10321 MOT courses

The School of Sales: Master Strategic Communication, Build Rapport, Overcome Fear & Ego, and Close Any Deal. Transform your career with Noah Laguda’s proven techniques and insights sales leadership training elevate results personal development motivation never give up

Essential OTN training course description An In-depth introduction to the terminology and technology that will comprise tomorrow's Optical Transport Networks. What will you learn Describe the problems with old technologies. Identify the purpose of new technologies. Describe the functionality of the various transmission mediums available Identify OTN features and functionality. Define the issues involved in equipment and application rollout. Essential OTN training course details Who will benefit: Anyone wishing to learn OTN. Prerequisites: SDH foundation or Essential DWDM Duration 2 days Essential OTN training course contents Scope, References Terms and definitions, Abbreviations and Conventions Optical transport network interface structure Multiplexing/mapping principles and bit rates Optical transport module (OTM-n.m, OTM-nr.m, OTM-0.m and OTN 0.mvn) Physical specification of the ONNI Optical channel (OCh) Optical channel transport unit (OTU) Optical channel data unit (ODU) Optical channel payload unit (OPU) OTM overhead signal (OOS) Overhead description and maintenance signals Mapping of client signals and concatenation Mapping ODUk signals into the ODTUjk signal Forward error correction using 16-byte interleaved RS (255,239) codecs ODUk tandem connection monitoring (TCM) overhead OPUk Multiplex Overhead Amendment 2 including: OTN Multiplexing and Mapping, Basic signal structure, ODTU12, ODTU13, ODTU23, OPUk Multiplex Overhead, OPUk Multiplex Structure Identifier (MSI). OPU2 Multiplex Structure Identifier (MSI), OPU3 Multiplex Structure Identifier (MSI), OPUk Payload Structure Identifier Reserved overhead (RES), ODU1 into ODU2 multiplexing, ODU2 into ODU3 multiplexing, ODU1 into ODU3 multiplexing Amendment 3 including: 40 Gbit/s ODU3/OTU3 and 100 Gbit/s ODU4/OTU4, Support of gigabit Ethernet services via ODU0, ODU2e, ODU3 and ODU4, ODU0 and ODUFlex, Multi-lane OTU3 and OTU4 interfaces, Support for InfiniBand Amendment 4 including: OTSn OTN synchronization messaging channel (OSMC) overhead, FC-1600 Amendment 5 Including: ODUk.ts, OTU0LL (OTU0 low latency), OTSiA (optical tributary signal assembly). OTSiG (optical tributary signal group), OTSiG-O (optical tributary signal overhead), CMEP (connection monitoring end- point), CMOH (connection monitoring overhead), MOTU (Multi-OUT), MOTUm (Multi-OTU with management), OTUCn-M (Optical Transport Unit-Cn, with n OxUC overhead instances and 5G tributary slots). SOTU (Single-OUT). SOTUm (Single-OTU with management). Modified bit rates and capacity for OTU1/2/3/4 OTM.nr.m, OTM.n.m, OTM.0.3v4, OTM 0.4v4 Mapping of CBR2G5, CBR10G, CBR10G3 and CBR40G signals into OPUk 64B/66B and 513B block code format PCS lane alignment marker for 40GBASE-R and 100GBASE-R PT=20/PT=21 and AMP/GMP options OTL 4.10 to OTL 4.4 gearbox ODU switching and Line protection Schemes 10 x 10 MSA Overview of current and future coherent and noncoherent technologies 40Gbit and 100Gbit compliant ROADM's Implementers Guide including replacement terms. Differing vendor's equipment and their implementations Individual and group planning exercises: Upgrade a customer STM-64/10G network to a 40G/ OTN network. Upgrade a customer old 16 Wavelength WDM network to be OTN compliant. Implement a new customer 40 wavelength OTU3 OTN compliant MSPP (DWDM) network. Design a cost-effective solution where we can hand over circuits using 'Optical Transport Lanes'.

