Name: Commissioning of Electrical Equipment
Price: 3009 GBP
Availability: InStock

<div>
</div>
<section>
<div>
<h2><strong>About this training course</strong></h2>
<p>This 5 full-day course will cover all aspects of steam turbines including design and features of modern turbines, material, rotor balancing, features enhancing the reliability and maintainability of steam turbines, rotor dynamic analysis, Campbell, Goodman and SAFE diagrams, Blade failures: causes and solutions, maintenance and overhaul of steam turbines, and modeling of steam turbines. This course will also cover in detail all the components of these turbines, instrumentation, control systems, governing systems, and selection criteria.</p>
<p>The main focus of this course will be on the failure modes of steam turbine components, causes and solutions for component failure, maintenance, refurbishment and overhaul, rotor dynamic analysis of steam turbines, and computer simulation of steam turbine rotor dynamics. All possible failure modes of steam turbine components and the maintenance required to prevent them will be discussed in detail. Examples of rotor dynamic analysis, and stability criteria will be covered thoroughly.</p>
<p>This course will also provide up-dated information in respect to all the methods used to enhance the availability, reliability, and maintainability of steam turbines, increase the efficiency and longevity of steam turbines, and improve the rotor dynamic stability. This course will also cover in detail all steam turbine valves, jacking oil system, turning gear, turbine supervisory system, steam turbine monitoring technology, validation, and verification tests, performance testing of steam turbines and steam turbine codes especially ASME PTC6.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong><span>Steam Turbine Components and Systems:</span></strong><span> Learn about all components and systems of the various types of steam turbines such as: stationary and rotating blades, casings, rotor, seals, bearings, and lubrication systems</span></li>
<li><strong><span>Steam Turbine Failure Modes, Inspection, Diagnostic Testing, and Maintenance:</span></strong><span> Understand all the failure modes of steam turbine components, causes and solutions of steam turbine component failure, inspection, diagnostic testing, and all maintenance activities required for steam turbines to minimize their operating cost and maximize their efficiency, reliability, and longevity.</span></li>
<li><strong><span>Steam Turbine Instrumentation and Control Systems:</span></strong><span> Learn about the latest instrumentation, control systems, and governing systems of steam turbines</span></li>
<li><strong><span>Steam Turbine Reliability and Maintainability:</span></strong><span> Increase your knowledge about all the methods used to enhance the reliability and maintainability of steam turbines as well as the predictive and preventive maintenance required for steam turbines</span></li>
<li><strong><span>Steam Turbine Selection and Applications:</span></strong><span> Gain a detailed understanding of the selection considerations and applications of steam turbines in steam power plants, co-generation, combined-cycle plants, and drivers for compressors pumps, etc</span></li>
<li><strong><span>Steam Turbine Valves, Load-Frequency Control, Turbine Bypass Systems, and Steam Turbine Superheater Attemperators:</span></strong><span> Gain a thorough understanding of all steam turbine valves, load-frequency control, turbine bypass systems, and steam turbine superheater attemperators</span></li>
<li><strong><span>Jacking Oil System and Turning Gear:</span></strong><span> Learn about the turbine jacking oil system and turning gear operation</span></li>
<li><strong><span>Turbine Supervisory System:</span></strong><span> Gain a thorough understanding of the turbine supervisory system</span></li>
<li><strong><span>Steam Turbine Monitoring Technology, Validation, and Verification Tests for Power Plants:</span></strong><span> Learn about steam turbine monitoring technology, validation, and verification tests for power plants</span></li>
<li><strong><span>Steam Turbine Codes:</span></strong><span> Learn about steam turbine codes including ASME PTC6, DIN Test Code, and International Electrotechnical Commission (IEC) Doc 1, IEC Doc B</span></li>
<li><strong><span>Steam Turbine Rotor Dynamic Analysis, Campbell, Goodman, and SAFE Diagrams: </span></strong><span>Gain a thorough understanding of steam turbine rotor dynamic analysis, Campbell, Goodman, and SAFE diagrams</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li><span>Engineers of all disciplines</span></li>
<li><span>Managers</span></li>
<li><span>Technicians</span></li>
<li><span>Maintenance personnel</span></li>
<li><span>Other technical individuals</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</span></p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>Excerpt of the relevant chapters from the 'POWER GENERATION HANDBOOK' second edition published by McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>Excerpt of the relevant chapters from the 'POWER PLANT EQUIPMENT OPERATION AND MAINTENANCE GUIDE' published by</span> <span>McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>STEAM TURBINE TECHNOLOGY MANUAL (includes practical information about steam turbines maintenance, testing, and refurbishment - 500 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

EnergyEdge - Training for a Sustainable Energy Future

Renewable Energy

Oil & Gas

Steam Turbine Technology

Team of 10, pp

Normal Fee, pp

<div>
</div>
<section>
<div>
<h2><strong>About this Virtual Instructor Led Training (VILT)</strong></h2>
<p>This Virtual Instructor Led Training (VILT) course is designed with the aim of showing the degree of integration necessary in developing an offshore petroleum discovery, from field appraisal to development. The 5 half-day VILT course gives a comprehensive account of the methodology, processes and techniques utilised in developing an offshore oil or gas discovery.</p>
<p>Technically, integration of expected reservoir behavior, well planning and design, and facilities concepts and selection are exemplified through detailed case histories, group discussions and exercises. Commercial aspects related to overall project evaluation are also covered.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li>Course participants will obtain a comprehensive understanding of key aspects of offshore field development, from appraisal through to development planning and leading up to sanction.</li>
<li>The VILT course covers the three key elements: reservoirs, wells and facilities, and covers the integration of these with commercial aspects, and the required management aspects, including uncertainty and risk.</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>This VILT course is designed for <strong>project managers, field development and planning engineers, asset managers, petroleum engineers, reservoir engineers as well as field geoscientists and managers who have an interest in or are involved in field development feasibility and planning</strong>. In particular, this VILT course would be of interest to managers leading multidisciplinary and diverse functional teams.</p>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p>The VILT course will be delivered online in <strong>5 half-day sessions comprising 4 hours per day</strong>, with 2 breaks of 10 minutes per day.</p>
<p>Course Duration: 5 half-day sessions, 4 hours per session (20 hours in total).</p>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p><strong>Trainer 1:</strong></p>
<p>Your first expert course leader is a specialist in reservoir engineering, field development planning and petroleum management. Having worked for over 40 years in the petroleum industry, his most recent full-time position was Chief Operating Officer and Project Director for AED Oil and East Puffin (2007-09) for the Puffin offshore development, Timor Sea.</p>
<p>Prior to his academic career (2001-2006), commencing in 2001 as head of the new School of Petroleum Engineering and Management at the UA, he worked for 16 years for BHP Petroleum (now BHP Billiton), most recently as Chief Reservoir Engineer for their worldwide operations. Other positions with BHP Billiton involved mainly technical and project management, and general management positions, including member of the BHP Board. He was project manager (feasibility) for two FPSO projects, the Skua and Griffin area fields, offshore Australia. He was also the Technical Manager for the Dai Hung project, offshore Vietnam where first oil was achieved in just 18 months from sanction. Before that time, he worked for Shell International (8 years) in the Netherlands, including two years as Senior Lecturer Reservoir Engineering at Shell's training centre and in Australia, seconded to Woodside Energy, with a key role in Australia's largest capital project (at the time), the Northwest Shelf Gas development. He started his career in Calgary, Canada, first with Hudson's Bay Oil and Gas and subsequently with the US consulting company, Scientific Software Corporation.</p>
<p>He holds a BSc degree in Physics from the University of British Columbia and a MS degree in Nuclear Engineering from Stanford University. He has been an active member of the Society of Petroleum Engineers, including Director for the Asia-Pacific region (1996-98) and as a member of the Board. He was an SPE Distinguished Lecturer during 2001-02 and a PESA Distinguished Lecturer during 2002. He has lectured at many institutions and was a visiting professor at Stanford University in 2000. He has published over 50 papers on both technical and managerial topics.</p>
<p>His professional interests are in optimal planning and project management of offshore petroleum discoveries. His primary research interests are in the area of special core analysis and the development of predictive models for reservoir characterisation.</p>
<p><strong>Trainer 2:</strong></p>
<p>Your other course leader is currently an independent consultant and trainer after 37 years in the upstream petroleum industry. His previous roles included Chief Geologist for GALP Energy, Consultant/ Head of Exploration for Qatar Petroleum, Technical/ Asset Manager for SASOL, and various technical and technical management roles in BHP Billiton Petroleum and Chevron.</p>
<p>He managed/ executed many projects in diverse locations: West Grimes gas field development - California; Port Arguello heavy oil development - offshore California; exploration &amp; development projects - Nigeria; Tengiz field early development, Korolev appraisal - Kazakhstan; Nkossa field development, Moho/ Bilondo exploration - offshore Congo; PNG divestment, Bayu-Undan LNG development - Australia; Ohanet acquisition, appraisal &amp; development - Algeria; Pande development, Pande/ Temane gas plant expansion &amp; near field exploration - Mozambique; Pre-Khuff (HP/HT) exploration, multiple blocks &amp; operators - Qatar; Coral/ Mamba appraisal - Mozambique; Blocks 14/32 exploration &amp; development - Angola; exploration &amp; appraisal - onshore &amp; offshore Brazil.</p>
<p>He has an MSc in Geophysics from Stanford, an MBA from St. Mary's College of California, and a BSc in Geology (Honors) from Western Illinois University. He is a member of SEG, AAPG, SPE, PESGB, and PESA and is a Fellow of the Energy Institute (UK).</p>
<p>His professional interests centre around deploying this extensive and international experience base to add value to future projects via training and consultancy, and to provide the leadership needed to execute, deliver, and ensure profitability of new projects.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information about post training coaching support and fees applicable for this.</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Integrated Field Development Planning for Offshore Fields

