it is the right content for you.  <p></p>Additionally, private sessions, closed classes or dedicated events are available both live online and at our training centres in Dublin and London, as well as at your offices anywhere in the UK, Ireland or across EMEA.<p></p></div>

Microsoft PL-900

Microsoft Power Apps

Power Apps

Microsoft Power Platform

Microsoft AZ-303

Microsoft Power Automate

PL-400T00 Microsoft Power Platform Developer

<div id="course-pills-1">Duration<p>5 Days</p><p>30 CPD hours</p>This course is intended for<p>This course is for experienced information technology (IT) professionals, typically described as Enterprise Desktop Administrators (EDAs). These EDAs deploy, manage, and maintain PCs, devices, and applications across medium, large, and enterprise organizations. A significant portion of this audience uses, or intends to use, the latest release of Configuration Manager to manage and deploy PCs, devices, and applications.</p>Overview<p>Describe the features Configuration Manager and Intune include, and explain how you can use these features to manage PCs and mobile devices in an enterprise environment. Analyze data by using queries and reports. Prepare a management infrastructure, including configuring boundaries, boundary groups, and resource discovery, and integrating mobile-device management with Intune. Deploy and manage the Configuration Manager client. Configure, manage, and monitor hardware and software inventory, and use Asset Intelligence and software metering. Identify and configure the most appropriate method to distribute and manage content used for deployments. Distribute, deploy, and monitor applications for managed users and systems. Maintain software updates for PCs that Configuration Manager manages. Implement Endpoint Protection for managed PCs. Configure an operating-system deployment strategy by using Configuration Manager. Manage and maintain a Configuration Manager site.</p><p>This five-day course describes how to use Configuration Manager and its associated site systems to efficiently manage network resources. In this five-day course, you will learn day-to-day management tasks, including how to manage applications, client health, hardware and software inventory, operating system deployment, and software updates by using Configuration Manager. You also will learn how to optimize Endpoint Protection, manage compliance, and create management queries and reports.  Although this course and the associated labs are written for Microsoft Endpoint Configuration Manager and Windows 11, the skills taught will also be backwards compatible with previous editions of System Center Configuration Manager and Windows 10.</p>Prerequisites<p></p><li>Networking fundamentals, including common networking protocols, topologies, hardware, media, routing, switching, and addressing.</li>  <li>Active Directory Domain Services (AD DS) principles and fundamentals of AD DS management.</li>  <li>Installation, configuration, and troubleshooting for Windows-based personal computers.</li>  <li>Basic concepts of public key infrastructure (PKI) security.</li>  <li>Basic understanding of scripting and Windows PowerShell syntax.</li>  <li>Basic understanding of Windows Server roles and services.</li>  <li>Basic understanding of the configuration options for iOS and Android Mobile device platforms.</li><p></p></div><div id="course-pills-2"><h3>1 - Managing computers and mobile devices in the enterprise</h3> <ul> <li>Overview of systems management by using enterprise management solutions</li> <li>Overview of the Configuration Manager architecture</li> <li>Overview of the Configuration Manager administrative tools</li> <li>Tools for monitoring and troubleshooting a Configuration Manager site</li> </ul> <h3>2 - Analyzing data using queries, reports, and CMPivot</h3> <ul> <li>Introduction to queries</li> <li>Configuring SQL Server Reporting Services</li> <li>Analyzing the real-time state of a device by using CMPivot</li> </ul> <h3>3 - Preparing the Configuration Manager management infrastructure</h3> <ul> <li>Configuring site boundaries and boundary groups</li> <li>Configuring resource discovery</li> <li>Organizing resources using device and user collections</li> </ul> <h3>4 - Deploying and managing the Configuration Manager client</h3> <ul> <li>Overview of the Configuration Manager client</li> <li>Deploying the Configuration Manager client</li> <li>Configuring and monitoring client status</li> <li>Managing client settings and performing management operations</li> </ul> <h3>5 - Managing inventory for PCs and applications</h3> <ul> <li>Overview of inventory collection</li> <li>Configuring hardware and software inventory</li> <li>Managing inventory collection</li> <li>Configuring software metering</li> <li>Configuring and managing Asset Intelligence</li> </ul> <h3>6 - Distributing and managing content used for deployments</h3> <ul> <li>Preparing the infrastructure for content management</li> <li>Distributing and managing content on distribution points</li> </ul> <h3>7 - Deploying and managing applications</h3> <ul> <li>Overview of application management</li> <li>Creating applications</li> <li>Deploying applications</li> <li>Managing applications</li> <li>Deploying and managing Windows apps</li> </ul> <h3>8 - Maintaining software updates for managed PCs</h3> <ul> <li>The software updates process</li> <li>Preparing a Configuration Manager site for software updates</li> <li>Managing software updates</li> <li>Configuring automatic deployment rules</li> <li>Monitoring and troubleshooting software updates</li> <li>Enabling third-party updates</li> </ul> <h3>9 - Implementing Defender Protection for managed PCs</h3> <ul> <li>Overview of Endpoint Protection in Configuration Manager</li> <li>Configuring, deploying, and monitoring Endpoint Protection policies</li> <li>Configuring and deploying advanced threat policies</li> <h3>10 - Managing compliance and secure data access</h3> <ul> <li>Overview of Compliance Settings</li> <li>Configuring compliance settings</li> <li>Viewing compliance results</li> <li>Managing resource and data access</li> <h3>11 - Managing operating system deployment</h3> <ul> <li>An overview of operating system deployment</li> <li>Preparing a site for operating system deployment</li> <li>Deploying an operating system</li> <li>Managing Windows as a service</li> <h3>12 - Managing and maintaining a Configuration Manager site</h3> <ul> <li>Configuring role-based administration</li> <li>Configuring Remote Tools</li> <li>Overview of Configuration Manager site maintenance and Management Insights</li> <li>Backing up and recovering a Configuration Manager site</li> <li>Updating the Configuration Manager infrastructure</li> <h3>13 - What?s new in Microsoft Endpoint Configuration Manager</h3> <ul> <li>Whats new in Microsoft Endpoint Manager covering each semi annual release</li> </ul></ul></ul></ul></ul></div><div id="course-pills-3"><h4>Additional course details:</h4><br /><p>Nexus Humans 55348: Administering Microsoft Endpoint Configuration Manager training program is a workshop that presents an invigorating mix of sessions, lessons, and masterclasses meticulously crafted to propel your learning expedition forward. </p><p></p> This immersive bootcamp-style experience boasts interactive lectures, hands-on labs, and collaborative hackathons, all strategically designed to fortify fundamental concepts. <p></p>Guided by seasoned coaches, each session offers priceless insights and practical skills crucial for honing your expertise. Whether you're stepping into the realm of professional skills or a seasoned professional, this comprehensive course ensures you're equipped with the knowledge and prowess necessary for success.  <p></p>While we feel this is the best course for the 55348: Administering Microsoft Endpoint Configuration Manager course and one of our Top 10 we encourage you to read the course outline to make sure it is the right content for you.  <p></p>Additionally, private sessions, closed classes or dedicated events are available both live online and at our training centres in Dublin and London, as well as at your offices anywhere in the UK, Ireland or across EMEA.<p></p></div>

