Nottinghamshire

Course information&nbsp;It is envisaged that by the end of this course of training the trainee operator will be able to answer questions on and perform the following:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as a plant operator.</li><li fr-original-style="" style="box-sizing: border-box;">Have a working knowledge of the manufacturer&rsquo;s handbook for the machine to be used and be familiar with other types of information sources and relevant legislation.</li><li fr-original-style="" style="box-sizing: border-box;">Be able to locate and identify steering, driving and braking controls and explain their functions conduct all pre-operational checks in accordance with manufacturers and legislative requirements and check all emergency lowering functions.</li><li fr-original-style="" style="box-sizing: border-box;">Safely mount and dismount the machine configure the machine for travel.</li><li fr-original-style="" style="box-sizing: border-box;">Configure the machine for travel and maneuver it safely on level/rough ground and inclines in open and confined areas.</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all necessary safety checks at the work area, including overhead and underground hazards maneuver the machine to work the area and correctly configure in readiness to carry out accessing tasks at various points up to full operating height.</li><li fr-original-style="" style="box-sizing: border-box;">Travel with platform raised (where applicable)</li><li fr-original-style="" style="box-sizing: border-box;">Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation.</li><li fr-original-style="" style="box-sizing: border-box;">Carry out all end of shift and shut down procedures.</li></ul>Entry requirements&nbsp;In order to be eligible to undertake NPORS testing.Good understanding of spoken and written English.__________________________________________________________________________________Assessment&nbsp;Assessment will be to NPORS standards consisting of a theory test and practical test. &nbsp;CertificationNPORS Traditional card &ndash;&nbsp;With the traditional card there is no requirements to complete an NVQ, a five-year card is issued and after five years reassessment is required.&nbsp;NPORS CSCS &ndash;&nbsp;To ensure that the operator can receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant.&nbsp;

Course information 
It is envisaged that by the end of this course of training the trainee operator will be able to answer questions on and perform the following:
Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as a plant operator.
Have a working knowledge of the manufacturer’s handbook for the machine to be used and be familiar with other types of information sources and relevant legislation.
Be able to locate and identify steering, driving and braking controls and explain their functions conduct all pre-operational checks in accordance with manufacturers and legislative requirements and check all emergency lowering functions.
Safely mount and dismount the machine configure the machine for travel.
Configure the machine for travel and maneuver it safely on level/rough ground and inclines in open and confined areas.
Conduct all necessary safety checks at the work area, including overhead and underground hazards maneuver the machine to work the area and correctly configure in readiness to carry out accessing tasks at various points up to full operating height.
Travel with platform raised (where applicable)
Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation.
Carry out all end of shift and shut down procedures.
Entry requirements 
In order to be eligible to undertake NPORS testing.
Good understanding of spoken and written English.
__________________________________________________________________________________
Assessment 
Assessment will be to NPORS standards consisting of a theory test and practical test. 
Certification
NPORS Traditional card – With the traditional card there is no requirements to complete an NVQ, a five-year card is issued and after five years reassessment is required. 
NPORS CSCS – To ensure that the operator can receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant. 

Dynamic Training and Assessments Ltd

Construction

CSCS (Construction Skills Certification Scheme)

NPORS

NPORS MEWP Boom (N108)

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Who Should Attend</h2>This course is aimed at candidates that require the knowledge and practical skills operate Road Rollers to compact a variety of ground. This course can be completed by both novice and experienced candidates. We also offer refresher tests.Novice course- 3 DaysExperienced worker tests- 1 day theory and practical assessment<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Course information</h2>Category 214 Road RollerIt is envisaged that by the end of this course of training the learner will be able to answer questions on and perform the following: ➢ Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operator ➢ Have a working knowledge of the manufacturer&rsquo;s handbook for the particular machine to be used ➢ Be able to locate and identify the major components of the machine and explain their functions ➢ Be able to locate and identify key controls and explain their functions ➢ Conduct all pre-operational checks in accordance with manufacturer&rsquo;s and legislative requirements ➢ Identify and maintain PPE appropriate for roller use ➢ Prepare the roller for use and operate machinery safely and efficiently ➢ Conduct all necessary safety checks at the work area ➢ Operate machinery safely and efficiently ➢ Environmental considerations ➢ Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation ➢ Carry out all end of shift and shut down procedures<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Assessment</h2>Assessment will be to NPORS standards consisting of a theory test and practical test.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Certification</h2>NPORS Traditional card &ndash; With the traditional card there is no requirements to complete an NVQ, a five year card is issued and after five years reassessment is required.NPORS CSCS &ndash; To ensure that the operator is able to receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant.

Who Should Attend
This course is aimed at candidates that require the knowledge and practical skills operate Road Rollers to compact a variety of ground. This course can be completed by both novice and experienced candidates. We also offer refresher tests.
Novice course- 3 Days
Experienced worker tests- 1 day theory and practical assessment
Course information
Category 214 Road Roller
It is envisaged that by the end of this course of training the learner will be able to answer questions on and perform the following:
➢ Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operator
➢ Have a working knowledge of the manufacturer’s handbook for the particular machine to be used
➢ Be able to locate and identify the major components of the machine and explain their functions
➢ Be able to locate and identify key controls and explain their functions
➢ Conduct all pre-operational checks in accordance with manufacturer’s and legislative
requirements
➢ Identify and maintain PPE appropriate for roller use
➢ Prepare the roller for use and operate machinery safely and efficiently
➢ Conduct all necessary safety checks at the work area
➢ Operate machinery safely and efficiently
➢ Environmental considerations
➢ Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation
➢ Carry out all end of shift and shut down procedures
Assessment
Assessment will be to NPORS standards consisting of a theory test and practical test.
Certification
NPORS Traditional card – With the traditional card there is no requirements to complete an NVQ, a five year card is issued and after five years reassessment is required.
NPORS CSCS – To ensure that the operator is able to receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant.

