Nottinghamshire

Course information&nbsp;It is envisaged that by the end of this course of training the trainee operator will be able to answer questions on and perform the following:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as a plant operator.</li><li fr-original-style="" style="box-sizing: border-box;">Have a working knowledge of the manufacturer&rsquo;s handbook for the machine to be used and be familiar with other types of information sources and relevant legislation.</li><li fr-original-style="" style="box-sizing: border-box;">Be able to locate and identify steering, driving and braking controls and explain their functions conduct all pre-operational checks in accordance with manufacturers and legislative requirements and check all emergency lowering functions.</li><li fr-original-style="" style="box-sizing: border-box;">Safely mount and dismount the machine configure the machine for travel.</li><li fr-original-style="" style="box-sizing: border-box;">Configure the machine for travel and maneuver it safely on level/rough ground and inclines in open and confined areas.</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all necessary safety checks at the work area, including overhead and underground hazards maneuver the machine to work the area and correctly configure in readiness to carry out accessing tasks at various points up to full operating height.</li><li fr-original-style="" style="box-sizing: border-box;">Travel with platform raised (where applicable)</li><li fr-original-style="" style="box-sizing: border-box;">Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation.</li><li fr-original-style="" style="box-sizing: border-box;">Carry out all end of shift and shut down procedures.</li></ul>Entry requirements&nbsp;In order to be eligible to undertake NPORS testing.Good understanding of spoken and written English.__________________________________________________________________________________Assessment&nbsp;Assessment will be to NPORS standards consisting of a theory test and practical test. &nbsp;CertificationNPORS Traditional card &ndash;&nbsp;With the traditional card there is no requirements to complete an NVQ, a five-year card is issued and after five years reassessment is required.&nbsp;NPORS CSCS &ndash;&nbsp;To ensure that the operator can receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant.&nbsp;

Course information 
It is envisaged that by the end of this course of training the trainee operator will be able to answer questions on and perform the following:
Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as a plant operator.
Have a working knowledge of the manufacturer’s handbook for the machine to be used and be familiar with other types of information sources and relevant legislation.
Be able to locate and identify steering, driving and braking controls and explain their functions conduct all pre-operational checks in accordance with manufacturers and legislative requirements and check all emergency lowering functions.
Safely mount and dismount the machine configure the machine for travel.
Configure the machine for travel and maneuver it safely on level/rough ground and inclines in open and confined areas.
Conduct all necessary safety checks at the work area, including overhead and underground hazards maneuver the machine to work the area and correctly configure in readiness to carry out accessing tasks at various points up to full operating height.
Travel with platform raised (where applicable)
Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation.
Carry out all end of shift and shut down procedures.
Entry requirements 
In order to be eligible to undertake NPORS testing.
Good understanding of spoken and written English.
__________________________________________________________________________________
Assessment 
Assessment will be to NPORS standards consisting of a theory test and practical test. 
Certification
NPORS Traditional card – With the traditional card there is no requirements to complete an NVQ, a five-year card is issued and after five years reassessment is required. 
NPORS CSCS – To ensure that the operator can receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant. 

Dynamic Training and Assessments Ltd

Construction

CSCS (Construction Skills Certification Scheme)

NPORS

NPORS MEWP Boom (N108)

Aberdeen

Castleford

Exeter

Glasgow

Heathrow

Manchester

Middlesbrough

Rainham

Southampton

Wellingborough

This course is aimed at anyone who has to undertake manual handling duties as part of their work routine, and will give the delegates a basic understanding of the correct manual handling techniques when moving, handling and lifting of loads.Book via our website @&nbsp;<a href="https://www.vp-ess.com/training/workplace-safety/manual-handling-awareness/" id="isPasted" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">ESS | Training Courses | Vp ESS (vp-ess.com)</a>

This course is aimed at anyone who has to undertake manual handling duties as part of their work routine, and will give the delegates a basic understanding of the correct manual handling techniques when moving, handling and lifting of loads.
Book via our website @ ESS | Training Courses | Vp ESS (vp-ess.com)
or via email at: esstrainingsales@vpplc.com
or phone on: 0800 000 346

Vp ESS Training

Construction Safety

Manual Handling

Risk Management

Lifting

Health & Safety

Health & Safety At Work

Safety Awareness

This course is aimed at anyone who has to undertake manual handling duties as part of their work routine, and will give the delegates a basic understanding of the correct manual handling techniques when moving, handling and lifting of loads.

