17 Courses in Bradford

About this Training Course Geomechanical evaluations are about the assessment of deformations and failure in the subsurface due to oil & gas production, geothermal operations, CO2 storage and other operations. All geomechanical evaluations include four types of modelling assumptions, which will be systematically addressed in this training, namely: 1. Geometrical modelling assumption: Impact of structural styles on initial stress and stress redistribution due to operations 2. Formation (or constitutive) behaviour: Linear elastic and non-linear behaviour, associated models and their parameters, and methods how to constrain these using 3. Initial stress: Relation with structural setting and methods to quantify the in-situ stress condition 4. Loading conditions: Changes in pore pressure and temperature on wellbore and field scale This 5 full-day course starts with the determination of the stresses in the earth, the impact of different structural styles, salt bodies, faulting and folding on the orientation of the three main principal stress components. Different (field) data sources will be discussed to constrain their magnitude, while exercises will be made to gain hands-on experience. Subsequently, the concepts of stress and strain will be discussed, linear elasticity, total and effective stress and poro-elasticity in 1D, 2D and 3D, as well as thermal expansion. Participants will be able to construct and interpret a Mohr-circles. Also, different failure mechanisms and associated models (plastic, viscous) will be discussed. All these concepts apply on a material point level. Next, geomechanics on the wellbore scale is addressed, starting with the stress distribution around the wellbore (Kirsch equations). The impact of mudweight on shear and tensile failure (fracturing) will be calculated, and participants will be able to determine the mudweight window stable drilling operations, while considering well deviation and the use of oil-based and water-based muds (pore pressure penetration). Fracturing conditions and fracture propagation will be addressed. Field-scale geomechanics is addressed on the fourth day, focussing on building a 3D geomechanical model that is fit-for-purpose (focussing on the risks that need evaluation). Here, geological interpretation (layering), initial stress and formation property estimation (from petrophysical logs and lab experiments) as well as determining the loading conditions come together. The course is concluded with interpretation of the field-wide geomechanical response to reservoir depletion with special attention to reservoir compaction & subsidence, well failure and fault reactivation & induced seismicity. Special attention is paid to uncertainties and formulating advice that impacts decision-making during development and production stages of a project. This course can also be offered through Virtual Instructor Led Training (VILT) format. Training Objectives Upon completing of this course, the participants will be able to: Identify potential project risks that may need a geomechanical evaluation Construct a pressure-depth plot based on available field data (density logs, (X)LOT, FIT, RFT) Employ log-based correlation function to estimate mechanical properties Produce a simplified, but appropriate geometrical (layered, upscaled) model that honours contrasts in initial stress, formation properties and loading conditions, including Construct and interpret a Mohr-circle for shear and tensile failure Calculate the mud weight that leads to shear and tensile failure (fracturing conditions) Identify potential lab experiments to measure required formation properties Describe the workflow and data to develop a field-wide fit-for-purpose geomechanical model Discuss the qualitative impact of pressure and temperature change on the risk related to compaction, well failure, top-seal integrity and fault reactivation Target Audience This course is intended for Drilling Engineers, Well Engineers, Production Technologists, Completion Engineers, Well Superintendents, Directional Drillers, Wellsite Supervisors and others, who wish to further their understanding of rock mechanics and its application to drilling and completion. There is no specific formal pre-requisite for this course. However, the participants are requested to have been exposed to drilling, completions and production operations in their positions and to have a recommended minimum of 3 years of field experience. Course Level Intermediate Trainer Your expert course leader has over 30 years of experience in the Oil & Gas industry, covering all geomechanical issues in the petroleum industry for Shell. Some of his projects included doing research and providing operational advice in wellbore stability, sand failure prediction, and oil-shale retortion among others. He guided multi-disciplinary teams in compaction & subsidence, top-seal integrity, fault reactivation, induced-seismicity and containment. He was also involved in projects related to Carbon Capture Storage (CCS). He is the founding father of various innovations and assessment tools, and developed new insights into the root causes seismicity induced by Oil & Gas production. Furthermore, he was the regional coordinator for technology deployment in Africa, and Smart Fields (DOFF, iField) design advisor for Shell globally. He was responsible for the Geomechanical competence framework, and associated virtual and classroom training programme in Shell for the last 10 years. He served as one of the Subject Matter Expert (SME) on geomechanics, provided Technical Assurance to many risk assessments, and is a co-author of Shell's global minimun standard on top-seal integry and containment. He has a MSc and PhD in Civil Engineering and computational mechanics from Delft University of Technology, The Netherlands. Training experience: Developed and delivered the following (between 2010 and 2020): The competence framework for the global geomechanical discipline in Shell Online Geomechanical training programs for petroleum engineers (post-doc level) The global minimum standard for top-seal integrity assessment in Shell Over 50 learning nuggets with Subject Matter Experts Various Shell virtual Geomechanical training courses covering all subjects Developed Advanced Geomechanical training program for experienced staff in Shell Coaching of KPC staff on Geomechanics and containment issues on an internship at Shell in The Netherlands, Q4 2014 Lectured at the Utrecht University summer school (The Netherlands, 2020) on induced seismicity among renowned earthquake experts (Prof. Mark Zoback, Prof. Jean-Philippe Avouac, Prof. Jean-Pierre Ampuero and Prof. Torsten Dahm) (https://www.nwo.nl/onderzoeksprogrammas/deepnl/bijeenkomsten/6-10-juli-2020-deepnl-webinar-series-induced-seismicity) Lectured at the Danish Technical University summer school (Copenhagen, 2021) summer school on Carbon Capture and Storage (https://www.oilgas.dtu.dk/english/Events/DHRTC-Summer-School) Virtual Carbon Capture and Storage (CCS): Project Risks & How to Manage Them training course (October and November 2021) POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information post training support and fees applicable Accreditions And Affliations