<div fr-original-style="" style="box-sizing: border-box;">
</div>
<section fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<h2 fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">About this Training Course</strong></h2>
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">This is an advanced chemistry training course for power plant chemists and boiler engineers wishing to expand their knowledge and skills, and to become more effective in their day-to-day roles dealing with thermal power plant chemistry.</p>
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">This 5 full-day course will provide ample opportunity for robust technical discussion and expand on advanced concepts in thermal power plant cycle chemistry. It focuses only on the steam/water aspects of the thermal power cycle.</p>
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">This course is a MUST for all power plant chemists and boiler engineers. It is also beneficial for anyone involved in power plant operation and maintenance because it provides guidelines and rules for improving power plant performance and reliability.</p>
</div>
</section>
<section fr-original-style="" style="box-sizing: border-box;">
<div id="accordion" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">

Training Objectives 

</div>
<div id="collapseOne" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<ul fr-original-style="" style="box-sizing: border-box;">
<li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span fr-original-style="" style="box-sizing: border-box;">Gain a significant increase in understanding of cycle chemistry in steam power plants</span></strong><span fr-original-style="" style="box-sizing: border-box;"> and the inter-relationships between plant operation, cycle chemistry and potential failure modes due to corrosion and/or deposition throughout the cycle</span></li>
<li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span fr-original-style="" style="box-sizing: border-box;">Gain a thorough understanding of all causes of corrosion</span></strong><span fr-original-style="" style="box-sizing: border-box;"> in a steam power plant and all the methods used to reduce the corrosion rate in a steam power plant</span></li>
<li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span fr-original-style="" style="box-sizing: border-box;">Become better equipped to effectively manage the corrosion</span></strong><span fr-original-style="" style="box-sizing: border-box;"> and deposition risks in a thermal power plant</span></li>
<li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span fr-original-style="" style="box-sizing: border-box;">Learn how to reduce failure rate</span></strong><span fr-original-style="" style="box-sizing: border-box;"> in boilers and steam power plants and improve plant performance</span></li>
<li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span fr-original-style="" style="box-sizing: border-box;">Understand condensate polishing and treatment </span></strong><span fr-original-style="" style="box-sizing: border-box;">of condensate return to industrial boilers</span></li>
<li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span fr-original-style="" style="box-sizing: border-box;">Discover the causes of boiler water </span></strong><span fr-original-style="" style="box-sizing: border-box;">contamination and treatment programs</span></li>
<li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span fr-original-style="" style="box-sizing: border-box;">Learn about layup </span></strong><span fr-original-style="" style="box-sizing: border-box;">and offline corrosion protection</span></li>
<li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span fr-original-style="" style="box-sizing: border-box;">Understand water chemistry limits</span></strong><span fr-original-style="" style="box-sizing: border-box;"> to prevent steam contamination by carryover</span></li>
<li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span fr-original-style="" style="box-sizing: border-box;">Learn about boiler water chemistry guidelines</span></strong><span fr-original-style="" style="box-sizing: border-box;"> and control of steam chemistry</span></li>
<li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span fr-original-style="" style="box-sizing: border-box;">Understand high-purity</span></strong><span fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"> make-up</strong> treatment methods</span></li>
<li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span fr-original-style="" style="box-sizing: border-box;">Perform demineralizer</span></strong><span fr-original-style="" style="box-sizing: border-box;"> calculations</span></li>
<li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span fr-original-style="" style="box-sizing: border-box;">Perform system design</span></strong><span fr-original-style="" style="box-sizing: border-box;"> calculations</span></li>
<li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span fr-original-style="" style="box-sizing: border-box;">Gain a thorough understanding of mixed bed</span></strong><span fr-original-style="" style="box-sizing: border-box;"> polishing and reverse osmosis</span></li>
</ul>
</div>
</div>
</div>
<div fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">

Target Audience 

</div>
<div id="collapseTwo" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<ul fr-original-style="" style="box-sizing: border-box;">
<li fr-original-style="" style="box-sizing: border-box;"><span fr-original-style="" style="box-sizing: border-box;">Power Plant Chemists</span></li>
<li fr-original-style="" style="box-sizing: border-box;"><span fr-original-style="" style="box-sizing: border-box;">Boiler Engineers</span></li>
<li fr-original-style="" style="box-sizing: border-box;"><span fr-original-style="" style="box-sizing: border-box;">Engineers involved in the operation and maintenance of power plants</span></li>
<li fr-original-style="" style="box-sizing: border-box;"><span fr-original-style="" style="box-sizing: border-box;">Managers</span></li>
<li fr-original-style="" style="box-sizing: border-box;"><span fr-original-style="" style="box-sizing: border-box;">Technicians</span></li>
<li fr-original-style="" style="box-sizing: border-box;"><span fr-original-style="" style="box-sizing: border-box;">Maintenance personnel</span></li>
<li fr-original-style="" style="box-sizing: border-box;"><span fr-original-style="" style="box-sizing: border-box;">Other technical individuals (this seminar is suitable for individuals who do not have a background in chemical engineering)</span></li>
</ul>
</div>
</div>
</div>
<div fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">

Course Level 

</div>
<div id="collapsecl" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<ul fr-original-style="" style="box-sizing: border-box;">
<li fr-original-style="" style="box-sizing: border-box;">Advanced</li>
</ul>
</div>
</div>
</div>
<div fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">

Training Methods 

</div>
<div id="collapseThree" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span fr-original-style="" style="box-sizing: border-box;">Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</span></p>
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span fr-original-style="" style="box-sizing: border-box;">Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul fr-original-style="" style="box-sizing: border-box;">
<li fr-original-style="" style="box-sizing: border-box;"><span fr-original-style="" style="box-sizing: border-box;">&#39;POWER GENERATION HANDBOOK&#39; second edition, published by McGraw-Hill in 2012 in New York (800 pages)</span></li>
<li fr-original-style="" style="box-sizing: border-box;"><span fr-original-style="" style="box-sizing: border-box;">Water Chemistry for Thermal Power Plant Chemists and Boiler Engineers</span> <span fr-original-style="" style="box-sizing: border-box;">Manual (650 pages)</span></li>
</ul>
</div>
</div>
</div>
<div fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">

Trainer

</div>
<div id="collapseFive" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories.</p>
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment.</p>
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations.</p>
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as &#39;Excellent&#39; or &#39;Very Good&#39; by the delegates who attended his seminars and lectures.</p>
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul fr-original-style="" style="box-sizing: border-box;">
<li fr-original-style="" style="box-sizing: border-box;">Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li fr-original-style="" style="box-sizing: border-box;">Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li fr-original-style="" style="box-sizing: border-box;">Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li fr-original-style="" style="box-sizing: border-box;">Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li fr-original-style="" style="box-sizing: border-box;">Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Furthermore, he has received the following awards:</p>
<ul fr-original-style="" style="box-sizing: border-box;">
<li fr-original-style="" style="box-sizing: border-box;">The first &#39;Excellence in Teaching&#39; award offered by PowerEdge, Singapore, in December 2016</li>
<li fr-original-style="" style="box-sizing: border-box;">The first &#39;Excellence in Teaching&#39; award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li fr-original-style="" style="box-sizing: border-box;">The &#39;Excellence in Teaching Award&#39; in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li fr-original-style="" style="box-sizing: border-box;">Awarded graduation &#39;With Distinction&#39; from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Lastly, he was awarded his Bachelor of Engineering Degree &#39;with distinction&#39; from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">To further optimise your learning experience from our courses, we also offer individualized &#39;One to One&#39; coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br fr-original-style="" style="box-sizing: border-box;">
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">

Accreditions And Affliations

</div>
<div id="collapseSeven" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
               </div>
</div>
</div>
</div>
</section>

Water Chemistry for Thermal Power Station Plant Chemist & Boiler Engineers

<div>
</div>
<section>
<div>
<h2><strong>About this training course</strong></h2>
<p>This 5 full-day course provide a comprehensive understanding of modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, HART protocol, control valves, actuators, and smart technology. This course will focus on maximizing the efficiency, reliability, and longevity of these systems and equipment by providing an understanding of the characteristics, selection criteria, common problems and repair techniques, preventive and predictive maintenance.</p>
<p>This course is a MUST for anyone who is involved in the selection, applications, or maintenance of modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology because it covers how these systems and equipment operate, the latest maintenance techniques, and provides guidelines and rules that ensure their successful operation. In addition, this course will cover in detail the basic design, operating characteristics, specification, selection criteria, advanced fault detection techniques, critical components and all preventive and predictive maintenance methods in order to increase the reliability of these systems andequipment and reduce their operation and maintenance cost</p>
<p>This course will provide the following information for modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology:</p>
<ul>
<li>Basic Design</li>
<li>Specification</li>
<li>Selection Criteria</li>
<li>Sizing Calculations</li>
<li>Enclosures and Sealing Arrangements</li>
<li>Codes and Standards</li>
<li>Common Operational Problems</li>
<li>All Diagnostics, Troubleshooting, Testing, and Maintenance</li>
</ul>
<p>Practical applications of smart instrumentation, SCADA, and Distributed Control Systems, control valves, actuators, etc in the following industries will be discussed in detail:</p>
<ul>
<li>Chemical and petrochemical</li>
<li>Power generation</li>
<li>Pulp and paper</li>
<li>Aerospace</li>
<li>Water and sewage treatment</li>
<li>Electrical power grids</li>
<li>Environmental monitoring and control systems</li>
<li>Pharmaceutical plants</li>
</ul>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong><span>Equipment Operation: </span></strong><span>Gain a thorough understanding of the operating characteristics of modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
<li><strong><span>Equipment Diagnostics and Inspection:</span></strong><span> Learn in detail all the diagnostic techniques and inspections required of critical components of modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
<li><strong><span>Equipment Testing:</span></strong><span> Understand thoroughly all the tests required for the various types of modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
<li><strong><span>Equipment Maintenance and Troubleshooting: </span></strong><span>Determine all the maintenance and troubleshooting activities required to minimize the downtime and operating cost of modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
<li><strong><span>Equipment Repair and Refurbishment:</span></strong><span> Gain a detailed understanding of the various methods used to repair and refurbish modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
<li><strong><span>Efficiency, Reliability, and Longevity: </span></strong><span>Learn the various methods used to maximize the efficiency, reliability, and longevity of modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
<li><strong><span>Equipment Sizing:</span></strong><span> Gain a detailed understanding of all the calculations and sizing techniques used for modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
<li><strong><span>Design Features:</span></strong><span> Understand all the design features that improve the efficiency and reliability of modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
<li><strong><span>Equipment Selection:</span></strong><span> Learn how to select modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology by using the performance characteristics and selection criteria that you will learn in this course</span></li>
<li><span><strong>Equipment Enclosures and Sealing</strong> Methods </span><span>Learn about the various types of enclosures and sealing arrangements used for modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
<li><strong><span>Equipment Commissioning:</span></strong><span> Understand all the commissioning requirements for modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
<li><strong><span>Equipment Codes and Standards:</span></strong><span> Learn all the codes and standards applicable for modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
<li><strong><span>Equipment Causes and Modes of Failure:</span></strong><span> Understand the causes and modes of failure of modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
<li><strong><span>System Design: </span></strong><span>Learn all the requirements for designing different types of modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li><span>Engineers of all disciplines</span></li>
<li><span>Managers</span></li>
<li><span>Technicians</span></li>
<li><span>Maintenance personnel</span></li>
<li><span>Other technical individuals</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</span></p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>Industrial Instrumentation and Modern Control Systems Practical Manual (400 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Industrial Instrumentation and Modern Control Systems

