Nottinghamshire

This qualification enables you, the learner, to demonstrate and recognise your skills, knowledge and understanding and to demonstrate your competence in a real workplace environment so you can work as a Plant Operator -Fork Lift Trucks within the construction industry. You will be assessed against a set of performance and knowledge statements which have been derived from National Occupational Standards for your occupational area. You will be assessed by an occupationally competent and qualified assessor whose job is to work with you and help you complete your qualification. This qualification supports the learner to attain enabling, fundamental and transferable practical skills with associated underpinning knowledge. The learner will cover key practical skills and knowledge in these mandatory units:&nbsp;<ul fr-original-style="" style="box-sizing: border-box;"><li style="color: rgb(0, 43, 81); box-sizing: border-box;" fr-original-style=" color: rgb(0, 43, 81);">Conforming to General Health, Safety and Welfare in the Workplace&nbsp;</li><li style="color: rgb(0, 43, 81); box-sizing: border-box;" fr-original-style=" color: rgb(0, 43, 81);">Conforming to Productive Working Practices in the Workplace.&nbsp;</li></ul>The learner will also learn key practical skills and knowledge in one of the following optional units:<ul fr-original-style="" style="box-sizing: border-box;"><li style="color: rgb(0, 43, 81); box-sizing: border-box;" fr-original-style=" color: rgb(0, 43, 81);">&nbsp;Preparing and operating rough terrain masted forklifts to lift and transfer loads in the workplace</li><li style="color: rgb(0, 43, 81); box-sizing: border-box;" fr-original-style=" color: rgb(0, 43, 81);">&nbsp;Preparing and operating industrial forklift trucks to lift and transfer loads in the workplace</li><li style="color: rgb(0, 43, 81); box-sizing: border-box;" fr-original-style=" color: rgb(0, 43, 81);">&nbsp;Preparing and operating sideloader forklifts to lift and transfer loads in the workplace</li><li style="color: rgb(0, 43, 81); box-sizing: border-box;" fr-original-style=" color: rgb(0, 43, 81);">&nbsp;Preparing and operating telescopic handlers to lift and transfer in the workplace&nbsp;</li><li style="color: rgb(0, 43, 81); box-sizing: border-box;" fr-original-style=" color: rgb(0, 43, 81);">Preparing and operating reach trucks to lift and transfer loads in the workplace.</li></ul><h3 style="color: rgb(0, 43, 81); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 43, 81);">Entry Requirements</h3><div style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">There are no formal entry requirements to take this qualification. This qualification can be undertaken without any previous training or qualifications in this subject area.</div>

This qualification enables you, the learner, to demonstrate and recognise your skills, knowledge and understanding and to demonstrate your competence in a real workplace environment so you can work as a Plant Operator -Fork Lift Trucks within the construction industry. You will be assessed against a set of performance and knowledge statements which have been derived from National Occupational Standards for your occupational area. You will be assessed by an occupationally competent and qualified assessor whose job is to work with you and help you complete your qualification. This qualification supports the learner to attain enabling, fundamental and transferable practical skills with associated underpinning knowledge.
The learner will cover key practical skills and knowledge in these mandatory units: 
Conforming to General Health, Safety and Welfare in the Workplace
Conforming to Productive Working Practices in the Workplace.
The learner will also learn key practical skills and knowledge in one of the following optional units:
Preparing and operating rough terrain masted forklifts to lift and transfer loads in the workplace
Preparing and operating industrial forklift trucks to lift and transfer loads in the workplace
Preparing and operating sideloader forklifts to lift and transfer loads in the workplace
Preparing and operating telescopic handlers to lift and transfer in the workplace
Preparing and operating reach trucks to lift and transfer loads in the workplace.
Entry Requirements
There are no formal entry requirements to take this qualification. This qualification can be undertaken without any previous training or qualifications in this subject area.

Dynamic Training and Assessments Ltd

Construction

Level 2 NVQ Certificate in Plant Operations - Fork Lift Trucks

General admission

Cardiff

This comprehensive 3-day Level 3 course equips electricians, designers, and inspectors with a thorough understanding of the IET Wiring Regulations 18th Edition (including amendments).Who should attend?<ul fr-original-style="" style="box-sizing: border-box;"><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;"> Qualified electricians seeking to update their knowledge to the latest regulations.</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;"> Designers and inspectors working in the electrotechnical sector.</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;"> Individuals who want to gain a comprehensive grasp of BS 7671.</li></ul>Course Benefits:<ul fr-original-style="" style="box-sizing: border-box;"><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;"> Gain in-depth knowledge of the current IET Wiring Regulations.</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">&nbsp;Ensure your electrical installations comply with industry safety standards.</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">&nbsp;Open doors to further qualifications like NVQ Diplomas, PAT testing, and&nbsp;electrical design.</li></ul>Assessment:Your understanding will be evaluated through a two-hour, 60-question exam.Prerequisites:<ul fr-original-style="" style="box-sizing: border-box;"><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">&nbsp;While there are no formal requirements, a qualified electrician background is recommended.<li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">&nbsp;Learners should be at least 16 years old with basic literacy and numeracy&nbsp;skills.</li></li></ul>Course Materials:<ul fr-original-style="" style="box-sizing: border-box;"><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">&nbsp;A copy of the 18th Edition Wiring Regulations book will be available for&nbsp;purchase during checkout.</li></ul>What to Bring:<ul fr-original-style="" style="box-sizing: border-box;"><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">&nbsp;Photo ID</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">&nbsp;Passport-sized photo</li></ul>Invest in your electrical expertise and career advancement.&nbsp;Stay up-to-date and ensure electrical safety! Our 18th Edition course equips electricians,&nbsp;designers, and inspectors with the latest IET Wiring Regulations knowledge. Get certified,&nbsp;open doors to new opportunities, and guarantee compliant installations. Enrol today!

This comprehensive 3-day Level 3 course equips electricians, designers, and inspectors with a thorough understanding of the IET Wiring Regulations 18th Edition (including amendments).
Who should attend?
Qualified electricians seeking to update their knowledge to the latest regulations.
Designers and inspectors working in the electrotechnical sector.
Individuals who want to gain a comprehensive grasp of BS 7671.
Course Benefits:
Gain in-depth knowledge of the current IET Wiring Regulations.
Ensure your electrical installations comply with industry safety standards.
Open doors to further qualifications like NVQ Diplomas, PAT testing, and electrical design.
Assessment:
Your understanding will be evaluated through a two-hour, 60-question exam.
Prerequisites:
While there are no formal requirements, a qualified electrician background is recommended.
Learners should be at least 16 years old with basic literacy and numeracy skills.
Course Materials:
A copy of the 18th Edition Wiring Regulations book will be available for purchase during checkout.
What to Bring:
Photo ID
Passport-sized photo
Invest in your electrical expertise and career advancement. 
Stay up-to-date and ensure electrical safety! Our 18th Edition course equips electricians, designers, and inspectors with the latest IET Wiring Regulations knowledge. Get certified, open doors to new opportunities, and guarantee compliant installations. Enrol today!

City Training Group

Electrical

Personnel involved in the electrotechnical sector such as electricians, designers and inspectors who wish to update their knowledge to the IET Wiring Regulations Eighteenth Edition. Learners who wish to gain an understanding of BS 7671.


