3122 Management courses in Wetherby delivered Live Online

About this training course This 5 full-day course will cover all aspects of gas turbines, co-generation and combined cycle power plants. It will cover in detail all the components of these types of power plants such as: compressors, gas and steam turbines, heat recovery steam generators, deaerators, condensers, lubricating systems, instrumentation, control systems, and economics. The design, selection considerations, operation, maintenance, pay-back period, economics of co-generation plants and combined cycles, as well as, emission limits, reliability, monitoring and governing systems are also covered in detail. This course will also provide up-dated information in respect to all the significant improvements that have been made to co-generation and combined cycles power plants, during the last two decades. The course will illustrate through sophisticated computer simulation how gas turbines, co-generation and combined cycle plants perform under steady-state and transient conditions. In addition, the participants will learn how to use the computer simulation program which provides the following benefits: Allow the operator to extend the gas turbine operating period by avoiding unnecessary outages and maintenance activities. Determination of essential gas turbine maintenance activities to reduce the duration of outages. Profit optimization of co-generation and combined cycle plants. Minimization of the environmental emissions of co-generation and combined cycle plants. Training Objectives Power Plant Computer simulation: Gain a thorough understanding of computer simulation of gas turbines, co-generation, and combined cycle plants. Power Plant Components and Systems: Learn about all components and subsystems of the various types of power plants such as gas turbines, co-generation and combined cycle plants Power Plants Economics: Examine the advantages, applications, performance and economics of power plants such as: gas turbines, co-generation, and combined cycle plants Power Plant Equipment: Learn about various power plant equipment including: compressors, turbines, governing systems, combustors, deaerators, feed water heaters, etc. Power Plant Maintenance: Learn all the maintenance activities required for power plants such as: gas turbines, co-generation plants and combined cycles to minimize their operating cost and maximize their efficiency, reliability, and longevity Power Plant Environmental Emissions: Learn about the monitoring and control of environmental emissions. Power Plant Instrumentation and Control Systems: Learn about the latest instrumentation and control systems of gas turbines, co-generation and combined cycles power plants Power Plant Reliability and Testing: Increase your knowledge of power plant predictive and preventive maintenance, reliability and testing. Power Plant Selection and Applications: Gain a detailed understanding of the selection considerations and applications of power plants such as: gas turbines, co-generation and combined-cycle power plants Power Plant Profitability: Learn about the reliability, life cycle cost, profitability, refurbishment, and life extension methods for gas turbines, co-generation and combined cycle power plants. Target Audience Engineers of all disciplines Managers Technicians Maintenance personnel Other technical individuals Course Level Basic or Foundation Training Methods Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization. Each delegate will receive a copy of the following materials written by the instructor: 'POWER GENERATION HANDBOOK' second edition, published by McGraw-Hill in 2012 (800 pages) Practical manual (500 pages) Trainer Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him; Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011. Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003. Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012. Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999). Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999). Furthermore, he has received the following awards: The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016 The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996). The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East). Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983). Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada. POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information post training support and fees applicable Accreditions And Affliations

About this Training Course Identifying and correcting the root cause of failures in boilers and steam power plant equipment is essential to help reduce the chance of future problems. A comprehensive assessment is the most effective method of determining the root cause of a failure. For example, a tube failure in a boiler is usually a symptom of other problems. To fully understand the root cause of the failure, one must investigate all aspects of boiler operation leading to the failure in addition to evaluating the failure itself. When a boiler tube failure occurs, the root cause of the failure must be identified and eliminated. This 5 full-day course starts by providing an in-depth understanding of root cause analysis methodology. This includes how to identify the problem, contain and analyze the problem, define the root cause of the problem, define and implement the actions required to eliminate the root cause, and validate that the corrective actions prevented recurrence of the problem. Many practical examples on how to apply root cause analysis for various industrial problems are discussed in detail. The course then provides an in-depth explanation of all failure mechanisms that occur in steam power plants including corrosion, erosion, creep, cavitation, under-deposit attacks, stress corrosion cracking, hydrogen embrittlement, flow accelerated corrosion, etc. This course also provides a thorough explanation of all the failure mechanisms that occur in boilers and steam power plant equipment including steam turbines, condensers, feedwater heaters, etc. The symptoms of the failures, possible causes, components typically affected and solutions are also provided in this course. This includes boiler waterside, fireside and general boiler failure mechanisms as well as all the causes and prevention of all steam turbine failures, condensers, and feedwater heaters. The course also includes detailed study of many case histories of failures in boilers, steam turbines, condensers and feedwater heaters. Training Objectives Electrical Equipment Testing and Maintenance: Gain a thorough understanding of all the testing and maintenance required for all key electrical equipment including transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries Root Cause Analysis Methodology: Understand root cause analysis methodology including: identification of the problem, defining the problem, understanding the problem, identification of the root cause of the problem, providing corrective action, and monitoring the system. Applying the Root Cause Analysis Method to Industrial Problems: Learn by studying many practical examples how to apply the root cause analysis method to various industrial problems. Damage Mechanisms in Boilers and Steam Power Plant Equipment: Gain a thorough understanding of all the damage mechanisms that occur in boilers and all steam power plant equipment including turbines, condensers and feedwater heaters. These mechanisms include corrosion, erosion, flow accelerated corrosion, stress corrosion cracking, creep, under-deposit attack, cavitation, hydrogen embrittlement, etc. Symptoms of Failures in Boilers and Steam Power Plant Equipment, Possible Causes, Components Typically Affected, and Solutions: Learn about all the symptoms of failures in boilers and steam power plant equipment including steam turbines, condensers, and feedwater heaters, their possible causes, components typically affected and proven solutions. Case Histories of Failures in Boilers, Steam Turbines, Condensers, and Feedwater Heaters: Learn by studying many case histories how failures occur in boilers, steam turbines, condensers, and feedwater heaters and the corrective actions taken to deal with them     Target Audience Engineers of all disciplines Managers Technicians Maintenance personnel Other technical individuals (this seminar is suitable for individuals who do not have an electrical background) Course Level Basic or Foundation Training Methods Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization. Each delegate will receive a copy of the following materials written by the instructor: Excerpt of the relevant chapters from the 'POWER GENERATION HANDBOOK' second edition published by McGraw-Hill in 2011 (800 pages) Excerpt of the relevant chapters from the 'POWER PLANT EQUIPMENT OPERATION AND MAINTENANCE GUIDE' published by McGraw-Hill in 2012 (800 pages) ROOT CAUSE ANALYSIS FOR BOILERS AND STEAM CYCLE FAILURES MANUAL (includes practical information and case histories - 500 pages) Trainer Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him; Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011. Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003. Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012. Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999). Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999). Furthermore, he has received the following awards: The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016 The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996). The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East). Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983). Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada. POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information post training support and fees applicable Accreditions And Affliations

About this Training Course This 5 full-day course provides a comprehensive understanding of all the maintenance, inspection, diagnostics, testing, troubleshooting, refurbishment, and protective systems of all key electrical equipment including: transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries. It will cover in detail all the inspection methods and tests required to identify faults and deficiencies in electrical equipment, as well as, the repair techniques and available refurbishment methods. The course will also cover the activities required to commission this equipment and it will also cover all protective systems associated with this equipment. The objective of the seminar is to maximize the efficiency, reliability, and longevity of this type of equipment by providing an understanding of the common problems and repair techniques, preventive and predictive maintenance. Training Objectives Electrical Equipment Testing and Maintenance: Gain a thorough understanding of all the testing and maintenance required for all key electrical equipment including transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries Electrical Equipment Inspection and Diagnostics: Learn about the inspection and diagnostics required for all the components of transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries Electrical Equipment Troubleshooting: Determine all the troubleshooting activities required to minimize the downtime and operating cost of transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries Electrical Equipment Online Condition Monitoring: Learn about online condition monitoring of transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries Electrical Equipment Repair and Refurbishment: Obtain a detailed understanding of the various methods used to repair and refurbish transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries Efficiency, Reliability, and Longevity: Learn the various methods used to maximize the efficiency, reliability, and longevity of transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries Rotating Equipment Vibration Analysis and Balancing Methods: Learn about vibration analysis and balancing methods of motors and generators. Electrical Equipment Codes and Standards: Learn all the codes and standards applicable for transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries Equipment Causes and Modes of Failure: Understand the causes and modes of failure of transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries Generator Upgrades and Rewinds: Learn the various methods used to upgrade and rewind a generator Protective Systems: Obtain a detailed understanding of all protective systems required for transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries Target Audience Engineers of all disciplines Managers Technicians Maintenance personnel Other technical individuals (this course is suitable for individuals who do not have an electrical background) Course Level Basic or Foundation Training Methods Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization. Each delegate will receive a copy of the following materials written by the instructor: The relevant material of the 'ELECTRICAL EQUIPMENT HANDBOOK' published by McGraw-Hill in 2003 (600 pages) Electrical Equipment Maintenance, inspection, diagnostics, testing, troubleshooting, refurbishment, and protective systems Manual (500 pages) Trainer Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him; Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011. Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003. Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012. Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999). Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999). Furthermore, he has received the following awards: The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016 The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996). The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East). Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983). Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada. POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information post training support and fees applicable Accreditions And Affliations

About this training course This 5 full-day course will provide a comprehensive understanding of the design of circulating fluidized bed (CFB) boilers. The design of all CFB boiler components and equipment including furnace, cyclones, economizers, superheaters, reheaters, loop seals, expansion joints, refractory, and L-valves will be covered in detail. All potential operating problems and major operating problems, corrective actions and maintenance required for CFB boilers will be covered thoroughly. This course will focus on designing CFB boilers that have the highest efficiency, and maximum longevity and capacity factor. All the common problems encountered in CFB Boilers will be discussed in detail.This includes thermally induced failures, anchor system induced failures, water walls tube failures, NMEJ damages, clinker formation, refractory damages, APH tube chock-up, erosion and corrosion. The solutions to each of these problems will be presented. All repair and refurbishment methods, preventive and predictive maintenance required for CFB boilers will be covered in-depth. Several studies have confirmed that CFB boilers are the best method for power generation.This is due to their fuel flexibility, and lowest electricity cost among all types of boilers. This technology is in great demand due to various other advantages such as lower emissions as compared to other types of boilers and has a carbon footprint well below the norms laid down by the World Bank emission requirements. This course is a MUST for anyone who is involved in the design, operation or maintenance of circulating fluidized bed boilers, because it covers how these boilers are designed and provides guidelines and rules that ensure the CFB boilers have great performance. This course will also provide up-dated information in respect to the design of supercritical once-through CFB boilers and ultra supercritical CFB boilers. Training Objectives Circulating Fluidized Bed Boiler Design: Gain a thorough understanding of the best design methods of circulating fluidized bed boilers. Design of Circulating Fluidized Bed Boiler: Components and Systems: Learn all the techniques used to design CFB boiler equipment and systems including furnace, cyclones, economizers, superheaters, reheaters, loop seals, expansion joints, refractory, and L-valves. Design of Circulating Fluidized Bed Boiler to Achieve Highest Efficiency, and Best Performance and Economics: Gain a thorough understanding of all the methods used to design CFB boilers having the highest