Name: ONSITE COURSE : TEKNEK - 5 day Bespoke Onsite Electrical Course
Price: 500 GBP
Availability: InStock

Clay Cross

Technique Learning Solutions

Gas ACS Training

General Admission

Gas ACS Assessment - CKR1

This industrial electrical maintenance course is designed to enable candidates who have a small amount of electrical knowledge to gain recognised qualifications and skills to enable them to enter an industrial environment and work as a industrial electrician. The industrial electrical maintenance course will include a large amount of practical, enabling the candidate to install, fault find, design and wiring up control panels, using a variety of different methods. Industrial electrical maintenance course aims The aim of the industrial electrical maintenance course is to provide solid foundations upon which the participant will be able to build and develop. Emphasis is given to providing the necessary skills, which will allow the participant to carry out routine electrical tasks. It is also made clear that a participant needs to identify and know their own limitations, allowing tasks to be carried out in a safe manner, not giving rise to danger. If your looking for industrial electrician training this course is for you.

ELM-TIEM10

PLC5 - (AB) RS Logix 5000 - Intermediate

Gas ACS Assessment - CENWAT (Central Heating Boilers and Water Heaters)

Gas ACS Assessment - CENWAT

BS 7671 18th Edition Wiring Regulations 1 Day: Parkeray Ltd 24 King William Street | London | EC4R 9AT M 07970 137959 | DDI 020 7939 8349

BS 7671 18th Edition Wiring Regulations 1 Day

ELM - 2377-22 2 Day

This Programmable Logic Controllers Beginner course aims to enable maintenance personnel to be able to understand the Programmable Logic Controller program, make minor modifications to the program and to fault find quickly using both software and printouts.

Programmable Logic Controllers – Beginner

Domestic Gas Heating Installer - New Entrants

ONSITE COURSE :    TEKNEK -  5 day Bespoke Onsite Electrical Course

Scotland

We have an extensive range of PLC training courses available covering all PLC manufacturers and levels of expertise from the complete novice to the advanced. ALL of our training courses can be tailoured to your own requirements. ALL our courses will be based on the relevant software and hardware. We aim to make ALL our courses as practical as possible, leading to ‘real world’ skills and not just theoretical skills. No prior knowledge is required for this course as it starts from scratch and assumes no previous experience, you will reach the skilled level where you can look at becoming a programmer, get into engineering maintenance in an industrial environment, fault find or make amendments to programs, this is the course for you. The ‘Typical’ 5 day course usually covers 2 or 3 of the major manufacturers, Siemens S7, Allen Bradley and Mitsubishi (This can be amended to other manufacturers if you have a particular requirement). The course aims to be 90% practical, as we believe the easiest way to learn is to do it! Every student works on their own dedicated training rig and computer, enabling you to get the most from the course. A full set of course notes and a USB drive full of other manuals is provided at the end of the course. We can also cover a wide range of manufacturers including : Siemens Step 5 PLC Training (Using Step 5, Quadriga or Others) Allen Bradley PLC 3 &amp;amp; 5 Training (AB6200 Software) RSLogix 5 PLC Training SLC PLC Training (RSLogix 500) ControlLogix PLC Training (RS Logix5000) MicroLogix PLC Training (RSLogix 500) S7-200 PLC Training (Step 7 Micro) S7-300 PLC Training (Step 7 or TIA Portal) S7-400 PLC Training (Step 7 or TIA Portal) Kuhnke PLC Training (Kubes) Omron PLC Training (Syswin) Modicon PLC Training (ProWorx and Others) Mitsubishi PLC Training (Medoc, GX Developer, GPP &amp;amp; Others) Toshiba PLC Training GE Fanuc PLC Training GEM 80 PLC Training Telemecanique PLC Training Most other PLC manufacturer training undertaken. We also cover a wide range of SCADA Systems to enable engineers to modify and add to existing screens, fault find through systems, set up communications etc.

