- Professional Development
- Medicine & Nursing
- Arts & Crafts
- Health & Wellbeing
- Personal Development
3 Courses in Bradford
Working with environmental responsibilities (In-House)
By The In House Training Company
This course follows the Institute of Occupational Safety and Health's syllabus. A one-day programme, it is suitable for all people at all levels in the workplace and gives a basic introduction to the principles of environmental management. On successful completion of the course, participants will be able to: Understand the terms 'environment' and 'pollution' Understand the terms 'hazard' and 'risk' related to the environment Better appreciate environmental issues generally, and specifically in respect of their organisation Identify hazards to the environment from working practices Outline the procedures/controls necessary to prevent damage to the environment 1 What is the environment? - putting the environment in context Key environmental issues and how we contribute Definition of the environment 2 Working with the environment What is pollution? Sources, receptors and pathways Environmental consequences workshop - identifying the environmental consequences of our working practices Environmental risk assessment Effective control mechanisms 3 Protecting the environment - Environmental Management Systems What is an Environmental Management System (EMS)? What are the benefits of having an EMS? EMS structure and models Identifying what elements of EMS your company has and how they work Roles and responsibilities 4 Choice of module Option 1: Organisation-specific moduleThis module can be used to introduce environmental concepts that are specific to your activities and operations, and will be compiled through discussion with your organisation Option 2: Environmental best practiceIf no organisation-specific module is required, or if participants from a number of organisations attend, generic operational environmental best practices can be covered instead. Areas covered include waste management, fuel storage and use, hazardous materials, emissions to air and water and environmental incidents
Managing Safely Refresher - IOSH Award (In-House)
By The In House Training Company
The IOSH Managing Safelyaward is valid for three years. Award-holders need to undertake this one-day refresher programme every three years in order to maintain their status. This very interactive, practical programme covers: An interactive case study exercise is used throughout the day to apply refreshed knowledge to the plan-do-check-act model and then link it back to the workplace. For example, participants examine the elements of a safety and health policy, come up with ideas to influence safety culture, and select the best communication methods to engage a workforce.
Abrasive Wheels Training Nearly half of the workplace accidents involving abrasive wheels are due to an unsafe work system or operator error. This indicates that many of these incidents can be avoided if the risks of working with abrasive wheels are clearly communicated, and the correct safety measures are adopted, Abrasive Wheels Training will eliminate most accidents with Abrasive Wheels. With the appropriate Abrasive wheels training in place, you could significantly reduce the risk of an injury such as friction burns, crushed fingers and loss of eyesight which are the most common amongst abrasive wheel operators with the misuse of machines. This Abrasive Wheels Training Course is designed to assist in reducing the risk of injury for anyone who uses abrasive wheels at work. It guides you through the different types of abrasive wheels, how to identify and store them, how they should be used safely, and how they should be inspected prior to use. Our Abrasive Wheels Training will give all candidates hands-on practical training. Book with Confidence at Vally Plant Training At Vally Plant Training, we guarantee unbeatable value with our Price Match Promise. When you choose us, you can book with confidence, knowing that we will not be beaten on price. If you find a lower price for the same NPORS Experienced Worker Test, we’ll match it—ensuring you receive top-quality training at the best possible rate. Your skills, our commitment—always at the best price. Abrasive Wheels Course Duration 3-4 Hours Petrol Cut Off Saw 1 Day for all candidates Certification NPORS Traditional card – lasts for 5 years and is mainly accepted with housebuilders, utilities, port and marine as proof of competence OR NPORS card with CSCS logo – accepted by all major building contractor’s. The initial card is the RED trained operator card which lasts for 2 years and can be upgraded to BLUE competent operator card further to completion of relevant NVQ. In house certificates: suitable as proof of operator competence accepted for insurance and HSE compliance. Introduction to Abrasive Wheels Definition of Abrasive Wheels Abrasive wheels are tools used for cutting, grinding, and polishing various materials. They are made from abrasive particles, like grit, bonded together to form a solid wheel. When these wheels spin at high speeds, they can shape or finish different surfaces effectively. Types of Abrasive Wheels Commonly Used in Industry Bonded Abrasive Wheels: These are made by combining abrasive particles with a bonding material to form a solid wheel. Bonded abrasive wheels are typically used for tasks like grinding, cutting, and finishing metal or stone. Coated Abrasive Wheels: These have an abrasive layer attached to a backing material, like paper or cloth. Coated abrasive wheels are commonly used for sanding and smoothing surfaces, often in woodworking or metalworking. Abrasive wheel training is essential for learning how to use these tools safely and effectively. Understanding the different types of abrasive wheels and their applications can help you choose the right wheel for your job, ensuring efficiency and safety. Importance of Proper Training Overview of the Risks Associated with Improper Use Using abrasive wheels without proper training can be very dangerous. The importance of proper training cannot be overstated when it comes to the safe and effective use of abrasive wheels. Improper use of abrasive wheels can lead to serious accidents, such as wheel breakage, which can cause flying debris and severe injuries. Other risks include cuts, burns, and eye injuries from sparks or fragments. Not knowing how to handle the equipment properly can also result in damaged materials and inefficient work, leading to wasted time and resources. Benefits of Trained Versus Untrained Usage Undergoing abrasive wheel training is crucial for several reasons: Safety: Trained individuals know how to handle abrasive wheels safely, reducing the risk of accidents and injuries. They