• Professional Development
  • Medicine & Nursing
  • Arts & Crafts
  • Health & Wellbeing
  • Personal Development

104 Mechanic courses in Glasgow delivered Live Online

F-Gas 3 Day

4.7(1243)

By Technique Learning Solutions

Any person who requires the minimum legal requirement to work on air conditioning and refrigeration equipment including air conditioning and refrigeration engineers and technicians, all plant engineers, apprentices, personnel concerned with the recovery, charging or disposal of refrigerants and new comers into the industry. F Gas Regulations training courses are designed for both experienced air-conditioning and refrigeration engineers and also candidates who are looking to cross train and gain qualifications in the air conditioning / refrigeration sector. This F Gas regulations qualification is to meet the legal requirements of EC Regulation 842/2006 (commonly known as the F Gas Regulations). The Certification Schemes are designed for operatives who install, service and repair refrigeration, air-conditioning and heat pump systems, and require the following skills: Safe handling of refrigerant techniques Pipework and Jointing skills Recovery of Refrigerants (restricted to small systems only) Intrusive and non-intrusive leak and performance checking Category 1 covers all aspects of installation, commissioning, servicing, maintenance, recovery and leak checking on all refrigeration, air-conditioning and heat pump systems in accordance with the F-Gas Regulation EC842/2006, regardless of the weight of refrigerant in the system. F Gas regulations Course subjects are: Pressure test and discharge to BSEN378 Charge a blended refrigerant Evaluate system performance to ensure competence (using rule of thumb, temperature, refrigerant state and pressure) Leak test to EC1516/2007 Fabricate and fit brazed and mechanical joints Uphold F-Gas records and log books. Handle refrigerant safely and dispose of rightfully Pressure Regulation compliance All candidates will be able to ensure systems are tight, efficient in their use of energy and meet the F-Gas legal requirement.

F-Gas 3 Day
Delivered in Clay Cross or Online + more
£500

Mechanic Training - Car & Bike Maintenance

By NextGen Learning

Course Overview This all-inclusive Mechanic Training – Car & Bike Maintenance course bundle is designed for those looking to build a strong foundation in vehicle servicing, maintenance, and diagnostics. Covering both two-wheelers and four-wheelers, this programme equips learners with essential knowledge across mechanical systems, fault detection, and routine upkeep. Whether you're looking to understand how engines operate, explore electrical and hybrid systems, or develop expertise in both traditional and modern vehicles, this training provides a diverse skill set tailored for today’s automotive industry. Upon completion, learners will have the theoretical knowledge to approach mechanical challenges confidently and pursue opportunities in various vehicle maintenance settings. With a structured curriculum and recognised certification, this course opens the door to a range of motor industry roles across garages, dealerships, and service centres. Course Description This comprehensive training package combines eight specialist courses that cover vital areas of automotive engineering and vehicle maintenance. Learners will explore key concepts in car and motorbike servicing, mechanical engineering, MET work, onboard diagnostics, and hybrid vehicle systems. The course also delves into bicycle maintenance and two-wheeler servicing to ensure a well-rounded understanding of all vehicle types. Each module is structured to guide learners through essential maintenance processes, diagnostic techniques, and component assessments. The learning experience is enriched with clear explanations, technical insights, and job-relevant scenarios. Whether preparing for a career in vehicle maintenance or aiming to broaden your automotive knowledge, this bundle offers a flexible and accessible route to developing industry-relevant skills. Learners will gain confidence in understanding engine systems, suspension setups, braking mechanisms, and electrical components essential for today’s automotive sector. Course Modules Module 01: Mechanical Engineering Module 02: Car Mechanic Training Module 03: Motorbike Maintenance Module 04: Bicycle Maintenance Course Module 05: Automotive Engineering: Onboard Diagnostics Module 06: MET Technician Module 07: Hybrid Vehicle Expert Training Module 08: Certificate Course In Two Wheeler Servicing (See full curriculum) Who is this course for? Individuals seeking to develop technical knowledge in vehicle maintenance. Professionals aiming to expand into multi-vehicle service roles. Beginners with an interest in automotive engineering or vehicle repair. Career changers looking to enter the motor industry. Career Path Car Mechanic Motorbike Technician MET Technician Diagnostic Specialist Hybrid Vehicle Specialist Bicycle Technician Automotive Service Advisor Vehicle Systems Analyst

