79 Lifting Equipment Inspection courses

This expertly designed bundle offers essential knowledge on lifting equipment, manual handling, and workplace equipment safety. The LOLER Training course delivers a clear understanding of the legal requirements surrounding lifting operations, ensuring participants grasp the responsibilities involved in maintaining safe practices. Alongside this, the Manual Handling Training course addresses the principles and precautions necessary to reduce injury risk when moving loads, while the PUWER course covers the safe use and maintenance of work equipment under the Provision and Use of Work Equipment Regulations. Ideal for professionals responsible for equipment safety and workplace wellbeing, this bundle provides vital information that supports safer working environments. Delivered fully online, these courses are suitable for anyone looking to deepen their knowledge in these key areas without the need for physical attendance. With CPD accreditation included, this package offers credible training that can enhance professional development while meeting industry standards. These comprehensive courses are available in this LOLER Training - CPD Accredited 3 Courses Bundle Course 01: LOLER Training Course 02: Manual Handling Training Course 03: PUWER ** Special Offer: Free PDF and Hard Copy Certificates** Key Benefits Get instant PDF and Hard Copy certificate Fully online courses Developed by professionals Self-paced learning and laptop, tablet, and smartphone-friendly 24/7 Learning Assistance Course Curriculum: Module 01: Introduction to LOLER Module 02: Part 01 - Selecting Lifting Equipment and Accessories Module 03: Part 02 - Selecting Lifting Equipment and Accessories Module 04: Planning the Lifting Operation Module 05: Factors Affecting Safe Lifting Operation Module 06: Roles and Responsibilities Module 07: Risk Assessment Module 08: Examination and Inspection Module 09: Reports and Defects Course Assessment You will immediately be given access to a specifically crafted MCQ test upon completing each LOLER Training - CPD Accredited 3 Courses Bundle bundle course. For each test, the pass mark will be set to 60%. Accredited Certificate After successfully completing this LOLER Training - CPD Accredited 3 Courses Bundle course, you will qualify for the CPD Quality Standards (CPD QS) certified certificate from Training Express. CPD 30 CPD hours / points Accredited by The CPD Quality Standards (CPD QS) Who is this course for? The LOLER Training - CPD Accredited 3 Courses Bundle training is ideal for highly motivated individuals or teams who want to enhance their skills and efficiently skilled employees. Requirements There are no formal entry requirements for the course, with enrollment open to anyone! Career path Learn the essential skills and knowledge you need to excel in your professional life with the help & guidance from our LOLER Training - CPD Accredited 3 Courses Bundle training.

🌟 LOLER Training Course Overview   Unlock the potential for safer and more efficient lifting operations with our comprehensive LOLER Training Course. Designed for professionals and organizations involved in lifting equipment operations, this course is a vital investment in ensuring compliance, safety, and proficiency in lifting operations. Course Highlights:   🔍 Module 1: Introduction to LOLER Gain a solid understanding of the Lifting Operations and Lifting Equipment Regulations (LOLER) to establish a strong foundation for compliance. Explore the key principles, definitions, and legal obligations outlined in LOLER.   🔧 Module 2: LOLER Inspection Procedures Master the essential skills required for thorough LOLER inspections. Learn systematic inspection procedures to identify potential hazards, assess equipment conditions, and ensure compliance with safety standards.   🏗️ Module 3: Selecting and Using Lifting Equipment Acquire in-depth knowledge of various lifting equipment types and their applications. Understand the criteria for selecting the right equipment for specific lifting tasks and learn safe operating practices.   📑 Module 4: Planning and Organizing Lifting Operations Develop expertise in planning and organizing lifting operations effectively. Learn to assess risks, create detailed lifting plans, and implement control measures to ensure the safety and success of lifting operations.   🔧 Module 5: Maintaining Lifting Equipment Explore best practices for the regular maintenance of lifting equipment to ensure longevity and reliability. Understand the importance of routine inspections and maintenance schedules to prevent breakdowns and enhance equipment performance. Key Benefits: Compliance Assurance: Stay updated with the latest LOLER regulations and ensure your organization operates within legal parameters. Enhanced Safety: Equip yourself and your team with the knowledge to identify and mitigate potential risks, fostering a safer working environment. Operational Efficiency: Streamline lifting operations through effective planning, organization, and the proper use of equipment. Skill Development: Hone your skills in LOLER inspection, equipment selection, and maintenance, making you an invaluable asset in the workplace. Industry Recognition: Gain a competitive edge by demonstrating a commitment to safety and compliance in lifting operations.   