2046 Courses in Sheffield

This 2-day course offers the requalification of a variety of first aid situations and how to respond to an emergency. It gives delegates the confidence to deal with any of these situations safely and efficiently.

Networks demystified training course description A concise overview course covering all aspects of networking with particular emphasis of use of the 7 layer model as a framework for discussing and learning new network terms enabling delegates to recognise the main buzzwords used in the industry. What will you learn Use the 7 layer model to classify networking terms. Differentiate between LANS and WANS. Recognise bandwidth measurements. List LAN and WAN technologies. Recognise cabling issues in a network. Networks demystified training course details Who will benefit: Sales staff, managers and other non-technical personnel. Technical personnel may benefit more from our Intro to data communications and networking course. Prerequisites: None. Duration 1 day Networks demystified training course contents What are networks? What is a network? Types of network, Local Area Networks (LANs), Wide Area Networks (WANs), connecting networks together with routers. The 7 layer model What is the 7 layer model? The importance of standards, using the 7 layer model to classify networking terms. Cables Copper, Fibre, Air, standards, connectors, LAN cables, WAN cables, distance limitations, hubs and repeaters, other issues. The radio spectrum. Bandwidth Bits and bytes. Bandwidth measurements, common technologies and their bandwidth, the impact of applications on bandwidth. Full and half duplex. Joining cables together to increase bandwidth (Link aggregation). LANs and WANs What is Ethernet? What is WiFi? What are Leased lines? What is MPLS? Ethernet switches Ethernet 'packets', MAC addresses, what is a switch, what is the difference between a hub and a switch. TCP/IP What is TCP/IP? What is a protocol? What is IP? What is TCP? The role of routers in joining LANS and WANS, What is the Internet? Applications Ways to use the network, clients, servers, web browsing and HTTP, Email, instant messaging, multimedia applications.

The Site Management Safety Training Scheme, or the SMSTS course, is a 5 day course provided by our tutors to over a thousand people every year. This course is ideal for those in any role of responsibility within the construction industry, or for anyone looking to become a site manager in the future. The Site Management Safety Training Scheme is strongly regarded as one of the best available and provides you with a thorough health and safety training background within the current legal guidelines. Construction site managers and supervisors have a legal duty to ensure the health and safety of their fellow workers and the public. Not only are there laws and regulations to adhere to, there is a moral duty to do all that is possible to prevent accidents and injuries onsite. Therefore proper training is a necessity and a requirement. Attending SMSTS courses can show you comply with the laws and prepare you to manage a safe site at all times. SMSTS Course Breakdown When studying SMSTS courses you will be taught how to work and manage following the regulations stipulated by the Health and Safety at Work Act. Some of the areas which are covered during the five day SMSTS training course include: SITE SET UP RISK ASSESSMENTS METHOD STATEMENTS SCAFFOLDING EXCAVATIONS SCAFFOLDING DEMOLITION CONFINED SPACES You will be required to attend all five days of the course in order to be awarded the Site Management Safety Training Scheme qualification. During 5-day SMSTS courses delegates will need to show understanding of the main elements and pass the core exercises. At the end of the training you will be required to sit a final examination, passing the exam will mean you qualify for the SMSTS certificate which is then valid for five years. Staying In Date After the five years it is necessary to return for a two day SMSTS Refresher course to make sure you are still up to date with the latest health and safety regulations. By passing and maintaining your Site Management Safety Training Scheme training you are able to prove that you are complying with the demands and laws regarding construction health and safety. 5 day SMSTS courses are considered to be an indication of the competence of a Site Manger according to the Approved Code of Practice for the Construction (Design and Management) Regulations (CDM). The training is also ideal for Site Managers as well as: PROPRIETORS OF CONSTRUCTION COMPANIES PROJECT MANAGERS SITE SUPERVISORS It must be stressed to all course attendees the need to attend ALL sessions since without full attendance the examining body will not award the CITB SMSTS training Qualification – Construction Site Managers Safety Certificate.

Construction (Design & Management) Regulations 2015 - this law applies to the whole construction...

Who should learn? This course has been designed for those who are new to EV Charging Installations or for those requiring a better understanding of electric vehicle charging equipment installations. Learners using this course could be from any background or industry sector, from apprentices through to senior managers. Course Introduction This online course will cover the key aspects of the design, specification and installation of Electric Vehicle Charging Equipment Installation. This course will look at the requirements detailed in Section 722 of BS 7671:2018+A1:2020 as well as the IET Code of Practice for Electric Vehicle Charging Equipment Installation, 4th Edition. The course will also help to enhance your expertise on the best practice for Electric Vehicle Charging Equipment Installation, providing you with a deeper understanding of how to select and use the correct earthing systems to protect against electric shock as well looking into vehicle-to-grid, on street installations and smart infrastructure integration. We would recommend that you purchase a copy of The Code of Practice For Electric Vehicle Charging Equipment Installation, Fourth Edition to get the best out of this course. Learning Objectives Through this online course, you will learn: How to specify Electric Vehicle Charging Equipment Installations How to design electrical installations containing electric vehicle charging and supply equipment The steps involved in planning, installing and commissioning of electric vehicle charging points Key risks and hazards for various types of installation, and how to address them, including: Dwellings, Commercial and Industrial premises, On-Street installations, and filling stations.