learn to inspect the wheels for damage, choose the right type of wheel for the job, and use protective gear correctly. Efficiency: Training ensures that users understand how to use abrasive wheels effectively, leading to faster and more accurate work. Trained users can achieve better results with less effort and time. Cost-Effectiveness: Proper training helps prevent damage to the wheels and the materials being worked on, saving money on replacements and repairs. It also minimizes downtime due to accidents or improper usage. Compliance: Many industries require certification for using abrasive wheels. Completing abrasive wheel training ensures compliance with safety regulations and industry standards, which is essential for legal and insurance purposes. In summary, abrasive wheel training equips users with the knowledge and skills needed to use abrasive wheels safely and efficiently, making the workplace safer and more productive. Getting Started with Abrasive Wheels Essential Equipment and Setup Before using abrasive wheels, it’s important to have the right equipment and ensure everything is set up properly. Here’s what you need: Protective Gear: Always wear safety goggles, gloves, ear protection, and a dust mask to protect yourself from flying debris, noise, and dust. Abrasive Wheels: Have a selection of abrasive wheels suitable for the tasks you plan to perform. This includes grinding wheels, cutting wheels, and sanding discs. Mounting Equipment: Ensure you have the correct flanges, spacers, and mounting hardware to secure the wheel to the machine properly. Tools and Machines: Use the appropriate tools and machines for your abrasive wheels, such as grinders, sanders, or cut-off saws. Make sure these machines are in good working condition. Work Area: Set up your work area with adequate lighting, ventilation, and space to move around safely. Ensure there are no flammable materials nearby. Completing an abrasive wheels training course will guide you on how to properly set up and use this equipment. Selecting the Right Wheel for the Job Choosing the right abrasive wheel is crucial for getting the job done efficiently and safely. Here’s how to select the right wheel: Material to Be Worked On: Different materials require different types of wheels. For example, use a grinding wheel for metal and a sanding disc for wood. Wheel Specification: Check the specifications of the wheel, including its grit size, bonding material, and hardness. Finer grits are better for finishing, while coarser grits are used for rough grinding. Machine Compatibility: Ensure the wheel is compatible with your machine. Check the wheel’s size, speed rating, and mounting requirements. Type of Task: Match the wheel to the task. Use cutting wheels for cutting, grinding wheels for grinding, and polishing wheels for finishing tasks. Enrolling in a grinding wheel training course can provide detailed guidance on selecting and using the right wheels for different jobs. Proper selection and setup not only improve efficiency but also enhance safety and prolong the life of the abrasive wheels. Safe Operation Techniques Step-by-Step Guide on How to Operate Abrasive Wheels Safely Inspect the Wheel: Before using any abrasive wheel, inspect it for cracks, chips, or other damage. Do not use a damaged wheel. Mount the Wheel Properly: Ensure the wheel is properly mounted on the machine. Follow the manufacturer’s instructions for correct mounting and balancing. Check Machine Guards: Make sure all safety guards are in place and functioning correctly. Guards help protect you from flying debris and accidental contact with the wheel. Wear Protective Gear: Always wear safety goggles, gloves, ear protection, and a dust mask to protect against sparks, noise, and dust. Start the Machine Safely: Stand to the side of the machine when starting it, not directly in front of the wheel. Allow the wheel to reach full speed before using it. Use Proper Technique: Apply light, even pressure to the workpiece. Avoid forcing the wheel or using excessive pressure, as this can cause the wheel to break. Maintain Control: Keep a firm grip on the tool or workpiece to prevent it from slipping or catching. Avoid Overheating: Use intermittent cuts and allow the wheel to cool down to avoid overheating, which can weaken the wheel and cause it to break. Regular Breaks: Take regular breaks to avoid fatigue, which can lead to mistakes and accidents. Completing an abrasive wheel training course can provide practical demonstrations of these safety techniques. Comparison with Other Cutting Methods Feature Abrasive Wheels Saws (Circular/Band) Laser Cutters Versatility High: Can cut metals, stone, ceramics. Moderate: Best for wood and certain metals. High: Can cut metals, plastics, composites. Precision High: Provides precise cuts and finishes. Moderate: Effective for straight cuts, less precise for intricate designs. Very High: Capable of intricate designs and clean cuts. Cost Low: Generally cheaper initial and maintenance costs. Moderate: Higher initial cost than abrasive wheels but longer lifespan. High: Expensive initial investment and maintenance costs. Portability High: Many tools are portable for on-site cutting and grinding. Low: Often require stationary setups. Low: Typically not portable and integrated into fixed setups. Safety Risks High: Requires proper training to prevent accidents (e.g., HSE, OSHA). Moderate: High-speed blades can be dangerous, need safety measures. Moderate: Requires specialized training to handle safety risks (e.g., reflective materials). Dust/Debris High: Generates significant dust and debris. Low: Produces less dust and debris. Very Low: Minimal dust and debris, cleaner cutting process. Wear and Tear High: Abrasive wheels wear down with use and need regular replacement. Low: Blades have a longer lifespan, less frequent replacement needed. Low: Lasers do not wear down, but components may need maintenance. Training Availability High: Numerous training courses available (e.g., HSE, OSHA). Moderate: Training available but not as comprehensive as abrasive wheel training. High: Specialized training required for safe operation and maintenance. Compliance High: Training helps meet regulatory requirements (e.g., PUWER 1998). Moderate: Safety training helps meet general safety regulations. High: Requires adherence to safety standards and protocols. Operational Speed Moderate: Suitable for detailed work, not as fast as saws for straight cuts. High: Faster cutting speeds for straight cuts. Moderate: Speed depends on material and thickness, generally slower than saws for thicker materials. Common Mistakes and How to Avoid Them Using a Damaged Wheel: Mistake: Using an abrasive wheel with cracks or chips. Solution: Always inspect the