efficiency, longevity and capacity factor as well as best economics. Circulating Fluidized Bed Boiler Equipment: Learn about various equipment of circulating fluidized bed boilers including: furnaces, cyclones, economizers, superheaters, reheaters, ammonia injection systems, electrostatic precipitators, polishing dry scrubbers, fuel and sorbent feeding systems, bottom ash handling and extraction systems and materials. Circulating Fluidized Bed Boiler Environmental Emissions: Learn about the monitoring and control of environmental emissions from circulating fluidized boilers. Circulating Fluidized Bed Boiler Instrumentation and Control Systems: Learn about the latest instrumentation and control systems of circulating fluidized bed boilers. Circulating Fluidized Bed Boiler Reliability and Testing: Increase your knowledge of predictive and preventive maintenance, reliability and testing of circulating fluidized bed boilers. Circulating Fluidized Bed Boiler Selection and Applications: Gain a detailed understanding of the selection considerations and applications of circulating fluidized bed boilers. Circulating Fluidized Bed Boiler Maintenance: Learn all the maintenance activities required for circulating fluidized bed boilers, to minimize their operating cost and maximize their efficiency, reliability, and longevity. Circulating Fluidized Bed Boiler Refurbishment, and Life Extension Methods: Learn about life cycle cost, profitability, refurbishment, and life extension methods for all types of circulating fluidized bed boilers. Circulating Fluidized Bed Boiler Commissioning: Understand all the commissioning requirements of circulating fluidized bed boilers. Circulating Fluidized Bed Boiler Codes and Standards: Learn all the codes and standards applicable for circulating fluidized bed boilers. Target Audience Engineers of all disciplines Managers Technicians Maintenance personnel Other technical individuals Training Methods Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization. Each delegate will receive a copy of the following materials written by the instructor: 'POWER GENERATION HANDBOOK' published by McGraw-Hill in 2012 (800 pages) Design of Circulating Fluidized Bed Boiler manual (600 pages) Trainer Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him; Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011. Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003. Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012. Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999). Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999). Furthermore, he has received the following awards: The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016 The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996). The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East). Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983). Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada. POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information post training support and fees applicable Accreditions And Affliations

About this Training Course This is an advanced chemistry training course for power plant chemists and boiler engineers wishing to expand their knowledge and skills, and to become more effective in their day-to-day roles dealing with thermal power plant chemistry. This 5 full-day course will provide ample opportunity for robust technical discussion and expand on advanced concepts in thermal power plant cycle chemistry. It focuses only on the steam/water aspects of the thermal power cycle. This course is a MUST for all power plant chemists and boiler engineers. It is also beneficial for anyone involved in power plant operation and maintenance because it provides guidelines and rules for improving power plant performance and reliability. Training Objectives Gain a significant increase in understanding of cycle chemistry in steam power plants and the inter-relationships between plant operation, cycle chemistry and potential failure modes due to corrosion and/or deposition throughout the cycle Gain a thorough understanding of all causes of corrosion in a steam power plant and all the methods used to reduce the corrosion rate in a steam power plant Become better equipped to effectively manage the corrosion and deposition risks in a thermal power plant Learn how to reduce failure rate in boilers and steam power plants and improve plant performance Understand condensate polishing and treatment of condensate return to industrial boilers Discover the causes of boiler water contamination and treatment programs Learn about layup and offline corrosion protection Understand water chemistry limits to prevent steam contamination by carryover Learn about boiler water chemistry guidelines and control of steam chemistry Understand high-purity make-up treatment methods Perform demineralizer calculations Perform system design calculations Gain a thorough understanding of mixed bed polishing and reverse osmosis Target Audience Power Plant Chemists Boiler Engineers Engineers involved in the operation and maintenance of power plants Managers Technicians Maintenance personnel Other technical individuals (this seminar is suitable for individuals who do not have a background in chemical engineering) Course Level Advanced Training Methods Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization. Each delegate will receive a copy of the following materials written by the instructor: 'POWER GENERATION HANDBOOK' second edition, published by McGraw-Hill in 2012 in New York (800 pages) Water Chemistry for Thermal Power Plant Chemists and Boiler Engineers Manual (650 pages) Trainer Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him; Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011. Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003. Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012. Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999). Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999). Furthermore, he has received the following awards: The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016 The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996). The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East). Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983). Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada. POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information post training support and fees applicable Accreditions And Affliations

About this training course This 5 full-day course provides a comprehensive understanding of the inspection, diagnostic testing, troubleshooting, maintenance, overhaul and refurbishment of all steam and gas turbines. This course will focus on maximizing the efficiency, reliability, and longevity of this equipment by providing an understanding of the common problems and repair techniques, preventive and predictive maintenance of all steam and gas turbines. This course is a MUST for anyone who is involved in diagnostic testing, troubleshooting, or maintenance of steam and gas turbines because it covers the various maintenance strategies, troubleshooting techniques, and the latest testing and refurbishment methods of all steam and gas turbines. The course provides also guidelines and rules that ensure successful refurbishment of all types of steam and gas turbines. In addition, this course will cover in detail advanced fault detection techniques, critical components and all preventive and predictive maintenance methods of steam and gas turbines in order to increase their reliability and reduce their operation and maintenance cost. This course will provide the following information for all types of steam and gas turbines: Diagnostic Testing Techniques Troubleshooting Methods Latest Maintenance Strategies Modern Refurbishment Methods Enclosures and Sealing Arrangements Codes and Standards Common Operational Problems All Predictive and Preventive Maintenance Methods Performance Surveillance Methods Training Objectives Equipment Maintenance: Gain a thorough understanding of the latest maintenance strategies of steam and gas turbines Equipment Diagnostics and Inspection: Learn in detail all the diagnostic techniques and inspections required for critical components of steam and gas turbines Equipment Testing: Understand thoroughly all the