Microsoft Certification

Sccm

Microsoft Certified Technology Specialist (MCTS)

Commercial & Contract Management Certification Program (CCM)

IT Manager

Microsoft Certified Trainer (MCT)

55348 Administering Microsoft Endpoint Configuration Manager

<div id="course-pills-1">Duration<p>5 Days</p><p>30 CPD hours</p>This course is intended for<p>The Certified Ethical Hacking v12 course will significantly benefit security officers, auditors, security professionals, site administrators, and anyone who is concerned about the integrity of the network infrastructure.</p>Overview<p>Information security controls, laws, and standards. Various types of footprinting, footprinting tools, and countermeasures. Network scanning techniques and scanning countermeasures Enumeration techniques and enumeration countermeasures Vulnerability analysis to identify security loopholes in the target organization?s network, communication infrastructure, and end systems. System hacking methodology, steganography, steganalysis attacks, and covering tracks to discover system and network vulnerabilities. Different types of malware (Trojan, Virus, worms, etc.), system auditing for malware attacks, malware analysis, and countermeasures. Packet sniffing techniques to discover network vulnerabilities and countermeasures to defend against sniffing. Social engineering techniques and how to identify theft attacks to audit human-level vulnerabilities and social engineering countermeasures. DoS/DDoS attack techniques and tools to audit a target and DoS/DDoS countermeasures. Session hijacking techniques to discover network-level session management, authentication/authorization, and cryptographic weaknesses and countermeasures. Webserver attacks and a comprehensive attack methodology to audit vulnerabilities in webserver infrastructure, and countermeasures. Web application attacks, comprehensive web application hacking methodology to audit vulnerabilities in web applications, and countermeasures. SQL injection attack techniques, injection detection tools to detect SQL injection attempts, and countermeasures. Wireless encryption, wireless hacking methodology, wireless hacking tools, and Wi-Fi security tools. Mobile platform attack vector, android vulnerability exploitations, and mobile security guidelines and tools. Firewall, IDS and honeypot evasion techniques, evasion tools and techniques to audit a network perimeter for weaknesses, and countermeasures. Cloud computing concepts (Container technology, serverless computing), the working of various threats and attacks, and security techniques and tools. Penetration testing, security audit, vulnerability assessment, and penetration testing roadmap. Threats to IoT and OT platforms and defending IoT and OT devices. Cryptography ciphers, Public Key Infrastructure (PKI), cryptography attacks, and cryptanalysis tools.</p><p>CEH provides an in-depth understanding of ethical hacking phases, various attack vectors, and preventative countermeasures. It will teach you how hackers think and act maliciously so you will be better positioned to setup your security infrastructure and defend against future attacks. An understanding of system weaknesses and vulnerabilities helps organizations strengthen their system security controls to minimize the risk of an incident. CEH was built to incorporate a hands-on environment and systematic process across each ethical hacking domain and methodology, giving you the opportunity to work towards proving the required knowledge and skills needed to achieve the CEH credential. You will be exposed to an entirely different posture toward the responsibilities and measures required to be secure. Now in its 12th version, CEH continues to evolve with the latest operating systems, tools, tactics, exploits, and technologies.</p></div><div id="course-pills-2"><h3>1 - Introduction to Ethical Hacking</h3> <ul> <li>Information Security Overview</li> <li>Cyber Kill Chain Concepts</li> <li>Hacking Concepts</li> <li>Ethical Hacking Concepts</li> <li>Information Security Controls</li> <li>Information Security Laws and Standards</li> </ul> <h3>2 - 2 - Foot-printing and Reconnaissance</h3> <ul> <li>Footprinting Concepts</li> <li>Footprinting through Search Engines</li> <li>Footprinting through Web Services</li> <li>Footprinting through Social Networking Sites</li> <li>Website Footprinting</li> <li>Email Footprinting</li> <li>Who is Footprinting</li> <li>DNS Footprinting</li> <li>Network Footprinting</li> <li>Footprinting through Social Engineering</li> <li>Footprinting Tools</li> <li>Footprinting Countermeasures</li> </ul> <h3>3 - Scanning Networks</h3> <ul> <li>Network Scanning Concepts</li> <li>Scanning Tools</li> <li>Host Discovery</li> <li>Port and Service Discovery</li> <li>OS Discovery (Banner Grabbing/OS Fingerprinting) </li><li>Scanning Beyond IDS and Firewall</li> <li>Draw Network Diagrams</li> </ul> <h3>4 - Enumeration</h3> <ul> <li>Enumeration Concepts</li> <li>NetBIOS Enumeration</li> <li>SNMP Enumeration</li> <li>LDAP Enumeration</li> <li>NTP and NFS Enumeration</li> <li>SMTP and DNS Enumeration</li> <li>Other Enumeration Techniques</li> <li>Enumeration Countermeasures</li> </ul> <h3>5 - Vulnerability Analysis</h3> <ul> <li>Vulnerability Assessment Concepts</li> <li>Vulnerability