NPORS Road Roller (N214)

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Who Should Attend</h2>This course is aimed at candidates that require the knowledge and practical skills operate Forward Tipping Dumpers (mini) to transport and discharge loads. This course can be completed by both novice and experienced candidates. We also offer refresher tests.Novice course- 3 DaysExperienced worker tests- 1 day theory and practical assessment<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Course information</h2>Category N139 Forward tipping mini dumperIt is envisaged that by the end of this course of training the learner will be able to answer questions on and perform the following: ➢ Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operator ➢ Have a working knowledge of the manufacturer&rsquo;s handbook for the particular machine to be used ➢ Be able to locate and identify the major components of the machine and explain their functions ➢ Be able to locate and identify key controls and explain their functions ➢ Conduct all pre-operational checks in accordance with manufacturer&rsquo;s and legislative requirements ➢ Identify and maintain PPE appropriate for forward tipping mini dumper use ➢ Conduct all necessary safety checks at the work area ➢ Prepare the forward tipping mini dumper for use and operate safely and efficiently ➢ Attachments set correctly ready for operation ➢ Environmental considerations ➢ Storage and transport of forward tipping mini dumper / implements / attachments ➢ Carry out all end of shift and shut down procedures<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Assessment</h2>Assessment will be to NPORS standards consisting of a theory test and practical test.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Certification</h2>NPORS Traditional card &ndash; With the traditional card there is no requirements to complete an NVQ, a five year card is issued and after five years reassessment is required.NPORS CSCS &ndash; To ensure that the operator is able to receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant.

Who Should Attend
This course is aimed at candidates that require the knowledge and practical skills operate Forward Tipping Dumpers (mini) to transport and discharge loads. This course can be completed by both novice and experienced candidates. We also offer refresher tests.
Novice course- 3 Days
Experienced worker tests- 1 day theory and practical assessment
Course information
Category N139 Forward tipping mini dumper
It is envisaged that by the end of this course of training the learner will be able to answer questions on and perform the following:
➢ Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operator
➢ Have a working knowledge of the manufacturer’s handbook for the particular machine to be used
➢ Be able to locate and identify the major components of the machine and explain their functions
➢ Be able to locate and identify key controls and explain their functions
➢ Conduct all pre-operational checks in accordance with manufacturer’s and legislative
requirements
➢ Identify and maintain PPE appropriate for forward tipping mini dumper use
➢ Conduct all necessary safety checks at the work area
➢ Prepare the forward tipping mini dumper for use and operate safely and efficiently
➢ Attachments set correctly ready for operation
➢ Environmental considerations
➢ Storage and transport of forward tipping mini dumper / implements / attachments
➢ Carry out all end of shift and shut down procedures
Assessment
Assessment will be to NPORS standards consisting of a theory test and practical test.
Certification
NPORS Traditional card – With the traditional card there is no requirements to complete an NVQ, a five year card is issued and after five years reassessment is required.
NPORS CSCS – To ensure that the operator is able to receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant.

NPORS Forward Tipping Mini Dumper (N139)

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Who Should Attend</h2>This course is aimed at candidates that require the knowledge and practical skills operate Forward Tipping Dumpers to transport and discharge loads. This course can be completed by both novice and experienced candidates. We also offer refresher tests.Novice course- 3 DaysExperienced worker tests- 1 day theory and practical assessment<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Course information</h2>Category N204 Forward Tipping DumperIt is envisaged that by the end of this course of training the learner will be able to answer questions on and perform the following: ➢ Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operator ➢ Have a working knowledge of the manufacturer&rsquo;s handbook for the particular machine to be used ➢ Be able to locate and identify the major components of the machine and explain their functions ➢ Be able to locate and identify key controls and explain their functions ➢ Conduct all pre-operational checks in accordance with manufacturer&rsquo;s and legislative requirements ➢ Identify and maintain PPE appropriate for forward tipping dumper use ➢ Prepare the forward tipping dumper for use and operate safely and efficiently ➢ Conduct all necessary safety checks at the work area ➢ Attach and set trailers, ready for operation ➢ Environmental considerations ➢ Storage and transport of implements and attachments ➢ Carry out all end of shift and shut down procedures<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Assessment</h2>Assessment will be to NPORS standards consisting of a theory test and practical test.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Certification</h2>NPORS Traditional card &ndash; With the traditional card there is no requirements to complete an NVQ, a five year card is issued and after five years reassessment is required.NPORS CSCS &ndash; To ensure that the operator is able to receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant.

Who Should Attend
This course is aimed at candidates that require the knowledge and practical skills operate Forward Tipping Dumpers to transport and discharge loads. This course can be completed by both novice and experienced candidates. We also offer refresher tests.
Novice course- 3 Days
Experienced worker tests- 1 day theory and practical assessment
Course information
Category N204 Forward Tipping Dumper
It is envisaged that by the end of this course of training the learner will be able to answer questions on and perform the following:
➢ Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operator
➢ Have a working knowledge of the manufacturer’s handbook for the particular machine to be used
➢ Be able to locate and identify the major components of the machine and explain their functions
➢ Be able to locate and identify key controls and explain their functions
➢ Conduct all pre-operational checks in accordance with manufacturer’s and legislative
requirements
➢ Identify and maintain PPE appropriate for forward tipping dumper use
➢ Prepare the forward tipping dumper for use and operate safely and efficiently
➢ Conduct all necessary safety checks at the work area
➢ Attach and set trailers, ready for operation
➢ Environmental considerations
➢ Storage and transport of implements and attachments
➢ Carry out all end of shift and shut down procedures
Assessment
Assessment will be to NPORS standards consisting of a theory test and practical test.
Certification
NPORS Traditional card – With the traditional card there is no requirements to complete an NVQ, a five year card is issued and after five years reassessment is required.
NPORS CSCS – To ensure that the operator is able to receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant.

NPORS Forward Tipping Dumper (N204)

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Who Should Attend</h2>This course is aimed at candidates that require the knowledge and practical skills operate Rear Tipping Dumpers to transport and discharge loads. This course can be completed by both novice and experienced candidates. We also offer refresher tests.Novice course- 4 DaysExperienced worker tests- 1 day theory and practical assessment<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Course information</h2>Category N205It is envisaged that by the end of this course of training the learner will be able to answer questions on and perform the following: ➢ Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operator ➢ Have a working knowledge of the manufacturer&rsquo;s handbook for the particular machine to be used ➢ Be able to locate and identify the major components of the machine and explain their functions ➢ Be able to locate and identify key controls and explain their functions ➢ Conduct all pre-operational checks in accordance with manufacturer&rsquo;s and legislative requirements ➢ Identify and maintain PPE appropriate for rear tipping dumper use ➢ Conduct all necessary safety checks at the work area ➢ Prepare the rear tipping dumper for use &amp; operate machinery safely and efficiently ➢ Environmental considerations ➢ Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation ➢ Carry out all end of shift and shut down procedures<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Assessment</h2>Assessment will be to NPORS standards consisting of a theory test and practical test.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Certification</h2>NPORS Traditional card &ndash; With the traditional card there is no requirements to complete an NVQ, a five year card is issued and after five years reassessment is required.NPORS CSCS &ndash; To ensure that the operator is able to receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant.

