Stoke on Trent

<h2>Course Details</h2>Overview of the CITB TWCTC Course
The Temporary works coordinator training course (TWCTC) is designed to assist those on site who have responsibility for managing all forms of temporary works. The course has been designed to give confidence to senior management, and to ensure that those who engage contractors have an assessed standard of knowledge.This course will give the delegate a thorough knowledge of the temporary works coordinator (TWC) role. However, this does not make a delegate competent by itself. Competence requires other attributes, such as experience. 

Entry requirements
There are no formal entry requirements. However, delegates should hold, or be about to hold, the role of a TWC.

Assessment
Assessment will be by a multiple-choice examination at the end of the course. Delegates will also be expected to interact and participate during the course. 

The examination paper is compulsory and consists of 25 multiple-choice questions selected by CITB. It forms the basis of assessing whether a delegate has achieved a sufficient level of understanding to be awarded the Temporary works coordinator training course (TWCTC) certificate. 

The examination lasts for 30 minutes and must be completed within this time. 
The examination is open book.
The examination pass mark is 72%

Length of Course
This course is designed to be completed over two consecutive days. Delegates are required to attend both days (14 hours) and to pass the end-of-course assessment to be eligible for certification.

The natural progression from this course would be to either the Site management safety training scheme (SMSTS) or Director's role for health and safety (DRHS) course, where duties allow. 

The course is supported by a number of organisations, including the Temporary Works forum, CECA, Build UK, HSE and FMB. This enables transferability of the training within the industry. Temporary works are safety- and business-critical and require careful coordination. An accepted way of achieving this is through the adoption of the management process outlined in BS 5975:2019, which introduces the temporary works coordinator (TWC) as a key figure. This course explains the role and its overall management context. Temporary works on both smaller and larger sites can be high risk. Therefore, understanding the essentials of good risk and safety management, as outlined in BS 5975:2019, is relevant for projects of all sizes.

Course Details
Overview of the CITB TWCTC Course
The Temporary works coordinator training course (TWCTC) is designed to assist those on site who have responsibility for managing all forms of temporary works. The course has been designed to give confidence to senior management, and to ensure that those who engage contractors have an assessed standard of knowledge.This course will give the delegate a thorough knowledge of the temporary works coordinator (TWC) role. However, this does not make a delegate competent by itself. Competence requires other attributes, such as experience. Entry requirements
There are no formal entry requirements. However, delegates should hold, or be about to hold, the role of a TWC. Assessment
Assessment will be by a multiple-choice examination at the end of the course. Delegates will also be expected to interact and participate during the course. The examination paper is compulsory and consists of 25 multiple-choice questions selected by CITB. It forms the basis of assessing whether a delegate has achieved a sufficient level of understanding to be awarded the Temporary works coordinator training course (TWCTC) certificate. The examination lasts for 30 minutes and must be completed within this time. The examination is open book.
The examination pass mark is 72% Length of Course
This course is designed to be completed over two consecutive days. Delegates are required to attend both days (14 hours) and to pass the end-of-course assessment to be eligible for certification. The natural progression from this course would be to either the Site management safety training scheme (SMSTS) or Director's role for health and safety (DRHS) course, where duties allow. The course is supported by a number of organisations, including the Temporary Works forum, CECA, Build UK, HSE and FMB. This enables transferability of the training within the industry. Temporary works are safety- and business-critical and require careful coordination. An accepted way of achieving this is through the adoption of the management process outlined in BS 5975:2019, which introduces the temporary works coordinator (TWC) as a key figure. This course explains the role and its overall management context. Temporary works on both smaller and larger sites can be high risk. Therefore, understanding the essentials of good risk and safety management, as outlined in BS 5975:2019, is relevant for projects of all sizes. 

You Can Do It .Training

Citb

Certificate in Teaching Program (CTP)

Certificate of Completion of Training (CCT)

CSCS (Construction Skills Certification Scheme)

Site Management Safety Training Scheme (SMSTS)

Engineering Construction Industry Training (ECITB)

This course is designed to assist those on site who have responsibility for managing all forms of...

CITB Temporary Works Coordinator On-Site

<h2>Course Details</h2>Overview of the CITB SMSTS-R Course
The CITB Site Managers Safety Training Scheme course is designed for delegates who have previously passed the full Site management safety training scheme (SMSTS) course or subsequent refresher course, and can provide proof of attendance. It aims to bring health and safety knowledge up-to-date, as well as giving a thorough overview of the legislative changes and their impact in the workplace. The course provides an opportunity to revisit the wide range of topics from the previous five-day course.

Entry requirements
The refresher course is only for delegates who have previously passed the five-day SMSTS or subsequent refresher course, and hold a valid SMSTS certificate. Evidence must be provided to the training provider of their eligibility.

Assessment
Successful completion of the course requires the delegate to pass an exam paper at the end of the course. 

The paper consists of 25 questions, selected by CITB, covering all aspects of the course. The exam paper must be taken at the end of the course. 
Each paper has: 
• 18 multiple choice questions (each worth one mark) 
• 7 questions in multi-response or short written answer format (each worth two marks)

The exam pass mark is 81% (26 out of 32). The exam lasts for 35 minutes and must be completed within this time under exam conditions. Delegates are permitted to use the Construction site safety - The comprehensive guide (GE700) publication for the last 15 minutes of the exam.

Length of Course
This is a two-day course. Delegates are required to complete the full course (15 hours) to be eligible for certification.

The course aims to bring health and safety knowledge up-to-date, as well as giving a thorough overview of the legislative changes and their impact in the workplace. The course provides an opportunity to revisit the wide range of topics from the previous five-day course.

Course Details
Overview of the CITB SMSTS-R Course
The CITB Site Managers Safety Training Scheme course is designed for delegates who have previously passed the full Site management safety training scheme (SMSTS) course or subsequent refresher course, and can provide proof of attendance. It aims to bring health and safety knowledge up-to-date, as well as giving a thorough overview of the legislative changes and their impact in the workplace. The course provides an opportunity to revisit the wide range of topics from the previous five-day course. Entry requirements
The refresher course is only for delegates who have previously passed the five-day SMSTS or subsequent refresher course, and hold a valid SMSTS certificate. Evidence must be provided to the training provider of their eligibility. Assessment
Successful completion of the course requires the delegate to pass an exam paper at the end of the course. The paper consists of 25 questions, selected by CITB, covering all aspects of the course. The exam paper must be taken at the end of the course. Each paper has: • 18 multiple choice questions (each worth one mark) • 7 questions in multi-response or short written answer format (each worth two marks) The exam pass mark is 81% (26 out of 32). The exam lasts for 35 minutes and must be completed within this time under exam conditions. Delegates are permitted to use the Construction site safety - The comprehensive guide (GE700) publication for the last 15 minutes of the exam. Length of Course
This is a two-day course. Delegates are required to complete the full course (15 hours) to be eligible for certification. The course aims to bring health and safety knowledge up-to-date, as well as giving a thorough overview of the legislative changes and their impact in the workplace. The course provides an opportunity to revisit the wide range of topics from the previous five-day course.


Site Safety Supervisor

Construction Safety

Site Supervisor

SSSTS

This course is for you if you have previously passed the Site Management Safety Training Scheme...

CITB SMSTS Refresher (2 Days) (On-Site)

<h2>Course Details</h2>If no dates are available, please contact the office on 01782 438813 for our next dates. 

This course gives delegates a better understanding of safety and the assessment of risk when working within confined spaces, keeping individuals and those around them safe.

ð Course Contents
Understand the legislation applying to Confined Space work
Understand Hazards associated with Confined Space
Undertake Risk Assessments for Confined Space work
Develop Safe Systems of Work and Safe Methods of Work for Confined Space operations (Including Risk Assessments, Method Statements, Rescue Plans and Permit to Work)
Safety Person (Top Man) Responsibilities
Understand the mechanism of atmosphere testing and monitoring
Develop, install and maintain emergency plans and procedures
Maintain records and documents for Confined Space work

If no dates are available please call the team on 01782 438813 for available dates.

Course Details
If no dates are available, please contact the office on 01782 438813 for our next dates. This course gives delegates a better understanding of safety and the assessment of risk when working within confined spaces, keeping individuals and those around them safe. ð Course Contents
Understand the legislation applying to Confined Space work
Understand Hazards associated with Confined Space
Undertake Risk Assessments for Confined Space work
Develop Safe Systems of Work and Safe Methods of Work for Confined Space operations (Including Risk Assessments, Method Statements, Rescue Plans and Permit to Work)
Safety Person (Top Man) Responsibilities
Understand the mechanism of atmosphere testing and monitoring
Develop, install and maintain emergency plans and procedures
Maintain records and documents for Confined Space work If no dates are available please call the team on 01782 438813 for available dates.

First Aid At Work

Health & Safety Awareness

Confined Space

Safety Awareness

This 1/2 day course gives delegates a better understanding of safety and the assessment of risk.

Confined Space Awareness (On-Site)

<h2>Course Details</h2>Overview of the CITB SMSTS Course
The CITB Site Managers Safety Training Scheme course is designed for site managers, or aspiring site managers. It is designed for those with responsibility for managing, monitoring, implementing and reporting in a construction environment.