<div>
</div>
<section>
<div>
<h2>About this training course</h2>
<p>This 5 full-day course will cover all aspects of gas turbines, co-generation and combined cycle power plants. It will cover in detail all the components of these types of power plants such as: compressors, gas and steam turbines, heat recovery steam generators, deaerators, condensers, lubricating systems, instrumentation, control systems, and economics.</p>
<p>The design, selection considerations, operation, maintenance, pay-back period, economics of co-generation plants and combined cycles, as well as, emission limits, reliability, monitoring and governing systems are also covered in detail. This course will also provide up-dated information in respect to all the significant improvements that have been made to co-generation and combined cycles power plants, during the last two decades.</p>
<p>The course will illustrate through sophisticated computer simulation how gas turbines, co-generation and combined cycle plants perform under steady-state and transient conditions. In addition, the participants will learn how to use the computer simulation program which provides the following benefits:</p>
<ol>
<li>Allow the operator to extend the gas turbine operating period by avoiding unnecessary outages and maintenance activities.</li>
<li>Determination of essential gas turbine maintenance activities to reduce the duration of outages.</li>
<li>Profit optimization of co-generation and combined cycle plants.</li>
<li>Minimization of the environmental emissions of co-generation and combined cycle plants.</li>
</ol>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong><span>Power Plant Computer simulation:</span></strong><span> Gain a thorough understanding of computer simulation of gas turbines, co-generation, and combined cycle plants.</span></li>
<li><strong><span>Power Plant Components and Systems: </span></strong><span>Learn about all components and subsystems of the various types of power plants such as gas turbines, co-generation and combined cycle plants</span></li>
<li><strong><span>Power Plants Economics: </span></strong><span>Examine the advantages, applications, performance and economics of power plants such as: gas turbines, co-generation, and combined cycle plants</span></li>
<li><strong><span>Power Plant Equipment: </span></strong><span>Learn about various power plant equipment including: compressors, turbines, governing systems, combustors, deaerators, feed water heaters, etc.</span></li>
<li><strong><span>Power Plant Maintenance:</span></strong><span> Learn all the maintenance activities required for power plants such as: gas turbines, co-generation plants and combined cycles to minimize their operating cost and maximize their efficiency, reliability, and longevity</span></li>
<li><strong><span>Power Plant Environmental Emissions:</span></strong><span> Learn about the monitoring and control of environmental emissions.</span></li>
<li><strong><span>Power Plant Instrumentation and Control Systems:</span></strong><span> Learn about the latest instrumentation and control systems of gas turbines, co-generation and combined cycles power plants</span></li>
<li><strong><span>Power Plant Reliability and Testing:</span></strong><span> Increase your knowledge of power plant predictive and preventive maintenance, reliability and testing.</span></li>
<li><strong><span>Power Plant Selection and Applications:</span></strong><span> Gain a detailed understanding of the selection considerations and applications of power plants such as: gas turbines, co-generation and combined-cycle power plants</span></li>
<li><strong><span>Power Plant Profitability:</span></strong><span> Learn about the reliability, life cycle cost, profitability, refurbishment, and life extension methods for gas turbines, co-generation and combined cycle power plants.</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li><span>Engineers of all disciplines</span></li>
<li><span>Managers</span></li>
<li><span>Technicians</span></li>
<li><span>Maintenance personnel</span></li>
<li><span>Other technical individuals</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</span></p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>'POWER GENERATION HANDBOOK' second edition, published by McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>Practical manual (500 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Gas Turbines, Co-Generation and Combined Cycle Power Plants

<div>
</div>
<section>
<div>
<h2><strong>About this Training</strong></h2>
<p>A variety of factors such as prices for crude oil and natural gas, liability exposure, and relations with host countries, present an opportunity for investors looking to acquire assets without taking on elements of exploration and market risk. Conversely, operators want to ensure that they are in the best position to monetise the disposal of interests in their portfolios.</p>
<p>The material in this course covers the range of considerations that occur in the sale and purchase of upstream oil and gas properties. They include structuring (asset sale, share transfer, merger, interest swaps, and farm-outs), process (tender, direct negotiation, due diligence, preliminary and final agreements, closing and post-closing adjustments) and how funding is structured (credit agreements and reserve base lending).</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>Upon completion of this course, participants will be able to:</p>
<ul>
<li>Plan and prepare for the sale or purchase of upstream oil and gas properties</li>
<li>Select and structure the type of transaction best suit to the position of the Buyer and Seller</li>
<li>Conduct and evaluate the commercial, operational, and legal aspects of due diligence</li>
<li>Negotiate and document the terms and conditions contained in sale and purchase agreements for oil and gas properties</li>
<li>Conduct post-closing adjustments in the sale and purchase of operating properties</li>
<li>Assist in the negotiation of credit arrangements to fund the purchase of oil and gas properties</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>This course has been specifically designed for commercial, operating, legal and financial professionals involved in the sale and purchase of upstream oil and gas properties whose roles include:</p>
<ul>
<li>Conducting tenders for the sale of exploration and operating interests</li>
<li>Performing due diligence reviews</li>
<li>Negotiating preliminary and definitive agreements</li>
<li>Arranging credit agreements and other types of funding</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your expert course leader is an international legal expert in petroleum law who is based in Scotland. He received the degrees of Juris Doctor from the University of Wyoming and LLM-Energy Law from the University of Utah. He has been listed in the Guide to the World's Leading Energy and Natural Resources Lawyers. In over 30 years of practice, he has been chief legal officer in petroleum companies, consultant to development banks and aid programmes, and law professor.</p>
<p>His private sector experience included positions as General Counsel of the Petroleum Corporation of New Zealand and Chief Legal Officer for Sinclair Oil Corporation in the United States. He has been a consultant to the Asian Development Bank, The World Bank and the European Investment Bank on petroleum sector policy, gas sales agreements, and production sharing contracts. This has included assignments in Cambodia, Bangladesh, India, Indonesia, Laos, Pakistan, Papua New Guinea, Philippines, and Vietnam.</p>
<p>Your expert course leader has been an adviser and trainer on negotiations for various petroleum companies including BP, BG Group, Gazprom, KazMunayGas, Perushaan Gas Negera, Pertamina, PETRONAS, Philippine National Oil Corporation, Total, Shell and Statoil. He was appointed by Economic Community of West African States (ECOWAS) as the lead negotiator on behalf of four West African governments for the West African Gas Pipeline Project.</p>
<p>His academic credentials include an appointment as Distinguished Visiting Professor for Oil &amp; Gas Law at the University of Wyoming. He is currently Honourary Professor for International Petroleum Law at the University of Dundee Centre for Energy, Petroleum &amp; Mineral Law and Policy. At CEPMLP, he has been the Course Director and principal instructor for seminars on Petroleum Industry Negotiations, Petroleum Service Contracts, Gas Industry Contracts, and Downstream Petroleum Law. He is the course author of International Comparative Petroleum Law. His publications include A Framework for Negotiating and Documenting International Petroleum Transactions and A Framework for Negotiating and Managing Production Sharing Contracts and Related Agreements. His academic work has been published in the Land and Water Law Review, Tulsa Law Journal and Journal of Comparative and International Law.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information about post training coaching support and fees applicable for this.</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Sale & Purchase of Oil & Gas Properties