Who Should Attend
This course is aimed at candidates that require the knowledge and practical skills operate Rear Tipping Dumpers to transport and discharge loads. This course can be completed by both novice and experienced candidates. We also offer refresher tests.
Novice course- 4 Days
Experienced worker tests- 1 day theory and practical assessment
Course information
Category N205

It is envisaged that by the end of this course of training the learner will be able to answer questions on and perform the following:
➢ Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operator
➢ Have a working knowledge of the manufacturer’s handbook for the particular machine to be used
➢ Be able to locate and identify the major components of the machine and explain their functions
➢ Be able to locate and identify key controls and explain their functions
➢ Conduct all pre-operational checks in accordance with manufacturer’s and legislative
requirements
➢ Identify and maintain PPE appropriate for rear tipping dumper use
➢ Conduct all necessary safety checks at the work area
➢ Prepare the rear tipping dumper for use & operate machinery safely and efficiently
➢ Environmental considerations
➢ Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation
➢ Carry out all end of shift and shut down procedures
Assessment
Assessment will be to NPORS standards consisting of a theory test and practical test.
Certification
NPORS Traditional card – With the traditional card there is no requirements to complete an NVQ, a five year card is issued and after five years reassessment is required.
NPORS CSCS – To ensure that the operator is able to receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant.

NPORS Rear Tipping Dumper (N205)

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Who Should Attend</h2>This course is aimed at candidates that require the knowledge and practical skills operate skid steer loads for various tasks. This course will give in depth knowledge around regulations and safe working practices and it will enable the candidate to carry out all works safely and efficiently. This course can be completed by both novice and experienced candidates. We also offer refresher tests.Novice course- 3 DaysExperienced worker tests- 1 day theory and practical assessment<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Course information</h2>Category N212 Skid-steer LoaderIt is envisaged that by the end of this course of training the learner will be able to answer questions on and perform the following: ➢ Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operator ➢ Have a working knowledge of the manufacturer&rsquo;s handbook for the particular machine to be used ➢ Be able to locate and identify the major components of the machine and explain their functions ➢ Be able to locate and identify key controls and explain their functions ➢ Conduct all pre-operational checks in accordance with manufacturer&rsquo;s and legislative requirements ➢ Identify and maintain PPE appropriate for skid steer loader use ➢ Conduct all necessary safety checks at the work area ➢ Prepare the skid steer loader for use, operate machinery safely and efficiently ➢ Environmental considerations ➢ Storage and transport of implements and attachments ➢ Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation ➢ Carry out all end of shift and shut down procedures<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Assessment</h2>Assessment will be to NPORS standards consisting of a theory test and practical test.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Certification</h2>NPORS Traditional card &ndash; With the traditional card there is no requirements to complete an NVQ, a five year card is issued and after five years reassessment is required.NPORS CSCS &ndash; To ensure that the operator is able to receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant.

Who Should Attend
This course is aimed at candidates that require the knowledge and practical skills operate skid steer loads for various tasks. This course will give in depth knowledge around regulations and safe working practices and it will enable the candidate to carry out all works safely and efficiently. This course can be completed by both novice and experienced candidates. We also offer refresher tests.
Novice course- 3 Days
Experienced worker tests- 1 day theory and practical assessment
Course information
Category N212 Skid-steer Loader
It is envisaged that by the end of this course of training the learner will be able to answer questions on and perform the following:
➢ Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operator
➢ Have a working knowledge of the manufacturer’s handbook for the particular machine to be used
➢ Be able to locate and identify the major components of the machine and explain their functions
➢ Be able to locate and identify key controls and explain their functions
➢ Conduct all pre-operational checks in accordance with manufacturer’s and legislative
requirements
➢ Identify and maintain PPE appropriate for skid steer loader use
➢ Conduct all necessary safety checks at the work area
➢ Prepare the skid steer loader for use, operate machinery safely and efficiently
➢ Environmental considerations
➢ Storage and transport of implements and attachments
➢ Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation
➢ Carry out all end of shift and shut down procedures
Assessment
Assessment will be to NPORS standards consisting of a theory test and practical test.
Certification
NPORS Traditional card – With the traditional card there is no requirements to complete an NVQ, a five year card is issued and after five years reassessment is required.
NPORS CSCS – To ensure that the operator is able to receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant.

NPORS Skidsteer Loader (N212)

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Who Should Attend</h2>This course is aimed at candidates that require the knowledge and practical skills to work around piling rigs, using ancillary equipment and placing positioning piling rigs to from piles. This course can be completed by both novice and experienced candidates. We also offer refresher tests.Novice course- 5 daysExperienced worker tests- 1 day theory and practical assessment<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Course information</h2>Category N022 Piling Rig AttendantIt is envisaged that by the end of this course of training the learner will be able to answer questions on and perform the following: ➢ Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as a piling rig attendant ➢ Have a working knowledge of the piling rig to be attended ➢ Be able to locate and identify the major components of the piling rig and explain their functions ➢ Be able to locate and identify ancillary equipment and explain their functions ➢ Assist in conducting pre-operational checks in accordance with manufacturer&rsquo;s and legislative requirements ➢ Conduct safety checks of the work area and agree hand signals and verbal commands ➢ Identify and maintain PPE appropriate for piling rig attendant ➢ Assist in rigging-up and prepare ancillary equipment for piling operations ➢ Guide and position rig on to the piling position and start piling process. ➢ Environmental considerations ➢ Assist in de-rigging and end of shift and shut down procedures ➢ Demonstrate knowledge and understanding of assisting in the loading and unloading procedures for piling rig transportation<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Assessment</h2>Assessment will be to NPORS standards consisting of a theory test and practical test.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Certification</h2>NPORS Traditional card &ndash; With the traditional card there is no requirements to complete an NVQ, a five year card is issued and after five years reassessment is required.NPORS CSCS &ndash; To ensure that the operator is able to receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant.