wheel before use and replace damaged wheels immediately. Improper Mounting: Mistake: Incorrectly mounting the wheel, leading to imbalance and breakage. Solution: Follow the manufacturer’s instructions and ensure the wheel is securely mounted. Skipping Protective Gear: Mistake: Not wearing safety gear, increasing the risk of injury. Solution: Always wear the recommended protective equipment, including goggles, gloves, and ear protection. Excessive Pressure: Mistake: Applying too much pressure, which can cause the wheel to break. Solution: Use light, even pressure and let the wheel do the work. Incorrect Wheel for the Job: Mistake: Using the wrong type of wheel for the material or task. Solution: Select the appropriate wheel based on the material and the task. Refer to the specifications and guidelines provided during abrasive wheels training. By understanding and avoiding these common mistakes, you can ensure safer and more efficient use of abrasive wheels. Proper training, like an abrasive wheel course, is essential to master these techniques and avoid potential hazards. Maintenance and Care Tips for Maintaining Abrasive Wheels Regular Cleaning: Clean the abrasive wheels regularly to remove any debris or buildup. Use a brush or compressed air to clean the wheel, ensuring it remains effective and prevents clogging. Proper Storage: Store abrasive wheels in a dry, cool place to prevent moisture damage. Keep them on a flat surface or in a vertical position to avoid warping or deformation. Wheel Dressing: Dress the wheel regularly using a wheel dresser to maintain its shape and expose fresh abrasive particles. This helps keep the wheel sharp and efficient. Avoid Overloading: Do not overload the wheel by forcing it to cut or grind faster than its capacity. Overloading can cause excessive wear and reduce the wheel’s lifespan. Use Correct Speed: Always operate the wheel at the recommended speed. Check the maximum speed rating of the wheel and ensure your machine does not exceed this limit. Balanced Use: Use the entire surface of the wheel evenly to prevent uneven wear. Avoid focusing on one spot for too long, which can create grooves and weaken the wheel. Lubrication: If applicable, use the appropriate lubricant to reduce friction and heat buildup. This can extend the life of the wheel and improve performance. How to Check for Wear and Damage Visual Inspection: Before each use, visually inspect the wheel for cracks, chips, or other damage. A damaged wheel can be dangerous and should be replaced immediately. Sound Test: Perform a sound test by gently tapping the wheel with a non-metallic object (like a wooden handle). A clear ringing sound indicates the wheel is intact, while a dull sound suggests it may be cracked and unsafe to use. Check for Unusual Vibrations: When the wheel is running, check for unusual vibrations or wobbling. This can indicate imbalance or damage. Stop using the wheel if you notice these signs and inspect it further. Measure Wheel Wear: Measure the diameter of the wheel regularly to monitor wear. Replace the wheel when it reaches the minimum usable diameter specified by the manufacturer. Surface Condition: Examine the surface of the wheel for glazing or loading. A glazed wheel appears shiny and smooth, indicating it is worn out and needs dressing or replacement. A loaded wheel is clogged with material and may require cleaning or dressing. Mounting Hardware: Check the flanges, spacers, and other mounting hardware for wear or damage. Ensure they are secure and in good condition to maintain proper wheel alignment. Regular maintenance and careful inspection of abrasive wheels can significantly extend their lifespan and ensure safe, efficient operation. Abrasive wheels training provides detailed guidelines on maintaining and checking wheels for wear and damage, helping users develop good maintenance habits. Health and Safety Guidelines Detailed Safety Precautions and Protective Gear Wear Appropriate Protective Gear: Safety Goggles or Face Shield: Protect your eyes and face from flying debris and sparks. Gloves: Wear sturdy gloves to protect your hands from sharp edges and hot materials. Ear Protection: Use earplugs or earmuffs to protect your hearing from the noise produced by grinding operations. Dust Mask or Respirator: Prevent inhalation of dust and particles, especially when working with materials that produce harmful dust. Apron or Protective Clothing: Wear a durable apron or long-sleeved clothing to shield your body from sparks and debris. Machine Safety Checks: Guarding: Ensure all machine guards are in place and secure before operation. Speed Check: Confirm that the machine’s speed does not exceed the wheel’s maximum rated speed. Work Area: Keep the work area clean and free of clutter to prevent tripping hazards. Safe Operation Practices: Proper Setup: Mount the abrasive wheel correctly, following the manufacturer’s instructions. Ensure it is balanced and secure. Correct Usage: Use the abrasive wheel only for its intended purpose. Avoid side grinding unless the wheel is specifically designed for it. Pressure Application: Apply light, even pressure to avoid overloading the wheel and causing it to break. Regular Inspections: Pre-Use Inspection: Check the wheel for any cracks, chips, or signs of wear before each use. During Use: Monitor the wheel for unusual vibrations or noises, and stop the machine immediately if any issues arise. What to Do in Case of an Accident Immediate Response: Stop the Machine: Turn off the machine immediately to prevent further injury. First Aid: Administer first aid for minor injuries. This may include cleaning cuts, applying bandages, and using cold compresses for burns or abrasions. Seek Medical Help: For serious injuries, seek professional medical assistance immediately. Call emergency services if necessary. Report the Incident: Inform Supervisors: Report the accident to your supervisor or safety officer. Provide details about how the incident occurred and the extent of the injuries. Document the Incident: Fill out an accident report form, including information about the equipment used, the nature of the injury, and any contributing factors. Review and Improve Safety Practices: Incident Analysis: Analyze the accident to determine its cause. Review whether safety protocols were followed and identify any gaps in training or equipment maintenance. Safety Training: Consider additional abrasive wheels training or a refresher course to reinforce safe practices and prevent future accidents. Online courses can be a convenient way to update your knowledge. Preventive Measures: Review Procedures: Ensure that all safety procedures are up-to-date and that all employees are familiar with them. Safety Drills: Conduct regular safety drills