tests required for the various types of steam and gas turbines Equipment Troubleshooting: Determine all the troubleshooting activities required to minimize the downtime and operating cost of steam and gas turbines Equipment Repair and Refurbishment: Gain a detailed understanding of the various methods used to repair and refurbish steam and gas turbines Efficiency, Reliability, and Longevity: Learn the various methods used to maximize the efficiency, reliability, and longevity of steam and gas turbines Equipment Performance Surveillance: Gain a detailed understanding of the various methods used to perform performance surveillance on steam and gas turbines Design Features: Understand all the design features that improve the efficiency and reliability of steam and gas turbines Equipment Enclosures and Sealing Methods: Learn about the various types of enclosures and sealing arrangements used for steam and gas turbines Equipment Commissioning: Understand all the commissioning requirements for steam and gas turbines Equipment Codes and Standards: Learn all the codes and standards applicable for steam and gas turbines Equipment Causes and Modes of Failure: Understand the causes and modes of failure of steam and gas turbines Target Audience Engineers of all disciplines Managers Technicians Maintenance personnel Other technical individuals Training Methods Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization. Each delegate will receive a copy of the following materials written by the instructor: Excerpt in digital format of the relevant chapters from the 'POWER PLANT EQUIPMENT OPERATION AND MAINTENANCE GUIDE' published by McGraw-Hill in 2012 (800 pages) Excerpt in digital format of the relevant chapters from the 'POWER GENERATION HANDBOOK' second edition, published by McGraw-Hill in 2011 (800 pages) Steam and Gas Turbines Maintenance Manual (300 pages) Trainer Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him; Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011. Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003. Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012. Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999). Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999). Furthermore, he has received the following awards: The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016 The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996). The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East). Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983). Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada. POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information post training support and fees applicable Accreditions And Affliations

CPD Accredited, Interactive Short Course 2 or 3.5 hour hr sessions What are the autistic spectrum disorder, autism and asperger's syndrome? How can you best understand, and thus help, those affected? Course Contents of the shorter course: What is ASD Autism and Asperger's Syndrome Understanding those on the Spectrum How to approach and help those on the Autistic Spectrum Great for teachers and TAs in schools, and for those working in care with older people with ASD Benefits of this Short Course: About 1% of the population is thought to be on the Autistic Spectrum That is several children per nursery and primary school and a significant amount of young people in secondary schools Many with Asperger's Syndrome will also go to university The way they experience the world is very different to 'neuro-typical' people Understanding their condition helps to support them and give them the best chance

The prevalence of ill health is real. Become an expert practitioner in treating individuals using a truly holistic approach. A MESSAGE FROM THE AUTHOR The great need for practitioners is emphasised today, not only by the prevalence of well-established diseases, but also by the appearance of quite new conditions which are not necessarily regarded as being nutritional illnesses. In fact many students come to Nutritional Therapy after experiencing and their own health problems and seek to help others with similar difficulties. We know that nutrition lies at the very heart of these problems and it is our absolute intention to share that knowledge with you. Every person's nutritional needs differ and our courses teach students to recognise this at the outset - there is no haphazard approach. We are absolutely certain that you will find this a fascinating course as you train to become a practitioner of the highest degree. DR. LAWRENCE PLASKETT Course Duration 3 years Study Hours 3,000 hours Course Content 14 folders Course Fee £1,995 Course Overview The Plaskett Professional Diploma in Nutritional Therapy is the most scientific and advanced practitioner level course that we offer. Nutritional Therapy is a form of therapy that uses food, supplementary nutrients and cleansing procedures to alleviate or prevent chronic health problems and this course will train you to practise as a Nutritional Therapist of the highest degree. You will: Receive a training which is truly holistic in nature Be presented with the unique teachings of Dr. Lawrence Plaskett whose long experience working in the borderlands between nutrition and medicine enables him to offer a synthesis between many fields that are not often brought together: nutrition, pathology, biochemistry, toxicology, pharmacology, cell biology, naturopathy and homoeopathy Develop the professional skills and specific diagnostic insight to be able to apply nutrition to health effectively, a training for successful practice that should be applicable anywhere in the world Be trained to offer help with a wide range of conditions, the majority of which are not necessarily regarded in conventional medicine as being nutritional illnesses. These encompass an extremely wide range of chronic conditions, including most diseases and a vast array of symptoms - physical, emotional, mental - which can frequently be experienced outside the range of conventional medical diagnostic 'labels'. Develop the necessary expertise in nutrition which is often lacking in other fields of complementary or alternative medicine. Any programme of nutritional supplements and diet needs to be matched exactly to individual needs by a well-trained practitioner BREAKDOWN OF THE COURSE SECTIONS The Nutritional Therapy Diploma includes the following 14 folders: FOLDER 1 THE HOLISTIC MODEL OF HEALTH CARE This Folder starts with a suggested programme of study and some simple hints on how to make best use of your study time. It then teaches an understanding of basic principles that underpin your entire grasp of nutrition as a biological process. The naturopathic emphasis is upon freeing the body tissues of toxins and the damaged cell components that drag them down to the chronic level.  The Folder looks closely at the nature of toxins and their sources. It looks at their behaviour and effects when they enter the body, the character and mechanisms of the damage they do and, above all, the mechanisms by which they can be removed and the damage repaired.  These are no flights of fancy, as orthodoxy would often have us believe. Rather they are strongly supported by medical science, as the course material will demonstrate. In order to develop a grasp of these processes they have to be visualized as they really happen, on the cellular level.  A Side Book is included covering the structure and life of the cell. Areas Covered Study skills Looking after the body The Life Force Stopping the rot and starting to recover Movements of toxins within and around the body Our relationship to medical orthodoxy The nature of natural and unnatural chemical toxins The concept of toxin-free food Organic growing and water purification Free radicals and anti-oxidants Routes of toxin entry and elimination Damage caused by toxins lying in the tissues Detoxification The relationship between toxic burden and toxic damage The energy reserve role of fat The lipoproteins of the blood FOLDER 2 MINERALS AT WORK IN NUTRITION - PART 1 The minerals come forward as the strongest contenders for pride of place among the nutrient classes because they are so critically vulnerable to deficiency and imbalance in today’s western world.  “Get the minerals right before anything else” is a penetrating summary of their necessary priority. You will learn how the bulk minerals (those we need in greatest amount) depend upon each other and how the micro minerals cannot fulfil their function correctly without a correct balance of the bulk ones.  This Folder takes “first things first” by laying the soundest possible foundation for the study and management of the bulk metals – sodium, potassium, calcium, with magnesium to follow in Folder 5.  We believe that few course providers deal as thoroughly with this absolute cornerstone of nutrition as we do. The effects of these mineral balances permeate the entire subject of nutrition. You will look at many aspects of the subject that affect health. Areas Covered Composition of the human body Overview of macro minerals Sources of nutritional minerals Biological concentration of minerals Micro minerals as catalysts Toxic minerals Digestion, absorption and storage Mineral/mineral antagonisms Sodium and potassium balance Symptoms of sodium and potassium excess or deficiency The sodium pump Sodium and potassium in foods Potassium administration in therapy Calcium in the human skeleton and teeth Calcium in body fluids Hormonal control of calcium Osteoporosis and disputes over calcium requirements Calcium in foods Calcium “mishandling” Calcium in supplement Side Book: The Chemistry of Nutrition Whilst it is possible to teach nutrition to some degree without studying the chemical nature of the nutrients, it is much better that you have at least a superficial understanding. Folder Two therefore includes a side book on Chemistry for those who are new to the subject. However, no one expects you to become highly informed on chemical structures. Access to the facts and to an explanation is what is important. This side-book will free you, as a future practitioner, from the need to manipulate the nutrients without understanding them as many others try to do. Elements, compounds and molecules Valency Ions, acids and salts Combining proportions and moles Carbon compounds and functional groups Oxidation and reduction Calculating the vitamin or mineral content of supplements FOLDER 3 THE BULK NUTRIENTS – PROTEIN, CARBOHYDRATE, LIPIDS AND ENERGY These nutrients provide both the fuel and the building materials for the body. Orthodox nutrition teaches these topics very thoroughly. As to the structures of the compounds, we teach the same things they do.  However, all three main classes of bulk nutrients have their distinctive “wrinkles” when examined from an alternative viewpoint.  With the proteins this has to do with avoiding excesses and, to some degree eschewing animal sources for naturopathic and other reasons.  With the carbohydrates it involves recognizing at a sensitive level the long-term harm that can be done by free sugars and the crucial importance of blood sugar maintenance and control. Orthodox treatments may claim to do these things but there is a vast difference of emphasis and effect.  Among the lipids the “wrinkles” have to do with intricate management of the balance among the essential fatty acids and the importance of the phospholipids in the diet.  You will also learn about the propensity of fats to form toxins and the need to moderate fat intake. All of these so-called alternative “wrinkles” have weighty scientific support, which you will have explained for you.  The chemical nature of these bulk nutrients is fully presented for those who wish it, with a “faster track” through for those who do not. Areas covered Different kinds of proteins The amino acids in proteins The structure of proteins Proteins in foods The essential amino acids and protein quality Nitrogen balance and protein metabolism Proteins in therapeutic policy The simple sugars and sugar derivatives Di, tri and polysaccharides Transformations of carbohydrate Sugars and starch in diets Blood sugar control Metabolic energy The make-up of fats Different kinds of fatty acids Essentiality of omega 6 and omega 3 Lipids and coronary thrombosis Cholesterol, Inc. blood cholesterol levels Fats in western diets Toxins from fats by chemical damage Lecithin and other phospholipids Quantifying energy – units of measurement Energy content of foods and fuels Human expenditures of energy Basal metabolic rate FOLDER 4 FOODS AND FOOD CLASSES Properties, Composition and Naturopathic Effects The merits and disadvantages of wheat, milk and meat are carefully analysed and exposed from the standpoint of both scientific and also naturopathic considerations.  There will be much here to ponder, whilst the scientific evidence leaves little to doubt. You will look rather exhaustively at the merits, nature and composition of vegetables and fruits, not only as groups but also as sub-groups and down to the individual plants.  You will find yourself in a position, when it comes to prescribing, to be directive when necessary about which individual fruits and vegetables it will be best to use.  The groups of pulses, nuts, seeds, fish, shellfish and other seafood’s, as well as beverages, will be closely examined for their composition and suitability for prescription in treatment diets.  Acidity and alkalinity in foods is carefully examined. This Folder is “all about food” but it is also food for thought from beginning to end. Areas covered The wheat grain and its milled fractions Types of bread Nutritional problems of wheat and wheat allergy Sprouted wheat and wheat grass Barley, oats and rye The composition of milks Milk as infant feed The variety of dairy products Nutritional and health problems associated with milk Milk allergy and intolerance Hidden milk in foods Vegetable mineral content and vitality Eliminatory effect of vegetables Composition of 49 different vegetables Potential hazards of plant foods Composition and nature of pulses, nuts and seeds The composition of different meats Naturopathic negatives associated with meat The composition of different fish types Fish as an omega 3 source Shell fish and crustacea Nutritional problems of tea and coffee The composition of fruits Strongly eliminative properties in fruits Acid and alkali-forming foods Using the food composition tables FOLDER 5 MINERALS AT WORK IN NUTRITION - PART 2 Each and every member of the micro minerals group will prove a fascinating area of study and will face you at times almost with disbelief that such minute amounts of substance can exert such extraordinarily powerful effects upon the way the body works and therefore upon health.  Each micro mineral displays its own particular pattern of effects arising from either deficiency or excess. This is almost like a personal signature of the mineral. These will be learnt now but employed later in diagnosis to help determine the likely patterns of micro mineral imbalances in your patients. The role of all-important magnesium is examined together with the principles of using magnesium in therapy. This element plays a key macro mineral role and exerts decisive control over naturopathic elimination.  Areas covered Iron, zinc, copper, manganese, selenium, chromium, molybdenum, iodine, silicon, fluorine, vanadium For each of the microminerals where appropriate: Body content; physiology functions; effects of deficiency or excess; toxicity; factors promoting retention or loss; occurrence in foods; different chemical forms; associated diseases; the use of the appropriate supplements Roles of magnesium in the body Magnesium in foods Effects, diseases and symptoms of magnesium deficiency Naturopathic expectations from magnesium therapy FOLDER 6 THE VITAMINS AT WORK IN NUTRITION The vitamins are mostly micro catalysts just as the micro minerals are. Sixteen of them are the subjects of this Folder.  We first explain their known effects in the body and then go on to set out the ways that they may be used, either for direct therapeutic effect, or in support of other components of nutritional therapy.  As in the cases of all the other nutrients, there will be both scientific and naturopathic evidence presented. Good reference material will be provided. Areas covered For each of the vitamins and vitamin-like substances where appropriate: Body content; precursors; physiology functions; effects of deficiency or excess; toxicity; factors promoting retention or loss; occurrence in foods; different chemical forms; associated diseases; the use of the appropriate supplements. Vitamin A; beta-carotene; Vitamins B: thiamine, riboflavin, niacin, pyridoxine, B12, folic acid, choline, inositol; Vitamin C, Vitamins D1 and D2; tocopherols (Vitamin E); Vitamin K. FOLDER 7 BOWEL FLORA AND THE MAINTENANCE OF HEALTH It is possible to manage and manipulate the bowel flora – the bacteria that inhabit the intestines – so as to produce optimal benefits to health.  