Name: Essential CPRI
Price: 3497 GBP
Availability: InStock

<div>
</div>
<section>
<div>
<h2><strong>About this Virtual instructor Led Training (VILT)</strong><em> </em></h2>
<p>The Subsea Production Engineering Virtual instructor Led Training (VILT) course provides an overview of all of the functionalities and key interfaces of subsea equipment. The VILT course will refer to relevant industry engineering standards for subsea equipment, subsea tie-backs and critical operational requirements. The sessions will cover challenges associated with equipment design and installability, as well as a new module on subsea tie-backs.</p>
<p>The primary learning objectives for this VILT course are met through a combination of interactive presentations, discussion and exercises.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>By the end of this VILT course, participants will be able to:</p>
<ul>
<li>Apply the requirements of related industry standards (API 6A/ 17D, API 17A etc.) engineering standards</li>
<li>Understand the barrier and qualification requirements</li>
<li>Identify the barriers in place given a specific mode of operation</li>
<li>Evaluate and select which tree alternatives are valid based on the key design drivers</li>
<li>Identify and describe the key design drivers</li>
<li>Explain the importance of well kill rate</li>
<li>Describe which tree alternatives are valid for certain scenarios based on an evaluation of the key tree design requirements</li>
<li>Examine what effects subsurface requirements may have on tree design</li>
<li>Understand the challenges associated with designing equipment for manufacturability and installability</li>
<li>Recognise the implications of design changes to specific components and the effects on transportation and installation (such as what type of vessels, lifting equipment, and tools to use and the logistical requirements)</li>
<li>Recognise the implication of design changes on manufacturability of subsea equipment</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>This VILT course provides a comprehensive understanding of the equipment used in subsea production systems. It is designed for <strong>petroleum engineers, production engineers, subsea project engineers and is also highly suitable for cost, planning, offshore installation and offshore operations engineers</strong>.</p>
<p>Anyone directly or indirectly involved with subsea equipment will benefit from attending this VILT course - from engineers installing the equipment to procurement staff looking to understand more.</p>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p>The VILT course will be delivered online in <strong>4 half-day sessions comprising</strong> <strong>4 hours per day</strong>, with 2 breaks of 10 minutes per day.</p>
<p>Course Duration: 4 half-day sessions, 4 hours per session (16 hours in total).</p>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Most of his working life, your expert course leader has been in a role that has enabled him to pass on skills and knowledge to others. A full-time role in Training and Development came about in 1996 with the offer to take up a full-time teaching post at Aberdeen College. In 1998, he was recruited by Kvaerner Oilfield Products, an Oil &amp; Gas industry company, specialising in Subsea Control Systems, to develop and implement a Training &amp; Competence program acceptable for its staff of over 600 and their client companies - a challenge he could not resist. In 2003, he broadened his horizons and became an independent Training &amp; Development consultant. Building a reputation for delivering training and development to the Oil &amp; Gas industry to the highest standards, he later joined Jee Ltd, a leading subsea engineering and training company based in Aberdeen. He was tasked with a wide portfolio of training, coaching &amp; mentoring to achieve high levels of<br />
competence for the client's staff and customers.</p>
<p>He is also a Science and Engineering Ambassador (Scotland), promoting the need for engineers and technicians for Scotland's industries, a frequent consultant to the European Economic &amp; Social Committee for standardising Vocational Skills training and competence throughout the EU. He holds memberships in the Society of Operations Engineers, Chartered Institute of Personnel &amp; Development and Society of Underwater Technologies.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information about post training coaching support and fees applicable for this.</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

EnergyEdge - Training for a Sustainable Energy Future

Renewable Energy

Oil & Gas

Subsea Production Engineering - Incorporating Subsea Tie-backs - Virtual Instructor Led Training

Team of 10, pp

Normal Fee, pp

Stoke on Trent

<h2>Course Details</h2><p>This course covers relevant health and safety laws including Lifting Operations and Lifting Equipment Regulations 1998 (LOLER).

ð Course Contents
Health and safety legislation
Health and Safety at Work Act 1974
Lifting Operations and Lifting Equipment Regulations 1998 (LOLER)
Provision and Use of Work Equipment Regulations 1998 (PUWER)
Management of health and safety regulations
Inspection definitions and general lifting procedures
Marking of lifting equipment
Safe use of wire ropes
Sling loads and angles
Safe use of fabric and chain slings, shackles and eyebolts
Establishing load weight and center of gravity

If no dates are available please call the team on 01782 438813 for available dates.</p>

You Can Do It .Training

Construction Safety

Lifting Operations & Lifting Equipment Regulations (LOLER)

Site Management Safety Training Scheme (SMSTS)

Lifting & Handling

Banksman

Lifting Operations

Lifting Equipment Inspection

This course covers relevant health and safety laws including Lifting Operations and Lifting...

Slinger Banksman (On-Site)

General Admission

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>Managing process hazards in the hydrocarbon and chemical processing industries is a critical function that requires relevant knowledge and skills due to the risks involved. The Advanced Process Safety Engineering course will discuss the interrelation of the various techniques of process safety for analysing, with a particular emphasis on engineering design aspects, as well as how to manage process hazards in a safe and effective way and how they can potentially be avoided.</p>
<p>In this 3 full-day advanced level course, the expert course leader will provide participants with insights and examples from his career and experience to show how their learning should be applied in real-life situations. Feedback and questioning is highly encouraged. Reference material and reports can be provided to give more information on any particular topic of interest. Individual and group exercises, tutored exercises and video case studies will be provided throughout the course to underpin the key learning points.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>Upon completion of this course, participants will acquire in-depth knowledge of:</p>
<ul>
<li>Risk management and 'As Low as Reasonably Practicable' (ALARP) principles.</li>
<li>Different aspects of process design that influence process safety.</li>
<li>Approach to 'inherently safer' design.</li>
<li>Defence in depth using 'layers of protection'.</li>
<li>Process for ensuring the technical integrity of safety-critical equipment.</li>
<li>Hazards associated with process materials.</li>
<li>Range of hazard identification and consequence modelling techniques.</li>
<li>Causes and mitigation of human error.</li>
<li>Reliability and availability of safety-critical protection equipment.</li>
<li>Role of engineered safety-critical equipment and systems.</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>This course is suitable for industry professionals who need to acquire a comprehensive understanding of process safety. This includes those who are required to make managerial decisions where process safety is a key consideration, those who are moving into process safety positions or those who wish to broaden their process safety knowledge within their existing discipline.</p>
<p>It is particularly suited for anyone involved in the design, operation, modification or maintenance of a major hazard installation, and will demonstrate a substantial understanding of process safety for those engaged in Continuous Professional Development or aiming for Chartered Engineer status.</p>
<p>This course will benefit professionals such as:</p>
<ul>
<li>Operations and maintenance supervisors</li>
<li>Process, mechanical and chemical engineers and technicians</li>
<li>Design engineers, project engineers and HSE managers</li>
<li>Control, automation and instrumentation engineers</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Advanced</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your expert course leader has 50 years' experience in chemical and process safety engineering. His early career included 20 years in design and project engineering with various fine chemical and pharmaceutical companies where he designed chemical processes, specified plant equipment and selected materials for highly corrosive and toxic processes, often where textbook data was not available. This was followed by 10 years in offshore oil and gas design projects where he was responsible for setting up a Technical Safety group to change design safety practices in the aftermath of the 1988 Piper Alpha disaster. In recent years, he has been called upon to conduct various offshore and onshore incident investigations.</p>
<p>His career has given him experience in project engineering, project management, process design and operations, safety engineering and risk management. He is a Fellow of the UK Institution of Chemical Engineers. He served on the Scottish Branch committee, and was elected chairman for a two-year term in 1991. He has also been chairman of the Safety and Reliability Society - North of Scotland Branch.</p>
<p>He has delivered training courses in Process Hazard Analysis (HAZOP and HAZID), Process Safety Management, Hazard Awareness, Risk Assessment, Root Cause Analysis, Failure Modes &amp; Effect Analysis and has lectured on Reliability Analysis to the M.Sc. course in Process Safety and Loss Prevention at Sheffield University. In addition to delivering training courses, he currently facilitates HAZOP / HAZID / LOPA studies and undertakes expert witness roles advising lawyers engaged in contractual disputes, usually involving the design or construction of chemical plants or Oil &amp; Gas production facilities, or criminal prosecutions.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Advanced Process Safety Engineering