Book via our website @ ESS | Training Courses | Vp ESS (vp-ess.com)

or via email at: esstrainingsales@vpplc.com

or phone on: 0800 000 346


Manual Handling Awareness

General admission

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Overview</h2>This course is aimed at candidates that require the knowledge and practical skills to operate a industrial counterbalance lift truck.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Course Content</h2>Candidates will be able to:<ul style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><li fr-original-style="" style="box-sizing: border-box;">Understand the industry, the dangers of working in the industry and their responsibilities as a plant operator</li><li fr-original-style="" style="box-sizing: border-box;">Understand the manufacturer&rsquo;s handbook for the particular machine to be used</li><li fr-original-style="" style="box-sizing: border-box;">Locate and identify the major components of the machine and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Locate and identify steering, driving and braking controls and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all pre-operational checks in accordance with manufacturer&rsquo;s and legislative requirements</li><li fr-original-style="" style="box-sizing: border-box;">Safely mount and dismount the machine</li><li fr-original-style="" style="box-sizing: border-box;">Start and stop the engine and safely move the machine off and stop it safely</li><li fr-original-style="" style="box-sizing: border-box;">Configure the machine for travel and manoeuvre it safely laden and unladen, in open and confined areas</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all necessary safety checks at the work area</li><li fr-original-style="" style="box-sizing: border-box;">Manoeuvre the machine to the work area and correctly configure in readiness to carry out lifting and load handling tasks</li><li fr-original-style="" style="box-sizing: border-box;">Carry out lifting and load handling tasks</li><li fr-original-style="" style="box-sizing: border-box;">Lift and transfer loads accurately and safely at different locations</li><li fr-original-style="" style="box-sizing: border-box;">Load and unload external transport safely</li><li fr-original-style="" style="box-sizing: border-box;">Fit, adjust and or remove attachments</li><li fr-original-style="" style="box-sizing: border-box;">Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation</li><li fr-original-style="" style="box-sizing: border-box;">Carry out all end of shift and shut down procedures</li></ul><div style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><h2 fr-original-style="" style="box-sizing: border-box;">Entry Requirements</h2></div>NPORS CSCS &ndash; Candidates must have achieved the relevant CITB Health, Safety &amp; Environment (HS&amp;E) touch-screen-test within 2 years.Good understanding of spoken and written English.<div style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><h2 fr-original-style="" style="box-sizing: border-box;">Duration</h2></div>Novice course- 5 days depending on experienceExperienced worker tests- 1 day theory and practical assessment<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Location</h2>Customer Site (Training &amp; Testing) &ndash; Site must adhere to NPORS specifications

Overview
This course is aimed at candidates that require the knowledge and practical skills to operate a industrial counterbalance lift truck.
Course Content
Candidates will be able to:
Understand the industry, the dangers of working in the industry and their responsibilities as a plant operator
Understand the manufacturer’s handbook for the particular machine to be used
Locate and identify the major components of the machine and explain their functions
Locate and identify steering, driving and braking controls and explain their functions
Conduct all pre-operational checks in accordance with manufacturer’s and legislative requirements
Safely mount and dismount the machine
Start and stop the engine and safely move the machine off and stop it safely
Configure the machine for travel and manoeuvre it safely laden and unladen, in open and confined areas
Conduct all necessary safety checks at the work area
Manoeuvre the machine to the work area and correctly configure in readiness to carry out lifting and load handling tasks
Carry out lifting and load handling tasks
Lift and transfer loads accurately and safely at different locations
Load and unload external transport safely
Fit, adjust and or remove attachments
Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation
Carry out all end of shift and shut down procedures
Entry Requirements
NPORS CSCS – Candidates must have achieved the relevant CITB Health, Safety & Environment (HS&E) touch-screen-test within 2 years.
Good understanding of spoken and written English.
Duration
Novice course- 5 days depending on experience
Experienced worker tests- 1 day theory and practical assessment
Location
Customer Site (Training & Testing) – Site must adhere to NPORS specifications