Antibiotics and certain dietary errors appear to work in the opposite direction and encourage a flora that will generate more toxins. This Folder deals with both scientific and naturopathic facts and technique and explains how to harness the potential that resides here for bringing better health or maintaining health. It is a crucially important area of nutritional management. Every case you will treat will need the possible prescription of bowel flora products to be reviewed. The other part of this Folder is about the maintenance of health. We provide a general round-up of this pre-clinical part of the course with an overview of nutritional requirements and wise practice in the design of those diets that may be intended to be “healthy” but not necessarily therapeutic.  It includes examination of the special needs of vulnerable groups. You can expect, of course, to meet patients of all ages and conditions and, often enough, you will be asked merely to provide guidance upon what type of diet will best maintain their health.  It also reviews the production of toxin-free food and the hazards posed by the industrialization of food. Finally, there is an approach to the use of supplements for health maintenance and a discussion of strategies for on-going cleansing and toxin avoidance so as to assist in maintaining good health. Areas covered The naturopathic view of the benefits of bowel flora Effect of diet on the bowel flora The putrefactive bacteria Balancing lactose fermenters with other types Toxic amines Benefits of the acid producing species Negatives associated with antibiotics Breast feeding and the bowel bacteria Bowel flora products Overview of the British diet Nutrient requirements for the population Higher requirements for the health conscious Special needs of children and the elderly Special needs of vegetarians and vegans The requirements of pregnancy and lactation Organic growing Industrial food processing and food additives Maintenance supplements Maintenance cleansing FOLDER 8 DIAGNOSIS This Folder is divided into two parts. The first gives a detailed understanding of the basis of diagnosis, while the second gives direct instruction in performing diagnoses.  These two parts, taken together, comprise a major step in your induction as a naturopathic nutritionist. The induction into technique and approach is an essential step, but even more than that, the moulding of your thought process is so very important.  You have to move into the particular “observer” position, mentally, from which the diagnosis is best carried out. The first part of the Folder both provides the “nuts and bolts” of nutritional diagnosis but it also provides the mental positioning to enable you to carry it out with confidence and expertise.  The diagnosis requires understanding of the “constitution”, defined both naturopathically and genetically. An optional side book covers both the miasms and the Chinese 5 elements in respect of their bearing upon diagnosis within nutritional therapy. Fundamental to the practical aspect is the technique for taking case histories and then interpreting them along combined naturopathic and scientific lines.  This logically leads onto the next stage – treatment – in a rational sequence. This Folder contains five “demonstration” case histories. FOLDER 9 TREATMENT This is in many ways the crux of the whole course.  However, being released into nutritional treatments – with their full power – without having made the most thorough preparation, would be most unwise.  Absolutely every topic that has been covered before is required in one way or another at this point. It is here that the interpretation of the case history becomes translated into a prescription of diet and supplements that is honed in a sensitive way to the patient as an individual.  We outline a number of “levels” of the diagnosis that feed into the treatment decisions. There is a “whole person” level, a “weak organ” level, a “metabolic imbalances” level, a “nutritional deficiencies” level and, finally, the lowest in the hierarchy, a “named diseases” level. We also introduce here the profound concepts of intensity, direction and level as they apply to the very basis of Nutritional Therapy prescriptions. All these contributions must converge to provide the best overall treatment.  The focus at this point is on defining the dietary guidelines and the careful orchestration of the essential minerals and vitamins that are to be used.  However, this is also the point at which various named treatments are considered, including bowel cleansing procedures, bowel flora treatment and some of the contributions towards Candida treatment.  These options are set out here and then developed more in the later Folders of Part Two. Special approaches such as the liver cleanse are also considered here along with amino acid therapy, antioxidant therapy and the anti-inflammatory prescription.  We also provide guidelines on how detailed analysis of the composition of diets, and the design of special diets based on such analysis, can contribute to treatment. This Folder provides the “core” of all this, with various modulations and variations being available from the subsequent Folders for “fine tuning”. FOLDER 10 STUDY OF CASE HISTORIES There is nothing quite like practice where case histories are concerned. To be able to study them with great facility and insight and then discern the routes by which they lead towards exact treatment – that is to be your aim here. The Folder provides the challenge of “interpreting” a number of case histories, with help and with feedback. This is an approach that can lead you towards confidence and competence in this task, which is at the centre of practitioners’ daily work. Approaches and solutions are presented. This Folder gives 11 abridged case histories and 20 fully detailed case histories for analysis by the student, 31 case histories in all. These are selected to provide a variety of different types of treatment situation including some that are special or unusual. FOLDER 11 ADDED OR SPECIAL NUTRIENTS AND HERBS In covering the prescribing of supplement programmes in Folder 9, you will have been focused primarily upon those that rank in orthodox nutrition as “essential nutrients”, particularly minerals and vitamins.  However, Nutritional Therapy is enormously enriched by a wide range of other biochemicals that cannot be classified as “essential”. Life does not stop without them, yet they can be extremely helpful, especially to individuals with compromised health.  These are more often metabolic intermediates than recognised nutrients, but they can be extraordinarily valuable for organ-directed therapy. Many of these involve up-to-the minute discoveries.  We teach about phytonutrients in foods (eg carotenoids, flavonoids, proanthocyanidins, isothiocyanates, organic sulphides and curcuminoids) and about the possibilities, when necessary, to provide them in supplement form. Herbs are covered too in their special role of support-therapy to Nutritional Therapy, usually in an organ-directed or system-directed role. Echinacea, silymarin, aloe, ginkgo, bromelain and St John’s Wort are just examples of these herbs.  We also teach the use of herbal combinations for specific purposes. This wide choice of “extra” items is the subject of specific instruction in this Folder. FOLDER 12 TREATING NAMED MEDICAL CONDITIONS - PART 1 Folder 9 makes it plain that, because this is a holistic discipline, the named medical condition is generally low on the hierarchy of treatment criteria.  Although that is generally the case, the extent to which it holds good may depend upon how advanced is the particular disease condition. At all events, the practitioner does need a degree of disease-related training, which is provided in this Folder and the next.  