2621 Courses in Killamarsh

Enhance your knowledge in petroleum geochemistry with EnergyEdge's course on petroleum exploration. Enroll now!

EnergyEdge's course empowers you with in-depth knowledge of deepwater turbidites. Acquire the necessary skills and knowledge to excel in this specialized field of study.

About this Training Course This 3 full-day course will provide a comprehensive understanding of the various types of transformer maintenance including breakdown maintenance, preventive maintenance, total productive maintenance, condition-based maintenance, proactive maintenance, and reliability-centered maintenance. All the expected problems in dry and oil-filled transformers will be discussed in detail. All the diagnostics, troubleshooting and maintenance required to ensure adequate operation of transformers will be covered thoroughly. This course will focus on maximizing the efficiency, reliability, and longevity of all types of transformers by providing an understanding of all commissioning requirements, repair and refurbishment methods of transformers. Training Objectives Equipment Diagnostics and Inspection: Learn in detail all the diagnostic techniques and inspections required of critical components of transformers Equipment Testing: Understand thoroughly all the routine tests, type tests, and special tests required for the various types of transformers Equipment Maintenance and Troubleshooting: Determine all the maintenance and troubleshooting activities required to minimize transformer downtime and operating cost Equipment Repair and Refurbishment: Gain a detailed understanding of the various methods used to repair and refurbish transformers Efficiency, Reliability, and Longevity: Learn the various methods used to maximize the efficiency, reliability, and longevity of transformers Equipment Sizing: Gain a detailed understanding of all the calculations and sizing techniques used for transformers Design Features: Understand all the design features that improve the efficiency and reliability of transformers Equipment Selection: Learn how to select all types of transformers by using the performance characteristics and selection criteria that you will learn in this course Equipment Commissioning: Understand all the commissioning requirements for transformers Equipment Codes and Standards: Learn all the codes and standards applicable for transformers Equipment Causes and Modes of Failure: Understand the causes and modes of failure in transformers System Design: Learn all the requirements for designing different types of transformer systems Target Audience Engineers of all disciplines Managers Technicians Maintenance personnel Other technical individuals (this course is suitable for individuals who do not have an electrical background) Course Level Basic or Foundation Training Methods Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization. Each delegate will receive a copy of the following materials written by the instructor: Excerpt of the relevant chapters from the 'ELECTRICAL EQUIPMENT HANDBOOK' published by McGraw-Hill in 2003 (600 pages) Transformer Testing, Maintenance and Commissioning Manual (covering all the tests, maintenance activities, protective systems and all commissioning procedures for all types of transformers - 350 pages) Trainer Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him; Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011. Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003. Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012. Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999). Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999). Furthermore, he has received the following awards: The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016 The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996). The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East). Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983). Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada. POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information post training support and fees applicable Accreditions And Affliations

