For boards and staff, board meetings always involve too much time, too much effort, too much material to review, and too few tools to make governance effective. &nbsp;Here are the top tools, tips and timesavers boards around the world use to make your impossible boardroom tasks do-able.

For boards and staff, board meetings always involve too much time, too much effort, too much material to review, and too few tools to make governance effective. Here are the top tools, tips and timesavers boards around the world use to make your impossible boardroom tasks do-able.

Ralph Ward

For boards and staff, board meetings always involve too much time, too much effort, too much material to review, and too few tools to make governance effective.  Here are the top tools, tips and timesavers boards around the world use to make your impossible boardroom tasks do-able.

Best Practice Board Meeting Tips

Mountain Ash

<div style="color: rgb(0, 41, 112); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 41, 112);"><div style="color: rgb(0, 41, 112); box-sizing: border-box;" fr-original-style=" color: rgb(0, 41, 112);"><h1 data-element-type="paragraph" style="color: rgb(33, 34, 38); box-sizing: border-box;" fr-original-style=" color: rgb(33, 34, 38);">Level 2 PAT Testing Training Course - CPD AccreditedIET Code of Practice for In-service Inspection and Testing of Electrical Equipment (5th Edition)</h1><div data-element-type="paragraph" fr-original-style="" style="box-sizing: border-box;">We have over 20 years field experience of inspection and testing of electrical equipment - We can bring that experience to you.If you are considering Online Learning or DVD please refer to the note at the bottom of this page.</div></div></div><div style="color: rgb(0, 41, 112); box-sizing: border-box;" fr-original-style=" color: rgb(0, 41, 112);"><div style="color: rgb(0, 41, 112); box-sizing: border-box;" fr-original-style=" color: rgb(0, 41, 112);"><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Relevant Legislation and Statutory Instruments.</li><li fr-original-style="" style="box-sizing: border-box;">Management and responsibilities.</li><li fr-original-style="" style="box-sizing: border-box;">Equipment classifications and construction.</li><li fr-original-style="" style="box-sizing: border-box;">SELV (Safety Extra Low Voltage) Equipment.</li><li fr-original-style="" style="box-sizing: border-box;">Basic electrical theory for PAT : Voltage - Resistance - Current - Power - Earthing - Insulation.</li><li fr-original-style="" style="box-sizing: border-box;">The safe use of adaptors and the thermal effects of overload.</li><li fr-original-style="" style="box-sizing: border-box;">Fuses and the importance of ratings</li><li fr-original-style="" style="box-sizing: border-box;">In-rush currents</li><li fr-original-style="" style="box-sizing: border-box;">Mains Filtering and Surge Protection</li><li fr-original-style="" style="box-sizing: border-box;">Units of Measurement and interpretation of results&nbsp;</li><li fr-original-style="" style="box-sizing: border-box;">Introducing a planned maintenance system.</li><li fr-original-style="" style="box-sizing: border-box;">User Checks.</li><li fr-original-style="" style="box-sizing: border-box;">Formal Visual Inspections.</li><li fr-original-style="" style="box-sizing: border-box;">The &#39;Essential&#39; Electrical Tests.</li></ul></div><div style="color: rgb(0, 41, 112); box-sizing: border-box;" fr-original-style=" color: rgb(0, 41, 112);">One and Two Day&nbsp;Pat Testing Training Course available with 2 Years Ongoing Assistance if required - Duty Holder Training &amp; Bespoke PAT Testing Starter Kits.&nbsp;We can come to YOUR Workplace<div data-element-type="image" data-widget-type="image" fr-original-style="" style="box-sizing: border-box;"><a data-caption="This Course is CPD Accredited" style="color: rgb(70, 57, 57); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(70, 57, 57);"><img src="https://lirp.cdn-website.com/fb614f94/dms3rep/multi/opt/CPDcertified-1920w.png" alt="CPD Certified Course" data-dm-image-path="https://irp-cdn.multiscreensite.com/fb614f94/dms3rep/multi/CPDcertified.png" title="This Course is CPD Accredited and Certified" fr-original-style="" style="cursor: pointer; padding: 0px 1px; user-select: none; max-width: 100%; position: relative; box-sizing: border-box;" fr-original-class="fr-draggable"></a></div></div></div><div style="color: rgb(0, 41, 112); box-sizing: border-box;" fr-original-style=" color: rgb(0, 41, 112);"><div style="color: rgb(0, 41, 112); box-sizing: border-box;" fr-original-style=" color: rgb(0, 41, 112);">PRACTICAL Assessment</div></div><div style="color: rgb(0, 41, 112); box-sizing: border-box;" fr-original-style=" color: rgb(0, 41, 112);"><div style="color: rgb(0, 41, 112); box-sizing: border-box;" fr-original-style=" color: rgb(0, 41, 112);"><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">PRACTICAL: Formal Visual Inspection</li><li fr-original-style="" style="box-sizing: border-box;">PRACTICAL: Earth Bond Resistance Testing</li><li fr-original-style="" style="box-sizing: border-box;">PRACTICAL: Insulation Resistance Testing @500VDC and 250VDC</li><li fr-original-style="" style="box-sizing: border-box;">PRACTICAL: Combined Inspection &amp; Electrical Testing of Extension Leads</li><li fr-original-style="" style="box-sizing: border-box;">PRACTICAL: Polarity Testing</li><li fr-original-style="" style="box-sizing: border-box;">PRACTICAL: Electrical Testing of Surge Protected Devices and Sensitive I.T Equipment.</li><li fr-original-style="" style="box-sizing: border-box;">PRACTICAL : Portable 30mA RCD Trip Time Test</li><li fr-original-style="" style="box-sizing: border-box;">PRACTICAL: Electrical Testing of Current Leakage</li><li fr-original-style="" style="box-sizing: border-box;">PRACTICAL: Demonstrate the ability to use technical discretion over pre set instrument parameters.</li></ul><div data-element-type="paragraph" fr-original-style="" style="box-sizing: border-box;">We deliver Workplace PAT Testing Courses across most of the UK to assist businesses with Compliance. We also work with Bridges into Work and ReACT in association with Careers Wales and the Welsh Government to offer work based skills which some Candidates could be eligible for Government funding.</div><div data-element-type="image" data-widget-type="image" fr-original-style="" style="box-sizing: border-box;"><a style="color: rgb(70, 57, 57); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(70, 57, 57);"><img src="https://lirp.cdn-website.com/fb614f94/dms3rep/multi/opt/Welsh+Government+1-1920w.png" data-dm-image-path="https://irp-cdn.multiscreensite.com/fb614f94/dms3rep/multi/Welsh+Government+1.png" alt="Welsh Government" fr-original-style="" style="cursor: pointer; padding: 0px 1px; user-select: none; max-width: 100%; position: relative; box-sizing: border-box;" fr-original-class="fr-draggable"></a></div>&nbsp;<div data-element-type="image" data-widget-type="image" fr-original-style="" style="box-sizing: border-box;"><a style="color: rgb(70, 57, 57); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(70, 57, 57);"><img src="https://lirp.cdn-website.com/fb614f94/dms3rep/multi/opt/Careers+Wales-1920w.png" data-dm-image-path="https://irp-cdn.multiscreensite.com/fb614f94/dms3rep/multi/Careers+Wales.png" alt="Careers Wales" fr-original-style="" style="cursor: pointer; padding: 0px 1px; user-select: none; max-width: 100%; position: relative; box-sizing: border-box;" fr-original-class="fr-draggable"></a></div><a data-display-type="block" href="https://worksafepat.com/react-funding---funded-training" data-element-type="dButtonLinkId" target="_blank" style="color: rgb(70, 57, 57); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(70, 57, 57);">Fully Funded Training&nbsp;</a></div><div style="color: rgb(0, 41, 112); box-sizing: border-box;" fr-original-style=" color: rgb(0, 41, 112);"><div data-element-type="image" data-widget-type="image" fr-original-style="" style="box-sizing: border-box;"><img src="https://lirp.cdn-website.com/fb614f94/dms3rep/multi/opt/14556528_1385701921447830_158288095912982065_o-1920w.jpg" data-dm-image-path="https://irp-cdn.multiscreensite.com/fb614f94/dms3rep/multi/14556528_1385701921447830_158288095912982065_o.jpg" alt="worksafepat practical and theory" title="WORKSAFEPAT Theory and Practical Workshop" fr-original-style="" style="cursor: pointer; padding: 0px 1px; user-select: none; max-width: 100%; position: relative; box-sizing: border-box;" fr-original-class="fr-draggable"></div><div data-element-type="paragraph" data-version="5" fr-original-style="" style="box-sizing: border-box;">Please use diligence when sourcing training providers online you should be cautious of Online Courses and DVD&#39;s. The Health and Safety Executive advise competence at two levels (Guidance Notes HSG107) 49) Combined inspection and testing requires a greater degree of competence (in terms of knowledge, training and experience) than for inspection alone, because appropriate electrical knowledge is needed to undertake the tests and interpret the test results. However, it can often be carried out by a competent employee. 50) People testing portable electrical equipment should be appropriately trained.It is the employer&rsquo;s duty to make sure that they are competent for the work they are to carry out. Level 1: requires no interpretation of results and limited to simple Pass/fail test instrument. (Simple Pass/fail instruments may fail some appliances unnecessarily where higher earth readings are present by design or mains filtered) Level 2: requires the user to have the ability &#39;competence&#39; to interpret test results by using a machine that displays individual results.We provide sufficient, accredited training at Level 2 so that a Duty Holder is able to make informed decisions on frequencies for inspecting and testing their workplace electrical appliances in accordance with HSE Guidance and the IET Code of Practice for In-service Inspection and Testing of Electrical Equipment. </div></div></div><div style="color: rgb(0, 41, 112); box-sizing: border-box;" fr-original-style=" color: rgb(0, 41, 112);"><div style="color: rgb(0, 41, 112); box-sizing: border-box;" fr-original-style=" color: rgb(0, 41, 112);"><div data-element-type="image" data-widget-type="image" fr-original-style="" style="box-sizing: border-box;"><a style="color: rgb(70, 57, 57); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(70, 57, 57);"><img src="https://lirp.cdn-website.com/fb614f94/dms3rep/multi/opt/Salsbury+Cathedral+New-1920w.png" data-dm-image-path="https://irp-cdn.multiscreensite.com/fb614f94/dms3rep/multi/Salsbury+Cathedral+New.png" alt="Salisbury Cathedral Logo" title="Worksafepat have provided Workplace Training for Maintenance Staff at Salisbury Cathedral" fr-original-style="" style="cursor: pointer; padding: 0px 1px; user-select: none; max-width: 100%; position: relative; box-sizing: border-box;" fr-original-class="fr-draggable"></a></div>&nbsp;<div data-element-type="image" data-widget-type="image" fr-original-style="" style="box-sizing: border-box;"><a style="color: rgb(70, 57, 57); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(70, 57, 57);"><img src="https://lirp.cdn-website.com/fb614f94/dms3rep/multi/opt/oxford+academy-1920w.png" data-dm-image-path="https://irp-cdn.multiscreensite.com/fb614f94/dms3rep/multi/oxford+academy.png" alt="Oxford Academy" fr-original-style="" style="cursor: pointer; padding: 0px 1px; user-select: none; max-width: 100%; position: relative; box-sizing: border-box;" fr-original-class="fr-draggable"></a></div>&nbsp;<div data-element-type="image" data-widget-type="image" fr-original-style="" style="box-sizing: border-box;"><img src="https://lirp.cdn-website.com/fb614f94/dms3rep/multi/opt/Puma+Energy+2-1920w.png" alt="" data-dm-image-path="https://irp.cdn-website.com/fb614f94/dms3rep/multi/Puma+Energy+2.png" width="225" height="192" fr-original-style="" style="cursor: pointer; padding: 0px 1px; user-select: none; max-width: 100%; position: relative; box-sizing: border-box;" fr-original-class="fr-draggable"></div>&nbsp;<div data-element-type="image" data-widget-type="image" fr-original-style="" style="box-sizing: border-box;"><img src="https://lirp.cdn-website.com/fb614f94/dms3rep/multi/opt/Airbus+Logo-1920w.png" alt="" data-dm-image-path="https://irp.cdn-website.com/fb614f94/dms3rep/multi/Airbus+Logo.png" width="228" height="60" fr-original-style="" style="cursor: pointer; padding: 0px 1px; user-select: none; max-width: 100%; position: relative; box-sizing: border-box;" fr-original-class="fr-draggable"></div>&nbsp;<div data-element-type="image" data-widget-type="image" fr-original-style="" style="box-sizing: border-box;"><a style="color: rgb(70, 57, 57); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(70, 57, 57);"><img src="https://lirp.cdn-website.com/fb614f94/dms3rep/multi/opt/mill+academy+logo+oxfordshire-1920w.png" data-dm-image-path="https://irp-cdn.multiscreensite.com/fb614f94/dms3rep/multi/mill+academy+logo+oxfordshire.png" alt="Oxford Academy" title="Worksafepat has delivered workplace training to Oxford Academy Schools" fr-original-style="" style="cursor: pointer; padding: 0px 1px; user-select: none; max-width: 100%; position: relative; box-sizing: border-box;" fr-original-class="fr-draggable"></a></div></div></div>