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>This 5 full-day course provides detailed description of all combustion equipment and systems used in pulverized coal boilers and circulating fluidized bed (CFB) boilers including pulverized coal burning systems, coal feeder, pulverizer and classifier, pulverized coal burners, furnace and fans. This course provides also a comprehensive explanation of all boiler combustion control systems including pulverizer control system, combustion control, control of coal and air flow into the boiler, furnace pressure control, oxygen trim control, nitrogen oxides (NOx) and sulfur oxides (SOx) control, control of ammonia injection, flue gas dew point control, purge control, flame monitoring and tripping system as well as their tuning methods. All boiler control systems are covered as well in this course including drum level feedwater control, main steam and reheat steam temperature control, boiler limits and runback, sliding or variable pressure control, heat rate optimization with sliding pressure control, boiler-turbine coordinated control, etc.</p>
<p>The course provides also detailed explanation of Boiler NFPA 85 Code (Boiler and Combustion Systems Hazards Codes) and American National Standard Institute/Instrument Society of America Code (ANSI/ISA-77-44-01-2007 Code). The burner management systems (BMS) and examples of boiler permissive starting logic and protective tripping logic will be explained thoroughly. The various methods used to calculate the boiler efficiency are covered in detail in this course including the direct and indirect methods. All the factors which affect the efficiency and emissions of pulverized coal boiler and CFB boiler will be explained thoroughly.</p>
<p>The course covers also all the methods used to improve the efficiency of pulverized coal boilers and CFB boilers including improvement to their combustion efficiency and control systems performance.</p>
<p></p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong><span>Boiler Combustion Equipment and Systems:</span></strong><span> Gain an in-depth understanding of all boiler combustion equipment and systems including pulverized coal burning systems, coal feeder, pulverizer and classifier, pulverized coal burners, furnace and fans</span></li>
<li><strong><span>Boiler Combustion Control Systems:</span></strong><span> Gain a thorough understanding of all boiler combustion control systems for pulverized coal boilers, and CFB boilers including pulverizer control system, combustion control, control of coal and air flow into the boiler, furnace pressure control, oxygen trim control, nitrogen oxides (NOx) and sulfur oxides (SOx) control, control of ammonia injection, flue gas dew point control, purge control, flame monitoring and tripping system</span></li>
<li><strong><span>Boiler Conventional Control Systems:</span></strong><span> Gain an in-depth understanding of all boiler conventional control systems including drum level feedwater control, main steam and reheat steam temperature control, boiler limits and runback, sliding or variable pressure control, heat rate optimization with sliding pressure control, and boiler-turbine coordinated control</span></li>
<li><strong><span>Boiler NFPA 85 Code (Boiler and Combustion Systems Hazards Codes) and American National Standard Institute/Instrument Society of America Code (ANSI/ISA-77-44-01-2007 Code):</span></strong><span> Learn about NFPA 85 code and ANSI/ISA-77-44-01-2007 code</span></li>
<li><strong><span>Burner Management System and Boiler Permissive Starting Logic and Protective Tripping Logic:</span></strong><span> Gain an in-depth understanding of burner management system and boiler permissive starting logic and protective tripping logic</span></li>
<li><strong><span>Boiler Efficiency Calculations:</span><span> Learn how to calculate the boiler efficiency using the direct and indirect methods</span></strong></li>
<li><strong><span>Factors Affecting the Efficiency and Emissions of Boilers: </span></strong><span>Understand all the factors which affect the boiler efficiency and emissions</span></li>
<li><strong><span>Methods Used to Improve the Efficiency of Boilers:</span></strong><span> Learn about all the methods used to improve the efficiency of pulverized coal boilers, and CFB boilers including improvement to their combustion efficiency and control systems performance</span></li>
<li><strong><span>Boiler Instrument and Piping Diagrams:</span></strong><span> Gain an in-depth understanding of all boiler instrument and piping diagrams</span></li>
<li><strong><span>CFB and Pulverized Coal Boilers Equipment and Systems:</span></strong><span> Learn about various types of equipment and systems used in CFB and pulverized coal boilers including economizers, steam drum, superheaters, air preheaters, ammonia injection systems, etc.</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li><span>Engineers of all disciplines</span></li>
<li><span>Managers</span></li>
<li><span>Technicians</span></li>
<li><span>Maintenance personnel</span></li>
<li><span>Other technical individuals</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</span></p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>Excerpt of the relevant chapters from the 'POWER GENERATION HANDBOOK' second edition published by McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>Excerpt of the relevant chapters from the 'POWER PLANT EQUIPMENT OPERATION AND MAINTENANCE GUIDE' published by</span> <span>McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>COMBUSTION ENGINEERING FOR COAL FIRED POWER PLANTS MANUAL (includes practical information about combustion engineering for coal fired power plants - 550 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Combustion Engineering for Coal Fired Power Plants

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>This course will provide a comprehensive, foundational content for a wide range of topics in power system operation and control. With the growing importance of grid integration of renewables and the interest in smart grid technologies, it is more important than ever to understand the fundamentals that underpin electrical power systems.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong>Basic Terminology and Concepts of Electrical Systems:</strong> Gain an understanding of the basic terminology and concepts of electrical systems and the structure of a power system</li>
<li><strong>Transmission Line Parameters:</strong> Learn in detail all the transmission line parameters including line resistance, line inductance, transposition of transmission lines, and capacitance of transmission lines</li>
<li><strong>Insulators:</strong> Understand thoroughly all the various types of insulators, pin type insulators, suspension type or disc insulators, strain insulators, and testing of insulators</li>
<li><strong>High-Voltage Direct Current Transmission:</strong> Determine the advantages and disadvantages of high voltage direct current transmission, and gain an understanding of all the features of high-voltage direct current transmission</li>
<li><strong>Substations and Neutral Grounding:</strong> Gain a detailed understanding of all substation equipment, factors governing the layout of substations, station transformers, elements to be earthed in a substation, power system earthing, earthing transformers, bus bar arrangements and gas-insulated substations</li>
<li><strong>Distribution System:</strong> Learn about the effects of voltage on the conductor volume, distributor fed from one end, distributors fed from both ends at the same voltage, distributors fed from both ends at different voltages, and alternating current distribution</li>
<li><strong>Circuit Breakers:</strong> Learn about the classification of circuit breakers, plain-break oil circuit breakers, air break circuit breaker, air blast circuit breakers, vacuum circuit breakers, SF6 circuit breakers, rating and testing of circuit breakers</li>
<li><strong>Relaying and Protection:</strong> Learn all the requirements of relaying, zones of protection, primary and backup protection, classification of relays, electromagnetic relays, induction relays, feeder protection, phase fault protection, reactance relay, static overcurrent relay, differential protection, transformer protection, Buchholz relays, alternator protection restricted earth fault protection, rotor earth fault protection, and negative-sequence protection</li>
<li><strong>Economic Operation of Power Systems:</strong> Gain an understanding of steam power plants, heat rate characteristics and characteristics of hydro plants</li>
<li><strong>Load Frequency Control:</strong> Learn about speed governing mechanism, speed governor, steady state speed regulations and adjustment of governor characteristics</li>
<li><strong>Voltage and Reactive Power Control:</strong> Gain an understanding of impedance and reactive power, system voltage and reactive power, voltage regulation and power transfer</li>
<li><strong>Renewable Energy Sources:</strong> Learn about solar power, wind power, geothermal energy, biomass and tidal power</li>
<li><strong>Restructuring of Electrical Power Systems:</strong> Gain an understanding of smart grids, smart grid components, smart grid benefits, and open smart grid protocol</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li>Engineers of all disciplines</li>
<li>Managers</li>
<li>Technicians</li>
<li>Maintenance personnel</li>
<li>Other technical individuals</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories.</p>
<p>While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment.</p>
<p>Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations.</p>
<p>In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures.</p>
<p>He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Introduction to Power Systems

<div>
</div>
<section>
<div>
<h2><strong>About this training course</strong></h2>
<p>This 5 full-day course will provide a comprehensive understanding of the design of circulating fluidized bed (CFB) boilers. The design of all CFB boiler components and equipment including furnace, cyclones, economizers, superheaters, reheaters, loop seals, expansion joints, refractory, and L-valves will be covered in detail. All potential operating problems and major operating problems, corrective actions and maintenance required for CFB boilers will be covered thoroughly.</p>
<p>This course will focus on designing CFB boilers that have the highest efficiency, and maximum longevity and capacity factor. All the common problems encountered in CFB Boilers will be discussed in detail.This includes thermally induced failures, anchor system induced failures, water walls tube failures, NMEJ damages, clinker formation, refractory damages, APH tube chock-up, erosion and corrosion. The solutions to each of these problems will be presented. All repair and refurbishment methods, preventive and predictive maintenance required for CFB boilers will be covered in-depth.</p>
<p>Several studies have confirmed that CFB boilers are the best method for power generation.This is due to their fuel flexibility, and lowest electricity cost among all types of boilers. This technology is in great demand due to various other advantages such as lower emissions as compared to other types of boilers and has a carbon footprint well below the norms laid down by the World Bank emission requirements.</p>
<p>This course is a MUST for anyone who is involved in the design, operation or maintenance of circulating fluidized bed boilers, because it covers how these boilers are designed and provides guidelines and rules that ensure the CFB boilers have great performance. This course will also provide up-dated information in respect to the design of supercritical once-through CFB boilers and ultra supercritical CFB boilers.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><span><strong>Circulating Fluidized Bed Boiler Design:</strong> </span><span>Gain a thorough understanding of the best design methods of circulating fluidized bed boilers.</span></li>
<li><span><strong>Design of Circulating Fluidized Bed Boiler:</strong> Components and Systems</span><span>: Learn</span> <span>all the techniques used to design CFB boiler equipment and systems including furnace, cyclones, economizers, superheaters, reheaters, loop seals, expansion joints, refractory, and L-valves.</span></li>
<li><strong><span>Design of Circulating Fluidized Bed Boiler to Achieve Highest Efficiency, and Best Performance and Economics</span></strong><span><strong>:</strong> Gain a thorough understanding of all the methods used to design CFB boilers having the highest efficiency, longevity and capacity factor as well as best economics.</span></li>
<li><strong><span>Circulating Fluidized Bed Boiler Equipment:</span></strong><span> Learn about various equipment of circulating fluidized bed boilers including: furnaces, cyclones, economizers, superheaters, reheaters, ammonia injection systems, electrostatic precipitators, polishing dry scrubbers, fuel and sorbent feeding systems, bottom ash handling and extraction systems and materials.</span></li>
<li><strong><span>Circulating Fluidized Bed Boiler Environmental Emissions:</span></strong><span> Learn about the monitoring and control of environmental emissions from circulating fluidized boilers.</span></li>
<li><strong><span>Circulating Fluidized Bed Boiler Instrumentation and Control Systems:</span></strong><span> Learn about the latest instrumentation and control systems of circulating fluidized bed boilers.</span></li>
<li><strong><span>Circulating Fluidized Bed Boiler Reliability and Testing:</span></strong><span> Increase your knowledge of predictive and preventive maintenance, reliability and testing of circulating fluidized bed boilers.</span></li>
<li><strong><span>Circulating Fluidized Bed Boiler Selection and Applications: </span></strong><span>Gain a detailed understanding of the selection considerations and applications of circulating fluidized bed boilers.</span></li>
<li><strong><span>Circulating Fluidized Bed Boiler Maintenance:</span></strong><span> Learn all the maintenance activities required for circulating fluidized bed boilers, to minimize their operating cost and maximize their efficiency, reliability, and longevity.</span></li>
<li><strong><span>Circulating Fluidized Bed Boiler Refurbishment, and Life Extension Methods: </span></strong><span>Learn about life cycle cost, profitability, refurbishment, and life extension methods for all types of circulating fluidized bed boilers.</span></li>
<li><strong><span>Circulating Fluidized Bed Boiler Commissioning: </span></strong><span>Understand all the commissioning requirements of circulating fluidized bed boilers.</span></li>
<li><strong><span>Circulating Fluidized Bed Boiler Codes and Standards: </span></strong><span>Learn all the codes and standards applicable for circulating fluidized bed boilers.</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li><span>Engineers of all disciplines</span></li>
<li><span>Managers</span></li>
<li><span>Technicians</span></li>
<li><span>Maintenance personnel</span></li>
<li><span>Other technical individuals</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</span></p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>'POWER GENERATION HANDBOOK' published by McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>Design of Circulating Fluidized Bed Boiler manual (600 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Design Of Circulating Fluidized Bed Boilers