Some 180 different medical conditions or classes of conditions, mostly chronic, are addressed. Special space is provided to cover fully selected topics that are of key importance in an alternative medicine practice, such as obesity, alcoholism, allergies and the menopause.  We also provide you with specific treatment guidance with the proviso that whole-person treatments and organ-system related treatments either take priority or are provided alongside.  Where appropriate some insights are given into the prior allopathic treatments and environmental and social conditions that may cause or exacerbate the listed conditions.  This provides for the patient’s circumstances and lifestyle to be adjusted in rather specifically apt directions. The main categories in this Folder are: circulatory, rheumatic and digestive diseases, along with obesity, alcoholism and immunity states including autoimmunity and allergies.  All the disease conditions addressed are closely studied from the standpoint of orthodox pathology as well as their Nutritional Therapy treatment.  Hence Folders 12 and 13 in their own right amount to a course in the medical science of pathology and this represents a substantial expansion over earlier versions of the course.  These Folders will constitute invaluable reference material for use when you have set up in practice. FOLDER 13 TREATING NAMED MEDICAL CONDITIONS - PART 2 This Folder continues the work started in Folder 12.  Here included are diseases of the nervous system and brain, skin, reproductive system, urinary system, endocrine system, liver/gallbladder, respiratory system, eye, ear, mouth, nose and bone. Also included are psychological and systemic diseases (including ME), infectious diseases and some directly nutritional diseases. The detailed attention to pathology is maintained throughout. During the course of Folders 10-14 inclusive, students undertake no less than 12 cases on their own, covering full data-collection, analysis and interpretation, with prescription of diet and supplements.  Together with the 36 case histories studied in earlier Folders this gives 48 case histories studied FOLDER 14 MONITORING TREATMENT, THE THERAPEUTIC RELATIONSHIP AND PRACTICE MANAGEMENT Having got the treatment going, there is a need for specific instruction in the on-going task of monitoring the patient’s condition and reacting accordingly with adjustments to the therapy.  Patient and practitioner alike have to be aware that the first prescription is likely to be just the start of a process. Reading the signs of change looms large in this instruction and familiarization. Responding to them is the second part. Here there is a need to understand the terms “intensity” and “direction” in therapy. “Intensity” refers to the degree of healing and naturopathic pressure being applied and “direction” refers to the aims of the particular choice of treatment being applied.  You will learn to distinguish between situations that call only for a change of “level” and those that call upon you to rethink and change “direction” when the patient’s progress levels off as this may then initiate a new burst of healing changes.  Another way to break out from the “plateau” situation is to assess the exact nutrient composition of the whole diet – an action that is too detailed and time-consuming to do with every patient and usually not needed.  A part of the Folder is about drugs, when and when not to encourage their use, and how to manage the drug-dependent patient. You need to acquire at least a passing familiarity with the main classes of prescription drugs, which are explained in this Folder. This Folder also provides information on Laboratory testing procedures that may be recommended to patients. Finally we offer subjects of crucial importance to working practitioners, namely a study of “The Therapeutic Relationship” and “Practice Management – Running The Practice as a Business”. TESTIMONIALS Here's what students have to say about the course Grace Kingswell, Nutritional Therapist UK "I was recommended Plaskett by my own functional medicine practitioner. I knew that if she was recommending it, it would be worthwhile. I wanted a full body overview and not a “match the supplement to the symptom” approach, and that is certainly what the Plaskett Dip;oma in Nutritional Medicine course delivered. I wanted to be qualified to run my own business as a practitioner afterwards, and it is the most complete and highest level course that the Plaskett College offer. My knowledge of naturopathy and nutritional medicine was pretty solid before I started due to personal experience, but I’ve really built on this now and feel confident that I know how to help others. I’ve also learnt a lot more of the biochemistry behind the science too. The study experience was really good, but it’s a lot of self-motivation, and if you don’t have that then it might be touch to finish it, as it’s completely self-driven". Ben C Alberts, Director South African Institute of Behavioural Nutrition South Africa The Plaskett Nutritional Therapy Diploma was one of the most rewarding programmes of my life. Apart from the media hype around healthy living it is only after the completion of a proper programme that one truly start to understand the intricacy of the human body and what healthy living really is. Within the Plaskett programme the combination of nutrition, pure science and a naturopathic view provided me with a completely new perspective on health management. Against a fairly orthodox background it took me some time within the programme to understand the true principles, and once realized fundamentally changed the way I view personal health management. Throughout the programme the support from my tutor was phenomenal with concise and very valued feedback, and certainly at exceptional detail. The course content was of a high standard and must not be underestimated in both volume and complexity. For me personally, the programme delivered immense value and I will recommend it to any of my peers and clients. Diane Brough, Nutritional Therapist Canada When I first started thinking about taking a course in nutrition, I was living in Botswana, in Africa. I was looking for a college that would offer me the support and guidance that is so important for long distance learning. I’m probably one of the college’s longest registered students because my family moved to five different countries during my studies! I am very thankful for the college’s patience and continued support. Plaskett College impressed me with their personal approach to the course and the fact that all modules were composed by Dr. Lawrence Plaskett, a medical research biochemist and the college’s Founder and Principal. I studied the Diploma in Nutritional Medicine because my plan was to have my own practice. I practised at a herbal clinic as a Nutritional Therapist and Iridologist after I completed my diploma, but then decided to study massage therapy, so put my practice aside while at school. I recently established Revitalife Therapeutics and offer massage therapy, manual lymphatic drainage, nutritional therapy and iridology. Vittoria Viglietti, Nutritional Therapist & Founder of Nutriwild Namibia I chose Plaskett College because I really wanted to make a difference where natural medicine was concerned. After losing my father to Cancer, and experiencing malpractice with all the orthodox medicine we followed, this pushed me even more to pursue an in-depth education in nutritional medicine. I chose Plaskett College’s, Nutritional Medicine Course, because I found this to be very informative for anyone interested in perusing a future in the field of Natural medicine and Nutritional Therapy. My studies have been such a memorable journey for me. I started studying just over 2 months, after losing my father. A very difficult time in my life. The course I chose to do with Plaskett would take me 4 years to complete. I am in my 5th year (nearly my 6th year), doing this particular course and I have only experienced encouragement, understanding of my situation and support from the college to continue to complete the course in my time. I could not show more gratitude towards them for this. I did not expect that after losing my father my life would hit lots unforeseen hurdles, causing my study time to suffer greatly. Yet, through all this, Plaskett College only showed me more support and encouragement to persist with my studies.