Assessment
To successfully achieve the course, delegates must:
Complete all four core exercises
Pass the trainer review and
Pass the end of course exam

The trainer review provides a pass/fail based on the delegate's performance and engagement in the core exercises and engagement in the course overall. Details of this are provided in XA6T.

The paper consists of 25 questions, selected by CITB, covering all aspects of the course. The exam must be taken at the end of the course. Each
Exam paper has:
18 multiple choice questions (each worth one mark)
7 questions in multi-response or short written answer format (each worth two marks)

The exam pass mark is 81% (26 out of 32). The exam lasts for 35 minutes and must be completed within this time under exam conditions. Delegates are permitted to use the Construction site safety - The comprehensive guide (GE700) publication and the Construction site management delegate workbook (XA6) for the last 15 minutes of the exam.

Length of Course
This is a five-day course. Delegates are required to complete the full course (37.5 hours) to be eligible for certification.

The course covers relevant health, safety and environmental legislation affecting safe working in the building, construction and civil engineering industries. It highlights the need for risk assessment in the workplace, the implementation of the necessary control measures, and adequate communication to sustain a health and safety culture among the workforce. 

The SMSTS course is endorsed by Build UK as the standard training for all construction managers.

Course Details
Overview of the CITB SMSTS Course
The CITB Site Managers Safety Training Scheme course is designed for site managers, or aspiring site managers. It is designed for those with responsibility for managing, monitoring, implementing and reporting in a construction environment. Assessment
To successfully achieve the course, delegates must:
Complete all four core exercises
Pass the trainer review and
Pass the end of course exam The trainer review provides a pass/fail based on the delegate's performance and engagement in the core exercises and engagement in the course overall. Details of this are provided in XA6T. The paper consists of 25 questions, selected by CITB, covering all aspects of the course. The exam must be taken at the end of the course. Each
Exam paper has:
18 multiple choice questions (each worth one mark)
7 questions in multi-response or short written answer format (each worth two marks) The exam pass mark is 81% (26 out of 32). The exam lasts for 35 minutes and must be completed within this time under exam conditions. Delegates are permitted to use the Construction site safety - The comprehensive guide (GE700) publication and the Construction site management delegate workbook (XA6) for the last 15 minutes of the exam. Length of Course
This is a five-day course. Delegates are required to complete the full course (37.5 hours) to be eligible for certification. The course covers relevant health, safety and environmental legislation affecting safe working in the building, construction and civil engineering industries. It highlights the need for risk assessment in the workplace, the implementation of the necessary control measures, and adequate communication to sustain a health and safety culture among the workforce. The SMSTS course is endorsed by Build UK as the standard training for all construction managers. 

Construction Design & Management (CDM)

This course covers all relevant legislation affecting safe working in the building, construction...

CITB SMSTS (5 Days) (On-Site)

<h2>Course Details</h2>This highly-regarded course gives team leaders, supervisors and managers, the training they need to manage health and safety effectively. Delegates will learn about safety and risk management in the workplace. This course is created for up to 16 delegates.

ð Course content
Introduction and overview of the Health and Safety Law
Responsibilities of Supervisors and Managers
Assessing risks - definitions, factors to consider when carrying out a risk assessment
Risk control selection and the best methods to choose, including consideration of 'reasonably
practicable'

Course Details
This highly-regarded course gives team leaders, supervisors and managers, the training they need to manage health and safety effectively. Delegates will learn about safety and risk management in the workplace. This course is created for up to 16 delegates. ð Course content
Introduction and overview of the Health and Safety Law
Responsibilities of Supervisors and Managers
Assessing risks - definitions, factors to consider when carrying out a risk assessment
Risk control selection and the best methods to choose, including consideration of 'reasonably
practicable'

Occupational Health & Safety

Workplace Health & Safety

Health & Safety

IOSH

This highly-regarded course gives team leaders, supervisors and managers, the training they need...

IOSH Managing Safely (On Site - 3 Days)

<h2>Course Details</h2>This course concentrates on the legal requirements for risk assessments in the organisation and the assessments and practical application. This course will give delegates the ability to carry out suitable and sufficient risk assessments.

ð Course Contents
Health and safety legislation
The management of health and safety at work regulations
Workplace accidents (causation)
The risk assessments process, understanding the key steps
Undertaking a practical risk assessment
Half day

Course Details
This course concentrates on the legal requirements for risk assessments in the organisation and the assessments and practical application. This course will give delegates the ability to carry out suitable and sufficient risk assessments. ð Course Contents
Health and safety legislation
The management of health and safety at work regulations
Workplace accidents (causation)
The risk assessments process, understanding the key steps
Undertaking a practical risk assessment
Half day

Fire Risk Assessment

Risk Assessment

Health & Safety At Work

This course concentrates on the legal requirements for risk assessments in the organisation and...

Risk Assess. & Method Statement On-Site

<h2>Course Details</h2>Overview of the CITB SSSTS Course
The CITB Site supervision safety training scheme (SSSTS) course is designed for those who have, or are about to acquire, supervisory responsibilities. The course covers all relevant legislation and other aspects which affect safe working in the building, construction and civil engineering industries. It highlights the need for risk assessment in the workplace, the implementation of the necessary control measures, and adequate communication to sustain a health and safety culture among the workforce. 

Entry requirements
Delegates should hold, or be about to hold, the role of a supervisor. Delegates must be competent in English at site supervisor level. 

Assessment
Assessment will be by an end of course examination and the trainer review. 

The examination paper is compulsory and consists of 25 questions, selected by CITB, covering all aspects of the course. The examination pass mark is 80% (24 out of 30). The paper consists of 22 multiple choice questions and three short written questions. There are four safety critical questions in each exam paper. The delegate must answer all four of these questions correctly to pass the exam. The multiple-choice questions are worth 1 point each, whereas written questions can score between 1-3 marks. 

Delegates will need to pass all three elements of the trainer review to gain a pass. 
The three elements of the trainer review are as follows: 
Exercise - overall, thinking about the delegate's performance in the group exercise, did they work well as part of the team?
Has the delegate actively engaged with the course and the group? 
Has the learner completed the toolbox talk?
All three elements will be either a pass (yes) or fail (no) and all three elements will need to achieve a pass for the delegate to pass this element of the course. 

Length of Course
This is a two-day course. Delegates are required to complete the full course (15 hours) to be eligible for certification. 

A natural progression from this course would be to attend the Site Management Safety Training Scheme (SMSTS) course. 

The SSSTS course is endorsed by Build UK and exceeds the standard set by CITB for construction supervisors training.

Course Details
Overview of the CITB SSSTS Course
The CITB Site supervision safety training scheme (SSSTS) course is designed for those who have, or are about to acquire, supervisory responsibilities. The course covers all relevant legislation and other aspects which affect safe working in the building, construction and civil engineering industries. It highlights the need for risk assessment in the workplace, the implementation of the necessary control measures, and adequate communication to sustain a health and safety culture among the workforce. Entry requirements
Delegates should hold, or be about to hold, the role of a supervisor. Delegates must be competent in English at site supervisor level. Assessment
Assessment will be by an end of course examination and the trainer review. The examination paper is compulsory and consists of 25 questions, selected by CITB, covering all aspects of the course. The examination pass mark is 80% (24 out of 30). The paper consists of 22 multiple choice questions and three short written questions. There are four safety critical questions in each exam paper. The delegate must answer all four of these questions correctly to pass the exam. The multiple-choice questions are worth 1 point each, whereas written questions can score between 1-3 marks. Delegates will need to pass all three elements of the trainer review to gain a pass. The three elements of the trainer review are as follows: Exercise - overall, thinking about the delegate's performance in the group exercise, did they work well as part of the team?
Has the delegate actively engaged with the course and the group? Has the learner completed the toolbox talk?
All three elements will be either a pass (yes) or fail (no) and all three elements will need to achieve a pass for the delegate to pass this element of the course. Length of Course
This is a two-day course. Delegates are required to complete the full course (15 hours) to be eligible for certification. A natural progression from this course would be to attend the Site Management Safety Training Scheme (SMSTS) course. The SSSTS course is endorsed by Build UK and exceeds the standard set by CITB for construction supervisors training. 

Scaffolding Supervisor

This course provides a basic understanding of health & safety duties and responsibilities...

CITB SSSTS (2 Days) (On-Site)

<h2>Course Details</h2>Overview of the CITB SSSTS-R Course
This refresher course is for delegates who have previously passed the two-day Site supervision safety training scheme (SSSTS) course and can provide proof of successful attendance. 

Entry requirements
The refresher course is only for delegates who have previously passed the two-day Site supervision safety training scheme (SSSTS) course and can provide proof of successful attendance.

Assessment
Assessment will be by an exam paper at the end of the course. 

The examination paper is compulsory and consists of 25 questions, selected by CITB, covering all aspects of the course. The examination pass mark is 80% (24 out of 30). The paper consists of 22 multiple choice questions and three short written questions. There are four safety critical questions in each exam paper. The delegate must answer all four of these questions correctly to pass the exam. The multiple choice questions are worth 1 point each, whereas written questions can score between 1-3 marks. 

The exam paper forms the basis of assessment of whether or not a delegate has successfully achieved a satisfactory level of understanding to be awarded the Site supervision safety training scheme refresher (SSSTS-R) certificate. The examination lasts for 30 minutes and must be completed within this time. Delegates are permitted to use the Construction site supervision (GE706) publication for the last ten minutes of the examination period. 

