Stoke on Trent

<h2>Course Details</h2>Overview of the CITB TWCTC Course
The Temporary works coordinator training course (TWCTC) is designed to assist those on site who have responsibility for managing all forms of temporary works. The course has been designed to give confidence to senior management, and to ensure that those who engage contractors have an assessed standard of knowledge.This course will give the delegate a thorough knowledge of the temporary works coordinator (TWC) role. However, this does not make a delegate competent by itself. Competence requires other attributes, such as experience. 

Entry requirements
There are no formal entry requirements. However, delegates should hold, or be about to hold, the role of a TWC.

Assessment
Assessment will be by a multiple-choice examination at the end of the course. Delegates will also be expected to interact and participate during the course. 

The examination paper is compulsory and consists of 25 multiple-choice questions selected by CITB. It forms the basis of assessing whether a delegate has achieved a sufficient level of understanding to be awarded the Temporary works coordinator training course (TWCTC) certificate. 

The examination lasts for 30 minutes and must be completed within this time. 
The examination is open book.
The examination pass mark is 72%

Length of Course
This course is designed to be completed over two consecutive days. Delegates are required to attend both days (14 hours) and to pass the end-of-course assessment to be eligible for certification.

The natural progression from this course would be to either the Site management safety training scheme (SMSTS) or Director's role for health and safety (DRHS) course, where duties allow. 

The course is supported by a number of organisations, including the Temporary Works forum, CECA, Build UK, HSE and FMB. This enables transferability of the training within the industry. Temporary works are safety- and business-critical and require careful coordination. An accepted way of achieving this is through the adoption of the management process outlined in BS 5975:2019, which introduces the temporary works coordinator (TWC) as a key figure. This course explains the role and its overall management context. Temporary works on both smaller and larger sites can be high risk. Therefore, understanding the essentials of good risk and safety management, as outlined in BS 5975:2019, is relevant for projects of all sizes.

Course Details
Overview of the CITB TWCTC Course
The Temporary works coordinator training course (TWCTC) is designed to assist those on site who have responsibility for managing all forms of temporary works. The course has been designed to give confidence to senior management, and to ensure that those who engage contractors have an assessed standard of knowledge.This course will give the delegate a thorough knowledge of the temporary works coordinator (TWC) role. However, this does not make a delegate competent by itself. Competence requires other attributes, such as experience. Entry requirements
There are no formal entry requirements. However, delegates should hold, or be about to hold, the role of a TWC. Assessment
Assessment will be by a multiple-choice examination at the end of the course. Delegates will also be expected to interact and participate during the course. The examination paper is compulsory and consists of 25 multiple-choice questions selected by CITB. It forms the basis of assessing whether a delegate has achieved a sufficient level of understanding to be awarded the Temporary works coordinator training course (TWCTC) certificate. The examination lasts for 30 minutes and must be completed within this time. The examination is open book.
The examination pass mark is 72% Length of Course
This course is designed to be completed over two consecutive days. Delegates are required to attend both days (14 hours) and to pass the end-of-course assessment to be eligible for certification. The natural progression from this course would be to either the Site management safety training scheme (SMSTS) or Director's role for health and safety (DRHS) course, where duties allow. The course is supported by a number of organisations, including the Temporary Works forum, CECA, Build UK, HSE and FMB. This enables transferability of the training within the industry. Temporary works are safety- and business-critical and require careful coordination. An accepted way of achieving this is through the adoption of the management process outlined in BS 5975:2019, which introduces the temporary works coordinator (TWC) as a key figure. This course explains the role and its overall management context. Temporary works on both smaller and larger sites can be high risk. Therefore, understanding the essentials of good risk and safety management, as outlined in BS 5975:2019, is relevant for projects of all sizes. 

You Can Do It .Training

Citb

Certificate in Teaching Program (CTP)

Certificate of Completion of Training (CCT)

CSCS (Construction Skills Certification Scheme)

Site Management Safety Training Scheme (SMSTS)

Engineering Construction Industry Training (ECITB)

This course is designed to assist those on site who have responsibility for managing all forms of...

CITB Temporary Works Coordinator On-Site

<h2>Course Details</h2>Overview of the CITB SMSTS-R Course
The CITB Site Managers Safety Training Scheme course is designed for delegates who have previously passed the full Site management safety training scheme (SMSTS) course or subsequent refresher course, and can provide proof of attendance. It aims to bring health and safety knowledge up-to-date, as well as giving a thorough overview of the legislative changes and their impact in the workplace. The course provides an opportunity to revisit the wide range of topics from the previous five-day course.

Entry requirements
The refresher course is only for delegates who have previously passed the five-day SMSTS or subsequent refresher course, and hold a valid SMSTS certificate. Evidence must be provided to the training provider of their eligibility.

Assessment
Successful completion of the course requires the delegate to pass an exam paper at the end of the course. 

The paper consists of 25 questions, selected by CITB, covering all aspects of the course. The exam paper must be taken at the end of the course. 
Each paper has: 
• 18 multiple choice questions (each worth one mark) 
• 7 questions in multi-response or short written answer format (each worth two marks)

The exam pass mark is 81% (26 out of 32). The exam lasts for 35 minutes and must be completed within this time under exam conditions. Delegates are permitted to use the Construction site safety - The comprehensive guide (GE700) publication for the last 15 minutes of the exam.

Length of Course
This is a two-day course. Delegates are required to complete the full course (15 hours) to be eligible for certification.

The course aims to bring health and safety knowledge up-to-date, as well as giving a thorough overview of the legislative changes and their impact in the workplace. The course provides an opportunity to revisit the wide range of topics from the previous five-day course.

Course Details
Overview of the CITB SMSTS-R Course
The CITB Site Managers Safety Training Scheme course is designed for delegates who have previously passed the full Site management safety training scheme (SMSTS) course or subsequent refresher course, and can provide proof of attendance. It aims to bring health and safety knowledge up-to-date, as well as giving a thorough overview of the legislative changes and their impact in the workplace. The course provides an opportunity to revisit the wide range of topics from the previous five-day course. Entry requirements
The refresher course is only for delegates who have previously passed the five-day SMSTS or subsequent refresher course, and hold a valid SMSTS certificate. Evidence must be provided to the training provider of their eligibility. Assessment
Successful completion of the course requires the delegate to pass an exam paper at the end of the course. The paper consists of 25 questions, selected by CITB, covering all aspects of the course. The exam paper must be taken at the end of the course. Each paper has: • 18 multiple choice questions (each worth one mark) • 7 questions in multi-response or short written answer format (each worth two marks) The exam pass mark is 81% (26 out of 32). The exam lasts for 35 minutes and must be completed within this time under exam conditions. Delegates are permitted to use the Construction site safety - The comprehensive guide (GE700) publication for the last 15 minutes of the exam. Length of Course
This is a two-day course. Delegates are required to complete the full course (15 hours) to be eligible for certification. The course aims to bring health and safety knowledge up-to-date, as well as giving a thorough overview of the legislative changes and their impact in the workplace. The course provides an opportunity to revisit the wide range of topics from the previous five-day course.


Site Safety Supervisor

Construction Safety

Site Supervisor

SSSTS

This course is for you if you have previously passed the Site Management Safety Training Scheme...