Who Should Attend
This course is aimed at candidates that require the knowledge and practical skills to work around piling rigs, using ancillary equipment and placing positioning piling rigs to from piles. This course can be completed by both novice and experienced candidates. We also offer refresher tests.
Novice course- 5 days
Experienced worker tests- 1 day theory and practical assessment
Course information
Category N022 Piling Rig Attendant
It is envisaged that by the end of this course of training the learner will be able to answer questions on and perform the following:
➢ Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as a piling rig attendant
➢ Have a working knowledge of the piling rig to be attended
➢ Be able to locate and identify the major components of the piling rig and explain their
functions
➢ Be able to locate and identify ancillary equipment and explain their functions
➢ Assist in conducting pre-operational checks in accordance with manufacturer’s and legislative requirements
➢ Conduct safety checks of the work area and agree hand signals and verbal commands
➢ Identify and maintain PPE appropriate for piling rig attendant
➢ Assist in rigging-up and prepare ancillary equipment for piling operations
➢ Guide and position rig on to the piling position and start piling process.
➢ Environmental considerations
➢ Assist in de-rigging and end of shift and shut down procedures
➢ Demonstrate knowledge and understanding of assisting in the loading and unloading procedures for piling rig transportation
Assessment
Assessment will be to NPORS standards consisting of a theory test and practical test.
Certification
NPORS Traditional card – With the traditional card there is no requirements to complete an NVQ, a five year card is issued and after five years reassessment is required.
NPORS CSCS – To ensure that the operator is able to receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant.

NPORS Piling Rig Attendant (N022)

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Who Should Attend</h2>This course is aimed at candidates who are already qualified to operate telescopic handlers and require knowledge and practical skills to transport suspended loads safely and correctly.&nbsp;This course can be completed by both novice and experienced candidates. We also offer refresher tests.Novice course- 2 daysExperienced worker tests- 1 day theory and practical assessment<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Course information</h2>Category N138 Telescopic Handler Suspended LoadsIt is envisaged that by the end of this course of training the learner will be able to answer questions on and perform the following: ➢ Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operator ➢ Be able to conform to manufacturers requirements as per technical data, conform to relevant regulations and legislation ➢ Be able to locate, identify and explain safe working loads, lifting capacity chart and explain how the manufacturer may reduce the lifting capacity when moving a suspended load, different lifting configurations and working ranges ➢ Identify and explain different lifting procedures, explain what task could fall into each category ➢ Identify and explain centres of gravity and calculate estimated weights of loads ➢ Identify any overhead / proximity hazards ➢ Be able to agree the signal codes / hand signals, direction of movement, safe working and safe landing placement zone with the slinger / signaller ➢ Ensure telescopic handler is in a safe condition and attachments fitted correctly ➢ Checked load integrity and security ➢ Be able to lift and move a load to a designated position in a safe and controlled manner, ensuring minimum uncontrolled movement ➢ Environmental considerations ➢ Carry out all out of service and securing procedures<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Assessment</h2>Assessment will be to NPORS standards consisting of a theory test and practical test.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Certification</h2>NPORS Traditional card &ndash; With the traditional card there is no requirements to complete an NVQ, a five year card is issued and after five years reassessment is required.NPORS CSCS &ndash; To ensure that the operator is able to receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant.

Who Should Attend
This course is aimed at candidates who are already qualified to operate telescopic handlers and require knowledge and practical skills to transport suspended loads safely and correctly.
 This course can be completed by both novice and experienced candidates. We also offer refresher tests.
Novice course- 2 days
Experienced worker tests- 1 day theory and practical assessment
Course information
Category N138 Telescopic Handler Suspended Loads
It is envisaged that by the end of this course of training the learner will be able to answer questions on and perform the following:
➢ Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operator
➢ Be able to conform to manufacturers requirements as per technical data, conform to relevant regulations and legislation
➢ Be able to locate, identify and explain safe working loads, lifting capacity chart and explain how the manufacturer may reduce the lifting capacity when moving a suspended load, different lifting configurations and working ranges
➢ Identify and explain different lifting procedures, explain what task could fall into each category
➢ Identify and explain centres of gravity and calculate estimated weights of loads
➢ Identify any overhead / proximity hazards
➢ Be able to agree the signal codes / hand signals, direction of movement, safe working and safe landing placement zone with the slinger / signaller
➢ Ensure telescopic handler is in a safe condition and attachments fitted correctly
➢ Checked load integrity and security
➢ Be able to lift and move a load to a designated position in a safe and controlled manner, ensuring minimum uncontrolled movement
➢ Environmental considerations
➢ Carry out all out of service and securing procedures
Assessment
Assessment will be to NPORS standards consisting of a theory test and practical test.
Certification
NPORS Traditional card – With the traditional card there is no requirements to complete an NVQ, a five year card is issued and after five years reassessment is required.
NPORS CSCS – To ensure that the operator is able to receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant.

NPORS Telescopic Handler Suspended Loads (N138)

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Who Should Attend</h2>This course is aimed at candidates that require the knowledge and practical skills operate micro 360 excavator to excavate and load materials. This course can be completed by both novice and experienced candidates. We also offer refresher tests.Novice course- 10 DaysExperienced worker tests- 1 day theory and practical assessment<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Course information</h2>Category Excavator Micro (Up to 1 Tonne)It is envisaged that by the end of this course of training the trainee operator will be able to answer questions on and perform the following: ➢ Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as a plant operator ➢ Have a working knowledge of the manufacturer&rsquo;s handbook for the particular machine to be used ➢ Be able to locate and identify the major components of the machine and explain their functions ➢ Be able to locate and identify steering, driving and braking controls and explain their functions ➢ Identify and maintain PPE appropriate for micro excavator use ➢ Conduct all pre-operational checks in accordance with manufacturer&rsquo;s and legislative requirements ➢ Safely mount and dismount the machine ➢ Start and stop the engine and safely move the machine off and stop it safely ➢ Configure the machine for travel and manoeuvre it safely across varying terrain in open and confined areas ➢ Conduct all necessary safety checks at the work area ➢ Manoeuvre the machine to the work area and correctly configure in readiness to carry out excavating tasks ➢ Carry out excavating tasks ➢ Load material onto transporting vehicles or into containers ➢ Reinstate excavation, grade and level ground ➢ Fit and remove attachments ➢ Carry out all end of shift and shut down procedures<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Assessment</h2>Assessment will be to NPORS standards consisting of a theory test and practical test.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Certification</h2>NPORS Traditional card &ndash; With the traditional card there is no requirements to complete an NVQ, a five year card is issued and after five years reassessment is required.NPORS CSCS &ndash; To ensure that the operator is able to receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant.