BS7671 Wiring Regulations 18th Edition

General Admission

<h1 id="isPasted" fr-original-style="" style="box-sizing: border-box;">Overview&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</h1><table border="0" cellspacing="0" cellpadding="0" width="671" fr-original-style="" style="border: none; border-collapse: collapse; empty-cells: show; max-width: 100%; box-sizing: border-box;"><tbody fr-original-style="" style="box-sizing: border-box;"><tr fr-original-style="" style="box-sizing: border-box;"><td width="4.470938897168406%" valign="top" fr-original-style="" style="min-width: 5px; box-sizing: border-box; user-select: text; border: 0px solid rgb(221, 221, 221);">&nbsp;</td><td width="95.52906110283159%" valign="top" fr-original-style="" style="min-width: 5px; box-sizing: border-box; user-select: text; border: 0px solid rgb(221, 221, 221);">This course is aimed at candidates that require the knowledge and practical skills to&nbsp;ensure a safe system of work in accordance with the method statement.&nbsp;It will enable the candidate to carry out their duties while complying&nbsp;with the relevant legislation and standards, including LOLER 1998 and BS 7121.</td></tr></tbody></table><h1 fr-original-style="" style="box-sizing: border-box;">Who Should Attend?</h1><table border="0" cellspacing="0" cellpadding="0" width="671" fr-original-style="" style="border: none; border-collapse: collapse; empty-cells: show; max-width: 100%; box-sizing: border-box;"><tbody fr-original-style="" style="box-sizing: border-box;"><tr fr-original-style="" style="box-sizing: border-box;"><td width="4.470938897168406%" valign="top" fr-original-style="" style="min-width: 5px; box-sizing: border-box; user-select: text; border: 0px solid rgb(221, 221, 221);">&nbsp;</td><td width="95.52906110283159%" valign="top" fr-original-style="" style="min-width: 5px; box-sizing: border-box; user-select: text; border: 0px solid rgb(221, 221, 221);">This course is designed for&nbsp;personnel who supervise the lift and follow lift plans for routine and non-routine lifts.Requirements:Experienced operators should have&nbsp;sufficient experience of cranes to meet the requirements specified in British standard 7121 Safe Use of Cranes.&nbsp;Good understanding of spoken and written English.</td></tr></tbody></table><h1 fr-original-style="" style="box-sizing: border-box;">Agenda</h1><table border="0" cellspacing="0" cellpadding="0" width="671" fr-original-style="" style="border: none; border-collapse: collapse; empty-cells: show; max-width: 100%; box-sizing: border-box;"><tbody fr-original-style="" style="box-sizing: border-box;"><tr fr-original-style="" style="box-sizing: border-box;"><td width="4.470938897168406%" valign="top" fr-original-style="" style="min-width: 5px; box-sizing: border-box; user-select: text; border: 0px solid rgb(221, 221, 221);">&nbsp;</td><td width="95.52906110283159%" valign="top" fr-original-style="" style="min-width: 5px; box-sizing: border-box; user-select: text; border: 0px solid rgb(221, 221, 221);">&nbsp;<ul type="disc" fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as a crane / lift supervisor</li><li fr-original-style="" style="box-sizing: border-box;">Explain the importance of locating and identifying different types of lifting equipment and lifting accessories.&nbsp;Explain their basic construction, uses, applications and functions</li><li fr-original-style="" style="box-sizing: border-box;">Demonstrate how to interpret and extract information on all relevant documentation</li><li fr-original-style="" style="box-sizing: border-box;">Explain and demonstrate diverse types of communication methods used for lifting purposes</li><li fr-original-style="" style="box-sizing: border-box;">Explain procedures for placing non-serviceable items out-of-service</li><li fr-original-style="" style="box-sizing: border-box;">Explain the function and use of the RCIs and anti-collision systems and use the information provided</li><li fr-original-style="" style="box-sizing: border-box;">Explain setting up, erection, levelling and dismantling requirements for diverse types of lifting equipment and lifts</li><li fr-original-style="" style="box-sizing: border-box;">Set up exclusion zone explaining actions required for emergency actions and identify overhead hazards</li><li fr-original-style="" style="box-sizing: border-box;">Identify potential hazards and unsafe lifting practices using different lifting scenarios</li><li fr-original-style="" style="box-sizing: border-box;">Explain the importance of checking the security of various types of loads and lifting accessories, explain the procedures ensuring load balance and integrity</li><li fr-original-style="" style="box-sizing: border-box;">Supervise the movement of loads to different types of locations using different methods of communication</li><li fr-original-style="" style="box-sizing: border-box;">Explain all Environmental considerations and explain how factors such as the external area to the lift zone can affect the planning of the lifting operation</li><li fr-original-style="" style="box-sizing: border-box;">Carry out all out-of-service and securing procedures</li></ul>&nbsp;</td></tr></tbody></table><h1 fr-original-style="" style="box-sizing: border-box;">Assessment</h1><table border="0" cellspacing="0" cellpadding="0" width="671" fr-original-style="" style="border: none; border-collapse: collapse; empty-cells: show; max-width: 100%; box-sizing: border-box;"><tbody fr-original-style="" style="box-sizing: border-box;"><tr fr-original-style="" style="box-sizing: border-box;"><td width="4.470938897168406%" valign="top" fr-original-style="" style="min-width: 5px; box-sizing: border-box; user-select: text; border: 0px solid rgb(221, 221, 221);">&nbsp;</td><td width="95.52906110283159%" valign="top" fr-original-style="" style="min-width: 5px; box-sizing: border-box; user-select: text; border: 0px solid rgb(221, 221, 221);">Novice course &ndash; 3 DaysExperienced Worker Tests- 1 Day&nbsp;</td></tr></tbody></table><h1 fr-original-style="" style="box-sizing: border-box;">Certification</h1><table border="0" cellspacing="0" cellpadding="0" width="671" fr-original-style="" style="border: none; border-collapse: collapse; empty-cells: show; max-width: 100%; box-sizing: border-box;"><tbody fr-original-style="" style="box-sizing: border-box;"><tr fr-original-style="" style="box-sizing: border-box;"><td width="4.470938897168406%" valign="top" fr-original-style="" style="min-width: 5px; box-sizing: border-box; user-select: text; border: 0px solid rgb(221, 221, 221);">&nbsp;</td><td width="95.52906110283159%" valign="top" fr-original-style="" style="min-width: 5px; box-sizing: border-box; user-select: text; border: 0px solid rgb(221, 221, 221);">Traditional NPORS Card &ndash; Refresher training is advised every 3 years</td></tr></tbody></table>

Overview 
 	This course is aimed at candidates that require the knowledge and practical skills to ensure a safe system of work in accordance with the method statement. It will enable the candidate to carry out their duties while complying with the relevant legislation and standards, including LOLER 1998 and BS 7121.
Who Should Attend?
 	This course is designed for personnel who supervise the lift and follow lift plans for routine and non-routine lifts.
Requirements:
Experienced operators should have sufficient experience of cranes to meet the requirements specified in British standard 7121 Safe Use of Cranes. 
Good understanding of spoken and written English.
Agenda
 	 
Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as a crane / lift supervisorExplain the importance of locating and identifying different types of lifting equipment and lifting accessories. Explain their basic construction, uses, applications and functionsDemonstrate how to interpret and extract information on all relevant documentationExplain and demonstrate diverse types of communication methods used for lifting purposesExplain procedures for placing non-serviceable items out-of-serviceExplain the function and use of the RCIs and anti-collision systems and use the information providedExplain setting up, erection, levelling and dismantling requirements for diverse types of lifting equipment and liftsSet up exclusion zone explaining actions required for emergency actions and identify overhead hazardsIdentify potential hazards and unsafe lifting practices using different lifting scenariosExplain the importance of checking the security of various types of loads and lifting accessories, explain the procedures ensuring load balance and integritySupervise the movement of loads to different types of locations using different methods of communicationExplain all Environmental considerations and explain how factors such as the external area to the lift zone can affect the planning of the lifting operationCarry out all out-of-service and securing procedures
 
Assessment
 	Novice course – 3 Days
Experienced Worker Tests- 1 Day 
Certification
 	Traditional NPORS Card – Refresher training is advised every 3 years

NPORS

NPORS Crane / Lift Supervisor (N405)

Course Overview<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">The Level 2 NVQ Certificate in Plant Operations (Construction) -Sweeping, Cleaning, Clearing qualification has been developed for achievement in a real workplace environment which means you need to be employed to undertake this qualification. This qualification enables you, the learner, to demonstrate and recognise your skills, knowledge and understanding and to demonstrate your competence in a real workplace environment so you can work in Sweeping, Cleaning and Clearing within the construction industry. You will be assessed against a set of performance and knowledge statements which have been derived from National Occupational Standards for your occupational area. You will be assessed by an occupationally competent and qualified assessor whose job is to work with you and help you complete your qualification. This qualification supports the learner to attain enabling, fundamental and transferable practical skills with associated underpinning knowledge. The learner will learn key practical skills and knowledge in these mandatory units -Conforming to General Health, Safety and Welfare in the Workplace -Conforming to Productive Working Practices in the Workplace -Preparing and operating plant or machinery to sweep, clean or clear in the workplace</li><h3 style="color: rgb(0, 43, 81); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 43, 81);">Entry Requirements</h3><div style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">There are no formal entry requirements to take this qualification. This qualification can be undertaken without any previous training or qualifications in this subject area.</div></ul>

Course Overview
The Level 2 NVQ Certificate in Plant Operations (Construction) -Sweeping, Cleaning, Clearing qualification has been developed for achievement in a real workplace environment which means you need to be employed to undertake this qualification.

This qualification enables you, the learner, to demonstrate and recognise your skills, knowledge and understanding and to demonstrate your competence in a real workplace environment so you can work in Sweeping, Cleaning and Clearing within the construction industry.

You will be assessed against a set of performance and knowledge statements which have been derived from National Occupational Standards for your occupational area. You will be assessed by an occupationally competent and qualified assessor whose job is to work with you and help you complete your qualification.

This qualification supports the learner to attain enabling, fundamental and transferable practical skills with associated underpinning knowledge.

The learner will learn key practical skills and knowledge in these mandatory units
-Conforming to General Health, Safety and Welfare in the Workplace
-Conforming to Productive Working Practices in the Workplace
-Preparing and operating plant or machinery to sweep, clean or clear in the workplace
Entry Requirements
There are no formal entry requirements to take this qualification. This qualification can be undertaken without any previous training or qualifications in this subject area.

Level 2 NVQ Certificate in Plant Operations - Sweeping and Cleaning

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Overview</h2>This course will enable candidates to competently and safely carry out the role of a Trailer Mounted Concrete Pump Operator and achieve a formal qualification.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Course Content</h2><ul style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><li fr-original-style="" style="box-sizing: border-box;">Describe the nature of the sector of industry and their role and responsibilities as a plant operator</li><li fr-original-style="" style="box-sizing: border-box;">Name and explain the purpose of principle components, the basic construction, controls and terminology</li><li fr-original-style="" style="box-sizing: border-box;">Conform with manufacturer&rsquo;s requirements as per the operator&rsquo;s handbook, and the relevant regulations and legislation</li><li fr-original-style="" style="box-sizing: border-box;">Undertake all pre-use checks</li><li fr-original-style="" style="box-sizing: border-box;">Confirm the position and configure the plant machinery for pumping duties</li><li fr-original-style="" style="box-sizing: border-box;">Deploy the outriggers to specification (where applicable)</li><li fr-original-style="" style="box-sizing: border-box;">Arrange, anchor and secure all pipes and lines</li><li fr-original-style="" style="box-sizing: border-box;">Confirm a given mix is able to be pumped</li><li fr-original-style="" style="box-sizing: border-box;">Arrange and comply with communication procedures</li><li fr-original-style="" style="box-sizing: border-box;">Direct the loading/mixer vehicle to position</li><li fr-original-style="" style="box-sizing: border-box;">Explain action required for hazards, underground and overhead services</li><li fr-original-style="" style="box-sizing: border-box;">Pump and control materials accurately to the desired pour location</li><li fr-original-style="" style="box-sizing: border-box;">Explain how blockages occur and solution methods</li><li fr-original-style="" style="box-sizing: border-box;">Maintain safe working situations</li><li fr-original-style="" style="box-sizing: border-box;">Carry out shut down and securing procedures</li><li fr-original-style="" style="box-sizing: border-box;">Complete end-of-use cleaning procedures</li></ul><h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Entry Requirements</h2>Candidates must have achieved the relevant CITB Health, Safety &amp; Environment (HS&amp;E) touch-screen-test within 2 years.Good understanding of spoken and written English.

Overview
This course will enable candidates to competently and safely carry out the role of a Trailer Mounted Concrete Pump Operator and achieve a formal qualification.
Course Content
Describe the nature of the sector of industry and their role and responsibilities as a plant operator
Name and explain the purpose of principle components, the basic construction, controls and terminology
Conform with manufacturer’s requirements as per the operator’s handbook, and the relevant regulations and legislation
Undertake all pre-use checks
Confirm the position and configure the plant machinery for pumping duties
Deploy the outriggers to specification (where applicable)
Arrange, anchor and secure all pipes and lines
Confirm a given mix is able to be pumped
Arrange and comply with communication procedures
Direct the loading/mixer vehicle to position
Explain action required for hazards, underground and overhead services
Pump and control materials accurately to the desired pour location
Explain how blockages occur and solution methods
Maintain safe working situations
Carry out shut down and securing procedures
Complete end-of-use cleaning procedures
Entry Requirements
Candidates must have achieved the relevant CITB Health, Safety & Environment (HS&E) touch-screen-test within 2 years.
Good understanding of spoken and written English.

