Name: Geomechanics at Well and Field Scale
Price: 3697 GBP
Availability: InStock

<h4>Overview</h4>
						<hr />
						<div></div>
							<p>
							</p><p>The development, monitoring, and continued improvement of a highly-integrated, internal audit function is essential for the continued financial success, stability, and growth of world-class business entities. A well-designed and effective internal audit system will provide verification and support that accounting and financial policies, procedures, and controls are working adequately and will spotlight any significant matters that need attention. </p>
<p>
							
							</p><div>
						
					</div>

GBA Corporate

Internal Auditing and Modern International Standards

Online

On Site

<div>
</div>
<section>
<div>
<h2><strong>About this training course</strong></h2>
<p>This 5 full-day course will cover all aspects of steam turbines including design and features of modern turbines, material, rotor balancing, features enhancing the reliability and maintainability of steam turbines, rotor dynamic analysis, Campbell, Goodman and SAFE diagrams, Blade failures: causes and solutions, maintenance and overhaul of steam turbines, and modeling of steam turbines. This course will also cover in detail all the components of these turbines, instrumentation, control systems, governing systems, and selection criteria.</p>
<p>The main focus of this course will be on the failure modes of steam turbine components, causes and solutions for component failure, maintenance, refurbishment and overhaul, rotor dynamic analysis of steam turbines, and computer simulation of steam turbine rotor dynamics. All possible failure modes of steam turbine components and the maintenance required to prevent them will be discussed in detail. Examples of rotor dynamic analysis, and stability criteria will be covered thoroughly.</p>
<p>This course will also provide up-dated information in respect to all the methods used to enhance the availability, reliability, and maintainability of steam turbines, increase the efficiency and longevity of steam turbines, and improve the rotor dynamic stability. This course will also cover in detail all steam turbine valves, jacking oil system, turning gear, turbine supervisory system, steam turbine monitoring technology, validation, and verification tests, performance testing of steam turbines and steam turbine codes especially ASME PTC6.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong><span>Steam Turbine Components and Systems:</span></strong><span> Learn about all components and systems of the various types of steam turbines such as: stationary and rotating blades, casings, rotor, seals, bearings, and lubrication systems</span></li>
<li><strong><span>Steam Turbine Failure Modes, Inspection, Diagnostic Testing, and Maintenance:</span></strong><span> Understand all the failure modes of steam turbine components, causes and solutions of steam turbine component failure, inspection, diagnostic testing, and all maintenance activities required for steam turbines to minimize their operating cost and maximize their efficiency, reliability, and longevity.</span></li>
<li><strong><span>Steam Turbine Instrumentation and Control Systems:</span></strong><span> Learn about the latest instrumentation, control systems, and governing systems of steam turbines</span></li>
<li><strong><span>Steam Turbine Reliability and Maintainability:</span></strong><span> Increase your knowledge about all the methods used to enhance the reliability and maintainability of steam turbines as well as the predictive and preventive maintenance required for steam turbines</span></li>
<li><strong><span>Steam Turbine Selection and Applications:</span></strong><span> Gain a detailed understanding of the selection considerations and applications of steam turbines in steam power plants, co-generation, combined-cycle plants, and drivers for compressors pumps, etc</span></li>
<li><strong><span>Steam Turbine Valves, Load-Frequency Control, Turbine Bypass Systems, and Steam Turbine Superheater Attemperators:</span></strong><span> Gain a thorough understanding of all steam turbine valves, load-frequency control, turbine bypass systems, and steam turbine superheater attemperators</span></li>
<li><strong><span>Jacking Oil System and Turning Gear:</span></strong><span> Learn about the turbine jacking oil system and turning gear operation</span></li>
<li><strong><span>Turbine Supervisory System:</span></strong><span> Gain a thorough understanding of the turbine supervisory system</span></li>
<li><strong><span>Steam Turbine Monitoring Technology, Validation, and Verification Tests for Power Plants:</span></strong><span> Learn about steam turbine monitoring technology, validation, and verification tests for power plants</span></li>
<li><strong><span>Steam Turbine Codes:</span></strong><span> Learn about steam turbine codes including ASME PTC6, DIN Test Code, and International Electrotechnical Commission (IEC) Doc 1, IEC Doc B</span></li>
<li><strong><span>Steam Turbine Rotor Dynamic Analysis, Campbell, Goodman, and SAFE Diagrams: </span></strong><span>Gain a thorough understanding of steam turbine rotor dynamic analysis, Campbell, Goodman, and SAFE diagrams</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li><span>Engineers of all disciplines</span></li>
<li><span>Managers</span></li>
<li><span>Technicians</span></li>
<li><span>Maintenance personnel</span></li>
<li><span>Other technical individuals</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</span></p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>Excerpt of the relevant chapters from the 'POWER GENERATION HANDBOOK' second edition published by McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>Excerpt of the relevant chapters from the 'POWER PLANT EQUIPMENT OPERATION AND MAINTENANCE GUIDE' published by</span> <span>McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>STEAM TURBINE TECHNOLOGY MANUAL (includes practical information about steam turbines maintenance, testing, and refurbishment - 500 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