<div>
</div>
<section>
<div>
<h2><strong>About this Virtual Instructor Led Training (VILT)</strong></h2>
<p><span>This course will provide a comprehensive, foundational content for a wide range of topics in power system operation and control. With the growing importance of grid integration of renewables and the interest in smart grid technologies, it is more important than ever to understand the fundamentals that underpin electrical power systems.</span></p>
<p><span>This course provides a thorough understanding of all basic terminology and concepts of electrical systems, structure of a power system, transmission line parameters, insulators, high-voltage direct current transmission, substation and neutral grounding, distribution system, circuit breakers, relaying and protection, power system stability, economic operation of power systems, load frequency control, voltage and reactive power control, renewable energy sources, restructuring of electrical power systems, and smart grids.</span></p>
<p><span>This course is a MUST for practitioners, consultants, engineers of all disciplines, managers, technicians and all technical personnel who need to learn about electrical power systems.</span></p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong>Basic Terminology and Concepts of Electrical Systems:</strong> Gain an understanding of the basic terminology and concepts of electrical systems and the structure of a power system</li>
<li><strong>Transmission Line Parameters:</strong> Learn in detail all the transmission line parameters including line resistance, line inductance, transposition of transmission lines, and capacitance of transmission lines</li>
<li><strong>Insulators:</strong> Understand thoroughly all the various types of insulators, pin type insulators, suspension type or disc insulators, strain insulators, and testing of insulators</li>
<li><strong>High-Voltage Direct Current Transmission:</strong> Determine the advantages and disadvantages of high voltage direct current transmission, and gain an understanding of all the features of high-voltage direct current transmission</li>
<li><strong>Substations and Neutral Grounding:</strong> Gain a detailed understanding of all substation equipment, factors governing the layout of substations, station transformers, elements to be earthed in a substation, power system earthing, earthing transformers, bus bar arrangements and gas-insulated substations</li>
<li><strong>Distribution System:</strong> Learn about the effects of voltage on the conductor volume, distributor fed from one end, distributors fed from both ends at the same voltage, distributors fed from both ends at different voltages, and alternating current distribution</li>
<li><strong>Circuit Breakers:</strong> Learn about the classification of circuit breakers, plain-break oil circuit breakers, air break circuit breaker, air blast circuit breakers, vacuum circuit breakers, SF6 circuit breakers, rating and testing of circuit breakers</li>
<li><strong>Relaying and Protection:</strong> Learn all the requirements of relaying, zones of protection, primary and backup protection, classification of relays, electromagnetic relays, induction relays, feeder protection, phase fault protection, reactance relay, static overcurrent relay, differential protection, transformer protection, Buchholz relays, alternator protection restricted earth fault protection, rotor earth fault protection, and negative-sequence protection</li>
<li><strong>Economic Operation of Power Systems:</strong> Gain an understanding of steam power plants, heat rate characteristics and characteristics of hydro plants</li>
<li><strong>Load Frequency Control:</strong> Learn about speed governing mechanism, speed governor, steady state speed regulations and adjustment of governor characteristics</li>
<li><strong>Voltage and Reactive Power Control:</strong> Gain an understanding of impedance and reactive power, system voltage and reactive power, voltage regulation and power transfer</li>
<li><strong>Renewable Energy Sources:</strong> Learn about solar power, wind power, geothermal energy, biomass and tidal power</li>
<li><strong>Restructuring of Electrical Power Systems:</strong> Gain an understanding of smart grids, smart grid components, smart grid benefits, and open smart grid protocol</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li>Engineers of all disciplines</li>
<li>Managers</li>
<li>Technicians</li>
<li>Maintenance personnel</li>
<li>Other technical individuals</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><strong>The VILT will be delivered online in 5 half-day sessions comprising 4 hours per day, with 2 x 10 minutes break per day</strong>, including time for lectures, discussion, quizzes and short classroom exercises.</p>
<p>Additionally, some self-study will be requested. Participants are invited but not obliged to bring a short presentation (10 mins max) on a practical problem they encountered in their work. This will then be explained and discussed during the VILT. A short test or quiz will be held at the end the course.</p>
<p>The instructor relies on a highly interactive training method to enhance the learning process. This method ensures that all the delegates gain a complete understanding of all the topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>'ELECTRICAL EQUIPMENT HANDBOOK' published by McGraw-Hill in 2003 (600 pages)</span></li>
<li><span>Introduction to Power Systems Manual (500 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories.</p>
<p>While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment.</p>
<p>Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations.</p>
<p>In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures.</p>
<p>He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information about post training coaching support and fees applicable for this.</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Introduction to Power Systems

Redhill

<h3><b>Transmission demystified training course description</b></h3> 
				<p>Transmission is the process of sending information along a medium of, copper, fibre or wireless. This course looks at transmission techniques for both telecommunications and data communications with a particular focus on Microwave, SDH, DWDM transmission. The course aims to demystify these technologies by explaining all the buzzwords used in transmission.</p>
        
				<h5><b>What will you learn</b></h5>
				<ul>
				 
          <li>Describe various transmission technologies such as multiplexing and demultiplexing.</li>
					<li>Explain how Microwave works.</li>
                    <li>Explain how SDH works.</li>
                    <li>Explain how DWDM works.</li>
                   
                  </ul>
       
        <h5>
        <b>Transmission demystified training course details</b> </h5>
				<div>
					<div>
						<ul>
							<li><b> Who will benefit:</b> </li>
							
              <p>Anyone working in telecommunications.</p>
              
							<li><b>Prerequisites:</b></li>
							
              <p>None.</p>
              
							<li><b>Duration</b></li>
							
              <p>2 days
						</p>
              
							
              
              
						</ul>
					</div>
				</div>
      <h3><b>Transmission demystified training course contents</b></h3>
      <ul>
				<li>Transmission basics</li><p>
Systems, media, signals. Signal degradation, noise, distortion, attenuation. Digital, analogue. Modulation, encoding.

</p><li>RF</li><p>
Frequency, wavelength. Distance / range issues, interference, Antenna, power, dB, RF propagation, testing.

</p><li>Microwave transmission</li><p>
What is microwave transmission, point to point communications, line of sight, parabolic antenna, relays, planning considerations, rain and other issues

</p><li>Wired transmissions</li><p>
Copper, Fibre, optical transmission, fibre characteristics, fibre component parts. Multi Mode Fibre (MMF). Single Mode Fibre (SMF). Fibre connections. Lasers. Attenuations, dispersion, optical signal noise ratios (OSNR) and their effects. Channel Spacing and Signal Direction. Limiting factors to single wavelength.

</p><li>Introduction to SDH</li><p>
Timing and synchronisation of digital signals, the plesiochronous digital hierarchy (PDH), the synchronous digital hierarchy (SDH), service protection with SDH. TDM.

</p><li>SDH6</li><p>
Standards, basic units, frames, STM1 frame, bit rates, STM0, STM1, STM4, STM16, STM64, STM256, SDH architecture, rings, Add drop multiplexors. SDH network topologies, structure of SDH equipment, SDH synchronisation, protection switching in SDH networks, SDH alarm structure, testing of SDH, equipment and systems, Ethernet over SDH.

</p><li>WDM overview</li><p>
Multiplexing, TDM, WDM benefits. WDM standards. CWDM vs. DWDM. Four Wave Mixing (FWM). Impact and countermeasures to FWM on WDM.tructure of SDH equipment, SDH synchronisation, protection switching in SDH networks, SDH alarm structure, testing of SDH, equipment and systems, Ethernet over SDH.

</p><li>DWDM</li><p>
ITU G.694.1, channel and spacing. Optical Terminal Multiplexers (OTM). Optical Add/Drop Multiplexers (OADM). Adding versus dropping. Optical Amplifiers. Erbium Doped Fibre Amplifiers (EDFA). Transponders and Combiners. Optical and Electrical Cross Connects (OXCs/DXCs). Cross Connect types (Transparent/Opaque). Advantages and disadvantages of various Optical cross connects.