Our Level 3 Sports Massage courses will give you everything you need to become a Sports Massage Therapist in your own right and be able to practice straight away. To provide learners with the confidence, knowledge and skills required, to be able to provide a safe and professional treatment to a range of clients, helping in injury prevention, improving physical wellbeing and aiding the healing process of injuries. The course is split into 5 units: Anatomy & Physiology for Sports Massage Principles of Exercise, Fitness & Health Soft Tissue Dysfunction Professional Practice Sports Massage Techniques How will I be assessed? The assessment process includes the following; 5 Unit questions 1 Assignment 50 question multiple choice Anatomy & Physiology exam Practical Maintenance exam Practical Pre Event exam Practical Post exam Level 3 Sports Massage Courses To provide learners with the confidence, knowledge and skills required, to be able to provide a safe and professional treatment to a range of clients, helping in injury prevention, improving physical wellbeing and aiding the healing process of injuries. The course is split into 5 units: Anatomy & Physiology for Sports Massage Principles of Exercise, Fitness & Health Soft Tissue Dysfunction Professional Practice Sports Massage Techniques This Qualification Enables You To: Gain employment as a Sports Massage Therapist Gain insurance Set up your own business as a Sports Massage Therapist Progression on to the Level 4 Sports Massage Course How will I be assessed? The assessment process includes the following; 5 Unit questions 1 Assignment 50 question multiple choice Anatomy & Physiology exam Practical Maintenance exam Practical Pre Event exam Practical Post exam Venue BTST Academy & Clinic, Holly Farm, Clipstone Road, Edwinstowe, Nottingham, NG21 9JD Course delivery 11 days held over Weekends and 1x Friday Course Qualification Active IQ Sports Massage Diploma and Emergency First Aid * Course Dates 2024 MAY; 18th & 19th, 25th & 26th JUNE; 7th*, 8th & 9th, 29th, & 30th JULY; 13th & 14th or SEPT; 7th & 8th, 13th, 14th & 15th OCT; 12th & 13th, 26th, & 27th NOV; 9th & 10th Practical Assessment Date 14th July 2024 or 10th Nov 2024 Course days will run from 9:30am – 4:30pm Price £ 1400.00 Tutor Laura Simmons Assessor Clare Sargent & Laura Simmons Internal Verifier: Becky Tyler External Verifier: Will Mansford – Active IQ Awarding Body: Active IQ Payment on Booking; You can either select to pay:- The non refundable deposit of £400 or the Full Amount at time of booking. Paying a Deposit: If you select to pay the deposit you will receive communication via email to discuss & confirm a payment plan, all monies owed must be paid in full 1 week before course end date Student Finance: For finance options please call us on 01623 709942 ELCAS * 1x day First Aid course is not available for ELCAS funded learners Course Attendance: *We ask that all dates are attended but appreciate this is not always possible and therefore any missed days will need to be completed via home study. However if there are more than 2x days you are unable to attend, please contact us at btstacademy@outlook.com to discuss before booking. Refunds; Please note that your deposit is non-refundable. If you start your practical training and then withdraw from the course you will still be liable for the full course fee.

Our Level 4 Sports Massage courses will give you everything you need to take your Sports Massage qualification to the next level. The Level 4 Certificate in Sports Massage Therapy builds on your existing knowledge and skills gained from the level 3 Sports Massage course. This qualification will provide learners with a deeper knowledge and further skills to be able treat clients and correct common patterns of dysfunction. Many learners say I wish I had done my level 4 sooner!  Whilst level 3 Sports Massage course gives you the knowledge and skills to start work as a sports massage therapist Level 4 starts to teach you how to really treat your patients / clients. Delving into a greater level of A&P knowledge, teaching you advanced soft tissue techniques and exploring the common injuries patients / clients will present with.  Level 4 Sports Massage Courses The Level 4 Certificate in Sports Massage Therapy builds on your existing knowledge and skills gained from the level 3 Sports Massage course. This qualification will provide learners with a deeper knowledge and further skills to be able treat clients and correct common patterns of dysfunction. Course Focus: Assessment skills Learning of a range of injuries and dysfunctions Introduction and learning of some special tests. Development of massage techniques & skills Patient aftercare advice along with corrective exercise prescription knowledge This Qualification Enables You To: Progression on to a Level 5 Sports Therapy Course Progression onto an Osteopathy or Physiotherapy course How will I be assessed? The assessment process includes the following; x3 Unit Worksheets x1 Assignment x7 Observations x2 Critical evaluation Venue BTST Academy & Clinic, Holly Farm, Clipstone Road, Edwinstowe, Nottingham, NG21 9JD Course delivery Weekends Course Dates 2024 APRIL; Fri 5th, Sat 6th & Sun 7th APRIL; Fri 19th, Sat 20th & Sun 21st MAY; Fri 3rd MAY; Sat 11th & Sun 12th MAY; Fri 24th Course days will run from 9:30am – 4:30pm Price £ 1400.00 Course Content  For the course content and syllabus please click HERE Tutor Becky Tyler Assessor Becky Tyler & Laura Simmons Internal Verifier: Sarah Lane External Verifier: Will Mansford – Active IQ Awarding Body: Active IQ Payment on Booking; You can either select to pay:- The non refundable deposit of £400 or the Full Amount at time of booking. Paying a Deposit: If you select to pay the deposit you will receive communication via email to discuss & confirm a payment plan, all monies owed must be paid in full 1 week before the course start date ELCAS Funding: ELCAS Funding is available for this course Course Attendance: *We ask that all dates are attended but appreciate this is not always possible and therefore any missed days will need to be completed via home study. However if there are more than 2x days you are unable to attend, please contact us at btstacademy@outlook.com to discuss before booking. Refunds; Please note that your deposit is non-refundable. If you start your practical training and then withdraw from the course you will still be liable for the full course fee.