CPCS A44 Concrete Pump Trailer Mounted

The Level 2 NVQ Diploma in Plant Operations (Construction) -Laying and Distributing Plant qualification has been developed for achievement in a real workplace environment which means you need to be employed to undertake this qualification.&nbsp;This qualification enables you, the learner, to demonstrate and recognise your skills, knowledge and understanding and to demonstrate your competence in a real workplace environment so you can work in Laying and Distributing Plant within the construction industry.&nbsp;You will be assessed against a set of performance and knowledge statements which have been derived from National Occupational Standards for your occupational area. You will be assessed by an occupationally competent and qualified assessor whose job is to work with you and help you complete your qualification.&nbsp;This qualification supports the learner to attain enabling, fundamental and transferable practical skills with associated underpinning knowledge.&nbsp;The learner will learn key practical skills and knowledge in these mandatory units:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">&nbsp;-Conforming to General Health, Safety and Welfare in the Workplace</li><li fr-original-style="" style="box-sizing: border-box;">&nbsp;-Conforming to Productive Working Practices in the Workplace&nbsp;</li></ul>The learner will also learn key practical skills and knowledge in one of the following optional units:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">&nbsp;-Preparing and operating crawler tractor dozers to carry out dozer operations in the workplace</li><li fr-original-style="" style="box-sizing: border-box;">&nbsp;-Preparing and operating soil stabilisers to lay and distribute materials in the workplace</li></ul><h3 style="color: rgb(0, 43, 81); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 43, 81);">Entry Requirements</h3><div style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">There are no formal entry requirements to take this qualification. This qualification can be undertaken without any previous training or qualifications in this subject area.</div>

The Level 2 NVQ Diploma in Plant Operations (Construction) -Laying and Distributing Plant qualification has been developed for achievement in a real workplace environment which means you need to be employed to undertake this qualification.
 This qualification enables you, the learner, to demonstrate and recognise your skills, knowledge and understanding and to demonstrate your competence in a real workplace environment so you can work in Laying and Distributing Plant within the construction industry. 
You will be assessed against a set of performance and knowledge statements which have been derived from National Occupational Standards for your occupational area. You will be assessed by an occupationally competent and qualified assessor whose job is to work with you and help you complete your qualification. 
This qualification supports the learner to attain enabling, fundamental and transferable practical skills with associated underpinning knowledge. 
The learner will learn key practical skills and knowledge in these mandatory units:
-Conforming to General Health, Safety and Welfare in the Workplace
-Conforming to Productive Working Practices in the Workplace
The learner will also learn key practical skills and knowledge in one of the following optional units:
-Preparing and operating crawler tractor dozers to carry out dozer operations in the workplace
-Preparing and operating soil stabilisers to lay and distribute materials in the workplace
Entry Requirements
There are no formal entry requirements to take this qualification. This qualification can be undertaken without any previous training or qualifications in this subject area.

Level 2 NVQ Certificate in Plant Operations - Laying and Distributing

<div style="color: rgb(98, 98, 98); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(98, 98, 98);"><div style="color: rgb(98, 98, 98); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(98, 98, 98);">This is an Initial course and is suitable for heating engineers looking to expand their scope into Solid Fuel. Our renewal course is available through this link:&nbsp;<a href="https://www.citytraining.com/w/courses/20-solid-fuel-renewal" target="_blank" style="color: rgb(0, 0, 140); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(0, 0, 140);">https://www.citytraining.com/w/courses/20-solid-fuel-renewal</a>Dry - 2 Days Our courses are accredited by&nbsp;<a href="https://www.oftec.org/technicians/areas-of-registration/solid-fuel-registration" target="_blank" rel="noopener noreferrer nofollow" style="color: rgb(0, 0, 140); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(0, 0, 140);">OFTEC</a>&nbsp;and certified by&nbsp;<a href="http://www.cert-ain.com/solid-fuel.html" target="_blank" rel="noopener noreferrer nofollow" style="color: rgb(0, 0, 140); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(0, 0, 140);">Cert-ain</a>, but this does not stop you from renewing or achieving accreditation from HETAS and similar bodies, saving you money on training costs too.What&#39;s included?<ul fr-original-style="" style="box-sizing: border-box;"><li style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);">Dry<ul style="color: initial; box-sizing: border-box;" fr-original-style="color: initial;"><li style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);">OFT15-108(D) - Installation, commissioning, and servicing of solid fuel burning appliances (dry space heating).</li><li style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);">OFT18-108(S) - Service, maintenance, repair, or commissioning of solid fuel burning appliances.</li></ul></li></ul></div><div style="color: rgb(98, 98, 98); box-sizing: border-box;" fr-original-style=" color: rgb(98, 98, 98);"><h3 style="color: rgb(0, 164, 255); box-sizing: border-box;" fr-original-style=" color: rgb(0, 164, 255);">Prerequisites</h3>Category 1 (Renewal Only)For those looking to re-new their qualification, please visit our Solid Fuel Renewal page!Applicants in this category are regarded as experienced Solid Fuel technicians holding one of the following - they will need to provide an original certificate as evidence to the Assessment Centre prior to taking OFTEC assessments:&nbsp;&nbsp;<ul fr-original-style="" style="box-sizing: border-box;"><li style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);">OFTEC &nbsp;&nbsp; &nbsp;&nbsp;<ul style="color: initial; box-sizing: border-box;" fr-original-style="color: initial;"><li style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);">OFT15-108D (category 1 status for OFT15-108D and OFT18-108S)&nbsp;</li><li style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);">OFT15-108W (category 1 status for OFT15-108W, OFT15-108D and OFT18-108S)&nbsp;</li><li style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);">OFT18-108S (category 1 status for OFT18-108S only)&nbsp;</li></ul></li><li style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);">HETAS&nbsp;<ul style="color: initial; box-sizing: border-box;" fr-original-style="color: initial;"><li style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);">H003 AND H006 (category 1 status for OFT15-108D and OFT18-108S)&nbsp;</li><li style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);">H004 AND H006 (category 1 status for OFT15-108W, OFT15-108D and OFT18-108S)</li><li style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);">H005 (category 1 status for OFT15-108W, OFT15-108D and OFT18-108S)&nbsp;</li><li style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);">H009 (category 1 status for OFT18-108S only)&nbsp;</li></ul></li><li style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);">BPEC &nbsp; &nbsp; &nbsp; &nbsp;<ul style="color: initial; box-sizing: border-box;" fr-original-style="color: initial;"><li style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);">Solid Fuel Installer (category 1 status for OFT15-108W, OFT15-108D and OFT18-108S)</li></ul></li><li style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);">CITY &amp; GUILDS &nbsp; &nbsp;<ul style="color: initial; box-sizing: border-box;" fr-original-style="color: initial;"><li style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);">Level 3 NVQ Diploma in Domestic Plumbing and Heating (6189) - must include Solid Fuel pathway (category 1 status for OFT15-108W, OFT15-108D and OFT18-108S)</li><li style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);">Level 3 Diploma in Plumbing and Domestic Heating (9189-03) - must include Solid Fuel pathway (category 1 status for OFT15-108W, OFT15-108D and OFT18-108S)</li></ul></li></ul>&nbsp;Category 2 (Heating Engineer - Other Fuel) - INITIAL&nbsp;Applicants in this category are regarded as holding a nationally recognised qualification in a trade associated with Solid Fuel work; candidates must provide relevant qualifications to support entry:<ul fr-original-style="" style="box-sizing: border-box;"><li style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);">Dry<ul style="color: initial; box-sizing: border-box;" fr-original-style="color: initial;"><li style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);">OFTEC technician with scope of work categories 101,102 or 105E<ul style="color: initial; box-sizing: border-box;" fr-original-style="color: initial;"><li style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);">or - Registered Gas Safe or RGII operative</li><li style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);">or - Registered member of GOMCS, APICS, NACS, NIACS, CSAI, ICS, CSA or NACE</li><li style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);">or - evidence of formal qualifications: City &amp; Guilds 6129/6035 and 6089, or QCF 6189;</li><li style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);">or - (United Kingdom) N/SVQ Level 2/3 in plumbing or equivalent earlier certification that provides evidence of competence</li><li style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);">or - (Republic of Ireland) FETAC Level 5 in plumbing</li><li style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);">or - HETAS H003 Dry Appliance Installer course</li><li style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);">or - BPEC Solid Fuel Installer or Solid Biomass course</li><li style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);">or - APHC Installation of Solid Fuel Appliances and Heating Systems Fed by Solid Fuel in Domestic Appliances course</li><li style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);">or have relevant qualifications, skills and experience gained from working in a related trade such as Plumbing / Heating / Ventilation / Refrigeration / Air-Conditioning / Gas Fitting or servicing. Applicants must provide evidence of this related experience to the Assessment Centre. The evidence must consist of, as a minimum, the following:<ul style="color: initial; box-sizing: border-box;" fr-original-style="color: initial;"><li style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);">Name and address of the business(s) providing the related experience.</li><li style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);">The types of related work undertaken (minimum 4/5 jobs).</li></ul></li></ul></li></ul></li></ul>All Category 2 candidates must also undertake training at an OFTEC approved training centre.&nbsp;The training must consist of training utilising the current OFTEC Technical Book. The possession of the OFTEC Technical Book prior to training and subsequent assessment is mandatory.Category 3 (New to Industry) - INITIALApplicants in this category are regarded as new to the Solid Fuel industry, and do not hold any national qualifications in a related field nor have any related work experience. Application conditions for this category require that the Category 3 applicant must obtain experience with a business which is willing to provide an auditable extended Solid Fuel training programme incorporating both On and Off the Job components with organisational support prior to the applicant taking OFTEC training and assessment. Evidence of the contents of the programme detailing the Off the Job training and On the Job experience must be presented to the Assessment Centre as above. 4 to 5 jobs are required as a minimum for your portfolio.</div></div>

This is an Initial course and is suitable for heating engineers looking to expand their scope into Solid Fuel. Our renewal course is available through this link: 
https://www.citytraining.com/w/courses/20-solid-fuel-renewal
Dry - 2 Days