	</p><li>IP transmission</li><p>
Telecommunications versus data communications, IP transmission, VoIP, MPLS.
</p>
      </ul>

Systems & Network Training

Network & Security

Network Engineer

Transmission demystified

<h3><b>SDH training course description</b></h3>
      <p>Our SDH training course is designed for those with a basic knowledge of the principles of telecommunication digital transmission techniques. An overview of the existing transmission hierarchies and their limitations is provided with an introduction to the Synchronous Digital Hierarchy (SDH). The advantages of SDH are explained fully.</p>
        
				<h5><b>What will you learn</b></h5>
				<ul>
				 
  <li>Identify the major limitations of the PDH network.</li>
					<li>Outline the advantages of using the SDH.</li>
                    <li>Illustrate the various SDH equipment and network topologies.</li>
                    <li>Describe the principles of the SDH multiplexing structure. </li>
                  </ul>
        <h5>
        <b>SDH training course details</b> </h5>
				<div>
					<div>
						<ul>
							<li><b> Who will benefit:</b> </li>
							
              <p>Anyone working with SDH.</p>
              
							<li><b>Prerequisites:</b></li>
							
              <p>It should be noted that this course will assume some basic telecommunication transmission knowledge from the delegates attending. This may be accomplished by attending the Introduction to Telecommunications course.</p>
              
							<li><b>Duration</b></li>
							
              <p>2 days
						</p>
              
							
              
              
						</ul>
					</div>
				</div>
      <h3><b>SDH training course contents</b></h3>
      <ul>
				<li>Introduction to SDH </li><p>
Timing and synchronisation of digital signals, the plesiochronous digital hierarchy (PDH), the synchronous digital hierarchy (SDH), service protection with SDH

</p><li>SDH Multiplexing Techniques </li><p>
The multiplexing principles of SDH, mapping and aligning a 2Mbit/s tributary into a TU-12, aligning the VC-12 in a TU-12, multiplexing TU-12's into a TUG-2, multiplexing TUG-2's into a TUG-3, multiplexing TUG-3's into a VC-4, the VC-4 path overhead, the STM-1 frame, the AU-4 pointer, the STM-1 section overheads, multiplexer section protection, transmission at rates higher than STM-1, concatenation line transmission functions in SDH

</p><li>SONET Multiplexing Techniques </li><p>
Mapping a DS1 tributary into a virtual tributary, aligning the VT-SPE into a VT frame, mapping the VTGs into a STS-1 SPE, the STS-1 synchronous payload envelope, the STS-1 frame SONET network sections and lines transmissions at higher rates than STS-1

</p><li>SDH Functions and Facilities </li><p>
SDH network topologies, structure of SDH equipment, synchronisation of SDH networks, protection switching in SDH networks, SDH alarm structure, SDH performance monitoring, testing of SDH, equipment and systems, network management and SDH, asynchronous transfer mode (ATM), future services and technologies

</p><li>OSI Telecommunications Network Management </li><p>
Definition of network management, managing telecom equipment, the managed object library, the management information base, the telecommunications management network (TMN), the Q3 protocol.</p>
      </ul>

SDH foundation

<p id="isPasted"><strong><span>Course Overview:</span></strong></p><p><span>The "People Handling Instructor and Assessor Training" course is designed to equip healthcare professionals and educators with the necessary skills and knowledge to become certified instructors and assessors in safe people handling techniques. This comprehensive course covers the principles of safe manual handling, risk assessment, instructional techniques, and assessment methods, enabling participants to effectively train and assess others in the proper methods of lifting, transferring, and supporting individuals.</span></p><p><span><br /></span></p><p><span><strong>Course Duration:</strong> </span></p><p><span>2 days (16 Hours)</span></p><p><span><br /></span></p><p><span><strong>Course Content:</strong></span></p><p><span>By the end of this course, participants will be able to:</span></p><p id="isPasted"><span>The overleaf named individual has demonstrated their knowledge, understanding and skill to deliver a range of People Handling courses including the following key topics:</span></p><p><span>1. Legislation (HASAWA, MHSR, MHOR, LOLER, PUWER, RIDDOR</span></p><p><span>2. National standards and guidelines</span></p><p><span>3. Biomechanics, posture, flexion and twisting (REBA)</span></p><p><span>4. How to risk assess and introduce suitable and sufficient control measures using E.L.I.T.E / T.I.L.E.E.O safe principles and the Hierarchy of Control</span></p><p><span>5. How to choose and use the correct equipment safely including mechanical and non-mechanical standing aids, hoists, and slide sheets</span></p><p><span>6. Condemned and dangerous moves</span></p><p><span>7. Practical skills including sit, stand, walk (with and without equipment), bed manoeuvres (with and without equipment) and hoisting </span></p><p><span>8. Teaching skills</span></p><p><span><br /></span></p><p id="isPasted"><span><strong>Course Objectives:</strong></span></p><p><span>1. Comprehend People Handling Principles: Understand the importance of safe and ergonomic people handling techniques in maintaining the well-being of both caregivers and individuals with mobility challenges.</span></p><p><span>2. Master Instructional Techniques: Develop instructional skills to effectively teach people handling techniques, including proper body mechanics, equipment usage, and communication.</span></p><p><span>3. Assess Competency: Gain proficiency in assessing learners' performance in performing safe people handling techniques and providing constructive feedback.</span></p><p><span>4. Prioritise Risk Assessment: Learn how to conduct risk assessments, identify potential hazards, and implement preventive measures to ensure safety during people handling.</span></p><p><span>5. Promote a Culture of Safety: Understand the role of instructors and assessors in promoting a culture of safety, adherence to protocols, and continuous improvement.</span></p><p><span><br /></span></p><p><span><strong>Assessment and Certification:</strong></span></p><p><span>Participants will be assessed through written assessments, practical demonstrations, teaching sessions, and potentially a portfolio of evidence. Successful completion will lead to certification as a qualified "People Handling Instructor and Assessor."</span></p><p id="isPasted"><span><strong>Note: This course overview is a general guideline and can be customised to suit specific local requirements and preferences, therefore, we recommend that you contact us to discuss your requirements prior to making a booking.</strong></span></p>

Guardian Angels Training

Gain certification as a safe people handling instructor and assessor with our comprehensive course. Equip yourself with the necessary skills and knowledge to effectively train and assess others in safe manual handling techniques.

People Handling Instructor and Assessor

<h3><b>GSM training course description</b></h3>
      <p> GSM is in widespread use today. This seminar gives an comprehensive overview of GSM.</p>
        
				<h5><b>What will you learn</b></h5>
				<ul>
				 
				 <li>Explain what GSM is.</li>
					<li>Describe the architecture of the GSM network.</li>
                    <li>Describe the GSM protocol stack.</li>
                  </ul>
        <h5>
        <b>GSM training course details</b> </h5>
				<div>
					<div>
						<ul>
							<li><b> Who will benefit:</b> </li>
							
              <p>Anyone who needs to know more about GSM. </p>
              
							<li><b>Prerequisites:</b></li>
							
              <p>Telecommunications Introduction</p>
              
							<li><b>Duration</b></li>
							
              <p>2 days
						</p>
              
							
              
              
						</ul>
					</div>
				</div>
      <h3><b>GSM training course contents</b></h3>
      <ul>
				<li>Introduction </li><p>
History of GSM, analogue networks, digital
networks, PCS1900.
</p><li>GSM services </li><p>
Telephony, digital encoding, data rates, Group 3
fax, SMS, Supplementary services.
</p><li>GSM architecture </li><p>
Mobile station
Mobile Equipment (ME), Subscriber Identity
Module (SIM).
</p><li>Base Station Subsystem </li><p>
Base Transceiver Station (BTS), Base Station
Controller (BSC).
</p><li>Network Subsystem </li><p>
Mobile Services Switching Centre (MSC), Home
Location Register (HLR), Visitor Location Register
(VLR), Equipment Identity Register (EIR), Visitor
Location register (VLR), Authentication Centre
(AuC)
</p><li>Radio Link Aspects </li><p>
Bands, FDMA, TDMA, Traffic channels, Control
channels, Speech coding, Channel coding and
modulation, Multipath equalisation, Frequency
hopping.
</p><li>GSM signalling </li><p>
SS7 overview, GSM SS7 nodes, Base Station
Subsystem Application Part (BSSAP), Transaction
Capabilities Application Part (TCAP), Mobile
Application Part (MAP).
</p><li>Interfaces </li><p>
Um, Abis and A interfaces.
</p><li>Mobility and call processing in GSM </li><p>
Attach &amp; location update process, mobile
originate, mobile termination, handovers.
</p><li>GSM services </li><p>
Tele services, Bearer services, supplementary
services, SMS, security.
</p><li>GSM futures </li><p>
GPRS, UMTS. 
</p>
      </ul>