CITB SMSTS Refresher (2 Days) (On-Site)

<h2>Course Details</h2>If no dates are available, please contact the office on 01782 438813 for our next dates. 

This course gives delegates a better understanding of safety and the assessment of risk when working within confined spaces, keeping individuals and those around them safe.

ð Course Contents
Understand the legislation applying to Confined Space work
Understand Hazards associated with Confined Space
Undertake Risk Assessments for Confined Space work
Develop Safe Systems of Work and Safe Methods of Work for Confined Space operations (Including Risk Assessments, Method Statements, Rescue Plans and Permit to Work)
Safety Person (Top Man) Responsibilities
Understand the mechanism of atmosphere testing and monitoring
Develop, install and maintain emergency plans and procedures
Maintain records and documents for Confined Space work

If no dates are available please call the team on 01782 438813 for available dates.

Course Details
If no dates are available, please contact the office on 01782 438813 for our next dates. This course gives delegates a better understanding of safety and the assessment of risk when working within confined spaces, keeping individuals and those around them safe. ð Course Contents
Understand the legislation applying to Confined Space work
Understand Hazards associated with Confined Space
Undertake Risk Assessments for Confined Space work
Develop Safe Systems of Work and Safe Methods of Work for Confined Space operations (Including Risk Assessments, Method Statements, Rescue Plans and Permit to Work)
Safety Person (Top Man) Responsibilities
Understand the mechanism of atmosphere testing and monitoring
Develop, install and maintain emergency plans and procedures
Maintain records and documents for Confined Space work If no dates are available please call the team on 01782 438813 for available dates.

First Aid At Work

Health & Safety Awareness

Confined Space

Safety Awareness

This 1/2 day course gives delegates a better understanding of safety and the assessment of risk.

Confined Space Awareness (On-Site)

<h2>Course Details</h2>Overview of the CITB SMSTS Course
The CITB Site Managers Safety Training Scheme course is designed for site managers, or aspiring site managers. It is designed for those with responsibility for managing, monitoring, implementing and reporting in a construction environment.

Assessment
To successfully achieve the course, delegates must:
Complete all four core exercises
Pass the trainer review and
Pass the end of course exam

The trainer review provides a pass/fail based on the delegate's performance and engagement in the core exercises and engagement in the course overall. Details of this are provided in XA6T.

The paper consists of 25 questions, selected by CITB, covering all aspects of the course. The exam must be taken at the end of the course. Each
Exam paper has:
18 multiple choice questions (each worth one mark)
7 questions in multi-response or short written answer format (each worth two marks)

The exam pass mark is 81% (26 out of 32). The exam lasts for 35 minutes and must be completed within this time under exam conditions. Delegates are permitted to use the Construction site safety - The comprehensive guide (GE700) publication and the Construction site management delegate workbook (XA6) for the last 15 minutes of the exam.

Length of Course
This is a five-day course. Delegates are required to complete the full course (37.5 hours) to be eligible for certification.

The course covers relevant health, safety and environmental legislation affecting safe working in the building, construction and civil engineering industries. It highlights the need for risk assessment in the workplace, the implementation of the necessary control measures, and adequate communication to sustain a health and safety culture among the workforce. 

The SMSTS course is endorsed by Build UK as the standard training for all construction managers.

Course Details
Overview of the CITB SMSTS Course
The CITB Site Managers Safety Training Scheme course is designed for site managers, or aspiring site managers. It is designed for those with responsibility for managing, monitoring, implementing and reporting in a construction environment. Assessment
To successfully achieve the course, delegates must:
Complete all four core exercises
Pass the trainer review and
Pass the end of course exam The trainer review provides a pass/fail based on the delegate's performance and engagement in the core exercises and engagement in the course overall. Details of this are provided in XA6T. The paper consists of 25 questions, selected by CITB, covering all aspects of the course. The exam must be taken at the end of the course. Each
Exam paper has:
18 multiple choice questions (each worth one mark)
7 questions in multi-response or short written answer format (each worth two marks) The exam pass mark is 81% (26 out of 32). The exam lasts for 35 minutes and must be completed within this time under exam conditions. Delegates are permitted to use the Construction site safety - The comprehensive guide (GE700) publication and the Construction site management delegate workbook (XA6) for the last 15 minutes of the exam. Length of Course
This is a five-day course. Delegates are required to complete the full course (37.5 hours) to be eligible for certification. The course covers relevant health, safety and environmental legislation affecting safe working in the building, construction and civil engineering industries. It highlights the need for risk assessment in the workplace, the implementation of the necessary control measures, and adequate communication to sustain a health and safety culture among the workforce. The SMSTS course is endorsed by Build UK as the standard training for all construction managers. 

Construction Design & Management (CDM)

This course covers all relevant legislation affecting safe working in the building, construction...

CITB SMSTS (5 Days) (On-Site)

<h2>Course Details</h2>This highly-regarded course gives team leaders, supervisors and managers, the training they need to manage health and safety effectively. Delegates will learn about safety and risk management in the workplace. This course is created for up to 16 delegates.

ð Course content
Introduction and overview of the Health and Safety Law
Responsibilities of Supervisors and Managers
Assessing risks - definitions, factors to consider when carrying out a risk assessment
Risk control selection and the best methods to choose, including consideration of 'reasonably
practicable'

Course Details
This highly-regarded course gives team leaders, supervisors and managers, the training they need to manage health and safety effectively. Delegates will learn about safety and risk management in the workplace. This course is created for up to 16 delegates. ð Course content
Introduction and overview of the Health and Safety Law
Responsibilities of Supervisors and Managers
Assessing risks - definitions, factors to consider when carrying out a risk assessment
Risk control selection and the best methods to choose, including consideration of 'reasonably
practicable'

Occupational Health & Safety

Workplace Health & Safety

Health & Safety

IOSH

This highly-regarded course gives team leaders, supervisors and managers, the training they need...

IOSH Managing Safely (On Site - 3 Days)

<h2>Course Details</h2>This course concentrates on the legal requirements for risk assessments in the organisation and the assessments and practical application. This course will give delegates the ability to carry out suitable and sufficient risk assessments.

ð Course Contents
Health and safety legislation
The management of health and safety at work regulations
Workplace accidents (causation)
The risk assessments process, understanding the key steps
Undertaking a practical risk assessment
Half day

Course Details
This course concentrates on the legal requirements for risk assessments in the organisation and the assessments and practical application. This course will give delegates the ability to carry out suitable and sufficient risk assessments. ð Course Contents
Health and safety legislation
The management of health and safety at work regulations
Workplace accidents (causation)
The risk assessments process, understanding the key steps
Undertaking a practical risk assessment
Half day

Fire Risk Assessment

Risk Assessment

Health & Safety At Work

This course concentrates on the legal requirements for risk assessments in the organisation and...

Risk Assess. & Method Statement On-Site

<h2>Course Details</h2>Overview of the CITB SSSTS Course
The CITB Site supervision safety training scheme (SSSTS) course is designed for those who have, or are about to acquire, supervisory responsibilities. The course covers all relevant legislation and other aspects which affect safe working in the building, construction and civil engineering industries. It highlights the need for risk assessment in the workplace, the implementation of the necessary control measures, and adequate communication to sustain a health and safety culture among the workforce. 