PLC 5 Day

What is the AM2 assessment? The AM2 assessment is an industry recognised trade test designed to evidence that candidates have gained all relevant and safety-critical competencies during their training process. It provides a single standard that has been agreed upon by employers within the electrical industry, giving a reliable and trusted guarantee of safe, high-quality skills for the electrotechnical industry. Who is this for? This is aimed at apprentices who are coming to the end of their training for the JIB apprentice training scheme and the Installation of modern apprenticeships. This course is also for experienced electricians, specifically those who are looking at taking the experienced worker route (AM2E.) There are a range of assessments for candidates based on their level: AM2 – This is for candidates undertaking the JIB mature candidate assessments and those following the level three NVQ who isn’t an apprentice. AM2S – This is for electrotechnical apprentices who are training against the apprenticeship standard AM2E – This is for experienced workers who are completing the experienced worker assessment. Please note: this can only be taken once you have gained the experienced worker qualification, proof must be provided before booking the AM2 assessment. What does this assessment consist of? Overall, the AM2 is an in-depth assessment carrying out tasks to show what you have learnt on your training. It is a practical assessment with five sections (six for AM2E and AM2S) and a short online component. Candidates will be expected to install, connect, terminate, inspect, test, commission and diagnose faults, following installation specifications provided and any relevant statutory and non-statutory regulations on: A three-phase distribution board and subcircuit A central heating/sustainable energy system Lighting and power circuits A data cabling system A safety services circuit and device Installation of containment systems (AM2E and AM2S only) Candidates will complete timed tasks in equipped areas that contain typical electrical installation wiring systems – all work must comply with BS7671 Wiring Regulations, industry best practice, and meet the requirements of relevant health and safety legislation. The assessment will be carried out in strict exam conditions across 2.5 days. Do I need an AM2 certificate to work as an electrician? Apprentices must pass their AM2 test in their final year to complete their apprenticeship. Also, if the apprenticeship standard is not being followed, an AM2 certificate and a level three NVQ is required to gain a gold card. If you are already working as an electrician, you will not need an AM2 certificate. If you are training to be an electrician and are registering for your NVQ level three in Electrical Installation or Maintenance, the electrotechnical diploma now includes the AM2. The AM2 certification is an industry recognised and something that many employers will actively seek when hiring new staff. It can also be attractive to potential customers.

AM2/AM2E/AM2S Assessment

We have an extensive range of PLC training courses available covering all PLC manufacturers and levels of expertise from the complete novice to the advanced. ALL of our training courses can be tailoured to your own requirements. ALL our courses will be based on the relevant software and hardware. We aim to make ALL our courses as practical as possible, leading to ‘real world’ skills and not just theoretical skills. No prior knowledge is required for this course as it starts from scratch and assumes no previous experience, you will reach the skilled level where you can look at becoming a programmer, get into engineering maintenance in an industrial environment, fault find or make amendments to programs, this is the course for you. The ‘Typical’ 10 day level 3 course usually covers 2 or 3 of the major manufacturers, Siemens S7, Allen Bradley and Mitsubishi (This can be amended to other manufacturers if you have a particular requirement). The course aims to be 90% practical, as we believe the easiest way to learn is to do it! Every student works on their own dedicated training rig and computer, enabling you to get the most from the course. A full set of course notes and a USB drive full of other manuals is provided at the end of the course. We can also cover a wide range of manufacturers including : Siemens Step 5 PLC Training (Using Step 5, Quadriga or Others) Allen Bradley PLC 3; 5 Training (AB6200 Software) RSLogix 5 PLC Training SLC PLC Training (RSLogix 500) ControlLogix PLC Training (RS Logix5000) MicroLogix PLC Training (RSLogix 500) S7-200 PLC Training (Step 7 Micro) S7-300 PLC Training (Step 7 or TIA Portal) S7-400 PLC Training (Step 7 or TIA Portal) Kuhnke PLC Training (Kubes) Omron PLC Training (Syswin) Modicon PLC Training (ProWorx and Others) Mitsubishi PLC Training (Medoc, GX Developer, GPP &amp;amp; Others) Toshiba PLC Training GE Fanuc PLC Training GEM 80 PLC Training Telemecanique PLC Training Most other PLC manufacturer training undertaken. We also cover a wide range of SCADA Systems to enable engineers to modify and add to existing screens, fault find through systems, set up communications etc.

