Name: Maintenance, Inspection, Diagnostics, Testing, Troubleshooting, Refurbishment, & Protective Systems For All Key Electrical Equipment
Price: 3009 GBP
Availability: InStock

<div>
</div>
<section>
<div>
<h2><strong>About this Virtual Instructor Led Training (VILT)</strong></h2>
<p><span>The objective of this 4-half-day Virtual Instructor Led Training (VILT) course is to equip participants with the required knowledge so that they can define and implement an effective oil analysis programme, monitor the condition of transformers and understand oil analysis reports as part of their maintenance strategy.</span></p>
<p><span>This VILT course is delivered in partnership with ENGIE Laborelec.</span></p>
<p></p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p><span>Participants will be able to go through the following areas during the VILT course:</span></p>
<p><strong><span>Condition monitoring of power transformers through oil analyses:</span></strong></p>
<ul>
<li><span>Transformer Health Index, Transformer Fleet Condition Assessment, Risk Matrix</span></li>
<li><span>Best practices</span></li>
<li><span>Which oil analyses/how frequent</span></li>
<li><span>DGA: focus on partial discharges, sparking, stray gassing, catalytic effects / interpretation systems.</span></li>
<li><span>Interpretation of results</span></li>
<li><span>Why and when to perform electrical measurements?</span></li>
<li><span>International standards: IEEE, IEC, Duval, ASTM, etc</span></li>
<li><span>Maintenance guidelines</span></li>
<li><span>Trending and reporting</span></li>
<li><span>Sampling techniques</span></li>
</ul>
<p><strong><span>Use of online monitoring for DGA/water: implementation and real-case advantages etc:</span></strong></p>
<ul>
<li><span>New developments: importance of methanol as ageing marker, temperature correction of ageing markers, stray gassing of oils in service etc</span></li>
<li><span>REX, case studies and real-case exercises concerning power transformers within generation and high-voltage grids</span></li>
<li><span>Discussion of reports on power transformers</span></li>
<li><span>Use of unused insulating transformer oils</span></li>
<li><span>Market trends in the use of inhibited and uninhibited oils</span></li>
<li><span>Differences, advantages and drawbacks of uninhibited compared with inhibited oils</span></li>
<li><span>Importance of additives, oxidation stability tests, stray gassing, etc</span></li>
</ul>
<p>
</p></div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p><span>The VILT course is intended for a wide audience, including <strong>professionals who are maintenance staff, electrical engineers and asset managers responsible for transformers</strong>. Typical industries are powerplants, high voltage grids or large industrial sites.</span></p>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>The VILT course will be delivered online in 4 half-day sessions comprising 4 hours per day, with 2 x 10 minutes break per day, including time for lectures, discussion, quizzes and short classroom exercises.</span></p>
<p><span>Course Duration: 4 half-day sessions, 4 hours per session (16 hours in total).</span></p>
<p><span>This VILT course is delivered in partnership with ENGIE Laborelec.</span></p>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p><span>Your expert course leader is a senior expert in the field of insulating and lubricating oils and of condition monitoring of power transformers and turbines. He has 20 years of experience within power industry and since 2010 Key Expert within the ENGIE group. </span><span>He has worked on various international projects such as the Al Dur power plant in Bahrain, Shuweihat II power plant in UAE, PP11 and Jubail Marafiq power plants in Saudi Arabia and Sohar II and Barka III power plants in Oman. He has also been involved in consulting work in Malaysia for Hyrax Oil. Other assignments include Shell, Nynas, Total, ABB, Alstom, CG Pauwels in Europe.</span></p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information about post training coaching support and fees applicable for this.</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

EnergyEdge - Training for a Sustainable Energy Future

Renewable Energy

Oil & Gas

Advanced Level - Assessing and Monitoring the Condition of Power Transformers by Oil Analysis

Team of 10, pp

Normal Fee, pp

Nottinghamshire

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Who Should Attend</h2><p style="color: rgb(38, 49, 62); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">This course is aimed at candidates that require the knowledge and practical skills operate micro 360 excavator to excavate and load materials. This course can be completed by both novice and experienced candidates. We also offer refresher tests.</p><p style="color: rgb(38, 49, 62); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Novice course- 10 Days</p><p style="color: rgb(38, 49, 62); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Experienced worker tests- 1 day theory and practical assessment</p><h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Course information</h2><p style="color: rgb(38, 49, 62); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Category Excavator Micro (Up to 1 Tonne)</p><p style="color: rgb(38, 49, 62); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">It is envisaged that by the end of this course of training the trainee operator will be able to answer questions on and perform the following:<br fr-original-style="" style="box-sizing: border-box;">➢ Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as a plant operator<br fr-original-style="" style="box-sizing: border-box;">➢ Have a working knowledge of the manufacturer&rsquo;s handbook for the particular machine to be used<br fr-original-style="" style="box-sizing: border-box;">➢ Be able to locate and identify the major components of the machine and explain their functions<br fr-original-style="" style="box-sizing: border-box;">➢ Be able to locate and identify steering, driving and braking controls and explain their functions<br fr-original-style="" style="box-sizing: border-box;">➢ Identify and maintain PPE appropriate for micro excavator use<br fr-original-style="" style="box-sizing: border-box;">➢ Conduct all pre-operational checks in accordance with manufacturer&rsquo;s and legislative requirements<br fr-original-style="" style="box-sizing: border-box;">➢ Safely mount and dismount the machine<br fr-original-style="" style="box-sizing: border-box;">➢ Start and stop the engine and safely move the machine off and stop it safely<br fr-original-style="" style="box-sizing: border-box;">➢ Configure the machine for travel and manoeuvre it safely across varying terrain in open and confined areas<br fr-original-style="" style="box-sizing: border-box;">➢ Conduct all necessary safety checks at the work area<br fr-original-style="" style="box-sizing: border-box;">➢ Manoeuvre the machine to the work area and correctly configure in readiness to carry out<br fr-original-style="" style="box-sizing: border-box;">excavating tasks<br fr-original-style="" style="box-sizing: border-box;">➢ Carry out excavating tasks<br fr-original-style="" style="box-sizing: border-box;">➢ Load material onto transporting vehicles or into containers<br fr-original-style="" style="box-sizing: border-box;">➢ Reinstate excavation, grade and level ground<br fr-original-style="" style="box-sizing: border-box;">➢ Fit and remove attachments<br fr-original-style="" style="box-sizing: border-box;">➢ Carry out all end of shift and shut down procedures</p><h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Assessment</h2><p style="color: rgb(38, 49, 62); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Assessment will be to NPORS standards consisting of a theory test and practical test.</p><h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Certification</h2><p style="color: rgb(38, 49, 62); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">NPORS Traditional card &ndash; With the traditional card there is no requirements to complete an NVQ, a five year card is issued and after five years reassessment is required.</p><p style="color: rgb(38, 49, 62); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">NPORS CSCS &ndash; To ensure that the operator is able to receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant.</p>

Dynamic Training and Assessments Ltd

Construction

CSCS (Construction Skills Certification Scheme)

NPORS

NPORS Excavator Micro (up to 1 Tonne) (N016)