to prepare for potential accidents and improve response times. Legal Requirements and Certifications Overview of Relevant Laws and Regulations Using abrasive wheels involves adhering to specific safety laws and regulations to ensure the safety and health of workers. Here’s an overview of the key legal requirements: Occupational Safety and Health Administration (OSHA): In the United States, OSHA sets standards for the safe use of abrasive wheels. Employers must comply with OSHA regulations, including proper machine guarding, employee training, and the use of personal protective equipment (PPE). Provision and Use of Work Equipment Regulations (PUWER): In the UK, PUWER requires that work equipment, including abrasive wheels, is suitable for its intended use, properly maintained, and only operated by trained personnel. European Safety Standards: In Europe, EN 12413 is the standard for bonded abrasive products. It sets out requirements for safety, marking, and product testing to ensure the safe use of abrasive wheels. Regular Inspections and Maintenance: Laws often require regular inspections and maintenance of abrasive wheels and related machinery to ensure they remain in safe working condition. Record Keeping: Employers must keep records of all training, inspections, and maintenance activities related to abrasive wheels. How to Get Certified in Abrasive Wheels Training Getting certified in abrasive wheels training involves completing a recognized course and passing the necessary assessments. Here’s how you can achieve certification: Find a Training Provider: Look for accredited training providers that offer courses on abrasive wheels. Valley Plant Training is a well-known provider that offers comprehensive abrasive wheel training courses. You can also search for “abrasive wheel training near me” to find local providers or explore online options. Enroll in an Abrasive Wheel Course: Choose a course that covers both theoretical and practical aspects of abrasive wheel safety. The course should include topics such as wheel selection, proper mounting, safe operation techniques, and maintenance. Valley Plant Training offers courses that meet these criteria. Complete the Training: Attend the training sessions and participate actively. Training can be done in-person or online, depending on your preference and availability. Online courses can be convenient and flexible for busy schedules. Pass the Assessment: At the end of the course, you’ll need to pass an assessment to demonstrate your understanding of the material. This may include a written test and a practical demonstration of your skills. Receive Your Abrasive Wheels Certificate: Upon successful completion of the course and assessment, you will receive an abrasive wheels certificate. This certificate is proof that you have been trained in the safe use of abrasive wheels. Regular Refresher Courses: It’s important to stay updated with the latest safety practices and regulations. Consider taking refresher courses periodically to keep your skills and knowledge current. Valley Plant Training also offers refresher courses to help you stay up-to-date. Obtaining an abrasive wheel training certification from Valley Plant Training or another reputable provider not only enhances your safety and efficiency but also ensures compliance with legal requirements. It demonstrates to employers and regulatory bodies that you are qualified to handle abrasive wheels safely and effectively. Frequently Asked Questions What is abrasive wheel training? This is a training course that teaches you how to safely use and take care of machines that have abrasive wheels, like grinders. It covers choosing the right wheel, setting it up, and learning safety rules to prevent accidents. How much does abrasive wheels training cost? The price can change depending on where you are and who’s teaching the course. Generally, it might cost between £150.00 and £250 for the basic training. How long does abrasive wheels training last? Most basic courses take about a day to complete, around 6 to 8 hours. More detailed courses might take longer, especially if they include hands-on practice. Can abrasive wheel training be done online? Yes, you can learn the theory part online at your own pace. For learning how to actually use the wheels, you might need to attend a session in person to get practical experience. What are the two types of abrasive wheels? There are two main kinds: bonded and coated abrasive wheels. Bonded wheels are made of abrasive particles stuck together and are used for tasks like grinding or cutting. Coated wheels have a layer of abrasive glued to a backing material and are used for smoothing surfaces. What are the rules for abrasive wheels? The main rules include setting up the wheel correctly, wearing the right safety gear, checking the wheel regularly for damage, and following specific steps when using it to stay safe. There are also official safety standards you need to follow. Testing Of Candidates We will assess the delegates throughout the course on their levels of participation and understanding, they will demonstrate the inspection of various Abrasive wheels for damage and suitability. Then the delegates will complete a 25 question assessment paper at the end of the course. Successful delegates will be issued with the NPORS operator card Abrasive Wheels Training Covers: The requirements of the HASAW and PUWER and all associated regulations in respect of Abrasive Wheels. Hazards arising from the use of Abrasive Wheels and the precautions that should be taken. How to identify the Abrasive Wheel types and characteristics. Storage, handling and transportation of Abrasive Wheels. Inspecting and testing Abrasive Wheels. Personal protective equipment. Abrasive Wheels Training Available 7 days a week to suit your business requirements. VPT have a team of friendly and approachable instructors, who have a wealth of knowledge of abrasive wheels and the construction industry We have our own training centre for abrasive wheels conveniently located close to the M5 junction 9, In Tewkesbury. With its own purpose-built practical training area to simulate an actual working environment. Our abrasive wheels training and test packages are priced to be competitive. Discounts are available for multiple bookings We can send a fully qualified NPORS abrasive wheels Tester to your site nationwide, to reduce the amount of time away from work Other course: Enhance your skills with our specialized courses, including Lift Supervision Training, Appointed Person Training, Telehandler Training, Cat & Genny Training, Slinger Signaller Training, Lorry Loader Training and Crusher Training. Each program is designed to equip you with the expertise needed for excellence in your field.
