229 Courses in Bristol

This intensive week of skills practice, feedback and ongoing assessment is the final stage before becoming a fully-qualified human givens practitioner Dates: Mon 6th – Fri 10th Feb 2023Mon 26th – Fri 30th June 2023 Length: 5 days (9.00am – 5.30pm) Tutors: Dr Gareth Hughes, Jo Baker, Rosalind Townsend, Carol Harper Open to: Graduates of Part 2 of the Human Givens Diploma Qualification: Human Givens Practitioner Level Diploma (HG.Dip.P.) This week far exceeded my expectations – I can’t wait to get back and apply what I’ve learntJOHN BUCHANBERGER Part 3 is the Human Givens Practitioner Qualification; the pre-requisite to becoming a fully qualified human givens therapist, eligible for inclusion on the HGI’s Professional Register (which is independently accredited in the UK by the Professional Standards Authority for Health and Social Care). Throughout the week, students practise and demonstrate a broad range of practical therapeutic skills under close supervision and rigorous on-going assessment by the two tutors and experienced facilitators. Students who have already successfully graduated from the course enthuse about how useful and enriching it is. Between Part 2 and Part 3 of the Diploma students are expected to carry out extensive therapeutic practice, with a minimum of 10 different people, under ongoing supervision. For more information, please read the following downloads. Course Dates All Part 3 weeks are held at Engineers’ House in Bristol Winter 2023 – Code WK14 Mon 6th–Fri 10th February 2023 – FULL Summer 2023 – Code WK15 Mon 26th–Fri 30th June 2023 – Full, with waiting list Autumn 2023 – Code WK16 Mon 20th–Fri 24th November 2023 – Waiting list, please contact the office HOW TO APPLY: To attend Part 3, your supervisor must be happy that you have gained enough therapeutic experience and are ready to progress with this part of the Diploma. As there are only 12 places on each Part 3, we recommend you contact us as soon as possible to let us know which course you and your supervisor think you will be most likely to attend. Your name will then be added to the list for that course (for more information on this stage of the Diploma, see: Working towards Part 3). Please contact Fiona Heffernan if you have any questions about the course, or are ready to put your name down for a place on one. Meet your tutors Carol Harper Carol has 30 years’ experience in private practice, her holistic outlook and curiosity has influenced her professional development… Read more Dr Gareth Hughes Gareth is an HG psychotherapist, researcher, nationally recognised expert on university mental health and wellbeing and a Principal Fellow of the Higher Education Academy. Read more Jo Baker For many years Jo worked as a therapist within the Psychological Wellbeing department at the University of Derby, where she dealt with an extensive and varied caseload… Read more Rosalind Townsend Ros Townsend is an experienced psychotherapist and supervisor with busy practices in SW England, where she combines private therapy work with referrals from Occupational Health and the NHS. Read more