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Who Should Attend</h2><p style="color: rgb(38, 49, 62); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">This course is aimed at candidates who are already qualified to operate telescopic handlers and require knowledge and practical skills to transport suspended loads safely and correctly.</p><p style="color: rgb(38, 49, 62); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">&nbsp;This course can be completed by both novice and experienced candidates. We also offer refresher tests.</p><p style="color: rgb(38, 49, 62); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Novice course- 2 days</p><p style="color: rgb(38, 49, 62); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Experienced worker tests- 1 day theory and practical assessment</p><h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Course information</h2><p style="color: rgb(38, 49, 62); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Category N138 Telescopic Handler Suspended Loads</p><p style="color: rgb(38, 49, 62); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">It is envisaged that by the end of this course of training the learner will be able to answer questions on and perform the following:<br fr-original-style="" style="box-sizing: border-box;">➢ Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operator<br fr-original-style="" style="box-sizing: border-box;">➢ Be able to conform to manufacturers requirements as per technical data, conform to relevant regulations and legislation<br fr-original-style="" style="box-sizing: border-box;">➢ Be able to locate, identify and explain safe working loads, lifting capacity chart and explain how the manufacturer may reduce the lifting capacity when moving a suspended load, different lifting configurations and working ranges<br fr-original-style="" style="box-sizing: border-box;">➢ Identify and explain different lifting procedures, explain what task could fall into each category<br fr-original-style="" style="box-sizing: border-box;">➢ Identify and explain centres of gravity and calculate estimated weights of loads<br fr-original-style="" style="box-sizing: border-box;">➢ Identify any overhead / proximity hazards<br fr-original-style="" style="box-sizing: border-box;">➢ Be able to agree the signal codes / hand signals, direction of movement, safe working and safe landing placement zone with the slinger / signaller<br fr-original-style="" style="box-sizing: border-box;">➢ Ensure telescopic handler is in a safe condition and attachments fitted correctly<br fr-original-style="" style="box-sizing: border-box;">➢ Checked load integrity and security<br fr-original-style="" style="box-sizing: border-box;">➢ Be able to lift and move a load to a designated position in a safe and controlled manner, ensuring minimum uncontrolled movement<br fr-original-style="" style="box-sizing: border-box;">➢ Environmental considerations<br fr-original-style="" style="box-sizing: border-box;">➢ Carry out all out of service and securing procedures</p><h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Assessment</h2><p style="color: rgb(38, 49, 62); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Assessment will be to NPORS standards consisting of a theory test and practical test.</p><h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Certification</h2><p style="color: rgb(38, 49, 62); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">NPORS Traditional card &ndash; With the traditional card there is no requirements to complete an NVQ, a five year card is issued and after five years reassessment is required.</p><p style="color: rgb(38, 49, 62); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">NPORS CSCS &ndash; To ensure that the operator is able to receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant.</p>

NPORS Telescopic Handler Suspended Loads (N138)

<div>
</div>
<section>
<div>
<h2><strong>About this Virtual Instructor Led Training (VILT)</strong><em> </em></h2>
<p><span>This 2-half-day Virtual Instructor Led Training (VILT) course will discuss the chemical aspects of the water-steam cycle in a power plant. The VILT course will examine the different types of chemicals used in boilers, potential issues in a water-steam cycle as well as aspects of monitoring and specifications regarding target values and alarm levels. Participants will also be equipped on what to do or key action steps to take in the event of chemistry-related incidents.</span></p>
<p>This course is delivered in partnership with ENGIE Laborelec.</p>
<p></p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p><span>The VILT course will cover the following:</span></p>
<ul>
<li><span>Detailed aspects of chemistry in a water steam cycle, including types of chemicals used in boilers depending on the treatment and type of boiler</span></li>
<li><span>Potential issues in a water-steam cycle such as corrosion and deposition</span></li>
<li><span>Monitoring &amp; analytical programmes and knowledge of specifications for the water steam cycle (normal values targets - alarm levels)</span></li>
<li><span>Chemistry aspects during transition periods: start-up, shutdown and preservation</span></li>
<li><span>Actions to be taken in the event of an alarm</span></li>
<li><span>Examples of incidents or deviations compared to normal chemistry</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p><span>The VILT course is intended for:</span></p>
<ul>
<li><strong><span>Power plant chemists</span></strong></li>
<li><strong><span>Plant operation or maintenance engineers</span></strong></li>
<li><strong><span>Consultants and technical project managers</span></strong></li>
<li><strong><span>Boiler engineers</span></strong></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>The VILT course will be delivered online in 2 half-day sessions comprising 4 hours per day, with 2 x 10 minutes break per day, including time for lectures, discussion, quizzes and short classroom exercises.</span></p>
<p><span>Course Duration: 2 half-day sessions, 4 hours per session (8 hours in total).</span></p>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your expert course leader <span>is a chemistry consultant in the energy sector. He works with operators of power plants and industrial facilities. He is active in water-steam cycle chemistry, where he provides support to increase chemistry maturity through audits, trainings or development of key performance indicators.</span></p>
<p><span>His role also includes operational assistance in the field of chemical cleaning and troubleshooting. More recently, he expanded his field of competence towards electrical storage. In this regard, he specializes in electrochemistry and is in charge of different tests on batteries and their components within the ENGIE Batteries Lab.</span></p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information about post training coaching support and fees applicable for this.</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Assessing the Water-Steam Chemistry Cycle in Thermal Power Plants

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Who Should Attend</h2><p style="color: rgb(38, 49, 62); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">This course is aimed at candidates that require the knowledge and practical skills to use suction excavators to excavate ground where utilities services are located. This course can be completed by both novice and experienced candidates. We also offer refresher tests.</p><p style="color: rgb(38, 49, 62); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Novice course- 5 days</p><p style="color: rgb(38, 49, 62); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Experienced worker tests- 1 day theory and practical assessment</p><h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Course information</h2><p style="color: rgb(38, 49, 62); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Category N021 Suction Excavator</p><p style="color: rgb(38, 49, 62); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">It is envisaged that by the end of this course of training the trainee operator will be able to answer questions on and perform the following:<br fr-original-style="" style="box-sizing: border-box;">➢ Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as a suction excavator operator<br fr-original-style="" style="box-sizing: border-box;">➢ Have a working knowledge of the manufacturer&rsquo;s handbook for the particular suction excavator to be used<br fr-original-style="" style="box-sizing: border-box;">➢ Be able to locate and identify the major components of the machine and explain their functions<br fr-original-style="" style="box-sizing: border-box;">➢ Conduct all pre-operational checks in accordance with manufacturer&rsquo;s and legislative requirements<br fr-original-style="" style="box-sizing: border-box;">➢ Identify and maintain PPE appropriate for suction excavator use<br fr-original-style="" style="box-sizing: border-box;">➢ Explain the different types of suction excavators their advantages and disadvantages when excavating material<br fr-original-style="" style="box-sizing: border-box;">➢ Safely mount and dismount the machine<br fr-original-style="" style="box-sizing: border-box;">➢ Start and stop the engine, compressor and suction hoses safely and efficiently<br fr-original-style="" style="box-sizing: border-box;">➢ Be able to demonstrate how to safely and efficiently use the remote control<br fr-original-style="" style="box-sizing: border-box;">➢ Configure the machine for travel and manoeuvre it safely to the work position in open and confined areas<br fr-original-style="" style="box-sizing: border-box;">➢ Conduct all necessary safety checks at the work area<br fr-original-style="" style="box-sizing: border-box;">➢ Manoeuvre the machine to the work area and correctly configure in readiness to carry out<br fr-original-style="" style="box-sizing: border-box;">excavating tasks<br fr-original-style="" style="box-sizing: border-box;">➢ Demonstrate an emergency stop explaining all relevant safety precautions<br fr-original-style="" style="box-sizing: border-box;">➢ Carry out excavating tasks<br fr-original-style="" style="box-sizing: border-box;">➢ Fit and remove different attachments<br fr-original-style="" style="box-sizing: border-box;">➢ Explain and demonstrate how to deposit material from the suction excavator safely and efficiently<br fr-original-style="" style="box-sizing: border-box;">➢ Environmental considerations<br fr-original-style="" style="box-sizing: border-box;">➢ Carry out all end of shift and shut down procedures</p><h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Assessment</h2><p style="color: rgb(38, 49, 62); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Assessment will be to NPORS standards consisting of a theory test and practical test.</p><h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Certification</h2><p style="color: rgb(38, 49, 62); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">NPORS Traditional card &ndash; With the traditional card there is no requirements to complete an NVQ, a five year card is issued and after five years reassessment is required.</p><p style="color: rgb(38, 49, 62); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">NPORS CSCS &ndash; To ensure that the operator is able to receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant.</p>

NPORS Suction Excavator (N021)