<div>
</div>
<section>
<div>
<h2>About this training course</h2>
<p>This 5 full-day course provides a comprehensive understanding of all the commissioning and start-up activities of all electrical equipment including transformers, switchgear, induction and synchronous motors, generators and auxiliaries. All commissioning activities are covered in detail in this course. This includes all the commissioning procedures and documents, purpose of commissioning, responsibilities, system description, documentation, testing and commissioning schedules, test reports, safety, certification, and plant completion report. The course provides also a thorough understanding of all the commissioning requirements for transformers, switchgear, induction and synchronous motors and, generator and auxiliaries including its switchgear equipment, switchgear, and transformers.</p>
<p>All the stages of the commissioning procedure are covered in-depth in this course. This includes preparation - planning various activities, pre-commissioning checks and tests, typical commissioning schedule, detailed tests and commissioning procedures for every type of transformers, switchgear, induction and synchronous motors, and generators and auxiliary systems, instrumentation, trial run of the equipment, safety and precautions, commissioning of electrical systems, Safety Rules Clearance Certificates, procedure for the control and handling of defects, Commissioning Reports.</p>
<p>This course is a MUST for anyone who is involved in the pre-commissioning or commissioning of any electrical equipment because it provides detailed pre-commissioning checks and tests and detailed tests and commissioning procedures for every electrical equipment. In addition, the course provides in-depth coverage of all preparation, planning activities, commissioning schedules, trial run of each electrical equipment, safety and precautions, Safety Rules Clearance Certificates, Procedures for handling defects, and Commissioning Reports.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong><span>Pre-Commissioning Checks and Tests, Detailed Tests and Commissioning Procedures and Instructions for all Electrical Equipment: </span></strong><span>Gain a thorough understanding of all pre-commissioning checks and tests, and all commissioning procedures and instructions for all electrical equipment</span></li>
<li><strong><span>Commissioning Procedures, Documents, and Certification of Electrical Equipment:</span></strong><span> Discover the benefits of the Commissioning Management System of electrical equipment including all commissioning procedures and documents, purpose of commissioning, responsibilities, system description, documentation, testing and commissioning schedules, test reports, safety, equipment certification, and commissioning completion report</span></li>
<li><span><strong>Commissioning Procedures for Transformers</strong>: </span><span>Learn about the commissioning procedures for transformers including functional checks, pre-commissioning tests, commissioning tests, and records.</span></li>
<li><strong><span>Commissioning Procedures for Switchgear Assemblies: </span></strong><span>Gain a thorough understanding of all the commissioning procedures for switchgear assemblies including substation commissioning, electrical testing, code requirements, safety rules, grounding and shorting, high power testing, NETA acceptance testing procedures, test values analysis, and commissioning forms</span></li>
<li><strong><span>Commissioning Procedures for Generator and Auxiliaries: </span></strong><span>Discover all the commissioning procedures for generator and auxiliaries including generator, seal oil system, hydrogen gas system, stator water system, rolling and payment of generator</span></li>
<li><span><strong>Commissioning Procedures and Instructions for Generator Electrical Equipment:</strong> </span><span>Learn about all the commissioning procedures and instructions for generator electrical equipment including switchyard equipment, switchgear, transformers, and motors</span></li>
<li><strong><span>Code Requirements for Commissioning Electrical Equipment and Systems: </span></strong><span>Learn about the code requirements for commissioning transformers, switchgear, inductions and synchronous motors, and generators and auxiliaries</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li><span>Engineers of all disciplines</span></li>
<li><span>Managers</span></li>
<li><span>Technicians</span></li>
<li><span>Maintenance personnel</span></li>
<li><span>Other technical individuals</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</span></p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>'ELECTRICAL EQUIPMENT HANDBOOK' published by McGraw-Hill in 2003 (600 pages)</span></li>
<li><span>ELECTRICAL EQUIPMENT COMMISSIONING MANUAL (includes practical information about all pre-commissioning checks and tests, typical commissioning schedule, detailed tests and commissioning procedures and instructions for all electrical equipment - 500 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Commissioning of Electrical Equipment

<p style="color: rgb(26, 26, 26); font-size: var(--font-size); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(26, 26, 26);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">This driver CPC course Rules of The Road &amp; Fuel-Efficient Driving is suitable for LGV &amp; PCV and will cover:</strong></p><p style="color: rgb(26, 26, 26); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(26, 26, 26);">Requirements, Speed Limits, SMART Motorways, Highway Code, Road Signs, Bridge Strikes, Mobile Phones, Sat-Navs, Traffic Accident Procedure, Benefits of Fuel-Efficient Driving, Fuels and Fluids, Use of Vehicles,&nbsp;Other Factors,&nbsp;Driving Safely and Fuel Efficiently.</p><p style="color: rgb(26, 26, 26); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(26, 26, 26);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">All courses start at 07:45 hrs and finish at 15:45 hrs</strong></p><p style="color: rgb(26, 26, 26); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(26, 26, 26);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">All courses are 8 hours long with included 2 breaks of 15 minutes and a lunch break of 30 minutes.</strong></p><p style="color: rgb(26, 26, 26); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(26, 26, 26);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Approval:</strong> This course is registered with JAUPT as approved for Driver CPC qualification.</p><p style="color: rgb(26, 26, 26); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(26, 26, 26);">Course Approval Number: CRS18242/475.</p><p style="color: rgb(26, 26, 26); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(26, 26, 26);">On completion of the course all attendees will receive certificate of attendance.</p><p style="color: rgb(26, 26, 26); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(26, 26, 26);">Please note repeat courses are not accepted by DVSA and by joining this course you confirm that you are aware of the modules covered by you and certify that, if you have covered these before you are happy to repeat the modules due to needing further education on the subject.</p>

This driver CPC course Vulnerable Road Users is suitable for LGV & PCV and will cover:
Where Do We Encounter VRU’s? Who Are the VRU’s? Sharing Road Space, Route Planning, New Traffic Systems, Professional Drivers Role, Hazard Perception, Defensive Driving, Blindspots, Vehicle Safety Systems, Cyclists, Pedestrians, Motorcyclists, Horse Riders
All courses start at 07:45 hrs and finish at 15:45 hrs
All courses are 8 hours long with included 2 breaks of 15 minutes and a lunch break of 30 minutes.
Approval: This course is registered with JAUPT as approved for Driver CPC qualification.
Course Approval Number: CRS5814/475.
On completion of the course all attendees will receive certificate of attendance.
Please note repeat courses are not accepted by DVSA and by joining this course you confirm that you are aware of the modules covered by you and certify that, if you have covered these before you are happy to repeat the modules due to needing further education on the subject.