Classification and Assessment Types</li> <li>Vulnerability Assessment Solutions and Tools</li> <li>Vulnerability Assessment Reports</li> </ul> <h3>6 - System Hacking</h3> <ul> <li>System Hacking Concepts</li> <li>Gaining Access</li> <li>Escalating Privileges</li> <li>Maintaining Access</li> <li>Clearing Logs</li> </ul> <h3>7 - Malware Threats</h3> <ul> <li>Malware Concepts</li> <li>APT Concepts</li> <li>Trojan Concepts</li> <li>Virus and Worm Concepts</li> <li>Fileless Malware Concepts</li> <li>Malware Analysis</li> <li>Countermeasures</li> <li>Anti-Malware Software</li> </ul> <h3>8 - Sniffing</h3> <ul> <li>Sniffing Concepts</li> <li>Sniffing Technique: MAC Attacks</li> <li>Sniffing Technique: DHCP Attacks</li> <li>Sniffing Technique: ARP Poisoning</li> <li>Sniffing Technique: Spoofing Attacks</li> <li>Sniffing Technique: DNS Poisoning</li> <li>Sniffing Tools</li> <li>Countermeasures</li> <li>Sniffing Detection Techniques</li> </ul> <h3>9 - Social Engineering</h3> <ul> <li>Social Engineering Concepts</li> <li>Social Engineering Techniques</li> <li>Insider Threats</li> <li>Impersonation on Social Networking Sites</li> <li>Identity Theft</li> <li>Countermeasures</li> </ul> <h3>10 - Denial-of-Service</h3> <ul> <li>DoS/DDoS Concepts</li> <li>DoS/DDoS Attack Techniques</li> <li>BotnetsDDoS Case Study</li> <li>DoS/DDoS Attack Tools</li> <li>Countermeasures</li> <li>DoS/DDoS Protection Tools</li> </ul> <h3>11 - Session Hijacking</h3> <ul> <li>Session Hijacking Concepts</li> <li>Application Level Session Hijacking</li> <li>Network Level Session Hijacking</li> <li>Session Hijacking Tools</li> <li>Countermeasures</li> </ul> <h3>12 - Evading IDS, Firewalls, and Honeypots</h3> <ul> <li>IDS, IPS, Firewall, and Honeypot Concepts</li> <li>IDS, IPS, Firewall, and Honeypot Solutions</li> <li>Evading IDS</li> <li>Evading Firewalls</li> <li>IDS/Firewall Evading Tools</li> <li>Detecting Honeypots</li> <li>IDS/Firewall Evasion Countermeasures</li> </ul> <h3>13 - Hacking Web Servers</h3> <ul> <li>Web Server Concepts</li> <li>Web Server Attacks</li> <li>Web Server Attack Methodology</li> <li>Web Server Attack Tools</li> <li>Countermeasures</li> <li>Patch Management</li> <li>Web Server Security Tools</li> </ul> <h3>14 - Hacking Web Applications</h3> <ul> <li>Web Application Concepts</li> <li>Web Application Threats</li> <li>Web Application Hacking Methodology</li> <li>Web API, Webhooks, and Web Shell</li> <li>Web Application Security</li> </ul> <h3>15 - SQL Injection</h3> <ul> <li>SQL Injection Concepts</li> <li>Types of SQL Injection</li> <li>SQL Injection Methodology</li> <li>SQL Injection Tools</li> <li>Evasion Techniques</li> <li>Countermeasures</li> </ul> <h3>16 - Hacking Wireless Networks</h3> <ul> <li>Wireless Concepts</li> <li>Wireless Encryption</li> <li>Wireless Threats</li> <li>Wireless Hacking Methodology</li> <li>Wireless Hacking Tools</li> <li>Bluetooth Hacking</li> <li>Countermeasures</li> <li>Wireless Security Tools</li> </ul> <h3>17 - Hacking Mobile Platforms</h3> <ul> <li>Mobile Platform Attack Vectors</li> <li>Hacking Android OS</li> <li>Hacking iOS</li> <li>Mobile Device Management</li> <li>Mobile Security Guidelines and Tools</li> </ul> <h3>18 - IoT and OT Hacking</h3> <ul> <li>IoT Hacking</li> <li>IoT Concepts</li> <li>IoT Attacks</li> <li>IoT Hacking Methodology</li> <li>IoT Hacking Tools</li> <li>Countermeasures</li> <li>OT Hacking</li> <li>OT Concepts</li> <li>OT Attacks</li> <li>OT Hacking Methodology</li> <li>OT Hacking Tools</li> <li>Countermeasures</li> </ul> <h3>19 - Cloud Computing</h3> <ul> <li>Cloud Computing Concepts</li> <li>Container Technology</li> <li>Serverless Computing</li> <li>Cloud Computing Threats</li> <li>Cloud Hacking</li> <li>Cloud Security</li> </ul> <h3>20 - Cryptography</h3> <ul> <li>Cryptography Concepts</li> <li>Encryption Algorithms</li> <li>Cryptography Tools</li> <li>Public Key Infrastructure (PKI) </li><li>Email Encryption</li> <li>Disk Encryption</li> <li>Cryptanalysis</li> <li>Countermeasures</li> </ul></div><div id="course-pills-3"><h4>Additional course details:</h4><br /><p>Nexus Humans EC-Council Certified Ethical Hacker (CEH) v.12 training program is a workshop that presents an invigorating mix of sessions, lessons, and masterclasses meticulously crafted to propel your learning expedition forward. </p><p></p> This immersive bootcamp-style experience boasts interactive lectures, hands-on labs, and collaborative hackathons, all strategically designed to fortify fundamental concepts. <p></p>Guided by seasoned coaches, each session offers priceless insights and practical skills crucial for honing your expertise. Whether you're stepping into the realm of professional skills or a seasoned professional, this comprehensive course ensures you're equipped with the knowledge and prowess necessary for success.  <p></p>While we feel this is the best course for the EC-Council Certified Ethical Hacker (CEH) v.12 course and one of our Top 10 we encourage you to read the course outline to make sure it is the right content for you.  <p></p>Additionally, private sessions, closed classes or dedicated events are available both live online and at our training centres in Dublin and London, as well as at your offices anywhere in the UK, Ireland or across EMEA.<p></p></div>