<div>
</div>
<section>
<div>
<h2><strong>About this Virtual Instructor Led Training (VILT)</strong><em> </em></h2>
<p>Electrical machines, mainly power transformers and electric motors are critical equipment that run production, and it must operate without any abnormalities. A wide variety of tests and standards have been developed to assist manufacturers and users of motors and transformer winding, assess the condition of the electrical insulation.</p>
<p>The objective of this training course is to provide an understanding of power transformers and electric motors, their materials, components, and how they operate. It will also emphasize the importance of transformer life management, especially for those transformers and electric motors which have been in operation for than 10 years. The course will address in detail all aspects related to transformer principles, calculations, operation, testing and maintenance.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>This course aims to provide participants with the understanding of the fundamentals and constructional features of power transformers and electric motors, with particular reference to the design, testing, operation and maintenance of transformers in power systems.</p>
<p>Delegates will gain a detailed appreciation of the following:</p>
<ul>
<li>Practical solutions for specifying, operating and maintaining power transformers and electric motors in a utility or plant environment</li>
<li>Comprehensive understanding of principles, protection, maintenance and troubleshooting of power transformers and electric motors</li>
<li>The necessary safe procedures relating to transformer operation and related circuitry</li>
<li>Understand the principles of operation of the transformer and electric motors</li>
<li>Identify the different features of power transformers and electric motors</li>
<li>Appreciate the principles of transformer design, ratings, winding, core structure and materials, insulation and cooling methods, insulation and lifetime</li>
<li>Utilize thermal limits and loading guides of transformers</li>
<li>Analyze transformer and electric motors failure modes</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li>Engineers of all disciplines</li>
<li>Managers</li>
<li>Technicians</li>
<li>Maintenance personnel</li>
<li>Other technical individuals</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p>The VILT will be delivered online in 4 half-day sessions comprising 4 hours per day, with 1 x 10 minutes break per day, including time for lectures, discussion, quizzes and short classroom exercises.</p>
<p>Additionally, some self-study will be requested. Participants are invited but not obliged to bring a short presentation (10 mins max) on a practical problem they encountered in their work. This will then be explained and discussed during the VILT. A short test or quiz will be held at the end the course.</p>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Our key expert is actively involved in electrical inspections, energy audits, energy efficiency and technical consultation for M&amp;E activities for industrial and commercial sectors.</p>
<p>He is involved in testing and commissioning works of factory substations of up to 132kV system. He previously worked for Jimah coal-fired power plant in Port Dickson for 9 years with his last position being Electrical Maintenance Section Head. He was involved in the commissioning of coal-fired power plant mainly with 500kV generator transformer, 934 MVA generator, and up to 33kV MV motors and switchgear panels.</p>
<p>Our key expert has managed the maintenance team to perform routine maintenance activities (together with supporting tools such as motor lube oil analysis, infrared thermography analysis, transformer oil analysis) &amp; electrical troubleshooting and plant outages for critical and non-critical equipment.</p>
<p>Besides that, our key expert has published several IEEE conference papers and journals such as:</p>
<ul>
<li>(2009). Effectiveness of auxiliary system monitoring &amp; continuous hydrogen scavenging operation on hydrogen-cooled generator at power plant. In Energy and Environment, 2009. ICEE 2009. 3rd International Conference on (pp. 151-160). IEEE.</li>
<li>(2010). Study on electric motor mass unbalance based on vibration monitoring analysis technique. In Mechanical and Electrical Technology (ICMET), 2010 2nd International Conference on (pp. 539-542). IEEE.</li>
<li>(2012). Re-Design of AC Excitation Busduct based on Infrared (IR) Thermography: Condition-Based Monitoring (CBM) data analysis. eMaintenance, 101.</li>
<li>(2016). Energy Saving Studies for a University Campus: An Educational-Based Approach, 3rd International Conference on Language, Education, Humanities and Innovation 2016.</li>
<li>'Grid-tied photovoltaic and battery storage systems with Malaysian electrcity tariff - A review on maximum demand shaving.' Energies 10.11 (2017): 1884</li>
<li>'Techno-Economic Optimization of Grid-Connected Photovoltaic (PV) and Battery Systems Based on Maximum Demand Reduction (MDRed) Modelling in Malaysia.' Energies 12.18 (2019): 3531</li>
</ul>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information about post training coaching support and fees applicable for this.</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Operations, Maintenance and Testing of Power Transformer & Electric Motors

<div>
</div>
<section>
<div>
<h2><strong>About this Virtual Instructor Led Training (VILT)</strong><em> </em></h2>
<p>The Advanced Reservoir Engineering VILT course will address modern practical aspects of reservoir engineering during 5 half-days packed with lectures, virtual exercises, discussions and literature reviews. The participants' understanding of fundamental concepts and modern practical reservoir engineering methods will be deepened and a wide range of topics will be addressed.</p>
<p><strong>Topics covered</strong></p>
<p>The VILT course will emphasise reservoir engineering applications and include topics such as:</p>
<ol>
<li>Rock properties of clastic and carbonate reservoirs</li>
<li>Reservoir characterisation</li>
<li>Reservoir fluid behaviour</li>
<li>Identification of main production mechanisms</li>
<li>Design and analysis of well tests</li>
<li>Production forecasting</li>
<li>Application of Decline Curve Analysis in mature fields</li>
<li>Detailed modeling of wells and reservoirs</li>
<li>Water flooding</li>
<li>Application of EOR methods</li>
<li>Reserves and resource estimation</li>
<li>Reservoir simulation approaches, model construction and well, aquifer and fluid modelling</li>
<li>Development planning</li>
<li>Uncertainty handling and scenario methods</li>
</ol>
<p>Depending on the background and requirements of the participants, some topics may be given more emphasis.</p>
<p> </p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>In this VILT course, reservoir engineering methods will be addressed which are of use in the daily reservoir engineering practice. The focus will be on practical applicability. Use is made of practical and actual reservoir engineering problems and examples to illustrate relevant subjects.</p>
<p>By attending this VILT course, participants will have a deeper knowledge of modern reservoir engineering practices for reservoir development and production, including the construction and use of reservoir models.</p>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>The VILT course is intended for <strong>experienced reservoir engineers with prior technical or engineering exposure to production activities. </strong>Petroleum engineers and geoscientists who require more than general knowledge of reservoir engineering will also find this course useful.</p>
<p><strong>Participants are invited but not obliged to bring a short presentation (max of 15 minutes) on a practical problem they encountered in their work. This will then be explained and discussed in the VILT class. A short test or quiz will be held at the end the VILT course.</strong></p>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><strong>This VILT course will be delivered online over 5 half-days.</strong> There will be 2 blocks of two hours per day, including lectures, discussion, quizzes and short classroom exercises. Additionally, some self-study will be required. Two breaks of 10 minutes will be provided each day.</p>
<p>Course Duration: 5 half-day sessions, 4 hours per session (20 hours in total).</p>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your course leader is an independent Reservoir Engineering Consultant. He provides project consultancy, quality assurance and reservoir engineering training for major oil companies, governments, engineering firms and other global customers. Before he retired from Shell in 2012, he held positions as Senior Reserves Consultant for the Middle East and Reservoir Engineering Discipline Lead. He is a petroleum engineering professional, with global experience, mostly in Shell companies and joint ventures (NAM, SSB, SCL, PDO, SKDBV). He has been involved in reserves and resource management, has extensive reservoir modelling and reservoir simulation expertise, and wide experience in the design and delivery of training programmes for employee development.</p>
<p><strong>PROFESSIONAL EXPERIENCE</strong><br />
<strong>2012 - 2016 Independent Reservoir Engineering Consultant</strong><br />
Project consultancy, quality assurance and reservoir engineering training for major oil companies, governments, engineering firms and other global customers. Delivering specialised and general Reservoir Engineering courses to a multitude of international companies.</p>
<p><strong>2008 - 2012 Shell International E&amp;P, the Hague, the Netherlands</strong><br />
Senior Reserves Consultant for the Middle East Region<br />
Assurance of SEC and SPE compliance of reserves and resources in Shell Middle East region. Contributor to the 2012 SPE guidelines on reserves and resources assessment.</p>
<p><strong>2006 - 2008 Shell E&amp;P Technology Solutions, Rijswijk, the Netherlands</strong><br />
Reservoir Engineering Discipline Lead<br />
Responsible for QA/QC of Reservoir Engineering in global E&amp;P projects as well as for staff development. (over 60 international Reservoir Engineers)</p>
<p><strong>2001 - 2005 Centre for Carbonate Studies, SQU, Oman / Shell International E&amp;P</strong><br />
Technology Applications and Research /Shell Representative Office Oman</p>
<p><strong>Petroleum Engineering Manager</strong><br />
PE manager in the Carbonate Research centre, at Sultan Qaboos University in Oman. Industrial research projects and support to teaching on recovery aspects of carbonate reservoir development. Design and delivery of industrial courses on carbonate reservoirs</p>
<p><strong>1997- 2000 Shell International E&amp;P, Rijswijk, the Netherlands</strong><br />
Principal Reservoir engineer. Acting Shell Group Reserves Co-ordinator in 1997-1998. Facilitation of workshops with government shareholders, including discussions on sensitive reserves issues (BSP Petroleum Unit Brunei, PDO Oman, SPDC government Nigeria).<br />
Co-ordination of the NOV subsurface team in Shell Kazakhstan Development BV in 2000. Leading role in Shell Gamechanger project on natural gas hydrates.</p>
<p><strong>1992- 1996 Shell Training Centre, Noordwijkerhout, the Netherlands</strong><br />
Reservoir Engineering Programme Training Director<br />
Directed Shell Group Reservoir Engineering Training. Introduced advanced PE training events, QA/QC and learning transfer measures, Design and delivery of reservoir engineering and multidiscipline courses to Shell staff from a wide range of nationalities.</p>
<p><strong>1985- 1992 Shell International, SIPM, the Hague, The Netherlands</strong><br />
Senior Reservoir Engineer<br />
Full field reservoir simulation projects supporting Field Development Plans, operational strategies and unitisation negotiations for Shell Group Operating Companies in the United Kingdom, New Zealand and Egypt. Major contributor to the Shell internal Gas Field Planning Tool development.</p>
<p><strong>1984- 1985 Geological Survey of the Netherlands (RGD), Ministry of Economic Affairs</strong><br />
Reservoir Engineering Section Head Responsible for Petroleum Engineering advice on oil and gas licences to the Ministry of Economic Affairs. First-hand experience with a government view on resource management.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information about post training coaching support and fees applicable for this.</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Advanced Reservoir Engineering