Successful communications are all about making the message as simple as possible – but this can be difficult when the subjects we're talking about are inherently complicated.  Academic institutions, tech companies, health organisations, charities and many others have complex ideas, processes and systems at the heart of what they do.  This course is for anybody who needs to distill information down into key messages for important stakeholders, funders and investors, decision makers and members of the public.  You’ll learn proven techniques for grabbing attention and changing minds through presentations and public speaking, infographics and data visualisations, and written reports and online posts.  We’ll work with you before the course to ensure that we understand your organisation and what you’re hoping to achieve. Sample learning content Session 1: Understanding your audience Matching your objectives to your audience's motivations. Identifying the right tone and language. Understanding how, where and when your audience wants to be spoken to. Session 2: Refining your objectives  Breaking down strategic aims into tactical steps Metrics and milestones: defining and measuring progress and success. Rapidly building a brief for your communications. Session 3: Telling the story  Using metaphors, visuals, comparisons to frame your narrative. From slide decks to online campaigns - choosing the right formats for delivering your message. Selecting communications channels to maximise reach and impact. Session 4: Keeping it going  Processes and systems for launching and maintaining communications campaigns. Building social proof – creating and curating content. Troubleshooting and preparing for common challenges. Delivery We deliver our courses over Zoom, to maximise flexibility. The training can be delivered in a single day, or across multiple sessions. All of our courses are live and interactive – every session includes a mix of formal tuition and hands-on exercises. To ensure this is possible, the number of attendees is capped at 16 people.  Tutor Alan Rutter is the founder of Fire Plus Algebra. He is a specialist in communicating complex subjects through data visualisation, writing and design. He teaches for General Assembly and runs in-house training for public sector clients including the Home Office, the Department of Transport, the Biotechnology and Biological Sciences Research Council, the Health Foundation, and numerous local government and emergency services teams. He previously worked with Guardian Masterclasses on curating and delivering new course strands, including developing and teaching their B2B data visualisation courses. He oversaw the iPad edition launches of Wired, GQ, Vanity Fair and Vogue in the UK, and has worked with Condé Nast International as product owner on a bespoke digital asset management system for their 11 global markets. Testimonial “We’ve now worked with Alan for almost 3 years, and during that time he has continued to deliver the highest quality training for our clients and delegates. Alan’s passionate delivery style has continued to deliver innovative training solutions to over 1500 delegates across the public, private and voluntary sector. Each of our courses with him has always delivered exceptional feedback and satisfaction levels.” Joe Barlow | Head of Programme, Understanding ModernGov

Duration 3 Days 18 CPD hours This course is intended for CxO?s IT Managers/ Directors Senior Project Officers Project & Program Coordinator/Managers Operations Managers Quality Managers Business Analysts Engineering Managers IT Infrastructure Managers Internal Consultants Professional Consultants Overview Change and the individual Change and the organization Communication and stakeholder engagement Change practice Dealing with change and more importantly, the impact of change is a high priority for all organisations. The Change Management Certification has been developed by APMG in partnership with the Change Management Institute (CMI), an independent, global professional association of change managers. Together they have developed a professional ?body of knowledge? for the discipline of change management. This body of knowledge now provides an independent benchmark for the professional knowledge expected of an effective change manager. APMG?s refreshed Change Management certification is fully aligned with the change management body of knowledge. Prerequisites There is no prerequisite to attending this foundation course, although it is recommended that candidates should have a good understanding of business practices. 1 - Change and the Organization Drivers for change Developing a vision Culture and climate Emergent change and lifecycle Organizational metaphors Models of change Roles required for change 2 - Stakeholders Principles Identification Analysis Influencing and listening Emotion and demonstration Communications Cognitive biases Remaining people focused Improving Communications Communications channels Collaboration Communications Planning Larger workshops 2 - Change Impact Assessing impact McKinsey 7 S Stakeholder impact assessment Assessing change readiness Large change ? how to staff Building a change team Preparing for resistance Building team effectiveness 4 - Individual Change Learning theory Motivation Change Curve Personality differences

Five half-day Leadership modules with mini work placed projects to bring the learning into action in the workplace.

Providing evidence-based knowledge across five major areas, NASM’s revolutionary Certified Wellness Coach course dives into unique systematic processes to guide, support, and motivate clients to make lasting lifestyle changes. Through movement (fitness), nutrition, mental and emotional wellbeing, recovery and regeneration, and coaching, NASM’s Certified Wellness Coach course teaches you to help clients achieve positive behavior change with long-term values. This immersive health and wellness coach experience empowers you to apply a holistic approach to wellness in a variety of real-world scenarios. With actionable guidance from experts, this innovative platform creates an instructional environment that’s fun, engaging, and unique for your future as a health and wellness coach. From podcast-style interviews to a coaching simulation that helps you visualize potential client hurdles, you’ll get a thorough understanding of what’s needed to meet your clients’ goals alongside them. Guide your clients through whole-body practices as you work to create that wellness experience they are looking for.