Invest in your team's competence and safety by enrolling in our LOLER Training Course today. Elevate your lifting operations to new heights with knowledge, expertise, and confidence. Course Curriculum Module 1_ Introduction to LOLER Introduction to LOLER 00:00 Module 2_ LOLER Inspection Procedures LOLER Inspection Procedures 00:00 Module 3_ Selecting and Using Lifting Equipment Selecting and Using Lifting Equipment 00:00 Module 4_ Planning and Organizing Lifting Operations Planning and Organizing Lifting Operations 00:00 Module 5_ Maintaining Lifting Equipment Maintaining Lifting Equipment 00:00

How often do we underestimate the importance of risk assessment, until a cautionary tale like this forces us to reconsider? Dive into our comprehensive bundle... Dive into our comprehensive Safety in Confined Spaces: Regulations and Risk Assessment bundle that consists of eight meticulously crafted courses: Working in Confined Spaces, Work At Height Training, Lone Worker Safety, RIDDOR Training, DSEAR Training, LOLER Training, COSHH - Control of Substances Hazardous to Health, and Level 2 Health and Safety in the Workplace. This collection has been designed to equip you with the knowledge necessary for safe operations in various environments. The primary purpose of this course bundle is to instil a thorough understanding of the regulations and risk assessment procedures required in these unique work situations. The Eight CPD Accredited courses that the bundle includes are: Course 1: Working in Confined Spaces Course 2: Work At Height Training Course 3: Lone Worker Safety Course 4: RIDDOR Training Course 5: DSEAR Training Course 6: LOLER Training Course 7: COSHH - Control of Substances Hazardous to Health Course 8: Level 2 Health and Safety in the Workplace Learning Outcomes: Upon completion of the Safety in Confined Spaces: Regulations and Risk Assessment Bundle, you will be able to: Understand the fundamental regulations concerning working in confined spaces. Gain knowledge of safety measures when working at height. Recognise the protocols for lone worker safety. Grasp the intricacies of RIDDOR, DSEAR, LOLER and COSHH regulations. Attain Level 2 competency in Health and Safety in the Workplace. Master the art of risk assessment across diverse environments. Working in Confined Spaces: Understand operating in restricted areas' nuances and safety regulations. Work At Height Training: Learn the precautions and guidelines for working at elevated locations. Lone Worker Safety: Equip yourself with safety protocols tailored for solo working situations. RIDDOR Training: Delve deep into the Reporting of Injuries, Diseases and Dangerous Occurrences Regulations. DSEAR Training: Familiarise with the Dangerous Substances and Explosive Atmospheres Regulations. LOLER Training: Unravel the Lift Operations and Lifting Equipment Regulations. COSHH - Control of Substances Hazardous to Health: Recognise the guidelines for handling and storing hazardous materials. Level 2 Health and Safety in the Workplace: Attain workplace safety and risk assessment proficiency. CPD 80 CPD hours / points Accredited by CPD Quality Standards Who is this course for? This Safety in Confined Spaces: Regulations and Risk Assessment Bundle is perfect for: Individuals keen on understanding workplace safety regulations. Professionals responsible for health and safety compliance. Managers overseeing teams in confined spaces or at height. Training supervisors looking to improve safety protocols. Companies wanting to enhance their risk assessment methodologies. Requirements Without any formal requirements, you can delightfully enrol in this Safety in Confined Spaces: Regulations and Risk Assessment Bundle. Career path Our Safety in Confined Spaces: Regulations and Risk Assessment Bundle will prepare you for a range of careers, including: Safety Officer: £25K-40K/year. Risk Assessment Specialist: £30K-50K/year. Compliance Manager: £40K-65K/year. Health and Safety Advisor: £28K-45K/year. Lone Worker Monitor: £23K- 37K/year. Site Inspector (Confined Spaces): £27K-42K/year. Regulations Trainer: £30K-48K/year. Certificates CPD Certificate Of Completion Digital certificate - Included 8 Digital Certificates Are Included With This Bundle CPD Quality Standard Hardcopy Certificate (FREE UK Delivery) Hard copy certificate - £9.99 Hardcopy Transcript: £9.99

Gain the skills and credentials to kickstart a successful career and learn from the experts with this step-by-step