Who Should Attend
This course is aimed at candidates that require the knowledge and practical skills operate micro 360 excavator to excavate and load materials. This course can be completed by both novice and experienced candidates. We also offer refresher tests.
Novice course- 10 Days
Experienced worker tests- 1 day theory and practical assessment
Course information
Category Excavator Micro (Up to 1 Tonne)
It is envisaged that by the end of this course of training the trainee operator will be able to answer questions on and perform the following:
➢ Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as a plant operator
➢ Have a working knowledge of the manufacturer’s handbook for the particular machine to be used
➢ Be able to locate and identify the major components of the machine and explain their functions
➢ Be able to locate and identify steering, driving and braking controls and explain their functions
➢ Identify and maintain PPE appropriate for micro excavator use
➢ Conduct all pre-operational checks in accordance with manufacturer’s and legislative requirements
➢ Safely mount and dismount the machine
➢ Start and stop the engine and safely move the machine off and stop it safely
➢ Configure the machine for travel and manoeuvre it safely across varying terrain in open and confined areas
➢ Conduct all necessary safety checks at the work area
➢ Manoeuvre the machine to the work area and correctly configure in readiness to carry out
excavating tasks
➢ Carry out excavating tasks
➢ Load material onto transporting vehicles or into containers
➢ Reinstate excavation, grade and level ground
➢ Fit and remove attachments
➢ Carry out all end of shift and shut down procedures
Assessment
Assessment will be to NPORS standards consisting of a theory test and practical test.
Certification
NPORS Traditional card – With the traditional card there is no requirements to complete an NVQ, a five year card is issued and after five years reassessment is required.
NPORS CSCS – To ensure that the operator is able to receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant.

NPORS Excavator Micro (up to 1 Tonne) (N016)

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Who Should Attend</h2>This course is aimed at candidates that require the knowledge and practical skills to use suction excavators to excavate ground where utilities services are located. This course can be completed by both novice and experienced candidates. We also offer refresher tests.Novice course- 5 daysExperienced worker tests- 1 day theory and practical assessment<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Course information</h2>Category N021 Suction ExcavatorIt is envisaged that by the end of this course of training the trainee operator will be able to answer questions on and perform the following: ➢ Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as a suction excavator operator ➢ Have a working knowledge of the manufacturer&rsquo;s handbook for the particular suction excavator to be used ➢ Be able to locate and identify the major components of the machine and explain their functions ➢ Conduct all pre-operational checks in accordance with manufacturer&rsquo;s and legislative requirements ➢ Identify and maintain PPE appropriate for suction excavator use ➢ Explain the different types of suction excavators their advantages and disadvantages when excavating material ➢ Safely mount and dismount the machine ➢ Start and stop the engine, compressor and suction hoses safely and efficiently ➢ Be able to demonstrate how to safely and efficiently use the remote control ➢ Configure the machine for travel and manoeuvre it safely to the work position in open and confined areas ➢ Conduct all necessary safety checks at the work area ➢ Manoeuvre the machine to the work area and correctly configure in readiness to carry out excavating tasks ➢ Demonstrate an emergency stop explaining all relevant safety precautions ➢ Carry out excavating tasks ➢ Fit and remove different attachments ➢ Explain and demonstrate how to deposit material from the suction excavator safely and efficiently ➢ Environmental considerations ➢ Carry out all end of shift and shut down procedures<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Assessment</h2>Assessment will be to NPORS standards consisting of a theory test and practical test.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Certification</h2>NPORS Traditional card &ndash; With the traditional card there is no requirements to complete an NVQ, a five year card is issued and after five years reassessment is required.NPORS CSCS &ndash; To ensure that the operator is able to receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant.

Who Should Attend
This course is aimed at candidates that require the knowledge and practical skills to use suction excavators to excavate ground where utilities services are located. This course can be completed by both novice and experienced candidates. We also offer refresher tests.
Novice course- 5 days
Experienced worker tests- 1 day theory and practical assessment
Course information
Category N021 Suction Excavator
It is envisaged that by the end of this course of training the trainee operator will be able to answer questions on and perform the following:
➢ Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as a suction excavator operator
➢ Have a working knowledge of the manufacturer’s handbook for the particular suction excavator to be used
➢ Be able to locate and identify the major components of the machine and explain their functions
➢ Conduct all pre-operational checks in accordance with manufacturer’s and legislative requirements
➢ Identify and maintain PPE appropriate for suction excavator use
➢ Explain the different types of suction excavators their advantages and disadvantages when excavating material
➢ Safely mount and dismount the machine
➢ Start and stop the engine, compressor and suction hoses safely and efficiently
➢ Be able to demonstrate how to safely and efficiently use the remote control
➢ Configure the machine for travel and manoeuvre it safely to the work position in open and confined areas
➢ Conduct all necessary safety checks at the work area
➢ Manoeuvre the machine to the work area and correctly configure in readiness to carry out
excavating tasks
➢ Demonstrate an emergency stop explaining all relevant safety precautions
➢ Carry out excavating tasks
➢ Fit and remove different attachments
➢ Explain and demonstrate how to deposit material from the suction excavator safely and efficiently
➢ Environmental considerations
➢ Carry out all end of shift and shut down procedures
Assessment
Assessment will be to NPORS standards consisting of a theory test and practical test.
Certification
NPORS Traditional card – With the traditional card there is no requirements to complete an NVQ, a five year card is issued and after five years reassessment is required.
NPORS CSCS – To ensure that the operator is able to receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant.

NPORS Suction Excavator (N021)

Chelmsford

Stratford

This five-day course is a must for anyone who is considering or already working in a role with site manager responsibilities. This course covers all relevant legislation affecting safe working in the building, construction, and civil engineering industries.
It is endorsed by Build UK as the standard training for all construction managers.
Aims
To give a clear understanding of health, safety, welfare, and environmental legislation that affects your management role. It highlights the need for risk assessment in the workplace, the implementation of the necessary control measures and adequate communication to sustain a health and safety culture within the workforce.
Course Content
To give a clear understanding of health, safety, welfare, and environmental legislation that affects your management role. It highlights the need for risk assessment in the workplace, the implementation of the necessary control measures and adequate communication to sustain a health and safety culture within the workforce.
Course Content
• Health, safety, welfare and environmental legislation affecting your daily work
• New guidance and industry best practice
• Duties and responsibilities with regards to health, safety, welfare, and the environment
• Safe working
Prerequisites
This course is for you if you’re considering, or already have management responsibilities for planning, organising, monitoring, controlling and administering groups of staff e.g. site manager.
Assessment
At the end of this course, all delegates will have a clear understanding of controlling health and safety on site from a manager’s role.
Certificate
The certification for this course is valid for 5 years and is endorsed by Build UK as a standard training for all site managers.
To remain certified in this area, you will need to take a refresher course before the expiry date on your certificate, otherwise the full course will need to be retaken.
Instructions
Please note all online Site Management Safety Training Scheme courses with the venue “Online” will be delivered by a tutor over a video call.
This training will be delivered and assessed in English language; therefore, a good standard is required to complete the course.
Further attendee information will be sent in a separate email, please check your inbox.