This PLC-TIEM training course is aimed at personnel who already have some general experience of TIEM but who wish to learn the idiosyncrasies of a specific model or modify and expand existing programme codes. Digital input wiring (Sink/Source) Digital output wiring (Relay/Transistor) Analog input wiring (0-10V/4-20ma/RTD/Thermocouple/loadcell) Analog output wiring (0-10v/4-20mA) Inverter wiring Valve wiring Motor wiring Sensor wiring Fault finding Troubleshooting Please do not confuse us with cheap imitation courses, we offer first class PRACTICAL training using state of the art PLC systems and the latest software. These PLC’s have been carefully selected to match the latest current trends in industry, to match what industry is using. We DO NOT use simulator software, our training is very much hands on, allowing you the confidence when completing the course to work in the real world. You cannot gain this with simulators. Presently 90% of the industry run with Siemens S7 1200 PLC Why learn on something which isn’t used in the real world? Don’t get ridiculed in the real world, by having unusable theoretical skills. ALL our trainers are industry leaders, who are time served, experienced and highly qualified in the subject field, with a minimum of 20 years each in the industry. We can accommodate most makes of PLC’s, however, if you are new to the industry, we would HIGHLY recommend learning on the major players first using real PLC’s, real software and real training rigs. We are the ONLY accredited centre to also offer industry recognised, City & Guilds qualifications in PLC, which is run in tandem to the EAL qualification. We are ISO 9001, ISO 14001 and OSHAS 18001 approved. This is testament to our ongoing investment and the quality of training we provide