Total GSM

Oswestry

<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">This is the level 3 qualification for hire desk supervisors and hire managers who wish to gain a formal qualification. &nbsp;This qualification is also the basis of the Hire Association Europe (HAE) Management and Leadership Programme.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">This qualification is for those who work with equipment including:</p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Tool and equipment hire</li><li fr-original-style="" style="box-sizing: border-box;">Mobile plant</li><li fr-original-style="" style="box-sizing: border-box;">Lifting equipment and cranes</li><li fr-original-style="" style="box-sizing: border-box;">Powered Access equipment</li><li fr-original-style="" style="box-sizing: border-box;">Surfacing and asphalt equipment</li></ul><div fr-original-style="" style="box-sizing: border-box;"><span style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">It is assessed in the workplace i.e. we come to you whether that be at your workshop or site. &nbsp;See our FAQs below for more information on how the process works.</span></div><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The overview from NOCN Awarding Body:</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The NOCN_Cskills Awards Level 3 NVQ Diploma in Supervising Hire and Rental Operations -Equipment, Plant and Tools(Construction) qualification has been developed for achievement in a real workplace environment which means the learner must be employed to undertake this qualification.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">This qualification enables the learner, to recognise their skills, knowledge and understanding as well as demonstrating their competence in the workplace when carrying out the role of a specialist in the hiring of construction plant and/or tools and equipment to customers, co-ordinating work activities and supervising hire staff in the workplace within the construction industry.</p>

Learning for Hire Limited

Construction Engineering

360 Excavator

NOCN NVQ Level 3 Diploma in Supervising Hire and Rental Operations

General admission

<h3><b>CPRI training course description</b></h3>
      <p> This course is designed to give the delegate a technical overview of the CPRI protocols and link setup. We will explain the industry cooperation to define the key internal interface between the radio equipment control (REC) and the radio equipment (RE).
Also explained will be the SAP that the CPRI link supports for IQ Interface, frame synchronisation, link control and management and the master and slave ports.
We will investigate the CPRI block diagram and together with the data formats and sample mapping solutions. The CPRI frame hierarchy and hyperframe construction will be detailed during this three day overview course.</p>
        
				<h5><b>What will you learn</b></h5>
				<ul>
				 
				 <li>Explain the CPRI Block diagram.</li>
					<li>Understand hyperframing capabilities.</li>
                    <li>Explain the CPRI frame format.</li>
                    <li>Understand how the synchronisation is compliant with 3GPP &amp; WiMAX requirements.</li> 
                    
                    <li>Understand the two electrical characteristics of CPRI standard.</li>
					<li>Understand the CPRI standards structure.</li>
                    <li>Understand the CPRI system &amp; Interface definitions.</li>
                    <li>List the four standard bit rates of the CPRI specification.</li>
                     <li>Understand the CPRI Protocol stacks.</li>
                  </ul>
        <h5>
        <b>CPRI training course details</b> </h5>
				<div>
					<div>
						<ul>
							<li><b> Who will benefit:</b> </li>
							
              <p>Anyone looking for a technical overview of the CPRI protocols and link set up. </p>
              
							<li><b>Prerequisites:</b></li>
							
              <p>None.</p>
              
							<li><b>Duration</b></li>
							
              <p>3 days
						</p>
              
							
              
              
						</ul>
					</div>
				</div>
      <h3><b>CPRI training course contents</b></h3>
      <ul>
				<li>System Description </li><p>
Subsystems. Nodes. Protocol layers. Protocol data planes. User data planes. Antenna carriers. Service Access Points (SAP). Link. Passive Link. Hop. Multi-hop Connection. Logical Connection. Master Port &amp; Slave Port.

</p><li>System Architecture </li><p>
Basic System Architecture &amp; Common Public Radio Interface Definition. System Architecture with a link between Res. Reference configurations: Chain topology, Tree topology, Ring topology. RECs &amp; REs in both chain &amp; tree topology

</p><li>Functional description </li><p>
Radio Functionality. Functional Decomposition between REC and RE: For UTRA FDD, For WiMAX &amp; E-UTRA, For GSM. CPRI Control Functionality.

</p><li>Interface Baseline </li><p>
Interface Specification. Protocol Overview. IQ Data. Synchronisation. L1 Inband Protocol. C &amp; M Data. Protocol Extensions. Vendor Specific Information.

</p><li>Physical Layer Specifications </li><p>
Line Bit Rate. Physical Layer Modes. Electrical Interface. Optical Interface. Line Coding. Bit Error Correction/Detection. Frame Structure. Mapping Methods. Container Blocks. Hyperframes. GSM, UMTS &amp; WiMAX Timing. Link Delay Accuracy &amp; Cable Delay Calibration. Link Maintenance

</p><li>Data Link Layer (Layer 2) Specification </li><p>
Layer 2 Framing for Fast &amp; Slow C &amp; M Channels. Medium Access Control/Data Mapping. Flow Control.

</p><li>Start-up Sequence </li><p>
General. Layer 1 Start-up Timer. State Description. Transition Description.

</p><li>Interoperability </li><p>
Reserved Bandwidth. Version Numbers.

</p><li>Supplementary Specification Details </li><p>
Delay Calibration Example. Reference Test Points.

</p><li>List of Abbreviations &amp; Gloss </li>
      </ul>

Essential CPRI

<p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><b style="color: rgb(26, 26, 26); box-sizing: border-box;" fr-original-style="color: rgb(26, 26, 26);">This driver CPC course - Customer Service &amp; Manual Handling</b><b style="color: rgb(26, 26, 26); box-sizing: border-box;" fr-original-style="color: rgb(26, 26, 26);"> is suitable for LGV &amp; PCV and will cover:</b></p><p style="color: rgb(26, 26, 26); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(26, 26, 26);">Company &amp; Driver Image,&nbsp;Who Customers Are and What They Want,&nbsp;Communication Skills,&nbsp;Giving Good Customer Service,&nbsp;About Manual Handling,&nbsp;The Spine,&nbsp;Manual Handling Injuries and Their Costs,&nbsp;Regulations,&nbsp;Manual Handling Risk Assessment,&nbsp;Safe Handling Techniques,&nbsp;Manual Handling Equipment.</p><p style="color: rgb(26, 26, 26); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(26, 26, 26);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">All courses start at 07:45 hrs and finish at 15:45 hrs</strong></p><p style="color: rgb(26, 26, 26); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(26, 26, 26);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">All courses are 8 hours long with included 2 breaks of 15 minutes and a lunch break of 30 minutes.</strong></p><p style="color: rgb(26, 26, 26); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(26, 26, 26);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Approval:</strong> This course is registered with JAUPT as approved for Driver CPC qualification.</p><p style="color: rgb(26, 26, 26); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(26, 26, 26);">Course Approval Number: CRS18242/475.</p><p style="color: rgb(26, 26, 26); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(26, 26, 26);">On completion of the course all attendees will receive certificate of attendance.</p><p style="color: rgb(26, 26, 26); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(26, 26, 26);">Please note repeat courses are not accepted by DVSA and by joining this course you confirm that you are aware of the modules covered by you and certify that, if you have covered these before you are happy to repeat the modules due to needing further education on the subject.</p>

This driver CPC course - Rules of the Road & Manual Handling is suitable for LGV & PCV and will cover:
Requirements, Speed Limits, SMART Motorways, Highway Code, Road Signs, Bridge Strikes, Mobile Phones, Sat-Navs, Traffic Accident Procedure, About Manual Handling, The Spine, Manual Handling Injuries and Their Costs, Regulations, Manual Handling Risk Assessment, Safe Handling Techniques, Manual Handling Equipment.
All courses start at 07:45 hrs and finish at 15:45 hrs
All courses are 8 hours long with included 2 breaks of 15 minutes and a lunch break of 30 minutes.
Approval: This course is registered with JAUPT as approved for Driver CPC qualification.
Course Approval Number: CRS18242/475.
On completion of the course all attendees will receive certificate of attendance.
Please note repeat courses are not accepted by DVSA and by joining this course you confirm that you are aware of the modules covered by you and certify that, if you have covered these before you are happy to repeat the modules due to needing further education on the subject.