PLC 10

We have an extensive range of PLC 18 training courses available covering all PLC manufacturers and levels of expertise from the complete novice to the advanced. ALL of our PLC 18 training courses can be tailored to your own requirements. ALL our PLC 18 courses will be based on the relevant software and hardware. We aim to make ALL our courses as practical as possible, leading to ‘real world’ skills and not just theoretical skills.

PLC 18

We have an extensive range of PLC 13 training courses available covering all PLC manufacturers and levels of expertise from the complete novice to the advanced. ALL of our PLC 13 training courses can be tailored to your own requirements. ALL our PLC 13 courses will be based on the relevant software and hardware. We aim to make ALL our courses as practical as possible, leading to ‘real world’ skills and not just theoretical skills.

PLC 13

We have an extensive range of PLC 15 training courses available covering all PLC manufacturers and levels of expertise from the complete novice to the advanced. ALL of our PLC 15 training courses can be tailored to your own requirements. ALL our PLC 15 courses will be based on the relevant software and hardware. We aim to make ALL our courses as practical as possible, leading to ‘real world’ skills and not just theoretical skills.

PLC 15

Chelmsford

Stratford

This five-day course is a must for anyone who is considering or already working in a role with site manager responsibilities. This course covers all relevant legislation affecting safe working in the building, construction, and civil engineering industries.
It is endorsed by Build UK as the standard training for all construction managers.
Aims
To give a clear understanding of health, safety, welfare, and environmental legislation that affects your management role. It highlights the need for risk assessment in the workplace, the implementation of the necessary control measures and adequate communication to sustain a health and safety culture within the workforce.
Course Content
To give a clear understanding of health, safety, welfare, and environmental legislation that affects your management role. It highlights the need for risk assessment in the workplace, the implementation of the necessary control measures and adequate communication to sustain a health and safety culture within the workforce.
Course Content
• Health, safety, welfare and environmental legislation affecting your daily work
• New guidance and industry best practice
• Duties and responsibilities with regards to health, safety, welfare, and the environment
• Safe working
Prerequisites
This course is for you if you’re considering, or already have management responsibilities for planning, organising, monitoring, controlling and administering groups of staff e.g. site manager.
Assessment
At the end of this course, all delegates will have a clear understanding of controlling health and safety on site from a manager’s role.
Certificate
The certification for this course is valid for 5 years and is endorsed by Build UK as a standard training for all site managers.
To remain certified in this area, you will need to take a refresher course before the expiry date on your certificate, otherwise the full course will need to be retaken.
Instructions
Please note all online Site Management Safety Training Scheme courses with the venue “Online” will be delivered by a tutor over a video call.
This training will be delivered and assessed in English language; therefore, a good standard is required to complete the course.
Further attendee information will be sent in a separate email, please check your inbox.

SMC Safety Solutions

Site Management Safety Training Scheme (SMSTS) 5 day course

Our Site Management Safety Training Scheme (SMSTS) refresher training courses, available both online and in-person, are designed for managers and individuals in positions of authority who completed their original SMSTS training program less than three years ago.

Aims
Participants will undertake a concise yet equally engaging training program covering all essential aspects of enforcing health and safety codes of practice at construction sites. Topics include in-depth discussions on risk assessments and effective methods for monitoring and managing industry-specific hazards.
Instructions
For online courses labeled “Remote Learning,” a tutor will deliver the training via video call.
All SMSTS courses are delivered and assessed in English. Participants must have a good command of the language to successfully complete the program.
Additional attendee information will be provided via email. Please ensure you check your inbox.