Are you a fresher and looking to start your career as a phlebotomist or are you currently employed in the healthcare profession and looking to expand your phlebotomy skills in order to build a rewarding career in this field? Or simply want to understand the blood collection procedure and gather skills to handle and transport specimens securely. This comprehensive phlebotomy course online is ideal for you! Course Highlights You will be given ample opportunity to practise on the manikins Face to Face Practical Training National Occupational Standard for Obtaining Venous Blood Sample Demonstrate appropriate infection control principles when performing training 3 Hours of Remote Theoretical Learning 7 Hours of Face-to-Face Training Sessions at Swindon Centre 7 Hours of Face-to-Face Training Sessions at Bristol Centre 1 Day of Face-to-Face Training Sessions at Birmingham Centre 8 Hours of Face-to-Face Training Sessions at London Centre Once confident at taking blood from the manikin you will have the opportunity to take blood from a fellow participant with consent. Accredited by the CPD Certification Designed by expert healthcare professionals. This extensive course covers the following credentials: Venepuncture process Vial labelling Blood-taking techniques Safety protocols, Needle safety techniques Processing of blood samples Prioritising patients System of needle measurement Maintaining the accuracy of specimen labels Controlling and preventing infection Techniques for preserving clinical proficiency Legal repercussions of bad behaviour Causes of infection and needed records Identify the veins used for Venepuncture (Phlebotomy) Solving issues might arise during the actual operation Classroom-Based Phlebotomy Training Course To ensure effective training, our classroom-based learning is divided into two parts: Remote theoretical learning (online) For the first part of our phlebotomy course online, we provide in-depth theoretical learning which you can complete from the comfort of your home. You can go on to the practical learning portion once the coursework and assessments have been successfully completed. Face-to-face practical learning (designated London-based office, with a similar structure at Swindon, Bristol and Birmingham offices) As part of the practical training, you will receive practical demonstrations and hands-on experience to justify your role. The practical learning part is divided into two learning slots with each weighing 4 hours of time: First 4 hours session: Through practical demonstration using a mannikins, you will be taught how to smoothly draw blood, reduce risks, and control the patient’s reaction. Last 4 hours of sessions: You will then have the chance to draw blood from fellow participants with consent while being closely supervised. Phlebotomy | Online Course | Lead Academy - Trailer Who is this Phlebotomy Training Course for? This phlebotomy course is primarily aimed at: Phlebotomists Health Visitors Physiotherapists Occupational Therapists Healthcare professionals Nurses, midwives, phramcists and doctors Freshers looking to begin their career as a phlebotomist Anyone looking to enhance their blood-sampling skills Whether you are a fresher looking to kickstart your career in the field of phlebotomy or a practicing healthcare looking to enhance your phlebotomy skills, this course will help you achieve your professional aspirations by all means. Entry Requirements There are no academic entry requirements for this online phlebotomy course, and it is open to students of all academic backgrounds. Entry Requirements There are no academic entry requirements for this blood taking course, and it is open to students of all academic backgrounds. However, you are required to have a laptop/desktop/tablet or smartphone and a good internet connection. Assessment Method In this phlebotomy course learners will be assessed through observation. That means during the practical training you will be observed by the supervisor/trainer. Upon successful demonstration of blood sampling and blood draw, you will be awarded a CPD-accredited certificate that is accepted by thousands of professional bodies and government regulators here in the UK and around the world. We also offer face-to-face practical training for Cannulation Training, Catheterisation Training, and Advanced / Competency Phlebotomy Training Course Curriculum Module 1: Introduction Module 2: Steps Before Withdrawing Blood (Venepuncture) Module 3: Basic Anatomy Lessons Module 4: Dos and Donts for Vein Selection Module 5: Preparation for Venepuncture Module 6: Managing Patient’s Expectations Module 7: Complications Issues during Venipuncture Module 8: Processing of Blood Samples Module 9: Conclusion Recognised Accreditation This phlebotomy course is accredited by Continuing Professional Development (CPD). CPD is globally recognised by employers, professional organisations and academic intuitions, thus a certificate from CPD Certification Service creates value towards your professional goal and achievement. CPD-certified certificates are accepted by thousands of professional bodies and government regulators here in the UK and around the world. Many organisations look for employees with CPD requirements, which means, that by doing the phlebotomy course, you would be a potential candidate in your respective field.