Entry requirements
Delegates should hold, or be about to hold, the role of a supervisor. Delegates must be competent in English at site supervisor level. 

Assessment
Assessment will be by an end of course examination and the trainer review. 

The examination paper is compulsory and consists of 25 questions, selected by CITB, covering all aspects of the course. The examination pass mark is 80% (24 out of 30). The paper consists of 22 multiple choice questions and three short written questions. There are four safety critical questions in each exam paper. The delegate must answer all four of these questions correctly to pass the exam. The multiple-choice questions are worth 1 point each, whereas written questions can score between 1-3 marks. 

Delegates will need to pass all three elements of the trainer review to gain a pass. 
The three elements of the trainer review are as follows: 
Exercise - overall, thinking about the delegate's performance in the group exercise, did they work well as part of the team?
Has the delegate actively engaged with the course and the group? 
Has the learner completed the toolbox talk?
All three elements will be either a pass (yes) or fail (no) and all three elements will need to achieve a pass for the delegate to pass this element of the course. 

Length of Course
This is a two-day course. Delegates are required to complete the full course (15 hours) to be eligible for certification. 

A natural progression from this course would be to attend the Site Management Safety Training Scheme (SMSTS) course. 

The SSSTS course is endorsed by Build UK and exceeds the standard set by CITB for construction supervisors training.

Course Details
Overview of the CITB SSSTS Course
The CITB Site supervision safety training scheme (SSSTS) course is designed for those who have, or are about to acquire, supervisory responsibilities. The course covers all relevant legislation and other aspects which affect safe working in the building, construction and civil engineering industries. It highlights the need for risk assessment in the workplace, the implementation of the necessary control measures, and adequate communication to sustain a health and safety culture among the workforce. Entry requirements
Delegates should hold, or be about to hold, the role of a supervisor. Delegates must be competent in English at site supervisor level. Assessment
Assessment will be by an end of course examination and the trainer review. The examination paper is compulsory and consists of 25 questions, selected by CITB, covering all aspects of the course. The examination pass mark is 80% (24 out of 30). The paper consists of 22 multiple choice questions and three short written questions. There are four safety critical questions in each exam paper. The delegate must answer all four of these questions correctly to pass the exam. The multiple-choice questions are worth 1 point each, whereas written questions can score between 1-3 marks. Delegates will need to pass all three elements of the trainer review to gain a pass. The three elements of the trainer review are as follows: Exercise - overall, thinking about the delegate's performance in the group exercise, did they work well as part of the team?
Has the delegate actively engaged with the course and the group? Has the learner completed the toolbox talk?
All three elements will be either a pass (yes) or fail (no) and all three elements will need to achieve a pass for the delegate to pass this element of the course. Length of Course
This is a two-day course. Delegates are required to complete the full course (15 hours) to be eligible for certification. A natural progression from this course would be to attend the Site Management Safety Training Scheme (SMSTS) course. The SSSTS course is endorsed by Build UK and exceeds the standard set by CITB for construction supervisors training. 

Scaffolding Supervisor

This course provides a basic understanding of health & safety duties and responsibilities...

CITB SSSTS (2 Days) (On-Site)

<h2>Course Details</h2>Overview of the CITB SSSTS-R Course
This refresher course is for delegates who have previously passed the two-day Site supervision safety training scheme (SSSTS) course and can provide proof of successful attendance. 

Entry requirements
The refresher course is only for delegates who have previously passed the two-day Site supervision safety training scheme (SSSTS) course and can provide proof of successful attendance.

Assessment
Assessment will be by an exam paper at the end of the course. 

The examination paper is compulsory and consists of 25 questions, selected by CITB, covering all aspects of the course. The examination pass mark is 80% (24 out of 30). The paper consists of 22 multiple choice questions and three short written questions. There are four safety critical questions in each exam paper. The delegate must answer all four of these questions correctly to pass the exam. The multiple choice questions are worth 1 point each, whereas written questions can score between 1-3 marks. 

The exam paper forms the basis of assessment of whether or not a delegate has successfully achieved a satisfactory level of understanding to be awarded the Site supervision safety training scheme refresher (SSSTS-R) certificate. The examination lasts for 30 minutes and must be completed within this time. Delegates are permitted to use the Construction site supervision (GE706) publication for the last ten minutes of the examination period. 

Length of Course
This is a one-day course. Delegates are required to complete the full course (7.5 hours). 

It aims to bring health and safety knowledge up-to-date, as well as giving a thorough overview of the legislative changes and their impact in the workplace. The course includes a wide range of topics which have been affected by changes to procedures, and builds upon the material in the original course.

Course Details
Overview of the CITB SSSTS-R Course
This refresher course is for delegates who have previously passed the two-day Site supervision safety training scheme (SSSTS) course and can provide proof of successful attendance. Entry requirements
The refresher course is only for delegates who have previously passed the two-day Site supervision safety training scheme (SSSTS) course and can provide proof of successful attendance. Assessment
Assessment will be by an exam paper at the end of the course. The examination paper is compulsory and consists of 25 questions, selected by CITB, covering all aspects of the course. The examination pass mark is 80% (24 out of 30). The paper consists of 22 multiple choice questions and three short written questions. There are four safety critical questions in each exam paper. The delegate must answer all four of these questions correctly to pass the exam. The multiple choice questions are worth 1 point each, whereas written questions can score between 1-3 marks. The exam paper forms the basis of assessment of whether or not a delegate has successfully achieved a satisfactory level of understanding to be awarded the Site supervision safety training scheme refresher (SSSTS-R) certificate. The examination lasts for 30 minutes and must be completed within this time. Delegates are permitted to use the Construction site supervision (GE706) publication for the last ten minutes of the examination period. Length of Course
This is a one-day course. Delegates are required to complete the full course (7.5 hours). It aims to bring health and safety knowledge up-to-date, as well as giving a thorough overview of the legislative changes and their impact in the workplace. The course includes a wide range of topics which have been affected by changes to procedures, and builds upon the material in the original course. 

SIA Training

Site supervisor safety training scheme refresher (SSSTS-R)

CITB SSSTS Refresher (1 Day) (On-Site)

Liverpool

We run regular Certified NLP Practitioner and Master Practitioner training for small groups in Liverpool or at your premises nationwide.&nbsp;1 to 1 coaching and short courses for businesses are by arrangement. Call us to discuss.Our <a href="https://www.nlpliverpool.com/index.html" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">website</a> always contains up-to-date course information and we encourage you to call us to discuss your exact requirements. We are happy to adapt course content and work to your time and budget constraints.

We run regular Certified NLP Practitioner and Master Practitioner training for small groups in Liverpool or at your premises nationwide. 
1 to 1 coaching and short courses for businesses are by arrangement. Call us to discuss.
Our website always contains up-to-date course information and we encourage you to call us to discuss your exact requirements. We are happy to adapt course content and work to your time and budget constraints.

NLP Liverpool Ltd

Stress Management

Coaching & Consulting Business

Career Development

Personal Development

Neuro-Linguistic Programming (NLP)

Business Communication Skills

NLP Practitioner

Confidence

Coaching

Self Esteem & Confidence

Business Communication

Wellness Coach

Communication Skills

Certified NLP Training and Business Coaching

London

Manchester

We are committed to directing you toward the most suitable educational course considering your personal circumstances, educational needs, and career aspirations.