Spring summer flower wreath workshop. hosted by Leeds based Deck Your Door

I often buy clothes and accessories spontaneously. This results in a wardrobe full of pieces that don’t pair with anything. “I have nothing to wear….” I hear you say. A handful of treasures just hanging in there before progressing into a charity giveaway bag. Not if you know your true colours that will elevate your look and mood as well as save money and the environment. Based on this colour analysis we can create a capsule wardrobe using your existing pieces and follow your colour chart to purchase matching items in future. Whatever fashion dictates, buying less and more consciously will reduce waste, save money and creates a wonderful wardrobe you can be proud of! The analysis is based on inherited tones as well as personality. Based on 4 seasons: spring and autumn being warm and summer and winter cool in the colour spectrum.

Join our Cold Process Soap Workshop in Holmfirth! Learn to make beautiful, natural soaps with high-quality ingredients and essential oils. Perfect for beginners and soap enthusiasts. Book your spot now for a creative and fun-filled experience!

Do you want to learn a new skill? Then join us for a fun and informative workshop in container candle making at Crafters Cottage just outside Holmfirth.

The course introduces Down syndrome to people who have little experience of working with children with Down syndrome and covers society’s view of Down syndrome, health implications, strengths and weaknesses in the classroom and outlines ways to address the specific learning needs and manage behaviours.

Let’s make it visual — using visual resources to develop the language, communication and literacy skills of children with Down syndromeThis 3 hour course will cover why the written word is used as a visual tool to develop language skills. Methods to develop clarity of speech, grammar, vocabulary, and lengthen sentence utterance will be discussed and illustrated. It will also detail visual timetables, conversation diaries and ideas to develop reading, writing and spelling skills.

The inclusion of children with Down syndrome - expectations of behaviour By considering the learning profile of a child with Down syndrome and looking at areas of need this one day course will aim to address areas where difficult behaviours may develop. It will look at expectations, appropriate behaviour, including self help skills and go on to outline positive strategies by focusing on wanted behaviour.

Teaching basic number skills to children with Down syndrome and other learning difficulties using the Numicon approach. Basic number skills are vital to enable everyday social inclusion and independence. The training will commence with an overview of the learning profile of a child with Down syndrome; exploring working memory and how this impacts on learning numbers. It will detail how children learn basic number skills – recognising numbers, saying number names, counting to find ‘how many?’ and early hands on addition. It will explore the challenges faced by children who have Down syndrome and other learning disabilities and demonstrate how the use of Numicon as a visual representation of number can help to overcome these difficulties and lead to increased understanding and confidence.

It is vitally important that all adults working with a child with Down syndrome understands their learning needs and how to meet these needs. All teaching staff are welcome to join our Introduction to Down syndrome course for FREE. It will run at the beginning of each term. To enhance your practice further we suggest staff working closely with the child are also trained in signing, using visuals to support language development and teaching basic number skills. Each term these additional three courses will follow on from the Introduction to Down syndrome course over several weeks.