Register on the LOLER Training today and build the experience, skills and knowledge you need to enhance your professional development and work towards your dream job. Study this course through online learning and take the first steps towards a long-term career. The course consists of a number of easy to digest, in-depth modules, designed to provide you with a detailed, expert level of knowledge. Learn through a mixture of instructional video lessons and online study materials. Receive online tutor support as you study the course, to ensure you are supported every step of the way. Get an e-certificate as proof of your course completion. The LOLER Training is incredibly great value and allows you to study at your own pace. Access the course modules from any internet-enabled device, including computers, tablet, and smartphones. The course is designed to increase your employability and equip you with everything you need to be a success. Enrol on the now and start learning instantly! What You Get With The LOLER Training Receive a e-certificate upon successful completion of the course Get taught by experienced, professional instructors Study at a time and pace that suits your learning style Get instant feedback on assessments 24/7 help and advice via email or live chat Get full tutor support on weekdays (Monday to Friday) Course Design The course is delivered through our online learning platform, accessible through any internet-connected device. There are no formal deadlines or teaching schedules, meaning you are free to study the course at your own pace. You are taught through a combination of Video lessons Online study materials Certification Upon successful completion of the course, you will be able to obtain your course completion e-certificate free of cost. Print copy by post is also available at an additional cost of £9.99 and PDF Certificate at £4.99. Who Is This Course For: The course is ideal for those who already work in this sector or are an aspiring professional. This course is designed to enhance your expertise and boost your CV. Learn key skills and gain a professional qualification to prove your newly-acquired knowledge. Requirements: The online training is open to all students and has no formal entry requirements. To study the LOLER Training, all your need is a passion for learning, a good understanding of English, numeracy, and IT skills. You must also be over the age of 16.  Course Content Module 01: Introduction to LOLER Introduction to LOLER 00:19:00 Module 02: Part 01 - Selecting Lifting Equipment and Accessories Part 01 - Selecting Lifting Equipment and Accessories 01:01:00 Module 03: Part 02 - Selecting Lifting Equipment and Accessories Part 02 - Selecting Lifting Equipment and Accessories 00:40:00 Module 04: Planning the Lifting Operation Planning the Lifting Operation 00:40:00 Module 05: Factors Affecting Safe Lifting Operation Factors Affecting Safe Lifting Operation 00:23:00 Module 06: Roles and Responsibilities Roles and Responsibilities 00:15:00 Module 07: Risk Assessment Risk Assessment 00:27:00 Module 08: Examination and Inspection Examination and Inspection 00:33:00 Module 09: Reports and Defects Reports and Defects 00:18:00 Frequently Asked Questions Are there any prerequisites for taking the course? There are no specific prerequisites for this course, nor are there any formal entry requirements. All you need is an internet connection, a good understanding of English and a passion for learning for this course. Can I access the course at any time, or is there a set schedule? You have the flexibility to access the course at any time that suits your schedule. Our courses are self-paced, allowing you to study at your own pace and convenience. How long will I have access to the course? For this course, you will have access to the course materials for 1 year only. This means you can review the content as often as you like within the year, even after you've completed the course. However, if you buy Lifetime Access for the course, you will be able to access the course for a lifetime. Is there a certificate of completion provided after completing the course? Yes, upon successfully completing the course, you will receive a certificate of completion. This certificate can be a valuable addition to your professional portfolio and can be shared on your various social networks. Can I switch courses or get a refund if I'm not satisfied with the course? We want you to have a positive learning experience. If you're not satisfied with the course, you can request a course transfer or refund within 14 days of the initial purchase. How do I track my progress in the course? Our platform provides tracking tools and progress indicators for each course. You can monitor your progress, completed lessons, and assessments through your learner dashboard for the course. What if I have technical issues or difficulties with the course? If you encounter technical issues or content-related difficulties with the course, our support team is available to assist you. You can reach out to them for prompt resolution.

