559 Industry courses in Waltham Cross

REFERENCE CODE 601/8330/5 COURSE LEVEL NVQ Level 2 THIS COURSE IS AVAILABLE IN Course Overview This qualification is aimed at those who are involved in installing roof sheeting and cladding systems and associated tasks on site working from drawings and specifications. It is not expected that candidates working in this industry all do the same activities or use the same equipment and machinery so there is a group of optional units to cover these matters, however all candidates will need to prove competence in preparing the resources required, installation of sheeting and cladding systems and rainwater goods (gutters, pipes, downpipes and angles (swan necks, off sets), brackets and supports, sumps, overflows and outlets). All work completed must be carried out in accordance with Building Regulations and Industry recognised safe working practices, including the disposal of waste. The qualification is structured to ensure that there is a high degree of flexibility within the units available and will allow employees from companies of all sizes and specialisms equal opportunity to complete. To provide this opportunity in addition to the core skills above, candidates will also be able to select optional units recognising skills including, repair and/or refurbishment of roof sheeting/cladding/rainscreen systems, working with boom and/or scissor type mobile elevating platforms (MEWPs), installing solar collectors, use of ergonomic manipulating machines or slinging/signalling the movement of loads.

Private German Lessons Private German lessons are ideal for busy professionals wanting to learn German. We teach German in-person at offices and homes and can start throughout the year. Flexible lesson timings from week to week allow our German lessons to fit into a busy schedule. Our beginner, intermediate and advanced German lessons cover comprehension, speaking, reading, writing, vocabulary build-up and grammar. We assess every student’s level and aptitude before starting. Lessons will then progress at their pace, and we structure our German courses towards industry and profession. One-to-One German Lessons Every student benefits from one designated private German tutor. Tutor-continuity ensures good rapport and enables the tutor to consider the student’s strengths and abilities. We recommend one-to-one German lessons twice a week with sufficient time between lessons for self-study and homework for rapid progress. Beginners should have a basic understanding of German after a few sittings. Returning learners will find their German fluency and confidence rapidly improving. German Language Lessons Being independent of the academic year means starting at any time. Students can adjust lesson timings on a week-to-week basis. This flexibility, combined with course delivery on-site, in-company and online, makes it possible to integrate our German language courses into a busy schedule.

REFERENCE CODE 600/6511/4 COURSE LEVEL NVQ Level 2 THIS COURSE IS AVAILABLE IN Course Overview This qualification is aimed at those who are involved in plastering activities in the workplace. It is not expected that candidates working in this industry all do the same activities so the qualification has been developed to allow opportunities for those carrying out work in any one of the following broad categories: solid basic plastering, solid full plastering, basic fibrous plastering and full fibrous plastering. Those taking the qualification must also prove knowledge and competence in working at heights, calculating quantities and wastage and the use of powered and hand tools and equipment. All work completed must be done in accordance with building regulations and industry recognised safe working practices, including the disposal of waste. The qualification is structured to ensure that there is a high degree of flexibility within the units available and will allow employees from companies of all sizes and specialisms equal opportunity to complete. To provide this opportunity in addition to the core skills above, candidates will also be able to select optional units recognising skills including, working with direct bond dry linings, laying sand and cement screeds, installing mechanically fixed plasterboard and carrying out repair work. The standards cover the most important aspects of the job. This qualification is at Level 2, although some units may be at different levels and should be taken by those who are fully trained to deal with routine assignments. Candidates should require minimum supervision in undertaking the job

Who would find this course useful? This is useful if you have some coding skills already. This course is fast-paced, not quite at the basics level.

This course is designed to assist those on site who have responsibility for managing all forms of...