Online Options
Show all 66Professional Certificate Course in Introduction to Occupational Safety and Health in London 2024
(261)By Metropolitan School of Business & Management UK
Investing in occupational safety and health promotes a culture of safety and well-being in the workplace, reducing accidents and injuries while improving employee satisfaction and productivity. After the successful completion of the course, you will be able to learn about the following, Understand the Nature, Concepts and Importance Of Occupational Health and Safety. Appreciate the Reasons for Promoting Health and Safety Standards. Explore the concept of Occupational Health and Safety Act and OSHA Inspections. Learn the Penalties for Violation of the OSHA Law. Appreciate the Modern Workers' Compensation Laws. Understand Accident Causation and Investigation Theory and its Application. Understand the Concepts of Risk, Incidents and Accidents. This course provides a comprehensive understanding of occupational health and safety, covering topics such as the nature and concepts of workplace safety, reasons for promoting health and safety standards, OSHA inspections, penalties for violations, modern workers' compensation laws, accident causation theory, and risk management principles. Participants will learn practical strategies for preventing workplace incidents, conducting effective accident investigations, and implementing safety measures to mitigate risks. VIDEO - Course Structure and Assessment Guidelines Watch this video to gain further insight. Navigating the MSBM Study Portal Watch this video to gain further insight. Interacting with Lectures/Learning Components Watch this video to gain further insight. Understanding Occupational Health and Safety Self-paced pre-recorded learning content on this topic. Introduction to Occupational Safety and Health Put your knowledge to the test with this quiz. Read each question carefully and choose the response that you feel is correct. All MSBM courses are accredited by the relevant partners and awarding bodies. Please refer to MSBM accreditation in about us for more details. There are no strict entry requirements for this course. Work experience will be added advantage to understanding the content of the course. The certificate is designed to enhance the learner's knowledge in the field. This certificate is for everyone eager to know more and get updated on current ideas in their respective field. We recommend this certificate for the following audience. CEO, Director, Manager, Supervisor Safety Manager Human Resources Personnel Occupational Health Nurse Safety Coordinator Safety Inspector Health and Safety Officer Environmental Health Specialist Risk Manager Compliance Officer Workplace Health and Safety Consultant Safety Trainer Construction Safety Manager Industrial Hygienist Occupational Health and Safety Consultant Safety Engineer Average Completion Time 2 Weeks Accreditation 3 CPD Hours Level Advanced Start Time Anytime 100% Online Study online with ease. Unlimited Access 24/7 unlimited access with pre-recorded lectures. Low Fees Our fees are low and easy to pay online.
The Occupational Safety and Incident Management course provides comprehensive training in workplace first aid, incident management, and essential life-saving techniques. Covering legal frameworks, primary and secondary surveys, CPR, injury management, and emergency protocols, this course equips participants with the skills to effectively respond to various workplace emergencies. Learning Outcomes: Understand the fundamentals of workplace first aid and its importance. Familiarize yourself with the legal framework surrounding workplace first aid. Gain proficiency in incident management strategies for different workplace scenarios. Learn the primary and secondary survey techniques to assess injuries and conditions. Acquire practical knowledge of basic first-aid techniques for minor injuries. Develop skills to handle secondary illnesses and breathing problems at the workplace. Gain confidence in responding to fractures, dislocations, and other injuries. Know how to initiate emergency protocols and effectively call for help. Why buy this Occupational Safety and Incident Management? Unlimited access to the course for forever Digital Certificate, Transcript, student ID all included in the price Absolutely no hidden fees Directly receive CPD accredited qualifications after course completion Receive one to one assistance on every weekday from professionals Immediately receive the PDF certificate after passing Receive the original copies of your certificate and transcript on the next working day Easily learn the skills and knowledge from the comfort of your home Certification After studying the course materials of the Occupational Safety and Incident Management you will be able to take the MCQ test that will assess your knowledge. After successfully passing the test you will be able to claim the pdf certificate for £5.99. Original Hard Copy certificates need to be ordered at an additional cost of £9.60. Who is this course for? Employees and managers across various industries seeking to enhance workplace safety. Health and safety officers responsible for implementing safety protocols. Individuals interested in obtaining workplace first aid and incident management skills. Emergency response team members and safety committee members. Prerequisites This Occupational Safety and Incident Management was made by professionals and it is compatible with all PC's, Mac's, tablets and smartphones. You will be able to access the course from anywhere at any time as long as you have a good enough internet connection. Career path Health and Safety Officer: Implement and oversee workplace safety protocols and incident response. Emergency Response Team Member: Act as first responders during workplace emergencies. Human Resources Manager: Ensure employee well-being by promoting workplace safety and preparedness. Occupational Health Nurse: Provide medical support and emergency care in occupational settings. Facility Manager: Maintain safe work environments and coordinate emergency procedures. Course Curriculum Occupational Safety and Incident Management Introduction to Workplace First Aid 00:34:00 Legal Framework for Workplace First Aid 00:29:00 Incident Management at Work 00:34:00 Primary Survey 00:20:00 Secondary Survey 00:21:00 Basic First-Aid Techniques 00:38:00 Dealing with Minor Injuries at the Workplace 00:42:00 Secondary Illness Loss of Responsiveness and CPR 00:18:00 Secondary Illness Breathing Problems 00:17:00 Secondary Illnesses and Injuries 00:27:00 Dealing With Fractures and Dislocations 00:19:00 Call for an Emergency 00:14:00
Explore the world of occupational safety with our comprehensive course, 'Engineering & Work Practice Controls.' Gain expertise in identifying and evaluating hazards, implementing effective engineering and work practice controls, and ensuring regulatory compliance. Discover sustainable practices, industry best practices, and real-world case studies. Elevate your skills in creating a safer and healthier work environment. Join us for a transformative learning experience in safety management, risk assessment, and environmental sustainability. Enroll today for a future where workplace well-being meets engineering excellence.