Register on the Rigging and Lifting today and build the experience, skills and knowledge you need to enhance your professional development and work towards your dream job. Study this course through online learning and take the first steps towards a long-term career. The course consists of a number of easy to digest, in-depth modules, designed to provide you with a detailed, expert level of knowledge. Learn through a mixture of instructional video lessons and online study materials. Receive online tutor support as you study the course, to ensure you are supported every step of the way. Get a digital certificate as proof of your course completion. The Rigging and Lifting is incredibly great value and allows you to study at your own pace. Access the course modules from any internet-enabled device, including computers, tablet, and smartphones. The course is designed to increase your employability and equip you with everything you need to be a success. Enrol on the now and start learning instantly! What You Get With The Rigging and Lifting Receive a e-certificate upon successful completion of the course Get taught by experienced, professional instructors Study at a time and pace that suits your learning style Get instant feedback on assessments 24/7 help and advice via email or live chat Get full tutor support on weekdays (Monday to Friday) Course Design The course is delivered through our online learning platform, accessible through any internet-connected device. There are no formal deadlines or teaching schedules, meaning you are free to study the course at your own pace. You are taught through a combination of Video lessons Online study materials Certification Upon successful completion of the course, you will be able to obtain your course completion e-certificate free of cost. Print copy by post is also available at an additional cost of £9.99 and PDF Certificate at £4.99. Who Is This Course For: The course is ideal for those who already work in this sector or are an aspiring professional. This course is designed to enhance your expertise and boost your CV. Learn key skills and gain a professional qualification to prove your newly-acquired knowledge. Requirements: The online training is open to all students and has no formal entry requirements. To study the Rigging and Lifting, all your need is a passion for learning, a good understanding of English, numeracy, and IT skills. You must also be over the age of 16. Course Content Module 01: Introduction to Rigging and Lifting Introduction to Rigging and Lifting 00:25:00 Module 02: Pre-requirements for a Worksite Pre-requirements for a Worksite 00:40:00 Module 03: Guidance on Rigging and Lifting Equipment - Part 1 Guidance on Rigging and Lifting Equipment - Part 1 00:40:00 Module 04: Guidance on Rigging and Lifting Equipment - Part 2 Equipment for Rigging and Lifting and their Legislation and Guidance (Part 2) 00:50:00 Module 05: Basic Calculation of Load's Weight and Sling's Angles and Pressure Basic Calculation of Load's Weight and Sling's Angles and Pressure 00:20:00 Module 06: Hitches in Rigging and Lifting Hitches in Rigging and Lifting 00:15:00 Module 07: Rigging and Lifting Devices (Part 1) Rigging and Lifting Devices (Part 1) 00:35:00 Module 08: Rigging and Lifting Devices (Part 2) Rigging and Lifting Devices (Part 2) 00:30:00 Module 09: Rigging and Lifting Devices (Part 3) Rigging and Lifting Devices (Part 3) 00:15:00 Module 10: Lifting and Hoisting Instruments Lifting and Hoisting Instruments 00:45:00 Module 11: Scaffolding and Ladders Scaffolding and Ladders 00:35:00 Module 12: Safety Devices for Protection Safety Devices for Protection 00:30:00 Frequently Asked Questions Are there any prerequisites for taking the course? There are no specific prerequisites for this course, nor are there any formal entry requirements. All you need is an internet connection, a good understanding of English and a passion for learning for this course. Can I access the course at any time, or is there a set schedule? You have the flexibility to access the course at any time that suits your schedule. Our courses are self-paced, allowing you to study at your own pace and convenience. How long will I have access to the course? For this course, you will have access to the course materials for 1 year only. This means you can review the content as often as you like within the year, even after you've completed the course. However, if you buy Lifetime Access for the course, you will be able to access the course for a lifetime. Is there a certificate of completion provided after completing the course? Yes, upon successfully completing the course, you will receive a certificate of completion. This certificate can be a valuable addition to your professional portfolio and can be shared on your various social networks. Can I switch courses or get a refund if I'm not satisfied with the course? We want you to have a positive learning experience. If you're not satisfied with the course, you can request a course transfer or refund within 14 days of the initial purchase. How do I track my progress in the course? Our platform provides tracking tools and progress indicators for each course. You can monitor your progress, completed lessons, and assessments through your learner dashboard for the course. What if I have technical issues or difficulties with the course? If you encounter technical issues or content-related difficulties with the course, our support team is available to assist you. You can reach out to them for prompt resolution.