Mechanic Training - Car & Bike Maintenance
Delivered OnlineFlexible Dates
£9.99

Pumps, Compressors, Turbines & Troubleshooting

By EnergyEdge - Training for a Sustainable Energy Future

About this Training Course This intermediate to advanced level 3 full-day training course has been designed to provide participants with a detailed and up-to-date overview of the fluid mechanic fundamentals and operating practice of pumps, compressors and gas and steam turbines. Upon the successful completion of this course, participants will have acquired the practical knowledge to enable them not only to choose the correct device for a particular application but also be in a position to resolve many commonly occurring operating problems. Troubleshooting is an important part of this course and will cover the important topics of Machinery Root Cause Failure Analysis (RCFA) together with Vibration Analysis. This course is ideal for those personnel in the oil, gas, petrochemical, chemical, power and other process industries who require a wider and deeper appreciation of pumps, compressors and turbines, including their design, performance and operation. The participants will be taken through an intensive primer of turbo-machinery principles, using the minimum of mathematics, and will learn how to solve the many and varied practical industrial problems that are encountered. The course makes use of an extensive collection of VIDEO material together with case studies and numerical exercises. Training Objectives Upon the successful completion of this course, each participant will be able to: Apply a comprehensive knowledge of pumps, compressors & turbines and troubleshoot rotating equipment in a professional manner Identify the different types of turbomachinery including basic design aspects and highlighted problem areas Minimise compressor work by understanding the processes involved and identifying their efficiency Understand the flow through turbomachines and the corresponding velocity triangles including torque and power calculations Analyse the different types of centrifugal machines including their design, installation, operation, maintenance, re-rate/retrofit, troubleshooting and control Recognise the various beneficial design aspects of turbomachines and understand the crucial process of cavitation Carry out proper methods of device installation, operation, maintenance and troubleshooting Understand and apply the powerful methods of Machinery Root Cause Failure Analysis Understand the various methods of vibration analysis applied to device diagnostics Target Audience This course provides an overview of all significant aspects and considerations of pumps, compressors and turbines for those who are involved in the design, selection, maintenance or troubleshooting of such equipment. This includes maintenance, reliability, integrity, engineering, production and operations managers, engineers and other technical staff. Course Level Intermediate Advanced Trainer Your expert course leader is a Senior Mechanical & Instrumentation Engineer (UK, B. Sc., M.Eng., Ph D) with over 45 years of industrial experience in Process Control & Instrumentation, Pumps, Compressors, Turbines and Control Valve Technology. He is currently a Senior Independent Consultant to various petrochemical industries in the UK, USA, Oman, Kuwait and KSA where he provides consultancy services on both the application and operational constraints of process equipment in the oil & gas industries. During his early career, he held key positions in Rolls Royce (UK) where he was involved in the design of turbine blading for jet engines, subject to pre-specified distributions of pressure. During this period and since, he has also been closely involved in various aspects of Turbomachinery, Thermodynamics and Fluid Mechanics where he has become a recognised authority in these areas. Later, he joined the academic staff of University of Liverpool in the UK as a Professor in Mechanical Engineering Courses. A substantial part of his work has been concerned with detailed aspects of Flowmetering - both of single & multiphase flows. He has supervised doctoral research students in this area in collaboration with various European flowmeter manufacturers. He joined Haward Technology Middle East in 2002 and was later appointed as European Manager (a post which has since lapsed) and has delivered over 150 training courses in Flowmeasurement (single- and multi-phase), Control, Heat Exchangers, Pumps, Turbines, Compressors, Valve and Valve Selection as well as other topics throughout the UK, USA, Oman and Kuwait. During the last two years, he has delivered courses with other training companies operating in the Far and Middle East. He has published about 150 papers in various Engineering Journals and International Conferences and has contributed to textbooks on the topics listed above. POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information post training support and fees applicable Accreditions And Affliations

Pumps, Compressors, Turbines & Troubleshooting
Delivered in Internationally or OnlineFlexible Dates
£2,665 to £3,099

TACR 20

4.7(1243)