Length of Course
This is a one-day course. Delegates are required to complete the full course (7.5 hours). 

It aims to bring health and safety knowledge up-to-date, as well as giving a thorough overview of the legislative changes and their impact in the workplace. The course includes a wide range of topics which have been affected by changes to procedures, and builds upon the material in the original course.

Course Details
Overview of the CITB SSSTS-R Course
This refresher course is for delegates who have previously passed the two-day Site supervision safety training scheme (SSSTS) course and can provide proof of successful attendance. Entry requirements
The refresher course is only for delegates who have previously passed the two-day Site supervision safety training scheme (SSSTS) course and can provide proof of successful attendance. Assessment
Assessment will be by an exam paper at the end of the course. The examination paper is compulsory and consists of 25 questions, selected by CITB, covering all aspects of the course. The examination pass mark is 80% (24 out of 30). The paper consists of 22 multiple choice questions and three short written questions. There are four safety critical questions in each exam paper. The delegate must answer all four of these questions correctly to pass the exam. The multiple choice questions are worth 1 point each, whereas written questions can score between 1-3 marks. The exam paper forms the basis of assessment of whether or not a delegate has successfully achieved a satisfactory level of understanding to be awarded the Site supervision safety training scheme refresher (SSSTS-R) certificate. The examination lasts for 30 minutes and must be completed within this time. Delegates are permitted to use the Construction site supervision (GE706) publication for the last ten minutes of the examination period. Length of Course
This is a one-day course. Delegates are required to complete the full course (7.5 hours). It aims to bring health and safety knowledge up-to-date, as well as giving a thorough overview of the legislative changes and their impact in the workplace. The course includes a wide range of topics which have been affected by changes to procedures, and builds upon the material in the original course. 

SIA Training

Site supervisor safety training scheme refresher (SSSTS-R)

CITB SSSTS Refresher (1 Day) (On-Site)

Southampton

<div style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);"><div style="color: rgb(102, 102, 102); box-sizing: border-box;" fr-original-style=" color: rgb(102, 102, 102);">Give staff the basic skills to understand how and what to train, and to use learner-centred techniques to boost the effectiveness and impact of their training courses. This course includes:<ul fr-original-style="" style="box-sizing: border-box;"><li style="color: rgb(80, 54, 89); box-sizing: border-box;" fr-original-style=" color: rgb(80, 54, 89);">Who are you training?</li><li style="color: rgb(80, 54, 89); box-sizing: border-box;" fr-original-style=" color: rgb(80, 54, 89);">Understanding how people learn</li><li style="color: rgb(80, 54, 89); box-sizing: border-box;" fr-original-style=" color: rgb(80, 54, 89);">Learning and training theories</li><li style="color: rgb(80, 54, 89); box-sizing: border-box;" fr-original-style=" color: rgb(80, 54, 89);">Planning and timing an effective session</li><li style="color: rgb(80, 54, 89); box-sizing: border-box;" fr-original-style=" color: rgb(80, 54, 89);">Eliciting, PoP and concept checking</li><li style="color: rgb(80, 54, 89); box-sizing: border-box;" fr-original-style=" color: rgb(80, 54, 89);">Assessment and evaluation of learning</li></ul></div></div>

Give staff the basic skills to understand how and what to train, and to use learner-centred techniques to boost the effectiveness and impact of their training courses. This course includes:
Who are you training?
Understanding how people learn
Learning and training theories
Planning and timing an effective session
Eliciting, PoP and concept checking
Assessment and evaluation of learning

Sterling Training

Train the Trainer (TTT)

Give staff the basic skills to understand how and what to train, and to use learner-centred techniques to boost the effectiveness and impact of their training courses.

Training Skills for the New Trainer 

Give your staff market-leading delivery skills and intercultural communication techniques with our unique course. TILT has been delivered to military and commercial clients and is seen as best-practice for those training internationally. The course includes:<ul style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);"><li style="color: rgb(80, 54, 89); box-sizing: border-box;" fr-original-style=" color: rgb(80, 54, 89);">Trainer self-awareness</li><li style="color: rgb(80, 54, 89); box-sizing: border-box;" fr-original-style=" color: rgb(80, 54, 89);">Breaking down language and learning barriers</li><li style="color: rgb(80, 54, 89); box-sizing: border-box;" fr-original-style=" color: rgb(80, 54, 89);">Training techniques for the international classroom</li><li style="color: rgb(80, 54, 89); box-sizing: border-box;" fr-original-style=" color: rgb(80, 54, 89);">Effective questioning and concept checking</li><li style="color: rgb(80, 54, 89); box-sizing: border-box;" fr-original-style=" color: rgb(80, 54, 89);">Feedback techniques for international learners</li><li style="color: rgb(80, 54, 89); box-sizing: border-box;" fr-original-style=" color: rgb(80, 54, 89);">Working with interpreters</li><li style="color: rgb(80, 54, 89); box-sizing: border-box;" fr-original-style=" color: rgb(80, 54, 89);">Experiential learning &ndash; a session in a second language</li><li style="color: rgb(80, 54, 89); box-sizing: border-box;" fr-original-style=" color: rgb(80, 54, 89);">Cultural awareness</li></ul><div style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);"></div>

Give your staff market-leading delivery skills and intercultural communication techniques with our unique course. TILT has been delivered to military and commercial clients and is seen as best-practice for those training internationally. The course includes:
Trainer self-awareness
Breaking down language and learning barriers
Training techniques for the international classroom
Effective questioning and concept checking
Feedback techniques for international learners
Working with interpreters
Experiential learning – a session in a second language
Cultural awareness

International Business Management

Give your staff market-leading delivery skills and intercultural communication techniques with our unique course. TILT has been delivered to military and commercial clients and is seen as best-practice for those training internationally.

Training International Learners & Trainees

This driver CPC course - Customer Service &amp; Manual Handling is suitable for LGV &amp; PCV and will cover:Company &amp; Driver Image,&nbsp;Who Customers Are and What They Want,&nbsp;Communication Skills,&nbsp;Giving Good Customer Service,&nbsp;About Manual Handling,&nbsp;The Spine,&nbsp;Manual Handling Injuries and Their Costs,&nbsp;Regulations,&nbsp;Manual Handling Risk Assessment,&nbsp;Safe Handling Techniques,&nbsp;Manual Handling Equipment.All courses start at 07:45 hrs and finish at 15:45 hrsAll courses are 8 hours long with included 2 breaks of 15 minutes and a lunch break of 30 minutes.Approval: This course is registered with JAUPT as approved for Driver CPC qualification.Course Approval Number: CRS18242/475.On completion of the course all attendees will receive certificate of attendance.Please note repeat courses are not accepted by DVSA and by joining this course you confirm that you are aware of the modules covered by you and certify that, if you have covered these before you are happy to repeat the modules due to needing further education on the subject.

This driver CPC course - Rules of the Road & Customer Service is suitable for LGV & PCV and will cover:
Requirements, Speed Limits, SMART Motorways, Highway Code, Road Signs, Bridge Strikes, Mobile Phones, Sat-Navs, Traffic Accident Procedure, Company & Driver Image, Who Customers Are and What They Want, Communication Skills, Giving Good Customer Service.
All courses start at 07:45 hrs and finish at 15:45 hrs
All courses are 8 hours long with included 2 breaks of 15 minutes and a lunch break of 30 minutes.
Approval: This course is registered with JAUPT as approved for Driver CPC qualification.
Course Approval Number: CRS18242/475.
On completion of the course all attendees will receive certificate of attendance.
Please note repeat courses are not accepted by DVSA and by joining this course you confirm that you are aware of the modules covered by you and certify that, if you have covered these before you are happy to repeat the modules due to needing further education on the subject.

PETM

HGV Driver

7.5 Ton Driver

Driver CPC

Rules of the Road & Customer Service - Online

General Admission

Liverpool 

Key Facts:


COURSE 1: PERIPHERAL I.V. CANNULATION COURSE (GPT008)



ONLINE STUDY - In your own time (approx. 5-6 hours study time) +
CLASSROOM SESSION - Morning, Afternoon or Evening session (approx. 3 hours)



Awarding Body: Open College Network (OCN) Credit for Learning
Award Level: Level 3 (Advanced Level) - Ireland Level 5
CPD Certified: Yes (CPD Accreditation)
Minimum Age: 18 (16 with parental consent)
Entry requirements: None. (English Level 2 desirable)
Training Locations: Study online + Classroom
 
OCN Accredited at UK Level 3 (Ireland Level 5)

 
PART 1 - Theory: Complete this part of your course online at home or work in your own time (stop and start learning when it suits you). Can be completed on multiple devices - smart phones, kindle, laptop, tablet etc.

PART 2 - Skills and Practical Development:
Safely and competently set up and maintain a Peripheral IV Infusion.


Attend a classroom location to complete your practical training.