SMC Safety Solutions

Site Management Safety Training Scheme (SMSTS) 5 day course

General Admission

Our Site Management Safety Training Scheme (SMSTS) refresher training courses, available both online and in-person, are designed for managers and individuals in positions of authority who completed their original SMSTS training program less than three years ago.

Aims
Participants will undertake a concise yet equally engaging training program covering all essential aspects of enforcing health and safety codes of practice at construction sites. Topics include in-depth discussions on risk assessments and effective methods for monitoring and managing industry-specific hazards.
Instructions
For online courses labeled “Remote Learning,” a tutor will deliver the training via video call.
All SMSTS courses are delivered and assessed in English. Participants must have a good command of the language to successfully complete the program.
Additional attendee information will be provided via email. Please ensure you check your inbox.


Site Management Safety Training Scheme (SMSTS) Refresher

A taster course on the theory element of Phlebotomy. A follow on Introduction to Phlebotomy course with full training is also available.<hr fr-original-style="" style="border-color: var(--border-muted); border-style: solid; clear: both; break-after: page; user-select: none; box-sizing: border-box;">GPT001-S GETTING STARTED IN PHLEBOTOMYCertified with the CPD Certification ServicePrecursor to our Introduction to Phlebotomy Course &amp; Advanced Phlebotomy CourseA taster course on the theory element of PhlebotomyDownlod a certificate on completion of your online courseOpen to all candidates and assumes no previous experience of taking blood<hr fr-original-style="" style="border-color: var(--border-muted); border-style: solid; clear: both; break-after: page; user-select: none; box-sizing: border-box;">About this courseOnline - Complete this eLearning course online in the comfort of your home or work. Allow approx. 2.5 hours to complete.8 weeks - Stop and start your course when it suits you. You have up to 8 weeks to complete (extendable on request)Validity - no expiry dateCPD Accredited (2 CPD points)WHO compliant<hr fr-original-style="" style="border-color: var(--border-muted); border-style: solid; clear: both; break-after: page; user-select: none; box-sizing: border-box;">Learning Objectives<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">To have an understanding of the roles within healthcare environments relating to phlebotomy</li><li fr-original-style="" style="box-sizing: border-box;">To have a good understanding of patient confidentiality and GDPR</li><li fr-original-style="" style="box-sizing: border-box;">To understand health and safety practices around bloodborne pathogens and work practice controls</li><li fr-original-style="" style="box-sizing: border-box;">An overview of the integumentary system and cardiovascular system</li><li fr-original-style="" style="box-sizing: border-box;">A detailed understanding of the composition of blood</li><li fr-original-style="" style="box-sizing: border-box;">A detailed understanding of one blood collection system (vacutainer)</li><li fr-original-style="" style="box-sizing: border-box;">Understand how to handle and assemble the equipment</li><li fr-original-style="" style="box-sizing: border-box;">An overview on pre-venipuncture procedures,the venepuncture and standard precautions</li></ul><hr fr-original-style="" style="border-color: var(--border-muted); border-style: solid; clear: both; break-after: page; user-select: none; box-sizing: border-box;">After the courseA follow on Introduction to Phlebotomy course that provides full training is available.<hr fr-original-style="" style="border-color: var(--border-muted); border-style: solid; clear: both; break-after: page; user-select: none; box-sizing: border-box;">Tags<ul fr-original-style="" style="box-sizing: border-box;"><li id="isPasted" fr-original-style="" style="box-sizing: border-box;">Online Events</li><li fr-original-style="" style="box-sizing: border-box;">Things To Do Online</li><li fr-original-style="" style="box-sizing: border-box;">Online Classes</li><li fr-original-style="" style="box-sizing: border-box;">Online Business Classes</li><li fr-original-style="" style="box-sizing: border-box;">#career</li><li fr-original-style="" style="box-sizing: border-box;">#training</li><li fr-original-style="" style="box-sizing: border-box;">#nursing</li><li fr-original-style="" style="box-sizing: border-box;">#phlebotomy</li><li fr-original-style="" style="box-sizing: border-box;">#elearning</li><li fr-original-style="" style="box-sizing: border-box;">#phlebotomist</li><li fr-original-style="" style="box-sizing: border-box;">#career_development</li><li fr-original-style="" style="box-sizing: border-box;">#training_course</li><li fr-original-style="" style="box-sizing: border-box;">#nursing_education</li><li fr-original-style="" style="box-sizing: border-box;">#phlebotomy_certification</li></ul>

A taster course on the theory element of Phlebotomy. A follow on Introduction to Phlebotomy course with full training is also available.



GPT001-S GETTING STARTED IN PHLEBOTOMY
Certified with the CPD Certification Service
Precursor to our Introduction to Phlebotomy Course & Advanced Phlebotomy Course
A taster course on the theory element of Phlebotomy
Downlod a certificate on completion of your online course
Open to all candidates and assumes no previous experience of taking blood



About this course
Online - Complete this eLearning course online in the comfort of your home or work. Allow approx. 2.5 hours to complete.
8 weeks - Stop and start your course when it suits you. You have up to 8 weeks to complete (extendable on request)
Validity - no expiry date
CPD Accredited (2 CPD points)
WHO compliant



Learning Objectives
To have an understanding of the roles within healthcare environments relating to phlebotomy
To have a good understanding of patient confidentiality and GDPR
To understand health and safety practices around bloodborne pathogens and work practice controls
An overview of the integumentary system and cardiovascular system
A detailed understanding of the composition of blood
A detailed understanding of one blood collection system (vacutainer)
Understand how to handle and assemble the equipment
An overview on pre-venipuncture procedures,the venepuncture and standard precautions



After the course
A follow on Introduction to Phlebotomy course that provides full training is available.



Tags
Online Events
Things To Do Online
Online Classes
Online Business Classes
#career
#training
#nursing
#phlebotomy
#elearning
#phlebotomist
#career_development
#training_course
#nursing_education
#phlebotomy_certification

Geopace Training

Allied Health

Healthcare Assistant

Allied Health Professions (AHP)

Nursing

Phlebotomist

Phlebotomy

Medicine & Nursing

Healthcare

A taster course on the theory element of Phlebotomy. A follow on Introduction to Phlebotomy course with full training is also available.