Certified Ethical Hacker (CEH)

Ethical Hacking

EC-Council Certified Ethical Hacker (CEH) v12

<div id="course-pills-1">Duration<p>5 Days</p><p>30 CPD hours</p>This course is intended for<p>This course is designed for people who are seeking to launch a career in cybersecurity.</p>Overview<p>Assess the security posture of an enterprise environment and recommend and implement appropriate security solutions; Monitor and secure hybrid environments, including cloud, mobile, and IoT; Operate with an awareness of applicable laws and policies, including principles of governance, risk, and compliance; Identify, analyze, and respond to security events and incidents.</p><p>CompTIA Security+ is a global certification that validates the baseline skills necessary to perform core security functions and is the first security certification a candidate should earn.<br /> <br /> CompTIA Security+ establishes the core knowledge required of any cybersecurity role and provides a springboard to intermediate-level cybersecurity jobs.</p></div><div id="course-pills-2"><h3>Lesson 1: Summarize Fundamental Security Concepts</h3> <ul> <li>Security Concepts</li> <li>Security Controls</li> </ul> <h3>Lesson 2: Compare Threat Types</h3> <ul> <li>Threat Actors</li> <li>Attack Surfaces</li> <li>Social Engineering</li> </ul> <h3>Lesson 3: Explain Cryptographic Solutions</h3> <ul> <li>Cryptographic Algorithms</li> <li>Public Key Infrastructure</li> <li>Cryptographic Solutions</li> </ul> <h3>Lesson 4: Implement Identity and Access Management</h3> <ul> <li>Authentication</li> <li>Authorization</li> <li>Identity Management</li> </ul> <h3>Lesson 5: Secure Enterprise Network Architecture</h3> <ul> <li>Enterprise Network Architecture</li> <li>Network Security Appliances</li> <li>Secure Communications</li> </ul> <h3>Lesson 6: Secure Cloud Network Architecture</h3> <ul> <li>Cloud Infrastructure</li> <li>Embedded Systems and Zero Trust Architecture</li> </ul> <h3>Lesson 7: Explain Resiliency and Site Security Concepts</h3> <ul> <li>Asset Management</li> <li>Redundancy Strategies</li> <li>Physical Security</li> </ul> <h3>Lesson 8: Explain Vulnerability Management</h3> <ul> <li>Device and OS Vulnerabilities</li> <li>Application and Cloud Vulnerabilities</li> <li>Vulnerability Identification Methods</li> <li>Vulnerability Analysis and Remediation</li> </ul> <h3>Lesson 9: Evaluate Network Security Capabilities</h3> <ul> <li>Network Security Baselines</li> <li>Network Security Capability Enhancement</li> </ul> <h3>Lesson 10: Assess Endpoint Security Capabilities</h3> <ul> <li>Implement Endpoint Security</li> <li>Mobile Device Hardening</li> </ul> <h3>Lesson 11: Enhance Application Security Capabilities</h3> <ul> <li>Application Protocol Security Baselines</li> <li>Cloud and Web Application Security Concepts</li> </ul> <h3>Lesson 12: Explain Incident Response and Monitoring Concepts</h3> <ul> <li>Incident Response</li> <li>Digital Forensics</li> <li>Data Sources</li> <li>Alerting and Monitoring Tools</li> </ul> <h3>Lesson 13: Analyze Indicators of Malicious Activity</h3> <ul> <li>Malware Attack Indicators</li> <li>Physical and Network Attack Indicators</li> <li>Application Attack Indicators</li> </ul> <h3>Lesson 14: Summarize Security Governance Concepts</h3> <ul> <li>Policies, Standards, and Procedures</li> <li>Change Management</li> <li>Automation and Orchestration</li> </ul> <h3>Lesson 15: Explain Risk Management Processes</h3> <ul> <li>Risk Management Processes and Concepts</li> <li>Vendor Management Concepts</li> <li>Audits and Assessments</li> </ul> <h3>Lesson 16: Summarize Data Protection and Compliance Concepts</h3> <ul> <li>Data Classification and Compliance</li> <li>Personnel Policies</li> </ul></div><div id="course-pills-3"><h4>Additional course details:</h4><br /><p>Nexus Humans CompTIA Security Plus Certification (Exam SY0-601) training program is a workshop that presents an invigorating mix of sessions, lessons, and masterclasses meticulously crafted to propel your learning expedition forward. </p><p></p> This immersive bootcamp-style experience boasts interactive lectures, hands-on labs, and collaborative hackathons, all strategically designed to fortify fundamental concepts. <p></p>Guided by seasoned coaches, each session offers priceless insights and practical skills crucial for honing your expertise. Whether you're stepping into the realm of professional skills or a seasoned professional, this comprehensive course ensures you're equipped with the knowledge and prowess necessary for success.  <p></p>While we feel this is the best course for the CompTIA Security Plus Certification (Exam SY0-601) course and one of our Top 10 we encourage you to read the course outline to make sure it is the right content for you.  <p></p>Additionally, private sessions, closed classes or dedicated events are available both live online and at our training centres in Dublin and London, as well as at your offices anywhere in the UK, Ireland or across EMEA.<p></p></div>