IOSH - Managing safely online course
By Airborne Environmental Consultants Ltd
The main learning outcomes of the course are: Describe the key reasons to manage safety and health in the workplace Define the key terms relating to safety and health Identify how the law can have an impact on safety and health in the workplace Describe how to assess, reduce and control risk in the workplace Identify workplace hazards and risks, their impact and how to manage them Identify how to evaluate and respond to an incident List the benefits and characteristics of an effective health and safety management system Describe the principles that underpin good safety and health performance
Workplace Safety Training Course
By Lead Academy
Quality Guarantee: Promising training excellence, satisfaction gurantee Accredited by CPD UK & Quality License Scheme Tutor Support Unlimited support via email, till you complete the course Recognised Certification: Accepted by thousands of professional bodies Start Anytime With 1 year access to the course materials Online Learning Learn from anywhere, whenever you want In this course, you will learn various safety protocols and essential skills to create a secure and hazard-free work environment. This course will help you become a safety-conscious professional capable of identifying potential dangers and implementing effective safety measures. This course at a glance Accredited by CPD UK Endorsed by Quality Licence Scheme Get to know office ergonomics Understand the occupational safety program Learn corrective actions for safety Know the risk factors and causes of MSDs Understand the basic safety practices at the workplace Get acquainted with ergonomics-related injuries Know personal protective equipment Learn the benefits of the ergonomics program Learn the OSHA's standards Understand workplace safety inspection Get introduced to industrial hygiene Know respiratory protection Why Workplace Safety Training Course right for you? This extensive online course is beneficial for those who want to understand occupational safety programs, workplace safety inspections, corrective actions for safety, and personal protective equipment. You will also have a broad knowledge of electrical safety precautions, basic safety practices at the workplace, and OSHA's standards. In addition, this online course will introduce you to OSHA, industrial hygiene, safety and health programs. This interactive course will give you a thorough understanding of respiratory protection, walking and working surfaces, and hazard communications. By the end of the course, you will gain a deep understanding of safety practices at the workplace, occupational safety programs, and workplace safety inspections. Workplace Safety Training Course Details Accredited by CPD certificates are accepted by thousands of professional bodies and government regulators here in the UK and around the world. Many organisations look for employees with CPD requirements, which means, that by doing this course, you would be a potential candidate in your respective field. The Quality Licence Scheme is a brand of the Skills and Education Group, a leading national awarding organisation for providing high-quality vocational qualifications across a wide range of industries. Course Curriculum Introduction Introduction What is Ergonomics What is Ergonomics Benefits of Ergonomic Program Benefits of Ergonomic Program Ergonomic Related Injuries Ergonomic Related Injuries Risk Factors and Causes of MSDs Risk Factors and Causes of MSDs Office Ergonomics Office Ergonomics Occupational Safety Program Occupational Safety Program Workplace Safety Inspection Workplace Safety Inspection Corrective Actions for Safety Corrective Actions for Safety Personal Protective Equipment Personal Protective Equipment Precautions for Electrical Safety Precautions for Electrical Safety Basic Safety Practices at Workplace Basic Safety Practices at Workplace OSHAs Standard OSHAs Standard Who should take this course? This extensive workplace safety training course is beneficial for those who want to stay updated on workplace safety best practices and learn OSHA standards. It is ideal for those who want to pursue a career in the field of workplace safety. Entry Requirements There are no academic entry requirements for this workplace safety training course, and it is open to students of all academic backgrounds. However, you are required to have a laptop/desktop/tablet or smartphone and a good internet connection. Assessment Method This workplace safety training course assesses learners through multiple-choice questions (MCQs). Upon successful completion of the modules, learners must answer MCQs to complete the assessment procedure. Through the MCQs, it is measured how much a learner can grasp from each section. In the assessment pass mark is 60%. Certification Endorsed Certificate from Quality Licence Scheme After successfully passing the MCQ exam you will be eligible to order the Endorsed Certificate by Quality Licence Scheme. The Quality Licence Scheme is a brand of the Skills and Education Group, a leading national awarding organisation for providing high-quality vocational qualifications across a wide range of industries. It will give you a competitive advantage in your career, making you stand out from all other applicants and employees. There is a Quality Licence Scheme endorsement fee to obtain an endorsed certificate which is £65. Certificate of Achievement from Lead Academy After successfully passing the MCQ exam you will be eligible to order your certificate of achievement as proof of your new skill. The certificate of achievement is an official credential that confirms that you successfully finished a course with Lead Academy. Certificate can be obtained in PDF version at a cost of £12, and there is an additional fee to obtain a printed copy certificate which is £35. FAQs Is CPD a recognised qualification in the UK? CPD is globally recognised by employers, professional organisations and academic intuitions, thus a certificate from CPD Certification Service creates value towards your professional goal and achievement. CPD-certified certificates are accepted by thousands of professional bodies and government regulators here in the UK and around the world. Are QLS courses recognised? Although QLS courses are not subject to Ofqual regulation, they must adhere to an extremely high level that is set and regulated independently across the globe. A course that has been approved by the Quality Licence Scheme simply indicates that it has been examined and evaluated in terms of quality and fulfils the predetermined quality standards. When will I receive my certificate? For CPD accredited PDF certificate it will take 24 hours, however for the hardcopy CPD certificate takes 5-7 business days and for the Quality License Scheme certificate it will take 7-9 business days. Can I pay by invoice? Yes, you can pay via Invoice or Purchase Order, please contact us at info@lead-academy.org for invoice payment. Can I pay via instalment? Yes, you can pay via instalments at checkout. How to take online classes from home? Our platform provides easy and comfortable access for all learners; all you need is a stable internet connection and a device such as a laptop, desktop PC, tablet, or mobile phone. The learning site is accessible 24/7, allowing you to take the course at your own pace while relaxing in the privacy of your home or workplace. Does age matter in online learning? No, there is no age limit for online learning. Online learning is accessible to people of all ages and requires no age-specific criteria to pursue a course of interest. As opposed to degrees pursued at university, online courses are designed to break the barriers of age limitation that aim to limit the learner's ability to learn new things, diversify their skills, and expand their horizons. When I will get the login details for my course? After successfully purchasing the course, you will receive an email within 24 hours with the login details of your course. Kindly check your inbox, junk or spam folder, or you can contact our client success team via info@lead-academy.org
Site Supervisor Safety Training
By Course Cloud
This Site Supervisor Safety Training course is a comprehensive guide for supervisors, focusing on occupational safety principles, health laws, behavioural impacts, and practical risk assessments. Gain crucial knowledge to foster safer work environments, particularly in construction and tool handling, while complying with legal standards. Equip yourself with the skills to implement effective safety measures, promote a proactive safety culture, and mitigate hazards. Ideal for professionals seeking to advance safety leadership abilities and ensure well-being in the workplace. Improve site safety standards, minimise accidents, and optimise productivity.