PETM

Road Safety

Driver CPC

Vulnerable Road Users - Online

General Admission

<h1 id="isPasted" style="color: rgb(62, 62, 62); box-sizing: border-box;" fr-original-style=" color: rgb(62, 62, 62);">Online MHFA England Adult Mental Health First Aid Course.&nbsp;</h1><div fr-original-style="" style="box-sizing: border-box;"><a href="https://www.mindmapswellbeing.com/brochure-request/" target="_blank" rel="noopener noreferrer" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">Download brochure for course details here.</a><a href="https://www.mindmapswellbeing.com/_webedit/uploaded-files/All%20Files/Online%20Mental%20Health%20First%20Aid.pdf" rel="noopener noreferrer" target="_blank" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">&nbsp;</a>&nbsp;</div><div fr-original-style="" style="box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></div><div style="color: rgb(62, 62, 62); box-sizing: border-box;" fr-original-style=" color: rgb(62, 62, 62);">This online version of the mental health first aid course will offer the same learning outcomes as the face to face training, and every person who completes the course will be certified as a Mental Health First Aider. &nbsp;The Online Mental Health First Aid course is a blended approach of individual learning and four instructor-led live sessions, hosted on a new Online Learning Hub. &nbsp;As a training course, Mental Health First Aid teaches people how to identify, understand and help someone who may be experiencing a mental health issue. The organisation&#39;s courses and resources also promote self-care as a vital way for people to help protect their mental health and prevent issues from getting worse. &nbsp;As with all our courses at Mindmaps Wellbeing, your course will be delivered by a Registered Mental Health Nurse, MHFA England Instructor and Open University Associate Lecturer and Practice Tutor experienced in remote teaching. Our live online learning will also include an assistant who is a MHFAider. &nbsp;</div><div style="color: rgb(62, 62, 62); box-sizing: border-box;" fr-original-style=" color: rgb(62, 62, 62);"><br fr-original-style="" style="box-sizing: border-box;"></div><div style="color: rgb(62, 62, 62); box-sizing: border-box;" fr-original-style=" color: rgb(62, 62, 62);">Our fee is &pound;300pp Groups of 5+ contact <a href="mailto:info@mindmapswellbeing.com" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">info@mindmapswellbeing.com</a>&nbsp;for reduced group fees.&nbsp;</div><div style="color: rgb(62, 62, 62); box-sizing: border-box;" fr-original-style=" color: rgb(62, 62, 62);"><br fr-original-style="" style="box-sizing: border-box;"></div><div style="color: rgb(62, 62, 62); box-sizing: border-box;" fr-original-style=" color: rgb(62, 62, 62);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Live instructor led sessions;&nbsp;</strong></div><div style="color: rgb(62, 62, 62); box-sizing: border-box;" fr-original-style=" color: rgb(62, 62, 62);">10:00 &ndash; 12:30 &amp; 14:30 &ndash; 17:00 both days&nbsp;</div><div style="color: rgb(62, 62, 62); box-sizing: border-box;" fr-original-style=" color: rgb(62, 62, 62);">Individual learning modules around these times. You will gain access to this on the Friday before your course start date.</div><p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><u fr-original-style="" style="box-sizing: border-box;">Why choosing Mindmaps Wellbeing is a good choice for your training.</u></strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The MHFA England RRP is &pound;325pp, our rate is &pound;300pp and our fee includes:</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">✅ Instructor led training sessions over two days</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">✅ Course Manual</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">✅ Workbook</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">✅ Handy Cue Card</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">✅ MHFAider Certificate upon completion</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Plus, exclusively when you choose Mindmaps Wellbeing, it also includes:</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">✅ Your instructors are <strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Registered Mental Health Nurses and Healthcare Educators</strong> (They of course have their own lived experiences too, which they bring to the course, ensuring the content is brought to life).</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">✅ Access to our online MHFAider peer support groups moderated by the instructor team.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">✅ Access to MINDWELL companion for resources, self-care, and ongoing guidance to support you in the role as a MHFAider.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">✅ Advanced Delegate Plan &ndash; This allows delegates to book onto our open courses on dates that suit, with the best value on course fees available.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">&nbsp;</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">For a little extra:&nbsp;</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">✅ Quarterly Facilitated MHFAider Forum &ndash; to provide ongoing expert support and guidance.&nbsp;</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">✅ Organisational MINDWELL Companion tailored for your workplace / organisation.</p>

Online MHFA England Adult Mental Health First Aid Course. 
Download brochure for course details here.  This online version of the mental health first aid course will offer the same learning outcomes as the face to face training, and every person who completes the course will be certified as a Mental Health First Aider. The Online Mental Health First Aid course is a blended approach of individual learning and four instructor-led live sessions, hosted on a new Online Learning Hub. As a training course, Mental Health First Aid teaches people how to identify, understand and help someone who may be experiencing a mental health issue. The organisation's courses and resources also promote self-care as a vital way for people to help protect their mental health and prevent issues from getting worse. As with all our courses at Mindmaps Wellbeing, your course will be delivered by a Registered Mental Health Nurse, MHFA England Instructor and Open University Associate Lecturer and Practice Tutor experienced in remote teaching. Our live online learning will also include an assistant who is a MHFAider. Our fee is £300pp Groups of 5+ contact info@mindmapswellbeing.com for reduced group fees. Live instructor led sessions; 10:00 – 12:30 & 14:30 – 17:00 both days Individual learning modules around these times. You will gain access to this on the Friday before your course start date.
Why choosing Mindmaps Wellbeing is a good choice for your training.
The MHFA England RRP is £325pp, our rate is £300pp and our fee includes:
✅ Instructor led training sessions over two days
✅ Course Manual
✅ Workbook
✅ Handy Cue Card
✅ MHFAider Certificate upon completion
Plus, exclusively when you choose Mindmaps Wellbeing, it also includes:
✅ Your instructors are Registered Mental Health Nurses and Healthcare Educators (They of course have their own lived experiences too, which they bring to the course, ensuring the content is brought to life).
✅ Access to our online MHFAider peer support groups moderated by the instructor team.
✅ Access to MINDWELL companion for resources, self-care, and ongoing guidance to support you in the role as a MHFAider.
✅ Advanced Delegate Plan – This allows delegates to book onto our open courses on dates that suit, with the best value on course fees available.
 
For a little extra: 
✅ Quarterly Facilitated MHFAider Forum – to provide ongoing expert support and guidance. 
✅ Organisational MINDWELL Companion tailored for your workplace / organisation.

Mindmaps Wellbeing

Health & Wellbeing

Occupational Health & Wellbeing

Mental Health

Accredited Mental Health First Aid

Mental Health At Work

Mental Health Nurse

Online MHFA England mental health first aid course delivered by Registered Mental Health Nurses from Mindmaps Wellbeing. 

Why choosing Mindmaps Wellbeing is a good choice for your mental health training.
The MHFA England RRP is £325pp, our rate is £300pp and our fee includes:
✅ Instructor led training sessions over two days 
✅ Course Manual
✅ Workbook
✅ Handy Cue Card
✅ MHFAider Certificate upon completion
Plus, exclusively when you choose Mindmaps Wellbeing, it also includes:

✅ Your instructors are Registered Mental Health Nurses and Healthcare Educators (They of course have their own lived experiences too, which they bring to the course, ensuring the content is brought to life).

✅ Access to our online MHFAider peer support groups moderated by the instructor team.

✅ Access to MINDWELL companion for resources, self-care, and ongoing guidance to support you in the role as a MHFAider.

✅ Advanced Delegate Plan – This allows delegates to book onto our open courses on dates that suit, with the best value on course fees available.

For a little extra: 

✅ Quarterly Facilitated MHFAider Forum – to provide ongoing expert support and guidance. 

✅ Organisational MINDWELL Companion tailored for your workplace / organisation.


MHFA England Mental Health First Aid

Crawley

QNUK Level 3 Award in Mental Health at Work (RQF) - Distance Learning
This course carries 8 UCAS Points 
The QNUK Level 3 Award in Mental Health at Work (RQF) is a comprehensive course designed to equip individuals with the skills and knowledge to promote positive mental health in the workplace. This course is delivered through a flexible distance learning format, allowing participants to complete the training at their own pace from the comfort of their home or office. It also attracts 8 UCAS points, providing added value for learners looking to enhance their professional qualifications and academic progression.

The course covers key concepts in mental health awareness, focusing on recognizing the signs of mental health issues in the workplace, providing initial support, and promoting mental well-being among colleagues. Learners will also explore strategies for reducing stigma, improving workplace culture, and understanding their role in mental health advocacy.

Participants will:
- Gain a thorough understanding of common mental health conditions and their impact on individuals and workplaces.
- Learn how to support colleagues experiencing mental health challenges and provide appropriate first-line responses.
- Develop skills to promote mental well-being and a supportive work environment.
- Understand the legal frameworks and responsibilities relating to mental health at work.

Upon successful completion of the course, learners will receive the QNUK Level 3 Award in Mental Health at Work (RQF) and earn 8 UCAS points. This qualification is invaluable for anyone seeking to enhance their ability to contribute to a mentally healthy workplace.

Self-paced distance learning (typically 8-10 hours of study)

QNUK Level 3 Award in Mental Health at Work (RQF) (valid for 3 years)

This course is suitable for individuals wanting to learn more or managers, supervisors, HR professionals, and any individual looking to support mental health initiatives in their workplace, or those seeking a foundational qualification in workplace mental health.

Comply Sense

Mental Health Awareness

Mental Health First Aid

Workplace Health & Safety

This level 3 award training will equip you with all the tools you need to be able to understand, deal with and support people struggling with their wellness and/ or ill mental health. You will also gain 8 UCAS Points by attending this course. 

QNUK Level 3 Award in Mental Health in the Workplace (RQF) 

<div style="color: rgb(36, 39, 41); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(36, 39, 41);">The theory assessment provides delegates with the essential knowledge to select, monitor, manage and plan the correct use of Harnesses and lanyards for use in a MEWP.</div><div style="color: rgb(36, 39, 41); box-sizing: border-box;" fr-original-style=" color: rgb(36, 39, 41);"><br fr-original-style="" style="box-sizing: border-box;"></div><div style="color: rgb(36, 39, 41); box-sizing: border-box;" fr-original-style=" color: rgb(36, 39, 41);">Delegates successfully completing the e-learning will:<br fr-original-style="" style="box-sizing: border-box;"><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Have an awareness of how to correctly identify and select the appropriate form of personal<br fr-original-style="" style="box-sizing: border-box;">protection against falls from MEWPs.</li><li fr-original-style="" style="box-sizing: border-box;">Have a theoretical awareness only of how to check, use, maintain and store a harness and<br fr-original-style="" style="box-sizing: border-box;">lanyard with manufacturer&rsquo;s instructions.</li><li fr-original-style="" style="box-sizing: border-box;">Have a theoretical awareness of how harnesses and lanyards should be fitted and adjusted.</li></ul></div>

Kingfisher Access

The theory assessment provides delegates with the essential knowledge to select, monitor, manage and plan the correct use of Harnesses and lanyards for use in a MEWP.

Delegates successfully completing the e-learning will:
Have an awareness of how to correctly identify and select the appropriate form of personal
protection against falls from MEWPs.
Have a theoretical awareness only of how to check, use, maintain and store a harness and
lanyard with manufacturer’s instructions.
Have a theoretical awareness of how harnesses and lanyards should be fitted and adjusted.

IPAF - Harness Awareness 

Hello Loves!


It's my birthday on 26th October! and as life has been a bit busy the last weeks (business, a breakup and butt grounding!), I haven't put together an in-person celebration. But that's ok! Instead what I'd love to do is offer a magic show for my friends to enjoy! What I'll be doing is turning coffee and cake into music! 


I've found recently that I've got a talent for transmutation. And I'm going to put my skills to the test. "What is she talking about?" I hear you ask... right? ... Well, as I haven't been able to organise a gathering to celebrate with you this year, I'm inviting you to buy me a birthday coffee (or slice of red velvet cake, or parmegian pizza mmm!), and I'm going to use my magic powers to turn this into a loopstation - and play you some funky music, because you know me... it's simply what I love to do! :D I would also LOVE to have a phone call or video call with you too, let's catch up, I hope that life's business wont keep us apart!