Our courses are accredited by OFTEC and certified by Cert-ain, but this does not stop you from renewing or achieving accreditation from HETAS and similar bodies, saving you money on training costs too.
What's included?
DryOFT15-108(D) - Installation, commissioning, and servicing of solid fuel burning appliances (dry space heating).OFT18-108(S) - Service, maintenance, repair, or commissioning of solid fuel burning appliances.
Prerequisites
Category 1 (Renewal Only)
For those looking to re-new their qualification, please visit our Solid Fuel Renewal page!
Applicants in this category are regarded as experienced Solid Fuel technicians holding one of the following - they will need to provide an original certificate as evidence to the Assessment Centre prior to taking OFTEC assessments: 
 
OFTEC OFT15-108D (category 1 status for OFT15-108D and OFT18-108S) OFT15-108W (category 1 status for OFT15-108W, OFT15-108D and OFT18-108S) OFT18-108S (category 1 status for OFT18-108S only)
HETAS H003 AND H006 (category 1 status for OFT15-108D and OFT18-108S) H004 AND H006 (category 1 status for OFT15-108W, OFT15-108D and OFT18-108S)H005 (category 1 status for OFT15-108W, OFT15-108D and OFT18-108S) H009 (category 1 status for OFT18-108S only)
BPEC Solid Fuel Installer (category 1 status for OFT15-108W, OFT15-108D and OFT18-108S)
CITY & GUILDS Level 3 NVQ Diploma in Domestic Plumbing and Heating (6189) - must include Solid Fuel pathway (category 1 status for OFT15-108W, OFT15-108D and OFT18-108S)Level 3 Diploma in Plumbing and Domestic Heating (9189-03) - must include Solid Fuel pathway (category 1 status for OFT15-108W, OFT15-108D and OFT18-108S)
Category 2 (Heating Engineer - Other Fuel) - INITIAL Applicants in this category are regarded as holding a nationally recognised qualification in a trade associated with Solid Fuel work; candidates must provide relevant qualifications to support entry:
DryOFTEC technician with scope of work categories 101,102 or 105Eor - Registered Gas Safe or RGII operativeor - Registered member of GOMCS, APICS, NACS, NIACS, CSAI, ICS, CSA or NACEor - evidence of formal qualifications: City & Guilds 6129/6035 and 6089, or QCF 6189;or - (United Kingdom) N/SVQ Level 2/3 in plumbing or equivalent earlier certification that provides evidence of competenceor - (Republic of Ireland) FETAC Level 5 in plumbingor - HETAS H003 Dry Appliance Installer courseor - BPEC Solid Fuel Installer or Solid Biomass courseor - APHC Installation of Solid Fuel Appliances and Heating Systems Fed by Solid Fuel in Domestic Appliances courseor have relevant qualifications, skills and experience gained from working in a related trade such as Plumbing / Heating / Ventilation / Refrigeration / Air-Conditioning / Gas Fitting or servicing. Applicants must provide evidence of this related experience to the Assessment Centre. The evidence must consist of, as a minimum, the following:Name and address of the business(s) providing the related experience.The types of related work undertaken (minimum 4/5 jobs).
All Category 2 candidates must also undertake training at an OFTEC approved training centre. The training must consist of training utilising the current OFTEC Technical Book. The possession of the OFTEC Technical Book prior to training and subsequent assessment is mandatory.
Category 3 (New to Industry) - INITIAL
Applicants in this category are regarded as new to the Solid Fuel industry, and do not hold any national qualifications in a related field nor have any related work experience. Application conditions for this category require that the Category 3 applicant must obtain experience with a business which is willing to provide an auditable extended Solid Fuel training programme incorporating both On and Off the Job components with organisational support prior to the applicant taking OFTEC training and assessment. Evidence of the contents of the programme detailing the Off the Job training and On the Job experience must be presented to the Assessment Centre as above. 4 to 5 jobs are required as a minimum for your portfolio.

Compliance & Safety

Renew your solid fuel certificate whether you're HETA, BPEC, OFTEC, or C&G!
Become a solid fuel installer & servicer today!

Solid Fuel (Initial)

Two Days | Incl. Cert Fee & Book | OFT15-108(D) & OFT18-108(S)

Dry Initial Bundle

Course Overview&nbsp;This Level 2 NVQ Diploma in Directional Drilling Operations -Fluid Operative qualification has been developed for achievement in a real workplace environment which means you need to be employed to undertake this qualification. This qualification enables you, the learner, to demonstrate and recognise your skills, knowledge and understanding and to demonstrate your competence in a real workplace environment so you can work in Fluid Operating within the construction industry. You will be assessed against a set of performance and knowledge statements which have been derived from National Occupational Standards for your occupational area. You will be assessed by an occupationally competent and qualified assessor whose job is to work with you and help you complete your qualification. This qualification supports the learner to attain enabling, fundamental and transferable practical skills with associated underpinning knowledge. The learner will learn key practical skills and knowledge in these mandatory units: -Conforming to General Health, Safety and Welfare in the Workplace -Conforming to Productive Working Practices in the Workplace -Contributing to the specified drilling programme in the workplace -Operating drilling rigs to construct and form in the workplace -Carrying out mud, slurry or fluid plant operations in the workplace<h3 style="color: rgb(0, 43, 81); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 43, 81);">Entry Requirements</h3><div style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">There are no formal entry requirements to take this qualification. This qualification can be undertaken without any previous training or qualifications in this subject area.</div>

Course Overview 
This Level 2 NVQ Diploma in Directional Drilling Operations -Fluid Operative qualification has been developed for achievement in a real workplace environment which means you need to be employed to undertake this qualification.

This qualification enables you, the learner, to demonstrate and recognise your skills, knowledge and understanding and to demonstrate your competence in a real workplace environment so you can work in Fluid Operating within the construction industry.

You will be assessed against a set of performance and knowledge statements which have been derived from National Occupational Standards for your occupational area. You will be assessed by an occupationally competent and qualified assessor whose job is to work with you and help you complete your qualification.

This qualification supports the learner to attain enabling, fundamental and transferable practical skills with associated underpinning knowledge.

The learner will learn key practical skills and knowledge in these mandatory units:
-Conforming to General Health, Safety and Welfare in the Workplace
-Conforming to Productive Working Practices in the Workplace
-Contributing to the specified drilling programme in the workplace
-Operating drilling rigs to construct and form in the workplace
-Carrying out mud, slurry or fluid plant operations in the workplace
Entry Requirements
There are no formal entry requirements to take this qualification. This qualification can be undertaken without any previous training or qualifications in this subject area.

Level 2 NVQ Diploma in Drilling Operations - Directional Drilling - Drill Fluid Operator 

Course OverviewThe Level 2 NVQ Certificate in Plant Operations &ndash; Movement Guide qualification has been developed for achievement in a real workplace environment which means you need to be employed to undertake this qualification. This qualification enables you, the learner, to demonstrate and recognise your skills, knowledge and understanding and to demonstrate your competence in a real workplace environment so you can work in Movement Guide within the construction industry. You will be assessed against a set of performance and knowledge statements which have been derived from National Occupational Standards for your occupational area. You will be assessed by an occupationally competent and qualified assessor whose job is to work with you and help you complete your qualification. This qualification supports the learner to attain enabling, fundamental and transferable practical skills with associated underpinning knowledge. The learner will learn key practical skills and knowledge in these mandatory units: -Preparing to and directing and guiding the movement of vehicles, plant or machinery in the workplace -Conforming to General Health, Safety and Welfare in the Workplace -Conforming to Productive Working Practices in the Workplace<h3 style="color: rgb(0, 43, 81); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 43, 81);">Entry Requirements</h3><div style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">There are no formal entry requirements to take this qualification. This qualification can be undertaken without any previous training or qualifications in this subject area.</div>

Course Overview
The Level 2 NVQ Certificate in Plant Operations – Movement Guide qualification has been developed for achievement in a real workplace environment which means you need to be employed to undertake this qualification.

This qualification enables you, the learner, to demonstrate and recognise your skills, knowledge and understanding and to demonstrate your competence in a real workplace environment so you can work in Movement Guide within the construction industry.

You will be assessed against a set of performance and knowledge statements which have been derived from National Occupational Standards for your occupational area. You will be assessed by an occupationally competent and qualified assessor whose job is to work with you and help you complete your qualification.

This qualification supports the learner to attain enabling, fundamental and transferable practical skills with associated underpinning knowledge.

The learner will learn key practical skills and knowledge in these mandatory units:

-Preparing to and directing and guiding the movement of vehicles, plant or machinery in the workplace
-Conforming to General Health, Safety and Welfare in the Workplace
-Conforming to Productive Working Practices in the Workplace
Entry Requirements
There are no formal entry requirements to take this qualification. This qualification can be undertaken without any previous training or qualifications in this subject area.




Level 2 NVQ Certificate in Plant Operations - Movement Guide

ObjectivesBy the end of the course, delegates should be able to:&nbsp;<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Demonstrate a basic understanding of the industry and their roles and responsibilities&nbsp;</li><li fr-original-style="" style="box-sizing: border-box;"> Demonstrate an understanding of the relevant regulations, standards and legislation</li><li fr-original-style="" style="box-sizing: border-box;">&nbsp; Identify services on plans for water, gas, electricity and telecommunications&nbsp;</li><li fr-original-style="" style="box-sizing: border-box;">Survey a site for visual indications of services being present&nbsp;</li><li fr-original-style="" style="box-sizing: border-box;">Point out on the ground where services are, in relation to the plans</li><li fr-original-style="" style="box-sizing: border-box;"> Identify damage to samples of different types of underground apparatus&nbsp;</li><li fr-original-style="" style="box-sizing: border-box;">Demonstrate an understanding of the risks and implications of damaged underground apparatus  Conduct all pre-operation checks&nbsp;</li><li fr-original-style="" style="box-sizing: border-box;"> Conduct all necessary safety checks at the work area</li><li fr-original-style="" style="box-sizing: border-box;">&nbsp;Correctly use the equipment to scan an area for underground apparatus and record the findings  Mark the site clearly to show the location of underground apparatus</li><li fr-original-style="" style="box-sizing: border-box;">&nbsp; Correctly clean equipment, remove the battery pack and stow away.</li></ul><div fr-original-style="" style="box-sizing: border-box;"> </div>

Objectives
By the end of the course, delegates should be able to: 
Demonstrate a basic understanding of the industry and their roles and responsibilities
Demonstrate an understanding of the relevant regulations, standards and legislation
Identify services on plans for water, gas, electricity and telecommunications
Survey a site for visual indications of services being present
Point out on the ground where services are, in relation to the plans
Identify damage to samples of different types of underground apparatus
Demonstrate an understanding of the risks and implications of damaged underground apparatus  Conduct all pre-operation checks
Conduct all necessary safety checks at the work area
Correctly use the equipment to scan an area for underground apparatus and record the findings  Mark the site clearly to show the location of underground apparatus
Correctly clean equipment, remove the battery pack and stow away.