This advanced phlebotomy course will allow you to receive practical demonstrations and hands-on training as a part of the practical training to support your role. At the beginning of the session, you will be required to observe the experienced trainers and trained phlebotomists. You will learn how to smoothly draw blood, minimize hazards, and manage the patient’s reaction through a practical demonstration on a mannequin. Finally, under close supervision, you will get the opportunity to collect blood samples from other fellow colleagues.  Course Highlights Gain a Recommendation Letter from Your Supervisor Accredited by the CPD Certification Recognised and Valuable Certification Face-to-Face Practical Training Sessions Supervised by experienced phlebotomists Location & Class Schedule Venue Location Nr. 1: Bank Studio, 23 Park Royal Road, NW10 7JH You can select your preferred date from any of the following months: 7th, 12th, 18th December, 2024 9th, 13th and 21st December, 2024 3rd, 8th and 13th January, 2025 10th, 17th and 21st January, 2025 12th, 19th and 24th January, 2025 20th, 27th January and 3rd February, 2025 9th,16th, 23th February, 2025 11th, 18th, 25th February, 2025 19th, 27th February and 3rd March, 2025 11th, 18th, 22nd March, 2025 13th, 20th, 27th March, 2025 21st March, 28th March, 4th April, 2025 10th, 18th, 25th April, 2025 17th, 24th, 30th April, 2025 21st, 26th April, 1 May, 2025 Venue Location Nr. 2: 83-85 Hagley Road, Birmingham, B16 8QG You can select your preferred date from any of the following months: 1st, 7th and 13th December, 2024 5th, 12th and 19th December, 2024 16th, 23rd and 30th January, 2025 17th, 24th and 31st January, 2025 13th, 20th and 27th February, 2025 14th, 21st and 28th February, 2025 13th, 20th and 27th March, 2025 14th, 21st and 28th March, 2025 10th, 17th, 24th April, 2025 18th, 25th April, 2nd May, 2025 15th, 22nd, 29th May, 2025 15th, 22nd, 29th May, 2025 Venue Location Nr. 3: Pure Offices, Kembrey Park, Swindon, SN2 8BW You can select your preferred date from any of the following months: 30th November, 7th & 14th December 2024 1st, 8th and 15th December, 2024 11th, 18th and 25th January, 2025 8th, 15th, 22nd February, 2025 15th, 22nd, 29th March, 2025 12th, 19th, 26th April, 2025 17th, 24th, 31st May, 2025 Venue Location Nr. 4: Filwood Community Centre, Knowle, Bristol BS4 1JP You can select your preferred date from any of the following months: 15th, 22nd and 28th January, 2025 14th, 21st, 28th March, 2025 16th, 23rd, 30th May, 2025 It can be tough to put your best foot forward in the job market with only online Phlebotomy training. Hence, our practical sessions will provide you with the required experience that your employers might want to see when you apply for the job. This advanced phlebotomy competency training is designed to give you an opportunity to practice, build confidence and gain valuable experience, which will help your professional career when you will apply for the job.  This extensive course covers the following credentials:  Practical demonstration Labelling tubes Blood-taking techniques Code of practice Safety protocols Needle safety techniques Processing of blood samples Prioritising patients Who is this Advanced Phlebotomy Training Course for? This advanced phlebotomy course is primarily aimed at:   Phlebotomists Health Visitors Physiotherapists Occupational Therapists Healthcare professionals Nurses, midwives, pharmacists and doctors Freshers looking to begin their career as a phlebotomist Anyone looking to enhance their blood-sampling skills Whether you are a fresher looking to kickstart your career in the field of phlebotomy or practising healthcare looking to enhance your phlebotomy skills, this course will help you achieve your professional aspirations by all means.   Aims and Learning Outcomes of this Advanced Phlebotomy Training Course  By the end of this advanced phlebotomy course, you will:  Know how to utilise proper safety precautions Assess a phlebotomist’s personal and professional attributes Accept the core roles and obligations of a phlebotomist Understand the code of conduct required to be followed by a phlebotomist Know how to draw blood using the right procedure Establish the process to handle venipuncture-related issues Understand how to handle and preserve blood samples safely Entry Requirements In order to attend the advanced phlebotomy course you need to complete our basic phlebotomy training course. However, it is open to students of all academic backgrounds. Assessment Method As part of the assessment, you will be required to execute a live blood draw and collection that will be closely supervised and marked by the experienced phlebotomist responsible for monitoring you.  Upon successful demonstration of blood sampling, you will be awarded a certificate of competency that is accepted by thousands of professional bodies and government regulators here in the UK and around the world. Recognised Accreditation This course is accredited by Continuing Professional Development (CPD). CPD UK is globally recognised by employers, professional organisations, and academic institutions, thus a certificate from CPD Certification Service creates value towards your professional goal and achievement. CPD certificates are accepted by thousands of professional bodies and government regulators here in the UK and around the world. Many organisations look for employees with CPD requirements, which means, that by doing this course, you would be a potential candidate in your respective field. Certificate of Achievement Competency Certificate and Certificate of Achievement from Lead Academy You will receive a competency certificate after successfully completing the Part 2 of the phlebotomy course, which serves as confirmation that you are qualified to function as a phlebotomist without the need for close supervision. Also, on successful completion of the phlebotomy course, you will be eligible to obtain a CPD accredited PDF and Hardcopy certificate of achievement as proof of your new skill. The certificate of achievement is an official credential that confirms that you successfully finished a course with Lead Academy.

Strengthen your relationship with professional marriage counselling in London, UK. Our skilled therapists provide tailored sessions to address marital challenges such as communication issues, trust problems, and intimacy concerns. With a focus on fostering a deeper connection and understanding, our counselling services aim to help you build a resilient and loving marriage. Key areas: couples therapy UK, relationship counselling UK, marital therapy UK, marriage support UK, UK marriage counselling, relationship therapy UK, marriage guidance UK. 3 x 1 hour sessions 

The University Foundation Programme (UFP) is a one-year intensive course that prepares both British and international students to attend top UK universities.