EnergyEdge - Training for a Sustainable Energy Future

Renewable Energy

Oil & Gas

Steam Turbine Technology

Team of 10, pp

Normal Fee, pp

London

<div style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);">Emotionally Focused Therapy (EFT) is a highly effective form of couples counseling that addresses emotional needs and attachment styles. EFT is ideal for resolving issues such as anger, loss of trust, and emotional injuries. This therapy helps couples form secure bonds, fostering long-term relationship stability.</div><div style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">&nbsp;</div><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Key areas</strong>: emotional needs, attachment styles, anger issues, trust loss, secure bonds</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">3 x 1 hour sessions</p>

Miss Date Doctor Dating Coach London, Couples Therapy

Emotionally Focused Therapy (EFT) (COUPLES)

General admission

<div>
</div>
<section>
<div>
<h2>About this Training</h2>
<p>Growing global competitiveness in the refining products' market requires an in-depth knowledge of fuel technology processes, global quality standards and quality monitoring procedures. As the global market turns to cleaner fuels with more stringent specifications, the market in which refiners operate in, is getting more sophisticated and challenging.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>Upon completion of this course, participants will be able to:</p>
<ul>
<li>Get a clear overview of processing background and how white products are produced and blended
</li>
<li>Understand the blending impact on product quality and how to deal with quality giveaways, stability of blends and specification margins
</li>
<li>Get a clear overview of fuel blending operations, blending principles, specifics and operations
</li>
<li>Understand the role of additives and how additives are selected and used to meet the specification for different products and different markets
</li>
<li>Realize the importance of specifications, their limitations and how to ensure that the product is fit for purpose<br />
Be able to correctly interpret the laboratory results<p></p>
</li></ul></div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>The course is intended for individuals who are interested in the field of refining blending. The following personnel will benefit from the knowledge shared in this course:</p>
<ul>
<li>Plant operative planning and scheduling specialists
</li>
<li>Oil products trading and blending personnel
</li>
<li>Laboratory supervisors and technical personnel
</li>
<li>Sales, marketing and product trading personnel
</li>
<li>Refinery market and research analysts
</li>
<li>Process and chemical Engineers
</li>
<li>Personnel from the oil, fuel, biofuel, additive and auto industries
</li>
<li>Regulatory and policy-makers personnel<br />
</li></ul></div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your expert course leader is an experienced manager with more than 25 years of operational experience in the downstream Oil &amp; Gas industry. She is a recognised expert in conventional, biofuels and alternative fuels with extensive experience in the crude selection process and formulation of finished products including product portfolio strategy, product quality road mapping and benchmarking. She is a long-time laboratory manager with comprehensive experience in laboratory processes, including financing, benchmarking, efficiency improvement and total quality management processes. </p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Refining Blending