 
Course Itinerary:
PART 1 - THEORY (ONLINE)
M1 - Peripheral IV Cannulation - Introduction:
Definitions - understanding terminology relating to PIVC.
IV Therapy and NMC guidelines.
M2 - Legal & Professional Responsibilities:
Legal Obligations and Accountability. Criminal, Civil and
Contractual law in Healthcare. Vicarious Liability and your
Duty of Care.
M3 - Anatomy & Physiology:
Sites appropriate to IV cannulation. Hand vs. arm.
Advantages and disadvantages of relevant veins.
An overview of Homeostasis and Fluid Balance.
M4 - Hygiene and Infection Prevention & Control (IPC):
Reducing healthcare-associated infections. Keeping Safe.
Bloodborne Pathogens and Work Practice Controls.
Standard Precautions. Waste Disposal. Needle-stick injuries.
M5 - Indications and Advantages:
When to cannulate, infusion types and benefits over
alternative infusion routes. Continuous and intermittent infusion.
Prophylactic use before procedures and in unstable patients.
Contraindications.
M6 - Equipment:
Cannula types, sizes and colour coding. How to select
appropriate size. Equipment overview for total procedure.
M7 - Vein Choice for Cannulation:
Correct vein selection. Which veins to avoid.
How to manage an unsuccessful cannulation.
M8 - Procedures:
Full procedure for cannulation including correct documentation.
M8: Guide to Cannulation - revision
M8: Video - Recap with full procedure
M9 - Contraindications:
When inappropriate to cannulate including patients with specific health conditions.
M10 - Complications:
A detailed look at potential complications during and after
cannulation, including phlebitis, infections, petechiae and haematomas. Clinical signs and corrective actions.

PLEASE NOTE THAT PART 1 SHOULD BE COMPLETED
BEFORE JOINING US FOR YOUR PRACTICAL TRAINING

PART 2 (CLASSROOM:
1 - Welcome, introductions and overview:
Classroom - registration and introductions.
Virtual Classroom - audio/visual checks and registration.
2 - Legal & Professional Responsibilities:
Overview and discussion.
3 - Anatomy - key points (appropriate to PIVC):
Arteries and veins. Selecting an approprate site. Sites to avoid and “first choice” sites.
4 - Cannulae - selection and types:
A detailed look at different types of cannulas, respective benefits and attributes. Selectinng an appropriate pVAD.
5 - Complications:
Complications of pVAD insertion including examples of
infiltration, haematoma, extravasation and transfixation.
6 - VIP Score:
Understanding and using the Visual Infusion Phlebitis score.
7 - Equipment - overview:
We take a look at all essential equipment required for PIVC.
8 - PRACTICAL SESSIONS:
Multiple practical sessions throughout the session.
9 - Fluids:
The importance of understanding fluids. Includes detailed overview of: maintenance fluids, Hartmann’s solution, Colloids (and risks), blood products.
10 - Infusion Rates:
Calculating infusion rates and drops per minute.

This course is supported with downloadable resources and may include extra video segments to reinforce your practical training.
 
(THE COURSE DELIVERY AWARDS SAME NATIONALLY RECOGNISED AND DUALLY ACCREDITED QUALIFICATION AS OUR VIRTUAL CLASSROOM COURSE VERSION)
Please make sure you verify the precise dates and timings of your course when you receive your booking confirmation, as it may vary from the information provided above.





Key Facts:


COURSE 2: VACCINATION / INJECTION COURSE (GPT601)



ONLINE STUDY - In your own time (approx. 5-6 hours study time) +
CLASSROOM SESSION - Morning, Afternoon or Evening session (approx. 3 hours)


Awarding Body: Open College Network (OCN) Credit for Learning
Award Level: Level 4 (FDSc Level) - Ireland Level 6
CPD Certified: Yes (CPD Accreditation)
Minimum Age: 18 (16 with parental consent)
Entry requirements: None. (English Level 2 desirable)
Training Locations: Study online + Classroom
 
OCN Accredited at UK Level 4 (Ireland Level 6)



SUITABLE FOR:
- MEDICAL / HEALTHCARE (trainees and professionals)
- AESTHETIC THERAPISTS (all levels)

 
This Vaccination / Injection Course is a nurse or paramedic-led half-day session covering all essential theory and practical skill-sets required to deliver effective Intramuscular, Intradermal and Subcutaneous injections / vaccinations.
 
PART 1 - THEORY (online)
Delegates will fully understand the theory and will be able to demonstrate they can identify the correct patient, gain consent and safely administer a vaccine or injection, conforming to WHO and Skills for Health recommended standards.
 
Itinerary:
M01 Course Overview and brief history
M02 Infection Protection Control
M03 Professionalism and Effective Communication
M04 Understanding injection procedures
M05 Why do we vaccinate?
M06 The immune system and how vaccines work. Vaccine types and composition.
M07 The National Vaccine Policy & Schedule
M08 Vaccine preventable diseases
M08A – Covid-19 Update
M09 Vaccines - understanding the reconstitution process
M10 Storage and Handling – understanding correct procedures and protocols
M11 Equipment – Syringes and Syringe Types, Needles and Needle Types, SDV (Single-Dose Vials), MDV (Multi-Dose Vials), Pre-Filled Syringes, Gloves and PPE.
M12 Vaccination sites, techniques and anatomical site selection
i) Intramuscular (IM) Injection
ii) Subcutaneous (SubCut) Injection
iii) Intradermal (ID) Injection
M13 Legal requirements, Consent and Standard Operating Procedures
M14 Adverse Reactions and Basic Life Support Guidance
M15 Record keeping & Documentation
 
PLEASE NOTE THAT PART 1 SHOULD BE COMPLETED
BEFORE JOINING US FOR YOUR PRACTICAL TRAINING
PART 2 - CLASSROOM (am, pm or evening sessions)
3 - 4 hours skill-set development with practical demonstrations and hands-on experience performing Intramuscular, Intradermal and Subcutaneous Injections.
 


How do I attend?

EITHER -
CLASSROOM OPTION - Complete your theory training online at home or work, then attend one of our scheduled classroom locations, completing your Peripheral IV Cannulation Course and your Injection Course on the same day.
Our Peripheral IV Cannulation Course and Injection Course training kits are supplied at no charge when booking our virtual classroom training option.
If you would like to add one or both of these kits to your classroom training option then these are available for you to add at time of booking. Training kits mirror the same equipment and supplies used in the classroom and both include detailed video instructions, allowing you to continue to practice and "hone" your skills after you have completed your practical training.

OR -

VIRTUAL CLASSROOM OPTION- Complete your theory training online at home or work, then join us for your one full day to complete your cannulation and injection course training.

Our Virtual Classroom option includes two very comprehensive training kits - one for your cannulation course and one for your injection course. Kits are included at no charge (normally £79.95 and £39.95 respectively) and are yours to keep and to continue to practice with after you have finished your courses. The equipment and supplies included in your kits are the same as those used if you choose the classroom option.

How do I book?

Choose whether you would like to attend in a classroom or if you would like to complete your training by virtual classroom.
Click on the Classroom - Booking Options or Virtual Classroom - Booking Options buttons below to see all upcoming dates and locations.

Additional Courses suitable for Aesthetic Therapists:
Our popular Introduction to Phlebotomy Course also trains you to perform venepuncture at Advanced Level. We offer both classroom and virtual classroom options for this course and a comprehensive Practise@Home Training Kit is provided for our virtual classroom option. Both options are accredited at Advanced Level.
If you already have phlebotomy skills (or decide to enroll on our phlebotomy training course) then you will be able to offer your clients Platelet-Rich Plasma (PRP) Treatments, also known as Vampire Facials. Our PRP (Vampire Facials) Course trains you in the harvesting, preparation and treatment of PRP for application to your clients as required. We offer both classroom and virtual classroom options for this course and a comprehensive Practise@Home Training Kit is provided for our virtual classroom option. Both options are accredited at Foundation Degree Level.

If you would like to "mix and match" your training dates and/or locations or would like to build your own package of courses then please call our admin team on 01525 713377 who will be more than happy to put a training package together for you on dates and / or locations that suit you.

All courses are dually accredited and are Skills for Health & WHO compliant.

Geopace Training

Medical Aesthetics

Allied Health

Platelet-rich plasma (PRP)

Intravenous Cannulation

Aesthetic Practitioner

Facial Aesthetics

THIS COURSE PACKAGE INCLUDES:
1: PERIPHERAL I.V. CANNULATION - IV THERAPIES COURSE (GPT008)
2: VACCINATION / INJECTION COURSE (GPT601)

Learn how to administer injectables and intravenous therapies ...