London

<div style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);"><ul fr-original-style="" style="box-sizing: border-box;"><li style="font-weight: bold; box-sizing: border-box;" fr-original-style="font-weight: bold;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Improve social anxiety</strong></li><li style="font-weight: bold; box-sizing: border-box;" fr-original-style="font-weight: bold;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Learning how to improve emotional intelligence</strong></li><li style="font-weight: bold; box-sizing: border-box;" fr-original-style="font-weight: bold;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Coping mechanisms for anxiety inducing situations</strong></li><li style="font-weight: bold; box-sizing: border-box;" fr-original-style="font-weight: bold;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Confidence building</strong></li><li style="font-weight: bold; box-sizing: border-box;" fr-original-style="font-weight: bold;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Triggers Diagnosis</strong></li><li style="font-weight: bold; box-sizing: border-box;" fr-original-style="font-weight: bold;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Introspection tests</strong></li><li style="font-weight: bold; box-sizing: border-box;" fr-original-style="font-weight: bold;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Characteristics Analysis</strong></li><li style="font-weight: bold; box-sizing: border-box;" fr-original-style="font-weight: bold;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Behavioural pattern management</strong></li><li style="font-weight: bold; box-sizing: border-box;" fr-original-style="font-weight: bold;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Cognitive distortions training</strong></li><li style="font-weight: bold; box-sizing: border-box;" fr-original-style="font-weight: bold;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Graduated exposure techniques</strong></li><li style="font-weight: bold; box-sizing: border-box;" fr-original-style="font-weight: bold;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Reframing thoughts</strong></li><li style="font-weight: bold; box-sizing: border-box;" fr-original-style="font-weight: bold;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Learning self acceptance</strong></li><li style="font-weight: bold; box-sizing: border-box;" fr-original-style="font-weight: bold;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Overcoming confidence issues from past rejections</strong></li><li style="font-weight: bold; box-sizing: border-box;" fr-original-style="font-weight: bold;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Teaching texting techniques</strong></li><li style="font-weight: bold; box-sizing: border-box;" fr-original-style="font-weight: bold;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Teaching Social gathering techniques</strong></li></ul></div><div style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);"><br fr-original-style="" style="box-sizing: border-box;"></div><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><a href="https://relationshipsmdd.com/product/social-confidence-coaching-package/" id="isPasted" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">https://relationshipsmdd.com/product/social-confidence-coaching-package/</a></p>

Miss Date Doctor Dating Coach London, Couples Therapy

M.D.D SOCIAL CONFIDENCE COACHING PACKAGE (SOCIAL CONFIDENCE)

General admission

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>This 5 full-day course provides a comprehensive understanding of the various types of generators, exciters, automatic voltage regulators (AVRs), governing systems, and protective systems.</p>
<p>The focus will be on maximizing the efficiency, reliability and longevity of these equipment by providing an understanding of the characteristics, selection criteria, common problems and repair techniques, preventive and predictive maintenance.</p>
<p>The emphasis of this course is on protective systems, inspection methods, diagnostic testing, troubleshooting, modern maintenance techniques, refurbishment, rewind and upgrade options, as well as advanced methods for preventing partial discharge and other failures.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong>Equipment Operation:</strong> Gain a thorough understanding of the operating characteristics of generators, exciters, AVR's and protective systems</li>
<li><strong>Equipment Diagnostics and Inspection:</strong> Learn in detail all the diagnostic techniques and inspections required of critical components of generators, exciters, AVR's and protective systems</li>
<li><strong>Equipment Testing:</strong> Understand thoroughly all the tests required for the various types of generators, exciters, AVR's and protective systems</li>
<li><strong>Electrical Generator Protective Systems:</strong> Gain a thorough understanding of all Electrical generator protective systems including: all electrical relays, tripping mechanisms, protective systems for negative phase sequence (unbalance loading), loss of excitation, over fluxing protection (over-voltage and underfrequency), reverse power (generator monitoring), over-speeding, pole slipping / out of step (sudden increase in torque or weakness in excitation), Class A protection, Class B protection</li>
<li><strong>Equipment Maintenance and Troubleshooting:</strong> Determine all the maintenance and troubleshooting activities required to minimize the downtime and operating cost of generators, exciters, AVR's and protective systems</li>
<li><strong>Equipment Repair and Refurbishment:</strong> Gain a detailed understanding of the various methods used to repair and refurbish generators, exciters, AVR's and protective systems</li>
<li><strong>Equipment Rewind and Upgrade Options:</strong> Discover all options available to rewind and upgrade the generator rotor and stator to enhance the output and reduce downtime</li>
<li><strong>Efficiency, Reliability, and Longevity:</strong> Learn the various methods used to maximize the efficiency, reliability, and longevity of generators, exciters, AVR's and protective systems</li>
<li><strong>Advanced Methods to Prevent Failure:</strong> Gain a thorough understanding of all the methods used to prevent partial discharge, and other failures in generators, exciters, AVR's and protective systems</li>
<li><strong>Equipment Sizing:</strong> Gain a detailed understanding of all the calculations and sizing techniques used for generators, exciters, AVR's and protective systems</li>
<li><strong>Design Features:</strong> Understand all the design features that improve the efficiency, reliability of generators, exciters, AVR's and protective systems</li>
<li><strong>Equipment Selection:</strong> Learn how to select generators, exciters, AVR's and protective systems by using the performance characteristics and selection criteria that you will learn in this course</li>
<li><strong>Equipment Enclosures and Sealing Methods:</strong> Learn about the various types of enclosures and sealing arrangements used for generators, exciters, AVR's and protective systems</li>
<li><strong>Equipment Commissioning:</strong> Understand all the commissioning requirements for generators, exciters, AVR's and protective systems</li>
<li><strong>Equipment Codes and Standards:</strong> Learn all the codes and standards applicable for generators, exciters, AVR's and protective systems</li>
<li><strong>Equipment Causes and Modes of Failures:</strong> Understand causes and modes of failures of generators, exciters, AVR's and protective systems</li>
<li><strong>System Design:</strong> Learn all the requirements for designing different types of generators, exciters, AVR's and protective systems</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li>Engineers of all disciplines</li>
<li>Managers</li>
<li>Technicians</li>
<li>Maintenance personnel</li>
<li>Other technical individuals</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>ELECTRICAL EQUIPMENT HANDBOOK' published by McGraw-Hill in 2003 (600 pages)</span></li>
<li><span>Generator Inspection, Testing, Maintenance, Protective Systems and Refurbishment Manual (this manual covers all the inspection and maintenance activities as well as all protective systems required for generators - 400 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories.</p>
<p>While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment.</p>
<p>Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations.</p>
<p>In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures.</p>
<p>He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Electrical Generators, Excitation Systems and Governing Systems

