353 Industry courses in Coalville

Course Details: The level 1, 2 & 3 hybrid and electric vehicle mechanic courses include; Classroom based theory session Workshop practice session Examination and assessment Course Fees: Level 1 £160 + VAT per candidate Level 2 £396 + VAT per candidate Level 3 £659 + VAT per candidate Electric & Hybrid Course Information: IMI LEVEL 1 AWARD IN EV AWARENESS This programme is designed for individuals who may encounter electric/hybrid (all variations) vehicles and require safety awareness. It is suitable for non-technical people working in roles such as: Valeters Parts Sales and aftersales It is also suitable for individuals working in roles such as: Vehicle recovery Vehicle dismantlers Vehicle damage assessors Electric/hybrid professional vehicle drivers.   LEVEL 2 AWARD IN ELECTRIC/HYBRID VEHICLE ROUTINE MAINTENANCE ACTIVITIES  This award is designed for technicians who maintain and repair electric/hybrid vehicles. It contains the skills and knowledge required to work safely around a vehicle’s high & low voltage electrical system and electric drive train system, whilst carrying out repairs or maintenance. As a result, learners successfully completing this qualification will acquire significant core knowledge and skills and the ability to work safely around and maintain Electric/Hybrid vehicles.   LEVEL 3 AWARD IN ELECTRIC/HYBRID VEHICLE REPAIR AND REPLACEMENT The content of this qualification has been designed to give the learners the knowledge and skills required to work safely on Electric/Hybrid vehicles whilst carrying out diagnostic, testing and repair activities. This may include vehicles that may have or had damage to their high energy/electrical system. As a result, learners successfully completing this qualification will acquire significant core knowledge and skills, and the ability to remove and replace Electric/Hybrid vehicle high voltage components Entry Requirements The selection criteria for entry should take into account each applicants existing academic/vocational qualifications and experience. Level 1 EV awareness There is no eligibility requirement. Level 2 electric & hybrid vehicle training course Individuals will already have vehicle maintenance and repair knowledge and skills at level 2. Level 3 electric & hybrid vehicle training course Individuals will already have vehicle maintenance and repair knowledge and skills at level 3. Candidates who already hold the EV Level 2 qualification can do a one-day Level 3   Assessment In order to pass these qualifications, learners must demonstrate its learning outcomes by following and achieving its assessment components: a. IMI External Testing (online) b. IMI Practical Assessment What’s included: Support from fully qualified and experienced trainers Course training material Registration with the awarding body Examinations Fees and Certification To find out more, please use the live chat function, visit our contact page or call us on 024 76325880   Get up to speed with industry changes The automotive industry is constantly changing, but more so than ever before. The shift to electric vehicles is only going to continue to grow as environmental and consumer needs change. As hybrid and electric vehicles become more and more mainstream, mechanics/technicians must have the right skills and knowledge to keep up with new technologies and the demand for their maintenance and repair. This course is designed to teach you how to safely and effectively work on hybrid and electric vehicles as well as keep up with the constantly evolving technology. Upon completion of this electric vehicle training course, technicians will be able to demonstrate they have the skills and knowledge needed for repairing vehicles with high voltage hybrid and electrical technologies. Future-proofed skills As more consumers make the shift to hybrid and electric vehicles, the demand for knowledgeable mechanics is increasing exponentially. This new market is ideal to expand your customer base and grow your business. Safety is always the number one priority for any vehicle technician, this course will teach you how to approach an electric vehicle and work on it safely. Our experienced instructors will teach you invaluable skills such as disengaging battery cells and the different hazards associated with high-energy electricals. Electric vehicles are quickly becoming a common sight on UK roads and will soon be the new normal, ensuring you get ahead of the trend with our electric car mechanic course means you will be ready for when the vast majority of your customers are in these types of cars.