To make this magic work, I invite you to take me on a metaphorical birthday coffee or cake date 😄 In the booking link you can do exactly that (or choose some other yummy options) and help me perform this magic!

If you do, I'll make sure to have a live coffee/cake call with you, and make you a personal comedy loop, to give so some smiles and laughs back in return! and I will squish you so hard when I see you (Well either way, you know I'll do that when I see you 😄)

I'm super excited to share more of my love, joy and creativity with the loopstation this year, in India (flying in 2 weeks) and the UK, and your input would boost my chances to do so <3 

Life's been a bit weird recently and I hope I can keep the joy alive for us all in my own special way!


(SOO in other words this is a birthday crowdfunder to help to gift me a Loopstation. I'm currently about £100 short.  If you would like to gift me the equivalent of buying a coffee or a cake, to aid my fundraiser, you can do by buying one of the 3 options on this booking page) - So that in the future I can organise some fun boogey dancey times for us together!


If you would like to contribute a Birthday coffee, you can do until 28th October (because after that it's a bit past the birthday mark (and I need to purchase the loop station soon) :'D) 


*Please note, no physical coffee, cake or pizza will be provided after purchase. (But musical, metaphorical food and beverage items maybe be voiced)
**There is also a free option incase you read all this way but aren't in a place to contribute, this option is like a free email birthday card :)


I'm silly I know! 

I LOVE YOU! 

Squishes and Big Love from Saraswati Vanisha xxx




Sing for Your Soul

Saraswati Vanisha's Birthday Magic Hat Show!

optional sprinkles marshmallows or cinnamon pop corn on top :)

Choco Mocha Yummy Coffee Gift

Yummy Vegan beetroot cake with tahini cream and dates.. oohh yeah

Red Velvet Birthday Cake Gift

Baked aubergine, tomato marinara and melted mozarella - Its like mousakka on a pizza, one of my favourite dishes ever!

Parmigan Pizza - Birthday Date Gift

Thai Green Curry with coconut rice and Edamame beans side GIft

I've read it all and vision only love your way, but I can't contribute to the fund <3 (also I don't condone virtual food magic)

Hugs and Squishes for the Journey

Oldham

<div data-id="707b00e3" data-element_type="container" data-settings='{"content_width":"full"}' style="color: rgb(9, 13, 24); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(9, 13, 24);"><div data-id="1c97cfcc" data-element_type="widget" data-widget_type="woocommerce-product-content.default" style="color: rgb(50, 74, 109); box-sizing: border-box;" fr-original-style=" color: rgb(50, 74, 109);"><p style="color: rgb(50, 74, 109); font-size: var(--font-size); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(50, 74, 109);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">International markets offer huge Export opportunities for UK businesses.</strong><br fr-original-style="" style="box-sizing: border-box;">Finding and developing new markets for products is a hugely valuable avenue for expansion and in some sectors in particular, global demand for British brands and products makes international trade an excellent means of growth.</p><p style="color: rgb(50, 74, 109); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(50, 74, 109);">Selling internationally is very complex but &ndash; as with most things &ndash; easy with help and appropriate training.</p><p style="color: rgb(50, 74, 109); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(50, 74, 109);">This virtual half-day course covers all the basic key areas around exporting. The course will explain the requirements for documentation, plus an overview of country of origin and incoterms.</p><p style="color: rgb(50, 74, 109); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(50, 74, 109);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Please note: If you are working towards your British Chamber of Commerce (BCC) Foundation Award, this course will count towards 1 of your 6 modules. Please make sure you select the &lsquo;Yes&rsquo; option in the dropdown option for BCC when booking.</strong></p></div></div><div data-id="60285c8" data-element_type="container" data-settings='{"content_width":"full"}' style="color: rgb(9, 13, 24); box-sizing: border-box;" fr-original-style=" color: rgb(9, 13, 24);"><br fr-original-style="" style="box-sizing: border-box;"></div>

International markets offer huge Export opportunities for UK businesses.
Finding and developing new markets for products is a hugely valuable avenue for expansion and in some sectors in particular, global demand for British brands and products makes international trade an excellent means of growth.
Selling internationally is very complex but – as with most things – easy with help and appropriate training.
This virtual half-day course covers all the basic key areas around exporting. The course will explain the requirements for documentation, plus an overview of country of origin and incoterms.
Please note: If you are working towards your British Chamber of Commerce (BCC) Foundation Award, this course will count towards 1 of your 6 modules. Please make sure you select the ‘Yes’ option in the dropdown option for BCC when booking.

Export Unlocked Limited

Trade & Commerce

International Trade

British Chambers of Commerce (BCC)

Import/Export

Export Management

International markets offer huge Export opportunities for UK businesses. Finding and developing new markets for products is a hugely valuable avenue for expansion and in some sectors in particular, global demand for British brands and products makes international trade an excellent means of growth.

EXPORT PROCEDURES & DOCUMENTATION

<div style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);"><p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><u fr-original-style="" style="box-sizing: border-box;">Using Canva to Create Content</u></strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Want to learn how to create eyecatching and engaging graphics for your business? Join our Using Canva workshop to find out how to utilise the online graphic design platform Canva to make everything from your company branding to social media posts and more!</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">&nbsp;</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">In this course, we&rsquo;ll cover everything from:</strong></p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;"><b fr-original-style="" style="box-sizing: border-box;">How to sign up and get set up on the platform</b></li><li fr-original-style="" style="box-sizing: border-box;"><b fr-original-style="" style="box-sizing: border-box;">How to navigate Canva as a beginner</b></li><li fr-original-style="" style="box-sizing: border-box;"><b fr-original-style="" style="box-sizing: border-box;">Creating a brand kit for your business</b></li><li fr-original-style="" style="box-sizing: border-box;"><b fr-original-style="" style="box-sizing: border-box;">Creating a new graphic together for a campaign for a business</b></li><li fr-original-style="" style="box-sizing: border-box;"><b fr-original-style="" style="box-sizing: border-box;">Walkthrough of all the basic features of Canva&nbsp;</b></li><li fr-original-style="" style="box-sizing: border-box;"><b fr-original-style="" style="box-sizing: border-box;">Resizing designs to make posters and leaflets</b></li></ul><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">&nbsp;</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">As part of the live event of this workshop, we will also have a Questions and Answers session to finish this online workshop, where participants can ask specific questions about how to use Canva for their business.</strong></p></div><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">&nbsp;</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><u fr-original-style="" style="box-sizing: border-box;">Event details:</u></p><span dir="ltr" id="isPasted" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Date: Wednesday 30th October 2024</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Time: 10am &ndash; 11.30am</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Location: Online (ZOOM)</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">For: Businesses based in Luton</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></p><hr fr-original-style="" style="border-color: var(--border-muted); border-style: solid; clear: both; break-after: page; user-select: none; box-sizing: border-box;"><p style="color: windowtext; font-size: var(--font-size); box-sizing: border-box;" id="isPasted" fr-original-style=" color: windowtext;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">The Luton Online: Digital Marketing Launchpad is a project funded by the UK Government through the UK Shared Prosperity Fund.</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The UK Shared Prosperity Fund is a central pillar of the UK government&#39;s Levelling Up agenda and provides &pound;2.6 billion of funding for local investment by March 2025. The Fund aims to improve pride in place and increase life chances across the UK investing in communities and place, supporting local business, and people and skills. For more information, visit: <a href="https://www.gov.uk/government/publications/uk-shared-prosperity-fund-prospectus" target="_blank" rel="noopener noreferrer" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">https://www.gov.uk/government/publications/uk-shared-prosperity-fund-prospectus</a></p></span>

Using Canva to Create Content
Want to learn how to create eyecatching and engaging graphics for your business? Join our Using Canva workshop to find out how to utilise the online graphic design platform Canva to make everything from your company branding to social media posts and more!
 
In this course, we’ll cover everything from:
How to sign up and get set up on the platform
How to navigate Canva as a beginner
Creating a brand kit for your business
Creating a new graphic together for a campaign for a business
Walkthrough of all the basic features of Canva
Resizing designs to make posters and leaflets
 
As part of the live event of this workshop, we will also have a Questions and Answers session to finish this online workshop, where participants can ask specific questions about how to use Canva for their business.
 
Event details:
Date: Wednesday 30th October 2024
Time: 10am – 11.30am
Location: Online (ZOOM)
For: Businesses based in Luton





The Luton Online: Digital Marketing Launchpad is a project funded by the UK Government through the UK Shared Prosperity Fund.
The UK Shared Prosperity Fund is a central pillar of the UK government's Levelling Up agenda and provides £2.6 billion of funding for local investment by March 2025. The Fund aims to improve pride in place and increase life chances across the UK investing in communities and place, supporting local business, and people and skills. For more information, visit: https://www.gov.uk/government/publications/uk-shared-prosperity-fund-prospectus