PETM

HGV Driver

7.5 Ton Driver

Manual Handling

Driver CPC

Rules of the Road & Manual Handling - Online

Swansea

ONLINE STUDY + ONE DAY ZOOM SESSION
NO CLASSROOM ATTENDANCE REQUIRED


Awarding Body: Dual Accreditation - Open College Network (OCN Credit4Learning) & The CPD Certification Service (21 CPD Points)
 
Award Level: UK - Level Three (Advanced) + 21 CPD Points
Ireland Level Five (Advanced) + 21 CPD Points
 
Minimum Age: 18 (16 with parental consent)
 
Entry requirements: None. English Level 2 desirable
 
Training Locations: Study online + virtual classroom.
 
Practical Training: Includes FREE Practise@Home Phlebotomy Training Kit worth £79.99
This comprehensive 76 piece practical training kit includes mini-arm trainer, sharps container and all medical grade supplies needed as well as a step-by-step 30 minute training video.



PART 1 (THEORY) - STUDY AT HOME ONLINE :
Complete your theory training online in the comfort of your own home or at work. Stop/start when it suits you and complete the online modules at your own pace. Can be completed on multiple devices such as laptop, smart-phone, desktop computer, kindle, tablet etc.
 
PART 2 (PRACTICAL SESSIONS) - JOIN US FOR A COMPREHENSIVE ONE DAY ZOOM SESSION:
Full instructions will be provided. We will send you a completely free Practise@Home Phlebotomy Training Kit, including a mini-arm trainer, for you to keep. You will follow your tutor's on-screen instructions during your Zoom virtual classroom sessions as you learn and develop your phlebotomy skills. The procedures and practices taught online are exactly the same as you would learn in the classroom. At any time before or after your course you can watch our 30 minute step-by-step video to refresh your knowledge and continue to use your training kit to practice your skills.
 
(THIS COURSE AWARDS THE SAME NATIONALLY RECOGNISED AND DUALLY ACCREDITED QUALIFICATION AS OUR CLASSROOM AND HYBRID COURSE VERSIONS)


Please make sure you verify the precise dates and timings of your course when you receive your booking confirmation, as it may vary from the information provided above.


COURSE ITINERARY

 
A dually-accredited hybrid modular venepuncture course awarding an
OCN Accredited Level Three Certificate (3 credits) & 21 CPD Points


Nationally Recognised Qualification


Part 1 - online (eLearning) Part 2 - Virtual Classroom (1 Day Zoom)


PRE-COURSE
Home study pack - download and complete before the virtual classroom sessions

PART 1 - ONLINE
M01: Course Overview
M02: History, Definitions and Roles
M03: Work-flow cycles
M04: Professionalism
M05: Health & Safety
M06: Blood Collection Systems
M07: Anatomy & Physiology
M08: Blood Composition
M09: Using the equipment
M10: Performing the venepuncture - see Classroom Part 2
M11: Lab Tests and Bottle Types
M12: Analytical Errors
M13: Informal Quiz – answers
M14: Award – accredited certificates, value, application and overview. Job Opportunities.


PART 2 - VIRTUAL CLASSROOM (ONE DAY ZOOM SESSION)
M01: Introduction: Welcome, Introductions and Overview.
M10: Performing the venepuncture (theory overview)
P01: Practical Session 1 – Equipment familiarisation - "Tools of the Trade"
P02A: Practical Session 2A – Unpacking your training kit
P02B: Practical Session 2B - A look at the mini-arm trainer and associated equipment
P03: Practical Session 3 – Using the tourniquet and identifying a vein
P04: Practical Session 4 – Handling and assembling the equipment. Familiarisation and procedures including initial skill-set development
P05: Practical Session 5 - Further skill-set development and consolidation. Discussing needle types including winged infusion sets (butterfly needles)
P06A: Practical Session 6A – Performing the venepuncture on the mini-arm trainer. Palpating the vein, performing the venepuncture. Sample handling and labelling.
P06B: Practical Session 6B – Consolidating pre- and post-venepuncture procedures.
 
Additional support material can be downloaded as you progress through the course online.





ZOOM SESSION

VIRTUAL CLASSROOM (ZOOM) SESSIONS 
Our Virtual Classroom training course consists of online study (Part 1 - theory) and Virtual Classroom Zoom sessions (Part 2 - practical skill-set development)
You must complete your Part 1 online study before joining us for your Zoom session(s).
Once you have enrolled on this course you will be sent a free Practise@Home Training Kit, This is yours to keep and can be reused any many time as you wish after you have completed the course.
Your Booking Confirmation will include your Zoom log-in details.



Geopace Training

Allied Health

Allied Health Professions (AHP)

Blood Taking

Healthcare Workers

Venepuncture

Phlebotomist

Phlebotomy

Accredited Phlebotomy

Healthcare

Learn how to take blood ... train as a Phlebotomist

    Nationally Recognised Qualification

    No previous experience or qualifications needed

    OCN Accredited - Level 3 (advanced)

    CPD Accredited (The CPD Certification Service)

    Covers all steps up to live blood draw

    Practise on artificial arm and fake blood!

    Basic understanding of English language required

    OPEN TO ALL APPLICANTS


Introduction to Phlebotomy Course (GPT003VC) - 1 DAY Virtual Classroom

<div id="course-pills-1">Duration<p>2 Days</p><p>12 CPD hours</p>This course is intended for<p>The primary audience for this course is any IT, facilities or data centre professional who works in and around the data centre and who has the responsibility to achieve and improve the availability and manageability of the data centre.</p>Overview<p>After completion of the course the participant will be able to:? Choose an optimum site for mission-critical data centre based on current and future needs? Describe all components that are important for high availability in a data centre and how to effectively setup the data centre? Name and apply the various industry standards? Describe the various technologies for UPS, fire suppression, cooling, monitoring systems, cabling standards, etc, and to select and apply them effectively to cost-efficiently enhance the high-availability of the data centre.? Review the electrical distribution system to avoid costly downtime? Enhance cooling capabilities and efficiency in the data centre by using existing and new techniques and technologies for the increased cooling requirements of the future? Design a highly reliable and scalable network architecture and learn how to ensure installers apply proper testing techniques? Create effective maintenance contracts with equipment suppliers ensuring the best return on investment? Setup effective data centre monitoring ensuring the right people get the right message? Ensure proper security measures, both procedural and technical, are established to safeguard your company's valuable information in the data centre</p><p>The course will address how to setup and improve key aspects such as power, cooling, security, cabling, safety, etc., to ensure a high available data centre. It will also address key operations and maintenance aspects.</p></div><div id="course-pills-2"><h4>The Data Centre, it?s Importance and Causes for Downtime</h4><h4>Data Centre Standards and Best Practices</h4><h4>Data Centre Location, Building and Construction</h4><ul><li>Selecting appropriate sites and buildings and how to avoid pitfalls<br />Various components of an effective data centre and supporting facilities setup</li></ul><h4>Raised Floor/Suspended Ceiling</h4><ul><li>Uniform, concentrated and rolling load definitions<br />Applicable standards<br />Raised Floor guidelines<br />Signal Reference Grid, grounding of racks<br />Disability act and regulations<br />Suspended ceiling usage and requirements</li></ul><h4>Light</h4><ul><li>Standards<br />Light fixture types and placement<br />Emergency lighting, Emergency Power Supply (EPS)</li></ul><h4>Power Infrastructure</h4><ul><li>Power infrastructure layout from generation to rack level<br />ATS and STS systems<br />Redundancy levels and techniques<br />Three-phase and single-phase usage<br />Power distribution options within the computer room<br />Power cabling versus bus bar trunking<br />Bonding versus grounding<br />Common Mode Noise and isolation transformers<br />Distribution boards, form factors and IP-protection grades<br />Power quality guidelines<br />Real power versus apparent power<br />How to size and calculate load in the data centre Generators<br />Static and dynamic UPS systems, selection criteria, how they operate and energy efficiency option<br />Battery types, correct selection and testing<br />Thermo-graphics</li></ul><h4>Electro Magnetic Fields</h4><ul><li>Electrical fields and magnetic fields definitions and units of measurements<br />Sources of EMF<br />Effects of EMF on human health and equipment<br />(H)EMP<br />Standards<br />EMF shielding solutions</li></ul><h4>Equipment Racks</h4><ul><li>Rack standards, properties and selection criteria<br />Security considerations<br />Power rail/strip options</li></ul><h4>Cooling Infrastructure</h4><ul><li>Temperature and humidity recommendations<br />Cooling measurement units and conversion rates<br />Sensible and latent heat definitions<br />Differences between comfort and precision cooling<br />Overview of different air conditioner technologies<br />Raised floor versus non-raised floor cooling<br />Placement of air conditioner units and limitations to be observed<br />Supplemental cooling options<br />Cold aisle/hot aisle containment</li></ul><h4>Water Supply</h4><ul><li>Importance of water supply and application areas<br />Backup water supply techniques</li></ul><h4>Designing a Scalable Network Infrastructure</h4><ul><li>The importance of a Structured Cabling System<br />Planning considerations<br />Copper and Fiber cable technology and standards<br />ANSI/TIA-942 Cabling hierarchy and recommendations<br />Testing and verification<br />SAN storage cabling<br />Network redundancy<br />Building-to-building connectivity<br />Network monitoring system requirements</li></ul><h4>Fire Suppression</h4><ul><li>Standards for fire suppression<br />Detection systems<br />Various total flooding fire suppression techniques and systems, their benefits and disadvantages<br />Handheld extinguishers<br />Signage and safety<br />Regulatory requirements and best practices</li></ul><h4>Data Centre Monitoring</h4><ul><li>Data centre monitoring requirements<br />EMS versus BMS<br />Water leak detection systems<br />Notification options and considerations</li></ul><h4>Operational Security and Safety Practices</h4><ul><li>Data centre security layers<br />Physical, infrastructure and organisational security<br />Safety measures and essential signage</li></ul><h4>Labelling</h4><ul><li>Choosing a labelling scheme<br />Recommended labelling practices<br />Network labelling</li></ul><h4>Documentation</h4><ul><li>How to setup proper documentation<br />Document management policies and procedures</li></ul><h4>Cleaning</h4><ul><li>Cleaning practices for the data centre</li></ul><h4>MTBF/MTTR</h4><ul><li>Standards and definitions<br />Calculation models<br />The ?real? value</li></ul><h4>Maintenance Contracts/SLA/OLA</h4><h4>EXAM: Certified Data Centre Professional</h4></div><div id="course-pills-3"><h4>Additional course details:</h4><br /><p>Nexus Humans Certified Data Centre Professional (CDCP) training program is a workshop that presents an invigorating mix of sessions, lessons, and masterclasses meticulously crafted to propel your learning expedition forward. </p><p></p> This immersive bootcamp-style experience boasts interactive lectures, hands-on labs, and collaborative hackathons, all strategically designed to fortify fundamental concepts. <p></p>Guided by seasoned coaches, each session offers priceless insights and practical skills crucial for honing your expertise. Whether you're stepping into the realm of professional skills or a seasoned professional, this comprehensive course ensures you're equipped with the knowledge and prowess necessary for success.  <p></p>While we feel this is the best course for the Certified Data Centre Professional (CDCP) course and one of our Top 10 we encourage you to read the course outline to make sure it is the right content for you.  <p></p>Additionally, private sessions, closed classes or dedicated events are available both live online and at our training centres in Dublin and London, as well as at your offices anywhere in the UK, Ireland or across EMEA.<p></p></div>