FAST-TRACK YOUR AESTHETICS TRAINING

WITH OUR

COMPLETE TRAINING PACKAGE

20% Multi-Course Discount

    Cover all stages from Level 1 through to Level 4 (FDSc)

    Cover your theory training online

    Complete your advanced practical training in 1 day

    Practical training in Classroom or Virtual Classroom

    Comprehensive Practise@Home training kits for VC

    Awards 2 accredited qualifications

    Dual Accreditations for all courses

    Covers all steps required to safely perform injectables

    Covers all steps required to safely perform IV therapies

    Practise IV on artificial arm with fake blood

    Practise injection techniques on realistic injection pads

    Learn beginner to advanced skills and techniques

    Basic understanding of English language required

    OPEN TO ALL APPLICANTS


Aesthetic Therapy Training - Beginner to Advanced PACKAGE

Glasgow

Belfast

<div style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);">This qualification is aimed at learners who wish to work in an unsupervised capacity; planning, instructing and evaluating a safe and effective Pilates session. Qualification Structure:Unit 1: Providing a positive customer experience in the exercise environmentUnit 2: Lifestyle Management and Health AwarenessUnit 3: Applied Anatomy and PhysiologyUnit 4: Principles of Planning and Delivering Group ExerciseUnit 5: Principles and Fundamentals of PilatesUnit 6: Plan and deliver a Pilates Session<div fr-original-style="" style="box-sizing: border-box;"> </div><div fr-original-style="" style="box-sizing: border-box;">Entry Requirements:</div><div fr-original-style="" style="box-sizing: border-box;">Learners need to be 16 or above to complete this qualification. YMCA Awards recommend learners&nbsp;have a basic understanding of anatomy and physiology. </div><div fr-original-style="" style="box-sizing: border-box;"> </div><div id="isPasted" fr-original-style="" style="box-sizing: border-box;">Assessments:</div>Learner Assessment RecordAssessment WorkbookMultiple Choice Theory paper (external)Practical examinationPortfolio of evidence</div><div style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);"> </div>

This qualification is aimed at learners who wish to work in an unsupervised capacity; planning, instructing and evaluating a safe and effective Pilates session.

Qualification Structure:
Unit 1: Providing a positive customer experience in the exercise environment
Unit 2: Lifestyle Management and Health Awareness
Unit 3: Applied Anatomy and Physiology
Unit 4: Principles of Planning and Delivering Group Exercise
Unit 5: Principles and Fundamentals of Pilates
Unit 6: Plan and deliver a Pilates Session
Entry Requirements:Learners need to be 16 or above to complete this qualification. YMCA Awards recommend learners have a basic understanding of anatomy and physiology.

Assessments:
Learner Assessment Record
Assessment Workbook
Multiple Choice Theory paper (external)
Practical examination
Portfolio of evidence

Platinum Training Institute

Pilates

This qualification is aimed at learners who wish to work in an unsupervised capacity; planning, instructing and evaluating a safe and effective Pilates session.

YMCA Level 3 Diploma in Teaching Pilates

Newport

Milton Keynes 

<div data-testid="richTextElement" style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);">ONLINE STUDY - In your own time (approx. 6 hours study time) +CLASSROOM SESSION - Morning, Afternoon or Evening session (approx. 3 hours) Awarding Body:&nbsp;Open College Network (OCN) Credit for LearningAward Level:&nbsp;Level 3 (Advanced Level) - Ireland Level 5CPD Certified:&nbsp;Yes (CPD Accreditation)Minimum Age:&nbsp;18 (16 with parental consent)Entry requirements:&nbsp;None. (English Level 2 desirable)Training Locations:&nbsp;Study online + Classroom&nbsp;OCN Accredited at UK Level 3 (Ireland Level 5) &nbsp;PART 1 - Theory:&nbsp;Complete this part of your course online at home or work in your own time (stop and start learning when it suits you). Can be completed on multiple devices - smart phones, kindle, laptop, tablet etc. PART 2 - Skills and Practical Development: Safely and competently set up and maintain a Peripheral IV Infusion. Attend a classroom location to complete your practical training. <div style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);"> Please make sure you verify the precise dates and timings of your course when you receive your booking confirmation, as it may vary from the information provided above. </div><div style="color: rgb(85, 85, 85); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);">Course Itinerary:</div><div style="color: rgb(85, 85, 85); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"> </div>PART 1 - THEORY (ONLINE) M1 - Peripheral IV Cannulation - Introduction: Definitions - understanding terminology relating to PIVC. IV Therapy and NMC guidelines. M2 - Legal &amp; Professional Responsibilities: Legal Obligations and Accountability. Criminal, Civil and Contractual law in Healthcare. Vicarious Liability and your Duty of Care. M3 - Anatomy &amp; Physiology: Sites appropriate to IV cannulation. Hand vs. arm. Advantages and disadvantages of relevant veins. An overview of Homeostasis and Fluid Balance. M4 - Hygiene and Infection Prevention &amp; Control (IPC): Reducing healthcare-associated infections. Keeping Safe. Bloodborne Pathogens and Work Practice Controls. Standard Precautions. Waste Disposal. Needle-stick injuries. M5 - Indications and Advantages: When to cannulate, infusion types and benefits over alternative infusion routes. Continuous and intermittent infusion. Prophylactic use before procedures and in unstable patients. Contraindications. M6 - Equipment: Cannula types, sizes and colour coding. How to select appropriate size. Equipment overview for total procedure. M7 - Vein Choice for Cannulation: Correct vein selection. Which veins to avoid. How to manage an unsuccessful cannulation. M8 - Procedures: Full procedure for cannulation including correct documentation. M8: Guide to Cannulation - revision M8: Video - Recap with full procedure M9 - Contraindications: When inappropriate to cannulate including patients with specific health conditions. M10 - Complications: A detailed look at potential complications during and after cannulation, including phlebitis, infections, petechiae and haematomas. Clinical signs and corrective actions. PLEASE NOTE THAT PART 1 SHOULD BE COMPLETED BEFORE JOINING US FOR YOUR PRACTICAL TRAINING PART 2 (CLASSROOM: 1 - Welcome, introductions and overview: Classroom - registration and introductions. Virtual Classroom - audio/visual checks and registration. 2 - Legal &amp; Professional Responsibilities: Overview and discussion. 3 - Anatomy - key points (appropriate to PIVC): Arteries and veins. Selecting an approprate site. Sites to avoid and &ldquo;first choice&rdquo; sites. 4 - Cannulae - selection and types: A detailed look at different types of cannulas, respective benefits and attributes. Selectinng an appropriate pVAD. 5 - Complications: Complications of pVAD insertion including examples of infiltration, haematoma, extravasation and transfixation. 6 - VIP Score: Understanding and using the Visual Infusion Phlebitis score. 7 - Equipment - overview: We take a look at all essential equipment required for PIVC. 8 - PRACTICAL SESSIONS: Multiple practical sessions throughout the session. 9 - Fluids: The importance of understanding fluids. Includes detailed overview of: maintenance fluids, Hartmann&rsquo;s solution, Colloids (and risks), blood products. 10 - Infusion Rates: Calculating infusion rates and drops per minute. This course is supported with downloadable resources and may include extra video segments to reinforce your practical training.&nbsp;<div style="color: rgb(85, 85, 85); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);">(THE COURSE DELIVERY AWARDS SAME NATIONALLY RECOGNISED AND DUALLY ACCREDITED QUALIFICATION AS OUR VIRTUAL CLASSROOM COURSE VERSION)</div></div>

ONLINE STUDY - In your own time (approx. 6 hours study time) +
CLASSROOM SESSION - Morning, Afternoon or Evening session (approx. 3 hours)



Awarding Body: Open College Network (OCN) Credit for Learning
Award Level: Level 3 (Advanced Level) - Ireland Level 5
CPD Certified: Yes (CPD Accreditation)
Minimum Age: 18 (16 with parental consent)
Entry requirements: None. (English Level 2 desirable)
Training Locations: Study online + Classroom
 
OCN Accredited at UK Level 3 (Ireland Level 5)

 
PART 1 - Theory: Complete this part of your course online at home or work in your own time (stop and start learning when it suits you). Can be completed on multiple devices - smart phones, kindle, laptop, tablet etc.

PART 2 - Skills and Practical Development:
Safely and competently set up and maintain a Peripheral IV Infusion.


Attend a classroom location to complete your practical training.


Please make sure you verify the precise dates and timings of your course when you receive your booking confirmation, as it may vary from the information provided above.


Course Itinerary:
PART 1 - THEORY (ONLINE)
M1 - Peripheral IV Cannulation - Introduction:
Definitions - understanding terminology relating to PIVC.
IV Therapy and NMC guidelines.
M2 - Legal & Professional Responsibilities:
Legal Obligations and Accountability. Criminal, Civil and
Contractual law in Healthcare. Vicarious Liability and your
Duty of Care.
M3 - Anatomy & Physiology:
Sites appropriate to IV cannulation. Hand vs. arm.
Advantages and disadvantages of relevant veins.
An overview of Homeostasis and Fluid Balance.
M4 - Hygiene and Infection Prevention & Control (IPC):
Reducing healthcare-associated infections. Keeping Safe.
Bloodborne Pathogens and Work Practice Controls.
Standard Precautions. Waste Disposal. Needle-stick injuries.
M5 - Indications and Advantages:
When to cannulate, infusion types and benefits over
alternative infusion routes. Continuous and intermittent infusion.
Prophylactic use before procedures and in unstable patients.
Contraindications.
M6 - Equipment:
Cannula types, sizes and colour coding. How to select
appropriate size. Equipment overview for total procedure.
M7 - Vein Choice for Cannulation:
Correct vein selection. Which veins to avoid.
How to manage an unsuccessful cannulation.
M8 - Procedures:
Full procedure for cannulation including correct documentation.
M8: Guide to Cannulation - revision
M8: Video - Recap with full procedure
M9 - Contraindications:
When inappropriate to cannulate including patients with specific health conditions.
M10 - Complications:
A detailed look at potential complications during and after
cannulation, including phlebitis, infections, petechiae and haematomas. Clinical signs and corrective actions.