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>This 5 full-day course provides a comprehensive understanding of all the maintenance, inspection, diagnostics, testing, troubleshooting, refurbishment, and protective systems of all key electrical equipment including: transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries. It will cover in detail all the inspection methods and tests required to identify faults and deficiencies in electrical equipment, as well as, the repair techniques and available refurbishment methods.</p>
<p>The course will also cover the activities required to commission this equipment and it will also cover all protective systems associated with this equipment.  The objective of the seminar is to maximize the efficiency, reliability, and longevity of this type of equipment by providing an understanding of the common problems and repair techniques, preventive and predictive maintenance.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong>Electrical Equipment Testing and Maintenance: </strong>Gain a thorough understanding of all the testing and maintenance required for all key electrical equipment including transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries</li>
<li><strong>Electrical Equipment Inspection and Diagnostics: </strong>Learn about the inspection and diagnostics required for all the components of transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries</li>
<li><strong>Electrical Equipment Troubleshooting:</strong> Determine all the troubleshooting activities required to minimize the downtime and operating cost of transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries</li>
<li><strong>Electrical Equipment Online Condition Monitoring:</strong> Learn about online condition monitoring of transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries</li>
<li><strong>Electrical Equipment Repair and Refurbishment: </strong>Obtain a detailed understanding of the various methods used to repair and refurbish transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries</li>
<li><strong>Efficiency, Reliability, and Longevity: </strong>Learn the various methods used to maximize the efficiency, reliability, and longevity of transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries</li>
<li><strong>Rotating </strong><strong>Equipment Vibration Analysis and Balancing Methods:</strong> Learn about vibration analysis and balancing methods of motors and generators.</li>
<li><strong>Electrical Equipment Codes and Standards: </strong>Learn all the codes and standards applicable for transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries</li>
<li><strong>Equipment Causes and Modes of Failure: </strong>Understand the causes and modes of failure of transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries</li>
<li><strong>Generator Upgrades and Rewinds:</strong> Learn the various methods used to upgrade and rewind a generator</li>
<li><strong>Protective Systems: </strong>Obtain a detailed understanding of all protective systems required for transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li>Engineers of all disciplines</li>
<li>Managers</li>
<li>Technicians</li>
<li>Maintenance personnel</li>
<li>Other technical individuals (this course is suitable for individuals who do not have an electrical background)</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>The relevant material of the 'ELECTRICAL EQUIPMENT HANDBOOK' published by McGraw-Hill in 2003 (600 pages)</span></li>
<li><span>Electrical Equipment Maintenance, inspection, diagnostics, testing, troubleshooting, refurbishment, and protective systems Manual (500 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories.</p>
<p>While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment.</p>
<p>Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations.</p>
<p>In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures.</p>
<p>He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Maintenance, Inspection, Diagnostics, Testing, Troubleshooting, Refurbishment, & Protective Systems For All Key Electrical Equipment

Bournemouth

London Waterloo Academy

Dental Nurse

Dental Assistant

VIRTUAL DENTAL NURSING DIPLOMA

Registration Fee

Tuition Fee

Exam Fee

One Day Introduction Course

Swansea

ONLINE STUDY + ONE DAY ZOOM SESSION
NO CLASSROOM ATTENDANCE REQUIRED


Awarding Body: Dual Accreditation - Open College Network (OCN Credit4Learning) & The CPD Certification Service (21 CPD Points)
 
Award Level: UK - Level Three (Advanced) + 21 CPD Points
Ireland Level Five (Advanced) + 21 CPD Points
 
Minimum Age: 18 (16 with parental consent)
 
Entry requirements: None. English Level 2 desirable
 
Training Locations: Study online + virtual classroom.
 
Practical Training: Includes FREE Practise@Home Phlebotomy Training Kit worth £79.99
This comprehensive 76 piece practical training kit includes mini-arm trainer, sharps container and all medical grade supplies needed as well as a step-by-step 30 minute training video.



PART 1 (THEORY) - STUDY AT HOME ONLINE :
Complete your theory training online in the comfort of your own home or at work. Stop/start when it suits you and complete the online modules at your own pace. Can be completed on multiple devices such as laptop, smart-phone, desktop computer, kindle, tablet etc.
 
PART 2 (PRACTICAL SESSIONS) - JOIN US FOR A COMPREHENSIVE ONE DAY ZOOM SESSION:
Full instructions will be provided. We will send you a completely free Practise@Home Phlebotomy Training Kit, including a mini-arm trainer, for you to keep. You will follow your tutor's on-screen instructions during your Zoom virtual classroom sessions as you learn and develop your phlebotomy skills. The procedures and practices taught online are exactly the same as you would learn in the classroom. At any time before or after your course you can watch our 30 minute step-by-step video to refresh your knowledge and continue to use your training kit to practice your skills.
 
(THIS COURSE AWARDS THE SAME NATIONALLY RECOGNISED AND DUALLY ACCREDITED QUALIFICATION AS OUR CLASSROOM AND HYBRID COURSE VERSIONS)


Please make sure you verify the precise dates and timings of your course when you receive your booking confirmation, as it may vary from the information provided above.


COURSE ITINERARY

 
A dually-accredited hybrid modular venepuncture course awarding an
OCN Accredited Level Three Certificate (3 credits) & 21 CPD Points


Nationally Recognised Qualification


Part 1 - online (eLearning) Part 2 - Virtual Classroom (1 Day Zoom)


PRE-COURSE
Home study pack - download and complete before the virtual classroom sessions

PART 1 - ONLINE
M01: Course Overview
M02: History, Definitions and Roles
M03: Work-flow cycles
M04: Professionalism
M05: Health & Safety
M06: Blood Collection Systems
M07: Anatomy & Physiology
M08: Blood Composition
M09: Using the equipment
M10: Performing the venepuncture - see Classroom Part 2
M11: Lab Tests and Bottle Types
M12: Analytical Errors
M13: Informal Quiz – answers
M14: Award – accredited certificates, value, application and overview. Job Opportunities.


PART 2 - VIRTUAL CLASSROOM (ONE DAY ZOOM SESSION)
M01: Introduction: Welcome, Introductions and Overview.
M10: Performing the venepuncture (theory overview)
P01: Practical Session 1 – Equipment familiarisation - "Tools of the Trade"
P02A: Practical Session 2A – Unpacking your training kit
P02B: Practical Session 2B - A look at the mini-arm trainer and associated equipment
P03: Practical Session 3 – Using the tourniquet and identifying a vein
P04: Practical Session 4 – Handling and assembling the equipment. Familiarisation and procedures including initial skill-set development
P05: Practical Session 5 - Further skill-set development and consolidation. Discussing needle types including winged infusion sets (butterfly needles)
P06A: Practical Session 6A – Performing the venepuncture on the mini-arm trainer. Palpating the vein, performing the venepuncture. Sample handling and labelling.
P06B: Practical Session 6B – Consolidating pre- and post-venepuncture procedures.
 