Level 2 PAT Testing Training Course - CPD AccreditedIET Code of Practice for In-service Inspection and Testing of Electrical Equipment (5th Edition)
We have over 20 years field experience of inspection and testing of electrical equipment - We can bring that experience to you.If you are considering Online Learning or DVD please refer to the note at the bottom of this page.
Relevant Legislation and Statutory Instruments.
Management and responsibilities.
Equipment classifications and construction.
SELV (Safety Extra Low Voltage) Equipment.
Basic electrical theory for PAT : Voltage - Resistance - Current - Power - Earthing - Insulation.
The safe use of adaptors and the thermal effects of overload.
Fuses and the importance of ratings
In-rush currents
Mains Filtering and Surge Protection
Units of Measurement and interpretation of results
Introducing a planned maintenance system.
User Checks.
Formal Visual Inspections.
The 'Essential' Electrical Tests.
One and Two Day Pat Testing Training Course available with 2 Years Ongoing Assistance if required - Duty Holder Training & Bespoke PAT Testing Starter Kits. We can come to YOUR Workplace

PRACTICAL Assessment
PRACTICAL: Formal Visual Inspection
PRACTICAL: Earth Bond Resistance Testing
PRACTICAL: Insulation Resistance Testing @500VDC and 250VDC
PRACTICAL: Combined Inspection & Electrical Testing of Extension Leads
PRACTICAL: Polarity Testing
PRACTICAL: Electrical Testing of Surge Protected Devices and Sensitive I.T Equipment.
PRACTICAL : Portable 30mA RCD Trip Time Test
PRACTICAL: Electrical Testing of Current Leakage
PRACTICAL: Demonstrate the ability to use technical discretion over pre set instrument parameters.
We deliver Workplace PAT Testing Courses across most of the UK to assist businesses with Compliance. We also work with Bridges into Work and ReACT in association with Careers Wales and the Welsh Government to offer work based skills which some Candidates could be eligible for Government funding.


Fully Funded Training

Please use diligence when sourcing training providers online you should be cautious of Online Courses and DVD's.


The Health and Safety Executive advise competence at two levels (Guidance Notes HSG107)


49) Combined inspection and testing requires a greater degree of competence (in terms of knowledge, training and experience) than for inspection alone, because appropriate electrical knowledge is needed to undertake the tests and interpret the test results. However, it can often be carried out by a competent employee.


50) People testing portable electrical equipment should be appropriately trained.
It is the employer’s duty to make sure that they are competent for the work they are to carry out.




Level 1: requires no interpretation of results and limited to simple Pass/fail test instrument. (Simple Pass/fail instruments may fail some appliances unnecessarily where higher earth readings are present by design or mains filtered)


Level 2: requires the user to have the ability 'competence' to interpret test results by using a machine that displays individual results.
We provide sufficient, accredited training at Level 2 so that a Duty Holder is able to make informed decisions on frequencies for inspecting and testing their workplace electrical appliances in accordance with HSE Guidance and the IET Code of Practice for In-service Inspection and Testing of Electrical Equipment.












Worksafepat Ltd

Pat Test

We deliver Workplace PAT Testing Courses across most of the UK to assist businesses with Compliance. We also work with Bridges into Work and ReACT in association with Careers Wales and the Welsh Government to offer work based skills which some Candidates could be eligible for Government funding.

Level 2 PAT Testing Training Course - CPD Accredited

We can come to you!

Nottinghamshire

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Overview</h2>This course is aimed at candidates that require the knowledge and practical skills to prepare, attach, guide and move suspended loads using a range of lifting accessories. It will enable the candidate to carry out their duties while complying with LOLER regulations.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Course Content</h2>Candidates will be able to:<ul style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><li fr-original-style="" style="box-sizing: border-box;">Understand the industry, the dangers of working in the industry and their responsibilities as a Slinger Signaller</li><li fr-original-style="" style="box-sizing: border-box;">Conform to relevant regulations, legislation and manufacturers requirements as per technical data</li><li fr-original-style="" style="box-sizing: border-box;">Locate, identify and explain different types of lifting equipment and lifting accessories.</li><li fr-original-style="" style="box-sizing: border-box;">Explain their basic construction, uses, applications and their functions</li><li fr-original-style="" style="box-sizing: border-box;">Interpret and extract information on all relevant documentation</li><li fr-original-style="" style="box-sizing: border-box;">Undertake all pre-use checks on non-specialist lifting accessories and identify non-serviceable items</li><li fr-original-style="" style="box-sizing: border-box;">Explain procedures for placing non-serviceable items out-of-service</li><li fr-original-style="" style="box-sizing: border-box;">Identify and explain centres of gravity and calculate estimated weights of loads</li><li fr-original-style="" style="box-sizing: border-box;">Set up exclusion zones explaining actions required for emergency actions and identifying any overhead hazards</li><li fr-original-style="" style="box-sizing: border-box;">Identify and maintain PPE appropriate for Slinger Signaller use</li><li fr-original-style="" style="box-sizing: border-box;">Secure various types of loads to a hook using the relevant lifting accessories and procedures ensuring load balance, security and integrity</li><li fr-original-style="" style="box-sizing: border-box;">Direct and guide the movement of loads to different types of location using different methods of communication</li><li fr-original-style="" style="box-sizing: border-box;">Understand environmental considerations</li><li fr-original-style="" style="box-sizing: border-box;">Carry out all out-of service and securing procedures</li></ul><h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Entry Requirements</h2>NPORS CSCS &ndash; Candidates must have achieved the relevant CITB Health, Safety &amp; Environment (HS&amp;E) touch-screen-test within 2 years.Good understanding of spoken and written English.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Duration</h2>Novice course &ndash; 2 DaysExperienced Worker Tests- 1 Day theory and practical assessment<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Location</h2>Customer Site (Training &amp; Testing) &ndash; Site must adhere to NPORS specifications

Overview
This course is aimed at candidates that require the knowledge and practical skills to prepare, attach, guide and move suspended loads using a range of lifting accessories. It will enable the candidate to carry out their duties while complying with LOLER regulations.
Course Content
Candidates will be able to:
Understand the industry, the dangers of working in the industry and their responsibilities as a Slinger Signaller
Conform to relevant regulations, legislation and manufacturers requirements as per technical data
Locate, identify and explain different types of lifting equipment and lifting accessories.
Explain their basic construction, uses, applications and their functions
Interpret and extract information on all relevant documentation
Undertake all pre-use checks on non-specialist lifting accessories and identify non-serviceable items
Explain procedures for placing non-serviceable items out-of-service
Identify and explain centres of gravity and calculate estimated weights of loads
Set up exclusion zones explaining actions required for emergency actions and identifying any overhead hazards
Identify and maintain PPE appropriate for Slinger Signaller use
Secure various types of loads to a hook using the relevant lifting accessories and procedures ensuring load balance, security and integrity
Direct and guide the movement of loads to different types of location using different methods of communication
Understand environmental considerations
Carry out all out-of service and securing procedures
Entry Requirements
NPORS CSCS – Candidates must have achieved the relevant CITB Health, Safety & Environment (HS&E) touch-screen-test within 2 years.
Good understanding of spoken and written English.
Duration
Novice course – 2 Days
Experienced Worker Tests- 1 Day theory and practical assessment
Location
Customer Site (Training & Testing) – Site must adhere to NPORS specifications

Dynamic Training and Assessments Ltd

Construction

CSCS (Construction Skills Certification Scheme)

NPORS

NPORS Slinger / Signaller (N402)

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Overview</h2>This course is aimed at candidates that require the knowledge and practical skills to operate dozers safely and efficiently.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Course Content</h2>Candidates will be able to:<ul style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><li fr-original-style="" style="box-sizing: border-box;">Understand the industry, the dangers of working in the industry and their responsibilities as an operator</li><li fr-original-style="" style="box-sizing: border-box;">Understand the manufacturer&rsquo;s handbook for the particular machine to be used</li><li fr-original-style="" style="box-sizing: border-box;">Locate and identify the major components of the machine and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Locate and identify key controls and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all pre-operational checks in accordance with manufacturer&rsquo;s and legislative requirements</li><li fr-original-style="" style="box-sizing: border-box;">Identify and maintain PPE appropriate for dozer use</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all necessary safety checks at the work area</li><li fr-original-style="" style="box-sizing: border-box;">Prepare the dozer for use, operate machinery safely and efficiently</li><li fr-original-style="" style="box-sizing: border-box;">Attach and set trailed, mounted attachments ready for work</li><li fr-original-style="" style="box-sizing: border-box;">Understand environmental considerations</li><li fr-original-style="" style="box-sizing: border-box;">Storage and transport of implements and attachments</li><li fr-original-style="" style="box-sizing: border-box;">Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation</li><li fr-original-style="" style="box-sizing: border-box;">Carry out all end of shift and shut down procedures</li></ul><h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Entry Requirements</h2>NPORS CSCS &ndash; Candidates must have achieved the relevant CITB Health, Safety &amp; Environment (HS&amp;E) touch-screen-test within 2 years.Good understanding of spoken and written English.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Duration</h2>Novice course &ndash; 10 Days depending upon experienceExperienced worker tests &ndash; 1 day theory and practical assessment<div style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><h2 fr-original-style="" style="box-sizing: border-box;">Location</h2></div>Customer Site (Training &amp; Testing) &ndash; Site must adhere to NPORS specifications

Overview
This course is aimed at candidates that require the knowledge and practical skills to operate dozers safely and efficiently.
Course Content
Candidates will be able to:
Understand the industry, the dangers of working in the industry and their responsibilities as an operator
Understand the manufacturer’s handbook for the particular machine to be used
Locate and identify the major components of the machine and explain their functions
Locate and identify key controls and explain their functions
Conduct all pre-operational checks in accordance with manufacturer’s and legislative requirements
Identify and maintain PPE appropriate for dozer use
Conduct all necessary safety checks at the work area
Prepare the dozer for use, operate machinery safely and efficiently
Attach and set trailed, mounted attachments ready for work
Understand environmental considerations
Storage and transport of implements and attachments
Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation
Carry out all end of shift and shut down procedures
Entry Requirements
NPORS CSCS – Candidates must have achieved the relevant CITB Health, Safety & Environment (HS&E) touch-screen-test within 2 years.
Good understanding of spoken and written English.
Duration
Novice course – 10 Days depending upon experience
Experienced worker tests – 1 day theory and practical assessment
Location
Customer Site (Training & Testing) – Site must adhere to NPORS specifications

NPORS Dozer (N215)