Certificate in Information Security Management Principles (CISMP)

<div id="course-pills-1">Duration<p>5 Days</p><p>30 CPD hours</p>This course is intended for<p></p><p>The Microsoft 365 Endpoint Administrator is responsible for deploying, configuring, securing, managing, and monitoring devices and client applications in a corporate setting. Their duties include managing identity, access, policies, updates, and apps. They work alongside the M365 Enterprise Administrator to develop and execute a device strategy that aligns with the requirements of a modern organization. Microsoft 365 Endpoint Administrators should be well-versed in M365 workloads and possess extensive skills and experience in deploying, configuring, and maintaining Windows 11 and later, as well as non-Windows devices. Their role emphasizes cloud services over on-premises management technologies.</p><p></p><p></p><p>In this course, students will learn to plan and execute an endpoint deployment strategy using contemporary deployment techniques and implementing update strategies. The course introduces essential elements of modern management, co-management approaches, and Microsoft Intune integration. It covers app deployment, management of browser-based applications, and key security concepts such as authentication, identities, access, and compliance policies. Technologies like Microsoft Entra ID, Azure Information Protection, and Microsoft Defender for Endpoint are explored to protect devices and data.</p><p></p>Prerequisites<p>The Modern Desktop Administrator must be familiar with M365 workloads and must have strong skills and experience of deploying, configuring, and maintaining Windows 11 and later, and non-Windows devices.</p></div><div id="course-pills-2"><h3>1 - Explore the Enterprise Desktop</h3> <ul> <li>Examine benefits of modern management</li> <li>Examine the enterprise desktop life-cycle model</li> <li>Examine planning and purchasing</li> <li>Examine desktop deployment</li> <li>Plan an application deployment</li> <li>Plan for upgrades and retirement</li> </ul> <h3>2 - Explore Windows Editions</h3> <ul> <li>Examine Windows client editions and capabilities</li> <li>Select client edition</li> <li>Examine hardware requirements</li> </ul> <h3>3 - Understand Microsoft Entra ID</h3> <ul> <li>Examine Microsoft Entra ID</li> <li>Compare Microsoft Entra ID and Active Directory Domain Services</li> <li>Examine Microsoft Entra ID as a directory service for cloud apps</li> <li>Compare Microsoft Entra ID P1 and P2 plans</li> <li>Examine Microsoft Entra Domain Services</li> </ul> <h3>4 - Manage Microsoft Entra identities</h3> <ul> <li>Examine RBAC and user roles in Microsoft Entra ID</li> <li>Create and manage users in Microsoft Entra ID</li> <li>Create and manage groups in Microsoft Entra ID</li> <li>Manage Microsoft Entra objects with PowerShell</li> <li>Synchronize objects from AD DS to Microsoft Entra ID</li> </ul> <h3>5 - Manage device authentication</h3> <ul> <li>Describe Microsoft Entra join </li> <li>Examine Microsoft Entra join prerequisites limitations and benefits</li> <li>Join devices to Microsoft Entra ID</li> <li>Manage devices joined to Microsoft Entra ID</li> </ul> <h3>6 - Enroll devices using Microsoft Configuration Manager</h3> <ul> <li>Deploy the Microsoft Configuration Manager client</li> <li>Monitor the Microsoft Configuration Manager client</li> <li>Manage the Microsoft Configuration Manager client</li> </ul> <h3>7 - Enroll devices using Microsoft Intune</h3> <ul> <li>Manage mobile devices with Intune</li> <li>Enable mobile device management</li> <li>Explain considerations for device enrollment</li> <li>Manage corporate enrollment policy</li> <li>Enroll Windows devices in Intune</li> <li>Enroll Android devices in Intune</li> <li>Enroll iOS devices in Intune</li> <li>Explore device enrollment manager</li> <li>Monitor device enrollment</li> <li>Manage devices remotely</li> </ul> <h3>8 - Execute device profiles</h3> <ul> <li>Explore Intune device profiles</li> <li>Create device profiles</li> <li>Create a custom device profile</li> </ul> <h3>9 - Oversee device profiles</h3> <ul> <li>Monitor device profiles in Intune</li> <li>Manage device sync in Intune</li> <li>Manage devices in Intune using scripts</li> </ul> <h3>10 - Maintain user profiles</h3> <ul> <li>Examine user profile</li> <li>Explore user profile types</li> <li>Examine options for minimizing user profile size</li> <li>Deploy and configure folder redirection</li> <li>Sync user state with Enterprise State Roaming</li> <li>Configure Enterprise State Roaming in Azure</li> </ul> <h3>11 - Execute mobile application management</h3> <ul> <li>Examine mobile application management</li> <li>Examine considerations for mobile application management</li> <li>Prepare line-of-business apps for app protection policies</li> <li>Implement mobile application management policies in Intune</li> <li>Manage mobile application management policies in Intune</li> </ul> <h3>12 - Deploy and update applications</h3> <ul> <li>Deploy applications with Intune</li> <li>Add apps to Intune</li> <li>Manage Win32 apps with Intune</li> <li>Deploy applications with Configuration Manager</li> <li>Deploying applications with Group Policy</li> <li>Assign and publish software</li> <li>Explore Microsoft Store for Business</li> <li>Implement Microsoft Store Apps</li> <li>Update Microsoft Store Apps with Intune</li> <li>Assign apps to company employees</li> </ul> <h3>13 - Administer endpoint applications</h3> <ul> <li>Manage apps with Intune</li> <li>Manage Apps on non-enrolled devices</li> <li>Deploy Microsoft 365 Apps with Intune</li> <li>Additional Microsoft 365 Apps Deployment Tools</li> <li>Configure Microsoft Edge Internet Explorer mode</li> <li>App Inventory Review</li> </ul> <h3>14 - Protect identities in Microsoft