REFERENCE CODE 603/5204/8 COURSE LEVEL NVQ Level 3 THIS COURSE IS AVAILABLE IN Course Overview Who is this Qualification for? This qualification is aimed those who carry out supervisory activities in a specific trade in the Construction Industry. The qualification certificate will carry an endorsement to show what trades the candidate was supervising during completion of this qualification. The qualification has a core group of 5 mandatory units that cover areas including Health and Safety, confirming work requirements and coordinating work operations. The qualification also has a group of optional units to allow flexibility to suit individual needs and responsibilities and completion of mandatory units and a minimum of 2 units from the optional group will give access to the relevant CSCS card. This qualification replaces version 1 of the GQA Level 3 NVQ Diploma in Occupational Work Supervision (Construction) QAN 601/3469/0 for anyone starting the qualification from 01/11/2019. What is required from candidates? This qualification consists of 5 mandatory units, which have a total of 57 credits and a group of optional units. Candidates must complete all 5 mandatory units and a minimum of 2 units from the optional group. GQA qualifications are made up of units that have a credit value or credits. These credits must be achieved in the correct combination of mandatory and optional units. Qualifications are now required to indicate the total qualification time (TQT), this is to show the typical time it will take someone to attain the required skills and knowledge to meet the qualification criteria. The units of assessment set out learning outcomes which describe what learners need to be able to do and understand. The learning outcomes are defined by assessment criteria which are used to assess competence, expressed as skills achieved and learned knowledge and understanding, to achieve the units. Achievement of the mandatory units and chosen optional units will mean the qualification has been completed and will be subject to approval of a claim for certification. GQA Qualifications will issue a certificate complete with the learner’s name, the qualification and unit titles and the credits achieved. Mandatory units Level Credit Confirming Work Activities and Resources for an Occupational Work Area in the Workplace Developing and Maintaining Good Occupational Working Relationships in the Workplace Confirming the Occupational Method of Work in the Workplace Implementing and maintaining health, safety and welfare in the workplace Coordinating and organising work operations in the workplace Optional Units – Minimum of 2 units (19 credits must be achieved) Allocating and monitoring the use of plant, machinery, equipment or vehicles in the workplace Monitoring progress of work against schedules in the workplace Confirming work meets contractual, industry and manufacturers’ standards in the workplace Implementing procedures to support the team performance in the workplace 3 13 Co-ordinating and confirming the dimensional control requirements of the work in the workplace Entry requirements There are no formal entry requirements for learners undertaking this qualification. However, centres must ensure that learners have the potential and opportunity to gain the qualification successfully. Qualification support This qualification has been designed and developed by CITB and GQA Qualifications have authorised Oscar Onsite Academy to deliver this qualification in the Construction Sector. Please Note that photocopied or downloaded documents such as manufacturers or industry guidance, H&S policies, Risk Assessments etc, are not normally acceptable evidence for Oscar Onsite Qualifications unless accompanied by a record of a professional discussion or Assessor statement confirming candidate knowledge of the subject. If you are in any doubt about the validity of evidence, please contact Oscar Onsite Academy

REFERENCE CODE 601/8331/7 COURSE LEVEL NVQ Level 3 THIS COURSE IS AVAILABLE IN Course Overview This qualification is aimed at those who are involved in installing Rainscreen wall cladding systems and/or roof sheeting and cladding systems that involve curved and complex roof and wall formations in the workplace, working from drawings and specifications. It is not expected that candidates working in this industry all do the same activities or use the same equipment and machinery so the qualification has been developed to make it as widely available as possible by having 2 distinct pathways. All work completed must be carried out in accordance with Building Regulations and Industry recognised safe working practices, including the disposal of waste. The qualification is structured to ensure that there is a high degree of flexibility within the units available and will allow employees from companies of all sizes and specialisms equal opportunity to complete. To provide this opportunity in addition to the relevant mandatory pathway units of installation of the relevant system (roof and wall sheeting and cladding or rainscreen wall cladding systems) , candidates will also be able to select optional units recognising skills including, repair and/or refurbishment of roof sheeting/cladding/rainscreen systems, working with boom and/or scissor type mobile elevating platforms (MEWPs), installing solar collectors, use of ergonomic manipulating machines or slinging/signalling the movement of loads. The standards cover the most important aspects of the job. This qualification is at Level 3, although some units may be at different levels, qualifications at this level are primarily aimed at those who are fully trained and experienced in a wide range of roles that may involve decision making, quality checks, work planning and dealing with non-routine or complex installations. The qualification consists of 3 mandatory units and 2 pathways, Wall sheeting and cladding and Rainscreen Wall Systems. Candidates must achieve the 3 qualification mandatory units plus the required credits from the selected pathway. The minimum credit value of the Wall sheeting and cladding qualification is 132 credits, the minimum credit value of the Rainscreen wall systems qualification is 104 credits.