COURSE INFORMATION<div style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">This course teaches you how to operate a mini / compact crane safely and productively.We will conduct a learner analysis to identify the duration of training required for those with limited or no experience, whereas experienced operators can attend a one day Experienced Worker Assessment (Test Only).To provide knowledge and understanding in the following areas:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operator</li><li fr-original-style="" style="box-sizing: border-box;">Have a working knowledge of the manufacturer&rsquo;s handbook for the particular machine to be used</li><li fr-original-style="" style="box-sizing: border-box;">Be able to locate and identify the major components of the machine and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Be able to locate and identify key controls and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Set up exclusion zone</li><li fr-original-style="" style="box-sizing: border-box;">Identify and maintain PPE appropriate for mini compact crane use</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all pre-operational and running checks in accordance with manufacturer&rsquo;s and legislative requirements</li><li fr-original-style="" style="box-sizing: border-box;">Prepare the mini compact crane for use and operate machine safely and efficiently</li><li fr-original-style="" style="box-sizing: border-box;">Environmental considerations</li><li fr-original-style="" style="box-sizing: border-box;">Carry out all end of work and shut down procedures</li></ul><h2 fr-original-style="" style="box-sizing: border-box;">Entry Requirements</h2>Please note, that in all cases, operators are required to supply proof to support&nbsp;their application. They have to have passed the CITB health, safety &amp; environmental touch screen test within two years prior to their application.Good understanding of spoken and written English.</div>

COURSE INFORMATION
This course teaches you how to operate a mini / compact crane safely and productively.
We will conduct a learner analysis to identify the duration of training required for those with limited or no experience, whereas experienced operators can attend a one day Experienced Worker Assessment (Test Only).
To provide knowledge and understanding in the following areas:
Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operator
Have a working knowledge of the manufacturer’s handbook for the particular machine to be used
Be able to locate and identify the major components of the machine and explain their functions
Be able to locate and identify key controls and explain their functions
Set up exclusion zone
Identify and maintain PPE appropriate for mini compact crane use
Conduct all pre-operational and running checks in accordance with manufacturer’s and legislative requirements
Prepare the mini compact crane for use and operate machine safely and efficiently
Environmental considerations
Carry out all end of work and shut down procedures
Entry Requirements
Please note, that in all cases, operators are required to supply proof to support their application. They have to have passed the CITB health, safety & environmental touch screen test within two years prior to their application.
Good understanding of spoken and written English.

NPORS Compact Crane (N140)

COURSE INFORMATION<div style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">To provide knowledge and understanding in the following areas:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Have a basic understanding of the industry and the relevant legislation, the dangers of working in the industry and their responsibilities as a vehicle marshal</li><li fr-original-style="" style="box-sizing: border-box;">Have knowledge of the manufacturer&rsquo;s handbook for the particular vehicle / machine to be guided</li><li fr-original-style="" style="box-sizing: border-box;">Have a good understanding of signs and signals, approved hand signals and different forms of communication</li><li fr-original-style="" style="box-sizing: border-box;">Identify and maintain PPE appropriate for vehicle marshal duties</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all necessary safety checks at the work area including stop blocks and tipping areas</li><li fr-original-style="" style="box-sizing: border-box;">Set up exclusion zone for unloading</li><li fr-original-style="" style="box-sizing: border-box;">Guide machinery in a forward and reverse direction including confined spaces and &ldquo;blind areas&rdquo; safely and efficiently</li><li fr-original-style="" style="box-sizing: border-box;">Environmental considerations</li><li fr-original-style="" style="box-sizing: border-box;">Carry out all end of shift and shut down and parking procedures</li></ul><h2 fr-original-style="" style="box-sizing: border-box;">Entry Requirements</h2>Please note, that in all cases, operators are required to supply proof to support&nbsp;their application. They have to have passed the CITB health, safety &amp; environmental touch screen test within two years prior to their application.Good understanding of spoken and written English.</div>

COURSE INFORMATION
To provide knowledge and understanding in the following areas:
Have a basic understanding of the industry and the relevant legislation, the dangers of working in the industry and their responsibilities as a vehicle marshal
Have knowledge of the manufacturer’s handbook for the particular vehicle / machine to be guided
Have a good understanding of signs and signals, approved hand signals and different forms of communication
Identify and maintain PPE appropriate for vehicle marshal duties
Conduct all necessary safety checks at the work area including stop blocks and tipping areas
Set up exclusion zone for unloading
Guide machinery in a forward and reverse direction including confined spaces and “blind areas” safely and efficiently
Environmental considerations
Carry out all end of shift and shut down and parking procedures
Entry Requirements
Please note, that in all cases, operators are required to supply proof to support their application. They have to have passed the CITB health, safety & environmental touch screen test within two years prior to their application.
Good understanding of spoken and written English.

NPORS Vehicle Marshal (N403)

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Who Should Attend</h2>This course is aimed at candidates that require the knowledge and practical skills operate Rear Tipping Dumpers to transport and discharge loads. This course can be completed by both novice and experienced candidates. We also offer refresher tests.Novice course- 4 DaysExperienced worker tests- 1 day theory and practical assessment<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Course information</h2>Category N205It is envisaged that by the end of this course of training the learner will be able to answer questions on and perform the following: ➢ Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operator ➢ Have a working knowledge of the manufacturer&rsquo;s handbook for the particular machine to be used ➢ Be able to locate and identify the major components of the machine and explain their functions ➢ Be able to locate and identify key controls and explain their functions ➢ Conduct all pre-operational checks in accordance with manufacturer&rsquo;s and legislative requirements ➢ Identify and maintain PPE appropriate for rear tipping dumper use ➢ Conduct all necessary safety checks at the work area ➢ Prepare the rear tipping dumper for use &amp; operate machinery safely and efficiently ➢ Environmental considerations ➢ Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation ➢ Carry out all end of shift and shut down procedures<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Assessment</h2>Assessment will be to NPORS standards consisting of a theory test and practical test.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Certification</h2>NPORS Traditional card &ndash; With the traditional card there is no requirements to complete an NVQ, a five year card is issued and after five years reassessment is required.NPORS CSCS &ndash; To ensure that the operator is able to receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant.

Who Should Attend
This course is aimed at candidates that require the knowledge and practical skills operate Rear Tipping Dumpers to transport and discharge loads. This course can be completed by both novice and experienced candidates. We also offer refresher tests.
Novice course- 4 Days
Experienced worker tests- 1 day theory and practical assessment
Course information
Category N205

It is envisaged that by the end of this course of training the learner will be able to answer questions on and perform the following:
➢ Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operator
➢ Have a working knowledge of the manufacturer’s handbook for the particular machine to be used
➢ Be able to locate and identify the major components of the machine and explain their functions
➢ Be able to locate and identify key controls and explain their functions
➢ Conduct all pre-operational checks in accordance with manufacturer’s and legislative
requirements
➢ Identify and maintain PPE appropriate for rear tipping dumper use
➢ Conduct all necessary safety checks at the work area
➢ Prepare the rear tipping dumper for use & operate machinery safely and efficiently
➢ Environmental considerations
➢ Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation
➢ Carry out all end of shift and shut down procedures
Assessment
Assessment will be to NPORS standards consisting of a theory test and practical test.
Certification
NPORS Traditional card – With the traditional card there is no requirements to complete an NVQ, a five year card is issued and after five years reassessment is required.
NPORS CSCS – To ensure that the operator is able to receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant.

NPORS Rear Tipping Dumper (N205)

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Who Should Attend</h2>This course is aimed at candidates that require the knowledge and practical skills operate Road Rollers to compact a variety of ground. This course can be completed by both novice and experienced candidates. We also offer refresher tests.Novice course- 3 DaysExperienced worker tests- 1 day theory and practical assessment<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Course information</h2>Category 214 Road RollerIt is envisaged that by the end of this course of training the learner will be able to answer questions on and perform the following: ➢ Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operator ➢ Have a working knowledge of the manufacturer&rsquo;s handbook for the particular machine to be used ➢ Be able to locate and identify the major components of the machine and explain their functions ➢ Be able to locate and identify key controls and explain their functions ➢ Conduct all pre-operational checks in accordance with manufacturer&rsquo;s and legislative requirements ➢ Identify and maintain PPE appropriate for roller use ➢ Prepare the roller for use and operate machinery safely and efficiently ➢ Conduct all necessary safety checks at the work area ➢ Operate machinery safely and efficiently ➢ Environmental considerations ➢ Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation ➢ Carry out all end of shift and shut down procedures<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Assessment</h2>Assessment will be to NPORS standards consisting of a theory test and practical test.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Certification</h2>NPORS Traditional card &ndash; With the traditional card there is no requirements to complete an NVQ, a five year card is issued and after five years reassessment is required.NPORS CSCS &ndash; To ensure that the operator is able to receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant.

Who Should Attend
This course is aimed at candidates that require the knowledge and practical skills operate Road Rollers to compact a variety of ground. This course can be completed by both novice and experienced candidates. We also offer refresher tests.
Novice course- 3 Days
Experienced worker tests- 1 day theory and practical assessment
Course information
Category 214 Road Roller
It is envisaged that by the end of this course of training the learner will be able to answer questions on and perform the following:
➢ Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operator
➢ Have a working knowledge of the manufacturer’s handbook for the particular machine to be used
➢ Be able to locate and identify the major components of the machine and explain their functions
➢ Be able to locate and identify key controls and explain their functions
➢ Conduct all pre-operational checks in accordance with manufacturer’s and legislative
requirements
➢ Identify and maintain PPE appropriate for roller use
➢ Prepare the roller for use and operate machinery safely and efficiently
➢ Conduct all necessary safety checks at the work area
➢ Operate machinery safely and efficiently
➢ Environmental considerations
➢ Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation
➢ Carry out all end of shift and shut down procedures
Assessment
Assessment will be to NPORS standards consisting of a theory test and practical test.
Certification
NPORS Traditional card – With the traditional card there is no requirements to complete an NVQ, a five year card is issued and after five years reassessment is required.
NPORS CSCS – To ensure that the operator is able to receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant.

NPORS Road Roller (N214)

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Who Should Attend</h2>This course is aimed at candidates that require the knowledge to enable them to know correct use of harness and fall arrest equipment, ACOP, regulations and risks associated with not wearing fall arrest equipment.&nbsp;This course can be completed by both novice and experienced candidates.Novice course- 1/2 DayExperienced worker tests- 1/2 day theory assessment.COURSE INFORMATIONTo provide knowledge and understanding in the following areas:<ul style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);"><li fr-original-style="" style="box-sizing: border-box;">Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities</li><li fr-original-style="" style="box-sizing: border-box;">Have a working knowledge of the manufacturer&#39;s handbook for the particular harness / fall arrest to be used</li><li fr-original-style="" style="box-sizing: border-box;">Be able to locate and identify major components of the harness / fall arrest and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all safety checks in accordance with the manufacturer&#39;s and legislative requirements</li><li fr-original-style="" style="box-sizing: border-box;">Select suitable type of harness / fall arrest relative to the work being undertaken</li><li fr-original-style="" style="box-sizing: border-box;">Identify and maintain PPE appropriate for using harness / fall arrest and demonstrate correct use</li><li fr-original-style="" style="box-sizing: border-box;">Correctly fit and remove the safety harness / fall arrest</li><li fr-original-style="" style="box-sizing: border-box;">Carry out end of work inspections</li><li fr-original-style="" style="box-sizing: border-box;">Environmental considerations</li><li fr-original-style="" style="box-sizing: border-box;">Storage of harness / fall arrest</li></ul><h2 style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">Entry Requirements</h2>Please note, that in all cases, operators are required to supply proof to support&nbsp;their application. They have to have passed the CITB health, safety &amp; environmental touch screen test within two years prior to their application.Good understanding of spoken and written English.