GETTING STARTED IN PHLEBOTOMY - E-LEARNING

This two-day course is a must for anyone who is considering or already working in a role with supervisory responsibilities. This course provides an understanding of health, safety, welfare, and environmental issues. It highlights legal responsibilities and the need to promote health and safety to supervise effectively.
It is endorsed by Build UK as the standard training for all supervisors working on Build UK sites.
Aims
To give a clear understanding of health, safety, welfare, and environmental legislation that affects your supervisory role. To help you fulfil your responsibilities regarding health, safety, welfare, and the environment. To help you implement new guidance and industry best practice affected by changes.
Course Content
• Health and safety law and how it will apply to supervisors.
• Your supervisory responsibilities in controlling site safety.
• Risk assessments and the need for method statements.
• Effective site inductions, toolbox talks and method statement briefings.
• Monitoring site activities effectively.
• Timely intervention when bad practice is identified.
Prerequisites
This course is for you if you are considering, or already have, supervisory responsibilities.
Assessment
At the end of this course, all delegates will have a clear understanding of controlling health and safety on site from a supervisor’s role.
Certificate
This certification for this course is valid for 5 years and is endorsed by Build UK as a standard training for all supervisors.
To remain certified in this area, you will need to take a refresher course before the expiry date on your certificate, otherwise the full course will need to be retaken.
Instructions
Please note all Site Supervisor Training courses with the venue “Remote Learning” will be delivered by a tutor over a video call.
This training will be delivered and assessed in English language; therefore, a good standard is required to complete the course.
Further attendee information will be sent in a separate email, please check your inbox

Site Supervisor Training Scheme (SSSTS) - 2 Day Course

Our CITB Online - Site Supervisors’ Safety Training Scheme (SSSTS) Refresher course is designed to give attendees a broad reminder of their responsibilities for health and safety on construction sites. Approved and endorsed by the United Kingdom Contractors Group, the SSSTS refresher course is a must for anyone who occupies a supervisory role on UKCG sites and wants to brush up on their knowledge of their legal responsibilities and the latest construction industry regulations.
The SSSTS Refresher course has been created to provide existing supervisors, or those who are just entering into a supervisory role, with in-depth knowledge of health and safety legislation and procedures. If a candidate completed a full SSSTS training course up to 5 years ago, they will be required to attend a refresher programme.
Prerequisites
SSSTS certificates are of course valid for up to 5 years, but due to the ever-changing nature of the industry, it is recommended that staff stay up to date by enrolling on a refresher course long before the qualification expires.
Instructions
Please note all Site Supervisor Training courses with the venue “Remote Learning” will be delivered by a tutor over a video call.
This training will be delivered and assessed in English language; therefore, a good standard is required to complete the course.
Further attendee information will be sent in a separate email, please check your inbox.

Site Supervisor Training Scheme (SSSTS) Refresher

This one-day course is a must for anyone considering or already working within a construction or civil engineering environment. This course provides Health and Safety awareness and is endorsed by Build UK as a standard training for all operatives on site.
Aims
To give a clear understanding of Regulations & Legislation that applies to construction work and is an ideal refresher for any operative that has previously completed training in Health & Safety.
Course Content
• Accident prevention
• Health & Safety law
• Control and management of the site and your how your role fits in with this
• Risk assessments and method statements
• Performing safely on site
• Reporting unsafe acts to prevent an accident
• Individual & employee responsibilities
• What to do if you think anyone’s Health and Safety is being put at risk
Assessment
At the end of this course, all delegates will have a clear understanding of the requirements of Health and Safety Legislation and their responsibilities to comply with them.
Candidates will need to complete a multiple-choice exam at the end of the CITB course. They will also need to engage and interact with others throughout the day.
Certificate
This certification for this course is valid for 5 years and is endorsed by Build UK as a standard training for all operatives. The certificate is part of CSCS Green Card requirements.
To remain certified in this area, you will need to retake the course before the expiry date or have completed an NVQ2 or higher in your skills set.
Instructions
Please note all Health & Safety Awareness courses with the venue “Remote Learning” will be delivered by a tutor over a video call.
This training will be delivered and assessed in English language; therefore, a good standard is required to complete the course.
Further attendee information will be sent in a separate email, please check your inbox.

Health & Safety Awareness (for Green CSCS)

This course is our most popular online training modules.&nbsp;Online E-learning training for health and safety training. This online training course fulfils most business requirements for providing some health and safety training in the workplace as set out in both the Health and safety Act and some of the Health and Safety Regulations.&nbsp;

This course is our most popular online training modules. 
Online E-learning training for health and safety training. This online training course fulfils most business requirements for providing some health and safety training in the workplace as set out in both the Health and safety Act and some of the Health and Safety Regulations. 

Comply Sense

Health & Wellbeing

Workplace Health & Safety

Health & Safety

Health & Safety At Work

Teaching & Training

Online E-learning training for health and safety training. This online training course fulfils most business requirements for providing some health and safety training in the workplace as set out in both the Health and safety Act and some of the Health and Safety Regulations. 

Slips, Trips and Falls 

Health and Safety: Working at Heights Level 1 (HSE Compliant)Uncover Health and Safety essentials in Working at Heights. Learn Health and Safety regulations, responsibilities, and equipment. Master Health and Safety in fall protection and incident reporting. Learning Outcomes:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Grasp Health and Safety in working at heights.</li><li fr-original-style="" style="box-sizing: border-box;">Comprehend Health and Safety regulations at heights.</li><li fr-original-style="" style="box-sizing: border-box;">Identify Health and Safety responsibilities at heights.</li><li fr-original-style="" style="box-sizing: border-box;">Demonstrate Health and Safety equipment usage.</li><li fr-original-style="" style="box-sizing: border-box;">Implement Health and Safety fall protection measures.</li></ul>More Benefits:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">LIFETIME access</li><li fr-original-style="" style="box-sizing: border-box;">Device Compatibility</li><li fr-original-style="" style="box-sizing: border-box;">Free Workplace Management Toolkit</li></ul>Health and Safety: Working at Heights Level 1 (HSE Compliant) Course Syllabus<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Understand Health and Safety in Working at Heights: Gain insights into the Health and Safety principles crucial for work at elevated levels.</li><li fr-original-style="" style="box-sizing: border-box;">Learn Health and Safety Regulations: Familiarise yourself with Health and Safety standards that govern working at heights.</li><li fr-original-style="" style="box-sizing: border-box;">Identify Health and Safety Responsibilities: Clarify the duties of employers and employees in ensuring Health and Safety during elevated work.</li><li fr-original-style="" style="box-sizing: border-box;">Master Health and Safety in Equipment Usage: Learn to select, inspect, and use equipment following Health and Safety guidelines.</li><li fr-original-style="" style="box-sizing: border-box;">Implement Health and Safety in Fall Protection: Acquire competencies in Health and Safety measures for fall protection and prevention.</li><li fr-original-style="" style="box-sizing: border-box;">Ensure Health and Safety in Incident Reporting: Understand Health and Safety protocols for immediate reporting and action in case of incidents at heights.</li></ul><div id="optional_extras" fr-original-style="" style="box-sizing: border-box;">

 </div>

Health and Safety: Working at Heights Level 1 (HSE Compliant)
Uncover Health and Safety essentials in Working at Heights. Learn Health and Safety regulations, responsibilities, and equipment. Master Health and Safety in fall protection and incident reporting.