Entra ID</h3> <ul> <li>Explore Windows Hello for Business</li> <li>Deploy Windows Hello</li> <li>Manage Windows Hello for Business</li> <li>Explore Microsoft Entra ID Protection</li> <li>Manage self-service password reset in Microsoft Entra ID</li> <li>Implement multi-factor authentication</li> </ul> <h3>15 - Enable organizational access</h3> <ul> <li>Enable access to organization resources</li> <li>Explore VPN types and configuration</li> <li>Explore Always On VPN</li> <li>Deploy Always On VPN</li> </ul> <h3>16 - Implement device compliance</h3> <ul> <li>Protect access to resources using Intune</li> <li>Explore device compliance policy</li> <li>Deploy a device compliance policy</li> <li>Explore conditional access</li> <li>Create conditional access policies</li> </ul> <h3>17 - Generate inventory and compliance reports</h3> <ul> <li>Report enrolled devices inventory in Intune</li> <li>Monitor and report device compliance</li> <li>Build custom Intune inventory reports</li> <li>Access Intune using Microsoft Graph API</li> </ul> <h3>18 - Deploy device data protection</h3> <ul> <li>Explore Windows Information Protection</li> <li>Plan Windows Information Protection</li> <li>Implement and use Windows Information Protection</li> <li>Explore Encrypting File System in Windows client</li> <li>Explore BitLocker</li> </ul> <h3>19 - Manage Microsoft Defender for Endpoint</h3> <ul> <li>Explore Microsoft Defender for Endpoint</li> <li>Examine key capabilities of Microsoft Defender for Endpoint</li> <li>Explore Windows Defender Application Control and Device Guard</li> <li>Explore Microsoft Defender Application Guard</li> <li>Examine Windows Defender Exploit Guard</li> <li>Explore Windows Defender System Guard</li> </ul> <h3>20 - Manage Microsoft Defender in Windows client</h3> <ul> <li>Explore Windows Security Center</li> <li>Explore Windows Defender Credential Guard</li> <li>Manage Microsoft Defender Antivirus</li> <li>Manage Windows Defender Firewall</li> <li>Explore Windows Defender Firewall with Advanced Security</li> </ul> <h3>21 - Manage Microsoft Defender for Cloud Apps</h3> <ul> <li>Explore Microsoft Defender for Cloud Apps</li> <li>Planning Microsoft Defender for Cloud Apps</li> <li>Implement Microsoft Defender for Cloud Apps</li> </ul> <h3>22 - Assess deployment readiness</h3> <ul> <li>Examine deployment guidelines</li> <li>Explore readiness tools</li> <li>Assess application compatibility</li> <li>Explore tools for application compatibility mitigation</li> <li>Prepare network and directory for deployment</li> <li>Plan a pilot</li> </ul> <h3>23 - Deploy using the Microsoft Deployment Toolkit</h3> <ul> <li>Evaluate traditional deployment methods</li> <li>Set up the Microsoft Deployment Toolkit for client deployment</li> <li>Manage and deploy images using the Microsoft Deployment Toolkit</li> </ul> <h3>24 - Deploy using Microsoft Configuration Manager</h3> <ul> <li>Explore client deployment using Configuration Manager</li> <li>Examine deployment components of Configuration Manager</li> <li>Manage client deployment using Configuration Manager</li> <li>Plan in-place upgrades using Configuration Manager</li> </ul> <h3>25 - Deploy Devices using Windows Autopilot</h3> <ul> <li>Use Autopilot for modern deployment</li> <li>Examine requirements for Windows Autopilot</li> <li>Prepare device IDs for Autopilot</li> <li>Implement device registration and out-of-the-box customization</li> <li>Examine Autopilot scenarios</li> <li>Troubleshoot Windows Autopilot</li> </ul> <h3>26 - Implement dynamic deployment methods</h3> <ul> <li>Examine subscription activation</li> <li>Deploy using provisioning packages</li> <li>Use Windows Configuration Designer</li> <li>Use Microsoft Entra join with automatic MDM enrollment</li> </ul> <h3>27 - Plan a transition to modern endpoint management</h3> <ul> <li>Explore using co-management to transition to modern endpoint management</li> <li>Examine prerequisites for co-management</li> <li>Evaluate modern management considerations</li> <li>Evaluate upgrades and migrations in modern transitioning</li> <li>Migrate data when modern transitioning</li> <li>Migrate workloads when modern transitioning</li> </ul> <h3>28 - Manage Windows 365</h3> <ul> <li>Explore Windows 365</li> <li>Configure Windows 365</li> <li>Administer Windows 365</li> </ul> <h3>29 - Manage Azure Virtual Desktop</h3> <ul> <li>Examine Azure Virtual Desktop</li> <li>Explore Azure Virtual Desktop</li> <li>Configure Azure Virtual Desktop</li> <li>Administer Azure Virtual Desktop</li> </ul></div><div id="course-pills-3"><h4>Additional course details:</h4><br /><p>Nexus Humans MD-102T00 : Microsoft 365 Endpoint Administrator training program is a workshop that presents an invigorating mix of sessions, lessons, and masterclasses meticulously crafted to propel your learning expedition forward. </p><p></p> This immersive bootcamp-style experience boasts interactive lectures, hands-on labs, and collaborative hackathons, all strategically designed to fortify fundamental concepts. <p></p>Guided by seasoned coaches, each session offers priceless insights and practical skills crucial for honing your expertise. Whether you're stepping into the realm of professional skills or a seasoned professional, this comprehensive course ensures you're equipped with the knowledge and prowess necessary for success.  <p></p>While we feel this is the best course for the MD-102T00 : Microsoft 365 Endpoint Administrator course and one of our Top 10 we encourage you to read the course outline to make sure it is the right content for you.  <p></p>Additionally, private sessions, closed classes or dedicated events are available both live online and at our training centres in Dublin and London, as well as at your offices anywhere in the UK, Ireland or across EMEA.<p></p></div>