Who Should Attend
This course is aimed at candidates that require the knowledge to enable them to know correct use of harness and fall arrest equipment, ACOP, regulations and risks associated with not wearing fall arrest equipment.
 This course can be completed by both novice and experienced candidates.
Novice course- 1/2 Day
Experienced worker tests- 1/2 day theory assessment.
COURSE INFORMATION
To provide knowledge and understanding in the following areas:
Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities
Have a working knowledge of the manufacturer's handbook for the particular harness / fall arrest to be used
Be able to locate and identify major components of the harness / fall arrest and explain their functions
Conduct all safety checks in accordance with the manufacturer's and legislative requirements
Select suitable type of harness / fall arrest relative to the work being undertaken
Identify and maintain PPE appropriate for using harness / fall arrest and demonstrate correct use
Correctly fit and remove the safety harness / fall arrest
Carry out end of work inspections
Environmental considerations
Storage of harness / fall arrest
Entry Requirements
Please note, that in all cases, operators are required to supply proof to support their application. They have to have passed the CITB health, safety & environmental touch screen test within two years prior to their application.
Good understanding of spoken and written English.

NPORS Harness and Fall Arrest (N723)

Who should attend&nbsp;This course is aimed at people who require the knowledge and practical skills needed to enable them to safely operate and maintain a Multi Directional Lift Truck. We will conduct a learner analysis to identify the duration of training required for those with limited or no experience, whereas experienced operators can attend a one day Experienced Worker Assessment (Test Only).&nbsp;Course information Overview&nbsp;To provide knowledge and understanding in the following areas:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">&nbsp;Have a basic understanding of the industry, the dangers of working in the industry and their &nbsp;responsibilities as a plant operator</li><li fr-original-style="" style="box-sizing: border-box;">&nbsp;Have a working knowledge of the manufacturer&rsquo;s handbook for the particular machine to be &nbsp;used&nbsp;</li><li fr-original-style="" style="box-sizing: border-box;">Be able to locate and identify the major components of the machine and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;"> Be able to locate and identify driving, steering and braking controls in each travel mode and &nbsp;explain their functions</li><li fr-original-style="" style="box-sizing: border-box;"> Conduct all pre-operational checks in accordance with manufacturer&rsquo;s and legislative &nbsp;requirements&nbsp;</li><li fr-original-style="" style="box-sizing: border-box;">Safely mount and dismount the machine</li><li fr-original-style="" style="box-sizing: border-box;">&nbsp;Start and stop the engine and safely move the machine off and stop it safely in each travel mode</li><li fr-original-style="" style="box-sizing: border-box;"> Configure the machine for travel and maneuver it safely laden and unladen, in open and &nbsp;confined areas in each travel mode</li><li fr-original-style="" style="box-sizing: border-box;"> Conduct all necessary safety checks at the work area&nbsp;</li><li fr-original-style="" style="box-sizing: border-box;">Maneuver the machine to the work area and correctly configure in readiness to carry out &nbsp;lifting and load handling tasks using each travel mode as appropriate</li><li fr-original-style="" style="box-sizing: border-box;">&nbsp;Carry out lifting and load handling tasks</li><li fr-original-style="" style="box-sizing: border-box;"> Lift and transfer loads accurately and safely at different locations</li><li fr-original-style="" style="box-sizing: border-box;"> Load and unload external transport safely&nbsp;</li><li fr-original-style="" style="box-sizing: border-box;">Fit, adjust and or remove attachments</li><li fr-original-style="" style="box-sizing: border-box;"> Demonstrate knowledge and understanding of loading and unloading procedures for machine &nbsp;transportation&nbsp;</li><li fr-original-style="" style="box-sizing: border-box;">Carry out all end of shift and shut down procedures&nbsp;</li></ul>Entry Requirements&nbsp;For learners applying for the NPORS CSCS Card, or for those requiring the &#39;HS&amp;E TESTED Logo&#39; displayed on their card they must have passed the CITB Operatives Health, Safety and Environment Test within the last 2 years. Good understanding of spoken and written English. Assessment NPORS Theory assessment made up of open questions and multiple choice. NPORS Practical assessment.

Who should attend
 This course is aimed at people who require the knowledge and practical skills needed to enable them to safely operate and maintain a Multi Directional Lift Truck. We will conduct a learner analysis to identify the duration of training required for those with limited or no experience, whereas experienced operators can attend a one day Experienced Worker Assessment (Test Only).
 Course information Overview
 To provide knowledge and understanding in the following areas:
Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as a plant operator
Have a working knowledge of the manufacturer’s handbook for the particular machine to be used
Be able to locate and identify the major components of the machine and explain their functions
Be able to locate and identify driving, steering and braking controls in each travel mode and explain their functions
Conduct all pre-operational checks in accordance with manufacturer’s and legislative requirements
Safely mount and dismount the machine
Start and stop the engine and safely move the machine off and stop it safely in each travel mode
Configure the machine for travel and maneuver it safely laden and unladen, in open and confined areas in each travel mode
Conduct all necessary safety checks at the work area
Maneuver the machine to the work area and correctly configure in readiness to carry out lifting and load handling tasks using each travel mode as appropriate
Carry out lifting and load handling tasks
Lift and transfer loads accurately and safely at different locations
Load and unload external transport safely
Fit, adjust and or remove attachments
Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation
Carry out all end of shift and shut down procedures
Entry Requirements 
For learners applying for the NPORS CSCS Card, or for those requiring the 'HS&E TESTED Logo' displayed on their card they must have passed the CITB Operatives Health, Safety and Environment Test within the last 2 years. Good understanding of spoken and written English. Assessment NPORS Theory assessment made up of open questions and multiple choice. NPORS Practical assessment.

NPORS Multi Directional Lift Truck (N135)

Southampton

Rotherham

Manchester

Leeds

Kingston upon Hull

Newport

Peterborough

Milton Keynes 

Dartford

Paisley

Derby

Birmingham

Hull

Bedford

Liverpool 

Swansea

<div data-testid="richTextElement" style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);">ONLINE STUDY - In your own time (approx. 6 hours study time) +CLASSROOM SESSION - Morning, Afternoon or Evening session (approx. 3 hours) Awarding Body:&nbsp;Open College Network (OCN) Credit for LearningAward Level:&nbsp;Level 3 (Advanced Level) - Ireland Level 5CPD Certified:&nbsp;Yes (CPD Accreditation)Minimum Age:&nbsp;18 (16 with parental consent)Entry requirements:&nbsp;None. (English Level 2 desirable)Training Locations:&nbsp;Study online + Classroom&nbsp;OCN Accredited at UK Level 3 (Ireland Level 5) &nbsp;PART 1 - Theory:&nbsp;Complete this part of your course online at home or work in your own time (stop and start learning when it suits you). Can be completed on multiple devices - smart phones, kindle, laptop, tablet etc. PART 2 - Skills and Practical Development: Safely and competently set up and maintain a Peripheral IV Infusion. Attend a classroom location to complete your practical training. <div style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);"> Please make sure you verify the precise dates and timings of your course when you receive your booking confirmation, as it may vary from the information provided above. </div><div style="color: rgb(85, 85, 85); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);">Course Itinerary:</div><div style="color: rgb(85, 85, 85); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"> </div>PART 1 - THEORY (ONLINE) M1 - Peripheral IV Cannulation - Introduction: Definitions - understanding terminology relating to PIVC. IV Therapy and NMC guidelines. M2 - Legal &amp; Professional Responsibilities: Legal Obligations and Accountability. Criminal, Civil and Contractual law in Healthcare. Vicarious Liability and your Duty of Care. M3 - Anatomy &amp; Physiology: Sites appropriate to IV cannulation. Hand vs. arm. Advantages and disadvantages of relevant veins. An overview of Homeostasis and Fluid Balance. M4 - Hygiene and Infection Prevention &amp; Control (IPC): Reducing healthcare-associated infections. Keeping Safe. Bloodborne Pathogens and Work Practice Controls. Standard Precautions. Waste Disposal. Needle-stick injuries. M5 - Indications and Advantages: When to cannulate, infusion types and benefits over alternative infusion routes. Continuous and intermittent infusion. Prophylactic use before procedures and in unstable patients. Contraindications. M6 - Equipment: Cannula types, sizes and colour coding. How to select appropriate size. Equipment overview for total procedure. M7 - Vein Choice for Cannulation: Correct vein selection. Which veins to avoid. How to manage an unsuccessful cannulation. M8 - Procedures: Full procedure for cannulation including correct documentation. M8: Guide to Cannulation - revision M8: Video - Recap with full procedure M9 - Contraindications: When inappropriate to cannulate including patients with specific health conditions. M10 - Complications: A detailed look at potential complications during and after cannulation, including phlebitis, infections, petechiae and haematomas. Clinical signs and corrective actions. PLEASE NOTE THAT PART 1 SHOULD BE COMPLETED BEFORE JOINING US FOR YOUR PRACTICAL TRAINING PART 2 (CLASSROOM: 1 - Welcome, introductions and overview: Classroom - registration and introductions. Virtual Classroom - audio/visual checks and registration. 2 - Legal &amp; Professional Responsibilities: Overview and discussion. 3 - Anatomy - key points (appropriate to PIVC): Arteries and veins. Selecting an approprate site. Sites to avoid and &ldquo;first choice&rdquo; sites. 4 - Cannulae - selection and types: A detailed look at different types of cannulas, respective benefits and attributes. Selectinng an appropriate pVAD. 5 - Complications: Complications of pVAD insertion including examples of infiltration, haematoma, extravasation and transfixation. 6 - VIP Score: Understanding and using the Visual Infusion Phlebitis score. 7 - Equipment - overview: We take a look at all essential equipment required for PIVC. 8 - PRACTICAL SESSIONS: Multiple practical sessions throughout the session. 9 - Fluids: The importance of understanding fluids. Includes detailed overview of: maintenance fluids, Hartmann&rsquo;s solution, Colloids (and risks), blood products. 10 - Infusion Rates: Calculating infusion rates and drops per minute. This course is supported with downloadable resources and may include extra video segments to reinforce your practical training.&nbsp;<div style="color: rgb(85, 85, 85); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);">(THE COURSE DELIVERY AWARDS SAME NATIONALLY RECOGNISED AND DUALLY ACCREDITED QUALIFICATION AS OUR VIRTUAL CLASSROOM COURSE VERSION)</div></div>

ONLINE STUDY - In your own time (approx. 6 hours study time) +
CLASSROOM SESSION - Morning, Afternoon or Evening session (approx. 3 hours)



Awarding Body: Open College Network (OCN) Credit for Learning
Award Level: Level 3 (Advanced Level) - Ireland Level 5
CPD Certified: Yes (CPD Accreditation)
Minimum Age: 18 (16 with parental consent)
Entry requirements: None. (English Level 2 desirable)
Training Locations: Study online + Classroom
 
OCN Accredited at UK Level 3 (Ireland Level 5)

 
PART 1 - Theory: Complete this part of your course online at home or work in your own time (stop and start learning when it suits you). Can be completed on multiple devices - smart phones, kindle, laptop, tablet etc.

PART 2 - Skills and Practical Development:
Safely and competently set up and maintain a Peripheral IV Infusion.


Attend a classroom location to complete your practical training.


Please make sure you verify the precise dates and timings of your course when you receive your booking confirmation, as it may vary from the information provided above.


Course Itinerary:
PART 1 - THEORY (ONLINE)
M1 - Peripheral IV Cannulation - Introduction:
Definitions - understanding terminology relating to PIVC.
IV Therapy and NMC guidelines.
M2 - Legal & Professional Responsibilities:
Legal Obligations and Accountability. Criminal, Civil and
Contractual law in Healthcare. Vicarious Liability and your
Duty of Care.
M3 - Anatomy & Physiology:
Sites appropriate to IV cannulation. Hand vs. arm.
Advantages and disadvantages of relevant veins.
An overview of Homeostasis and Fluid Balance.
M4 - Hygiene and Infection Prevention & Control (IPC):
Reducing healthcare-associated infections. Keeping Safe.
Bloodborne Pathogens and Work Practice Controls.
Standard Precautions. Waste Disposal. Needle-stick injuries.
M5 - Indications and Advantages:
When to cannulate, infusion types and benefits over
alternative infusion routes. Continuous and intermittent infusion.
Prophylactic use before procedures and in unstable patients.
Contraindications.
M6 - Equipment:
Cannula types, sizes and colour coding. How to select
appropriate size. Equipment overview for total procedure.
M7 - Vein Choice for Cannulation:
Correct vein selection. Which veins to avoid.
How to manage an unsuccessful cannulation.
M8 - Procedures:
Full procedure for cannulation including correct documentation.
M8: Guide to Cannulation - revision
M8: Video - Recap with full procedure
M9 - Contraindications:
When inappropriate to cannulate including patients with specific health conditions.
M10 - Complications:
A detailed look at potential complications during and after
cannulation, including phlebitis, infections, petechiae and haematomas. Clinical signs and corrective actions.