QA Level 2 Award In Basic Life Support For Adults And Children (RQF) Half day course Also called Basic Life Support, BLS, or BLS training Teaches the basics of first aid for adults, children and infants (babies) Useful for many occupations. Also available as a bolt-on to certain other courses, at just a third of the price. Benefits of this course: 1.1 million workers in Britain had an accident at work in 2014/2015 Of those, 2,700 were from the East Midlands On average, one out of every 370 people received an injury at work Children are prone to minor injuries, but can also suffer from serious ones More than 2 million children have accidents in the home for which they're taken to A&E every year. Under 5s account for 7% of all hospital emergency treatments This Level 2 Award in Basic Life Support for Adults and Children course teaches the skills and knowledge needed to provide basic life support for adults and children It is also useful for those who are already qualified in first aid, to refresh their skills and knowledge and broaden it to cover both adults and children This course is taught in a hands-on, practical way Course Contents: Managing an Unresponsive Casualty Recovery Position for an adult, a child and an infant (baby) CPR for an adult, a child and an infant (baby) Safe Use of an AED (Automated External Defibrillator) Choking for an adult, a child and an infant (baby) Accredited, Ofqual regulated qualification: Our Basic Life Support for Adults and Children's course is a nationally recognised, Ofqual regulated qualification accredited by Qualsafe Awards.This means that you can be rest assured that your Basic Life Support for Adults and Children's Certificate is a very good way to make sure you and your employees are trained in First Aid for both adults and children.The Ofqual Register number for this course is 603/2547/1