Nexus Human

IT Certifications

Construction Design & Management (CDM)

Certified Cloud Security Professional (CCSP)

AWS Certified Cloud Practitioner

Certified in Data Protection (CDP)

Certified Cyber Professional (CCP)

Certified Data Centre Professional (CDCP)

<p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">A standalone 10-week course - 2 hours per week online with daytime and evening options - that will introduce you to the materials, tools, and techniques used in quilling and to Craft4Smiles C.I.C and our tutors. &nbsp; At the end of each session you will have a lovely quilled item to show family and friends or to display on your shelf! You will be told about the other courses we offer so that you can make an informed choice about further learning. Participants in this course often move on to our Introduction to Paper Craft and Mixed Media Course that will introduce you to the basic materials, tools, equipment and techniques used. Experience has shown us that participants for whom English is not their first language, have found that quilling has helped them improve their understanding and spoken English as there is a lot of repetition of basic terms including numbers, colours and directions. Working with someon for whom English is their first language is also helpful.&nbsp;</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Programme</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Week 1: Basic Shapes (1)</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Week 2: Basic Shapes and Use of a Quilling Comb (2)&nbsp;</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Week 3: Flower and Butterfly: Picture 8&rdquo; x 10&rdquo;</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Week 4: Making a Shape to Hold Quilled Pieces: Capital Letter</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Week 6: Basket of Flowers</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Week 7: Cherry Blossom Box</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Week 8: 2 x 5&rdquo; x 7&rdquo; Pictures: Duck and Boat</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Week 11: Pot of Lavender (1)&nbsp;</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Week 10: Pot of Lavender (2)</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">You will receive all the materials and items of equipment needed to complete the course. These are yours to keep:&nbsp;</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Materials and Equipment</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">&nbsp;</strong>Quilling Kit:&nbsp;</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Quilling Paper Strips: 39 mm: a variety of colours</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Quilling Paper Strips: 39 mm: white</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Quilling Board</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Needlemaker&#39;s Wheel of Pins</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Quilling Formers x 2&nbsp;</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Quilling Comb</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">1 Pair Tweezers</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Pokey Tool</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Quilling Tool: Short</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Quilling Tool: Long</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Scissors</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Glue Applicator</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Book Binders&rsquo; Glue 30 ml</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Black and white 300 gsm card for box and picture</p><p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(65, 65, 65); font-size: 14px; box-sizing: border-box;" fr-original-style="color: rgb(65, 65, 65); font-size: 14px;">Craft4Smiles C.I.C. is crafting community that&nbsp;</span><span style="color: rgb(0, 0, 0); font-size: 14px; box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0); font-size: 14px;">provides accessible high quality creative papercraft and mixed media online programmes for adults. Our courses are social and interactive whether delivered online or in-person. Our aim is to introduce and build crafting skills and the basic skills needed for success in the workplace and at home, including self-confidence, problem solving, communicating in a group, basic maths and English. We teach over 45 different paper craft and mixed media techniques. Each course is carefully constructed to help you develop your crafting skills and knowledge. &nbsp;</span></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(0, 0, 0); font-size: 14px; box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0); font-size: 14px;">Crafting and our courses are mindful, taking us away from the day-to-day. Participants have consistently reported improvements in their wellbeing. &nbsp;Anyone who wants to learn new skills can join our programmes. &nbsp;No previous experience of papercrafting or mixed media work is needed. We have delivered courses successfully in Cambridgeshire for 6 1/2 years and have worked with 280 Cambridges residents during this time. 86% of participants state that what we offer has helped to improve their wellbeing. 75% state that it has made a positive difference to their daily lives. &nbsp;</span></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(0, 0, 0); font-size: 14px; box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0); font-size: 14px;"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);">Please note that the Cademy calenda/description states that this course is over 13 weeks. This is because the 10 weeks of the course are delivered over 13 weeks, during 3 of which, Craft4Smiles is closed for holidays!&nbsp;</span><br fr-original-style="" style="box-sizing: border-box;"></span></p>

Craft4Smiles C.I.C. 

A standalone 10-week quilling course - 2 hours per week online with daytime and evening options - that will introduce you to the materials, tools, and techniques used in quilling and to Craft4Smiles C.I.C and our tutors.   At the end of each session you will have a lovely quilled item to show family and friends or to display on your shelf!  All materials and equipment needed will be supplied and are yours to keep. This course is helpful for those for whom English is not their native tongue as there is a lot of repetition of basic terms including numbers, colours and directions.  