The Total EAL Inspection and Testing Level 3 package. The objective of this course is to provide you with an understanding of the practices/theory involved in the initial verification and commissioning of electrical installations and will cover both single and three phase systems. This EAL Combined 4337 and 4338 electrical course is ideal for people with limited experience of initial inspection, testing and verification and/or periodic inspection and testing of electrical installations. If you already work as an Electrician, but have not carried out inspection and testing since qualifying, or you require to update before moving onto other qualifications, then this may be the course for you. The objective of the course is to give you a good understanding of the theory/practices required to do both a periodic inspection and initial verification/commissioning of electrical installations. The course will improve both your inspection/testing and periodic skills.

This industrial electrical maintenance course is designed to enable candidates who have a small amount of electrical knowledge to gain recognised qualifications and skills to enable them to enter an industrial environment and work as a industrial electrician. The industrial electrical maintenance course will include a large amount of practical, enabling the candidate to install, fault find, design and wiring up control panels, using a variety of different methods. Industrial electrical maintenance course aims The aim of the industrial electrical maintenance course is to provide solid foundations upon which the participant will be able to build and develop. Emphasis is given to providing the necessary skills, which will allow the participant to carry out routine electrical tasks. It is also made clear that a participant needs to identify and know their own limitations, allowing tasks to be carried out in a safe manner, not giving rise to danger. If your looking for industrial electrician training this course is for you.

Course Description: The 18th edition course is a 3 day short course aimed at anyone involved in the design, construction and inspection and testing of electrical systems, also a nationally recognised ‘must have’ qualification for companies seeking to recruit electricians. It is intended to introduce the candidate to a working knowledge of the Wiring Regulations along with a brief overview of the Electricity at Work Regulations covering their statutory duties. Previous knowledge of the regulations is not assumed, however, a fundamental knowledge of electrical principles is assumed. Please be aware that the Wiring Regulations course is not designed to teach you every regulation in the book but it will teach you the best practices on how the reference the latest regulations as you would on the job. As such key topics currently covered on the 17th Edition will still be included. We have been delivering Wiring Regulations courses for many years and although it is mainly theory based you cannot beat real training in a real classroom. By training with other people in your class you will benefit from being able to ask relevant questions as well as finding the answers to many questions from your fellow students that you may not have even thought of. The examination is a 2 hour multiple choice, open book PC based examination with instant results. The course cost includes examination entry fees. Focus: You will study the latest standard of the IET wiring regulations, including essential subjects such as safety, selection and erection of electrical equipment. There are 8 key modules and current amendments: Section 1 – Scope, Object and FundamentalsSection 2 – DefinitionsSection 3 – Assessment of general characteristicsSection 4 – Protection for SafetySection 5 – Selection and Erection of equipmentSection 6 – Inspection & TestingSection 7 – Special Installations or locationsSection 8 – Functional Requirements This course does include the latest amendments such as: Electromagnetic Disturbance Surge Protection Medical locations Operating and Maintenance Gangways Arc Fault Detection Devices (AFDDs) Changes to fire safety requirements in chapter 422, covering the design of electrical installations in industrial, commercial and multiple-occupancy homes, as well as new information for ‘protected escape routes’ Protection against over voltages Changes across Part 7: Special Locations This classroom based course will show, teach and perfect you on how to reference and use the book for situations that you will encounter while working in the field.

Level 3 Certificate in Assessing Vocational Achievement

18th Edition Course Description: At this time the 18th edition course is a 3 day short course clearly aimed at anyone involved in the design, construction, inspection and testing of electrical installations & systems, equally it is a nationally recognised ‘must have’ qualification for companies seeking to recruit electricians, or indeed individuals joining Part P Schemes. Every electrical installation that was designed to the 18th edition regulations (which was released in July 2018) or all electrical installations from 2019 onwards will have been to the 18th edition of the IET Wiring Regulations BS7671 2018. Firstly it is intended to introduce the candidate to a working knowledge of the Wiring Regulations (BS7671 IET) whilst also giving a brief overview of the Electricity at Work Regulations covering their statutory duties. Previous knowledge of the regulations is not assumed, however, a fundamental knowledge of electrical principles is assumed. Please be aware that the 18th Edition course is not designed to teach you every electrical regulation in the BS7671 nevertheless it will teach you the best practices on how the reference the latest regulations as you would on the job. As such key topics currently covered on the 17th Edition will still be included. We have been delivering 18th Edition courses for many years and although it is mainly theory based you cannot beat real training, in a real classroom. Furthermore by training with other people in your class you will benefit from being able to ask relevant questions as well as finding the answers to many questions from your fellow students that you may not have even thought of. The examination is a 2 hour multiple choice, open book PC meaning you will be allowed to take a copy of the BS 7671:2018+A2:2022 IET WIRING REGULATIONS just as you would in the real world. It is also a PC based examination with instant results. The course cost includes examination entry fees. On completion of the training and Examination you will be awarded with the 18th edition qualification City & Guilds 2382. Whether your a practicing electrician or enrolled on other qualifications this course will be delivered in a great learning environment. We have been delivering 18th edition training for over 10 years and have helped many people achieve the 18th edition qualification.