Microsoft 365

Microsoft AZ-104

MD-102T00 Microsoft 365 Endpoint Administrator

<div id="course-pills-1">Duration<p>2 Days</p><p>12 CPD hours</p>This course is intended for<p>This class has something for everything, from beginners who wish to customise their data entry forms in SharePoint right up to advanced users who need to use advanced formulas to deliver more bespoke actions to their apps.</p>Overview<p>After taking this course, students will be able to: - Understand when to use PowerApp. - Describe the components of PowerApps and their correct use. - Create PowerApps from existing data sources. - Brand PowerApps. - Customize PowerApps beyond just using the automated wizards. - Connect to a range of data sources from Excel to Azure SQL. - Understand the difference between canvas apps and model-driven apps. - Integrate PowerApps with other Office 365 systems ? including Teams and SharePoint Online. - Administer and Maintain PowerApps</p><p>Students will be taught how to design, test and publish new apps that work with a variety of data sources. We will take users through a selection of well-crafted lessons to help them build new applications for their business.</p></div><div id="course-pills-2"><h3>1 - AN INTRODUCTION TO POWERAPPS</h3> <ul> <li>What is PowerApps?</li> <li>The benefits of apps</li> <li>How to get PowerApps</li> <li>Canvas Apps and Model-Driven Apps</li> <li>License Options and Costs</li> <li>Discover PowerApps with Templates</li> <li>Lab 1: Introduction to PowerApps</li> </ul> <h3>2 - GETTING STARTED WITH POWERAPPS</h3> <ul> <li>Building a new app from a data source</li> <li>Add, edit and remove controls</li> <li>Intro to Formulas</li> <li>Testing an app</li> <li>App Settings</li> <li>Publish and Share Apps</li> <li>Version History and Restore</li> <li>PowerApps Mobile App</li> <li>Lab 1: Getting Started</li> </ul> <h3>3 - BRANDING AND MEDIA</h3> <ul> <li>Less is more</li> <li>Duplicate Screens</li> <li>Fonts</li> <li>Screen Colours and Matching Colours</li> <li>Screen Backgrounds</li> <li>Buttons and Icons</li> <li>Hide on Timer</li> <li>Size and Alignment by reference</li> <li>Show and Hide on Timer</li> <li>Lab 1: Branding and Media</li> </ul> <h3>4 - POWERAPPS CONTROLS</h3> <ul> <li>Text Controls for Data Entry and Display</li> <li>Controls ? Drop downs, combo box, date picker, radio button and more</li> <li>Forms ? Add and edit data in underlying data sources quickly</li> <li>Charts ? present information in pie, line and bar charts</li> <li>Lab 1: Build Apps from Blank</li> </ul> <h3>5 - DATA SOURCES AND LOGIC</h3> <ul> <li>Data Storage and Services</li> <li>How do I decide which database to use?</li> <li>Connect to on-premises data - Gateway</li> <li>What is Delegation?</li> <li>Specific Data Examples</li> <li>Displaying Data</li> <li>Lab 1: Data Source and Logic</li> </ul> <h3>6 - MODEL-DRIVEN APPS</h3> <ul> <li>What is a model-driven app?</li> <li>Where will my data be stored?</li> <li>How do create a model-driven app</li> <li>Canvas vs model-driven summary</li> <li>Lab 1: Model-Driven App</li> </ul> <h3>7 - POWERAPP INTEGRATION</h3> <ul> <li>Embed PowerApps in Teams</li> <li>Embed PowerApps in SharePoint Online</li> <li>Start a Flow from a PowerApp</li> <li>Lab 1: PowerApp Integration</li> </ul> <h3>8 - ADMINISTRATION AND MAINTENANCE OF POWERAPPS</h3> <ul> <li>Identify which users have been using PowerApps</li> <li>Reuse an app in another location (move from testing or development to production)</li> <li>Review app usage</li> <li>Prevent a user from using PowerApps</li> <li>Manage environments</li> <li>Lab 1: Administration and Maintenance</li> </ul></div><div id="course-pills-3"><h4>Additional course details:</h4><br /><p>Nexus Humans 55265 Microsoft PowerApps training program is a workshop that presents an invigorating mix of sessions, lessons, and masterclasses meticulously crafted to propel your learning expedition forward. </p><p></p> This immersive bootcamp-style experience boasts interactive lectures, hands-on labs, and collaborative hackathons, all strategically designed to fortify fundamental concepts. <p></p>Guided by seasoned coaches, each session offers priceless insights and practical skills crucial for honing your expertise. Whether you're stepping into the realm of professional skills or a seasoned professional, this comprehensive course ensures you're equipped with the knowledge and prowess necessary for success.  <p></p>While we feel this is the best course for the 55265 Microsoft PowerApps course and one of our Top 10 we encourage you to read the course outline to make sure it is the right content for you.  <p></p>Additionally, private sessions, closed classes or dedicated events are available both live online and at our training centres in Dublin and London, as well as at your offices anywhere in the UK, Ireland or across EMEA.<p></p></div>