The Level 2 NVQ Certificate in Plant Operations (Construction) -Compacting qualification has been developed for achievement in a real workplace environment which means you need to be employed to undertake this qualification. This qualification enables you, the learner, to demonstrate and recognise your skills, knowledge and understanding and to demonstrate your competence in a real workplace environment so you can work in Compacting within the construction industry. You will be assessed against a set of performance and knowledge statements which have been derived from National Occupational Standards for your occupational area. You will be assessed by an occupationally competent and qualified assessor whose job is to work with you and help you complete your qualification. This qualification supports the learner to attain enabling, fundamental and transferable practical skills with associated underpinning knowledge. The learner will learn key practical skills and knowledge in these mandatory units: -Conforming to General Health, Safety and Welfare in the Workplace -Conforming to Productive Working Practices in the Workplace The learner will also learn key practical skills and knowledge in one of the following optional units: -Preparing and operating soil compactors to compact materials in the workplace -Preparing and operating landfill compactors to compact materials in the workplace -Preparing and operating ride-on rollers to compact materials in the workplace Entry Requirements There are no formal entry requirements to take this qualification. This qualification can be undertaken without any previous training or qualifications in this subject area.

Level 2 NVQ Certificate in Plant Operations - Work Platforms

Level 2 NVQ Certificate in Plant Operations - Excavating

Level 2 NVQ Diploma in Piling Rig Operations - Piling Rig Operative

Level 2 NVQ Diploma in Plant Operations - Loading and Securing

Emotional Intelligence, EQ, EI, Moccasin Approach, Moccasin Manager,

Course Overview The Level 2 NVQ Diploma in Plant Operations -Extracting Plant qualification has been developed for achievement in a real workplace environment which means you need to be employed to undertake this qualification.  This qualification enables you, the learner, to demonstrate and recognise your skills, knowledge and understanding and to demonstrate your competence in a real workplace environment so you can work as a Plant Operator within the construction industry.  You will be assessed against a set of performance and knowledge statements which have been derived from National Occupational Standards for your occupational area. You will be assessed by an occupationally competent and qualified assessor whose job is to work with you and help you complete your qualification.  This qualification supports the learner to attain enabling, fundamental and transferable practical skills with associated underpinning knowledge.  The learner will learn key practical skills and knowledge in these mandatory units:  Conforming to General Health, Safety and Welfare in the Workplace Conforming to Productive Working Practices in the Workplace. The learner will also learn key practical skills and knowledge in one of the following optional units: Preparing and operating draglines to extract ground and/or loose materials in the workplace Preparing and operating 180 degree excavators to extract and excavate ground and loose materials in the workplace Preparing and operating tracked loading shovels to extract ground and loose materials in the workplace Preparing and operating tracked loading shovels to extract, transport and distribute materials in the workplace Preparing and operating 360 degree excavators to extract ground, face and/or loose materials in the workplace Preparing and operating trenchers to extract ground and/or loose materials in the workplace Preparing and operating crawler tractor dozers to carry out dozer operations in the workplace. Entry Requirements There are no formal entry requirements to take this qualification. This qualification can be undertaken without any previous training or qualifications in this subject area.