By Technique Learning Solutions

Our intensive 10, 15 or 20 day Total Air Conditioning and Refrigeration training courses have been structured to meet the ever increasing demands on industry to meet safety, environmental and legal requirements regarding installation, commissioning, service and maintenance of both refrigeration and air conditioning systems including the electrical aspects of installation dependent upon course selection. The first 10 days of the Total Air Conditioning and Refrigeration training course are mechanical only, the following 5 or 10 days are the electrical aspects, depending on which route you need to go down. The Total Air Conditioning and Refrigeration training courses are accredited with the City & Guilds 2079, BESA Pipework and Brazing – (commercial), along with an EAL Unit* – Maintenance of Refrigeration Systems from the EAL Certificate in Engineering Technology (QCF) qualification. (*Practical elements will be covered during the course with a Project booklet to be completed by the student with an element of self-study after the course completion for us to claim the Unit certification from EAL). Our Total Air Conditioning and Refrigeration training courses are designed to be as practical as they possibly can be, with workshop time taking more than 70% of the course. During the Total Air Conditioning and Refrigeration training course, you will, install, repair, fault find, adapt and commission on a variety of different equipment, because we believe the way to learn is to do it!! With ALL our courses we offer unbiased technical support and access to a wealth of knowledge and information upon completion. Once you’ve completed your course with Technique, you can be assured that our service doesn’t end there…

TACR 20
Delivered in Clay Cross or Online + more
£500

TACR 15

4.7(1243)

By Technique Learning Solutions

Our intensive 10, 15 or 20 day Total Air Conditioning and Refrigeration training courses have been structured to meet the ever increasing demands on industry to meet safety, environmental and legal requirements regarding installation, commissioning, service and maintenance of both refrigeration and air conditioning systems including the electrical aspects of installation dependent upon course selection. The first 10 days of the Total Air Conditioning and Refrigeration training course are mechanical only, the following 5 or 10 days are the electrical aspects, depending on which route you need to go down. The Total Air Conditioning and Refrigeration training courses are accredited with the City & Guilds 2079, BESA Pipework and Brazing – (commercial), along with an EAL Unit* – Maintenance of Refrigeration Systems from the EAL Certificate in Engineering Technology (QCF) qualification. (*Practical elements will be covered during the course with a Project booklet to be completed by the student with an element of self-study after the course completion for us to claim the Unit certification from EAL). Our Total Air Conditioning and Refrigeration training courses are designed to be as practical as they possibly can be, with workshop time taking more than 70% of the course. During the Total Air Conditioning and Refrigeration training course, you will, install, repair, fault find, adapt and commission on a variety of different equipment, because we believe the way to learn is to do it!! With ALL our courses we offer unbiased technical support and access to a wealth of knowledge and information upon completion. Once you’ve completed your course with Technique, you can be assured that our service doesn’t end there…

TACR 15
Delivered in Clay Cross or Online + more
£500

TACR 10

4.7(1243)

By Technique Learning Solutions

Our intensive 10, 15 or 20 day Total Air Conditioning and Refrigeration training courses have been structured to meet the ever increasing demands on industry to meet safety, environmental and legal requirements regarding installation, commissioning, service and maintenance of both refrigeration and air conditioning systems including the electrical aspects of installation dependent upon course selection. The first 10 days of the Total Air Conditioning and Refrigeration training course are mechanical only, the following 5 or 10 days are the electrical aspects, depending on which route you need to go down. The Total Air Conditioning and Refrigeration training courses are accredited with the City & Guilds 2079, BESA Pipework and Brazing – (commercial), along with an EAL Unit* – Maintenance of Refrigeration Systems from the EAL Certificate in Engineering Technology (QCF) qualification. (*Practical elements will be covered during the course with a Project booklet to be completed by the student with an element of self-study after the course completion for us to claim the Unit certification from EAL). Our Total Air Conditioning and Refrigeration training courses are designed to be as practical as they possibly can be, with workshop time taking more than 70% of the course. During the Total Air Conditioning and Refrigeration training course, you will, install, repair, fault find, adapt and commission on a variety of different equipment, because we believe the way to learn is to do it!! With ALL our courses we offer unbiased technical support and access to a wealth of knowledge and information upon completion. Once you’ve completed your course with Technique, you can be assured that our service doesn’t end there…

TACR 10
Delivered in Clay Cross or Online + more
£500

F-Gas 5 Day

4.7(1243)