We are committed to directing you toward the most suitable educational course considering your personal circumstances, educational needs, and career aspirations.

EU Network

Foundation Year, Bachelors degree, Masters, no IELTS needed, Student finance support 

We will help you to find the right course for you

Milton Keynes 

<div data-testid="richTextElement" id="isPasted" fr-original-style="" style="box-sizing: border-box;"><h2 fr-original-style="" style="box-sizing: border-box;">INTRAMUSCULAR, INTRADERMAL &amp; SUBCUTANEOUS INJECTION COURSE (GPT601) CLASSROOM or VIRTUAL CLASSROOM (with online theory)</h2></div><section fr-original-style="" style="box-sizing: border-box;"><div data-hook="bgLayers" data-motion-part="BG_LAYER" fr-original-style="" style="box-sizing: border-box;"><div data-testid="colorUnderlay" fr-original-style="" style="box-sizing: border-box;"></div><div data-motion-part="BG_MEDIA" fr-original-style="" style="box-sizing: border-box;"></div></div><div data-testid="columns" fr-original-style="" style="box-sizing: border-box;"><div data-hook="bgLayers" data-motion-part="BG_LAYER" fr-original-style="" style="box-sizing: border-box;"><div data-testid="colorUnderlay" fr-original-style="" style="box-sizing: border-box;"></div><div data-motion-part="BG_MEDIA" fr-original-style="" style="box-sizing: border-box;"></div></div><div data-mesh-id="comp-kl8214n52inlineContent" data-testid="inline-content" fr-original-style="" style="box-sizing: border-box;"><div data-mesh-id="comp-kl8214n52inlineContent-gridContainer" data-testid="mesh-container-content" fr-original-style="" style="box-sizing: border-box;"><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;">Learn how to administer vaccines or injections ...&nbsp;</div><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;"><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Nationally Recognised Qualification</li><li fr-original-style="" style="box-sizing: border-box;">Includes IM, ID and Sub-Cut Injection methods</li><li fr-original-style="" style="box-sizing: border-box;">OCN Accredited - Level 4 (Foundation Degree - FDSc)</li><li fr-original-style="" style="box-sizing: border-box;">Covers all steps to safely perform a vaccination</li><li fr-original-style="" style="box-sizing: border-box;">Use same techniques and skills for aesthetic therapies</li><li fr-original-style="" style="box-sizing: border-box;">Includes B12, Vitamin C and other treatments</li><li fr-original-style="" style="box-sizing: border-box;">Essential qualification for all injections</li><li fr-original-style="" style="box-sizing: border-box;">Basic understanding of English language required</li><li fr-original-style="" style="box-sizing: border-box;">OPEN TO ALL APPLICANTS</li></ul><div data-testid="richTextElement" id="isPasted" fr-original-style="" style="box-sizing: border-box;">About this course</div><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;">Learning Outcomes</div><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;">After the course</div><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;">PART 1 - Theory: complete online at home or work and download a certificate of completionPART 2 - Skills and Practical Development: Attend in the Classroom or Virtual ClassroomVaccination - all essential vaccines including Covid-19, Flu and other annual vaccinesInjections - Aesthetics - B12, Vit C etc.78 UK &amp; Eire training locationsOCN Accredited at Level 4 (FDSc)Medical training standards throughoutSkills for Health &amp; WHO compliantLearning Outcomes<div data-mesh-id="comp-kl8214o43inlineContent" data-testid="inline-content" id="isPasted" fr-original-style="" style="box-sizing: border-box;"><div data-mesh-id="comp-kl8214o43inlineContent-gridContainer" data-testid="mesh-container-content" fr-original-style="" style="box-sizing: border-box;"><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;">Train up to point of first vaccination or injection&nbsp;All theory and practical skills required to perform a safe procedureCovers all essential theory and skill-set development to meet medical standardsUnderstand the procedures used to set up &nbsp;a manage and administer a vaccinePost-injection management and how to avoid critical complicationsCorrect client care and aftercareIncludes legal, consent and documentationAfter the course<div data-mesh-id="comp-kl8214oainlineContent" data-testid="inline-content" id="isPasted" fr-original-style="" style="box-sizing: border-box;"><div data-mesh-id="comp-kl8214oainlineContent-gridContainer" data-testid="mesh-container-content" fr-original-style="" style="box-sizing: border-box;"><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;">Safely and competently administer a vaccine or drug treatment (ie. B12)Correct client management before, during injection and safe after-careUnderstanding equipment types and appropriate choicesUnderstand vaccine management controlAppreciate legal and professional responsibilitiesOffer injection therapies to clients - vitamin supplementsAdminister in hospitals, GP Surgeries and Outreach Centres</div></div></div></div></div></div></div></div></div></div></div></section>

INTRAMUSCULAR, INTRADERMAL & SUBCUTANEOUS INJECTION COURSE (GPT601)
CLASSROOM or VIRTUAL CLASSROOM (with online theory)
Learn how to administer vaccines or injections ... 
Nationally Recognised Qualification
Includes IM, ID and Sub-Cut Injection methods
OCN Accredited - Level 4 (Foundation Degree - FDSc)
Covers all steps to safely perform a vaccination
Use same techniques and skills for aesthetic therapies
Includes B12, Vitamin C and other treatments
Essential qualification for all injections
Basic understanding of English language required
OPEN TO ALL APPLICANTS
About this course
Learning Outcomes
After the course
PART 1 - Theory: complete online at
home or work and download a certificate of completion
PART 2 - Skills and Practical Development: Attend in the Classroom or Virtual Classroom
Vaccination - all essential vaccines including Covid-19, Flu and other annual vaccines
Injections - Aesthetics - B12, Vit C etc.
78 UK & Eire training locations
OCN Accredited at Level 4 (FDSc)
Medical training standards throughout
Skills for Health & WHO compliant
Learning Outcomes
Train up to point of first vaccination or injection 
All theory and practical skills required to perform a safe procedure
Covers all essential theory and skill-set development to meet medical standards
Understand the procedures used to set up a manage and administer a vaccine
Post-injection management and how to avoid critical complications
Correct client care and aftercare
Includes legal, consent and documentation
After the course
Safely and competently administer a vaccine or drug treatment (ie. B12)
Correct client management before, during injection and safe after-care
Understanding equipment types and appropriate choices
Understand vaccine management control
Appreciate legal and professional responsibilities
Offer injection therapies to clients - vitamin supplements
Administer in hospitals, GP Surgeries and Outreach Centres

Geopace Training

Immunisation & Vaccination

Immunisation

Allied Health

Allied Health Professions (AHP)

Injection

Vaccination

Vaccinator

Medicine & Nursing

Learn how to administer vaccines or injections ...