The Level 3 International Foundation Diploma for Higher Education Studies (L3IFDHES) is usually a one-year pre-university qualification that provides students with an entry route to an overseas university. The L3IFDHES prepares students with the essential English language skills, key transferable study skills, cultural knowledge, and chosen specialisms that universities feel bridges the gap between high school and undergraduate study. In January 2023 we offer pathways in business and higher finance. With agreements in place with over 70 universities across the globe, students’ can progress with confidence to a higher education course for further study. Entry Requirements For entry onto the NCC Education Level 3 International Foundation Diploma for Higher Education Studies (L3IFDHES) qualification students must have successfully completed secondary school education. Students must also meet the English language entry requirements of: • IELTS minimum score of 4.5 or above OR • GCE ‘O’ Level English D7 or above Alternatively, a student can take the free NCC Education Higher English Placement Test which is administered by our Accredited Partner Centre’s.

Our training programme will provide those involved at any stage of the process for procuring goods and/or services within their organisations with the knowledge and skillset to identify and mitigate the threat posed by the breadth and multi-layered complexity of procurement fraud, corruption and associated financial crime and money laundering.

Our training programme will provide those involved at any stage of the process for procuring goods and/or services within their organisations with the knowledge and skillset to identify and mitigate the threat posed by the breadth and multi-layered complexity of procurement fraud and corruption.

About this Training Course This intermediate to advanced level 3 full-day training course has been designed to provide participants with a detailed and up-to-date overview of the fluid mechanic fundamentals and operating practice of pumps, compressors and gas and steam turbines. Upon the successful completion of this course, participants will have acquired the practical knowledge to enable them not only to choose the correct device for a particular application but also be in a position to resolve many commonly occurring operating problems. Troubleshooting is an important part of this course and will cover the important topics of Machinery Root Cause Failure Analysis (RCFA) together with Vibration Analysis. This course is ideal for those personnel in the oil, gas, petrochemical, chemical, power and other process industries who require a wider and deeper appreciation of pumps, compressors and turbines, including their design, performance and operation. The participants will be taken through an intensive primer of turbo-machinery principles, using the minimum of mathematics, and will learn how to solve the many and varied practical industrial problems that are encountered. The course makes use of an extensive collection of VIDEO material together with case studies and numerical exercises. Training Objectives Upon the successful completion of this course, each participant will be able to: Apply a comprehensive knowledge of pumps, compressors & turbines and troubleshoot rotating equipment in a professional manner Identify the different types of turbomachinery including basic design aspects and highlighted problem areas Minimise compressor work by understanding the processes involved and identifying their efficiency Understand the flow through turbomachines and the corresponding velocity triangles including torque and power calculations Analyse the different types of centrifugal machines including their design, installation, operation, maintenance, re-rate/retrofit, troubleshooting and control Recognise the various beneficial design aspects of turbomachines and understand the crucial process of cavitation Carry out proper methods of device installation, operation, maintenance and troubleshooting Understand and apply the powerful methods of Machinery Root Cause Failure Analysis Understand the various methods of vibration analysis applied to device diagnostics Target Audience This course provides an overview of all significant aspects and considerations of pumps, compressors and turbines for those who are involved in the design, selection, maintenance or troubleshooting of such equipment. This includes maintenance, reliability, integrity, engineering, production and operations managers, engineers and other technical staff. Course Level Intermediate Advanced Trainer Your expert course leader is a Senior Mechanical & Instrumentation Engineer (UK, B. Sc., M.Eng., Ph D) with over 45 years of industrial experience in Process Control & Instrumentation, Pumps, Compressors, Turbines and Control Valve Technology. He is currently a Senior Independent Consultant to various petrochemical industries in the UK, USA, Oman, Kuwait and KSA where he provides consultancy services on both the application and operational constraints of process equipment in the oil & gas industries. During his early career, he held key positions in Rolls Royce (UK) where he was involved in the design of turbine blading for jet engines, subject to pre-specified distributions of pressure. During this period and since, he has also been closely involved in various aspects of Turbomachinery, Thermodynamics and Fluid Mechanics where he has become a recognised authority in these areas. Later, he joined the academic staff of University of Liverpool in the UK as a Professor in Mechanical Engineering Courses. A substantial part of his work has been concerned with detailed aspects of Flowmetering - both of single & multiphase flows. He has supervised doctoral research students in this area in collaboration with various European flowmeter manufacturers. He joined Haward Technology Middle East in 2002 and was later appointed as European Manager (a post which has since lapsed) and has delivered over 150 training courses in Flowmeasurement (single- and multi-phase), Control, Heat Exchangers, Pumps, Turbines, Compressors, Valve and Valve Selection as well as other topics throughout the UK, USA, Oman and Kuwait. During the last two years, he has delivered courses with other training companies operating in the Far and Middle East. He has published about 150 papers in various Engineering Journals and International Conferences and has contributed to textbooks on the topics listed above. POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information post training support and fees applicable Accreditions And Affliations