PLEASE NOTE THAT PART 1 SHOULD BE COMPLETED
BEFORE JOINING US FOR YOUR PRACTICAL TRAINING

PART 2 (CLASSROOM:
1 - Welcome, introductions and overview:
Classroom - registration and introductions.
Virtual Classroom - audio/visual checks and registration.
2 - Legal & Professional Responsibilities:
Overview and discussion.
3 - Anatomy - key points (appropriate to PIVC):
Arteries and veins. Selecting an approprate site. Sites to avoid and “first choice” sites.
4 - Cannulae - selection and types:
A detailed look at different types of cannulas, respective benefits and attributes. Selectinng an appropriate pVAD.
5 - Complications:
Complications of pVAD insertion including examples of
infiltration, haematoma, extravasation and transfixation.
6 - VIP Score:
Understanding and using the Visual Infusion Phlebitis score.
7 - Equipment - overview:
We take a look at all essential equipment required for PIVC.
8 - PRACTICAL SESSIONS:
Multiple practical sessions throughout the session.
9 - Fluids:
The importance of understanding fluids. Includes detailed overview of: maintenance fluids, Hartmann’s solution, Colloids (and risks), blood products.
10 - Infusion Rates:
Calculating infusion rates and drops per minute.

This course is supported with downloadable resources and may include extra video segments to reinforce your practical training.
 
(THE COURSE DELIVERY AWARDS SAME NATIONALLY RECOGNISED AND DUALLY ACCREDITED QUALIFICATION AS OUR VIRTUAL CLASSROOM COURSE VERSION)



Geopace Training

Allied Health Professions (AHP)

Intravenous Cannulation

Aesthetics

Medicine & Nursing

Venepuncture & Cannulation

Learn how to cannulate ...

    Nationally Recognised Qualification

    OCN Accredited - Level 3 (advanced) - Ireland Level 5

    CPD Accredited - The CPD Certification Service

    Classroom or Virtual Classroom options

    Covers all steps for cannulating in arm or hand

    Practise on artificial arms and fake blood!

    Essential qualification for all IV therapies

    Phlebotomy training desirable but not essential

    Basic understanding of English language required

    OPEN TO ALL APPLICANTS


Peripheral I.V. Cannulation Course (GPT008)

General Admission

For many aspiring influencers, the first question is always: how much TikTok pays for 1 million views? In 2025, thanks to the Creator Rewards Program, the payout is much higher than in the past. On average, TikTok pays between $400 and $1,000 for one million views. The exact amount depends on several factors, including video engagement, audience watch time, and the region where viewers are located.
Why Earnings Vary
Although the average range is clear, not all creators earn the same. A lifestyle or comedy clip might earn differently from a niche educational video, even with the same number of views. TikTok calculates rewards based on quality engagement, meaning longer watch times and meaningful interactions often translate into higher pay. This is why some creators might report $600 for a million views, while others earn closer to $1,000.
For more: https://litcommerce.com/blog/how-much-does-tiktok-pay/
From Creator Fund to Creator Rewards
A few years ago, the Creator Fund was heavily criticized for its low payouts. Many influencers claimed they made less than $50 for a million views, which discouraged serious content creation. But in late 2023, TikTok rolled out the Creator Rewards Program, offering more transparent and competitive rates. Now, when people ask how much TikTok pays for 1 million views, the answer is far more encouraging for those considering TikTok as a source of income.
Eligibility to Start Earning
To actually benefit from this system, creators must meet TikTok’s requirements:
Be at least 18 years old 
Have 10,000 or more followers 
Achieve 100,000 valid views in the last 30 days 
Reside in an eligible country such as the US, UK, France, Germany, Japan, South Korea, or Brazil 
Once approved, your videos become eligible for per-view earnings.
Beyond TikTok Payouts
While understanding how much TikTok pays for 1 million views is useful, smart creators rarely rely on this income alone. Other opportunities include TikTok Shop, brand partnerships, affiliate marketing, and livestream gifts. These often generate more consistent and higher earnings compared to view-based payouts alone.
Final Thoughts
So, how much TikTok pays for 1 million views in 2025? On average, between $400 and $1,000. This new pay structure makes TikTok a more reliable platform for creators who want to monetize their influence. However, the best strategy is to see per-view payouts as just one piece of the puzzle while combining them with multiple income streams for long-term financial success.
Our blog:
https://www.leetchi.com/fr/c/tiktokpay-5523953?utm_source=copylink&utm_medium=social_sharing
https://telegra.ph/From-Viral-to-Cash-How-Much-TikTok-Pays-for-1-Million-Views-08-18
https://www.ohay.tv/view/tiktok-pay-per-view-explained-what-every-creator-should-know/Y2B862ycS3
https://tiktokpay1.hashnode.space/default-guide/v1.0?t=1755515046856

TikTokPay

How Much TikTok Pays for 1 Million Views: The Viral Payday Explained

Portsmouth

Luton

Berkshire

Essex

ONLINE STUDY - In your own time (approx. 6 hours study time) +
CLASSROOM SESSION - Morning, Afternoon or Evening session (approx. 3 hours)



Awarding Body: Open College Network (OCN) Credit for Learning
Award Level: Level 4 (Foundation Degree Level) - Ireland Level 6
CPD Certified: Yes (CPD Accreditation)
Minimum Age: 18 (16 with parental consent)
Entry requirements: None. (English Level 2 desirable)
Training Locations: Study online + Classroom
 
OCN Accredited at UK Level 4 (Ireland Level 6)

 
PART 1 - Theory: Complete this part of your course online at home or work in your own time (stop and start learning when it suits you). Can be completed on multiple devices - smart phones, kindle, laptop, tablet etc.

PART 2 - Skills and Practical Development:
Covers advanced specialised phlebotomy techniques to give you the leading edge as a phlebotomist. Learn to use a wide range of non-routine equipment.


Attend a classroom location to complete your practical training.


Please make sure you verify the precise dates and timings of your course when you receive your booking confirmation, as it may vary from the information provided above.


Course Itinerary:
PART 1 - THEORY (ONLINE)
M00 - Introduction:
Learning outcomes, Assumptions and Overview.
M01 - Basic Phlebotomy - revision:
Recap of basic phlebotomy theory and practice - precursor to
the advanced course.
M02 - Aspirated and Vacuated Systems:
Open systems (Syringe & Needle), closed systems (Vacutainer & Monovette), Alternative closed systems, Using Monovette - aspiration and evacuated techniques, monovette adapter systems.
M03 - Specialised and Advanced Phlebotomy Equipment:
The centrifuge - overview. Safe operation and use. Managing a centrifuge breakage or spillage.
Equipment and practices in unusual situations.
Patients with special needs and requiring specific attention.
Equipment preparation for blood samples that are collected at
0 degrees, 37 degrees C and other non-standard conditions.
A look at advances in technology and how to use the latest devices.
M04 - Point of Care Testing:
What is POC Testing? Advantages, Disadvantages and Clinical
Outcomes. Comparison of POC with lab testing. 10 common POC tests. Roles for phlebotomists performing POC Tests.
M05 - Neonates and Children:
Sample collection from new-born to pre-adult. A detailed overview of legal principles of law including child consent and child protection for phlebotomists. Neonatal and child blood collection equipment.
A comprehensive look at heel and finger-prick procedures including
microtainers, lancets and capillary tube collection. Detailed heel prick procedure. Paediatric finger prick collection. The life-threatening hazard of over-collecting. Communication techniques in differing age bands.
Consent and the law. Basic principles of lawful consent for neonates and paediatric patients. Child protection.
Detailed analysis of neonatal and paediatric blood collection including Guthrie card collection. Neonatal bottles - colours and tests. Paediatric blood gases collection.
Butterfly needles - when to use. Blood tests during pregnancy. Neonatal blood screening - nine conditions covered. Bilirubin in neonates.
M06 - Geriatric Patients:
The challenges of phlebotomy in older people. Understanding skin changes and venepuncture implications. A profile of common
geriatric blood tests. Age related problems. Procedural precautions.
M07 - Special Procedures:
Drawing blood from back of hand. Drawing blood from lower limb veins. Managing the unwilling or difficult patient. Managing the psychiatric patient. Managing the isolated patient. Non-routine blood tests. Managing the latex allergy patient (type 1 and type 4 reactions). Latex indicators. Sample handling - non-routine procedures. Drug trials and research projects.
M08 - Special Tests and Sample Handling Procedures:
A look at sample collection at specific times of day and night,
samples that are protected from light, collected on ice and
collected at body temperature. Procedures for each group - collection notes, analytic time, optimal collection time and notes for each group.
M09 - Advanced Phlebotomy Tasks:
Additional procedures. Maintaining POC equipment. Stock control and stock rotation. Quality control. Data entry. Product evaluation. Training and competency evaluation.
M10 - Alternative Environments:
A step-by-step look at non-clinical phlebotomy environments including private testing, DEFRA, forensic and police, cord blood collection, DNA analysis, veterinary services, overseas and volunteering.

PLEASE NOTE THAT PART 1 SHOULD BE COMPLETED
BEFORE JOINING US FOR YOUR PRACTICAL TRAINING

PART 2 (CLASSROOM)
MORNING , AFTERNOON OR EVENING SESSION:

1 - Welcome, introductions and overview:
- Classroom - health & safety briefing, schedule overview.
- Virtual Classroom - audio/visual checks and registration. Unpacking and overview of your training kit.
2 - Syringe and Needle (open system): Correct use and applications.
3 - Monovette (open and closed systems):
Using the Monovette system in aspiration mode - correct use and applications.
Using the Monovette system in evacuated mode - correct use and applications.
4 - IR Vein Detector:
Demonstration of the IR vein detector for assisting in detection of difficult veins.
5 - Veins in back of hand:
Detecting suitable veins in the back of the hand.
6 - POC testing:
Point of Care Testing - use of glucose meter to demonstrate a typical POC test procedure. Correct use and overview of other POC test devices.
7 - Using lancets (finger collection)
We look at the correct use of lancets for POC testing and whole blood micro-collection.
8 - Using lancets (heel collection)
We look at the correct use of lancets for neonatal blood spot tests (Guthrie Test).
9 - Capillary collection
Using glass capillary tubes for micro-collection. Correct use and handling.
10 - Microtube collection
Correct use of BD Microtainers (and similar micro-collection bottles) - collection and handling.

This course is supported with downloadable resources and may include extra video segments to reinforce your practical training.
 
(THE COURSE DELIVERY AWARDS SAME NATIONALLY RECOGNISED AND DUALLY ACCREDITED QUALIFICATION AS OUR VIRTUAL CLASSROOM COURSE VERSION)



Allied Health

Blood Taking

Healthcare Workers

Venepuncture

Phlebotomist

Phlebotomy

Accredited Phlebotomy

Healthcare

The UK's first and only Level 4 qualification in Phlebotomy (equivalent to Ireland Level 6)

    FDSc (Foundation Degree Level) qualification

    Nationally Recognised certificate

    Dually accredited: Open College Network  and CPD

    Covers both aspirated and evacuated systems

    Covers specialised blood collection systems & methods

    Classroom or Virtual Classroom learning options

    Comprehensive Training Kit is provided when booking our Virtual Classroom option (yours to keep)

    Complete your training from beginner to advanced level

    This course either follows on from our Introduction to Phlebotomy Course  or can be combined with our introductory course as part of a course package (see below)

    Available to candidates who have completed (or are currently enrolled to complete) our Introduction to Phlebotomy Course or have previous phlebotomy practical experience.