Quilling

Craft4Smiles Cademy Launch

Testimonials
"An inspiring and engaging course."
"Refreshing to hear the family's perspective."
"Your enthusiasm for the topic along with the knowledge and awareness you have given me has given me my mojo back! "
Summary 
This extensive, 2-3 day, CPD certified, blended course comprises of an interactive learning platform which includes:
Pre-recorded training videos (6-8.5hrs depending on modules accessed)
Downloadable independent learning workbook
Interactive on-line question forum through Padlet
Optional live practical problem solving events
Bonus videos focused on using night time positioning equipment
Final live review event with trainers Rachel Wright and Sarah Clayton (via Zoom)
On completion, delegates get access to materials designed for practitioners to deliver 24-hour postural care training to unpaid individuals and families who use their service
Please note that the course will take a minimum of 14 hours of independent learning with the option of completing further hours by covering more than one age bracket - the live sessions will be in addition to these 14 hours. Please ensure you allocate enough learning time to complete this course. It is expected that all independent learning is finished before the review events to enable you to fully participate in the discussions.
 	Date	Time (GMT)
Introductory event & access to course content	 4 Nov 2024	1300-1400 
Practical application session 1	 18 Nov 2024	 1300-1400
Practical application session 2	 2 Dec 2024 	 1300-1400
Final live review events	16 Dec 2024	 1030-1600
Course content access expires	 7 Jan 2025	 
Details 
Using pre-recorded training, interactive on-line content (through Padlet), self-directed learning and live events, this substantial and comprehensive blended training course keeps delegates interested, engaged and learning new ways to bring excellence to their 24-hour postural care provision and focuses on the often neglected lying position and how unsupported lying drives changes to a person's body shape which impacts sitting, standing and functional movement. 
You will have access to the online learning from 4th November 2024 and be provided with all the information you will need to complete the course. At 1pm (GMT) on 4th November you will then join the trainers for an introductory event via Zoom to provide an outline of the training and to answer any questions you may have. Over the next few weeks you can access the pre-recorded training videos and interactive online content to enable you to complete the workbook. On 16th December there will be a series of live discussion events for the specific ages the course covers to assess your learning (you must attend at least one of these events - please see below for further information). 
Why? 
People with complex needs, deserve a thorough, co-ordinated 24-hour postural care service. We only get one body and yet people with complex disabilities don't always get the 'annual service' afforded the equipment they use.
Posture Positive report (2020) found training is a key aspect to developing resilient and robust 24-hour postural care for people with complex needs. Every person with complex needs or limited movement requires a comprehensive 24-hour postural care service delivered in a personalised way. 
Who? 
The course is suitable for specialist physiotherapists, specialist occupational therapists and other highly trained healthcare professionals working in health, SEN and social care. 
The course breaks down the life span of a person as follows:
0-3 years
Children and young people in education
Adults
Older people an palliative care
Each delegate selects the aspects of the course relevant to their particular area of practice whilst having access to all the course resources.
What? 
On completion of the course, it is hoped delegates will be equipped with the knowledge needed to deliver an outstanding, person-centred, 24-hour postural care service. 
This course covers: 
Why is postural care such a big deal?
What is 24-hour postural care?
Identification of need
Predictable changes to body shape
Preventing, protecting and reversing body shape distortion
Postural care in the real world with real people
Special considerations for all stages of life
Monitoring and evaluating outcomes
Co-production in developing personalised postural care
You can focus on one specific age group or take a general approach allowing you to adapt the course to meet your own learning objectives. 
On 16th December the final live review events with the trainers via Zoom are available for the specific ages that the course covers. You must attend at least one of these live discussion (the one most relevant to your practice) but you are welcome to join all four. Please note the timings are GMT.
10.30am - 11.30am 0-3 years
11.45am – 12.45pm Children in education
1.45pm - 2.45pm Adults
3.00pm - 4.00pm Older people and palliative care
Training for individuals and family carers
On successful completion of the course, all delegates will gain access to bespoke training materials designed by parents for parents of people with complex needs. This includes ongoing trainer support for local therapists hosting the workshops, pre-recorded training videos, workbook and designated webpage.
Group discounts
Contact us to book this training for your team, department or organisation with group discounts and bespoke training opportunities or if you would prefer to be invoiced directly for this training email admin@bornattherighttime.com 
Trainers 
Rachel Wright (BSc) Founder of Born at the Right Time Rachel is author of The Skies I'm Under, finalist 2020 RCN Nursing Awards, trainer, qualified nurse and unqualified mum of three sons; one of whom has severe disabilities and life-limiting epilepsy. Occasionally she ties on her trainers and runs in a vague attempt to counteract her love for Salt ‘n Vinegar crisps, hummus and all things carbohydrate. 
Sarah Clayton (BSc, PGCE) CEO Simple Stuff Works Sarah is passionate about all things postural care. Sounds dull but it turns out that her passion translates into highly contagious enthusiasm. She has developed a range of accredited training courses accessible to health, social care and education practitioners. Sarah has four children, works full-time and can regularly be found wearing her jumper inside out. 

Born at the Right Time

Physiotherapy

Occupational Therapy

Occupational Therapy Assistant

Palliative Care

Hospice & Palliative Medicine

Occupational Therapist

Health & Social Care

Physiotherapy Support Worker

End Of Life Care

Physiotherapist

CPD certified, digital study session, 24-hour postural care training, learning new ways to bring excellence to 24-postural care, focussing on supported lying. 

24-hour Postural Care from Cradle to Grave (Nov 24-Jan 25)

Quilling - Monday 19.00 - 21.00 or Tuesday 19.00 - 21.00


Broxburn

<p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">C10M09 - FD&amp;FA Gas Extinguishing - Detection &amp; Electrical Actuation BS 6266 &amp; BS 7273-1 (TWO DAY)</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Course Description</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Learners will develop knowledge of FD&amp;FA systems and apply this to the provision of detection and electrical actuation for gas extinguishing systems. This CPD course provides an enhanced understanding of the requirements of BS 7273-1, BS 6266, and BS 5839-1 in relation to the provision of appropriate detection and ancillary requirements for gas extinguishing systems.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">On completion, learners will have demonstrated an understanding of the detection &amp; electrical design of FD&amp;FA elements for gas extinguishing systems through practical design and knowledge assessments.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"> Who should attend?</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Anyone involved in the design, installation, commissioning, maintenance, or management of gas extinguishing systems e.g., FM providers, service managers, building/property managers, consultants, fire risk assessors, fire alarm contractors, fire alarm designers, gas extinguishing contractors. The course provides detailed knowledge of specific requirements of FD&amp;FA provision as part of a gas extinguishing system, as such knowledge and experience of BS 5839-1 would be of advantage.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Course Content</strong></p><ul fr-original-style="" style="box-sizing: border-box;"><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">BS 6266 &ndash; Fire protection for electronic equipment installations<ul style="font-size: initial; box-sizing: border-box;" fr-original-style="font-size: initial;"><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Risk assessment categories</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">FD&amp;FA protection strategy</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Premises construction</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">FD&amp;FA Design, installation</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Passive &amp; active fire protection measures</li></ul></li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">BS 7273-1 - Electrical actuation of gaseous total flooding extinguishing systems<ul style="font-size: initial; box-sizing: border-box;" fr-original-style="font-size: initial;"><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">System design</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Fire detection</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">CIE and ancillary control &amp; indication</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Power supplies and installation</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Commissioning and handover</li></ul></li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Relationship<ul style="font-size: initial; box-sizing: border-box;" fr-original-style="font-size: initial;"><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">BS 5839-1 / BS 6266 / BS 7273-1</li></ul></li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Practical Assessment</li></ul><p id="isPasted" style="color: rgb(63, 77, 90); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(63, 77, 90);"><img src="https://images.cademy.co.uk/88d338d8-7dc4-4054-bf9e-401495774eee/5293624b-3258-4be0-b61f-1d0469f76c49/original.png" style="width: 300px; display: block; vertical-align: top; margin: 5px auto; text-align: center; cursor: auto; padding: 0px 1px; user-select: none; max-width: 100%; position: relative; box-sizing: border-box;" fr-original-style="width: 300px; display: block; vertical-align: top; margin: 5px auto; text-align: center; cursor: auto;" fr-original-class="fr-draggable"></p>

C10M09 - FD&FA Gas Extinguishing - Detection & Electrical Actuation BS 6266 & BS 7273-1 (TWO DAY)
Course Description
Learners will develop knowledge of FD&FA systems and apply this to the provision of detection and electrical actuation for gas extinguishing systems. This CPD course provides an enhanced understanding of the requirements of BS 7273-1, BS 6266, and BS 5839-1 in relation to the provision of appropriate detection and ancillary requirements for gas extinguishing systems.
On completion, learners will have demonstrated an understanding of the detection & electrical design of FD&FA elements for gas extinguishing systems through practical design and knowledge assessments.

 Who should attend?
Anyone involved in the design, installation, commissioning, maintenance, or management of gas extinguishing systems e.g., FM providers, service managers, building/property managers, consultants, fire risk assessors, fire alarm contractors, fire alarm designers, gas extinguishing contractors. The course provides detailed knowledge of specific requirements of FD&FA provision as part of a gas extinguishing system, as such knowledge and experience of BS 5839-1 would be of advantage.