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong><em> </em></h2>
<p>This five-day course provides an intermediate level of understanding of the geomechanical factors that affect wellbore instability, sand production and hydraulic fracture design.  The course is structured such that upon completion, participants will have understood the value that geomechanics can bring to drilling, completion and production operations and will be able to leverage this value wherever it applies.  The course emphasis will be on integrating the topics presented through a combination of lectures, case-studies and hands-on exercises. A special focus will be on how geomechanics knowledge is extracted from routinely acquired well data and how it is applied in the prediction and prevention of formation instability.</p>
<p><strong>Course Highlights</strong></p>
<p>The course is essentially non-mathematical and makes wide use of diagrams, pictures and exercises to illustrate the essential concepts of geomechanics</p>
<ul>
<li>Essential Rock Mechanics Principles</li>
<li>Wellbore Stability Analysis</li>
<li>Anisotropic Rock Properties for unconventional projects</li>
<li>Lost Circulation and Wellbore Strengthening applications</li>
<li>Sand Production Management</li>
<li>Input to Hydraulic Fracture design</li>
<li>Salt instability</li>
</ul>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p><strong>By attending this training, you will be able to acquire the following:</strong></p>
<ul>
<li>Apply the basic concepts of geomechanics to identify, predict and mitigate against formation instability during drilling, completion and production</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>This course is intended for Drilling Engineers, Well Engineers, Production Technologists, Completion Engineers, Well Superintendents, Directional Drillers, Wellsite Supervisors and others, who wish to further their understanding of rock mechanics and its application to drilling and completion.</p>
<p>There is no specific formal pre-requisite for this course.  However, attendees are requested to have been exposed to drilling, completions and production operations in their positions and to have a recommended minimum of 3 years of field experience.</p>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your Expert Course Instructor is an operational geomechanics advisor with over 46 years of experience in exploration, development and production in the upstream oil and gas industry.  After obtaining a BSc (Hons) Physics degree from Aberdeen University, he worked for a variety of oil service companies in wireline operations, management and formation evaluation, before joining Schlumberger in 1995.  Since 2000 he has worked principally in real-time geomechanics operations and developing acousto-geomechical applications, taking on the role of geomechanics advisor and technical manager within the Europe-Africa area of operations.  Before forming his own company in 2014, Your Expert Course Instructor was one of Schlumberger's principal instructors, delivering cross-discipline internal and external geomechanics training to petrophysicists, geologists, reservoir, petroleum, well construction and drilling engineers at operating company locations, training centers and operational centers worldwide.  Through extensive operational and wellsite experience gained in the North Sea, Europe, Africa, South America and the Far East, he has gained a broad based knowledge of drilling, production, log data acquisition, analysis and interpretation that has allowed him to develop and deliver pragmatic solutions to the geomechanical challenges of drilling, sand production, fracturing and unconventional reservoirs, faced by operators.</p>
<p>His principal interests include the development and application of acousto-geomechanical techniques for the evaluation of anisotropic formations and fracture systems and the identification and prevention of wellbore instability</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information about post training coaching support and fees applicable for this.</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Geomechanics

<p style="color: rgb(212, 212, 212); font-size: var(--font-size); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(212, 212, 212);"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Introducing Adjustment Counselling Package: Navigating Life Transitions and Embracing Change</strong></span></p><p style="color: rgb(212, 212, 212); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(212, 212, 212);"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Are you facing challenges in adjusting to major life transitions and seeking support to cope with change? Miss Date Doctor&rsquo;s Adjustment Counselling Package offers you a compassionate and understanding space to navigate through life&rsquo;s adjustments and embrace positive transformation.</strong></span></p><p style="color: rgb(212, 212, 212); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(212, 212, 212);"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Life transitions, such as moving to a new city, starting a new job, or going through significant life changes, can be overwhelming and emotionally taxing. Our experienced counsellors are here to help you navigate these adjustments, find coping strategies, and embrace change with resilience and optimism.</strong></span></p><p style="color: rgb(212, 212, 212); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(212, 212, 212);"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Here&rsquo;s how the Adjustment Counselling Package can support you:</strong></span></p><ul style="color: rgb(230, 230, 230); box-sizing: border-box;" fr-original-style=" color: rgb(230, 230, 230);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"></strong><li style="color: rgb(0, 0, 0); font-weight: bold; box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0); font-weight: bold;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Understanding Transitions: Our counsellors will help you understand the nature of the life transition you are experiencing and its impact on your emotions and well-being.</strong></li><li style="color: rgb(0, 0, 0); font-weight: bold; box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0); font-weight: bold;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Coping with Change: Adjustment counselling equips you with coping strategies to manage stress, anxiety, and uncertainty during times of change.</strong></li><li style="color: rgb(0, 0, 0); font-weight: bold; box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0); font-weight: bold;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Supportive Environment: Our counsellors provide a safe and non-judgmental space where you can freely express your feelings and concerns related to the adjustment process.</strong></li><li style="color: rgb(0, 0, 0); font-weight: bold; box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0); font-weight: bold;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Finding Balance: We&rsquo;ll work with you to find a balance between embracing change and maintaining stability in other areas of your life.</strong></li><li style="color: rgb(0, 0, 0); font-weight: bold; box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0); font-weight: bold;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Creating a Support System: Adjustment counselling helps you identify and build a support system to lean on during times of transition.</strong></li><li style="color: rgb(0, 0, 0); font-weight: bold; box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0); font-weight: bold;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Growth and Resilience: As you navigate through adjustments, our counsellors will help you discover strengths and develop resilience to embrace change positively.</strong></li><li style="color: rgb(0, 0, 0); font-weight: bold; box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0); font-weight: bold;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Setting Realistic Expectations: We&rsquo;ll assist you in setting realistic expectations for yourself during the adjustment period, fostering self-compassion and patience.</strong></li><li style="color: rgb(0, 0, 0); font-weight: bold; box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0); font-weight: bold;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Embracing New Opportunities: Adjustment counselling can help you see transitions as opportunities for growth and new experiences.</strong></li></ul><p style="color: rgb(212, 212, 212); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(212, 212, 212);"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">The Adjustment Counselling Package at Miss Date Doctor is designed to empower you to navigate life&rsquo;s transitions with grace and confidence. Our compassionate counsellors provide guidance and support to help you find stability, embrace change, and thrive through life&rsquo;s adjustments.</strong></span></p><p style="color: rgb(212, 212, 212); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(212, 212, 212);"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Invest in your well-being and take the first step towards embracing change with the Adjustment Counselling Package. Embrace the opportunities for growth and transformation that life transitions bring. Let our skilled counsellors guide you towards a more resilient, positive, and fulfilling journey through life&rsquo;s adjustments.</strong></span></p><p style="color: rgb(212, 212, 212); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(212, 212, 212);"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">3 x 1 hour</strong></span></p><p style="color: rgb(212, 212, 212); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(212, 212, 212);"><br fr-original-style="" style="box-sizing: border-box;"></p><p style="color: rgb(212, 212, 212); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(212, 212, 212);"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><a href="https://relationshipsmdd.com/product/adjustment-counselling-package/" id="isPasted" fr-original-style="" style="-webkit-user-select: auto; font-size: var(--font-size); box-sizing: border-box; color: inherit; cursor: pointer; text-decoration: inherit;">https://relationshipsmdd.com/product/adjustment-counselling-package/</a></strong></span></p>