About this Training Course This course will begin with a presentation of topics to familiarize Process and Instrumentation Engineers with procedures and practices involved in the choice of sensors related to the measurement of temperature, pressure, level and flow in relation to single-phase flows. It will provide guidance on the optimum commercially available devices through a detailed comparison of their relative merits. At the heart of this course is sensor calibration which is a crucial element for these topics. The course will also examine the various types of flow control valve, including Globe, Slide, Needle, Eccentric plug and Ball valves and their characteristics in industrial application, while focusing on the problems of Cavitation and Flashing and methods to minimise or eradicate these issues. With the use of examples, industry case studies and a wide range of videos, this course will also cover all aspects of proportional (P), derivative (D) and integral (I) control. In particular, it will address the advantages and disadvantages of PI and PID control. It will also describe Cascade, Feed forward, Split Range, Override and Ratio Control techniques. Training Objectives By attending this course, participants will acquire the following knowledge and skills: Apply an in-depth knowledge to the measurement of temperature, pressure, level and flow as well as to the fluid mechanics of pipe flows Assess the advantages and disadvantages of the major flowmeter types including the differential pressure, rotary positive displacement, rotary-inferential, electromagnetic, ultrasonic and Coriolis mass flowmeters to determine the optimum choice for a given application Make a considered judgement of the choice of fluid level measurement devices Understand the various types of flow calibration, metering systems and provers Carry out tank measurement and tank calibration methods and to calculate net sellable quantities Discuss valve characteristics & trim selection and illustrate the process of control valve sizing Explain the terms Open and Closed loop Define Process Variable, Measured Variable, Set Point and Error Define Direct and Reverse controller actions Explain the terms Process Lag, Measurement Lag, Transmission Lag, and Response Lag and their effect on controllability Explain ON/ OFF Control and the inherent disadvantages Explain Proportional Control, Offset, Gain and Proportional Band and the advantages and disadvantages of Proportional only control Explain the fundamentals and operation principles of Integral (I) Action and the disadvantages of proportional plus integral control Explain the fundamentals and operation principles of Derivative (D) Action in conjunction with P action Describe the operating principles of a PID Controller and explain the applications and advantages of PID control Describe Cascade, Forward, Split Range and Ratio Control operation principles Target Audience This course will benefit instrumentation, inspection, control, custody metering and process engineers and other technical staff. It is also suitable for piping engineers, pipelines engineers, mechanical engineers, operations engineers, maintenance engineers, plant/field supervisors and foremen and loss control coordinators. Trainer Your expert course leader is a Senior Mechanical & Instrumentation Engineer (UK, B. Sc., M.Eng., Ph D) with over 45 years of industrial experience in Process Control & Instrumentation, Pumps, Compressors, Turbines and Control Valve Technology. He is currently a Senior Independent Consultant to various petrochemical industries in the UK, USA, Oman, Kuwait and KSA where he provides consultancy services on both the application and operational constraints of process equipment in the oil & gas industries. During his early career, he held key positions in Rolls Royce (UK) where he was involved in the design of turbine blading for jet engines, subject to pre-specified distributions of pressure. During this period and since, he has also been closely involved in various aspects of Turbomachinery, Thermodynamics and Fluid Mechanics where he has become a recognised authority in these areas. Later, he joined the academic staff of University of Liverpool in the UK as a Professor in Mechanical Engineering Courses. A substantial part of his work has been concerned with detailed aspects of Flowmetering - both of single & multiphase flows. He has supervised doctoral research students in this area in collaboration with various European flowmeter manufacturers. He joined Haward Technology Middle East in 2002 and was later appointed as European Manager (a post which has since lapsed) and has delivered over 150 training courses in Flowmeasurement (single- and multi-phase), Control, Heat Exchangers, Pumps, Turbines, Compressors, Valve and Valve Selection as well as other topics throughout the UK, USA, Oman and Kuwait. During the last two years, he has delivered courses with other training companies operating in the Far and Middle East. He has published about 150 papers in various Engineering Journals and International Conferences and has contributed to textbooks on the topics listed above. POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information post training support and fees applicable Accreditions And Affliations