    Nationally Recognised Qualification

    Includes IM, ID and Sub-Cut Injection methods

    OCN Accredited - Level 4 (Foundation Degree - FDSc)

    Covers all steps to safely perform a vaccination

    Use same techniques and skills for aesthetic therapies

    Includes B12, Vitamin C and other treatments

    Essential qualification for all injections

    Basic understanding of English language required

    OPEN TO ALL APPLICANTS


Vaccination / Injection Course (GPT601)

General Admission

Targa Rally Webinar: Your Complete Guide to Getting Started
Are you curious about Targa Rallies and eager to dive into the excitement? This engaging webinar is your ultimate introduction to the world of Targa Rallies, designed for newcomers and enthusiasts alike.
What You’ll Learn:
The Basics of Targa Rallies: Discover the essential requirements to get started.
Events & Championships: Explore the wide range of Targa Rallies and championships available across the UK.
Timing & Navigation: Gain a clear understanding of how timing and navigation work in these events.
Special Tests: Learn what special tests are and how to tackle them with confidence.
Delivered by Motorsport UK Coach and Targa Rally Organiser Graham Raeburn, this webinar provides expert insights and practical advice to help you embark on your Targa Rally journey.
Join us to kickstart your rallying adventure!

Rally Navigation Training Services

Motorsport

Discover the world of Targa Rallies! Join our expert-led webinar to learn the basics, explore events and championships, and master timing, navigation, and special tests. Perfect for beginners!

Introduction to Targa Rallies

This driver CPC course Rules of The Road &amp; Fuel-Efficient Driving is suitable for LGV &amp; PCV and will cover:Requirements, Speed Limits, SMART Motorways, Highway Code, Road Signs, Bridge Strikes, Mobile Phones, Sat-Navs, Traffic Accident Procedure, Benefits of Fuel-Efficient Driving, Fuels and Fluids, Use of Vehicles,&nbsp;Other Factors,&nbsp;Driving Safely and Fuel Efficiently.All courses start at 07:45 hrs and finish at 15:45 hrsAll courses are 8 hours long with included 2 breaks of 15 minutes and a lunch break of 30 minutes.Approval: This course is registered with JAUPT as approved for Driver CPC qualification.Course Approval Number: CRS18242/475.On completion of the course all attendees will receive certificate of attendance.Please note repeat courses are not accepted by DVSA and by joining this course you confirm that you are aware of the modules covered by you and certify that, if you have covered these before you are happy to repeat the modules due to needing further education on the subject.

This driver CPC course Vulnerable Road Users is suitable for LGV & PCV and will cover:
Where Do We Encounter VRU’s? Who Are the VRU’s? Sharing Road Space, Route Planning, New Traffic Systems, Professional Drivers Role, Hazard Perception, Defensive Driving, Blindspots, Vehicle Safety Systems, Cyclists, Pedestrians, Motorcyclists, Horse Riders
All courses start at 07:45 hrs and finish at 15:45 hrs
All courses are 8 hours long with included 2 breaks of 15 minutes and a lunch break of 30 minutes.
Approval: This course is registered with JAUPT as approved for Driver CPC qualification.
Course Approval Number: CRS5814/475.
On completion of the course all attendees will receive certificate of attendance.
Please note repeat courses are not accepted by DVSA and by joining this course you confirm that you are aware of the modules covered by you and certify that, if you have covered these before you are happy to repeat the modules due to needing further education on the subject.

PETM

Road Safety

Driver CPC

Vulnerable Road Users - Online

This official BRCGS course enables participants with an in-depth understanding of the Standard in terms of the protocol, requirements and how to audit effectively. Participants will gain competency to assess compliance to the requirements of the Standard, including fundamental clauses, statements of intent, how to undertake a BRCGS audit, planning of the audit and reporting of the audit. Auditing fundamentals and techniques will be discussed including the auditor competency skills required of auditors auditing against Global Food Safety Initiative (GFSI) recognised certification programmes.Active learning will be used throughout the course utilising case study-based activities to encourage critical thinking and help explain how auditors with audit against the Standard. &nbsp;Participants must have a working knowledge of quality management systems and auditing within the relevant manufacturing sector, and have completed a hazard analysis and critical control points (HACCP) course of at least two days&#39; duration.In preparation for the course, participants must read and review a copy of the Standard including the glossary, which is available as a free download from the <a href="https://www.brcgs.com/store/" target="_blank" rel="noreferrer noopener" style="color: inherit; -webkit-user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: inherit;">BRCGS Store</a>, in addition to the pre-course materials provided.&nbsp;At the end of the course you will be assessed with an exam. Successful completion of this course, including the exam, forms part of the training necessary to become a BRCGS auditor. The steps necessary to complete your training must be arranged with a BRCGS-approved certification body.This course is part of the<a href="http://demo-brcgs.wearesigma.com/training/brcgs-professional/about-the-programme/" style="color: rgb(234, 118, 0); -webkit-user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(234, 118, 0);">&nbsp;BRCGS Professional recognition programme</a>.At the end of the course participants will be able to:&nbsp;<ul style="color: rgb(var(--color_25)); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));"><li fr-original-style="" style="box-sizing: border-box;">Explain the steps to managing an audit programme</li><li fr-original-style="" style="box-sizing: border-box;">Describe auditing fundamentals and techniques</li><li fr-original-style="" style="box-sizing: border-box;">Assess compliance to the requirements of the Standard and explain how compliance can be demonstrated to maintain food safety, quality, legality, and authenticity</li><li fr-original-style="" style="box-sizing: border-box;">Describe the scope of companies and products covered by the Standard</li><li fr-original-style="" style="box-sizing: border-box;">Describe steps to conduct a BRCGS audit including the preparation, planning, and reporting of the audit</li><li fr-original-style="" style="box-sizing: border-box;">Utilise and explain resource tools available for compliance and beneficial support from BRCGS</li></ul>

This official BRCGS course enables participants with an in-depth understanding of the Standard in terms of the protocol, requirements and how to audit effectively. Participants will gain competency to assess compliance to the requirements of the Standard, including fundamental clauses, statements of intent, how to undertake a BRCGS audit, planning of the audit and reporting of the audit. Auditing fundamentals and techniques will be discussed including the auditor competency skills required of auditors auditing against Global Food Safety Initiative (GFSI) recognised certification programmes.
Active learning will be used throughout the course utilising case study-based activities to encourage critical thinking and help explain how auditors with audit against the Standard. Participants must have a working knowledge of quality management systems and auditing within the relevant manufacturing sector, and have completed a hazard analysis and critical control points (HACCP) course of at least two days' duration.
In preparation for the course, participants must read and review a copy of the Standard including the glossary, which is available as a free download from the BRCGS Store, in addition to the pre-course materials provided. 
At the end of the course you will be assessed with an exam. Successful completion of this course, including the exam, forms part of the training necessary to become a BRCGS auditor. The steps necessary to complete your training must be arranged with a BRCGS-approved certification body.
This course is part of theBRCGS Professional recognition programme.
At the end of the course participants will be able to: 
Explain the steps to managing an audit programme
Describe auditing fundamentals and techniques
Assess compliance to the requirements of the Standard and explain how compliance can be demonstrated to maintain food safety, quality, legality, and authenticity
Describe the scope of companies and products covered by the Standard
Describe steps to conduct a BRCGS audit including the preparation, planning, and reporting of the audit
Utilise and explain resource tools available for compliance and beneficial support from BRCGS

Ask Sonia Limited

Food Safety

HACCP

Official BRCGS Food Safety Issue 9 Lead Auditor training course. 
Delivered online (Zoom) by a live BRCGS Approved Training Partner & Virtual Trainer.
Exam and Certificate fee included in the price.