M.D.D ADJUSTMENT COUNSELLING PACKAGE (SELF IMPROVEMENT)

<div>
</div>
<section>
<div>
<h2><strong>About this Virtual Instructor Led Training (VILT)</strong></h2>
<p><span>The objective of this 4-half-day Virtual Instructor Led Training (VILT) course is to equip participants with the required knowledge so that they can define and implement an effective oil analysis programme, monitor the condition of transformers and understand oil analysis reports as part of their maintenance strategy.</span></p>
<p><span>This VILT course is delivered in partnership with ENGIE Laborelec.</span></p>
<p></p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p><span>Participants will be able to go through the following areas during the VILT course:</span></p>
<p><strong><span>Condition monitoring of power transformers through oil analyses:</span></strong></p>
<ul>
<li><span>Transformer Health Index, Transformer Fleet Condition Assessment, Risk Matrix</span></li>
<li><span>Best practices</span></li>
<li><span>Which oil analyses/how frequent</span></li>
<li><span>DGA: focus on partial discharges, sparking, stray gassing, catalytic effects / interpretation systems.</span></li>
<li><span>Interpretation of results</span></li>
<li><span>Why and when to perform electrical measurements?</span></li>
<li><span>International standards: IEEE, IEC, Duval, ASTM, etc</span></li>
<li><span>Maintenance guidelines</span></li>
<li><span>Trending and reporting</span></li>
<li><span>Sampling techniques</span></li>
</ul>
<p><strong><span>Use of online monitoring for DGA/water: implementation and real-case advantages etc:</span></strong></p>
<ul>
<li><span>New developments: importance of methanol as ageing marker, temperature correction of ageing markers, stray gassing of oils in service etc</span></li>
<li><span>REX, case studies and real-case exercises concerning power transformers within generation and high-voltage grids</span></li>
<li><span>Discussion of reports on power transformers</span></li>
<li><span>Use of unused insulating transformer oils</span></li>
<li><span>Market trends in the use of inhibited and uninhibited oils</span></li>
<li><span>Differences, advantages and drawbacks of uninhibited compared with inhibited oils</span></li>
<li><span>Importance of additives, oxidation stability tests, stray gassing, etc</span></li>
</ul>
<p>
</p></div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p><span>The VILT course is intended for a wide audience, including <strong>professionals who are maintenance staff, electrical engineers and asset managers responsible for transformers</strong>. Typical industries are powerplants, high voltage grids or large industrial sites.</span></p>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>The VILT course will be delivered online in 4 half-day sessions comprising 4 hours per day, with 2 x 10 minutes break per day, including time for lectures, discussion, quizzes and short classroom exercises.</span></p>
<p><span>Course Duration: 4 half-day sessions, 4 hours per session (16 hours in total).</span></p>
<p><span>This VILT course is delivered in partnership with ENGIE Laborelec.</span></p>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p><span>Your expert course leader is a senior expert in the field of insulating and lubricating oils and of condition monitoring of power transformers and turbines. He has 20 years of experience within power industry and since 2010 Key Expert within the ENGIE group. </span><span>He has worked on various international projects such as the Al Dur power plant in Bahrain, Shuweihat II power plant in UAE, PP11 and Jubail Marafiq power plants in Saudi Arabia and Sohar II and Barka III power plants in Oman. He has also been involved in consulting work in Malaysia for Hyrax Oil. Other assignments include Shell, Nynas, Total, ABB, Alstom, CG Pauwels in Europe.</span></p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information about post training coaching support and fees applicable for this.</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Advanced Level - Assessing and Monitoring the Condition of Power Transformers by Oil Analysis