Based on our extensive work and experience with leaders, both in the private and public sectors, this ILM Level 5 Coaching and Mentoring programme has been designed to develop the capability of leaders to positively impact the performance of individuals and teams. We are experts at unlocking peak performance. Coaching and mentoring improves relationships, performance and engagement. This programme has been created to sharpen a leader's skills - enabling them to balance control, commitment and empowerment through productive conversations with individuals and teams. Scroll down to find out more about this ILM Level 5 qualification, or use the buttons below to jump straight to the scheduled course dates and prices. All of our ILM Programmes are provided in partnership with The BCF Group, which is the ILM Approved Centre we deliver under. Course Syllabus The syllabus of the ILM Level 5 Qualification in Business Coaching and Mentoring is comprised of six modules, covering the following: Module OneIntroduction 1.1) Explore the myths 1.2) What is coaching and mentoring? 1.3) What is business coaching? 1.4) Thoughts and perceptions 1.5) 7 competencies of a coach 1.6) Definitions - Mentoring / Consulting / Coaching / Therapy / Counseling Module TwoModels and Practice 2.1) The Wheel of Life 2.2) Johari's Window 2.3) KASH - Knowledge, Attitude, Skills, Habits of an effective coach 2.4) STAR / GROW model 2.5) Effective use of Paradigm cards 2.6) Practice and feedback Module ThreeBuilding the Relationship 3.1) Self-management 3.2) How motivation works 3.3) Personality & behavioural traits 3.4) Rapport and trust Module FourCommunication and Practice 4.1) Non-verbal communication 4.2) Effective communication 4.3) Questioning through 2nd/3rd/4th level questioning 4.4) Building a bank of coaching questions 4.5) Practice and feedback Module FiveStructure 5.1) Introduction 5.2) The coaching cycle 5.3) How to give feedback 5.4) The COMET model 5.5) Executive coaching 5.6) Psychometrics 5.7) Closing the coaching session Module SixWell-Formed Outcomes 6.1) Challenge and focus steps 6.2) Coaching goals 6.3) Establishing the gap analysis 6.4) Using diagnostic tools 6.5) SMART objectives 6.6) Designing & planning focus steps 6.7) Gaining commitment 6.8) Practice and feedback Who is it for? Business coaching is the skill to have in today's rapidly changing business climate. People and team development through business coaching is fast, efficient and cost effective, and will get you measurable results. The ILM Level 5 Qualifications in Business Coaching and Mentoring are highly accessible and have been designed for all tiers of director, management and supervisory level, or indeed anyone involved in people development. With a business-relevant, tried-and-tested approach, we encourage participants to bring live business issues and case histories with them on the course. Accreditation Upon completion of this programme all attendees will receive the 'ILM Endorsed Programme in Business Coaching & Mentoring' certificate. Participants will also be eligible to receive ILM letters after their name; either AMInstLM (Affiliate/Associate Member Institute Leadership & Management) or MInstLM (Member Institute Leadership & Management). As with all ILM Accredited Programmes, participants will need to complete the post-programme activity in order to achieve their full 'ILM Level 5 Certificate in Coaching and Mentoring in Management' certificate. These elements have been designed in order to show to the Institute of Leadership and Management (ILM) that you are able to put the skills and techniques learned on the programme into practice. Full support and guidance is provided for completing these final elements. Required Activities Pre-Course We ask you to come prepared with issues which you are currently experiencing that you would be happy to discuss and be coached on. We also send out a short document containing questions and exercises which will help our coaches understand you better and work with you in order to receive the best training. Post-Course To achieve this ILM qualification, participants will have to complete the following post-course activities: 3 x work-based assignments need to be completed within 1 year from attendance and registration. Embedded in the assignments, the Certificate will require delegates to complete 18 hours of coaching or mentoring activity with 2-3 people. The Diploma will require delegates to complete 54 hours of coaching or mentoring with 4-9 people. Tutor guided learning will take on the format of book and video reviews with ongoing tutor guidance and support via phone, Skype or face-to-face. Optional: Self-initiated 2 x 45 min executive coaching sessions per delegate to offer a coaching best practice view. Course Material Each participant will be issued with a workbook to assist them both during and after the course, which will contain information, guidance and forms to assist with the coaching sessions. Participants will also complete a Paradigm psychometric report and receive a year's membership with the Institute of Leadership & Management (ILM). In-House & Classroom Courses Available Online We have developed an alternative to traditional face-to-face training that continues to provide a full learning experience, and allows delegates to learn effectively whilst self-isolating from home. This is how it looks: Delegates booked on Classroom and In-House courses will continue to have access to their trainer online throughout the days that the course is booked to run. Prior to a delegate's course start date, they will be enrolled on our e-learning platform (in partnership with BCF Group) for the course they are booked on to. They will also be given contact information for their trainer, and details of how to access the online workshops. Delegates will not require any special IT equipment. A desktop computer, laptop, tablet, or a mobile phone with internet and audio capability is all that is required. Delegates taking ILM Qualifications will then proceed to the book review, video review and work based assignments with 12 months tutor support as appropriate, and in line with our previous arrangements. We hope you agree that this blended learning experience represents the safest way to continue supporting our clients and delegates during the Coronavirus disruption. Scheduled Courses Classroom Course - Nottingham (NG12 4DG) Classroom training courses enable you to benefit from having the tutor and other delegates right there in the room with you. Face-to-face training sessions are one of the best ways to learn, as it is easy to ask questions and have group discussions. In addition to the 2 days in the classroom, delegates will need to undertake self-directed learning and 3 work-based assignments. As a guide, this is estimated to take 3 hours per week for 12 months. Diploma: £2,195 + vat | Certificate: £1,895 + vat 03-04 October 2023 22-23 February 2024 Classroom Course - Reading (RG41 5QS) Classroom training courses enable you to benefit from having the tutor and other delegates right there in the room with you. Face-to-face training sessions are one of the best ways to learn, as it is easy to ask questions and have group discussions. In addition to the 2 days in the classroom, delegates will need to undertake self-directed learning and 3 work-based assignments. As a guide, this is estimated to take 3 hours per week for 12 months. Diploma: £2,195 + vat | Certificate: £1,895 + vat 14-15 September 2023 14-15 December 2023 14-15 March 2024 Zoom™ Course Attending a course via Zoom videoconferencing gives you all of the benefits of classroom training without the need to leave your home or office. You still benefit from a real tutor facilitating the programme, and the content is exactly the same. The only difference is that we split the course into four half-day sessions to make it easier on your eyes! Diploma: £1,795 + vat | Certificate: £1,495 + vat September 2023 - 25th Sep (morning), 25th Sep (afternoon), 26th Sep (morning), 26th Sep (afternoon) November 2023 - 6th Nov (morning), 6th Nov (afternoon), 7th Nov (morning), 7th Nov (afternoon) January 2024 - 11th Jan (morning), 11th Jan (afternoon), 12th Jan (morning), 12th Jan (afternoon) March 2024 - 11th Mar (morning), 11th Mar (afternoon), 12th Mar (morning), 12th Mar (afternoon) May 2024 - 14th May (morning), 14th May (afternoon), 15th May (morning), 15th May (afternoon) July 2024 - 9th Jul (morning), 9th Jul (afternoon), 10th Jul (morning), 10th Jul (afternoon Dickson Training Ltd Founded in 1985 in Yorkshire, we have built an impressive and loyal client base. Our partnerships are built by consistently delivering outstanding development solutions and working in close collaboration with our clients, resulting in us becoming a leading UK and international training provider.

Enhance your knowledge on CO2 capture and processing technologies with EnergyEdge's virtual instructor-led training course. Sign up now!

Discover the secrets of successful carbon capture and storage (CCS) project risk management through EnergyEdge's virtual instructor-led training (VILT). Join us and become an expert today!