Understanding the importance of safe lifting operations is vital across many industries. The LOLER Training course offers a detailed exploration of the Lifting Operations and Lifting Equipment Regulations, providing essential knowledge for anyone involved in the selection, inspection, and management of lifting equipment. Through this course, learners gain a clear grasp of the responsibilities and factors influencing safe lifting operations, helping to ensure equipment is used correctly and safely at all times. This CPD accredited course guides participants through key aspects such as planning lifts, assessing risks, and recognising defects in equipment. It is designed to suit professionals seeking to deepen their knowledge without the need for physical attendance, making it an ideal choice for those balancing busy schedules. With a strong focus on regulations and best practices, the training supports a safer working environment by enhancing awareness and understanding of all relevant LOLER provisions. Course Curriculum: Module 01: Introduction to LOLER Module 02: Part 01 - Selecting Lifting Equipment and Accessories Module 03: Part 02 - Selecting Lifting Equipment and Accessories Module 04: Planning the Lifting Operation Module 05: Factors Affecting Safe Lifting Operation Module 06: Roles and Responsibilities Module 07: Risk Assessment Module 08: Examination and Inspection Module 09: Reports and Defects Course Assessment You will immediately be given access to a specifically crafted MCQ test upon completing an online module. For each test, the pass mark will be set to 60%. Accredited Certificate After successfully completing this LOLER Training - CPD Accredited course, you will qualify for the CPD Quality Standards (CPD QS) certified certificate from Training Express. CPD 10 CPD hours / points Accredited by The CPD Quality Standards (CPD QS) Who is this course for? The LOLER Training - CPD Accredited training is ideal for highly motivated individuals or teams who want to enhance their skills and efficiently skilled employees. Requirements There are no formal entry requirements for the course, with enrollment open to anyone! Career path Learn the essential skills and knowledge you need to excel in your professional life with the help & guidance from our LOLER Training - CPD Accredited training.