NPORS Cable Avoidance Tools (N304)

Welcome to the world of Organisation and Relationship Systems Coaching (ORSC&trade;) series, where we offer advanced training for professionals and coaches like yourself! This unique programme focuses on systems and team coaching, designed to enhance your skills and take your coaching career to new heights.What makes our ORSC&trade; series truly exceptional is that it&#39;s the first coach training programme with a dedicated focus on relationship systems that are also accredited by the International Coach Federation (ICF)!&nbsp;Your ORSC JourneyYou&rsquo;ll start the 5-Module ORSC&trade; journey b either completing:<ul fr-original-style="" style="box-sizing: border-box;"><li dir="ltr" style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color:#000000;">Fundamentals of ORSC&trade; or&nbsp;</li><li dir="ltr" style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color:#000000;">ORS@Work (Organisation &amp; Relationship Systems at Work)</li></ul> All ORSC journeys begin with either Fundamentals or ORS@Work. Both of our introductory courses are based on the same set of skills and principles. Fundamentals is geared more toward independent coaches /consultants or those wanting a new career; ORS@Work meanwhile has been designed specifically for those working internally to an organisation.Following the introductory course, be it Fundamentals of ORSC or ORS@Work,&nbsp;you will continue with the remaining 4-module ORSC Series. These modules are taken sequentially as each builds on the foundation of the preceding course.&nbsp;We&#39;re thrilled to be a part of your coaching journey and look forward to accompanying you to reach your coaching and leadership goals!&nbsp; Credentials&nbsp;The ORSC series is accredited by the International Coaching Federation. This means you can work towards obtaining an ICF Credential at the Associate Certified Coach (ACC), Professional Certified Coach (PCC), or Master Certified Coach (MCC) level.Upon successfully completing all five courses in our ORSC&trade; training series, starting from Fundamentals, and progressing through Systems Integration, you&#39;ll earn 84 Continuing Coach Education (CCE) units. For those who want to continue towards mastery of ORSC skills and tools, you will join the 8-month Certification Programme and gain the ORSCC credential and an additional 96.5 CCE units. ORSC Community&nbsp;The UK ORSC Community has been running for over 15 years. The community is run by ORSC practitioners for ORSC practitioners. Gathering monthly to practise and hone in ORSC skills.By participating in the series, you are invited to join this engaging professional network of like-minded individuals, each bringing a diverse range of skills and experiences, enriching your learning experience. You&#39;ll have the chance to practise, reflect, learn, and connect with this vibrant community. Additionally, you&#39;ll have the opportunity to co-lead a community event and gain insights on co-facilitation from a senior ORSC Coach and industry leaders. Booking OptionsAlongside the date for the course, you&#39;ll be sent optional dates for your Mentoring calls. These are additional learning opportunities we provide for free on top of your training dates. These are optional and not compulsory, but we do recommend you attend if you are able.&nbsp;The Mentoring calls are 90-minute sessions to reconnect with your learning system and your leaders to embed everything you&#39;ve learned in the course. It&#39;s a space to share your experiences of using the tools and skills and to ask the leaders for input on any experiences you&#39;ve had whilst coaching relationships. It&#39;s a fantastic opportunity to deepen your experience of the tools and skills you&#39;ve learnt and fine-tune your practice.&nbsp;

Welcome to the world of Organisation and Relationship Systems Coaching (ORSC™) series, where we offer advanced training for professionals and coaches like yourself! This unique programme focuses on systems and team coaching, designed to enhance your skills and take your coaching career to new heights.
What makes our ORSC™ series truly exceptional is that it's the first coach training programme with a dedicated focus on relationship systems that are also accredited by the International Coach Federation (ICF)! 
Your ORSC Journey
You’ll start the 5-Module ORSC™ journey b either completing:
Fundamentals of ORSC™ or
ORS@Work (Organisation & Relationship Systems at Work)
All ORSC journeys begin with either Fundamentals or ORS@Work. Both of our introductory courses are based on the same set of skills and principles. Fundamentals is geared more toward independent coaches /consultants or those wanting a new career; ORS@Work meanwhile has been designed specifically for those working internally to an organisation.
Following the introductory course, be it Fundamentals of ORSC or ORS@Work, you will continue with the remaining 4-module ORSC Series. These modules are taken sequentially as each builds on the foundation of the preceding course. 
We're thrilled to be a part of your coaching journey and look forward to accompanying you to reach your coaching and leadership goals! 
Credentials 
The ORSC series is accredited by the International Coaching Federation. This means you can work towards obtaining an ICF Credential at the Associate Certified Coach (ACC), Professional Certified Coach (PCC), or Master Certified Coach (MCC) level.
Upon successfully completing all five courses in our ORSC™ training series, starting from Fundamentals, and progressing through Systems Integration, you'll earn 84 Continuing Coach Education (CCE) units. For those who want to continue towards mastery of ORSC skills and tools, you will join the 8-month Certification Programme and gain the ORSCC credential and an additional 96.5 CCE units.


ORSC Community 
The UK ORSC Community has been running for over 15 years. The community is run by ORSC practitioners for ORSC practitioners. Gathering monthly to practise and hone in ORSC skills.
By participating in the series, you are invited to join this engaging professional network of like-minded individuals, each bringing a diverse range of skills and experiences, enriching your learning experience. You'll have the chance to practise, reflect, learn, and connect with this vibrant community. Additionally, you'll have the opportunity to co-lead a community event and gain insights on co-facilitation from a senior ORSC Coach and industry leaders.


Booking Options
Alongside the date for the course, you'll be sent optional dates for your Mentoring calls. These are additional learning opportunities we provide for free on top of your training dates. These are optional and not compulsory, but we do recommend you attend if you are able. 
The Mentoring calls are 90-minute sessions to reconnect with your learning system and your leaders to embed everything you've learned in the course. It's a space to share your experiences of using the tools and skills and to ask the leaders for input on any experiences you've had whilst coaching relationships. It's a fantastic opportunity to deepen your experience of the tools and skills you've learnt and fine-tune your practice. 

CRR UK

Business Relationship Management (BRM)

CRRUK equips professionals with the concepts, skills and tools to build conscious, intentional relationships, and to coach relationship systems of any size.

Spring Series 2025 - Organisation & Relationship Systems Coaching Training

Chelmsford

Stratford

Our CITB Online - Site Supervisors’ Safety Training Scheme (SSSTS) Refresher course is designed to give attendees a broad reminder of their responsibilities for health and safety on construction sites. Approved and endorsed by the United Kingdom Contractors Group, the SSSTS refresher course is a must for anyone who occupies a supervisory role on UKCG sites and wants to brush up on their knowledge of their legal responsibilities and the latest construction industry regulations.
The SSSTS Refresher course has been created to provide existing supervisors, or those who are just entering into a supervisory role, with in-depth knowledge of health and safety legislation and procedures. If a candidate completed a full SSSTS training course up to 5 years ago, they will be required to attend a refresher programme.
Prerequisites
SSSTS certificates are of course valid for up to 5 years, but due to the ever-changing nature of the industry, it is recommended that staff stay up to date by enrolling on a refresher course long before the qualification expires.
Instructions
Please note all Site Supervisor Training courses with the venue “Remote Learning” will be delivered by a tutor over a video call.
This training will be delivered and assessed in English language; therefore, a good standard is required to complete the course.
Further attendee information will be sent in a separate email, please check your inbox.

SMC Safety Solutions

Site Supervisor Training Scheme (SSSTS) Refresher

Bournemouth

Our Virtual (via Zoom) course provide the same high-quality tuition as our classroom-based sessions. Quarterly meetings will take place at the Academy



Dental Nursing Diploma with National Examining Board for Dental Nurses (NEBDN) is an internationally recognised qualification that will allow you to work as a Dental Nurse in hospitals, NHS and private dental practices.

Successful completion of Dental Nursing Diploma course will enable you to register as a Dental Care Professional with the General Dental Council (GDC) and practice as a qualified Dental Nurse.


Discover the exciting world of dental nursing and be a part of a growing field that offers endless opportunities for growth and development.
How will you learn?
In addition to our traditional class-based tuition, we also offer Virtual (via Zoom) Learning courses to cater to different learning preferences. Our Virtual Learning courses provide the same high-quality tuition as our classroom-based sessions. To participate, you will need a laptop, PC, smart phone or tablet with a built-in or external camera and microphone. From the comfort of your own home, you will have the opportunity to communicate with your tutor and classmates through video chat, using your phone or computer camera. This allows for seamless interaction, discussions, and collaborative learning.

Quarterly meetings at the Academy
To ensure a well-rounded learning experience, you will be required to attend face-to-face lessons at the Academy on a quarterly basis, which means every three months. These sessions serve several important purposes:

Practical Units: Some aspects of the course require hands-on practical training. The face-to-face lessons will cover these practical units, allowing you to gain valuable experience and apply the knowledge you have acquired during the virtual learning sessions.

Tests and Mock Exams: These assessments are important for evaluating your progress, identifying areas for improvement, and preparing you for the final exams. The Academy will provide a controlled and supervised environment to ensure the integrity and fairness of these assessments.
Attending quarterly face-to-face lessons provides a balanced approach to your learning journey. It combines the convenience and flexibility of virtual learning with the benefits of in-person interactions, practical training, and assessments. By participating in these sessions, you will have the opportunity to reinforce your knowledge, receive personalized feedback, and build a stronger connection with your tutor and classmates.
The Academy is dedicated to supporting your growth and success in dental nursing field, and the face-to-face lessons are an integral part of that commitment.