Advanced Phlebotomy - Skills & Techniques (GPT005)

Sydney

Target Audience
This course is ideal for Managers and Leaders looking to build a more inclusive workforce, or anyone managing neurodivergent individuals. It is also suitable for HR and Diversity & Inclusion professionals.
Duration
1 Day
Course Overview
As workplaces evolve toward greater inclusivity, managers play a vital role in shaping environments where neurodivergent team members can succeed.

This course provides practical strategies and leadership confidence to support employees by helping them meet their needs more effectively according to their neurotype.

Participants will explore a range of neurodivergent profiles and learn how to adapt communication, adjust workflows, reduce workplace triggers, and advocate for a fairer and more inclusive culture.

This course is designed by highly qualified learning design experts, assisted and guided by a Doctoral & Masters level leadership team. Working closely with subject matter leaders with extensive domain experience, this course is built on sound scientific & academic rigour and applied real world experience.

Run in a cohort-based, activity-led format, it goes beyond theory to provide practical methods and frameworks that you can immediately apply in your workplace.

Course Objectives
Analyse how context and environment contribute to disabling barriers for neurodivergent individuals in the workplace
Design leadership strategies and workflows that enable neurodivergent employees to leverage their strengths and thrive
Implement practical adjustments and communication practices that support a neuroinclusive team environment
Facilitate team consultations to collaboratively reduce barriers and promote psychological safety without ‘othering’ neurodivergent employees

High Level Topics
Understanding Neurodivergence
Unlocking Strengths and Safety
Inclusive Leadership in Action
Building a Neuro-inclusive Culture


Emergent Learning

Neurodiversity

Inclusion

Disability Awareness

Diversity & Inclusion

As workplaces seek to become more deliberate in enabling inclusivity, managers play a vital role in shaping environments where neurodivergent team members can succeed. 


Managing Neurodivergence in the Workplace

London

Cognicert ISO 7101:2023 Healthcare Quality Lead Auditor CourseCertify by Cognicert Limited www.cognicert.comTraining Overview: The ISO 7101 Lead Auditor Course is designed to provide participants with the knowledge and skills required to lead audits of Healthcare Quality Management systems (HQMS) based on ISO 7101:2023. This comprehensive training program covers the principles, processes, and practices of auditing HQMS, focusing on key areas such as audit planning, conducting audits, reporting, and follow-up activities.ISO 7101 Healthcare Quality Management System Lead Auditor Course provides participants with the knowledge and skills necessary to lead audits of quality management systems within healthcare organizations. This comprehensive training program covers the principles, processes, and practices of auditing healthcare quality management systems, focusing on key standards and regulations applicable to the healthcare industry.Target Audience:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Healthcare Quality assurance managers and officers.</li><li fr-original-style="" style="box-sizing: border-box;">Internal auditors responsible for auditing HQMS within organizations.</li><li fr-original-style="" style="box-sizing: border-box;">Professionals seeking to become certified lead auditors for ISO 7101 audits.</li><li fr-original-style="" style="box-sizing: border-box;">Personnel involved in implementing and maintaining HQMS within organizations.</li></ul>Reference Standards:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">ISO 7101:2023 - Healthcare Quality Management systems - Requirements.</li><li fr-original-style="" style="box-sizing: border-box;">They will understand how to apply ISO 19011:2018 and ISO 17011:2017 principles to ensure effective auditing, conformity assessment, and continual improvement within the Artificial Intelligence industry.</li></ul>Objectives:By the end of the course, participants will be able to:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Understand the principles and requirements of ISO 7101:2023.</li><li fr-original-style="" style="box-sizing: border-box;">Interpret and apply the requirements of ISO 7101 during audit activities.</li><li fr-original-style="" style="box-sizing: border-box;">Plan and prepare for HQMS audits effectively, including developing audit programs and checklists.</li><li fr-original-style="" style="box-sizing: border-box;">Conduct HQMS audits in accordance with ISO 7101 requirements, including gathering evidence, interviewing personnel, and documenting findings.</li><li fr-original-style="" style="box-sizing: border-box;">Apply audit techniques and methodologies to identify nonconformities and areas for improvement.</li><li fr-original-style="" style="box-sizing: border-box;">Prepare audit reports and communicate findings to relevant stakeholders.</li><li fr-original-style="" style="box-sizing: border-box;">Understand the process for audit follow-up and verification of corrective actions.</li></ul>Learning Outcome: Upon completion of the course, participants will be able to lead and conduct audits of HQMS effectively, in line with the requirements of ISO 7101:2023. They will possess the necessary knowledge and skills to plan, execute, report on, and follow up audits, contributing to the continual improvement of organizational processes and systems.Course Content:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Introduction to ISO 7101:2023<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Overview of the standard</li><li fr-original-style="" style="box-sizing: border-box;">Key concepts and principles of Healthcare Quality Management</li></ul></li><li fr-original-style="" style="box-sizing: border-box;">Principles of Auditing According to ISO 19011<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Fundamental concepts of auditing</li><li fr-original-style="" style="box-sizing: border-box;">Roles and responsibilities of auditors</li><li fr-original-style="" style="box-sizing: border-box;">Ethical considerations in auditing</li></ul></li><li fr-original-style="" style="box-sizing: border-box;">Audit Planning and Preparation according to ISO 17021:2015<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Developing audit objectives and scope</li><li fr-original-style="" style="box-sizing: border-box;">Establishing audit criteria and methods</li><li fr-original-style="" style="box-sizing: border-box;">Creating audit programs and checklists</li></ul></li><li fr-original-style="" style="box-sizing: border-box;">Conducting Audits<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Techniques for gathering evidence</li><li fr-original-style="" style="box-sizing: border-box;">Interviewing skills and communication techniques</li><li fr-original-style="" style="box-sizing: border-box;">On-site audit activities and observations</li></ul></li><li fr-original-style="" style="box-sizing: border-box;">Audit Reporting<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Documentation of audit findings</li><li fr-original-style="" style="box-sizing: border-box;">Preparation of audit reports</li><li fr-original-style="" style="box-sizing: border-box;">Presentation of findings to management and stakeholders</li></ul></li><li fr-original-style="" style="box-sizing: border-box;">Audit Follow-up and Corrective Actions<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Verification of corrective actions</li><li fr-original-style="" style="box-sizing: border-box;">Monitoring and measuring audit performance</li><li fr-original-style="" style="box-sizing: border-box;">Continuous improvement of the audit process</li></ul></li><li fr-original-style="" style="box-sizing: border-box;">Case Studies and Practical Exercises<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Application of audit principles and techniques through hands-on exercises and real-world scenarios.</li></ul></li></ul>Duration: 5 days Training Methodologies<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Case Study</li><li fr-original-style="" style="box-sizing: border-box;">Individual Exercises</li><li fr-original-style="" style="box-sizing: border-box;">Role Play</li><li fr-original-style="" style="box-sizing: border-box;">Group Exercises</li><li fr-original-style="" style="box-sizing: border-box;">Group Presentation</li><li fr-original-style="" style="box-sizing: border-box;">Examination</li></ul>

Cognicert ISO 7101:2023 Healthcare Quality Lead Auditor Course
Certify by Cognicert Limited www.cognicert.com
Training Overview: The ISO 7101 Lead Auditor Course is designed to provide participants with the knowledge and skills required to lead audits of Healthcare Quality Management systems (HQMS) based on ISO 7101:2023. This comprehensive training program covers the principles, processes, and practices of auditing HQMS, focusing on key areas such as audit planning, conducting audits, reporting, and follow-up activities.
ISO 7101 Healthcare Quality Management System Lead Auditor Course provides participants with the knowledge and skills necessary to lead audits of quality management systems within healthcare organizations. This comprehensive training program covers the principles, processes, and practices of auditing healthcare quality management systems, focusing on key standards and regulations applicable to the healthcare industry.
Target Audience:
Healthcare Quality assurance managers and officers.
Internal auditors responsible for auditing HQMS within organizations.
Professionals seeking to become certified lead auditors for ISO 7101 audits.
Personnel involved in implementing and maintaining HQMS within organizations.
Reference Standards:
ISO 7101:2023 - Healthcare Quality Management systems - Requirements.
They will understand how to apply ISO 19011:2018 and ISO 17011:2017 principles to ensure effective auditing, conformity assessment, and continual improvement within the Artificial Intelligence industry.
Objectives:
By the end of the course, participants will be able to:
Understand the principles and requirements of ISO 7101:2023.
Interpret and apply the requirements of ISO 7101 during audit activities.
Plan and prepare for HQMS audits effectively, including developing audit programs and checklists.
Conduct HQMS audits in accordance with ISO 7101 requirements, including gathering evidence, interviewing personnel, and documenting findings.
Apply audit techniques and methodologies to identify nonconformities and areas for improvement.
Prepare audit reports and communicate findings to relevant stakeholders.
Understand the process for audit follow-up and verification of corrective actions.
Learning Outcome: Upon completion of the course, participants will be able to lead and conduct audits of HQMS effectively, in line with the requirements of ISO 7101:2023. They will possess the necessary knowledge and skills to plan, execute, report on, and follow up audits, contributing to the continual improvement of organizational processes and systems.
Course Content:
Introduction to ISO 7101:2023Overview of the standardKey concepts and principles of Healthcare Quality Management
Principles of Auditing According to ISO 19011Fundamental concepts of auditingRoles and responsibilities of auditorsEthical considerations in auditing
Audit Planning and Preparation according to ISO 17021:2015Developing audit objectives and scopeEstablishing audit criteria and methodsCreating audit programs and checklists
Conducting AuditsTechniques for gathering evidenceInterviewing skills and communication techniquesOn-site audit activities and observations
Audit ReportingDocumentation of audit findingsPreparation of audit reportsPresentation of findings to management and stakeholders
Audit Follow-up and Corrective ActionsVerification of corrective actionsMonitoring and measuring audit performanceContinuous improvement of the audit process
Case Studies and Practical ExercisesApplication of audit principles and techniques through hands-on exercises and real-world scenarios.
Duration: 5 days
Training Methodologies
Case Study
Individual Exercises
Role Play
Group Exercises
Group Presentation
Examination

Cognicert Limited

ISO 7101 Healthcare Quality Management System Lead Auditor Course provides participants with the knowledge and skills necessary to lead audits of quality management systems within healthcare organizations. This comprehensive training program covers the principles, processes, and practices of auditing healthcare quality management systems, focusing on key standards and regulations applicable to the healthcare industry.

Cognicert ISO 7101 Healthcare Quality Lead Auditor Course

early bird registration

Chelmsford

Stratford

This five-day course is a must for anyone who is considering or already working in a role with site manager responsibilities. This course covers all relevant legislation affecting safe working in the building, construction, and civil engineering industries.
It is endorsed by Build UK as the standard training for all construction managers.
Aims
To give a clear understanding of health, safety, welfare, and environmental legislation that affects your management role. It highlights the need for risk assessment in the workplace, the implementation of the necessary control measures and adequate communication to sustain a health and safety culture within the workforce.
Course Content
To give a clear understanding of health, safety, welfare, and environmental legislation that affects your management role. It highlights the need for risk assessment in the workplace, the implementation of the necessary control measures and adequate communication to sustain a health and safety culture within the workforce.
Course Content
• Health, safety, welfare and environmental legislation affecting your daily work
• New guidance and industry best practice
• Duties and responsibilities with regards to health, safety, welfare, and the environment
• Safe working
Prerequisites
This course is for you if you’re considering, or already have management responsibilities for planning, organising, monitoring, controlling and administering groups of staff e.g. site manager.
Assessment
At the end of this course, all delegates will have a clear understanding of controlling health and safety on site from a manager’s role.
Certificate
The certification for this course is valid for 5 years and is endorsed by Build UK as a standard training for all site managers.
To remain certified in this area, you will need to take a refresher course before the expiry date on your certificate, otherwise the full course will need to be retaken.
Instructions
Please note all online Site Management Safety Training Scheme courses with the venue “Online” will be delivered by a tutor over a video call.
This training will be delivered and assessed in English language; therefore, a good standard is required to complete the course.
Further attendee information will be sent in a separate email, please check your inbox.