<div id="course-pills-1">Duration<p>3 Days</p><p>18 CPD hours</p>This course is intended for<p>The primary audience for this course is someone who works, or has ambition to work, in a leadership role in data center operations such as a data center facilities manager, data center operations manager, who has the responsibility to achieve and improve the high-availability and manageability of the data center operations.</p>Overview<p>After completion of the course the participant will be able to:<br />Perform the needs analysis translating business requirements to data center services<br />Set-up and manage the data center operations team<br />Implement and monitor safety- and security practices<br />Identify a suitable maintenance program for the data center facility and its equipment<br />Select the appropriate policies and procedures required for data center operations<br />Monitor the data center availability, capacity and capability<br />Manage and implement basic data center projects<br />Set-up and implement an environmental sustainability program<br />Select an appropriate back-up site to support organizational resilience<br />Identify and respond to risk in the data center<br />Manage and support the document life cycle<br />Create a basic budget proposal<br />Select and manage vendors and measure their performance<br />Manage data center assets</p><p>Managing the facilities of today?s high-end and high-availability data centers is an extremely demanding and complex task which is often underestimated. There is often very little appreciation and understanding of the complexities of managing today's mission-critical data centers where downtime is not an option, especially since many of the data centers are operating at, or near, their design limits. Operations management at the facilities layer makes all the difference. Even a data center designed to the highest redundancy level as per the ANSI/TIA-942 standard could still experience many unscheduled downtime events due to poor planning, operations, maintenance and management processes.</p></div><div id="course-pills-2"><h4>Service Level Management</h4><ul><li>Service Level Management</li><li>Needs analysis</li><li>Capability assessment</li><li>Service portfolio</li><li>Service catalogue</li><li>Service Level Agreements (SLAs)</li><li>Availability measurement</li><li>Data points in SLA</li><li>Service reporting</li><li>Complaint procedure</li><li>Customer satisfaction measurement</li><li>Service Improvement Process (SIP)</li><li>SLA content</li></ul><h4>The Data Center Organization</h4><ul><li>Operational issues</li><li>Organization chart</li><li>Roles and responsibilities</li><li>Skills matrix</li><li>Contingency / backup roles</li><li>Shift management</li><li>Performance management</li><li>Career development</li><li>Training and assessment</li><li>Job rotation</li><li>Succession planning</li><li>Disciplinary program</li></ul><h4>Managing Safety &amp; Statutory Requirements</h4><ul><li>Safety policies and regulations</li><li>Occupational Health and Safety (OH&amp;S)</li><li>Safety awareness training</li><li>Permit to Work (PTW)</li><li>Lock-out / Tag-out</li><li>Personal Protective Equipment (PPE)</li><li>Testing and tagging of equipment</li><li>Emergency preparedness and response</li><li>Reporting of safety issues</li><li>Reviews / internal audit / external audit</li></ul><h4>Managing Physical Security</h4><ul><li>Security policies and procedures</li><li>Security standards and guidelines</li><li>Security staff</li><li>Security awareness</li><li>Security incident management</li><li>Disciplinary program</li><li>Reviews, internal and external audits</li></ul><h4>Facilities Management</h4><ul><li>Maintenance policies and procedures</li><li>Various maintenance programs</li><li>Outsourcing of maintenance activities</li><li>Maintenance contract options</li><li>Warranty</li><li>Maintenance schedule</li><li>Service situations</li><li>Spart part management</li><li>Contamination control</li></ul><h4>Data Center Operations</h4><ul><li>Policies and procedures for data center operations</li><li>Service operations and the daily data center operations</li></ul><h4>Monitoring / Reporting / Control</h4><ul><li>Monitoring requirements</li><li>Escalation procedures</li><li>Reporting</li><li>Trend analysis</li><li>Reviews</li></ul><h4>Project Management</h4><ul><li>Project management</li><li>Project organization</li><li>Project manager</li><li>Project phases</li></ul><h4>Environment Sustainability</h4><ul><li>The importance of sustainability</li><li>Sustainability policies </li><li>Environmental management </li><li>Power efficiency indicators -</li><li>Waste management -</li><li>Water management</li><li>ICT utilisation management </li><li>Environmental performance measurements</li><li>Renewable energy factor (REF)</li></ul><h4>Organizational Resilience</h4><ul><li>Business continuity</li><li>Data center facility options</li><li>Business Impact Analysis</li><li>Type of facility</li><li>Human resources</li><li>Facility, equipment and consumables</li></ul><h4>Governance, Risk and Compliance</h4><ul><li>Management commitment</li><li>Coordination, collaboration and integration</li><li>Compliance</li><li>Risk management</li><li>Document management</li><li>Financial management</li><li>Vendor management</li><li>Asset management</li></ul></div><div id="course-pills-3"><h4>Additional course details:</h4><br /><p>Nexus Humans Certified Data Center Facilities Operations Manager (CDFOM) training program is a workshop that presents an invigorating mix of sessions, lessons, and masterclasses meticulously crafted to propel your learning expedition forward. </p><p></p> This immersive bootcamp-style experience boasts interactive lectures, hands-on labs, and collaborative hackathons, all strategically designed to fortify fundamental concepts. <p></p>Guided by seasoned coaches, each session offers priceless insights and practical skills crucial for honing your expertise. Whether you're stepping into the realm of professional skills or a seasoned professional, this comprehensive course ensures you're equipped with the knowledge and prowess necessary for success.  <p></p>While we feel this is the best course for the Certified Data Center Facilities Operations Manager (CDFOM) course and one of our Top 10 we encourage you to read the course outline to make sure it is the right content for you.  <p></p>Additionally, private sessions, closed classes or dedicated events are available both live online and at our training centres in Dublin and London, as well as at your offices anywhere in the UK, Ireland or across EMEA.<p></p></div>

831 Nexus courses delivered Online

AJSEC - Advanced Junos Security

By Nexus Human

F5 Configuring BIG-IP APM - Access Policy Manager v13.x

By Nexus Human

Implementing and Configuring Meraki Technologies v1.0 (ICMT - CT)

By Nexus Human

Adobe Captivate 2019 - Beyond The Essentials

By Nexus Human

Spring Boot Quick Start | Core Spring, Spring AOP, Spring Boot 2.0 and More (TT3322)

By Nexus Human

Introduction to Premiere Pro CC

By Nexus Human

BA17 - Advanced Root Cause Analysis

By Nexus Human

Android Studio Development Essentials

By Nexus Human

Turbocharge Your Code! Generative AI Boot Camp for Developers (TTAI2305)

By Nexus Human

Security in Google Cloud

By Nexus Human