PLEASE NOTE THAT PART 1 SHOULD BE COMPLETED
BEFORE JOINING US FOR YOUR PRACTICAL TRAINING

PART 2 (CLASSROOM:
1 - Welcome, introductions and overview:
Classroom - registration and introductions.
Virtual Classroom - audio/visual checks and registration.
2 - Legal & Professional Responsibilities:
Overview and discussion.
3 - Anatomy - key points (appropriate to PIVC):
Arteries and veins. Selecting an approprate site. Sites to avoid and “first choice” sites.
4 - Cannulae - selection and types:
A detailed look at different types of cannulas, respective benefits and attributes. Selectinng an appropriate pVAD.
5 - Complications:
Complications of pVAD insertion including examples of
infiltration, haematoma, extravasation and transfixation.
6 - VIP Score:
Understanding and using the Visual Infusion Phlebitis score.
7 - Equipment - overview:
We take a look at all essential equipment required for PIVC.
8 - PRACTICAL SESSIONS:
Multiple practical sessions throughout the session.
9 - Fluids:
The importance of understanding fluids. Includes detailed overview of: maintenance fluids, Hartmann’s solution, Colloids (and risks), blood products.
10 - Infusion Rates:
Calculating infusion rates and drops per minute.

This course is supported with downloadable resources and may include extra video segments to reinforce your practical training.
 
(THE COURSE DELIVERY AWARDS SAME NATIONALLY RECOGNISED AND DUALLY ACCREDITED QUALIFICATION AS OUR VIRTUAL CLASSROOM COURSE VERSION)



Allied Health Professions (AHP)

Aesthetics

Medicine & Nursing

Venepuncture & Cannulation

Learn how to cannulate ...

    Nationally Recognised Qualification

    OCN Accredited - Level 3 (advanced) - Ireland Level 5

    CPD Accredited - The CPD Certification Service

    Classroom or Virtual Classroom options

    Covers all steps for cannulating in arm or hand

    Practise on artificial arms and fake blood!

    Essential qualification for all IV therapies

    Phlebotomy training desirable but not essential

    Basic understanding of English language required

    OPEN TO ALL APPLICANTS


Peripheral I.V. Cannulation Course (GPT008)

<div data-testid="richTextElement" id="isPasted" fr-original-style="" style="box-sizing: border-box;"><h2 fr-original-style="" style="box-sizing: border-box;">INTRAMUSCULAR, INTRADERMAL &amp; SUBCUTANEOUS INJECTION COURSE (GPT601) CLASSROOM or VIRTUAL CLASSROOM (with online theory)</h2></div><section fr-original-style="" style="box-sizing: border-box;"><div data-hook="bgLayers" data-motion-part="BG_LAYER" fr-original-style="" style="box-sizing: border-box;"><div data-testid="colorUnderlay" fr-original-style="" style="box-sizing: border-box;"></div><div data-motion-part="BG_MEDIA" fr-original-style="" style="box-sizing: border-box;"></div></div><div data-testid="columns" fr-original-style="" style="box-sizing: border-box;"><div data-hook="bgLayers" data-motion-part="BG_LAYER" fr-original-style="" style="box-sizing: border-box;"><div data-testid="colorUnderlay" fr-original-style="" style="box-sizing: border-box;"></div><div data-motion-part="BG_MEDIA" fr-original-style="" style="box-sizing: border-box;"></div></div><div data-mesh-id="comp-kl8214n52inlineContent" data-testid="inline-content" fr-original-style="" style="box-sizing: border-box;"><div data-mesh-id="comp-kl8214n52inlineContent-gridContainer" data-testid="mesh-container-content" fr-original-style="" style="box-sizing: border-box;"><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;">Learn how to administer vaccines or injections ...&nbsp;</div><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;"><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Nationally Recognised Qualification</li><li fr-original-style="" style="box-sizing: border-box;">Includes IM, ID and Sub-Cut Injection methods</li><li fr-original-style="" style="box-sizing: border-box;">OCN Accredited - Level 4 (Foundation Degree - FDSc)</li><li fr-original-style="" style="box-sizing: border-box;">Covers all steps to safely perform a vaccination</li><li fr-original-style="" style="box-sizing: border-box;">Use same techniques and skills for aesthetic therapies</li><li fr-original-style="" style="box-sizing: border-box;">Includes B12, Vitamin C and other treatments</li><li fr-original-style="" style="box-sizing: border-box;">Essential qualification for all injections</li><li fr-original-style="" style="box-sizing: border-box;">Basic understanding of English language required</li><li fr-original-style="" style="box-sizing: border-box;">OPEN TO ALL APPLICANTS</li></ul><div data-testid="richTextElement" id="isPasted" fr-original-style="" style="box-sizing: border-box;">About this course</div><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;">Learning Outcomes</div><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;">After the course</div><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;">PART 1 - Theory: complete online at home or work and download a certificate of completionPART 2 - Skills and Practical Development: Attend in the Classroom or Virtual ClassroomVaccination - all essential vaccines including Covid-19, Flu and other annual vaccinesInjections - Aesthetics - B12, Vit C etc.78 UK &amp; Eire training locationsOCN Accredited at Level 4 (FDSc)Medical training standards throughoutSkills for Health &amp; WHO compliantLearning Outcomes<div data-mesh-id="comp-kl8214o43inlineContent" data-testid="inline-content" id="isPasted" fr-original-style="" style="box-sizing: border-box;"><div data-mesh-id="comp-kl8214o43inlineContent-gridContainer" data-testid="mesh-container-content" fr-original-style="" style="box-sizing: border-box;"><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;">Train up to point of first vaccination or injection&nbsp;All theory and practical skills required to perform a safe procedureCovers all essential theory and skill-set development to meet medical standardsUnderstand the procedures used to set up &nbsp;a manage and administer a vaccinePost-injection management and how to avoid critical complicationsCorrect client care and aftercareIncludes legal, consent and documentationAfter the course<div data-mesh-id="comp-kl8214oainlineContent" data-testid="inline-content" id="isPasted" fr-original-style="" style="box-sizing: border-box;"><div data-mesh-id="comp-kl8214oainlineContent-gridContainer" data-testid="mesh-container-content" fr-original-style="" style="box-sizing: border-box;"><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;">Safely and competently administer a vaccine or drug treatment (ie. B12)Correct client management before, during injection and safe after-careUnderstanding equipment types and appropriate choicesUnderstand vaccine management controlAppreciate legal and professional responsibilitiesOffer injection therapies to clients - vitamin supplementsAdminister in hospitals, GP Surgeries and Outreach Centres</div></div></div></div></div></div></div></div></div></div></div></section>

INTRAMUSCULAR, INTRADERMAL & SUBCUTANEOUS INJECTION COURSE (GPT601)
CLASSROOM or VIRTUAL CLASSROOM (with online theory)
Learn how to administer vaccines or injections ... 
Nationally Recognised Qualification
Includes IM, ID and Sub-Cut Injection methods
OCN Accredited - Level 4 (Foundation Degree - FDSc)
Covers all steps to safely perform a vaccination
Use same techniques and skills for aesthetic therapies
Includes B12, Vitamin C and other treatments
Essential qualification for all injections
Basic understanding of English language required
OPEN TO ALL APPLICANTS
About this course
Learning Outcomes
After the course
PART 1 - Theory: complete online at
home or work and download a certificate of completion
PART 2 - Skills and Practical Development: Attend in the Classroom or Virtual Classroom
Vaccination - all essential vaccines including Covid-19, Flu and other annual vaccines
Injections - Aesthetics - B12, Vit C etc.
78 UK & Eire training locations
OCN Accredited at Level 4 (FDSc)
Medical training standards throughout
Skills for Health & WHO compliant
Learning Outcomes
Train up to point of first vaccination or injection 
All theory and practical skills required to perform a safe procedure
Covers all essential theory and skill-set development to meet medical standards
Understand the procedures used to set up a manage and administer a vaccine
Post-injection management and how to avoid critical complications
Correct client care and aftercare
Includes legal, consent and documentation
After the course
Safely and competently administer a vaccine or drug treatment (ie. B12)
Correct client management before, during injection and safe after-care
Understanding equipment types and appropriate choices
Understand vaccine management control
Appreciate legal and professional responsibilities
Offer injection therapies to clients - vitamin supplements
Administer in hospitals, GP Surgeries and Outreach Centres

Immunisation & Vaccination

Immunisation

Injection

Vaccination

Vaccinator

Learn how to administer vaccines or injections ...

    Nationally Recognised Qualification

    Includes IM, ID and Sub-Cut Injection methods

    OCN Accredited - Level 4 (Foundation Degree - FDSc)

    Covers all steps to safely perform a vaccination

    Use same techniques and skills for aesthetic therapies

    Includes B12, Vitamin C and other treatments

    Essential qualification for all injections

    Basic understanding of English language required

    OPEN TO ALL APPLICANTS


Vaccination / Injection Course (GPT601)

Targa Rally Webinar: Your Complete Guide to Getting Started
Are you curious about Targa Rallies and eager to dive into the excitement? This engaging webinar is your ultimate introduction to the world of Targa Rallies, designed for newcomers and enthusiasts alike.
What You’ll Learn:
The Basics of Targa Rallies: Discover the essential requirements to get started.
Events & Championships: Explore the wide range of Targa Rallies and championships available across the UK.
Timing & Navigation: Gain a clear understanding of how timing and navigation work in these events.
Special Tests: Learn what special tests are and how to tackle them with confidence.
Delivered by Motorsport UK Coach and Targa Rally Organiser Graham Raeburn, this webinar provides expert insights and practical advice to help you embark on your Targa Rally journey.
Join us to kickstart your rallying adventure!