Let’s Do Business Group

Social Media Marketing

Content Creation

Social Media

Canva

Using Canva to Create Content

<div id="course-pills-1">Duration<p>1 Days</p><p>6 CPD hours</p>This course is intended for<p>The intended audience for this course would be those who have been using Office 365 for some time and are now looking at optimizing their existing business processes and designing new ones.</p>Overview<p>#NAME?</p><p>This course delivers an instructor-led product showcase for Microsoft Power Automate from start to finish in an engaging and practical way. Power Automate is a diverse product, turning business processes into automated, consistent and visual workPower Automates. Power Automate is designed to interweave the various products in Office 365 as well as connect to other on-premises and web-based solutions. This course will give you the confidence to select the right actions and workPower Automate logic for your business workPower Automates.</p></div><div id="course-pills-2"><h3>1 - An Introduction to Power Automate</h3> <ul> <li>What is Microsoft Power Automate?</li> <li>The benefits of automation</li> <li>How to get to Power Automate</li> <li>Lab 1: Setup your tenant</li> <li>Setup Office 365</li> <li>Download Course Files</li> <li>Customise your App Launcher</li> <li>Create accounts for colleagues</li> <li>After completing this module, students will be able to:</li> <li>Know what Microsoft Power Automate is</li> <li>The Benefits of using Power Automate to automate processes</li> <li>How to access a Power Automate</li> </ul> <h3>2 - Getting Started with Power Automate</h3> <ul> <li>Using Power Automate templates</li> <li>Navigating in Power Automate</li> <li>Editing a Power Automate</li> <li>Publish and trigger a Power Automate</li> <li>Turn off or delete a Power Automate</li> <li>Lab 1: Building processes in Office 365</li> <li>Create a Team with a channel</li> <li>Build an absence business process</li> <li>Testing the absence process</li> <li>Optional: Create Feedback Form</li> <li>Optional: Power Automate to Notify of Bad Ratings</li> <li>Optional: Test your Form and Power Automate</li> <li>After completing this module, students will be able to:</li> <li>How to use Power Automate tempaltes</li> <li>How to navigate around Power Automate</li> <li>How to edit Power Automates</li> <li>How to publish and trigger Power Automates</li> <li>How to turn off or delete Power Automates</li> </ul> <h3>3 - Power Automate Logic</h3> <ul> <li>Adding conditions</li> <li>Designing switches</li> <li>Using apply to each</li> <li>Configuring do until logic</li> <li>Adding a scope</li> <li>Lab 1: Scheduling documentation reviews</li> <li>Setup a policy library in SharePoint</li> <li>Design a policy review schedule</li> <li>Testing the policy review process</li> <li>Optional: Notify if a file nears review</li> <li>After completing this module, students will be able to:</li> <li>How to add condtions in a Power Automate</li> <li>How to design switches for a Power Automate</li> <li>How to use apply to each</li> <li>How to configure do until logic</li> <li>How to add a scope</li> </ul> <h3>4 - Integration</h3> <ul> <li>Standard and premium connectors</li> <li>Connecting to web services</li> <li>Using Power Automate with on-premises data</li> <li>Lab 1: Using Power Automate and SQL to Review Sales</li> <li>Create a new orders list</li> <li>Designing the price check process</li> <li>Testing the price check process</li> <li>Optional: Update with managers</li> <li>After completing this module, students will be able to:</li> <li>How to use Standard and Premium connectors</li> <li>How to connect to web services</li> <li>How to using Power Automate with on-premises data</li> </ul> <h3>5 - The Mobile App</h3> <ul> <li>Downloading the mobile app</li> <li>Signing in and account management</li> <li>Building and managing Power Automates</li> <li>Creating buttons</li> <li>Feeds and approvals</li> <li>Lab 1: Optional: Using the Power Automate mobile app</li> <li>Setting up the Power Automate mobile app</li> <li>Create a new Power Automate in the mobile app</li> <li>Using Power Automate buttons in the app</li> <li>Uninstall the Power Automate mobile app</li> <li>After completing this module, students will be able to:</li> <li>How to download the mobile app</li> <li>How to sign into the mobile app</li> <li>How to build and manage Power Automates in the mobile app</li> <li>How to create buttons in the mobile app</li> <li>How to feed and use approvals in the mobile app</li> </ul> <h3>6 - Administration and Maintenance</h3> <ul> <li>Maintaining a Power Automate</li> <li>View history and analytics</li> <li>Sharing a Power Automate</li> <li>Export and import Power Automates</li> <li>Office 365 administration for Power Automate</li> <li>Environments</li> <li>Data policies</li> <li>Data integration</li> <li>Lab 1: Maintaining your Power Automates</li> <li>Share a Power Automate with a colleague</li> <li>Disabling an active Power Automate</li> <li>Deleting a Power Automate</li> <li>After completing this module, students will be able to:</li> <li>How to maintain a Power Automate</li> <li>How to view history and analytics for a Power Automate</li> <li>How to share a Power Automate</li> <li>How to export and import Power Automates</li> <li>How to administrate a Power Automate in Office 365</li> <li>How to use data policies in a Power Automate</li> <li>How to use data integration in a Power Automate</li> </ul></div>

Nexus Human

Microsoft Power Apps

Power Apps

Microsoft 365

Microsoft Power Platform

Power Automate

Microsoft Power Automate

55268 Microsoft Power Automate for End Users

<p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The qualification is designed for learners who have responsibility for promoting health choices within the workplace, or who would like to get involved in championing workplace health.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">This level 2 course is delivered online across two sessions, both must be attended in order to achieve the qualification.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Session 1:</strong></p><ul type="disc" fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Introduction</li><li fr-original-style="" style="box-sizing: border-box;">The importance of workplace health to employers and their employees</li><li fr-original-style="" style="box-sizing: border-box;">The role of a Workplace Health Champion</li><li fr-original-style="" style="box-sizing: border-box;">Factors affecting physical and mental health</li></ul><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Session 2:</strong></p><ul type="disc" fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Recap</li><li fr-original-style="" style="box-sizing: border-box;">Key behaviour change principles</li><li fr-original-style="" style="box-sizing: border-box;">The need to safeguard adults as a Workplace Health Champion</li><li fr-original-style="" style="box-sizing: border-box;">Key elements involved in planning and preparing for a sport of physical activity session</li><li fr-original-style="" style="box-sizing: border-box;">How to measure the success of a sport or physical activity session</li><li fr-original-style="" style="box-sizing: border-box;">Tutor discussion / competence of qualification.</li></ul><p style="color: rgb(0, 0, 0); font-size: var(--font-size); box-sizing: border-box;" id="isPasted" fr-original-style="color: rgb(0, 0, 0);"><br fr-original-style="" style="box-sizing: border-box;"></p>

The qualification is designed for learners who have responsibility for promoting health choices within the workplace, or who would like to get involved in championing workplace health.
This level 2 course is delivered online across two sessions, both must be attended in order to achieve the qualification.
Session 1:
Introduction
The importance of workplace health to employers and their employees
The role of a Workplace Health Champion
Factors affecting physical and mental health
Session 2:
Recap
Key behaviour change principles
The need to safeguard adults as a Workplace Health Champion
Key elements involved in planning and preparing for a sport of physical activity session
How to measure the success of a sport or physical activity session
Tutor discussion / competence of qualification.



Active Lancashire

Level 2 Introduction to Workplace Health Champion 

<p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">These short-courses are designed to provide a snapshot into the key areas of the language for a variety of levels. &nbsp;Designed to be self-contained; you will not be required to purchase textbooks or extra materials; everything you need will be provided, including access to my online learning materials. &nbsp;You will also receive the PowerPoint slides, the agenda for the following week &amp; any homework set after each class. &nbsp;</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">I have designed all the slides myself for thee 10-week courses, as I wanted to use my 10+ years of experience to develop something different from the traditional &ldquo;here&rsquo;s a textbook&rdquo; approach that lots of evening classes use. &nbsp;This class is designed to get you speaking in a way that will propel you forward with your language skills in practical settings.&nbsp;</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Each learner is entitled to a <strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">free 15-minute introduction session</strong> on Zoom so that we can get to know each other and assess your current level. &nbsp;I will also talk you through the controls on Zoom if you are not familiar with how to use it. &nbsp;</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Each course is comprised of 10 x 1 hour sessions. &nbsp;The groups will contain approximately 3-4 students (with an absolute maximum of 6 students) and are designed to encourage learners to strengthen their speaking skills in a relaxed, friendly atmosphere &amp; learn language skills in a social environment. &nbsp;If you miss a session, it may be possible to join another class running the same session at another time that week, or you can request receiving the learning materials via email. &nbsp;</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The courses are designed to have practical application for travel &amp; learning for personal interest. &nbsp;I firmly believe having a grammar component is key for long-term success with learning a language, but I promise to break it down so that it isn&rsquo;t overwhelming!</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">When a 10-week course finishes, it will be followed by three weeks of optional revision classes. &nbsp;After this, you can simply choose to join the next level course, until you reach a level where you can join our conversation classes.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">You may also like to consider a blended learning approach; group classes are friendlier for your budget than private one-to-one tuition, but top up any time with one of my <a href="http://www.pronouncelanguages.co.uk/online-lessons" target="" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">private lessons</a> to consolidate your learning, ask further questions, revisiting themes or investigate a topic of particular interest to you that may not be covered in the short course.  </p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">This second course from Pronounce Languages is designed for those who have already taken our Absolute Beginners course, or those who already have some existing knowledge of Spanish. &nbsp;It is strongly recommended that you discuss your level with your tutor before taking this course if you have not completed a class with us before.</p>

Pronounce Languages

Spanish

Language Teaching

Teaching Online

Online Education

An exciting 10-week course to build your Spanish skills from scratch.  Practical applications for travel & conversation.  Enlarge your vocabulary, improve your grammar in a pain-free, step-by-step way, working with a tutor with 10+ years' experience & a small group of learners.

2538 Courses in Glasgow

Steam Turbine Technology

By EnergyEdge - Training for a Sustainable Energy Future

Integrated Field Development Planning for Offshore Fields

By EnergyEdge - Training for a Sustainable Energy Future

Water Chemistry for Thermal Power Station Plant Chemist & Boiler Engineers

By EnergyEdge - Training for a Sustainable Energy Future

Industrial Instrumentation and Modern Control Systems

By EnergyEdge - Training for a Sustainable Energy Future

Gas Turbines, Co-Generation and Combined Cycle Power Plants

By EnergyEdge - Training for a Sustainable Energy Future

Sale & Purchase of Oil & Gas Properties

By EnergyEdge - Training for a Sustainable Energy Future

Combustion Engineering for Coal Fired Power Plants

By EnergyEdge - Training for a Sustainable Energy Future

Introduction to Power Systems

By EnergyEdge - Training for a Sustainable Energy Future

Design Of Circulating Fluidized Bed Boilers

By EnergyEdge - Training for a Sustainable Energy Future

Commissioning of Electrical Equipment

By EnergyEdge - Training for a Sustainable Energy Future

Search By Location