SMC Safety Solutions

Site Management Safety Training Scheme (SMSTS) 5 day course

Our Site Management Safety Training Scheme (SMSTS) refresher training courses, available both online and in-person, are designed for managers and individuals in positions of authority who completed their original SMSTS training program less than three years ago.

Aims
Participants will undertake a concise yet equally engaging training program covering all essential aspects of enforcing health and safety codes of practice at construction sites. Topics include in-depth discussions on risk assessments and effective methods for monitoring and managing industry-specific hazards.
Instructions
For online courses labeled “Remote Learning,” a tutor will deliver the training via video call.
All SMSTS courses are delivered and assessed in English. Participants must have a good command of the language to successfully complete the program.
Additional attendee information will be provided via email. Please ensure you check your inbox.


Site Management Safety Training Scheme (SMSTS) Refresher

ACCREDITED WITH THE OPEN COLLEGE NETWORK (OCN)
AWARD LEVEL 3 – ADVANCED (2 CREDITS)
 
ONLINE (E-LEARNING) COURSE: Complete at home or work and in your own time.
NO ATTENDANCE REQUIRED


Completion of Introduction to Phlebotomy Course or working experience in phlebotomy is recommended but not essential
 
MINIMUM AGE: 18 (16 with parental consent)
A basic understanding of numeracy and literacy is required.
 
ACCREDITED: Advanced Phlebotomy & Cannulation - Level Three (advanced) awarding 2 credits (Open College Network Nationally Recognised and Accredited within the UK)
+ CPD ACCREDITED (14 CPD Points)
 
Complete our Advanced Phlebotomy & Cannulation on your computer or tablet (at home or work) and in your own time. The course can be completed in stages - you have 8 weeks to complete the course in full.
 
The nationally recognised and accredited certificate (awarded by the Open College Network) can be added to your existing certificate credit value (cumulative credits), and these may also count towards other similar college or university courses.
 
This course is suitable for you if:


You currently work (or have recently worked) as a phlebotomist and wish to add an expand on your knowledge of this subject with a valuable additional qualification, or,
You have completed our Introduction to Phlebotomy Course or have completed a similar course from an approved supplier and wish to update and renew your accreditation, or,
You seek CPD (continual professional development) or requested by your employer as part of your CPD or Induction Programme.
 
Topics covered include:
 
PART I - ADVANCED PHLEBOTOMY

M01: Introduction and Course Overview. Learning outcomes, Assumptions and Overview.
 
M02: Basic Phlebotomy - revision:
Recap of basic phlebotomy theory and practice - precursor to the
advanced course.
 
M03: Specialised Advanced Phlebotomy Equipment:
Equipment and practices in unusual situations.
Patients with special needs and requiring specific attention.
Equipment preparation for blood samples that are collected at 0
degrees, 37 degrees C and other non-standard conditions.
A look at advances in technology and how to use the latest devices.
 
M04: Point of Care Testing:
What is POC Testing? Advantages, Disadvantages and Clinical
Outcomes. Comparison of POC with lab testing. 10 common POC
tests. Roles for phlebotomists performing POC Tests.
 
M05 Neonates and Children:
Sample collection from newborn to pre-adult. A detailed overview of
legal principles of law including child consent and child protection for
phlebotomists. Neonatal and child blood collection equipment.
A comprehensive look at heel and finger-prick procedurs.
 
M06: Geriatric Patients:
The challenges of phlebotomy in older people. Understanding skin
changes and venepuncture implications. A profile of common geriatric
blood tests. Age related problems. Procedural precautions.
 
M07 Special Procedures
Special procedures relating to patient handling and sample handling.
Drug trials and research projects.
 
M08 Special Tests and Sample Handling
A look at sample collection at specific times of day and night,
samples that are protected from light, collected on ice and
collected at body temperature. Procedures for each group.
 
M09 Peripheral (Advanced) Phlebotomy Tasks
A detailed look at advanced roles within a clinical environment
including group leadership, data management, QA procedures
and training.
 
M10 Alternative Environments
A step-by-step look at non-clinical phlebotomy environments.
 
PART II - CANNULATION
M11 Peripheral IV Cannulation - Introduction
Definitions - understanding terminology relating to PIVC.
IV Therapy and NMC guidelines.
 
M12 Legal & Professional Responsibilities
Legal obligations and accountability. Criminal, Civil and Contractual
law in healthcare. Vicarious Liability and your duty of care.
 
M13 Anatomy & Physiology
Sites appropriate to IV cannulation. Hand vs. arm.
Advantages and disadvantages of relevant veins.
An overview of Homeostasis and Fluid Balance.
 
M14 Hygiene and Infection Prevention Control (IPC)
Reducing healthcare-associated infections. Keeping Safe.
Bloodborne pathogens and work practice controls.
Standard Precautions. Waste disposal. Needle-stick injuries
 
M15 Indications and Advantages
When to cannulate, infusion types and benefits over alternative infusion
routes. Continuous and intermittent infusion. Prophylactic use
before procedures and in unstable patients. Contraindications.
 
M16 Equipment
Cannula types, sizes and colour coding. When to use appropriate size.
Equipment overview for total procedure.
 
M17 Vein choice for cannulation
How and when to choose the right vein. Which veins to avoid.
How to manage an unsuccessful cannulation.
 
M18 Procedures
Full procedure for cannulation including correct documentation.
 
M18: Pictorial guide to cannulation
 
M18: Video - Recap on full procedure
 
M19 Contraindications
 
When inappropriate to cannulate including patients with specific
health conditions.
 
M20 Complications
A detailed look at potential complications during and after
cannulation, including phlebitis, infections, petechiae and
haematomas. Clinical signs and corrective actions.


ONLINE (eLearning - Advanced Phlebotomy & Cannulation)

Take your phlebotomy

qualifications to the next level ...

    Nationally Recognised Qualification

    OCN Accredited - Level 3 (advanced)

    CPD Accredited

    Covers specialised and advanced phlebotomy techniques and practices

    Comprehensively covers Peripheral IV Cannulation

    Advanced qualification - additional credits

    Download a digital certificate on completion

    Basic understanding of English language required

​

LOOKING TO ADD PRACTICAL TRAINING?

 

ALSO AVAILABLE AS SEPARATE CLASSROOM OR

VIRTUAL CLASSROOM COURSES:

​

1: Advanced Phlebotomy Course - Level 4

2: Peripheral IV Cannulation Course - Level 3

​

COMPLETION OF INTRODUCTION TO PHLEBOTOMY

COURSE RECOMMENDED BUT NOT ESSENTIAL

Advanced Phlebotomy & Cannulation Course (GPT004E) - E-LEARNING

Awarding Body:&nbsp;Open College Network (OCN Credit4Learning)Award Level:&nbsp;Level Three (Advanced)Minimum Age:&nbsp;14Entry requirements:&nbsp;None. English Level 2 desirableTraining Locations:&nbsp;E-learning - complete this course in the comfort of your own home or at workCourse Overview:Understanding specific words and terms used in the healthcare sector is an absolute must if you are looking to progress in this profession. Once you have a basic understanding of how medical words are constructed they become easy to understand and use are internationally used by nurses, doctors, allied healthcare professionals, dentists and many other medical specialities.If you&#39;re interested in pursuing a health or science career then the requirement and ability to communicate in this way is a necessity.In easy to follow modules, you&#39;ll find our user-friendly format will not only give you a solid foundation in medical language, but can be completed in less than a day (although you have up to 8 weeks to complete). Through well-written and concise rich text, pictures, diagrammes and downloadable support material, this course teaches you how to analyse individual medical word parts such as prefixes, suffixes and word roots.Did you know that most of the medical terms are composed of interchangeable word parts that are used in different combinations? Once you know the various word roots, prefixes and suffixes, you&#39;ll be able to actually define a medical term that you&#39;re not familiar with by simply by recognising its individual parts. More importantly, you&rsquo;ll be able to apply your new skills in this course when you apply for a job.Once completed you will immediately be able to download your pass certificate. (Your new accredited certificate will be posted to you within 6-8 weeks.)The nationally recognised and accredited certificate (awarded by the Open College Network) can be added to your existing certificate credit value (cumulative credits), and these may also count towards other similar college or university courses.This course is supplements any medical or nursing course, however specific, and is open to anyone. At the end of each e-learning section you have up to 6 multiple choice questions to answer, with a passmark of 65%. You can re-sit each section 3 times.<hr style="color: rgb(51, 51, 51); border-color: var(--border-muted); border-style: solid; clear: both; break-after: page; user-select: none; box-sizing: border-box;" fr-original-style=" color: rgb(51, 51, 51);">Is this course for me?This course is suitable for you if:-- Allied Healthcare Professionals (Phlebotomists, Physiotherapists, etc.) -- Care Support Workers and Healthcare Assistants -- GP Practice staff -- Medical Secretaries -- Medical Officer Managers -- Medical Records Department Staff -- Clinical Team Secretaries and Ward Staff -- Community Health Specialists -- Medical Students -- Dieticians, Radiologists and Biomedical Technologists Clerical Staff working in the NHS, General, Academic, Private Practice and Primary Care.and anyone who is interested in learning the &ldquo;language of the medical profession&rdquo;!For existing healthcare professionals, completion will add to your CPD (continual professional development) or if requested by your employer as part of your CPD or Induction Programme.This course is available at a concessionary rate if you enrol as a "3 course elearning package". Please call or email us for "package" discount.(Completion of this course adds to your existing credit value and awards an Advanced Level Three Certificate)<hr style="color: rgb(51, 51, 51); border-color: var(--border-muted); border-style: solid; clear: both; break-after: page; user-select: none; box-sizing: border-box;" fr-original-style=" color: rgb(51, 51, 51);">What does this course cover?Topics covered include:Introduction to Medical Terminology Concepts of term building &ndash; medical terms and word parts Word Roots and Combining Forms Suffixes Prefixes Commonly used symbols and abbreviations Abbreviations, Symbols and their meanings Word parts and their meanings Working with examples &ndash; word building activities Self-Test I and Self-Test IIAdditional support material can be downloaded as you progress through the course.Download a&nbsp;<a href="https://drive.google.com/file/d/14uRPgLS2F6MInDqweavm8kjrLjEDDeby/view?usp=sharing" style="color: rgb(30, 126, 200); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(30, 126, 200);"></a><a href="https://drive.google.com/file/d/14uRPgLS2F6MInDqweavm8kjrLjEDDeby/view?usp=sharing" target="_blank" style="color: rgb(30, 126, 200); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(30, 126, 200);">Course Itinerary</a> <hr style="color: rgb(51, 51, 51); border-color: var(--border-muted); border-style: solid; clear: both; break-after: page; user-select: none; box-sizing: border-box;" fr-original-style=" color: rgb(51, 51, 51);"><img src="https://s3.amazonaws.com/images.ecwid.com/images/wysiwyg/product/20661234/206740469/1591525097385817184361/Accreditation_Strip_jpg" fr-original-style="" style="cursor: pointer; padding: 0px 1px; user-select: none; max-width: 100%; position: relative; box-sizing: border-box;" fr-original-class="fr-draggable">

Awarding Body: Open College Network (OCN Credit4Learning)
Award Level: Level Three (Advanced)
Minimum Age: 14
Entry requirements: None. English Level 2 desirable
Training Locations: E-learning - complete this course in the comfort of your own home or at work
Course Overview:
Understanding specific words and terms used in the healthcare sector is an absolute must if you are looking to progress in this profession. Once you have a basic understanding of how medical words are constructed they become easy to understand and use are internationally used by nurses, doctors, allied healthcare professionals, dentists and many other medical specialities.
If you're interested in pursuing a health or science career then the requirement and ability to communicate in this way is a necessity.
In easy to follow modules, you'll find our user-friendly format will not only give you a solid foundation in medical language, but can be completed in less than a day (although you have up to 8 weeks to complete). Through well-written and concise rich text, pictures, diagrammes and downloadable support material, this course teaches you how to analyse individual medical word parts such as prefixes, suffixes and word roots.
Did you know that most of the medical terms are composed of interchangeable word parts that are used in different combinations? Once you know the various word roots, prefixes and suffixes, you'll be able to actually define a medical term that you're not familiar with by simply by recognising its individual parts. More importantly, you’ll be able to apply your new skills in this course when you apply for a job.
Once completed you will immediately be able to download your pass certificate. (Your new accredited certificate will be posted to you within 6-8 weeks.)
The nationally recognised and accredited certificate (awarded by the Open College Network) can be added to your existing certificate credit value (cumulative credits), and these may also count towards other similar college or university courses.
This course is supplements any medical or nursing course, however specific, and is open to anyone. At the end of each e-learning section you have up to 6 multiple choice questions to answer, with a passmark of 65%. You can re-sit each section 3 times.