Course Content
BS 6266 – Fire protection for electronic equipment installationsRisk assessment categoriesFD&FA protection strategyPremises constructionFD&FA Design, installationPassive & active fire protection measures
BS 7273-1 - Electrical actuation of gaseous total flooding extinguishing systemsSystem designFire detectionCIE and ancillary control & indicationPower supplies and installationCommissioning and handover
RelationshipBS 5839-1 / BS 6266 / BS 7273-1
Practical Assessment


Ember Compliance

Fire Alarm

Gas Engineer

Professional Development

Engineer

Continuous Professional Development (CPD)

Learners will develop knowledge of FD&FA systems and apply this to the provision of detection and electrical actuation for gas extinguishing systems. 

C10M09 - Gas Extinguishing Detection & Electrical Actuation BS 6266 & BS 7273-1 (Online)

<div id="course-pills-1">Duration<p>3 Days</p><p>18 CPD hours</p>This course is intended for<p>The primary audience for this course is someone who works, or has ambition to work, in a leadership role in data center operations such as a data center facilities manager, data center operations manager, who has the responsibility to achieve and improve the high-availability and manageability of the data center operations.</p>Overview<p>After completion of the course the participant will be able to:<br />Perform the needs analysis translating business requirements to data center services<br />Set-up and manage the data center operations team<br />Implement and monitor safety- and security practices<br />Identify a suitable maintenance program for the data center facility and its equipment<br />Select the appropriate policies and procedures required for data center operations<br />Monitor the data center availability, capacity and capability<br />Manage and implement basic data center projects<br />Set-up and implement an environmental sustainability program<br />Select an appropriate back-up site to support organizational resilience<br />Identify and respond to risk in the data center<br />Manage and support the document life cycle<br />Create a basic budget proposal<br />Select and manage vendors and measure their performance<br />Manage data center assets</p><p>Managing the facilities of today?s high-end and high-availability data centers is an extremely demanding and complex task which is often underestimated. There is often very little appreciation and understanding of the complexities of managing today's mission-critical data centers where downtime is not an option, especially since many of the data centers are operating at, or near, their design limits. Operations management at the facilities layer makes all the difference. Even a data center designed to the highest redundancy level as per the ANSI/TIA-942 standard could still experience many unscheduled downtime events due to poor planning, operations, maintenance and management processes.</p></div><div id="course-pills-2"><h4>Service Level Management</h4><ul><li>Service Level Management</li><li>Needs analysis</li><li>Capability assessment</li><li>Service portfolio</li><li>Service catalogue</li><li>Service Level Agreements (SLAs)</li><li>Availability measurement</li><li>Data points in SLA</li><li>Service reporting</li><li>Complaint procedure</li><li>Customer satisfaction measurement</li><li>Service Improvement Process (SIP)</li><li>SLA content</li></ul><h4>The Data Center Organization</h4><ul><li>Operational issues</li><li>Organization chart</li><li>Roles and responsibilities</li><li>Skills matrix</li><li>Contingency / backup roles</li><li>Shift management</li><li>Performance management</li><li>Career development</li><li>Training and assessment</li><li>Job rotation</li><li>Succession planning</li><li>Disciplinary program</li></ul><h4>Managing Safety &amp; Statutory Requirements</h4><ul><li>Safety policies and regulations</li><li>Occupational Health and Safety (OH&amp;S)</li><li>Safety awareness training</li><li>Permit to Work (PTW)</li><li>Lock-out / Tag-out</li><li>Personal Protective Equipment (PPE)</li><li>Testing and tagging of equipment</li><li>Emergency preparedness and response</li><li>Reporting of safety issues</li><li>Reviews / internal audit / external audit</li></ul><h4>Managing Physical Security</h4><ul><li>Security policies and procedures</li><li>Security standards and guidelines</li><li>Security staff</li><li>Security awareness</li><li>Security incident management</li><li>Disciplinary program</li><li>Reviews, internal and external audits</li></ul><h4>Facilities Management</h4><ul><li>Maintenance policies and procedures</li><li>Various maintenance programs</li><li>Outsourcing of maintenance activities</li><li>Maintenance contract options</li><li>Warranty</li><li>Maintenance schedule</li><li>Service situations</li><li>Spart part management</li><li>Contamination control</li></ul><h4>Data Center Operations</h4><ul><li>Policies and procedures for data center operations</li><li>Service operations and the daily data center operations</li></ul><h4>Monitoring / Reporting / Control</h4><ul><li>Monitoring requirements</li><li>Escalation procedures</li><li>Reporting</li><li>Trend analysis</li><li>Reviews</li></ul><h4>Project Management</h4><ul><li>Project management</li><li>Project organization</li><li>Project manager</li><li>Project phases</li></ul><h4>Environment Sustainability</h4><ul><li>The importance of sustainability</li><li>Sustainability policies </li><li>Environmental management </li><li>Power efficiency indicators -</li><li>Waste management -</li><li>Water management</li><li>ICT utilisation management </li><li>Environmental performance measurements</li><li>Renewable energy factor (REF)</li></ul><h4>Organizational Resilience</h4><ul><li>Business continuity</li><li>Data center facility options</li><li>Business Impact Analysis</li><li>Type of facility</li><li>Human resources</li><li>Facility, equipment and consumables</li></ul><h4>Governance, Risk and Compliance</h4><ul><li>Management commitment</li><li>Coordination, collaboration and integration</li><li>Compliance</li><li>Risk management</li><li>Document management</li><li>Financial management</li><li>Vendor management</li><li>Asset management</li></ul></div><div id="course-pills-3"><h4>Additional course details:</h4><br /><p>Nexus Humans Certified Data Center Facilities Operations Manager (CDFOM) training program is a workshop that presents an invigorating mix of sessions, lessons, and masterclasses meticulously crafted to propel your learning expedition forward. </p><p></p> This immersive bootcamp-style experience boasts interactive lectures, hands-on labs, and collaborative hackathons, all strategically designed to fortify fundamental concepts. <p></p>Guided by seasoned coaches, each session offers priceless insights and practical skills crucial for honing your expertise. Whether you're stepping into the realm of professional skills or a seasoned professional, this comprehensive course ensures you're equipped with the knowledge and prowess necessary for success.  <p></p>While we feel this is the best course for the Certified Data Center Facilities Operations Manager (CDFOM) course and one of our Top 10 we encourage you to read the course outline to make sure it is the right content for you.  <p></p>Additionally, private sessions, closed classes or dedicated events are available both live online and at our training centres in Dublin and London, as well as at your offices anywhere in the UK, Ireland or across EMEA.<p></p></div>

Operations Management

Certified Facility Manager (CFM)

Commercial & Contract Management Certification Program (CCM)

Facility Management

Operations Manager

Certified Data Center Facilities Operations Manager (CDFOM)

Reading

Nottingham

Dickson Training Ltd

ILM Level 5 Qualifications in Business Coaching and Mentoring

Diploma (Zoom)

Certificate (Zoom)

Diploma

Certificate

<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Sixty minute webinar on Rally Regularity Timing covering equipment required, how to keep to time, working out penalties and speed changes, this webinar focuses on styles of regularity that require the use of standard average speed tables. The competitive component of on the public highway historic road rallying, focusing on regularity using average speed tables. Ideal for competitors on events such as HRCR Clubmans Championship or Rally of the Tests</p>

Sixty minute webinar on Rally Regularity Timing covering equipment required, how to keep to time, working out penalties and speed changes, this webinar focuses on styles of regularity that require the use of standard average speed tables. The competitive component of on the public highway historic road rallying, focusing on regularity using average speed tables. Ideal for competitors on events such as HRCR Clubmans Championship or Rally of the Tests

Rally Navigation Training Services

Sports & Fitness

Historic Road Rallying training webinar on Regularity focusing on Average Speed Table style regularities.

254 Courses in Leicester

Subsea Production Engineering - Incorporating Subsea Tie-backs - Virtual Instructor Led Training

By EnergyEdge - Training for a Sustainable Energy Future

Slinger Banksman (On-Site)

By You Can Do It .Training

Advanced Process Safety Engineering

By EnergyEdge - Training for a Sustainable Energy Future

Introduction to Power Systems

By EnergyEdge - Training for a Sustainable Energy Future

Transmission demystified

By Systems & Network Training

SDH foundation

By Systems & Network Training

People Handling Instructor and Assessor

By Guardian Angels Training

Total GSM

By Systems & Network Training

NOCN NVQ Level 3 Diploma in Supervising Hire and Rental Operations

By Learning for Hire Limited

Essential CPRI

By Systems & Network Training

Search By Location