Being a Dental Nurse can be an exciting and fulfilling career that allows you to make a positive impact on people’s lives while enjoying a variety of work and opportunities to learn and grow. You’ll get to work with an amazing dental team and get to know patients, helping them to feel at ease and comfortable during their visit. You’ll be the one behind the scene making sure everything runs smoothly, and you’ll be the one that patients will turn to for assistance. You’ll also get to be a part of the latest advancements in dental technology and treatment. And on top of all that, you get to have a flexible schedule and a good earning potential, with the potential to advance in your career. All in all, being a dental nurse is one of the most exciting and fulfilling career that you can have, and you’ll get to leave work every day knowing you’ve made a real difference in the lives of others.


The course is delivered by Team of Dental Professionals who are examiners, dentists and experienced Dental tutors with years of experience in teaching Dentistry.
Dental Nurses are involved in a wide range of procedures, from routine check-ups to complex surgeries, which can make the job interesting and varied.

Patient-centered care: Dental Nurses have a direct impact on the patient’s experience and can make a positive difference in people’s lives by providing them with quality care.

Professional development: Dental Nurses have the opportunity to continue their education and expand their skills, leading to advancement and new opportunities in the field.
No previous experience required – we will teach you from A to Z.
Do you need a job?
Yes, you will have 3 months’ time from the start of your course to find a placement.
The Academy provides a list of Private and NHS Dental Surgeries, who are regularly contacting us when looking for more Trainee Dental Nurses, so you can contact them directly as a registered student at the Academy. This is a paid job, unless you would like to work voluntary for personal reasons. We also provide a reference letter to the employee in case you need it.
The course is ideal for you if:
You are looking for a qualification that leads to employment
You intend to participate within dentistry and make a positive contribution to the dental health
You wish to learn how to maintain high standards of hygiene, cleanliness, health & safety
You enjoy interacting with multidisciplinary team and different people


The curriculum is based on the GDC (General Dental Council) registration requirements for dental nurses. It sets out the knowledge, skills and behavioural requirements that should be developed and demonstrated. These are set out in terms of professional competencies, with the assessment method clearly outlined (e.g. how the skills and knowledge will be assessed in the final examinations – via written questions such as multiple choice (MCQ) or extended matching questions (EMQ) or via Objective Structured Clinical Examinations – OSCEs). We are proud to announce that our Dental Nursing students has the highest examination pass rate in OSCE examinations!
Free services– workshops, mock exams, eRoE marking and internal moderation.


Earn while you learn could be another benefit for doing this course. We provide a list of Private Surgeries who have been working with us for the last 14 years and looking to recruit more Trainee Dental Nurses.
Working together – At our Dental Department, we prioritise working together with our learners every step of the way. We firmly believe in providing unwavering support, equipping you with the necessary tools, skills, and assistance to ensure your success. We take immense pride in the achievements of our students, with a long list of graduates boasting remarkable success stories. Our commitment to your success serves as the foundation for our own accomplishments
What Can You Expect to Earn as a Dental Nurse? Compared to other caring professions, Dental Nursing is well paid and offers plenty of opportunity for continued training and development. This is great for those looking on a the long-term plan for their career and those who wish to work their way up the ladder through continued learning, experience & hard work. Trainee Dental Nurse salary for standard working week will be around £23,000 per annum. Average wage for a qualified Dental Nurses between £40,417 to £42,350 p.a.
When are the exams?
There are two exams:
1. Multiple choice theory exam. November and March.
2. Practical exam. January and June. 
Record of Experience (eROE)
To be eligible to sit your first exam, you have to complete your electronic Record of Experience (eROE). The eROE has to be submitted to your tutor by 31st Jan for March exam, and 31st August for November exam. 
London Waterloo Academy supports Mouth Cancer Research Foundation and encouraging learners to raise the awareness and participate in annual 10k walk.



Study mode – virtual (via Zoom) live stream lessons combined with a quarterly meetings Saturday/Sunday at the Academy
Duration – 1 year (part time)
Virtual (via Zoom) classes – once a week
Quarterly meetings at the Academy – date are discussed with the group in advance
Next Intake/start dates (please choose one for your course to start):
21 September 2024, Saturday classes from 9am to 11am
Registration fee – £300 (includes: administration, workshops, mock exams, RoE marking, internal moderation of RoE)
Tuition Fees – £1,400 (we offer payment plan, and accept instalments)
Exam fee – £510 will be charged at the point of candidate registration with NEBDN
One day introduction course – for those who are considering/not sure whether to step up into the Dental Industry £50.00
Call us +44 (0) 7484 014980 or email to info@waterlooacademy.co.uk or Facebook – London Waterloo Academy
Office location: The Foundry, 156 Blackfriars Rd, London SE1 8EN (Southwark Station (2-3 min walk) and Waterloo/Blackfriars Station (10 min walk))

London Waterloo Academy

Dental Nurse

Dental Assistant

VIRTUAL DENTAL NURSING DIPLOMA

Registration Fee

Tuition Fee

Exam Fee

One Day Introduction Course

This two-day course is a must for anyone who is considering or already working in a role with supervisory responsibilities. This course provides an understanding of health, safety, welfare, and environmental issues. It highlights legal responsibilities and the need to promote health and safety to supervise effectively.
It is endorsed by Build UK as the standard training for all supervisors working on Build UK sites.
Aims
To give a clear understanding of health, safety, welfare, and environmental legislation that affects your supervisory role. To help you fulfil your responsibilities regarding health, safety, welfare, and the environment. To help you implement new guidance and industry best practice affected by changes.
Course Content
• Health and safety law and how it will apply to supervisors.
• Your supervisory responsibilities in controlling site safety.
• Risk assessments and the need for method statements.
• Effective site inductions, toolbox talks and method statement briefings.
• Monitoring site activities effectively.
• Timely intervention when bad practice is identified.
Prerequisites
This course is for you if you are considering, or already have, supervisory responsibilities.
Assessment
At the end of this course, all delegates will have a clear understanding of controlling health and safety on site from a supervisor’s role.
Certificate
This certification for this course is valid for 5 years and is endorsed by Build UK as a standard training for all supervisors.
To remain certified in this area, you will need to take a refresher course before the expiry date on your certificate, otherwise the full course will need to be retaken.
Instructions
Please note all Site Supervisor Training courses with the venue “Remote Learning” will be delivered by a tutor over a video call.
This training will be delivered and assessed in English language; therefore, a good standard is required to complete the course.
Further attendee information will be sent in a separate email, please check your inbox

Site Supervisor Training Scheme (SSSTS) - 2 Day Course

Applied Strategic Healthcare Leadership Course
An ACHE-Accredited Executive Program | $1,200 USD



Sharpen Your Strategic and Financial Leadership in Healthcare
This highly interactive program is designed exclusively for executives and fellows of the American College of Healthcare Executives (ACHE) who are ready to elevate their strategic and financial decision-making capabilities through immersive simulation-based learning.
Delivered over a series of six engaging Zoom sessions, the Applied Strategic Healthcare Leadership Course equips you with critical tools to drive performance in your healthcare organization while earning 12 ACHE continuing professional education credits.



What Makes This Course Unique?
Simulation-Based Learning: Leverage the industry-leading Healthcare Hero hospital management simulation, used in top-tier MHA and MBA programs globally.
Team-Based Executive Challenge: Work in teams to manage a virtual hospital, facing real-world challenges and dynamic market forces.
Experiential Learning: Make executive-level decisions across strategy, operations, and finance in a safe, competitive environment that mirrors the complexities of modern healthcare.
Facilitated by Experts: Guided by experienced healthcare and simulation facilitators with deep knowledge of executive leadership and health system strategy.



Course Format
6 x 2-hour Zoom sessions (12 contact hours total)
The zoom sessions will run weekly from Saturday 11am-1pm Eastern, starting on April 5th
Combines strategic and financial management lectures with 8 intensive simulation rounds
Practice rounds to build confidence, followed by a competitive live game
Final session includes a powerful executive debrief to help you apply insights directly to your organization



Key Learning Outcomes
By completing this program, you will:
✔ Apply advanced strategy frameworks tailored to healthcare
 ✔ Strengthen your financial leadership with healthcare-specific KPIs and analysis
 ✔ Improve team-based executive decision-making under real-world pressure
 ✔ Learn how to balance mission, margin, and market dynamics
 ✔ Take home actionable insights to drive performance improvement in your role



Who Should Enroll
This course is ideal for:
ACHE members and fellows seeking executive-level simulation training
Healthcare executives responsible for strategy, operations, or finance
MHA/MBA graduates looking to sharpen applied skills
Leaders preparing for expanded organizational responsibility



Program Fee
💲 $1,200 USD
 (Includes full simulation access, live facilitation, team coaching, and all course materials.)



Enroll Now



About the Simulation
Healthcare Hero is a highly acclaimed hospital management simulation designed to challenge participants with the real-world complexities of running a competitive healthcare system. Trusted by leading universities and executive education programs worldwide.

Frequently Asked Questions
1. Who is this course designed for?
This program is specifically designed for healthcare executives, ACHE members, and fellows who wish to enhance their strategic, financial, and leadership capabilities through applied learning. It’s also ideal for senior managers preparing for executive roles.
2. How does the Healthcare Hero simulation work?
Healthcare Hero is an interactive, web-based hospital management simulation. Working in teams, you will make key decisions across hospital strategy, operations, and finance, while competing against other teams in a dynamic, simulated healthcare market. No prior simulation experience is required—full guidance will be provided.
3. How much time will I need to commit?
The program consists of 6 x 2-hour Zoom sessions (12 hours total), spread over several weeks. Between sessions, you may wish to review materials or discuss strategies with your team, but no additional time commitment is required.
4. What topics will be covered?
You will explore critical areas such as healthcare strategy, financial management, team leadership, and decision-making under pressure. The course blends applied simulation rounds with lectures on strategic management and financial leadership in healthcare.
5. Will I earn ACHE continuing professional education (CPE) credits?
Yes, this program is eligible for 12 ACHE-approved CPE credits, contributing toward your ongoing professional development.
6. Do I need prior experience with simulations?
No simulation experience is needed. The first sessions include practice rounds and onboarding to help you get comfortable with the platform and decision-making process.
7. How will teams be formed?
Participants will be assigned to teams during the first session to encourage collaboration, peer learning, and networking. Team performance will be key to success in the simulation.
8. What’s included in the course fee?
Your $1,200 USD fee includes access to the Healthcare Hero simulation, live facilitation, course materials, team coaching, and participation in all Zoom sessions.
9. Is there a certificate of completion?
Yes, participants will receive a certificate of completion after finishing the course and simulation rounds. This can be used to demonstrate CPE credits to ACHE.
10. Can I cancel or transfer my registration?
Cancellations are allowed up to 14 days before the course start date for a full refund. Transfers to a future cohort are available subject to availability. Please contact us directly to process cancellations or transfers.


