• Professional Development
  • Medicine & Nursing
  • Arts & Crafts
  • Health & Wellbeing
  • Personal Development

136 Courses in Sheffield

C&G 2391-52, Initial and Periodic Inspection and Testing of Electrical Installations

By Technique Learning Solutions

City & Guilds 2391-52 Combined Course: Course Description The new Testing and Inspection City & Guilds 2391-52 Combined Course qualification replaces and is improved on the former 2394/2395 that was previously available to electricians but has since been withdrawn. City & Guilds 2391-52 course runs over five consecutive days, the first three days covering fundamental theory. The fourth day covering Initial Verification practical and revision. The fifth day of the City & Guilds 2391-52 course covering Periodic Inspection practical and revision with an open book 2 hours Multiple choice exam. A 5 day City & Guilds 2391-52 course for a student possessing knowledge of the wiring regulations and with minimal knowledge of inspection and testing, We strongly recommend City and Guilds 2382 is achieved prior to sitting this course, though this is NOT an entry requirement. In order to claim the full City & Guilds 2391-52 qualification, students must successfully complete the following: Completed during the course each student will sit a 2 hours online Multiple choice exam (open book) Then will have to reattend and complete a Practical Assessment which is 4hrs. Assessment – 2391-52 Task A – Visual Inspection – 30mins Task B – Periodic Inspection and Test – 2hrs and 30mins Task C – Short Answer Questions – 1hr and 20mins To further support this course, we offer a 1 day practical workshop (at the cost of £120.00 Net VAT) available to candidates who have completed the course and require further ‘hands on’ practical experience prior to their practical exam. Most students who take this option elect to complete this the day before their practical assessment. The City & Guilds 2391-52 course costs include examination entry fees. The Tutors: Our Tutors are qualified, highly experienced, enthusiastic, knowledgeable and extremely friendly, you can take full advantage of all the tips of the trade, personal experiences and practical advice they offer. This short theory course is intensive, but no compromise is made on the course content. The atmosphere is relaxed and enjoyable which creates a good learning environment. On-site Available Group Rate: (up to 8 people): £895.00 + VAT Per Day* plus £50.00 + VAT Exam Entry Fee per Student *(over 8 people, please call on 0800 112 3310 to discuss Group Rate) This course replaces City & Guilds 2394/2395 combined – Level 3. Essential Book supplied *throughout* course!First exam fee included!

C&G 2391-52, Initial and Periodic Inspection and Testing of Electrical Installations
Delivered in Scotland + 1 more or Online + more
£120

C&G 2391-50, Initial Verification of Electrical Installations

By Technique Learning Solutions

The City and Guilds 2391-50 electrical course has been designed to meet the needs of the electrical installation industry, and is aimed at practising electricians who have not carried out inspection and testing since qualifying or who require some update of training before going on to other City and Guilds qualifications. Candidates who achieve the City and Guilds 2391-50 qualification could progress on to the City and Guilds 2391-51: the Level 3 Certificate in Inspection, Testing and Certification of Electrical Installations. The City and Guilds 2391-50 course will focus on the teaching and learning of initial verification and certification of electrical installations. In order to claim the full City and Guilds 2391-50 qualification, students must successfully complete: One 1 hour 30 minute online multiple choice test to be completed during the courseOne 3 hour 30 minute practical test to be completed after the course, broken into two sections as follows:Task A – Initial Verification and Certification of the Complete Installation – 2hrs and 30minsTask B – Short Answer Questions – 1hr To further support this course, we offer a 1 day practical workshop (at the cost of £120.00 Net VAT) available to candidates who have completed the course and require further ‘hands on’ practical experience prior to their practical exam. Most students who take this option elect to complete this the day before their practical assessment. The City and Guilds 2391-50 course costs include examination entry fees.

C&G 2391-50, Initial Verification of Electrical Installations
Delivered in Scotland + 1 more or Online + more
£120

C&G 2391-51, Periodic Inspection and Testing of Electrical Installations

By Technique Learning Solutions

City and Guilds 2391-51, level 3, is ideal for people with limited experience of periodic inspection of electrical installations. If you are already working as an Electrician, but have not carried out inspection and testing since qualifying, or you require to update before moving onto other qualifications, then this 5 day City and Guilds 2391-51 course will be right for you. City and Guilds 2391-51 Course Content: Principles, practices and legislation for the periodic inspection, testing and condition reporting of electrical installations. Requirements for completing the safe isolation of electrical circuits and installations Requirements for inspecting, testing and recording the condition of electrical installations Requirements for completing the periodic inspection of electrical installations Differences between periodic inspection and initial verification Requirements for safe testing of electrical installations which have been put in to service Requirements for testing before circuits are live. Requirements for testing live installations Understanding and interpreting test results Requirements for the completion of electrical installation condition reports and associated documentation Confirmation of safety of system and equipment prior to completion of inspection, testing and commissioning Carrying out inspection of electrical installations prior to them being put into service Ability to test electrical installations prior to them being put into service Produce a condition report with recording observations and classification In order to claim the full City and Guilds 2391-51 qualification, students must successfully complete: One x1 hour 30 minute online multiple choice (Open Book) Exam to be completed during the course One x3 hours 30 minute practical test to be completed after the course, broken into sections as follows: Task A – Visual Inspection – 30mins Task B – Periodic Inspection and Test – 2hrs Task C – Short Answer Questions – 1hr To further support this course, we offer a 1 day practical workshop (at the cost of £120.00 Net VAT) available to candidates who have completed the course and require further ‘hands on’ practical experience prior to their practical exam. Most students who take this option elect to complete this the day before their practical assessment. The City and Guilds 2391-51 course costs include examination entry fees.