Rally Navigation Training Services

Motorsport

Discover the world of Targa Rallies! Join our expert-led webinar to learn the basics, explore events and championships, and master timing, navigation, and special tests. Perfect for beginners!

Introduction to Targa Rallies

This official BRCGS course enables participants with an in-depth understanding of the Standard in terms of the protocol, requirements and how to audit effectively. Participants will gain competency to assess compliance to the requirements of the Standard, including fundamental clauses, statements of intent, how to undertake a BRCGS audit, planning of the audit and reporting of the audit. Auditing fundamentals and techniques will be discussed including the auditor competency skills required of auditors auditing against Global Food Safety Initiative (GFSI) recognised certification programmes.Active learning will be used throughout the course utilising case study-based activities to encourage critical thinking and help explain how auditors with audit against the Standard. &nbsp;Participants must have a working knowledge of quality management systems and auditing within the relevant manufacturing sector, and have completed a hazard analysis and critical control points (HACCP) course of at least two days&#39; duration.In preparation for the course, participants must read and review a copy of the Standard including the glossary, which is available as a free download from the <a href="https://www.brcgs.com/store/" target="_blank" rel="noreferrer noopener" style="color: inherit; -webkit-user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: inherit;">BRCGS Store</a>, in addition to the pre-course materials provided.&nbsp;At the end of the course you will be assessed with an exam. Successful completion of this course, including the exam, forms part of the training necessary to become a BRCGS auditor. The steps necessary to complete your training must be arranged with a BRCGS-approved certification body.This course is part of the<a href="http://demo-brcgs.wearesigma.com/training/brcgs-professional/about-the-programme/" style="color: rgb(234, 118, 0); -webkit-user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(234, 118, 0);">&nbsp;BRCGS Professional recognition programme</a>.At the end of the course participants will be able to:&nbsp;<ul style="color: rgb(var(--color_25)); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));"><li fr-original-style="" style="box-sizing: border-box;">Explain the steps to managing an audit programme</li><li fr-original-style="" style="box-sizing: border-box;">Describe auditing fundamentals and techniques</li><li fr-original-style="" style="box-sizing: border-box;">Assess compliance to the requirements of the Standard and explain how compliance can be demonstrated to maintain food safety, quality, legality, and authenticity</li><li fr-original-style="" style="box-sizing: border-box;">Describe the scope of companies and products covered by the Standard</li><li fr-original-style="" style="box-sizing: border-box;">Describe steps to conduct a BRCGS audit including the preparation, planning, and reporting of the audit</li><li fr-original-style="" style="box-sizing: border-box;">Utilise and explain resource tools available for compliance and beneficial support from BRCGS</li></ul>

This official BRCGS course enables participants with an in-depth understanding of the Standard in terms of the protocol, requirements and how to audit effectively. Participants will gain competency to assess compliance to the requirements of the Standard, including fundamental clauses, statements of intent, how to undertake a BRCGS audit, planning of the audit and reporting of the audit. Auditing fundamentals and techniques will be discussed including the auditor competency skills required of auditors auditing against Global Food Safety Initiative (GFSI) recognised certification programmes.
Active learning will be used throughout the course utilising case study-based activities to encourage critical thinking and help explain how auditors with audit against the Standard. Participants must have a working knowledge of quality management systems and auditing within the relevant manufacturing sector, and have completed a hazard analysis and critical control points (HACCP) course of at least two days' duration.
In preparation for the course, participants must read and review a copy of the Standard including the glossary, which is available as a free download from the BRCGS Store, in addition to the pre-course materials provided. 
At the end of the course you will be assessed with an exam. Successful completion of this course, including the exam, forms part of the training necessary to become a BRCGS auditor. The steps necessary to complete your training must be arranged with a BRCGS-approved certification body.
This course is part of theBRCGS Professional recognition programme.
At the end of the course participants will be able to: 
Explain the steps to managing an audit programme
Describe auditing fundamentals and techniques
Assess compliance to the requirements of the Standard and explain how compliance can be demonstrated to maintain food safety, quality, legality, and authenticity
Describe the scope of companies and products covered by the Standard
Describe steps to conduct a BRCGS audit including the preparation, planning, and reporting of the audit
Utilise and explain resource tools available for compliance and beneficial support from BRCGS

Ask Sonia Limited

Food Safety

HACCP

Official BRCGS Food Safety Issue 9 Lead Auditor training course. 
Delivered online (Zoom) by a live BRCGS Approved Training Partner & Virtual Trainer.
Exam and Certificate fee included in the price.

BRCGS Food Safety Issue 9 - Lead Auditor (5 Days)

Broxburn

<h3 style="color: rgb(6, 49, 77); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(6, 49, 77);">Online courses take 5 days and are spread over two weeks.</h3>2024 Dates:&nbsp;October Week 1 - 14th, 15th, 16th / Week 2 - 23rd &amp; 24th&nbsp;2025 Dates:&nbsp;January&nbsp;Week 1 - 13th, 14th 15th /&nbsp;January&nbsp;Week 2 - 20th &amp; 21stApril&nbsp;Week 1 - 22nd, 23rd&nbsp;&amp; 24th / April&nbsp;Week 2 - 29th &amp; 30thEmber Compliance is delighted to offer a new FD&amp;FA BS5839-1 RQF Certified 5-Day Combined Course which encompasses all our FD&amp;FA courses from Introduction to Maintenance complete with RQF Exam at the end of the week.At the end of the 5 days, Learners will attain an RQF Award in the requirements of FD&amp;FA systems for non-domestic buildings BS 5839-1: 2017.As an accredited training provider affiliated with FireQual, recognised by both SQA and Ofqual, our courses are meticulously designed to align with the stringent standards outlined by the BAFE SP203-1 competence scheme.&nbsp;Details of the course are as follows:Module 1: Introduction to BS 5839-1 Learners are introduced to the requirements of BS 5839-1. This module includes basic principles of fire safety and an introduction to FD&amp;FA systems requirements within the boundaries of the various legal frameworks within the UK. Module 2: Design -BS 5839-1 In this module, emphasis is placed on the process of fire alarm design, enquiry, survey, design, certification and the appropriate recording and documentation requirements. Module 3: Installation -BS 5839-1 This module explores compliance with the standard and how the installer may deal with issues not known to the designer during the installation. Module 4: Commissioning - BS 5839-1 This module explores the process of commissioning, the requirements of testing and inspecting a newly installed system and how the commissioner may deal with issues not known to the designer and/or nonconformities with the standard.Module 5: Maintenance - BS 5839-1 This module explores the process of maintenance, the requirements of inspection &amp; servicing existing systems and how the maintainer may deal with non-conformities with the standard.Exam - L3 Award in the Requirements of FD&amp;FA Systems for Non-Domestic Buildings BS 5839-1: 2017 The RQF examination allows learners to demonstrate knowledge of BS 5839-1: 2017 as part of competence in the design, installation, commissioning, and maintenance of FD&amp;FA systems. Learners will demonstrate knowledge gained within our previous modules and industry experience.<div id="isPasted" fr-original-style="" style="box-sizing: border-box;">Notes:</div>Please bring a valid form of identification (such as a driving license or passport). This identification must be shown for verification purposes and recorded by our invigilatorAdditionally, please ensure that you have a non-scientific calculator with you for the exam. Calculators on phones are not permitted.<img src="https://images.cademy.co.uk/88d338d8-7dc4-4054-bf9e-401495774eee/80ddaf3c-277e-490d-aad9-f53db6cf9e22/original.png" style="width: 300px; display: block; vertical-align: top; margin: 5px auto; text-align: center; cursor: auto; padding: 0px 1px; user-select: none; max-width: 100%; position: relative; box-sizing: border-box;" fr-original-style="width: 300px; display: block; vertical-align: top; margin: 5px auto; text-align: center; cursor: auto;" fr-original-class="fr-draggable"><h3 style="color: rgb(6, 49, 77); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(6, 49, 77);">Online courses take 5 days and are spread over two weeks.</h3>October Dates:&nbsp;Week 1 - 14th, 15th, 16th&nbsp;Week 2 - 21st &amp; 22nd

Online courses take 5 days and are spread over two weeks.
2025 Dates: 
January Week 1 - 13th, 14th 15th / January Week 2 - 20th & 21st
April Week 1 - 22nd, 23rd & 24th / April Week 2 - 29th & 30th
July Week 1 - 14th, 15th & 16th / July Week 2 - 21st & 22nd
September Week 1 - 29th, 30th & 1st Oct / October Week 2 - 6th & 7th
Ember Compliance is delighted to offer a new FD&FA BS5839-1 RQF Certified 5-Day Combined Course which encompasses all our FD&FA courses from Introduction to Maintenance complete with RQF Exam at the end of the week.
At the end of the 5 days, Learners will attain an RQF Award in the requirements of FD&FA systems for non-domestic buildings BS 5839-1: 2017.
As an accredited training provider affiliated with FireQual, recognised by both SQA and Ofqual, our courses are meticulously designed to align with the stringent standards outlined by the BAFE SP203-1 competence scheme. 
Details of the course are as follows:
Module 1: Introduction to BS 5839-1
Learners are introduced to the requirements of BS 5839-1. This module includes basic principles of fire safety and an introduction to FD&FA systems requirements within the boundaries of the various legal frameworks within the UK.