Master the essentials of construction site supervision with this CPD-accredited bundle designed to elevate your professional knowledge. This online programme combines three focused courses—Construction Site Management, Level 3 Health & Safety in the Workplace Training, and LOLER Training—offering a clear pathway for those looking to advance their understanding of site operations, safety legislation, and lifting equipment regulations. Whether you oversee teams or handle safety responsibilities, this course bundle sharpens your awareness of site protocols and strengthens your decision-making in a construction setting. Fully accessible online with no scheduling constraints, the content is delivered through structured, digestible modules, perfect for professionals aiming to deepen their theoretical knowledge. Learn the fundamentals of site coordination, risk prevention, and regulatory obligations—all without the need for onsite attendance. From hazard identification to understanding the legal frameworks that govern lifting operations, this course bundle helps refine your managerial approach with clarity and confidence. Ideal for those already in the industry or preparing for greater responsibility in construction site oversight. Course 01: Construction Site Management Course 02: Level 3 Health & Safety In The Workplace Training Course 03: LOLER Training **Special Offer: Free PDF and Hard Copy Certificates** Key Benefits Get instant PDF and Hard Copy certificate Fully online courses Self-paced learning and laptop, tablet, and smartphone-friendly 24/7 Learning Assistance Course Curriculum: Construction Site Management Module 01: Introduction to Construction Management Module 02: Site Management Module 03: Cost Estimation Module 04: Cost Management Module 05: Planning and Management of Equipment Module 06: Construction Materials Management Module 07: Stock Control Module 08: Supply Chain Management Module 09: Preliminary Site Investigation and Site Organisation Module 10: Vendor Analysis in Construction Management Course Assessment You will immediately be given access to a specifically crafted MCQ test upon completing each Construction Site Management - CPD Accredited 3 Courses Bundle bundle course. For each test, the pass mark will be set to 60%. Accredited Certificate After successfully completing this Construction Site Management - CPD Accredited 3 Courses Bundle course, you will qualify for the CPD Quality Standards (CPD QS) certified certificate from Training Express. CPD 30 CPD hours / points Accredited by The CPD Quality Standards (CPD QS) Who is this course for? The Construction Site Management - CPD Accredited 3 Courses Bundle training is ideal for highly motivated individuals or teams who want to enhance their skills and efficiently skilled employees. Requirements There are no formal entry requirements for the course, with enrollment open to anyone! Career path Learn the essential skills and knowledge you need to excel in your professional life with the help & guidance from our Construction Site Management - CPD Accredited 3 Courses Bundle training.

NPORS Appointed Person Course or Training NPORS Appointed Person Lifting Operations Training is aimed at anyone who is required to plan safe systems of work using lifting equipment and to gain the NPORS Appointed Person operator card. The aim of the course is to provide candidates with underpinning knowledge to prepare them for the role and responsibility. It is recommended that prior to attending this course individuals should have some experience of working with lifting equipment, especially mobile cranes. It is important that all delegates have a good understanding of spoken and written English for the appointed person course. NPORS is an approved CSCS Partner Card Scheme, firstly providing evidence that individuals working on construction sites have the appropriate training and qualifications but more importantly for the safe operation of the appointed person. Furthermore, training criteria is based on the approved standards of the Construction leadership Council. Experienced Appointed Person Test For experienced Appointed Persons you must complete a 1 day refresher training course. For refresher training you must have held a certificate or card in the past Appointed Person Course Duration: Experienced Worker Test: 1 day refresher training, maximum of 6 candidates Novice: 5 day’s training, maximum of 6 candidates Location*: Tewkesbury or at our clients’ site nationwide Mileage and accommodation charges may apply Certification NPORS Traditional card – lasts for 5 years and is mainly accepted with housebuilders, utilities, port and marine as proof of competence OR NPORS card with CSCS logo – accepted by all major building contractor’s. The initial card is the RED trained operator card which lasts for 2 years and can be upgraded to BLUE competent operator card further to completion of relevant NVQ. CSCS Health & Safety Test If you require the NPORS Appointed Person Red operator card with the CSCS logo on then you must have completed the operatives health and safety test within the last two years. In house certificates: suitable as proof of operator competence accepted for insurance and HSE compliance. The Appointed Person Course Includes: This Appointed Person Course covers essential legislation, crane appreciation, lifting accessories, and planning lifting operations. It culminates in writing a risk assessment and method statement. Legislation LOLER, PUWER, HASAWA. Codes of practice BS7121. Roles and responsibilities of personnel involved with lifting operations. Crane appreciation, crane types, capabilities and