Is this course for me?
This course is suitable for you if:
-- Allied Healthcare Professionals (Phlebotomists, Physiotherapists, etc.)
-- Care Support Workers and Healthcare Assistants
-- GP Practice staff
-- Medical Secretaries
-- Medical Officer Managers
-- Medical Records Department Staff
-- Clinical Team Secretaries and Ward Staff
-- Community Health Specialists
-- Medical Students
-- Dieticians, Radiologists and Biomedical Technologists
Clerical Staff working in the NHS, General, Academic, Private Practice and Primary Care.
and anyone who is interested in learning the “language of the medical profession”!
For existing healthcare professionals, completion will add to your CPD (continual professional development) or if requested by your employer as part of your CPD or Induction Programme.
This course is available at a concessionary rate if you enrol as a "3 course elearning package". Please call or email us for "package" discount.
(Completion of this course adds to your existing credit value and awards an Advanced Level Three Certificate)



What does this course cover?
Topics covered include:
Introduction to Medical Terminology
Concepts of term building – medical terms and word parts
Word Roots and Combining Forms
Suffixes
Prefixes
Commonly used symbols and abbreviations
Abbreviations, Symbols and their meanings
Word parts and their meanings
Working with examples – word building activities
Self-Test I and Self-Test II
Additional support material can be downloaded as you progress through the course.
Download a Course Itinerary








Medical Terminology

Understanding specific words and terms used in the healthcare sector is an absolute must if you are looking to progress in this profession. Once you have a basic understanding of how medical words are constructed they become easy to understand and use are internationally used by nurses, doctors, allied healthcare professionals, dentists and many other medical specialities.

Medical Terminology Course (GPT501)

Awarding Body:&nbsp;Open College Network (OCN Credit4Learning)Award Level:&nbsp;Level Three (Advanced)Minimum Age:&nbsp;18Entry requirements:&nbsp;None. English Level 2 desirable.Training Locations:&nbsp;E-learning - complete this course in the comfort of your own home or at work<hr style="color: rgb(51, 51, 51); border-color: var(--border-muted); border-style: solid; clear: both; break-after: page; user-select: none; box-sizing: border-box;" fr-original-style=" color: rgb(51, 51, 51);">Course Overview:It takes a very special person to care for those at the end of their life&rsquo;s journey. Yet for the terminally ill and their families, the gifts of compassion, dedication and skill are priceless treasures. This End of Life (Palliative Care) Course covers the issues and practices involved in caring for the terminally ill and is suitable for both healthcare professionals and individuals looking at optimising their care skills and practices.This course will help you to gain a better knowledge of the procedures and best practices which underpins end of life care. It will help you to learn about the delivery of optimal end of life care and improve your communication skills to strengthen working relationships with healthcare professionals during this period. You will also feel you have a much better understanding on how to support the friends and family of the person that you are caring for.In this online course, you will learn to address the ethical issues and characteristics of hospice and palliative care. You will also understand the assessment and management of pain. And you will be able to help patients and their families cope with dying, death, and the grief that follows and, in doing so, will ensure that the process is in the very best interests of the individual concerned.If you are an individual looking after a terminally ill relative this course bridges the divide between understanding how healthcare professionals work and understanding how your relative or friend should be managed by your support team.This course can also be combined with our&nbsp;Healthcare Practice (Fundamental Care Skills) Course&nbsp;which will also prepare you with a general and very solid foundation qualification in healthcare. Both qualifications combined will give you a total of 6 credits which you can also use towards other future qualifications (at many UK Colleges and Universities).Once completed you will immediately be able to download your pass certificate. (Your new accredited certificate will be posted to you within 6-8 weeks.)The nationally recognised and accredited certificate (awarded by the Open College Network) can be added to your existing certificate credit value (cumulative credits), and these may also count towards other similar college or university courses.This course will perfectly supplement any medical or nursing course, however specific, and is open to anyone. At the end of each e-learning section you have up to 6 multiple choice questions to answer, with a passmark of 65%. You can re-sit each section 3 times.<hr style="color: rgb(51, 51, 51); border-color: var(--border-muted); border-style: solid; clear: both; break-after: page; user-select: none; box-sizing: border-box;" fr-original-style=" color: rgb(51, 51, 51);">Is this course for me?This course is suitable for you if:-- You are a healthcare professional or healthcare student and looking at focussing on this area of work -- You are a healthcare professional looking to add a specialised qualification to your C.V. -- You are an individual caring for a terminally ill relative or friend and would like to be fully aligned with current medical practices and end-of-life procedures -- You are currently working in a Hospice, Care Home, Geriatric Unit or Hospital and have been advised to complete this course. Add to your CPD (continual professional development) or if requested by your employer as part of your CPD or Induction Programme. (Completion of this course adds to your existing credit value and awards an Advanced Level Three Certificate)<hr style="color: rgb(51, 51, 51); border-color: var(--border-muted); border-style: solid; clear: both; break-after: page; user-select: none; box-sizing: border-box;" fr-original-style=" color: rgb(51, 51, 51);">What does this course cover?Topics covered include:M01: Introduction and Course Overview M02: Caring for people at the end of their life M03: Palliative Care M04: What is person-centred care? M05: Equality, Diversity and Rights M06: Planning Ahead M07: End of Life Strategies and Guidelines M08: Communication M09: Nutrition, Hydration and Mouth Care M10: Symptom Control M11: Identifying the Dying Phase of Life M12: The bereavement process M13: Working within the Multidisciplinary TeamDownload a certificate as soon as completed.This course is also supported with a video presentation and additional support material can be downloaded as you progress through the course.Download a&nbsp;<a href="https://drive.google.com/file/d/1zDO1PzSKxk08nGsgnig5NwCmki__qCBG/view?usp=sharing" style="color: rgb(30, 126, 200); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(30, 126, 200);"></a><a href="https://drive.google.com/file/d/1zDO1PzSKxk08nGsgnig5NwCmki__qCBG/view?usp=sharing" target="_blank" style="color: rgb(30, 126, 200); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(30, 126, 200);">Course Itinerary</a> <hr style="color: rgb(51, 51, 51); border-color: var(--border-muted); border-style: solid; clear: both; break-after: page; user-select: none; box-sizing: border-box;" fr-original-style=" color: rgb(51, 51, 51);"><img src="https://s3.amazonaws.com/images.ecwid.com/images/wysiwyg/product/20661234/206740469/1591525097385817184361/Accreditation_Strip_jpg" fr-original-style="" style="cursor: pointer; padding: 0px 1px; user-select: none; max-width: 100%; position: relative; box-sizing: border-box;" fr-original-class="fr-draggable">

Awarding Body: Open College Network (OCN Credit4Learning)
Award Level: Level Three (Advanced)
Minimum Age: 18
Entry requirements: None. English Level 2 desirable.
Training Locations: E-learning - complete this course in the comfort of your own home or at work



Course Overview:
It takes a very special person to care for those at the end of their life’s journey. Yet for the terminally ill and their families, the gifts of compassion, dedication and skill are priceless treasures. This End of Life (Palliative Care) Course covers the issues and practices involved in caring for the terminally ill and is suitable for both healthcare professionals and individuals looking at optimising their care skills and practices.
This course will help you to gain a better knowledge of the procedures and best practices which underpins end of life care. It will help you to learn about the delivery of optimal end of life care and improve your communication skills to strengthen working relationships with healthcare professionals during this period. You will also feel you have a much better understanding on how to support the friends and family of the person that you are caring for.
In this online course, you will learn to address the ethical issues and characteristics of hospice and palliative care. You will also understand the assessment and management of pain. And you will be able to help patients and their families cope with dying, death, and the grief that follows and, in doing so, will ensure that the process is in the very best interests of the individual concerned.
If you are an individual looking after a terminally ill relative this course bridges the divide between understanding how healthcare professionals work and understanding how your relative or friend should be managed by your support team.
This course can also be combined with our Healthcare Practice (Fundamental Care Skills) Course which will also prepare you with a general and very solid foundation qualification in healthcare. Both qualifications combined will give you a total of 6 credits which you can also use towards other future qualifications (at many UK Colleges and Universities).
Once completed you will immediately be able to download your pass certificate. (Your new accredited certificate will be posted to you within 6-8 weeks.)
The nationally recognised and accredited certificate (awarded by the Open College Network) can be added to your existing certificate credit value (cumulative credits), and these may also count towards other similar college or university courses.
This course will perfectly supplement any medical or nursing course, however specific, and is open to anyone. At the end of each e-learning section you have up to 6 multiple choice questions to answer, with a passmark of 65%. You can re-sit each section 3 times.



Is this course for me?
This course is suitable for you if:
-- You are a healthcare professional or healthcare student and looking at focussing on this area of work
-- You are a healthcare professional looking to add a specialised qualification to your C.V.
-- You are an individual caring for a terminally ill relative or friend and would like to be fully aligned with current medical practices and end-of-life procedures
-- You are currently working in a Hospice, Care Home, Geriatric Unit or Hospital and have been advised to complete this course.

Add to your CPD (continual professional development) or if requested by your employer as part of your CPD or Induction Programme.
(Completion of this course adds to your existing credit value and awards an Advanced Level Three Certificate)



What does this course cover?
Topics covered include:
M01: Introduction and Course Overview
M02: Caring for people at the end of their life
M03: Palliative Care
M04: What is person-centred care?
M05: Equality, Diversity and Rights
M06: Planning Ahead
M07: End of Life Strategies and Guidelines
M08: Communication
M09: Nutrition, Hydration and Mouth Care
M10: Symptom Control
M11: Identifying the Dying Phase of Life
M12: The bereavement process
M13: Working within the Multidisciplinary Team
Download a certificate as soon as completed.
This course is also supported with a video presentation and additional support material can be downloaded as you progress through the course.
Download a Course Itinerary






General Nursing

Care Worker

Healthcare Assistant

Care

Nursing

End Of Life Care

Assisting patients at the end of their life's journey ...

    Nationally Recognised Qualifications

    Accredited OCN Credit4Learning - Level 3

    Accredited CPD (The CPD Certification Service)​

    Expand your horizons to include this specialised area of caring

    Comprehensively covers end of life and terminal patient care skills

    Includes support and reference material to download and keep

    No previous experience or qualification needed

    Download a certificate on completion of your online course

2826 Courses in Sheffield

Best Practice Board Meeting Tips

By Ralph Ward

Level 2 PAT Testing Training Course - CPD Accredited

By Worksafepat Ltd

NPORS Slinger / Signaller (N402)

By Dynamic Training and Assessments Ltd

NPORS Dozer (N215)

By Dynamic Training and Assessments Ltd

NPORS Compact Crane (N140)

By Dynamic Training and Assessments Ltd

NPORS Vehicle Marshal (N403)

By Dynamic Training and Assessments Ltd

NPORS Rear Tipping Dumper (N205)

By Dynamic Training and Assessments Ltd

NPORS Road Roller (N214)

By Dynamic Training and Assessments Ltd

NPORS Harness and Fall Arrest (N723)

By Dynamic Training and Assessments Ltd

NPORS Multi Directional Lift Truck (N135)

By Dynamic Training and Assessments Ltd

Search By Location