Additional support material can be downloaded as you progress through the course online.





ZOOM SESSION

VIRTUAL CLASSROOM (ZOOM) SESSIONS 
Our Virtual Classroom training course consists of online study (Part 1 - theory) and Virtual Classroom Zoom sessions (Part 2 - practical skill-set development)
You must complete your Part 1 online study before joining us for your Zoom session(s).
Once you have enrolled on this course you will be sent a free Practise@Home Training Kit, This is yours to keep and can be reused any many time as you wish after you have completed the course.
Your Booking Confirmation will include your Zoom log-in details.



Geopace Training

Allied Health

Allied Health Professions (AHP)

Blood Taking

Healthcare Workers

Venepuncture

Phlebotomist

Phlebotomy

Accredited Phlebotomy

Healthcare

Learn how to take blood ... train as a Phlebotomist

    Nationally Recognised Qualification

    No previous experience or qualifications needed

    OCN Accredited - Level 3 (advanced)

    CPD Accredited (The CPD Certification Service)

    Covers all steps up to live blood draw

    Practise on artificial arm and fake blood!

    Basic understanding of English language required

    OPEN TO ALL APPLICANTS


Introduction to Phlebotomy Course (GPT003VC) - 1 DAY Virtual Classroom

General Admission

<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Ninety minute webinar on Rally Navigation covering maps and plotting route instructions on to the map. Ideal for competitors on events such as HRCR Clubmans Championship, 12 Cars or Rally of the Tests</p>

Ninety minute webinar on Rally Navigation covering maps and plotting route instructions on to the map. Ideal for competitors on events such as HRCR Clubmans Championship, 12 Cars or Rally of the Tests

Rally Navigation Training Services

Sports & Fitness

Rally Navigation Training Webinar on Maps and Route Plotting, cover common techniques and lots of hints and tips.

Rally Navigation - Maps and Route Plotting

<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Sixty minute webinar on Rally Regularity Timing covering equipment required, how to keep to time, working out penalties and speed changes, this webinar focuses on styles of regularity that require the use of standard average speed tables. The competitive component of on the public highway historic road rallying, focusing on regularity using average speed tables. Ideal for competitors on events such as HRCR Clubmans Championship or Rally of the Tests</p>

Sixty minute webinar on Rally Regularity Timing covering equipment required, how to keep to time, working out penalties and speed changes, this webinar focuses on styles of regularity that require the use of standard average speed tables. The competitive component of on the public highway historic road rallying, focusing on regularity using average speed tables. Ideal for competitors on events such as HRCR Clubmans Championship or Rally of the Tests

Historic Road Rallying training webinar on Regularity focusing on Average Speed Table style regularities.

Rally Navigation - Regularity for Improvers

Flight Attendant

Stewardess

FLIGHT ATTENDANT VIRTUAL VIA ZOOM COURSE, EVENINGS

Course Fee

Southend on Sea

Droitwich Spa

Portsmouth

Rotherham

Manchester

Leeds

Slough

Bingley

Newport

Peterborough

Milton Keynes 

Nottingham

Paisley

Derby

Birmingham

Luton

Hull

Northampton

Bedford

Liverpool 

ONLINE STUDY - In your own time (approx. 6 hours study time) +
CLASSROOM SESSION - Morning, Afternoon or Evening session (approx. 3 hours)



Awarding Body: Open College Network (OCN) Credit for Learning
Award Level: Level 4 (Foundation Degree Level) - Ireland Level 6
CPD Certified: Yes (CPD Accreditation)
Minimum Age: 18 (16 with parental consent)
Entry requirements: None. (English Level 2 desirable)
Training Locations: Study online + Classroom
 
OCN Accredited at UK Level 4 (Ireland Level 6)

 
PART 1 - Theory: Complete this part of your course online at home or work in your own time (stop and start learning when it suits you). Can be completed on multiple devices - smart phones, kindle, laptop, tablet etc.

PART 2 - Skills and Practical Development:
Covers advanced specialised phlebotomy techniques to give you the leading edge as a phlebotomist. Learn to use a wide range of non-routine equipment.


Attend a classroom location to complete your practical training.


Please make sure you verify the precise dates and timings of your course when you receive your booking confirmation, as it may vary from the information provided above.


Course Itinerary:
PART 1 - THEORY (ONLINE)
M00 - Introduction:
Learning outcomes, Assumptions and Overview.
M01 - Basic Phlebotomy - revision:
Recap of basic phlebotomy theory and practice - precursor to
the advanced course.
M02 - Aspirated and Vacuated Systems:
Open systems (Syringe & Needle), closed systems (Vacutainer & Monovette), Alternative closed systems, Using Monovette - aspiration and evacuated techniques, monovette adapter systems.
M03 - Specialised and Advanced Phlebotomy Equipment:
The centrifuge - overview. Safe operation and use. Managing a centrifuge breakage or spillage.
Equipment and practices in unusual situations.
Patients with special needs and requiring specific attention.
Equipment preparation for blood samples that are collected at
0 degrees, 37 degrees C and other non-standard conditions.
A look at advances in technology and how to use the latest devices.
M04 - Point of Care Testing:
What is POC Testing? Advantages, Disadvantages and Clinical
Outcomes. Comparison of POC with lab testing. 10 common POC tests. Roles for phlebotomists performing POC Tests.
M05 - Neonates and Children:
Sample collection from new-born to pre-adult. A detailed overview of legal principles of law including child consent and child protection for phlebotomists. Neonatal and child blood collection equipment.
A comprehensive look at heel and finger-prick procedures including
microtainers, lancets and capillary tube collection. Detailed heel prick procedure. Paediatric finger prick collection. The life-threatening hazard of over-collecting. Communication techniques in differing age bands.
Consent and the law. Basic principles of lawful consent for neonates and paediatric patients. Child protection.
Detailed analysis of neonatal and paediatric blood collection including Guthrie card collection. Neonatal bottles - colours and tests. Paediatric blood gases collection.
Butterfly needles - when to use. Blood tests during pregnancy. Neonatal blood screening - nine conditions covered. Bilirubin in neonates.
M06 - Geriatric Patients:
The challenges of phlebotomy in older people. Understanding skin changes and venepuncture implications. A profile of common
geriatric blood tests. Age related problems. Procedural precautions.
M07 - Special Procedures:
Drawing blood from back of hand. Drawing blood from lower limb veins. Managing the unwilling or difficult patient. Managing the psychiatric patient. Managing the isolated patient. Non-routine blood tests. Managing the latex allergy patient (type 1 and type 4 reactions). Latex indicators. Sample handling - non-routine procedures. Drug trials and research projects.
M08 - Special Tests and Sample Handling Procedures:
A look at sample collection at specific times of day and night,
samples that are protected from light, collected on ice and
collected at body temperature. Procedures for each group - collection notes, analytic time, optimal collection time and notes for each group.
M09 - Advanced Phlebotomy Tasks:
Additional procedures. Maintaining POC equipment. Stock control and stock rotation. Quality control. Data entry. Product evaluation. Training and competency evaluation.
M10 - Alternative Environments:
A step-by-step look at non-clinical phlebotomy environments including private testing, DEFRA, forensic and police, cord blood collection, DNA analysis, veterinary services, overseas and volunteering.