By Technique Learning Solutions

The F Gas Regulations course will suit any person who requires the minimum legal requirement to work on air conditioning and refrigeration equipment including air conditioning and refrigeration engineers and technicians, all plant engineers, apprentices, personnel concerned with the recovery, charging or disposal of refrigerants and new comers into the industry. F Gas Regulations training courses are designed for both experienced air-conditioning and refrigeration engineers and also candidates who are looking to cross train and gain qualifications in the air conditioning / refrigeration sector. This F Gas Regulations qualification is to meet the legal requirements of EC Regulation 842/2006 (commonly known as the F Gas Regulation). The Certification Schemes are designed for operatives who install, service and repair refrigeration, air-conditioning and heat pump systems, and require the following skills: Safe handling of refrigerant techniques Pipework and Jointing skills Recovery of Refrigerants (restricted to small systems only) Intrusive and non-intrusive leak and performance checking Category 1 covers all aspects of installation, commissioning, servicing, maintenance, recovery and leak checking on all refrigeration, air-conditioning and heat pump systems in accordance with the F-Gas Regulation EC842/2006, regardless of the weight of refrigerant in the system. Course subjects are: Pressure test and discharge to BSEN378 Charge a blended refrigerant Evaluate system performance to ensure competence (using rule of thumb, temperature, refrigerant state and pressure) Leak test to EC1516/2007 Fabricate and fit brazed and mechanical joints Uphold F-Gas records and log books. Handle refrigerant safely and dispose of rightfully Pressure Regulation compliance All candidates will be able to ensure systems are tight, efficient in their use of energy and meet the F-Gas legal requirement.

F-Gas 5 Day
Delivered in Clay Cross or Online + more
£500

The Mechanics of Mediumship Autumn

By The Psychic Medium Handbook

The Mechanics of Mediumship. A beginners guide to everything you need to know. How to become a professional psychic medium. Able to give short, accurate, evidential messages. This course runs over 5 weeks and during our time together we will explore five easy to follow parts. 1: What mediumship is and the different types, including your role as a professional medium and the differences between working in the psychic modality and when you are connected to spirit. 2: Activating and building your power within, and the difference between meditation, and attunement both to the spirit world and using your psychic modality. 3: The six different senses available to you, which are your strongest and whether you are perceiving them objectively or subjectively. 4: What is and what is not evidence in mediumship, understanding the different types of evidence available and defining practical and emotional evidence. 5: Surrendering to spirit, building confidence to receive specific unique information, and understanding the reasons why you receive a no response. Guidance on making positive, strong, statements filling your sitter with confidence, building a truly extraordinary professional reading.

The Mechanics of Mediumship Autumn
Delivered Online + more
£249

BUSINESS GRAMMAR & USAGE

5.0(4)

By Improving Communications Uk

KNOW THE RULES! POOR GRAMMAR SHOWS A LACK OF ATTENTION TO DETAIL AND ULTIMATELY CAN SLOW DOWN COMMUNICATIONS AS WELL AS PRODUCTIVITY. Business people who know grammar judge others based on their correct (or incorrect) usage. Be the professional who is able to be clear and correct in writing. Business Grammar & Usage: ENGLISH BOOT CAMP is the answer for today’s business competitive environment. Interactive instruction and collaboration with your fellow attendees means that you will master the skills and apply your new knowledge to the classroom exercises and activities. When you return to work, you’ll have new confidence about what is right and wrong, when it comes to writing. Attendees Will Be Able To: Know the Parts of Speech and their correct uses; Understand Sentence Structure, including applying rules for Subject-Verb and Pronoun-Antecedent Agreement; Be able to create Plurals and Possessives accurately and with certainty; Review and use the rules of Spelling, Mechanics (Capitalization, Abbreviation, Number Use), and Punctuation; Create original email / documents to employ newly-learned class material.   Online Format—Business Grammar and Usage is a 4-hour interactive virtual class for up to ten people. Register for this class and you will be sent ONLINE login instructions prior to the class date. It was great to have the opportunity to learn some new techniques and to gain more awareness of how I present myself. The most immediately applicable uses have been in reducing my “ums” and “ahs” and in trying to come to my point in a more succinct way. I’ve been cultivating this awareness in one-on-one settings; meetings and individual conversations. Christina Vargas