About this Training Course The drill string is the simplest piece of equipment in use on a drilling rig and at the same time, the most critical piece. We use the qualifier 'basic' because although 99% of the drill string comprises plain tubes that are just screwed together, the lowest section, just above the bit, can go to extreme loading and is fitted with highly sophisticated electronics packages providing both positional and lithological data as well as a steering system to drive and orient the bit. The principle tasks of the drill string are also deceptively simple. These are to: Convey each drill bit to the bottom of the hole and then to retrieve it when worn, Act as a conduit to convey drilling fluid at high pressure down to the bit and Transmit torque from surface to bit, occasionally in concert with a hydraulic motor to drive this bit. This 3 full-day course will cover in detail what it takes to decide on minimum drill string specifications, which are able to support the loads to which it will be subjected. In addition to the need to use a drill string with minimum strength requirements, we also need to ensure that we can prevent drill string failure. If the failure consists of a small split or leak of any kind, then the time involved may be little more than that required for a roundtrip to change the bit. If the string parts, then the recovery is likely to take a considerable amount of time. In a worst case scenario, the fish in the hole may prove impossible to retrieve, requiring a sidetrack. A less than optimal design of the string will reduce the efficiency of the operation and almost always leads to premature bit wear. This is particularly true when we are unable to measure and control the dynamics of the drill string as a whole and the bottomhole assembly in particular. Axial vibrations, torsional vibrations and lateral vibrations may take place in various degrees of severity. The behaviour of the drill string while operating under torsional vibrations is thought to be of great importance and may result in torsional buckling. This course will also cover the drilling optimization limiters, how to identify them and how to remove them. This is done by understanding the drill string dynamics - by operating under the most favourable conditions and by measuring the dynamics in the vicinity of the bit (or at the bit) in order to make timely adjustments. Training Objectives The course homes in what office staff needs to know and plan for and what field staff needs to know and implement. By the end of this course, participants will be familiar with: Critical dimensions of common drill pipe and weld-on tool joints and its relation to yield for calculation of tensile, torsional and burst resistance. Make-up torque of connections that relate to the tool joint dimensions and the torsional strength of that connection. Use of design factors and safety factors on tensile and torsional strength in relation to new and worn state. Conditions which could lead to drill pipe collapse. Situations where limitations on sinusoidal (snake) and helical buckling will apply and the influence of radial clearance and deviation. Failure of drill pipe (fatigue) and the circumstances under which these would occur (rotation across doglegs, pipe in compression etc). Mechanism under which hardbanding would induce casing wear and the methods applied to measure and prevent any significant wear. Drill pipe inspection methods we apply to identify early flaws/cracks/corrosion, to measure dimensions, to inspect tool joints etc. Common BHA components, including heavy wall drill pipe, their external/internal dimensions, connections (API, proprietary) and appearance (such as spiral). Significance of thread compounds to ensure the correct make-up torque is applied. Significance of drill string/BHA 'neutral point' in the context of drill string component failure. Basic design principles for a BHA make-up in a vertical, low/medium deviated and highly deviated well in terms of weight transfer and drag/torque. Stabilization principles for a pendulum (vertical), a stabilized (vertical or tangent), a build and a drop-off assembly. BHA design and stabilization in relation to mitigation/elimination of vibration and to the elimination of tension, torsion or fatigue failure. Matching bit aggressiveness, gauge length, BHA stabilization, steerability and Mechanical Specific Energy (MSE) to mitigate the severity of any vibration. Bit efficiency and reduction of wear by understanding mechanical and hydraulic limiters. How to perform a passive or active drill-off test. Importance of being conversant with API 7G RP and/or equivalent data books, to look up/check the recommended tensile/torque and other parameters for the drill string in use. Target Audience This course is intended for staff directly or indirectly involved in the delivery of challenging wells such as junior to senior well engineers, both in office-based planning and operations and field-based operator/contractor supervisory staff such as company men and toolpushers. Trainer Your expert course leader has over 45 years of experience in the Oil & Gas industry. During that time, he has worked exclusively in the well engineering domain. After being employed in 1974 by Shell, one of the major oil & gas producing operators, he worked as an apprentice on drilling rigs in the Netherlands. After a year, he was sent for his first international assignment to the Sultanate of Oman where he climbed up the career ladder from Assistant Driller, to Driller, to wellsite Petroleum Engineer and eventually on-site Drilling Supervisor, actively engaged in the drilling of development and exploration wells in almost every corner of this vast desert area. At that time, drilling techniques were fairly basic and safety was just a buzz word, but such a situation propels learning and the fruits of 'doing-the-basics' are still reaped today when standing in front of a class. After some seven years in the Middle East, a series of other international assignments followed in places like the United Kingdom, Indonesia, Turkey, Denmark, China, Malaysia, and Russia. Apart from on-site drilling supervisory jobs on various types of drilling rigs (such as helicopter rigs) and working environments (such as jungle and artic), he was also assigned to research, to projects and to the company's learning centre. In research, he was responsible for promoting directional drilling and surveying and advised on the first horizontal wells being drilled, in projects, he was responsible for a high pressure drilling campaign in Nigeria while in the learning centre, he looked after the development of new engineers joining the company after graduating from university. He was also involved in international well control certification and served as chairman for a period of three years. In the last years of his active career, he worked again in China as a staff development manager, a position he nurtured because he was able to pass on his knowledge to a vast number of new employees once again. After retiring in 2015, he has delivered well engineering related courses in Australia, Indonesia, Brunei, Malaysia, China, South Korea, Thailand, India, Dubai, Qatar, Kuwait, The Netherlands, and the United States. The training he provides includes well control to obtain certification in drilling and well intervention, extended reach drilling, high pressure-high temperature drilling, stuck pipe prevention and a number of other ad-hoc courses. He thoroughly enjoys training and is keen to continue taking classes as an instructor for some time to come. POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information post training support and fees applicable Accreditions And Affliations

Level 2 NVQ Diploma in Plant Operations - Transporting Loads