<div fr-original-style="" style="box-sizing: border-box;">
</div>
<section fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<h2 fr-original-style="" style="box-sizing: border-box;">About this Training</h2>
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Subsea pipelines play a critical role in the transportation of hydrocarbons (e.g. oil and gas) from offshore production sites to onshore facilities or other platforms. This course will cover design and construction of subsea pipelines with respect to: design for pressure containment, design for collapse, on-bottom stability, freespans, global (lateral and upheaval buckling), corrosion, materials selection, cathodic protection and coatings.</p>
</div>
</section>
<section fr-original-style="" style="box-sizing: border-box;">
<div id="accordion" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">

Training Objectives 

</div>
<div id="collapseOne" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Upon completion of this course, participants will be able to understand:</p>
<ul fr-original-style="" style="box-sizing: border-box;">
<li fr-original-style="" style="box-sizing: border-box;">Issues and challenges in subsea pipeline design</li>
<li fr-original-style="" style="box-sizing: border-box;">Methods in applying pipeline design codes</li>
<li fr-original-style="" style="box-sizing: border-box;">Techniques in how to specify a pipeline</li>
<li fr-original-style="" style="box-sizing: border-box;">Key considerations in the main methods of pipeline construction</li>
<li fr-original-style="" style="box-sizing: border-box;">Methods and issues surrounding pipeline intervention</li>
</ul>
</div>
</div>
</div>
<div fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">

Target Audience 

</div>
<div id="collapseTwo" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The course is recommended for anyone who wish to gain in-depth knowledge and appreciation of the fundamental principles of the design and construction of subsea pipelines, including:</p>
<ul fr-original-style="" style="box-sizing: border-box;">
<li fr-original-style="" style="box-sizing: border-box;">Team Leaders</li>
<li fr-original-style="" style="box-sizing: border-box;">Senior Managers (Line and Function)</li>
<li fr-original-style="" style="box-sizing: border-box;">Project Managers</li>
<li fr-original-style="" style="box-sizing: border-box;">Graduate Engineers</li>
<li fr-original-style="" style="box-sizing: border-box;">Pipeline Engineers</li>
<li fr-original-style="" style="box-sizing: border-box;">Senior Pipeline Engineers</li>
<li fr-original-style="" style="box-sizing: border-box;">Subsea Engineers</li>
<li fr-original-style="" style="box-sizing: border-box;">Integrity Engineers</li>
<li fr-original-style="" style="box-sizing: border-box;">Quality Assurance Engineers</li>
<li fr-original-style="" style="box-sizing: border-box;">Key Contractor&#39;s Management</li>
</ul>
</div>
</div>
</div>
<div fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">

Course Level 

</div>
<div id="collapsecl" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<ul fr-original-style="" style="box-sizing: border-box;">
<li fr-original-style="" style="box-sizing: border-box;">Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">

Trainer

</div>
<div id="collapseFive" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Your expert course leader is a subsea pipeline consultant with extensive experience in the design, construction, and installation of subsea pipelines for the oil and gas industry. As a consultant, he provides technical expertise and support to clients on all aspects of subsea pipeline projects, from the initial planning and design phase through to construction and commissioning. He is knowledgeable about industry standards, regulations, and best practices for subsea pipelines, and works closely with clients to ensure that projects are delivered safely, on time, and within budget. He has over thirty years&#39; experience in early concept and front-end studies for the initiation of numerous high value upstream oil and gas projects worldwide. He has worked for both Operating Companies and Consultants managing the FEL process for complex, multi-discipline and technically challenging concepts, combining both his technical and project management skills. He has been working with companies like ExxonMobil, Quantum Power, North Caspian Operating Company, OMV Petrom, Port Meridian, BG Group, and etc.    </p>
</div>
</div>
</div>
<div fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">To further optimise your learning experience from our courses, we also offer individualized &#39;One to One&#39; coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br fr-original-style="" style="box-sizing: border-box;">
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">