PLEASE NOTE THAT PART 1 SHOULD BE COMPLETED
BEFORE JOINING US FOR YOUR PRACTICAL TRAINING

PART 2 (CLASSROOM)
MORNING , AFTERNOON OR EVENING SESSION:

1 - Welcome, introductions and overview:
- Classroom - health & safety briefing, schedule overview.
- Virtual Classroom - audio/visual checks and registration. Unpacking and overview of your training kit.
2 - Syringe and Needle (open system): Correct use and applications.
3 - Monovette (open and closed systems):
Using the Monovette system in aspiration mode - correct use and applications.
Using the Monovette system in evacuated mode - correct use and applications.
4 - IR Vein Detector:
Demonstration of the IR vein detector for assisting in detection of difficult veins.
5 - Veins in back of hand:
Detecting suitable veins in the back of the hand.
6 - POC testing:
Point of Care Testing - use of glucose meter to demonstrate a typical POC test procedure. Correct use and overview of other POC test devices.
7 - Using lancets (finger collection)
We look at the correct use of lancets for POC testing and whole blood micro-collection.
8 - Using lancets (heel collection)
We look at the correct use of lancets for neonatal blood spot tests (Guthrie Test).
9 - Capillary collection
Using glass capillary tubes for micro-collection. Correct use and handling.
10 - Microtube collection
Correct use of BD Microtainers (and similar micro-collection bottles) - collection and handling.

This course is supported with downloadable resources and may include extra video segments to reinforce your practical training.
 
(THE COURSE DELIVERY AWARDS SAME NATIONALLY RECOGNISED AND DUALLY ACCREDITED QUALIFICATION AS OUR VIRTUAL CLASSROOM COURSE VERSION)



The UK's first and only Level 4 qualification in Phlebotomy (equivalent to Ireland Level 6)

    FDSc (Foundation Degree Level) qualification

    Nationally Recognised certificate

    Dually accredited: Open College Network  and CPD

    Covers both aspirated and evacuated systems

    Covers specialised blood collection systems & methods

    Classroom or Virtual Classroom learning options

    Comprehensive Training Kit is provided when booking our Virtual Classroom option (yours to keep)

    Complete your training from beginner to advanced level

    This course either follows on from our Introduction to Phlebotomy Course  or can be combined with our introductory course as part of a course package (see below)

    Available to candidates who have completed (or are currently enrolled to complete) our Introduction to Phlebotomy Course or have previous phlebotomy practical experience.


Advanced Phlebotomy - Skills & Techniques (GPT005)

<p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">The industry standard course in UX research</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Master the research skills that make UX professionals so valuable. Become a confident, credible and effective user researcher with a globally recognised qualification.</p><hr fr-original-style="" style="border-color: var(--border-muted); border-style: solid; clear: both; break-after: page; user-select: none; box-sizing: border-box;"><p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Who is it for?</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">UX professionals Aspiring UX researchers</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Duration</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">16 weeks</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Commitment</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">3 hours per week</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Format</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Online, self-paced with live support and mentoring</p><p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></p><hr fr-original-style="" style="border-color: var(--border-muted); border-style: solid; clear: both; break-after: page; user-select: none; box-sizing: border-box;"><p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Why take this user research course:</strong></p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Gain the most in-demand skills* and boost your career in a thriving industry.</li><li fr-original-style="" style="box-sizing: border-box;">Learn a complete range of UX research methods. Expand your toolkit to conduct high-quality research at pace.</li><li fr-original-style="" style="box-sizing: border-box;">Become an insights expert. Translate findings into actionable insights and communicate them with conviction.</li><li fr-original-style="" style="box-sizing: border-box;">Showcase your expertise. Build a professional user research portfolio and earn a university credit-rated qualification.</li><li fr-original-style="" style="box-sizing: border-box;">Get the confidence to succeed. Count on our mentors, career advisors and student community throughout your journey.</li></ul><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">*Research is one of the top 10 most in-demand skills globally (LinkedIn, 2023).</p><hr fr-original-style="" style="border-color: var(--border-muted); border-style: solid; clear: both; break-after: page; user-select: none; box-sizing: border-box;"><section style="color: rgb(15, 21, 26); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(15, 21, 26);"><section style="color: rgb(15, 21, 26); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(15, 21, 26);"><section style="color: rgb(15, 21, 26); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(15, 21, 26);"><p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">A comprehensive, in-depth curriculum</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">This user research course has been created and validated by experts in UX research. It is credit-rated by Glasgow Caledonian University.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Self-paced learning gives you the flexibility to study in your own time. Monthly deadlines and submissions give you structure and accountability. The best of both worlds.</p></section><section style="color: rgb(15, 21, 26); box-sizing: border-box;" fr-original-style=" color: rgb(15, 21, 26);"><br fr-original-style="" style="box-sizing: border-box;"></section></section></section><p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Module 1</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Introduction to user research</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Understand the role of a UX researcher. Explore the types, methods and ethics of research.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Module 2</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Planning the research</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Learn how to build a research plan, collaborate with stakeholders, recruit participants and manage data.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Module 3</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Fundamental user research skills</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Master the core skills of interviewing and usability testing. Learn how to moderate and take notes.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Module 4</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Expanding your toolkit</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Explore qualitative research methods like ethnography, contextual enquiry, service safaris and diary studies.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Module 5</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Analysing qualitative research</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Learn to analyse research data and translate it into user goals, affinity diagrams, personas and journey maps.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Module 6</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Quantitative research</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Learn to design, conduct and analyse online surveys, A/B tests and more.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Module 7</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Communicating the research</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Learn how to report and present your findings with confidence.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Module 8</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">AI for user research</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Explore how AI tools can assist researchers.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Project</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Portfolio project</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Build a professional portfolio to showcase your research expertise.</p>

UX Design Institute 

User Research

Professional Certificate in User Research

Early Bird Price

<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">One hour webinar on special test navigation &ndash; hints and tips to go the right way and help the driver go quicker.
</p>

One hour webinar on special test navigation – hints and tips to go the right way and help the driver go quicker.


Learn lots of handy hints and tips on gaining time on special tests on targa road rallies and historic road rallies.

Rally Navigation - Special Tests Navigation

<div id="course-pills-1">Duration<p>5 Days</p><p>30 CPD hours</p>This course is intended for<p>This course is designed for IT professionals who want to develop penetration testing skills to enable them to identify information-system vulnerabilities and effective remediation techniques for those vulnerabilities. Target students who also need to offer practical recommendations for action to properly protect information systems and their contents will derive those skills from this course.  This course is also designed for individuals who are preparing to take the CompTIA PenTest+ certification exam PT0-002, or who plan to use PenTest+ as the foundation for more advanced security certifications or career roles. Individuals seeking this certification should have three to four years of hands-on experience performing penetration tests, vulnerability assessments, and vulnerability management.</p>Overview<p>After completing this course, you will be able to plan, conduct, analyze, and report on penetration tests, including the ability to:  Plan and scope penetration tests.  Conduct passive reconnaissance. Perform non-technical tests to gather information.  Conductive active reconnaissance.  Analyze vulnerabilities.  Penetrate networks.  Exploit host-based vulnerabilities.  Test applications.  Complete post-exploit tasks.  Analyze and report pen test results.</p><p>Security remains one of the hottest topics in IT and other industries. It seems that each week brings news of some new breach of privacy or security. As organizations scramble to protect themselves and their customers, the ability to conduct penetration testing is an emerging skill set that is becoming ever more valuable to the organizations seeking protection, and ever more lucrative for those who possess these skills. In this course, you will be introduced to some general concepts and methodologies related to pen testing, and you will work your way through a simulated pen test for a fictitious company.</p></div><div id="course-pills-2"><h3>1 - Outline</h3> <ul> <li>Lesson 1: Scoping Organization/Customer Requirements</li> <li>Lesson 2: Defining the Rules of Engagement</li> <li>Lesson 3: Footprinting and Gathering Intelligence</li> <li>Lesson 4: Evaluating Human and Physical Vulnerabilities</li> <li>Lesson 5: Preparing the Vulnerability Scan</li> <li>Lesson 6: Scanning Logical Vulnerabilities</li> <li>Lesson 7: Analyzing Scanning Results</li> <li>Lesson 8: Avoiding Detection and Covering Tracks</li> <li>Lesson 9: Exploiting the LAN and Cloud</li> <li>Lesson 10: Testing Wireless Networks</li> <li>Lesson 11: Targeting Mobile Devices</li> <li>Lesson 12: Attacking Specialized Systems</li> <li>Lesson 13: Web Application-Based Attacks</li> <li>Lesson 14: Performing System Hacking</li> <li>Lesson 15: Scripting and Software Development</li> <li>Lesson 16: Leveraging the Attack: Pivot and Penetrate</li> <li>Lesson 17: Communicating During the PenTesting Process</li> <li>Lesson 18: Summarizing Report Components</li> <li>Lesson 19: Recommending Remediation</li> <li>Lesson 20: Performing Post-Report Delivery Activities</li> </ul></div><div id="course-pills-3"><h4>Additional course details:</h4><br /><p>Nexus Humans CompTIA Penetration Testing Certification (PenTest Plus) - (Exam PT0-002) training program is a workshop that presents an invigorating mix of sessions, lessons, and masterclasses meticulously crafted to propel your learning expedition forward. </p><p></p> This immersive bootcamp-style experience boasts interactive lectures, hands-on labs, and collaborative hackathons, all strategically designed to fortify fundamental concepts. <p></p>Guided by seasoned coaches, each session offers priceless insights and practical skills crucial for honing your expertise. Whether you're stepping into the realm of professional skills or a seasoned professional, this comprehensive course ensures you're equipped with the knowledge and prowess necessary for success.  <p></p>While we feel this is the best course for the CompTIA Penetration Testing Certification (PenTest Plus) - (Exam PT0-002) course and one of our Top 10 we encourage you to read the course outline to make sure it is the right content for you.  <p></p>Additionally, private sessions, closed classes or dedicated events are available both live online and at our training centres in Dublin and London, as well as at your offices anywhere in the UK, Ireland or across EMEA.<p></p></div>