Do you want to prepare for your dream job but strive hard to find the right courses? Then, stop worrying, for our strategically modified Health and Safety in Construction bundle will keep you up to date with the relevant knowledge and most recent matters of this emerging field. So, invest your money and effort in our 40 course mega bundle that will exceed your expectations within your budget. The Health and Safety in Construction related fields are thriving across the UK, and recruiters are hiring the most knowledgeable and proficient candidates. It's a demanding field with magnitudes of lucrative choices. If you need more guidance to specialise in this area and need help knowing where to start, then StudyHub proposes a preparatory bundle. This comprehensive Health and Safety in Construction bundle will help you build a solid foundation to become a proficient worker in the sector. This Health and Safety in Construction Bundle consists of the following 30 CPD Accredited Premium courses - Course 01 :Construction Management - Level 5 Diploma Course 02 :Construction Site Planning and Managment Course 03 :Construction Cost Estimation Diploma Course 04 :Construction Safety Diploma Course 05 :Construction Industry Scheme (CIS) Course 06 :Quantity Surveyor Training Course 07 :Building Surveyor Course 08 :Land Surveying Course 09 :Property Management Training Course 10 :Property Development Diploma Course 11 :Property Law Course 12 :Property Business Training - Level 5 Course 13 :Residential Property Sales Course 14 :Public Housing Management Course 15 :WELL Building Standard Course 16 :Building Design And Construction With LEED V4.1 Course 17 :AutoCAD VBA Programming for Beginners Course 18 :AutoCAD Programming using C# with Windows Forms Course 19 :Cost Control and Management Training Course 20 :Positive Workplace Environment Course 21 :Effective Communication Skills for Technical People Course 22 :Leadership Styles Course 23 :Workplace First Aid Level 3 Course 24 :Workplace Management Training Course 25: COSHH Training for Assessors Course 26: LOLER Training Level 2 Course 27: RIDDOR Training Course 28: Working at Height Course 29: Lone Worker Safety Diploma Course 30: Ladder Safety Training 10 Extraordinary Career Oriented courses that will assist you in reimagining your thriving techniques- Course 01 :Career Development Plan Fundamentals Course 02 :CV Writing and Job Searching Course 03 :Interview Skills: Ace the Interview Course 04 :Video Job Interview for Job Seekers Course 05 :Create a Professional LinkedIn Profile Course 06 :Business English Perfection Course Course 07 :Networking Skills for Personal Success Course 08 :Boost Your Confidence and Self-Esteem Course 09 :Public Speaking Training Course 10 :Learn to Fight Procrastination Learning Outcome This tailor-made Health and Safety in Construction bundle will allow you to- Uncover your skills and aptitudes to break new ground in the related fields Deep dive into the fundamental knowledge Acquire some hard and soft skills in this area Gain some transferable skills to elevate your performance Maintain good report with your clients and staff Gain necessary office skills and be tech savvy utilising relevant software Keep records of your work and make a report Know the regulations around this area Reinforce your career with specific knowledge of this field Know your legal and ethical responsibility as a professional in the related field This Health and Safety in Construction Bundle resources were created with the help of industry experts, and all subject-related information is kept updated on a regular basis to avoid learners from falling behind on the latest developments. Certification After studying the complete training you will be able to take the assessment. After successfully passing the assessment you will be able to claim all courses pdf certificates and 1 hardcopy certificate for the Title Course completely free. Other Hard Copy certificates need to be ordered at an additional cost of •8. CPD 400 CPD hours / points Accredited by CPD Quality Standards Who is this course for? Ambitious learners who want to strengthen their CV for their desired job should take advantage of the Health and Safety in Construction bundle! This bundle is also ideal for professionals looking for career advancement. Note: This is not a regulated course. To get a professional qualification, you may like to choose: Health and Safety Management for Construction (UK) Level 3 Certificate in Occupational Health and Safety NEBOSH National Diploma in Occupational Health and Safety NEBOSH National General Certificate in Occupational Health & Safety NEBOSH, International General Certificate in Occupational Health & Safety Level 6 Diploma - Occupational Health and Safety Management Courses from the Institution of Occupational Safety and Health ProQual Level 5 NVQ Diploma in Occupational Health and Safety Practice ProQual Level 6 NVQ Diploma in Occupational Health and Safety Practice ISO 45001 Occupational Health and Safety National Examination Board in Occupational Safety and Health Level 3 NVQ Health and Safety Requirements To participate in this course, all you need is - A smart device A secure internet connection And a keen interest in Health and Safety in Construction Career path Upon completing this essential Bundle, you will discover a new world of endless possibilities. These courses will help you to get a cut above the rest and allow you to be more efficient in the relevant fields.
Risk Assessment, Measurement & Management in Occupational Settings
(1)By Empower UK Employment Training
Risk Assessment, Measurement & Management in Occupational Settings Apply advanced knowledge of risk assessment, measurement techniques, and management strategies to improve occupational safety across diverse workplaces with this incredible Risk Assessment, Measurement & Management Online Course. Learning Outcomes: Define the key components of a Risk Assessment in an occupational setting. Explain the importance of Risk Assessment in maintaining workplace safety. Conduct a basic Risk Assessment using a given template in a simulated occupational environment. Differentiate between qualitative and quantitative methods in Risk Assessment. Assess the effectiveness of various Risk Assessment tools and methodologies in different occupational settings. Develop a comprehensive Risk Assessment plan tailored to a specific occupational setting. Utilise Key Risk Indicators (KRIs) to monitor risks. Interpret data from a Risk Heat Map to prioritise risks Formulate risk mitigation strategies based on the findings of a Risk Assessment. More Benefits: LIFETIME access Device Compatibility Free Workplace Management Toolkit This Risk Assessment course will teach you how to apply advanced knowledge of risk assessment, measurement techniques, and management strategies to improve occupational safety across diverse workplaces. Risk Identification and Assessment: Utilise a Risk Register and Heat Map for effective Risk Assessment. Risk Measurement and Quantification: Collect data and estimate losses using KRIs for targeted Risk Assessment. Risk Mitigation Strategies: Implement Root Cause Analysis and governance for focused Risk Assessment. Risk Financing and Risk Transfer: Master Risk Retention and Transfer techniques for optimal Risk Assessment. Operational Risk Management Framework: Create and integrate an ORMF for aligned Risk Assessment.