About this Virtual Instructor Led Training (VILT)  Electrification of the transportation sector will impact the power system in several ways. Besides the additional load, local impact on the grid needs to be managed by the grid operators. Simultaneously charging of many electric vehicles (EVs) might exceed the limits in specific locations. On the other hand, EVs can provide flexibility and other ancillary services that will help grid operators. This 3 half-day VILT course will provide a complete overview of integrating electric vehicles (EVs) into the power grid. It will cover the whole value chain from grid operations to the car battery. This includes the control room, possible grid reinforcement, demand side management and power electronics. This course will demonstrate the impact on the grid and solutions for a safe & cost-effective grid plan and operation, with examples of successful integration of EVs. The course will also provide vital knowledge about technology used for EVs such as power electronics, demand side management, communication and batteries. In this context, the focus will be on power electronics as it has the highest impact on the grid. The grid planning tool, pandapower, is introduced as an open source tool for power system modelling. The set-up of the training course allows for discussion and questions. Questions can be formulated by the participants upfront or during the training. This course is delivered in partnership with Fraunhofer IEE. Training Objectives At the end of this course, the participants will: Understand the charging options for EVs and its impact on the grid and batteries Identify system services for EVs with regards to voltage quality at the point of common coupling Discover what are the 'grid friendly' and grid supporting functions in EVs Uncover the different applications, standards and data researched on EVs Examine the application of a grid planning tool (pandapower) for power system modelling Be able to develop code snippets with pandapower Apply and execute a code example for power system modelling with pandapower Target Audience EV and grid project developers and administrators Power grid operators and planners EPC organisations involved in grid development EV/ battery manufacturers and designers EV transport planners and designers Government regulators and policy makers Training Methods The VILT will be delivered online in 3 half-day sessions comprising 4 hours per day, with 2 x 10 minutes breaks per day, including time for lectures, discussion, quizzes and short interactive exercises. Additionally, some self-study will be requested. Participants are invited but not obliged to bring a short presentation (10 mins max) on a practical problem they encountered in their work. This will then be explained and discussed during the VILT. A short test or quiz will be held at the end of every session/day. Trainer Our first course expert is Head of Department Converters and Electrical Drive Systems at Fraunhofer IEE and Professor for Electromobility and Electrical Infrastructure at Bonn-Rhein-Sieg University of Applied Sciences. He received his engineering degree in automation in 2008 by the THM Technische Hochschule Mittelhessen (FH Giessen-Friedberg). Afterwards he studied power engineering at University of Kassel and received his diploma certificate in 2010. In 2016 he received the Ph.D. (Dr.-Ing.) from the University of Hannover. The title of his dissertation is Optimized multifunctional bi-directional charger for electric vehicles. He has been a researcher at the Fraunhofer IEE in Kassel since 2010 and deals with power converters for electric vehicles, photovoltaics and wind energy. His current research interests include the bidirectional inductive power transfer, battery charger and inverter as well as new power electronic components such as SiC MOSFETs and chokes. Additionally, our key expert is Chairman of the IEEE Joint IAS/PELS/IES German Chapter and a member of the International Scientific Committee of the EPE Association. Our second course expert is deputy head of energy storage department at Fraunhofer IEE. Prior to this he was the Director of Grid Integration department at SMA Solar Technology AG, one of the world's largest manufacturers of PV power converters. Before joining SMA, our course expert was manager of the Front Office System Planning at Amprion GmbH (formerly RWE TSO), one of the four German transmission system operators. He holds a degree of electrical engineering of the University of Kassel, Germany. In 2003 he finished his Ph.D. (Dr.-Ing.) on the topic of wind power forecasting at the 'Institute of Solar Energy Supply Technology' (now Fraunhofer IEE) in Kassel. In 2004 he started his career at RWE TSO with main focus on wind power integration and congestion management. Our course expert is chairman of the IEC SC 8A 'Grid Integration of Large-capacity Renewable Energy (RE) Generation' and has published several papers about grid integration of renewable energy source and forecasting systems on books, magazines, international conferences and workshops. Our third course expert is Research Associate at Fraunhofer IEE. He is actively working on different projects related to the integration of electric vehicle charging into the electric distribution grid. The focus of this work concerns time series based simulations for grid planning and operation in order to investigate the effect of a future rollout of electric vehicles and charging infrastructure on economics e.g. costs for grid reinforcement. He completed his master degree (MSc.) in Business Administration and Engineering: Electrical Power Engineering at RWTH Aachen University, Germany. Our trainers are experts from Fraunhofer Institute for Energy Economics and Energy System Technology (Fraunhofer, IEE), Germany. The Fraunhofer IEE researches for the national and international transformation of energy supply systems POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information about post training coaching support and fees applicable for this. Accreditions And Affliations

Overview In this competitive era no matter how much hard work and solid efforts are contributed still, too many projects end up creating unneeded and unsellable products. There is a significant risk that the outcome of the project may not be relevant to the client/user requirements or become outdated when needs change. Here is where Design Thinking and Agile Management play their role. The combination of Agile and Design Thinking should be used in order to achieve impactful outcomes. Agile and design thinking together works well and gives an effective approach to product development, one that results in efficient resolutions to significant problems. In this course, you'll learn how to define and determine what's important to a user primary in the process, to frontload value, by directing your team on testable narratives about the user and generating an effectively shared perspective. For more dates and Venue, Please email sales@gbacorporate.co.uk

This half-day Suicide First Aid Lite training course gives learners the knowledge and tools to understand that suicide is one of the most preventable deaths and some basic skills can help someone with thoughts of suicide stay safe from their thoughts and stay alive.

This half-day workshop delivered face-to-face or online is designed for anyone in your organisation that wants to become a Neurodiversity Champion - someone who wants to educate and change the way that Neurodiversity is viewed in the workplace.