CLINICAL PRP  • Sports medicine • Traumatology • Ophthalmic • Burn trauma • Wound healing – diabetic foot • Skin grafting • Dentistry-sinus lift • Tooth implants. Group Discount | We do not charge VAT! PRP theory & equipment: Training Online Theory will enable you to understand: Anatomy Vascular Supply, Contraindications Patient consultation Complications Management Post treatment advice Dealing with equipment | Suppliers A certification of training will be provided upon completion of the course. Aesthetic PRP • Skin rejuvenation • Hair restoration • Fat grafting in combination PRP • Post laser •Acne & Rosacea •Acne scar •Tissue Volumisation alternative of HA fillers •Aesthetic gynaecology /urology.   Platelet Rich Plasma We will cover pertinent information including mechanism of action, safety and efficacy issues, management and treatment of complications, dilution guidelines, and more. Hands on practical session – skin rejuvenation and hair loss Extraction, Preparation and Dosage Management Injection techniques – face, neck and head (hair loss); also the use of cannula Upon successful completion of the course, you will receive a certificate and title of PRP Certified Practitioner. MASTER CLASS PRP & PRF During the course we are providing . Taking blood and how to use a Centrifuge . PRP injecting techniques in face neck and décolletage hands. PRP Microneedling using a DERMAPEN. Combination treatment PRP with Mesotherapy. MECHANISM OF ACTION Platelets + Leucocytes form 3D mesh release of GF Chemo attraction and migration of macrophages and stem cells Stem cells proliferates by mitosis Stem cells undergo differentiation process BENEFIT FROM PRP TREATMENT & THERAPYExperience the advantages of PRP treatment and therapy, utilizing autologous blood with natural growth factors for disease-free and hypoallergenic benefits. Boost wound healing by regulating mitosis, proliferation, and differentiation, enhancing tissue with collagen, elastin, and hyaluronic acid. Benefit from improved tissue oxygenation, nutrition flow, and support for procedures like hair transplants, fat transfers, and skin grafts.PRP works effectively in skin rejuvenation, facial resurfacing, microneedling, and combines well with HA, PDO threads, skin boosters, peeling, or CO2 lasers. It also proves beneficial for hair restoration, showing positive results in various protocols for Androgenic alopecia and age-related hair loss.PRP where works .Skin rejuvenation-facial resurfacing application-injection alone. Microneedling Combination with HA, Combination with PDO threads, Skin boosters , peeling or CO2 lasers Hair restoration, Multiple protocols with positive results Evidence for improvement of: Androgenic alopecia-male and females, “spot hair lost” Improvement of age related hair loss. You need to be medically qualified as a doctor, dentist, nurse, pharmacist or paramedic with full governing body registration and have completed a Foundation Filler Course and to have administered a number of cases. MASTERCLASS 8 CPD POINTS 1 DAY INTENSIVE COURSE  ONLINE VIDEO TRAINING

MASTERCLASS ONE-2-ONE 8 CPD POINTS 1 DAY INTENSIVE COURSE  ONLINE or IN-CLINIC NOTE! After booking we will contact you for scheduling the exact course date! Courses dates are subject to change due to mentors availability. We will inform you via email if a date becomes available! PDO Threads course Our one-day Harley Elite Academy PDO cog thread lift ( Elite Mini Face Lift )training course is providing for Doctors ,Nurses , Dentist looking to further to present non-surgical facelift. It s the newest trend made popular by some of celebrities recently and it is an amazing and effective latest technique to mehanical lift and tighten skin. We provide second option using mono and screw it has the potential to redefine facial contours and induces collagen production. This type threads support structure for the tissue of the face by encouraging natural collagen synthesis with 30 % immediately results that peak at 6 months and more. During the training learn how to safely achieve mid and lower face lift and tight , we aim to help you master class techniquesre-volumisation and lifting using one of the highest quality products on the market PCL Threads.   Thread Lift Masterclass Course You will perform this procedure on live models under the supervision You will practice using This master training will teach you how to introduce threads in Body areas including: Inner Thigh | Inner Arm | Knee | Tummy | Buttock Using threads: screw, mono and cogs. During Dermal Filler Masterclass, you will learn the full Anatomy of the face and gain practice.Anatomy, Vascular Supply of the face, Nerves Contraindications Complications Management Post treatment advice Additional information ATTENDANCE ONLINE (theory), IN-CLINIC (Practice) PDO THREADS LIFT AREA BEGINNER Face and Neck Threads Lift, ADVANCED Body Threads Lift, MASTERCLASS Face, Neck, Body Threads Lift, MASTERCLASS Foxy Eyes | Cat Eyes