24 Hour Flash Deal **25-in-1 Certificate in Construction Health and Safety Mega Bundle** Certificate in Construction Health and Safety Enrolment Gifts **FREE PDF Certificate**FREE PDF Transcript ** FREE Exam** FREE Student ID ** Lifetime Access **FREE Enrolment Letter ** Take the initial steps toward a successful long-term career by studying the Certificate in Construction Health and Safety package online with Studyhub through our online learning platform. The Certificate in Construction Health and Safety bundle can help you improve your CV, wow potential employers, and differentiate yourself from the mass. This Certificate in Construction Health and Safety course provides complete 360-degree training on Certificate in Construction Health and Safety. You'll get not one, not two, not three, but twenty-five Certificate in Construction Health and Safety courses included in this course. Plus Studyhub's signature Forever Access is given as always, meaning these Certificate in Construction Health and Safety courses are yours for as long as you want them once you enrol in this course This Certificate in Construction Health and Safety Bundle consists the following career oriented courses: Course 01: Construction Safety Training Certificate Course 02: Falls and Injury Prevention Specialist Certification Course 03: Workplace Health and Safety Advanced Diploma Course 04: Occupational Safety and Incident Management Course 05: Fire Safety Course 06: First Aid at Work Course 07: Manual Handling Training Course 08: COSHH Training Course 09: Driver Safety Awareness Course 10: PUWER Course 11: Environmental Health Course 12: Ladder Safety Training Course 13: Working in Confined Spaces Course 14: Safety & Precautions in Medication Management Course 15: Cryotherapy Training Course Course 16: Respiratory Protection and Safety Training Course Course 17: Hand-arm Vibration and HAVS Training Course Certificate Course 18: Personal Hygiene Course 19: Site Management Safety Training Scheme (SMSTS) Course 20: Risk Assessment & Management Course 21: Safety Awareness 101 for New Employee Course 22: Evacuation Procedures Training Course 23: Facilities Management Course 24: Environmental Impact Assessment: Evaluating Sustainability Course 25: Public Health The Certificate in Construction Health and Safety course has been prepared by focusing largely on Certificate in Construction Health and Safety career readiness. It has been designed by our Certificate in Construction Health and Safety specialists in a manner that you will be likely to find yourself head and shoulders above the others. For better learning, one to one assistance will also be provided if it's required by any learners. The Certificate in Construction Health and Safety Bundle is one of the most prestigious training offered at StudyHub and is highly valued by employers for good reason. This Certificate in Construction Health and Safety bundle course has been created with twenty-five premium courses to provide our learners with the best learning experience possible to increase their understanding of their chosen field. This Certificate in Construction Health and Safety Course, like every one of Study Hub's courses, is meticulously developed and well researched. Every one of the topics is divided into Certificate in Construction Health and Safety Elementary modules, allowing our students to grasp each lesson quickly. The Certificate in Construction Health and Safety course is self-paced and can be taken from the comfort of your home, office, or on the go! With our Student ID card you will get discounts on things like music, food, travel and clothes etc. In this exclusive Certificate in Construction Health and Safety bundle, you really hit the jackpot. Here's what you get: Step by step Certificate in Construction Health and Safety lessons One to one assistance from Certificate in Construction Health and Safety professionals if you need it Innovative exams to test your knowledge after the Certificate in Construction Health and Safety course 24/7 customer support should you encounter any hiccups Top-class learning portal Unlimited lifetime access to all twenty-five Certificate in Construction Health and Safety courses Digital Certificate, Transcript and student ID are all included in the price PDF certificate immediately after passing Original copies of your Certificate in Construction Health and Safety certificate and transcript on the next working day Easily learn the Certificate in Construction Health and Safety skills and knowledge you want from the comfort of your home This Construction Safety course acts as a starting point for individuals interested in various topics and programmes: Health and Safety Management for Construction (UK) NEBOSH National Certificate in Construction Health and Safety Level 1 Award in Health and Safety within a Construction Environment (RQF) Level 1 Award in Health and Safety in a Construction Environment - Health and Safety in Construction - for the CSCS Green Card ISO 45001 Occupational Health and Safety Level 6 Diploma Occupational Health and Safety Management CITB Site Management Safety Training Scheme (SMSTS) Level 2 Award in Fire Safety Institution of Occupational Safety and Health CPD 250 CPD hours / points Accredited by CPD Quality Standards Who is this course for? This Certificate in Construction Health and Safety training is suitable for - Students Recent graduates Job Seekers Individuals who are already employed in the relevant sectors and wish to enhance their knowledge and expertise in Certificate in Construction Health and Safety Please Note: Studyhub is a Compliance Central approved resale partner for Quality Licence Scheme Endorsed courses. Requirements To participate in this Certificate in Construction Health and Safety course, all you need is - A smart device A secure internet connection And a keen interest in Certificate in Construction Health and Safety Career path You will be able to kickstart your Certificate in Construction Health and Safety career because this course includes various courses as a bonus. This Certificate in Construction Health and Safety is an excellent opportunity for you to learn multiple skills from the convenience of your own home and explore Certificate in Construction Health and Safety career opportunities. Certificates CPD Accredited Certificate Digital certificate - Included CPD Accredited e-Certificate - Free CPD Accredited Hardcopy Certificate - Free Enrolment Letter - Free Student ID Card - Free