Module 2: Design -BS 5839-1
In this module, emphasis is placed on the process of fire alarm design, enquiry, survey, design, certification and the appropriate recording and documentation requirements.


Module 3: Installation -BS 5839-1
This module explores compliance with the standard and how the installer may deal with issues not known to the designer during the installation.


Module 4: Commissioning - BS 5839-1
This module explores the process of commissioning, the requirements of testing and inspecting a newly installed system and how the commissioner may deal with issues not known to the designer and/or nonconformities with the standard.
Module 5: Maintenance - BS 5839-1
This module explores the process of maintenance, the requirements of inspection & servicing existing systems and how the maintainer may deal with non-conformities with the standard.
Exam - L3 Award in the Requirements of FD&FA Systems for Non-Domestic Buildings BS 5839-1: 2017
The RQF examination allows learners to demonstrate knowledge of BS 5839-1: 2017 as part of competence in the design, installation, commissioning, and maintenance of FD&FA systems. Learners will demonstrate knowledge gained within our previous modules and industry experience.
Notes:
Please bring a valid form of identification (such as a driving license or passport). This identification must be shown for verification purposes and recorded by our invigilator
Additionally, please ensure that you have a non-scientific calculator with you for the exam. Calculators on phones are not permitted.

Online courses take 5 days and are spread over two weeks.
October Dates: 
Week 1 - 14th, 15th, 16th 
Week 2 - 21st & 22nd

Ember Compliance

Fire Alarm

Professional Development

Engineer

Continuous Professional Development (CPD)

At the end of the 5 days, Learners will attain an RQF Award in the requirements of FD&FA systems for non-domestic buildings BS 5839-1: 2017.

FD&FA BS5839-1 RQF Certified 5-Day Combined Course - 2 Part Course

This combined HACCP and Food Safety Level 4 course, developed by STC and accredited by the CPD Accreditation Office, will give you a 2 in 1 qualification which is unique. Other training providers only provide these as separate qualifications, however STC has challenged this practice since &ldquo;you can&rsquo;t know HACCP without food safety, and you can&rsquo;t know food safety without HACCP!&rdquo; And at Ask Sonia Ltd, we whole heartedly agree!We are very proud to offer this accredited qualification to those involved with any and all aspects in a food business relating to HACCP &amp; Food Safety.&nbsp;Holders of the qualification will have the knowledge necessary to be an integral part of a food business as well as part of Technical &amp; Quality departments and HACCP team members, team leaders, consultants or trainers. The qualification is also suitable for those working in related industries, such as packaging, storage &amp; distribution.The qualification is also relevant to those owning/managing smaller food businesses to give them the underpinning knowledge to develop a HACCP study and understand the fundamentals of food safety.Attendees should already have knowledge of food safety hazards and controls, as this course will take the attendee through the intermediate levels at the start, and build up to provide the required advanced level of knowledge and understanding by the end of the course.HACCP and food safety training is regarded by the Foods Standards Agency as being important to maintaining good practice in the production of safe food.This course has been accredited by the CPD Accreditation Office for delivery, structure and content.

This combined HACCP and Food Safety Level 4 course, developed by STC and accredited by the CPD Accreditation Office, will give you a 2 in 1 qualification which is unique. Other training providers only provide these as separate qualifications, however STC has challenged this practice since “you can’t know HACCP without food safety, and you can’t know food safety without HACCP!” And at Ask Sonia Ltd, we whole heartedly agree!
We are very proud to offer this accredited qualification to those involved with any and all aspects in a food business relating to HACCP & Food Safety. 
Holders of the qualification will have the knowledge necessary to be an integral part of a food business as well as part of Technical & Quality departments and HACCP team members, team leaders, consultants or trainers. The qualification is also suitable for those working in related industries, such as packaging, storage & distribution.
The qualification is also relevant to those owning/managing smaller food businesses to give them the underpinning knowledge to develop a HACCP study and understand the fundamentals of food safety.
Attendees should already have knowledge of food safety hazards and controls, as this course will take the attendee through the intermediate levels at the start, and build up to provide the required advanced level of knowledge and understanding by the end of the course.
HACCP and food safety training is regarded by the Foods Standards Agency as being important to maintaining good practice in the production of safe food.
This course has been accredited by the CPD Accreditation Office for delivery, structure and content.

CPD accredited Advanced (Level 4) HACCP & Food Safety training course. 
Delivered online (Zoom) by a live tutor.
Exam and Certificate fee included in the price.

CPD Accredited Advanced Combined HACCP & Food Safety Level 4 (5 days)

This official BRCGS course enables participants to develop a full understanding of the general principles of the requirements of the Standard and gain competency to assess compliance to the requirements of the Standard, including fundamental clauses, statements of intent, how to undertake a BRCGS audit, planning of the audit and reporting of the audit.Active learning will be used throughout the course utilising case study-based activities to encourage critical thinking and help explain how auditors will audit against the Standard. &nbsp;Participants must have a working knowledge of quality management systems and auditing within the relevant manufacturing sector, and have completed a hazard analysis and critical control points (HACCP) course of at least two days&#39; duration.In preparation for the course, participants must read and review a copy of the Standard including the glossary, which is available as a free download from the BRCGS Store, in addition to the pre-course materials provided.At the end of the course, participants will be assessed with an exam. For candidates who are already qualified as a Lead Auditor on another scheme (eg IRCA, SQF, IFS, etc) successful completion of this course, including the exam, is recognised as part of the training necessary to become a BRCGS auditor. The steps necessary to complete your training must be arranged with a BRCGS-approved certification body.This course is part of the<a href="http://demo-brcgs.wearesigma.com/training/brcgs-professional/about-the-programme/" style="color: rgb(234, 118, 0); -webkit-user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(234, 118, 0);">&nbsp;BRCGS Professional recognition programme</a>.At the end of the course participants will be able to:&nbsp;<ul style="color: rgb(var(--color_25)); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));"><li fr-original-style="" style="box-sizing: border-box;">Assess compliance to the requirements of the Standard and explain how compliance can be demonstrated to maintain food safety, quality, legality, and authenticity</li><li fr-original-style="" style="box-sizing: border-box;">Describe the scope of companies and products covered by the Standard</li><li fr-original-style="" style="box-sizing: border-box;">Describe steps to conduct a BRCGS audit including the preparation, planning, and reporting of the audit</li><li fr-original-style="" style="box-sizing: border-box;">Utilise and explain resource tools available for compliance and beneficial support from BRCGS</li></ul>

This official BRCGS course enables participants to develop a full understanding of the general principles of the requirements of the Standard and gain competency to assess compliance to the requirements of the Standard, including fundamental clauses, statements of intent, how to undertake a BRCGS audit, planning of the audit and reporting of the audit.
Active learning will be used throughout the course utilising case study-based activities to encourage critical thinking and help explain how auditors will audit against the Standard. Participants must have a working knowledge of quality management systems and auditing within the relevant manufacturing sector, and have completed a hazard analysis and critical control points (HACCP) course of at least two days' duration.
In preparation for the course, participants must read and review a copy of the Standard including the glossary, which is available as a free download from the BRCGS Store, in addition to the pre-course materials provided.
At the end of the course, participants will be assessed with an exam. For candidates who are already qualified as a Lead Auditor on another scheme (eg IRCA, SQF, IFS, etc) successful completion of this course, including the exam, is recognised as part of the training necessary to become a BRCGS auditor. The steps necessary to complete your training must be arranged with a BRCGS-approved certification body.
This course is part of theBRCGS Professional recognition programme.
At the end of the course participants will be able to: 
Assess compliance to the requirements of the Standard and explain how compliance can be demonstrated to maintain food safety, quality, legality, and authenticity
Describe the scope of companies and products covered by the Standard
Describe steps to conduct a BRCGS audit including the preparation, planning, and reporting of the audit
Utilise and explain resource tools available for compliance and beneficial support from BRCGS

Auditor

Official BRCGS Food Safety Issue 9 course. 
Delivered online (Zoom) by a live BRCGS Approved Training Partner.
Exam and Certificate fee included in the price.

2498 Courses in Evesham

CITB Temporary Works Coordinator On-Site

By You Can Do It .Training

CITB SMSTS Refresher (2 Days) (On-Site)

By You Can Do It .Training

Confined Space Awareness (On-Site)

By You Can Do It .Training

CITB SMSTS (5 Days) (On-Site)

By You Can Do It .Training

IOSH Managing Safely (On Site - 3 Days)

By You Can Do It .Training

Risk Assess. & Method Statement On-Site

By You Can Do It .Training

CITB SSSTS (2 Days) (On-Site)

By You Can Do It .Training

CITB SSSTS Refresher (1 Day) (On-Site)

By You Can Do It .Training

Training Skills for the New Trainer

By Sterling Training

Training International Learners & Trainees

By Sterling Training

Search By Location