NR Medical Training offers the Qualsafe First Response Emergency Care (FREC 3) Level 3 RQF, a nationally accredited qualification ideal for anyone aspiring to be a first responder. This course is tailored for a wide range of professionals, including police officers, firefighters, and event medical staff, as well as roles like Emergency/Community First Responders, Door Supervisors, and Security Guards.

If you want to keep up with the latest trends in business and project management, IIL's International Project Management Day is the must-attend event of the year! Approaching its 19th Anniversary, IPM Day gathers thought leaders, industry experts, and business professionals worldwide for a rich and immersive learning experience. You will gain new knowledge, skills, and best practices to navigate complex projects and adapt to change in a dynamic business landscape. Embrace the need for change and adaptability. By embracing new ideas, perspectives, and approaches we open ourselves up to endless possibilities for growth and improvement. Empower yourself and your teams by providing them with the necessary tools, resources, and support to drive meaningful and sustainable transformation. Evolve and harness the power hidden behind the uncertainty of our current world. Together we can build a brighter, more efficient, and sustainable tomorrow. Use code FINDCOURSES to receive $12 off this event! Up to 26 PDUS Keynotes The Key to Project Management Leadership Success: Engaging Your Team Members The Missing Piece in Leadership Styles & Practices AI in Project Management & Business: Panel Discussion Presentations Embracing Hybrid Ways of Working Project Management 4.0, PMO Mindset, and Project Manager Power Skills Maximizing Team Performance: The Intersection of Brain Chemistry and Team Building Becoming the Warrior: Strategies for Achieving Goals Arrows in Your Project Management Quiver Excel Tips & Tricks You Probably Haven't Seen Before Unleashing the Potential of a Distributed Workforce From Risks to Requirements - An Approach to Project Initiation Practical Implications of Artificial Intelligence to the Project Management Community Smart City Lab - Project Perspective Inclusive Leadership: Building Great Companies on Purpose Self-Paced Courses Kanban: A Beginner's Guide to Getting Started Understanding Lean Fundamentals

Company Accounting - tax return, Annual accounts and Annual return Training Course If you want to work in a Finance or Tax department of a business or as an accountant in well-known accountancy firms it is vital that you know how to prepare accounts for the company and submit them to the right places. This UK Tax accounting course will upgrade your skills to higher level. Completing this course will enable you learn more about the procedures involved in submitting Corporate Tax Return. Once you are skilled on this, you can offer this as a service to potential business clients and earn £££. If you are running a business you can process your own Business Tax return and Accounts, instead of paying someone else to do it. It will save a lot of money (£££) every year. You will stay ahead of the competition if you are looking for a job in the Accounting or Tax Industry once you are skilled Business Accounting and Tax procedures. Identifying requirements to set up a UK Company Identifying Statutory Requirements for Companies Introduction to Confirmation Statement processing Identifying Types of Companies based on size Identifying Types and requirements of various Submissions available Identifying minimum requirements in a Balance Sheet and Profit & Loss Account Identifying Tax Return periods and deadlines Identifying Penalties for Late filing Identifying Closing Down Procedures for Companies Introduction to the Filing Company accounts procedure Company house forms and correspondences Understanding of IXBRL requirements Understanding submission procedures using HMRC Online CT600 (Webfiling) Using one Business(SME/Micro Entity) case to understand the procedures on Annual Submission for Company Tax Return and Accounts submission