BUSINESS GRAMMAR & USAGE
Delivered Online
£316

The Mechanics of Mediumship Winter

By The Psychic Medium Handbook

The Mechanics of Mediumship. A beginners guide to everything you need to know. How to become a professional psychic medium. Able to give short, accurate, evidential messages. This course runs over 5 weeks and during our time together we will explore five easy to follow parts. 1: What mediumship is and the different types, including your role as a professional medium and the differences between working in the psychic modality and when you are connected to spirit. 2: Activating and building your power within, and the difference between meditation, and attunement both to the spirit world and using your psychic modality. 3: The six different senses available to you, which are your strongest and whether you are perceiving them objectively or subjectively. 4: What is and what is not evidence in mediumship, understanding the different types of evidence available and defining practical and emotional evidence. 5: Surrendering to spirit, building confidence to receive specific unique information, and understanding the reasons why you receive a no response. Guidance on making positive, strong, statements filling your sitter with confidence, building a truly extraordinary professional reading.

The Mechanics of Mediumship Winter
Delivered Online + more
£249

Educators matching "Mechanic"

Show all 1
Bike For Good Glasgow West

bike for good glasgow west

Scotland

Bike for Good is a charity and social enterprise which started in July 2010 in a small stall in Glasgow’s Barras market. With a few donated bikes, a cobbled-together tool kit and a team of volunteers with a huge amount of passion and drive, Bike for Good (then known as Glasgow Bike Shed) was born! We now have three thriving Community Hubs in Glasgow and an amazing team of 42 staff members and 50 + volunteers who are changing thousands of lives through cycling. We have a West Hub, a South Hub and a hub on Civic Street which you can read more about here. You can learn more about the members of our amazing team. Many of our wonderful volunteers have shared their experiences of working with Bike for Good through our online case studies. Bike for Good provides access to low cost but good quality bikes whilst diverting tonnes of waste from landfill. These bikes are kindly donated by members of the public and are then refurbished and sold in our two Community Hubs. Find out more about how to donate your bike. On average, our team of mechanics refurbish over 1000 bikes per year, diverting tonnes of waste from landfill while also providing access to affordable bikes to the public. Find out more about how to buy a refurbished bike. As well as the environmental impact of this work, the income from bike sales helps to fund our work in the community. To keep your bike in tip-top condition, our expert mechanics offer a comprehensive bike maintenance and repair service. The aim is to keep you cycling all year round. In addition, we offer a comprehensive programme of inclusive projects which promote, support and encourage greater levels of cycling. Cycling has a multitude of benefits for society, from environmental improvements to health promotion and financial savings. We have created a series of projects and services which seek to highlight this to the public and fill a gap in current provision. Our work is structured under three impact themes: Active Travel – promotes cycling as a sustainable form of transport through the delivery of: Refurbished bike sales and bike servicing Bike and e-bike loans Community Dr Bikes (pop up bike maintenance sessions) Maintenance classes Bike Buddies programme Weekly cycle training sessions E-cargo bike loans Confidence building led rides Extensive film and speaker event programme Skills and Development – improves the life chances of young people and adults who are not engaged in full time education or employment through the delivery of: Maintenance classes City and Guilds qualifications Build your own bike courses Fix your own bike sessions, including ones for young people Govanhill Gears Kids Club (led ride and learn to ride activities) Bespoke volunteering and development programme Women and non-binary specific maintenance programme Health and Wellbeing – improves the mental and physical wellbeing of people with long-term health conditions through the delivery of: 1:1 cycle confidence building sessions Weekly group rides Supporting partner organisations and participants to create their own cycling groups/hubs Providing an affordable transport option to those on a low income via reduced price Nextbike memberships Weekly women and non-binary specific cycle training sessions You can find out more about these services and how to access them through the Get a Bike, Repair a Bike, Get Cycling and Develop Your Skills pages. Recently we launched a subsidiary organisation (in partnership with Vélogik) called Motion Forward which provides business to business service and fleet maintenance. A share of the income from Motion Forward will help deliver our charitable work. vision, mission and values Our projects and services are all designed to help achieve our vision and mission: vision A healthy and inclusive environment where everyone in the community benefits from more people cycling. mission We enable people to ride a bike. We believe that cycling is the most effective and sustainable form of transport; we believe it enhances our chances for a healthy life and environment. values Passionate – We are passionate about cycling as a tool for positive change. Supportive – We work at the heart of communities, empowering people and building partnerships. To make this happen, we nurture a collaborative work environment. Environmentally aware – We protect and preserve the environment for the benefit of all. Expertise – We continuously develop our skills and share them with our volunteers and staff, and throughout the community.