C&G 2391-51, Periodic Inspection and Testing of Electrical Installations
Delivered in Scotland + 1 more or Online + more
£120

Power Automate Training

By FourSquare Innovations Ltd

FourSquare Training specialise in private, corporate Power Automate courses delivered at your premises and tailored to your needs.

Power Automate Training
Delivered In-Person in Merseyside, or UK WideFlexible Dates
£1,600 to £2,000

Microsoft 365 Training

By FourSquare Innovations Ltd

FourSquare Training specialise in private, corporate Microsoft 365 courses delivered at your premises and tailored to your needs.

Microsoft 365 Training
Delivered In-Person in Merseyside, or UK WideFlexible Dates
£700 to £900

AutoCAD Training Courses

By FourSquare Innovations Ltd

Our regionally-based associate AutoCAD trainers come to your organisation to deliver small-group training when you need and at the level you require. Or, opt for live virtual classroom courses delivered via Microsoft Teams. One of our trainers will speak to you about the scope of your requirement and course lengths may vary depending upon your needs. Course Outlines AutoCAD 2D Beginners - 2 days AutoCAD 2D Intermediate - 2 days AutoCAD 3D Beginners - 1 day Advance Steel Beginners - 2 days Pricing £800.00 plus VAT per day for up to 6 learners and £125.00 plus VAT per day to cover travel and accommodation within mainland UK. Just add £50.00 plus VAT per additional learner up to the 8delegate maximum.

AutoCAD Training Courses
Delivered In-Person in Altrincham + 48 moreFlexible Dates
£800 to £900

Microsoft Teams Training

By FourSquare Innovations Ltd

FourSquare Training specialise in private, corporate Microsoft Teams courses delivered at your premises and tailored to your needs.

Microsoft Teams Training
Delivered In-Person in Merseyside, or UK WideFlexible Dates
£700 to £900

SharePoint Training

By FourSquare Innovations Ltd

FourSquare Training specialise in private, corporate SharePoint courses delivered at your premises and tailored to your needs.

SharePoint Training
Delivered In-Person in Merseyside, or UK WideFlexible Dates
£700 to £900

Subsidised workshops for schools in Bristol and Solihull

By Centre For Studies On Inclusive Education

CSIE is currently offering these workshops at highly subsidised rates (only £300+vat for a whole day of workshops) to schools in Bristol and Solihull, thanks to a grant from the Rix-Thompson-Rothenberg (RTR) Foundation and another grant from Tesco Stronger Starts. We are delighted to have won the public vote in south Bristol Tesco stores, enabling us to offer even more workshops at subsidised rates! Please book early to avoid disappointment – we’ll offer the subsidised rates on a first-come-first-served basis. Cost: £300+vat Optional extras: a) written responses to pupils’ anonymous questions (£50+vat) b) transcript of pupils’ feedback, as evidence of impact (£50+vat)

Subsidised workshops for schools in Bristol and Solihull
Delivered In-Person in Bristol or UK WideFlexible Dates
£300

Power BI Training

By FourSquare Innovations Ltd

FourSquare Training specialise in private, corporate Power BI courses delivered at your premises and tailored to your needs.

Power BI Training
Delivered In-Person in Merseyside, or UK WideFlexible Dates
£800 to £1,000

Educators matching "VAT"

Show all 11
Millhouses Accountancy Training & Development Ltd

millhouses accountancy training & development ltd

Sheffield

Xero is the global leader in online cloud accounting with over 300,000 existing customers in over 100 countries. This software is hosted in the cloud and customers can access it anywhere with the help of an internet connection, an email address and a password. It also has a mobile app for your mobile device allowing you to access your accounts on your mobile phone. It is designed to save you time in performing routine bookkeeping tasks on a day to day basis. Xero has a number of very useful features including the following: A dashboard allowing you to see at a glance the financial health of your business. Connect Xero to your bank accounts by bank feeds which upload transactions from your bank accounts into Xero allowing you to track cashflow and avoid the need to manually input transactions into Xero from your statements. Perform bank reconciliations with a few clicks of a button. Send invoices to customers online through Xero with online payment options. Reduce the time to get paid by including a pay now button. Chase outstanding payments with automatic reminders. Set up repeating invoice templates and have these automatically sent to your customers. Set up repeating bills (for repetitive monthly bills). Reducing data entry. Send statements to customers. Record your expenses. Run your payroll through Xero. File your Vat return with HMRC through Xero. File your statutory accounts and company tax return through Xero tax

Innovative Global Services

innovative global services

England

IGSS is your ‘One-Stop Total Solutions Provider’ in fab Build-Operate-Transfer (BOT) and Manufacturing Operational Excellence. TOTAL SOLUTIONS PARTNER IN GREENFIELD PROJECTS AND FAB TRANSFORMATION Offering a range of tailor-made service capabilities and a global network of providers, IGSS’ heritage of success is anchored on our business focus in driving startup, high-tech manufacturing and operational excellence goals. Providing solutions backed by international experience and proven implementation cases, our “one-stop service” approach spans the breadth of Build-Operate-Manage-Transfer (BOMT) to realise the ambitions of aspiring semiconductor nations and multi-billion-dollar entities, be it new, mature or distressed sites. With you, we aim to define the next generation facilities and high-tech parks, the world over. Launched in 2013, and based out of Singapore, Innovative Global Solutions and Services (IGSS) has been successfully delivering Plant Operation Optimisation and Fab/Foundry Transformation services to clients around the world. Led by a group of industry veterans with a combined 300 years of hands-on experience, the team’s track record and key achievements in the areas of Operational Excellence surpasses traditional methodologies and concepts. In a business that is powered by people with relentless passion, in-depth knowledge, and a global network of specialist partners, IGSS is an ideal partner in transformations for achieving innovative plant services through programmes that drive world-class productivity, business optimisation and global standardisation for business sustainability.