Accreditions And Affliations

</div>
<div id="collapseSeven" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
               </div>
</div>
</div>
</div>
</section>

Subsea Pipeline Design and Construction

<div>
</div>
<section>
<div>
<h2><strong>About this Virtual Instructor Led Training (VILT)</strong></h2>
<p>Governments, regulators and energy companies are pursuing CO<sub>2</sub> storage technologies to meet their net-zero carbon commitments as well as targets set by the international Paris Agreement on climate change. For successfully executing Carbon Capture &amp; Storage (CCS) projects, various technical, operational, economic and environmental risks and associated stakeholders need to be managed.</p>
<p>In this <strong>5 half-day Virtual Instructor Led Training (VILT) course</strong>, the methods for managing risk in CCS projects are addressed <u>with a focus on CO<sub>2 </sub>injection and storage.</u> The VILT course will also demonstrate how to assess storage capacity of a potential CO<sub>2</sub> storage reservoir, model framing techniques, and well injectivity issues related to CO<sub>2</sub> injection. The potential leak paths will be discussed such as reservoir seals, leakage along faults and aspects of well integrity. In the VILT course, the design of a monitoring programme will also be discussed. The VILT course will be supported by various case studies.</p>
<p>This VILT course will cover the following modules:</p>
<ol>
<li>CCS projects in an international context</li>
<li>Site selection and site characterization</li>
<li>Storage capacity assessment</li>
<li>Injectivity assessment</li>
<li>Containment assessment</li>
<li>Measurement, monitoring &amp; verification</li>
</ol>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>On completion of this VILT course, participants will be able to:</p>
<ul>
<li>Uncover the functions and associated components required to capture, transport and store CO<sub>2</sub> in subsurface aquifers and (depleted) hydrocarbon reservoirs</li>
<li>Find a systematic and integrated approach to risk identification and assessment for CO<sub>2</sub> storage projects (maturation)</li>
<li>Appreciate the requirements (physics modelling) and uncertainties to assess the CO<sub>2</sub> storage capacity of a selected site.</li>
<li>Understand the challenges, data and methods to assess CO<sub>2</sub> well injectivity and well integrity</li>
<li>Identify the leakage pathways of a selected storage site, and understand the assessment methods and associated uncertainties</li>
<li>Learn how to design a monitoring program</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>This VILT course is intended for all surface and subsurface engineers such as facility engineers, geologists, geophysicists, reservoir engineers, petrophysicists, production technologists/engineers, well engineers and geomechanical specialists. Also, (sub)surface team leads, project managers, business opportunity managers, decision executives, and technical risk assessment &amp; assurance specialists will benefit from this VILT course as it provides a common framework and workflow to develop a CCS project.</p>
<p><em><strong>For each class, it is highly recommended that a mix of disciplines mentioned above are represented to facilitate discussions from different perspectives.</strong></em></p>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p>This VILT course is built around cases in which teams work to identify and assess CO2 storage site issues using a systematic thought approach in this course. In addition, exercises are used to practise the aspects of the CCS risk assessment process. The VILT course provides a venue for discussion and sharing of good practices as well as opportunities to practise multi-discipline co-operation and facilitation.</p>
<p>Participants are encouraged to bring their own work issues and challenges and seek advice from the expert course leaders and other participants about all aspects of CCS.</p>
<p><strong>This VILT course will be delivered online in 5 half-day sessions comprising 4 hours per day, with 2 breaks of 10 minutes per day.</strong></p>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p><strong>Trainer 1:</strong></p>
<p>Your expert course leader has more than 36 years of experience in the oil &amp; gas industry with Shell. He gained broad experience in petroleum engineering, with expertise in integrated production systems from subsurface, wells and surface. He has had assignments in Production Technology, R&amp;D, Production Chemistry, Rock Mechanics and Reservoir Engineering cEOR, with a proven track record in technology screening, development and deployment, field development planning, conceptual well design and Production System Optimization (PSO) of gas and oil fields as well as preparing Well, Reservoir &amp; Facility Management (WRFM) strategies and plans. He had also worked on assignments in NAM and did fieldwork in Oman, Gabon and Shell Nigeria. He is a skilled workshop facilitator. He discovered his passion for teaching following an assignment in Shell Learning. During his time in Shell, he developed and taught technical courses to Shell professionals via blended learning.</p>
<p><strong>Trainer 2:</strong></p>
<p>Your second expert course leader has over 30 years of experience identifying, assessing and mitigating technical risks with Shell. The main focal point of his experience is in subsurface and Geomechanical risks. He is the the founding father of various innovations in how we assess risks by tool development (for bore hole stability, 3D geomechanical field evaluations and probabilistic assessment). He also developed an eye for people motivation, change management and facilitation. He was also responsible for the Geomechanical competence framework, and associated virtual and classroom training programme in Shell for 10 years.</p>
<p><strong>Trainer 3:</strong></p>
<p>Your third expert course leader has more than 30 years of experience in Shell, focusing on research and development in drilling and offshore systems. His areas of expertise is in project management, finance, business planning, investment, development studies and economics models. In 2021, he worked on a project that looked into the economic evaluation of P18A field complex for CO<sub>2</sub> storage. He has an MSc in Mechanical Engineering (M.E.) TU Delft Netherlands (Hons) and a baccalaureate from Erasmus University Rotterdam.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information about post training coaching support and fees applicable for this.</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Carbon Capture and Storage (CCS): Project Risks & How to Manage Them