Site Management Safety Training Scheme (SMSTS) Refresher

This two-day course is a must for anyone who is considering or already working in a role with supervisory responsibilities. This course provides an understanding of health, safety, welfare, and environmental issues. It highlights legal responsibilities and the need to promote health and safety to supervise effectively.
It is endorsed by Build UK as the standard training for all supervisors working on Build UK sites.
Aims
To give a clear understanding of health, safety, welfare, and environmental legislation that affects your supervisory role. To help you fulfil your responsibilities regarding health, safety, welfare, and the environment. To help you implement new guidance and industry best practice affected by changes.
Course Content
• Health and safety law and how it will apply to supervisors.
• Your supervisory responsibilities in controlling site safety.
• Risk assessments and the need for method statements.
• Effective site inductions, toolbox talks and method statement briefings.
• Monitoring site activities effectively.
• Timely intervention when bad practice is identified.
Prerequisites
This course is for you if you are considering, or already have, supervisory responsibilities.
Assessment
At the end of this course, all delegates will have a clear understanding of controlling health and safety on site from a supervisor’s role.
Certificate
This certification for this course is valid for 5 years and is endorsed by Build UK as a standard training for all supervisors.
To remain certified in this area, you will need to take a refresher course before the expiry date on your certificate, otherwise the full course will need to be retaken.
Instructions
Please note all Site Supervisor Training courses with the venue “Remote Learning” will be delivered by a tutor over a video call.
This training will be delivered and assessed in English language; therefore, a good standard is required to complete the course.
Further attendee information will be sent in a separate email, please check your inbox

Site Supervisor Training Scheme (SSSTS) - 2 Day Course

Get on the fast-track to achieving recognition as a BRCGS Professional with this 3-Day product safety management program.&nbsp;This 3-day session will comprise of 3 of the following 4 courses:&nbsp;<ul style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);"><li style="color: rgb(77, 77, 79); font-size: 16px; box-sizing: border-box;" fr-original-style="color: rgb(77, 77, 79); font-size: 16px;">Risk Assessment&nbsp;&ndash; This one-day course will provide delegates with a thorough understanding of risk assessment and enable them to use different risk assessment models. &nbsp;</li><li style="color: rgb(77, 77, 79); font-size: 16px; box-sizing: border-box;" fr-original-style="color: rgb(77, 77, 79); font-size: 16px;">Root Cause Analysis &ndash; This one-day course will provide delegates with a thorough understanding of root cause analysis (RCA) to know its importance and be able to perform it competently. &nbsp;</li><li style="color: rgb(77, 77, 79); font-size: 16px; box-sizing: border-box;" fr-original-style="color: rgb(77, 77, 79); font-size: 16px;">Validation and Verification&nbsp;&ndash; This one-day course will provide delegates with a thorough understanding of validation and verification, so they know the level of detail required for each process and are able to use validation and verification in practice. </li><li style="color: rgb(77, 77, 79); font-size: 16px; box-sizing: border-box;" fr-original-style="color: rgb(77, 77, 79); font-size: 16px;">VACCP&nbsp;&ndash; This one-day course&nbsp;will provide you with a thorough understanding of vulnerability assessment for food fraud and enable you to use techniques to better identify and mitigate risks associated to raw materials in the supply chain. </li></ul>The above courses are especially helpful when implementing some of the requirements in the BRCGS Standards.These courses form part of the requirement to achieve recognition as a BRCGS Professional. Full details of the requirements to complete the program can be found&nbsp;<a href="https://www.brcgs.com/training/brcgs-professional/about-the-programme/" target="_blank" style="color: rgb(234, 118, 0); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" id="isPasted" fr-original-style=" color: rgb(234, 118, 0);">here</a>. By booking the Fast Track program, a substantial saving is made on purchasing the courses individually (25% discount). Once you have purchased your Fast Track program, please contact us to confirm which 3 courses you have selected.