BRCGS Food Safety Issue 9 - Lead Auditor (5 Days)

Broxburn

<h3 style="color: rgb(6, 49, 77); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(6, 49, 77);">Online courses take 5 days and are spread over two weeks.</h3>2024 Dates:&nbsp;October Week 1 - 14th, 15th, 16th / Week 2 - 23rd &amp; 24th&nbsp;2025 Dates:&nbsp;January&nbsp;Week 1 - 13th, 14th 15th /&nbsp;January&nbsp;Week 2 - 20th &amp; 21stApril&nbsp;Week 1 - 22nd, 23rd&nbsp;&amp; 24th / April&nbsp;Week 2 - 29th &amp; 30thEmber Compliance is delighted to offer a new FD&amp;FA BS5839-1 RQF Certified 5-Day Combined Course which encompasses all our FD&amp;FA courses from Introduction to Maintenance complete with RQF Exam at the end of the week.At the end of the 5 days, Learners will attain an RQF Award in the requirements of FD&amp;FA systems for non-domestic buildings BS 5839-1: 2017.As an accredited training provider affiliated with FireQual, recognised by both SQA and Ofqual, our courses are meticulously designed to align with the stringent standards outlined by the BAFE SP203-1 competence scheme.&nbsp;Details of the course are as follows:Module 1: Introduction to BS 5839-1 Learners are introduced to the requirements of BS 5839-1. This module includes basic principles of fire safety and an introduction to FD&amp;FA systems requirements within the boundaries of the various legal frameworks within the UK. Module 2: Design -BS 5839-1 In this module, emphasis is placed on the process of fire alarm design, enquiry, survey, design, certification and the appropriate recording and documentation requirements. Module 3: Installation -BS 5839-1 This module explores compliance with the standard and how the installer may deal with issues not known to the designer during the installation. Module 4: Commissioning - BS 5839-1 This module explores the process of commissioning, the requirements of testing and inspecting a newly installed system and how the commissioner may deal with issues not known to the designer and/or nonconformities with the standard.Module 5: Maintenance - BS 5839-1 This module explores the process of maintenance, the requirements of inspection &amp; servicing existing systems and how the maintainer may deal with non-conformities with the standard.Exam - L3 Award in the Requirements of FD&amp;FA Systems for Non-Domestic Buildings BS 5839-1: 2017 The RQF examination allows learners to demonstrate knowledge of BS 5839-1: 2017 as part of competence in the design, installation, commissioning, and maintenance of FD&amp;FA systems. Learners will demonstrate knowledge gained within our previous modules and industry experience.<div id="isPasted" fr-original-style="" style="box-sizing: border-box;">Notes:</div>Please bring a valid form of identification (such as a driving license or passport). This identification must be shown for verification purposes and recorded by our invigilatorAdditionally, please ensure that you have a non-scientific calculator with you for the exam. Calculators on phones are not permitted.<img src="https://images.cademy.co.uk/88d338d8-7dc4-4054-bf9e-401495774eee/80ddaf3c-277e-490d-aad9-f53db6cf9e22/original.png" style="width: 300px; display: block; vertical-align: top; margin: 5px auto; text-align: center; cursor: auto; padding: 0px 1px; user-select: none; max-width: 100%; position: relative; box-sizing: border-box;" fr-original-style="width: 300px; display: block; vertical-align: top; margin: 5px auto; text-align: center; cursor: auto;" fr-original-class="fr-draggable"><h3 style="color: rgb(6, 49, 77); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(6, 49, 77);">Online courses take 5 days and are spread over two weeks.</h3>October Dates:&nbsp;Week 1 - 14th, 15th, 16th&nbsp;Week 2 - 21st &amp; 22nd

Online courses take 5 days and are spread over two weeks.
2025 Dates: 
January Week 1 - 13th, 14th 15th / January Week 2 - 20th & 21st
April Week 1 - 22nd, 23rd & 24th / April Week 2 - 29th & 30th
July Week 1 - 14th, 15th & 16th / July Week 2 - 21st & 22nd
September Week 1 - 29th, 30th & 1st Oct / October Week 2 - 6th & 7th
Ember Compliance is delighted to offer a new FD&FA BS5839-1 RQF Certified 5-Day Combined Course which encompasses all our FD&FA courses from Introduction to Maintenance complete with RQF Exam at the end of the week.
At the end of the 5 days, Learners will attain an RQF Award in the requirements of FD&FA systems for non-domestic buildings BS 5839-1: 2017.
As an accredited training provider affiliated with FireQual, recognised by both SQA and Ofqual, our courses are meticulously designed to align with the stringent standards outlined by the BAFE SP203-1 competence scheme. 
Details of the course are as follows:
Module 1: Introduction to BS 5839-1
Learners are introduced to the requirements of BS 5839-1. This module includes basic principles of fire safety and an introduction to FD&FA systems requirements within the boundaries of the various legal frameworks within the UK.


Module 2: Design -BS 5839-1
In this module, emphasis is placed on the process of fire alarm design, enquiry, survey, design, certification and the appropriate recording and documentation requirements.


Module 3: Installation -BS 5839-1
This module explores compliance with the standard and how the installer may deal with issues not known to the designer during the installation.


Module 4: Commissioning - BS 5839-1
This module explores the process of commissioning, the requirements of testing and inspecting a newly installed system and how the commissioner may deal with issues not known to the designer and/or nonconformities with the standard.
Module 5: Maintenance - BS 5839-1
This module explores the process of maintenance, the requirements of inspection & servicing existing systems and how the maintainer may deal with non-conformities with the standard.
Exam - L3 Award in the Requirements of FD&FA Systems for Non-Domestic Buildings BS 5839-1: 2017
The RQF examination allows learners to demonstrate knowledge of BS 5839-1: 2017 as part of competence in the design, installation, commissioning, and maintenance of FD&FA systems. Learners will demonstrate knowledge gained within our previous modules and industry experience.
Notes:
Please bring a valid form of identification (such as a driving license or passport). This identification must be shown for verification purposes and recorded by our invigilator
Additionally, please ensure that you have a non-scientific calculator with you for the exam. Calculators on phones are not permitted.

Online courses take 5 days and are spread over two weeks.
October Dates: 
Week 1 - 14th, 15th, 16th 
Week 2 - 21st & 22nd

Ember Compliance

Fire Alarm

Professional Development

Engineer

Continuous Professional Development (CPD)

At the end of the 5 days, Learners will attain an RQF Award in the requirements of FD&FA systems for non-domestic buildings BS 5839-1: 2017.

FD&FA BS5839-1 RQF Certified 5-Day Combined Course - 2 Part Course

This combined HACCP and Food Safety Level 4 course, developed by STC and accredited by the CPD Accreditation Office, will give you a 2 in 1 qualification which is unique. Other training providers only provide these as separate qualifications, however STC has challenged this practice since &ldquo;you can&rsquo;t know HACCP without food safety, and you can&rsquo;t know food safety without HACCP!&rdquo; And at Ask Sonia Ltd, we whole heartedly agree!We are very proud to offer this accredited qualification to those involved with any and all aspects in a food business relating to HACCP &amp; Food Safety.&nbsp;Holders of the qualification will have the knowledge necessary to be an integral part of a food business as well as part of Technical &amp; Quality departments and HACCP team members, team leaders, consultants or trainers. The qualification is also suitable for those working in related industries, such as packaging, storage &amp; distribution.The qualification is also relevant to those owning/managing smaller food businesses to give them the underpinning knowledge to develop a HACCP study and understand the fundamentals of food safety.Attendees should already have knowledge of food safety hazards and controls, as this course will take the attendee through the intermediate levels at the start, and build up to provide the required advanced level of knowledge and understanding by the end of the course.HACCP and food safety training is regarded by the Foods Standards Agency as being important to maintaining good practice in the production of safe food.This course has been accredited by the CPD Accreditation Office for delivery, structure and content.