HFX Training

Applied Strategic Healthcare Leadership

This five-day course is a must for anyone who is considering or already working in a role with site manager responsibilities. This course covers all relevant legislation affecting safe working in the building, construction, and civil engineering industries.
It is endorsed by Build UK as the standard training for all construction managers.
Aims
To give a clear understanding of health, safety, welfare, and environmental legislation that affects your management role. It highlights the need for risk assessment in the workplace, the implementation of the necessary control measures and adequate communication to sustain a health and safety culture within the workforce.
Course Content
To give a clear understanding of health, safety, welfare, and environmental legislation that affects your management role. It highlights the need for risk assessment in the workplace, the implementation of the necessary control measures and adequate communication to sustain a health and safety culture within the workforce.
Course Content
• Health, safety, welfare and environmental legislation affecting your daily work
• New guidance and industry best practice
• Duties and responsibilities with regards to health, safety, welfare, and the environment
• Safe working
Prerequisites
This course is for you if you’re considering, or already have management responsibilities for planning, organising, monitoring, controlling and administering groups of staff e.g. site manager.
Assessment
At the end of this course, all delegates will have a clear understanding of controlling health and safety on site from a manager’s role.
Certificate
The certification for this course is valid for 5 years and is endorsed by Build UK as a standard training for all site managers.
To remain certified in this area, you will need to take a refresher course before the expiry date on your certificate, otherwise the full course will need to be retaken.
Instructions
Please note all online Site Management Safety Training Scheme courses with the venue “Online” will be delivered by a tutor over a video call.
This training will be delivered and assessed in English language; therefore, a good standard is required to complete the course.
Further attendee information will be sent in a separate email, please check your inbox.

Site Management Safety Training Scheme (SMSTS) 5 day course

Our Site Management Safety Training Scheme (SMSTS) refresher training courses, available both online and in-person, are designed for managers and individuals in positions of authority who completed their original SMSTS training program less than three years ago.

Aims
Participants will undertake a concise yet equally engaging training program covering all essential aspects of enforcing health and safety codes of practice at construction sites. Topics include in-depth discussions on risk assessments and effective methods for monitoring and managing industry-specific hazards.
Instructions
For online courses labeled “Remote Learning,” a tutor will deliver the training via video call.
All SMSTS courses are delivered and assessed in English. Participants must have a good command of the language to successfully complete the program.
Additional attendee information will be provided via email. Please ensure you check your inbox.


Site Management Safety Training Scheme (SMSTS) Refresher

Caerphilly

If you assess students knowledge, skills and competence in the workplace against industry or occupational standards. This is the industry standard qualification that you must hold. You must be able to work with 2 learners in the workplaces to demonstrate your assessing skills.The course is delivered split into 3 parts:<div style="color: rgb(75, 79, 88); box-sizing: border-box;" fr-original-style=" color: rgb(75, 79, 88);">&bull; 4 half day workshops delivered via Zoom&bull; The completion of 3 assignments.&bull; Practical work &ndash; carrying out assessment activity in the workplace</div>Through attending this course, you will be able to:<div style="color: rgb(75, 79, 88); box-sizing: border-box;" fr-original-style=" color: rgb(75, 79, 88);"><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;"><div style="color: rgb(58, 58, 58); box-sizing: border-box;" fr-original-style=" color: rgb(58, 58, 58);">Understand the role of an assessor and the principles and practices of assessment</div></li><li fr-original-style="" style="box-sizing: border-box;"><div style="color: rgb(58, 58, 58); box-sizing: border-box;" fr-original-style=" color: rgb(58, 58, 58);">Plan assessments in the workplace with at least two learners</div></li><li fr-original-style="" style="box-sizing: border-box;"><div style="color: rgb(58, 58, 58); box-sizing: border-box;" fr-original-style=" color: rgb(58, 58, 58);">Use different assessment methods, make assessment decisions and give feedback to learners</div></li><li fr-original-style="" style="box-sizing: border-box;"><div style="color: rgb(58, 58, 58); box-sizing: border-box;" fr-original-style=" color: rgb(58, 58, 58);">Involve learners and others in the assessment process &ndash; ensuring decisions are countersigned, quality assured and that assessment practice is standardised Apply legal and regulatory requirements to your assessment</div></li></ul></div><div style="color: rgb(75, 79, 88); box-sizing: border-box;" fr-original-style=" color: rgb(75, 79, 88);"><div style="color: rgb(58, 58, 58); box-sizing: border-box;" fr-original-style=" color: rgb(58, 58, 58);"> </div></div><hr fr-original-style="" style="border-color: var(--border-muted); border-style: solid; clear: both; break-after: page; user-select: none; box-sizing: border-box;"><div style="color: rgb(75, 79, 88); box-sizing: border-box;" fr-original-style=" color: rgb(75, 79, 88);"><h2 style="color: var(--ast-global-color-2); box-sizing: border-box;" fr-original-style=" color: var(--ast-global-color-2);">Further Information</h2><ul style="color: rgb(75, 79, 88); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(75, 79, 88);"><li fr-original-style="" style="box-sizing: border-box;">To complete this qualification you must have access to 2 learners in the workplace who are working towards industry or qualification standards.</li></ul><ul style="color: rgb(75, 79, 88); box-sizing: border-box;" fr-original-style=" color: rgb(75, 79, 88);"><li fr-original-style="" style="box-sizing: border-box;">We are working in partnership with Bridgend College to fund this course &ndash; please ask us about eligibility requirements.</li><li fr-original-style="" style="box-sizing: border-box;">Please read the Terms and Conditions associated with this course.</li></ul></div><div style="color: var(--ast-global-color-5); box-sizing: border-box;" fr-original-style=" color: var(--ast-global-color-5);"> </div><hr fr-original-style="" style="border-color: var(--border-muted); border-style: solid; clear: both; break-after: page; user-select: none; box-sizing: border-box;"><h2 style="color: var(--ast-global-color-2); box-sizing: border-box;" id="isPasted" fr-original-style=" color: var(--ast-global-color-2);">Benefits</h2><div style="color: rgb(75, 79, 88); box-sizing: border-box;" fr-original-style=" color: rgb(75, 79, 88);"><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;"><div style="color: rgb(58, 58, 58); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(58, 58, 58);">Gain the industry standard qualification to be a workplace assessor</div></li><li fr-original-style="" style="box-sizing: border-box;"><div style="color: rgb(58, 58, 58); box-sizing: border-box;" fr-original-style=" color: rgb(58, 58, 58);">Interactive online workshops and one to one support to complete assignments</div></li><li fr-original-style="" style="box-sizing: border-box;"><div style="color: rgb(58, 58, 58); box-sizing: border-box;" fr-original-style=" color: rgb(58, 58, 58);">One to one mentoring to support achievement of the practical unit</div></li><li fr-original-style="" style="box-sizing: border-box;"><div style="color: rgb(58, 58, 58); box-sizing: border-box;" fr-original-style=" color: rgb(58, 58, 58);">Course delivery and mentoring support with an experienced assessor</div></li></ul></div>

If you assess students' knowledge, skills and competence in the workplace against industry or occupational standards, this is the industry standard qualification that you must hold. You must be able to work with 2 learners in the workplace to demonstrate your assessing skills.
The course is delivered split into 3 parts:
• 4 half day workshops delivered via Zoom
• The completion of 3 assignments.
• Practical work – carrying out assessment activity in the workplace
Through attending this course, you will be able to:
Understand the role of an assessor and the principles and practices of assessment
Plan assessments in the workplace with at least two learners
Use different assessment methods, make assessment decisions and give feedback to learners
Involve learners and others in the assessment process – ensuring decisions are countersigned, quality assured and that assessment practice is standardised
Apply legal and regulatory requirements to your assessment



Further Information
To complete this qualification you must have access to 2 learners in the workplace who are working towards industry or qualification standards.
We are working in partnership with Bridgend College to fund this course – please ask us about eligibility requirements.
Please read the Terms and Conditions associated with this course.




Benefits
Gain the industry standard qualification to be a workplace assessor
Interactive online workshops and one to one support to complete assignments
One to one mentoring to support achievement of the practical unit
Course delivery and mentoring support with an experienced assessor

Panda Education and Training Ltd

A1 Assessor

Certificate in Assessing Vocational Achievement (CAVA)

Assessor Training

Level 3 Certificate in Assessing Vocational Achievement

About this course
This course gives every learner like you really good foundational stones of what is required to become a professional medium or psychic.  You’ll gain new skills, upgrading your ability, and possibly turning it into a new career should you choose to do so.  

By completing this course, you will gain vital information and knowledge giving you the confidence to start conducting short, accurate, evidential mediumship in-person and on-zoom readings, connecting you to people all around the world.

The Mechanics of Mediumship helps learners like you become a more impactful, professional medium who holds up the banner for spiritual integrity. A medium who works in the light, with compassion and respect for the sitter, the spirit communicator and ultimately those spirit side of life.

I will teach you how to deliver industry ‘best practices’ in both your psychic and in your mediumship work, as well as giving you resources to aid in your spiritual learning and development.  I'll also share guidance so you too can deliver those amazing, accurate, impactful, evidential readings. That will offer hope, love, courage and healing to those you seek you out. And for some you’ll provide the much-needed closure needed in their grief journey, as you provide evidence that life does really continue past this physical death. 

Life like love does not die. It just moves from one dimension to another, and if we take the time, we can connect with loved ones gone before us.

What you will learn.
This course runs over 5 weeks and during our time together we will explore:
1: What mediumship is and the different types, including your role as a professional medium and the differences between working in the psychic modality and when you are connected to spirit. 
2: Activating and building your power within, and the difference between meditation, and attunement both to the spirit world and using your psychic modality.
3: The six different senses available to you, which are your strongest and whether you are perceiving them objectively or subjectively. 
4: What is and what is not evidence in mediumship, understanding the different types of evidence available and defining practical and emotional evidence.
5: Surrendering to spirit, building confidence to receive specific unique information, and understanding the reasons why you receive a no response.  Guidance on making positive, strong, statements filling your sitter with confidence, building a truly extraordinary professional reading.