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong> </h2>
<p>Geomechanical evaluations are about the assessment of deformations and failure in the subsurface due to oil &amp; gas production, geothermal operations, CO<sub>2</sub> storage and other operations. All geomechanical evaluations include four types of modelling assumptions, which will be systematically addressed in this training, namely:</p>
<p>1.      Geometrical modelling assumption: Impact of structural styles on initial stress and stress redistribution due to operations</p>
<p>2.      Formation (or constitutive) behaviour: Linear elastic and non-linear behaviour, associated models and their parameters, and methods how to constrain these using</p>
<p>3.      Initial stress: Relation with structural setting and methods to quantify the in-situ stress condition</p>
<p>4.      Loading conditions: Changes in pore pressure and temperature on wellbore and field scale</p>
<p>This 5 full-day course starts with the determination of the stresses in the earth, the impact of different structural styles, salt bodies, faulting and folding on the orientation of the three main principal stress components. Different (field) data sources will be discussed to constrain their magnitude, while exercises will be made to gain hands-on experience.</p>
<p>Subsequently, the concepts of stress and strain will be discussed, linear elasticity, total and effective stress and poro-elasticity in 1D, 2D and 3D, as well as thermal expansion. Participants will be able to construct and interpret a Mohr-circles. Also, different failure mechanisms and associated models (plastic, viscous) will be discussed. All these concepts apply on a material point level.</p>
<p>Next, geomechanics on the wellbore scale is addressed, starting with the stress distribution around the wellbore (Kirsch equations). The impact of mudweight on shear and tensile failure (fracturing) will be calculated, and participants will be able to determine the mudweight window stable drilling operations, while considering well deviation and the use of oil-based and water-based muds (pore pressure penetration). Fracturing conditions and fracture propagation will be addressed.</p>
<p>Field-scale geomechanics is addressed on the fourth day, focussing on building a 3D geomechanical model that is fit-for-purpose (focussing on the risks that need evaluation). Here, geological interpretation (layering), initial stress and formation property estimation (from petrophysical logs and lab experiments) as well as determining the loading conditions come together.</p>
<p>The course is concluded with interpretation of the field-wide geomechanical response to reservoir depletion with special attention to reservoir compaction &amp; subsidence, well failure and fault reactivation &amp; induced seismicity. Special attention is paid to uncertainties and formulating advice that impacts decision-making during development and production stages of a project.</p>
<p>This course can also be offered through Virtual Instructor Led Training (VILT) format.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>Upon completing of this course, the participants will be able to:</p>
<ul>
<li>Identify potential project risks that may need a geomechanical evaluation</li>
<li>Construct a pressure-depth plot based on available field data (density logs, (X)LOT, FIT, RFT)</li>
<li>Employ log-based correlation function to estimate mechanical properties</li>
<li>Produce a simplified, but appropriate geometrical (layered, upscaled) model that honours contrasts in initial stress, formation properties and loading conditions, including</li>
<li>Construct and interpret a Mohr-circle for shear and tensile failure</li>
<li>Calculate the mud weight that leads to shear and tensile failure (fracturing conditions)</li>
<li>Identify potential lab experiments to measure required formation properties</li>
<li>Describe the workflow and data to develop a field-wide fit-for-purpose geomechanical model</li>
<li>Discuss the qualitative impact of pressure and temperature change on the risk related to compaction, well failure, top-seal integrity and fault reactivation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>This course is intended for <strong>Drilling Engineers, Well Engineers, Production Technologists, Completion Engineers, Well Superintendents, Directional Drillers, Wellsite Supervisors and others, who wish to further their understanding of rock mechanics and its application to drilling and completion</strong>.</p>