This combined HACCP and Food Safety Level 4 course, developed by STC and accredited by the CPD Accreditation Office, will give you a 2 in 1 qualification which is unique. Other training providers only provide these as separate qualifications, however STC has challenged this practice since “you can’t know HACCP without food safety, and you can’t know food safety without HACCP!” And at Ask Sonia Ltd, we whole heartedly agree!
We are very proud to offer this accredited qualification to those involved with any and all aspects in a food business relating to HACCP & Food Safety. 
Holders of the qualification will have the knowledge necessary to be an integral part of a food business as well as part of Technical & Quality departments and HACCP team members, team leaders, consultants or trainers. The qualification is also suitable for those working in related industries, such as packaging, storage & distribution.
The qualification is also relevant to those owning/managing smaller food businesses to give them the underpinning knowledge to develop a HACCP study and understand the fundamentals of food safety.
Attendees should already have knowledge of food safety hazards and controls, as this course will take the attendee through the intermediate levels at the start, and build up to provide the required advanced level of knowledge and understanding by the end of the course.
HACCP and food safety training is regarded by the Foods Standards Agency as being important to maintaining good practice in the production of safe food.
This course has been accredited by the CPD Accreditation Office for delivery, structure and content.

CPD accredited Advanced (Level 4) HACCP & Food Safety training course. 
Delivered online (Zoom) by a live tutor.
Exam and Certificate fee included in the price.

CPD Accredited Advanced Combined HACCP & Food Safety Level 4 (5 days)

This official BRCGS course enables participants to develop a full understanding of the general principles of the requirements of the Standard and gain competency to assess compliance to the requirements of the Standard, including fundamental clauses, statements of intent, how to undertake a BRCGS audit, planning of the audit and reporting of the audit.Active learning will be used throughout the course utilising case study-based activities to encourage critical thinking and help explain how auditors will audit against the Standard. &nbsp;Participants must have a working knowledge of quality management systems and auditing within the relevant manufacturing sector, and have completed a hazard analysis and critical control points (HACCP) course of at least two days&#39; duration.In preparation for the course, participants must read and review a copy of the Standard including the glossary, which is available as a free download from the BRCGS Store, in addition to the pre-course materials provided.At the end of the course, participants will be assessed with an exam. For candidates who are already qualified as a Lead Auditor on another scheme (eg IRCA, SQF, IFS, etc) successful completion of this course, including the exam, is recognised as part of the training necessary to become a BRCGS auditor. The steps necessary to complete your training must be arranged with a BRCGS-approved certification body.This course is part of the<a href="http://demo-brcgs.wearesigma.com/training/brcgs-professional/about-the-programme/" style="color: rgb(234, 118, 0); -webkit-user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(234, 118, 0);">&nbsp;BRCGS Professional recognition programme</a>.At the end of the course participants will be able to:&nbsp;<ul style="color: rgb(var(--color_25)); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));"><li fr-original-style="" style="box-sizing: border-box;">Assess compliance to the requirements of the Standard and explain how compliance can be demonstrated to maintain food safety, quality, legality, and authenticity</li><li fr-original-style="" style="box-sizing: border-box;">Describe the scope of companies and products covered by the Standard</li><li fr-original-style="" style="box-sizing: border-box;">Describe steps to conduct a BRCGS audit including the preparation, planning, and reporting of the audit</li><li fr-original-style="" style="box-sizing: border-box;">Utilise and explain resource tools available for compliance and beneficial support from BRCGS</li></ul>

This official BRCGS course enables participants to develop a full understanding of the general principles of the requirements of the Standard and gain competency to assess compliance to the requirements of the Standard, including fundamental clauses, statements of intent, how to undertake a BRCGS audit, planning of the audit and reporting of the audit.
Active learning will be used throughout the course utilising case study-based activities to encourage critical thinking and help explain how auditors will audit against the Standard. Participants must have a working knowledge of quality management systems and auditing within the relevant manufacturing sector, and have completed a hazard analysis and critical control points (HACCP) course of at least two days' duration.
In preparation for the course, participants must read and review a copy of the Standard including the glossary, which is available as a free download from the BRCGS Store, in addition to the pre-course materials provided.
At the end of the course, participants will be assessed with an exam. For candidates who are already qualified as a Lead Auditor on another scheme (eg IRCA, SQF, IFS, etc) successful completion of this course, including the exam, is recognised as part of the training necessary to become a BRCGS auditor. The steps necessary to complete your training must be arranged with a BRCGS-approved certification body.
This course is part of theBRCGS Professional recognition programme.
At the end of the course participants will be able to: 
Assess compliance to the requirements of the Standard and explain how compliance can be demonstrated to maintain food safety, quality, legality, and authenticity
Describe the scope of companies and products covered by the Standard
Describe steps to conduct a BRCGS audit including the preparation, planning, and reporting of the audit
Utilise and explain resource tools available for compliance and beneficial support from BRCGS

Auditor

Official BRCGS Food Safety Issue 9 course. 
Delivered online (Zoom) by a live BRCGS Approved Training Partner.
Exam and Certificate fee included in the price.

BRCGS Food Safety Issue 9 - For Auditors (3 Days)

This official BRCGS course enables participants to develop a full understanding of the general principles of the requirements of the Standard. It is designed to equip delegates with the knowledge of how to successfully implement the requirements of the Standard on site. Participants will discuss activities which develop a culture to maintain compliance and learn what to expect during the process of certification, including actions needed prior to, during and after the audit.Active learning will be used throughout the course utilising case study-based activities to encourage critical thinking and help explain how sites will implement the Standard.&nbsp;In preparation for the course, participants must read and review a copy of the Standard including the glossary, which is available as a free download from the <a href="https://www.brcgs.com/store/" target="_blank" rel="noreferrer noopener" style="color: inherit; user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: inherit;">BRCGS Store</a>, in addition to the pre-course materials provided. It is advised participants must have working knowledge of HACCP.At the end of the course, participants will be assessed with an exam.&nbsp;This course is part of the<a href="http://demo-brcgs.wearesigma.com/training/brcgs-professional/about-the-programme/" style="color: rgb(234, 118, 0); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(234, 118, 0);">&nbsp;BRCGS Professional recognition programme</a>.At the end of the course participants will be able to:&nbsp;<ul style="color: rgb(var(--color_25)); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));"><li fr-original-style="" style="box-sizing: border-box;">Explain what is required to comply with the requirements of the Standard</li><li fr-original-style="" style="box-sizing: border-box;">Describe the scope of companies and products covered by the Standard</li><li fr-original-style="" style="box-sizing: border-box;">Describe what to expect from your BRCGS audit&nbsp;</li><li fr-original-style="" style="box-sizing: border-box;">Prepare for an audit to the Standard</li><li fr-original-style="" style="box-sizing: border-box;">Apply resource tools available for compliance and support from BRCGS </li></ul>