The Psychic Medium Handbook

Psychic Development

The Mechanics of Mediumship.  A beginners guide to everything you need to know.  How to become a professional psychic medium.  Able to give short, accurate, evidential messages.  
This course runs over 5 weeks and during our time together we will explore five easy to follow parts.
1: What mediumship is and the different types, including your role as a professional medium and the differences between working in the psychic modality and when you are connected to spirit. 
2: Activating and building your power within, and the difference between meditation, and attunement both to the spirit world and using your psychic modality.
3: The six different senses available to you, which are your strongest and whether you are perceiving them objectively or subjectively. 
4: What is and what is not evidence in mediumship, understanding the different types of evidence available and defining practical and emotional evidence.
5: Surrendering to spirit, building confidence to receive specific unique information, and understanding the reasons why you receive a no response.  Guidance on making positive, strong, statements filling your sitter with confidence, building a truly extraordinary professional reading.


The Mechanics of Mediumship Spring

Much Wenlock

RQF level 1 Awareness of First Aid for Mental Health
Each year approximately 1 in 4 people in the UK will experience a mental health condition and at least 1 in 6 employees experience common mental health problems in the workplace. Research has shown that work is the biggest cause of stress which can stop people performing at their best.

Mental health conditions are often hidden due to stigma and fear of discrimination and research has shown that a culture of fear and silence around mental health is costly to employers. The HSE guidance 'First aid needs assessment’ refers to mental health in the workplace.

This 4-hour qualification provides learners with the knowledge to recognise a range of mental health conditions, how to start a supportive conversation and when and how to signpost a person to seek appropriate professional help. Learners will know how to recognise and manage stress.

Learners will not diagnose or treat mental health conditions as this can only be carried out by healthcare professionals but will gain the knowledge to identify when a person may have a condition and know where they can go to get help.




Suitability - Who should attend?
Here are some examples of who may benefit from attending the RQF Level 1 Award in Awareness of First Aid for Mental Health:

Employees and workers: This course is relevant for individuals in any industry who may encounter colleagues or clients experiencing mental health difficulties. It can be particularly valuable for human resources personnel, line managers, supervisors, or team leaders responsible for the well-being of employees.
Teachers and educators: Professionals working in schools, colleges, or other educational institutions can benefit from this training to better understand and support the mental health needs of students.
Healthcare and social care workers: Individuals working in healthcare or social care settings, such as nurses, care assistants, support workers, or counsellors, can enhance their understanding of mental health issues and improve their ability to provide appropriate support.
Community and voluntary workers: People involved in community or voluntary organizations, including youth workers, social workers, volunteers, or community leaders, can gain valuable insights into mental health awareness and support.
Personal relationships and caregivers: The Level 1 training can also be beneficial for individuals who have personal relationships with someone experiencing mental health challenges. This may include family members, friends, or caregivers who want to enhance their understanding and offer appropriate assistance.

It is important to note that the Level 1 Award in Awareness of First Aid for Mental Health RQF is an introductory course and does not qualify participants to provide formal mental health interventions or therapy. However, it serves as a foundation for further training and can contribute to creating a more mentally healthy and supportive environment in various settings.




Outcome / Qualification etc.
Upon successful completion of the RQF Level 1 Awareness of First Aid for Mental Health course, participants can expect to achieve the following outcomes:

Increased Awareness and Understanding: Participants will develop a basic awareness and understanding of mental health and mental health issues. They will gain knowledge about common mental health conditions, their signs and symptoms, and the importance of mental health in overall well-being.
Recognition of Mental Health Signs: Participants will learn to recognize common signs of mental health issues in themselves and others. They will gain an understanding of the importance of early identification and intervention in promoting mental health and seeking appropriate support.
Reduced Stigma and Improved Attitudes: The course aims to challenge stigmas and stereotypes associated with mental health. Participants will develop a more empathetic and supportive attitude towards individuals experiencing mental health challenges, promoting a positive and inclusive environment.
Enhanced Communication Skills: Participants will learn basic communication skills for engaging with individuals experiencing mental health issues. They will gain an understanding of the importance of active listening, empathy, and non-judgmental communication in providing initial support.
Signposting and Seeking Help: Participants will be equipped with knowledge about available resources, services, and support networks for mental health. They will learn about signposting individuals to appropriate professional help and self-help resources.
Self-Care and Well-being Strategies: The course may provide participants with practical strategies for maintaining their own mental well-being. They may learn basic self-care techniques and stress management strategies to support their own mental health.
Certificate of Completion: Upon successful completion of the course, participants will receive a certificate indicating their achievement of the RQF Level 1 Awareness of First Aid for Mental Health qualification.

It's important to note that the Level 1 course provides a basic introduction to mental health awareness and first aid. It is not intended to provide participants with the qualifications or skills to diagnose or treat mental health conditions. Instead, it aims to promote mental health literacy, reduce stigma, and provide individuals with the knowledge to offer initial support and signposting to individuals in need.

The Level 1 course can serve as a foundation for further learning and progression in the field of mental health. Individuals may choose to pursue higher-level courses or qualifications to develop more advanced skills and knowledge in mental health first aid or other related areas.




Training Course Content
MODULE 1 INTRODUCTION
Session content Trainer/assessor introduction
Learner introductions
Course information
• Administration
• Learning outcomes and assessment criteria
• Reasonable adjustments
• Certification
• Complaints and appeals
• Assessment information
Session duration 15 minutes

MODULE 2 WHAT IS FIRST AID FOR MENTAL HEALTH?
Session content Definitions
Role and responsibilities of a First Aider
The impact of mental health issues
Mental health stigma
Statistics
Session duration 25 minutes

MODULE 3 IDENTIFYING MENTAL HEALTH CONDITIONS
Session content Mental health continuum
Mental health risk factors
Early warning signs
Session duration 25 minutes

MODULE 4 PROVIDING ADVICE AND STARTING A CONVERSATION
Session content How to start a difficult conversation
Non-judgemental listening skills
When to contact the emergency services
The First Aider’s own health and emotions
Session duration 40 minutes

MODULE 5 STRESS
Session content What is stress?
Causes of stress
Effects of stress
Coping strategies
Session duration 25 minutes

MODULE 6 MENTAL HEALTH CONDITIONS
Session content Depression
Anxiety
Psychosis
Eating disorders
Suicide
Self-harm
Session duration 70 minutes

MODULE 7 ASSESSMENT AND COURSE CLOSURE
Session content Written assessment paper
Course administration
Course closure
Session duration 40 minute




Course delivery details
Classroom-Based
A minimum of 4 hours spread over at least one day. Ideally, the course should be run in one day, but must be completed within 2 weeks of
starting the course, with each training session a minimum of two hours.

Online/Virtual classroom
The qualification has 2 assigned guided learning hours (GLH) and 5 hours total qualification time (TQT). GLH indicates the number of contact
hours that the learner will have with the trainer/assessor. TQT includes GLH but considers unsupervised learning and is an estimate of how long the average learner will take to achieve the qualification.




Why choose Madeleys First Aid Plus

Founded in 2021 after Louise left 30 years in the NHS as an Advanced practitioner in A&E/ITU, had spent 1.5 years in Covid ITU

Won FSB Best start-up business in the West Midlands in May 2023

Now trained 100's of delegates in Physical and Mental Health First Aid




Expenses
Travel costs and lunch required, there are many cafes and sandwich bars here in Much Wenlock to buy your lunch, you may eat it in the training room.
All training material, books, qualification certificates are included in the price.




Continuing Studies
After completing the RQF Level 1 Awareness of First Aid for Mental Health course, individuals can consider various progression options to further their knowledge and skills in mental health support. Here are some potential pathways:
RQF Level 2 Award in First Aid for Mental Health: This qualification builds upon the knowledge gained in the Level 1 course and provides a more comprehensive understanding of mental health issues and how to provide appropriate support. It covers topics such as recognizing mental health conditions, promoting well-being, and providing initial support to those in crisis.
RQF Level 3 Award in Supervising First Aid for Mental Health: For individuals who aspire to take on leadership or supervisory roles in mental health support, the Level 3 qualification is a logical progression. It provides in-depth knowledge and skills to supervise and manage a team of individuals providing first aid for mental health.
Continued Professional Development (CPD): Engaging in ongoing CPD activities is essential for staying updated with the latest developments in mental health support. Individuals can attend workshops, seminars, or conferences related to mental health, trauma, or specific areas of interest within the field.
Applied Practice: Applying the knowledge gained from the Level 1 course in real-world settings is crucial for developing practical skills. Individuals can seek opportunities to work or volunteer in environments where mental health support is needed, such as community organizations, schools, or helplines.
Mental Health Support Training Programs: There are various specialized training programs available that focus on specific aspects of mental health support, such as suicide prevention, trauma-informed care, or supporting individuals with specific mental health conditions. These programs can provide individuals with additional expertise and deepen their understanding of specific areas within mental health support.
Higher Education: Individuals who wish to pursue a more in-depth study of mental health can consider higher education programs in psychology, counseling, social work, or related fields. These programs provide comprehensive knowledge and training in mental health support and may lead to professional certifications or degrees.

It's important for individuals to research and explore progression options that align with their specific career goals, interests, and local requirements. Different countries or regions may have varying certification or training requirements for mental health support roles, so it's advisable to check with relevant regulatory bodies or professional associations for specific guidance.

370 Industry courses in Pontllanfraith

Level 2 NVQ Certificate in Plant Operations - Fork Lift Trucks

By Dynamic Training and Assessments Ltd

BS7671 Wiring Regulations 18th Edition

By City Training Group

NPORS Crane / Lift Supervisor (N405)

By Dynamic Training and Assessments Ltd

Level 2 NVQ Certificate in Plant Operations - Sweeping and Cleaning

By Dynamic Training and Assessments Ltd

CPCS A44 Concrete Pump Trailer Mounted

By Dynamic Training and Assessments Ltd

Level 2 NVQ Certificate in Plant Operations - Laying and Distributing

By Dynamic Training and Assessments Ltd

Solid Fuel (Initial)

By City Training Group

Level 2 NVQ Diploma in Drilling Operations - Directional Drilling - Drill Fluid Operator

By Dynamic Training and Assessments Ltd

Level 2 NVQ Certificate in Plant Operations - Movement Guide

By Dynamic Training and Assessments Ltd

NPORS Cable Avoidance Tools (N304)

By Dynamic Training and Assessments Ltd

Search By Location