Nexus Human

Penetration Testing

CompTIA Network+

IT Certifications

Certified Cyber Professional (CCP)

CompTIA A+

CompTIA Security+

CompTIA PenTest+ (PenTest)

<div id="course-pills-1">Duration<p>5 Days</p><p>30 CPD hours</p>This course is intended for<p>This course is intended for professional web developers who use Microsoft Visual Studio in an individual-based or team-based, small-sized to large development environment. Candidates for this course are interested in developing advanced web applications and want to manage the rendered HTML comprehensively. They want to create websites that separate the user interface, data access, and application logic.</p>Overview<p>Describe the Microsoft Web Technologies stack and select an appropriate technology to use to develop any given application.      Design the architecture and implementation of a web application that will meet a set of functional requirements, user interface requirements, and address business models.       Configure the pipeline of ASP.NET Core web applications using middleware, and leverage dependency injection across applications.     Develop a web application that uses the ASP.NET Core routing engine to present friendly URLs and a logical navigation hierarchy to users.     Create Views in an application that display and edit data and interact with Models and Controllers.     Connect an ASP.NET Core application to a database using Entity Framework Core.     Implement a consistent look and feel across an entire web application.     Write JavaScript code that runs on the client-side and utilizes the jQuery script library to optimize the responsiveness of an web application.     Add client side packages and configure Task Runners.     Run unit tests and debugging tools against a web application in Visual Studio 2022.     Write an application that authenticates and authorizes users to access content securely using Identity.     Build an application that resists malicious attacks.     Use caching to accelerate responses to user requests.     Use SignalR to enable two-way communication between client and server.     Describe what a Web API is and why developers might add a Web API to an application.     Describe how to package and deploy an ASP.NET Core web application from a development computer to a web server.</p><p>In this 5-day course, professional web developers will learn to develop advanced ASP.NET Core applications using .NET tools and technologies. The focus will be on coding activities that enhance the performance and scalability of the Web site application.</p></div><div id="course-pills-2"><h3>Module 1: Exploring ASP.NET Core</h3><ul> <li>Introducing of Microsoft Web Technologies</li> <li>Getting Started with Razor Pages in ASP.NET Core</li> <li>Introducing ASP.NET Core MVC</li></ul>  <h3>Module 2: Designing ASP.NET Core MVC Web Applications</h3><ul> <li>Planning in the Project Design Phase</li> <li>Designing Models, Controllers and Views</li></ul>  <h3>Module 3: Configure Middleware and Services in ASP.NET Core</h3><ul> <li>Configuring Middlewares</li> <li>Configuring Services</li></ul>  <h3>Module 4: Developing Controllers</h3><ul> <li>Writing Controllers and Actions</li> <li>Configuring Routes</li> <li>Writing Action Filters</li></ul>  <h3>Module 5: Developing Views</h3><ul> <li>Creating Views with Razor Syntax</li> <li>Using HTML Helpers and Tag Helpers</li> <li>Reusing Code in Views</li></ul>   <h3>Module 6: Developing Models</h3><ul> <li>Creating MVC Models</li> <li>Working with Forms</li> <li>Validating User Input</li></ul>  <h3>Module 7: Using Entity Framework Core in ASP.NET Core</h3><ul> <li>Introduction to Entity Framework Core</li> <li>Working with Entity Framework Core</li> <li>Use Entity Framework Core to connect to Microsoft SQL Server</li></ul>  <h3>Module 8: Using Layouts, CSS and JavaScript in ASP.NET Core</h3><ul> <li>Using Layouts</li> <li>Using CSS and JavaScript</li> <li>Using JavaScript Libraries</li></ul>   <h3>Module 9: Client-Side Development</h3><ul> <li>Applying Styles and Responsive Design</li> <li>Using Task Runners</li> <li>Looking at ASP.NET Core Blazor</li></ul>   <h3>Module 10: Testing and Troubleshooting</h3><ul> <li>Testing ASP.NET Core Applications</li> <li>Implementing an Exception Handling Strategy</li> <li>Logging ASP.NET Core Applications</li></ul>  <h3>Module 11: Managing Security</h3><ul> <li>Authentication in ASP.NET Core</li> <li>Authorization in ASP.NET Core</li> <li>Defending from Common Attack</li></ul>  <h3>Module 12: Performance and Communication Implementing a Caching Strategy</h3><ul> <li>Managing State</li> <li>Supporting Two-way Communication</li></ul>  <h3>Module 13: Implementing Web APIs</h3><ul> <li>Introducing Web APIs</li> <li>Developing a Web API</li> <li>Calling a Web API</li></ul>  <h3>Module 14: Hosting and Deployment</h3><ul> <li>Hosting and Deploying On-premises</li> <li>Deploying to Microsoft Azure</li> <li>Looking at Microsoft Azure Fundamentals</li></ul></div>

98 Courses in Leeds

Advanced Level - Assessing and Monitoring the Condition of Power Transformers by Oil Analysis

By EnergyEdge - Training for a Sustainable Energy Future

NPORS Excavator Micro (up to 1 Tonne) (N016)

By Dynamic Training and Assessments Ltd

NPORS Telescopic Handler Suspended Loads (N138)

By Dynamic Training and Assessments Ltd

Assessing the Water-Steam Chemistry Cycle in Thermal Power Plants

By EnergyEdge - Training for a Sustainable Energy Future

NPORS Suction Excavator (N021)

By Dynamic Training and Assessments Ltd

Operations, Maintenance and Testing of Power Transformer & Electric Motors

By EnergyEdge - Training for a Sustainable Energy Future

Advanced Reservoir Engineering

By EnergyEdge - Training for a Sustainable Energy Future

M.D.D SOCIAL CONFIDENCE COACHING PACKAGE (SOCIAL CONFIDENCE)

By Miss Date Doctor Dating Coach London, Couples Therapy

Electrical Generators, Excitation Systems and Governing Systems

By EnergyEdge - Training for a Sustainable Energy Future

Maintenance, Inspection, Diagnostics, Testing, Troubleshooting, Refurbishment, & Protective Systems For All Key Electrical Equipment

By EnergyEdge - Training for a Sustainable Energy Future

Search By Location