<p>There is no specific formal pre-requisite for this course. However, the participants are requested to have been exposed to drilling, completions and production operations in their positions and to have a recommended minimum of 3 years of field experience.</p>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Intermediate</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your expert course leader has over 30 years of experience in the Oil &amp; Gas industry, covering all geomechanical issues in the petroleum industry for Shell. Some of his projects included doing research and providing operational advice in wellbore stability, sand failure prediction, and oil-shale retortion among others. He guided multi-disciplinary teams in compaction &amp; subsidence, top-seal integrity, fault reactivation, induced-seismicity and containment. He was also involved in projects related to Carbon Capture Storage (CCS).</p>
<p>He is the founding father of various innovations and assessment tools, and developed new insights into the root causes seismicity induced by Oil &amp; Gas production. Furthermore, he was the regional coordinator for technology deployment in Africa, and Smart Fields (DOFF, iField) design advisor for Shell globally. He was responsible for the Geomechanical competence framework, and associated virtual and classroom training programme in Shell for the last 10 years. He served as one of the Subject Matter Expert (SME) on geomechanics, provided Technical Assurance to many risk assessments, and is a co-author of Shell's global minimun standard on top-seal integry and containment. He has a MSc and PhD in Civil Engineering and computational mechanics from Delft University of Technology, The Netherlands.</p>
<p><strong>Training experience:</strong></p>
<p>Developed and delivered the following (between 2010 and 2020):</p>
<ul>
<li>The competence framework for the global geomechanical discipline in Shell</li>
<li>Online Geomechanical training programs for petroleum engineers (post-doc level)</li>
<li>The global minimum standard for top-seal integrity assessment in Shell</li>
<li>Over 50 learning nuggets with Subject Matter Experts</li>
<li>Various Shell virtual Geomechanical training courses covering all subjects</li>
<li>Developed Advanced Geomechanical training program for experienced staff in Shell</li>
<li>Coaching of KPC staff on Geomechanics and containment issues on an internship at Shell in The Netherlands, Q4 2014</li>
<li>Lectured at the Utrecht University summer school (The Netherlands, 2020) on induced seismicity among renowned earthquake experts (Prof. Mark Zoback, Prof. Jean-Philippe Avouac, Prof. Jean-Pierre Ampuero and Prof. Torsten Dahm) (https://www.nwo.nl/onderzoeksprogrammas/deepnl/bijeenkomsten/6-10-juli-2020-deepnl-webinar-series-induced-seismicity)</li>
<li>Lectured at the Danish Technical University summer school (Copenhagen, 2021) summer school on Carbon Capture and Storage (https://www.oilgas.dtu.dk/english/Events/DHRTC-Summer-School)</li>
<li>Virtual Carbon Capture and Storage (CCS): Project Risks &amp; How to Manage Them training course (October and November 2021)</li>
</ul>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Educators providing Courses in Manchester

Courses matching "Stability"

Internal Auditing and Modern International Standards

By GBA Corporate

Steam Turbine Technology

By EnergyEdge - Training for a Sustainable Energy Future

Emotionally Focused Therapy (EFT) (COUPLES)

By Miss Date Doctor Dating Coach London, Couples Therapy

Refining Blending

By EnergyEdge - Training for a Sustainable Energy Future

Geomechanics

By EnergyEdge - Training for a Sustainable Energy Future

M.D.D ADJUSTMENT COUNSELLING PACKAGE (SELF IMPROVEMENT)

By Miss Date Doctor Dating Coach London, Couples Therapy

Advanced Level - Assessing and Monitoring the Condition of Power Transformers by Oil Analysis

By EnergyEdge - Training for a Sustainable Energy Future

Subsea Pipeline Design and Construction

By EnergyEdge - Training for a Sustainable Energy Future

Carbon Capture and Storage (CCS): Project Risks & How to Manage Them

By EnergyEdge - Training for a Sustainable Energy Future

Geomechanics at Well and Field Scale

By EnergyEdge - Training for a Sustainable Energy Future

Search By Location