This official BRCGS course enables participants to develop a full understanding of the general principles of the requirements of the Standard. It is designed to equip delegates with the knowledge of how to successfully implement the requirements of the Standard on site. Participants will discuss activities which develop a culture to maintain compliance and learn what to expect during the process of certification, including actions needed prior to, during and after the audit.
Active learning will be used throughout the course utilising case study-based activities to encourage critical thinking and help explain how sites will implement the Standard. 
In preparation for the course, participants must read and review a copy of the Standard including the glossary, which is available as a free download from the BRCGS Store, in addition to the pre-course materials provided. It is advised participants must have working knowledge of HACCP.
At the end of the course, participants will be assessed with an exam. 
This course is part of theBRCGS Professional recognition programme.
At the end of the course participants will be able to: 
Explain what is required to comply with the requirements of the Standard
Describe the scope of companies and products covered by the Standard
Describe what to expect from your BRCGS audit
Prepare for an audit to the Standard
Apply resource tools available for compliance and support from BRCGS

BRCGS Food Safety Issue 9 - For Sites (2 Days)

This qualification is aimed at those responsible for assisting in the development and maintenance of HACCP systems in a food manufacturing environment.The objective of the qualification is to provide learners with the knowledge necessary to be an integral part of a HACCP team in manufacturing and other related industries, for example those involved in distribution and storage. The qualification is aimed at learners who are already working in food manufacturing with knowledge of food hazards and controls.We are very proud to offer this accredited qualification to those involved with any and all aspects in a food business relating to HACCP and Food Safety.Holders of the qualification will have the knowledge necessary to be an integral part of a food business as well as part of Technical and Quality departments and HACCP team members. The qualification is also suitable for those working in related industries, such as packaging, storage and distribution.The qualification is also relevant to those owning/managing smaller food businesses to give them the underpinning knowledge to develop a HACCP study and understand the fundamentals of food safety.It is a good idea for attendees to already have some knowledge of food safety hazards and controls, however this is not essential as this course will provide the required knowledge and understanding.HACCP and food safety training is regarded by the Foods Standards Agency as being important to maintaining good practice in the production of safe food.This course has been accredited by the CPD Accreditation Office for delivery, structure and content. It is brought to you by a selected CIEH registered Training Partner.

This qualification is aimed at those responsible for assisting in the development and maintenance of HACCP systems in a food manufacturing environment.
The objective of the qualification is to provide learners with the knowledge necessary to be an integral part of a HACCP team in manufacturing and other related industries, for example those involved in distribution and storage. The qualification is aimed at learners who are already working in food manufacturing with knowledge of food hazards and controls.
We are very proud to offer this accredited qualification to those involved with any and all aspects in a food business relating to HACCP and Food Safety.
Holders of the qualification will have the knowledge necessary to be an integral part of a food business as well as part of Technical and Quality departments and HACCP team members. The qualification is also suitable for those working in related industries, such as packaging, storage and distribution.
The qualification is also relevant to those owning/managing smaller food businesses to give them the underpinning knowledge to develop a HACCP study and understand the fundamentals of food safety.
It is a good idea for attendees to already have some knowledge of food safety hazards and controls, however this is not essential as this course will provide the required knowledge and understanding.
HACCP and food safety training is regarded by the Foods Standards Agency as being important to maintaining good practice in the production of safe food.
This course has been accredited by the CPD Accreditation Office for delivery, structure and content. It is brought to you by a selected CIEH registered Training Partner.

CIEH Level 3 Intermediate HACCP certificate in manufacturing. 
Delivered online (Zoom) by a live tutor.
Exam and Certificate fee included in the price.

CIEH Intermediate (Level 3) Certificate in HACCP (2 Days)

This combined HACCP and Food Safety Level 3 course,&nbsp;developed by STC and accredited by the CPD Accreditation Office, will give you a 2 in 1 qualification which is unique. Other training providers only provide these as separate qualifications, however STC has challenged this practice since &ldquo;you can&rsquo;t know HACCP without food safety, and you can&rsquo;t know food safety without HACCP!&rdquo;&nbsp;And at Ask Sonia Ltd, we whole heartedly agree!We are very proud to offer this accredited qualification to those involved with any and all aspects in a food business relating to HACCP and Food Safety.Holders of the qualification will have the knowledge necessary to be an integral part of a food business as well as part of Technical and Quality departments and HACCP team members. The qualification is also suitable for those working in related industries, such as packaging, storage and distribution.The qualification is also relevant to those owning/managing smaller food businesses to give them the underpinning knowledge to develop a HACCP study and understand the fundamentals of food safety.It is a good idea for attendees to already have some knowledge of food safety hazards and controls, however this is not essential as this course will provide the required knowledge and understanding.HACCP and food safety training is regarded by the Foods Standards Agency as being important to maintaining good practice in the production of safe food.This course has been accredited by the CPD Accreditation Office for delivery, structure and content.

This combined HACCP and Food Safety Level 3 course, developed by STC and accredited by the CPD Accreditation Office, will give you a 2 in 1 qualification which is unique. Other training providers only provide these as separate qualifications, however STC has challenged this practice since “you can’t know HACCP without food safety, and you can’t know food safety without HACCP!” And at Ask Sonia Ltd, we whole heartedly agree!
We are very proud to offer this accredited qualification to those involved with any and all aspects in a food business relating to HACCP and Food Safety.
Holders of the qualification will have the knowledge necessary to be an integral part of a food business as well as part of Technical and Quality departments and HACCP team members. The qualification is also suitable for those working in related industries, such as packaging, storage and distribution.
The qualification is also relevant to those owning/managing smaller food businesses to give them the underpinning knowledge to develop a HACCP study and understand the fundamentals of food safety.
It is a good idea for attendees to already have some knowledge of food safety hazards and controls, however this is not essential as this course will provide the required knowledge and understanding.
HACCP and food safety training is regarded by the Foods Standards Agency as being important to maintaining good practice in the production of safe food.
This course has been accredited by the CPD Accreditation Office for delivery, structure and content.

CPD accredited Intermediate (Level 3) HACCP & Food Safety training course. 
Delivered online (Zoom) by a live tutor.
Exam and Certificate fee included in the price.

2652 Courses in Knutsford

CITB Temporary Works Coordinator On-Site

By You Can Do It .Training

CITB SMSTS Refresher (2 Days) (On-Site)

By You Can Do It .Training

Confined Space Awareness (On-Site)

By You Can Do It .Training

CITB SMSTS (5 Days) (On-Site)

By You Can Do It .Training

IOSH Managing Safely (On Site - 3 Days)

By You Can Do It .Training

Risk Assess. & Method Statement On-Site

By You Can Do It .Training

CITB SSSTS (2 Days) (On-Site)

By You Can Do It .Training

CITB SSSTS Refresher (1 Day) (On-Site)

By You Can Do It .Training

Certified NLP Training and Business Coaching

By NLP Liverpool Ltd

We will help you to find the right course for you

By EU Network

Search By Location