Course Summary

BRCGS Professional is a learning program that will give you international recognition for the key skills and knowledge essential for product safety management. As a BRCGS Professional you will be well-equipped to manage any GFSI-recognised standard in your business, and able to implement or manage product safety systems. BRCGS is the leading provider of GFSI-recognised Standards globally, respected for quality and brand protection assurance. 


This training program has been designed by the BRCGS Technical team, in response to demands from the industry for training on the skills necessary to implement effective product safety management program.


The courses are subject-specific, train the core skills needed for any product safety individual, and will help with maintaining any GFSI-recognised certification scheme.


The 3-day Fast Track program will comprise of 3 of the following 4 courses:

Risk Assessment – This one-day course will provide delegates with a thorough understanding of risk assessment and enable them to use different risk assessment models.
Root Cause Analysis – This one-day course will provide delegates with a thorough understanding of root cause analysis (RCA) to know its importance and be able to perform it competently.
Validation and Verification – This one-day course will provide delegates with a thorough understanding of validation and verification, so they know the level of detail required for each process and are able to use validation and verification in practice.
Vulnerability Assessment for Food Fraud Training – This one-day course will provide you with a thorough understanding of vulnerability assessment for food fraud and enable you to use techniques to better identify and mitigate risks associated to raw materials in the supply chain.

The above courses are especially helpful when implementing some of the requirements in the BRCGS Standards.

These courses form part of the requirement to achieve recognition as a BRCGS Professional. Full details of the requirements to complete the program can be found here.

By booking the Fast Track program, a substantial saving is made on purchasing the courses individually. Once you have purchased your Fast Track program, please email us to advise of which 3 courses you have selected.

On completion of the required courses, candidates will be awarded with a BRCGS Professional certificate and an electronic open badge for use on emails and LinkedIn.

Key learning objectives

Gaining certification as a BRCGS Professional will:
enhance your understanding of product safety management
enable you to apply skills to reduce risks associated with product safety
enable you to contribute as part of the brand protection team your company needs
raise your status as a valuable employee

Who should attend

All product safety personnel in food and packaging, storage and distribution and related industries – for example quality assurance managers, food technologists, category technologists and HACCP teams. 
Enrolment is free of charge for anyone working at a BRCGS certificated site and there is no limit to the amount of people that can join. 

Pre-requisites

There no particular pre-requisites stipulated by the BRCGS for this course :)

Programme Outline

Day 1 | Please consult the course page for the 1st course you have selected
Day 2 | Please consult the course page for the 2nd course you have selected
Day 3 | Please consult the course page for the 3rd course you have selected

Instructor credentials

This training course is delivered by experienced BRCGS ‘approved training partners’ (ATPs) and ‘approved virtual trainers’ (AVTs). This is our lovely team of trainers.

ASK SONIA LTD

Food Safety

Risk Assessment

HACCP

Official BRCGS Professional 3-Day Fast Track program.
Delivered online (Zoom) by a live BRCGS Approved Training Partner.
Exam and Certificate fee included in the price.

2809 Courses in Killamarsh

Gas ACS Training

By Technique Learning Solutions

Gas ACS Assessment - CKR1

By Technique Learning Solutions

ELM-TIEM10

By Technique Learning Solutions

PLC5 - (AB) RS Logix 5000 - Intermediate

By Technique Learning Solutions

Gas ACS Assessment - CENWAT

By Technique Learning Solutions

BS 7671 18th Edition Wiring Regulations 1 Day

By Technique Learning Solutions

ELM - 2377-22 2 Day

By Technique Learning Solutions

Programmable Logic Controllers – Beginner

By Technique Learning Solutions

Domestic Gas Heating Installer - New Entrants

By Technique Learning Solutions

ONSITE COURSE : TEKNEK - 5 day Bespoke Onsite Electrical Course

By Technique Learning Solutions

Search By Location