Learning Outcomes:
Grasp Health and Safety in working at heights.
Comprehend Health and Safety regulations at heights.
Identify Health and Safety responsibilities at heights.
Demonstrate Health and Safety equipment usage.
Implement Health and Safety fall protection measures.
More Benefits:
LIFETIME access
Device Compatibility
Free Workplace Management Toolkit
Health and Safety: Working at Heights Level 1 (HSE Compliant) Course Syllabus
Understand Health and Safety in Working at Heights: Gain insights into the Health and Safety principles crucial for work at elevated levels.
Learn Health and Safety Regulations: Familiarise yourself with Health and Safety standards that govern working at heights.
Identify Health and Safety Responsibilities: Clarify the duties of employers and employees in ensuring Health and Safety during elevated work.
Master Health and Safety in Equipment Usage: Learn to select, inspect, and use equipment following Health and Safety guidelines.
Implement Health and Safety in Fall Protection: Acquire competencies in Health and Safety measures for fall protection and prevention.
Ensure Health and Safety in Incident Reporting: Understand Health and Safety protocols for immediate reporting and action in case of incidents at heights.

Empower UK Employment Training

Health & Safety Awareness

Mental Health At Work

Elevate your knowledge and skills in working at heights safely. Comply with regulations, implement risk assessments, and master the use of specialized equipment for fall protection. This course makes you adept at ensuring workplace safety in elevated environments.



Health and Safety: Working at Heights Level 1 (HSE Compliant)

Health &amp; Safety is a significant concern. Everyone has an essential role to play in reducing deaths and accidents at work. Failure to meet the requirements of Health and Safety regulations carries serious consequences so understanding these requirements is vital. 

This course is aimed at those starting out in the construction industry and provides an introduction to some of the key aspects of health and safety on and around construction sites. It can be taken along with the accredited exam to provide you with a recognised qualification that can form part of your CSCS card application.

Health & Safety is a significant concern. Everyone has an essential role to play in reducing deaths and accidents at work. Failure to meet the requirements of Health and Safety regulations carries serious consequences so understanding these requirements is vital. This course is aimed at those starting out in the construction industry and provides an introduction to some of the key aspects of health and safety on and around construction sites. It can be taken along with the accredited exam to provide you with a recognised qualification that can form part of your CSCS card application.

TNA Training & Safety Consultants

Level 1 Health and Safety in a Construction Environment (Leading to CSCS Green Card)

The Care Home Legionella Management Course is a meticulously designed 3 to 4-hours CPD programme tailored for care home staff, including facility managers, maintenance teams, and health and safety officers. This specialised course, delivered online for convenience and accessibility, equips participants with essential knowledge and practical skills to effectively manage legionella risks in care home environments.Participants will delve into comprehensive strategies for identifying, and controlling legionella hazards, ensuring adherence to the latest health and safety regulations. The course content aligns with the HSE ACOP L8 guidelines, offering a deep understanding of the necessary precautions and response protocols.Upon successful completion, attendees will receive a CPD Certificate that is compliant with industry standards, demonstrating their enhanced capability in managing legionella in care settings. The course also features interactive live sessions conducted by experienced professionals in the field, fostering an engaging and informative learning experience. This course is vital for maintaining a safe and compliant care home environment, prioritising the health and wellbeing of residents and staff.

The Care Home Legionella Management Course is a meticulously designed 3 to 4-hours CPD programme tailored for care home staff, including facility managers, maintenance teams, and health and safety officers. This specialised course, delivered online for convenience and accessibility, equips participants with essential knowledge and practical skills to effectively manage legionella risks in care home environments.
Participants will delve into comprehensive strategies for identifying, and controlling legionella hazards, ensuring adherence to the latest health and safety regulations. The course content aligns with the HSE ACOP L8 guidelines, offering a deep understanding of the necessary precautions and response protocols.
Upon successful completion, attendees will receive a CPD Certificate that is compliant with industry standards, demonstrating their enhanced capability in managing legionella in care settings. The course also features interactive live sessions conducted by experienced professionals in the field, fostering an engaging and informative learning experience. This course is vital for maintaining a safe and compliant care home environment, prioritising the health and wellbeing of residents and staff.

The First Principle Group Ltd

Legionella

Legionella Responsible Person

SEO Description: Elevate the standard of health and safety in your care home with our comprehensive 3-hour CPD Care Home Legionella Management Course. Specifically crafted for care home professionals, this online course empowers facility managers, maintenance teams, and health and safety officers with essential skills and knowledge to manage legionella risks effectively. Aligned with HSE ACOP L8 guidelines, the course offers in-depth learning about prevention, assessment, and control of legionella in care environments. Gain a CPD Certificate upon completion, showcasing your commitment to upholding the highest standards in care home safety. Join our expert-led live sessions for a practical and engaging learning experience, ensuring your care home remains a safe and compliant haven for residents and staff.

139 Courses in Glasgow

NPORS MEWP Boom (N108)

By Dynamic Training and Assessments Ltd

NPORS Road Roller (N214)

By Dynamic Training and Assessments Ltd

NPORS Forward Tipping Mini Dumper (N139)

By Dynamic Training and Assessments Ltd

NPORS Forward Tipping Dumper (N204)

By Dynamic Training and Assessments Ltd

NPORS Rear Tipping Dumper (N205)

By Dynamic Training and Assessments Ltd

NPORS Skidsteer Loader (N212)

By Dynamic Training and Assessments Ltd

NPORS Piling Rig Attendant (N022)

By Dynamic Training and Assessments Ltd

NPORS Telescopic Handler Suspended Loads (N138)

By Dynamic Training and Assessments Ltd

NPORS Excavator Micro (up to 1 Tonne) (N016)

By Dynamic Training and Assessments Ltd

NPORS Suction Excavator (N021)

By Dynamic Training and Assessments Ltd

Search By Location