limitations. Duty charts. Crane terminology. Documentation and certification for lifting equipment and lifting accessories. Crane stability/ground conditions. Safe Load Indicators (SLI) and Safe Working Loads (SWL). Lifting accessories. Types of accessories and use. Slinging techniques. Down rating of accessories. Sling angles. Communications. Planning a lifting operation. Writing a risk assessment (end test). Writing a method statement (end test). Appointed Person Training Available 7 days a week to suit your business requirements. VPT have a team of friendly and approachable instructors, who have a wealth of knowledge of lifting equipment and the construction industry We have our own training centre conveniently located close to the M5 junction 9, In Tewkesbury. With its own purpose-built practical training area to simulate an actual working environment for the AP Course. Our Appointed Person training and test packages are priced to be competitive. Discounts are available for multiple bookings We can send a fully qualified NPORS Appointed Person Tester to your site nationwide, to reduce the amount of time away from work Frequently Asked Questions 1. What is the NPORS Appointed Person Lifting Operations Training? This training is designed for individuals required to plan safe systems of work using lifting equipment. It provides the knowledge necessary to prepare for the role and responsibilities of an Appointed Person. 2. Who should take this course? Anyone involved in planning and managing lifting operations, especially those with prior experience with lifting equipment, should take this course. 3. What does the course cover? The course covers legislation, codes of practice, roles and responsibilities, types of cranes, duty charts, lifting accessories, risk assessment, and method statement preparation. 4. How long is the course? The course duration is 5 days for novices and 1 day for experienced individuals seeking a refresher. 5. What certification do I receive upon completion? Participants receive an NPORS Appointed Person operator card, valid for 5 years or an NPORS card with CSCS logo. 6. Are there any prerequisites? Candidates should have a good understanding of English. For the NPORS card with CSCS logo, a CSCS Health & Safety test must have been completed within the last two years. Our more courses: Polish your abilities with our dedicated Lift Supervision Training, Slinger Signaller Training, Telehandler Training, Cat & Genny Training, Plant Loader Securer, Ride-On Road Roller, Abrasive Wheel Training, Lorry Loader Training and Scissor Lift Training sessions. Learn the safe and effective operation of these vital machines, crucial for construction and maintenance tasks. Elevate your skills and career prospects by enrolling in our comprehensive courses today.

Course Overview This comprehensive course offers essential knowledge for anyone involved in manual handling, lifting operations, and workplace safety. Combining critical modules such as LOLER training, working at height, and confined space awareness, this course equips learners with the expertise to identify potential hazards, assess risk, and follow safety protocols effectively. Whether you're looking to enhance your understanding of lifting procedures or ensure compliance with UK health and safety standards, this course provides structured learning designed to support a safer working environment. Upon completion, learners will be able to demonstrate awareness of regulations, apply risk assessment principles, and contribute to maintaining safety standards across various industries. This is an ideal course for those responsible for managing workplace operations, lifting tasks, and site-based safety procedures. Course Description The "Manual Handling, Rigging and Lifting & Safety in the Workplace" course covers a broad range of safety-related topics tailored to warehousing, construction, manufacturing, and logistics settings. Learners will explore core areas such as load lifting techniques, height safety, forklift operations, and compliance with the Lifting Operations and Lifting Equipment Regulations (LOLER). The course also addresses the risks associated with working in confined spaces and warehouse environments, promoting a thorough understanding of safe working procedures and legal obligations. Through a structured, self-paced online platform, learners will develop a strong foundation in identifying risks, following safety protocols, and adhering to health and safety legislation. Whether enhancing existing skills or exploring a new career path, this course provides a well-rounded approach to workplace safety and equipment handling in accordance with UK regulatory standards. Course Modules: Module 01: Manual Handling Training Course Module 02: Work At Height Training Module 03: Warehouse Operative Module 04: Forklift Training - Online Course Module 05: Rigging and Lifting Module 06: Working in Confined Spaces Module 07: LOLER Training Module 08: Level 2 Health and Safety in the Workplace (See full curriculum) Who is this course for? Individuals seeking to improve their knowledge of workplace safety and equipment regulations. Professionals aiming to develop or formalise their understanding of lifting operations and manual handling. Beginners with an interest in occupational safety, logistics, or industrial environments. Employers and supervisors looking to ensure their team meets regulatory safety standards. Career Path Warehouse Operative Health and Safety Officer Logistics Coordinator Site Supervisor Forklift or Lifting Equipment Operator Facilities or Operations Manager Construction or Manufacturing Support Staff