Lifting Operations & Lifting Equipment Regulations (LOLER)

Site Management Safety Training Scheme (SMSTS)

NEBOSH

Overhead Crane Operator

FLT (Fork Lift Truck Driving License)

Lifting Operations

NPORS Industrial Counterbalance Lift Truck (N001)

The Level 2 NVQ Diploma in Construction Plant or Machinery Maintenance qualification has been developed for achievement in a real workplace environment which means you need to be employed to undertake this qualification. This qualification enables you, the learner, to demonstrate and recognise your skills, knowledge and understanding and to demonstrate your competence in a real workplace environment so you can work as a Plant Mechanic within the construction industry. You will be assessed against a set of performance and knowledge statements which have been derived from National Occupational Standards for your occupational area. You will be assessed by an occupationally competent and qualified assessor whose job is to work with you and help you complete your qualification. This qualification supports the learner to attain enabling, fundamental and transferable practical skills with associated underpinning knowledge. The learner will learn key practical skills and knowledge in these mandatory units:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;"> -Conforming to General Health, Safety and Welfare in the Workplace -Conforming to Productive Working Practices in the Workplace -Moving, Handling and Storing Resources in the Workplace -Operating Plant or Machinery for Non-operational Activities in the Workplace -Servicing Plant or Machinery in the workplace -Removing and Replacing Plant or Machinery Components to Replace Worn, Damaged or Faulty Parts in the Workplace -Dismantling and Assembling Plant or Machinery Components to Replace Worn, Damaged or Faulty Parts in the Workplace -Diagnosing Faults in Plant or Machinery Systems or Components in the Workplace -Inspecting Plant or Machinery for Operational Serviceability in the Workplace. The learner will also learn key practical skills and knowledge in two of the following optional units:</li><li fr-original-style="" style="box-sizing: border-box;"> -Installing, Repairing or Modifying Construction Resources by Heating, Welding, Brazing, Soldering and Thermal Cutting in the Workplace -Producing One-off Components to Restore or Maintain the Operational Functions of Plant or Machinery in the Workplace -Installing Plant or Machinery for Operational Activities in the Workplace -Configuring Plant or Machinery for Specific Operational Activities in the Workplace -Handing Over Plant or Machinery to the Control of Others in the Workplace -Carrying Out Specific Tests on Plant or Machinery to Determine Operational Serviceability in the Workplace.</li></ul>

The Level 2 NVQ Diploma in Construction Plant or Machinery Maintenance qualification has been developed for achievement in a real workplace environment which means you need to be employed to undertake this qualification.

This qualification enables you, the learner, to demonstrate and recognise your skills, knowledge and understanding and to demonstrate your competence in a real workplace environment so you can work as a Plant Mechanic within the construction industry.

You will be assessed against a set of performance and knowledge statements which have been derived from National Occupational Standards for your occupational area. You will be assessed by an occupationally competent and qualified assessor whose job is to work with you and help you complete your qualification.

This qualification supports the learner to attain enabling, fundamental and transferable practical skills with associated underpinning knowledge.


The learner will learn key practical skills and knowledge in these mandatory units:
-Conforming to General Health, Safety and Welfare in the Workplace
-Conforming to Productive Working Practices in the Workplace
-Moving, Handling and Storing Resources in the Workplace
-Operating Plant or Machinery for Non-operational Activities in the Workplace
-Servicing Plant or Machinery in the workplace
-Removing and Replacing Plant or Machinery Components to Replace Worn, Damaged or Faulty Parts in the Workplace
-Dismantling and Assembling Plant or Machinery Components to Replace Worn, Damaged or Faulty Parts in the Workplace
-Diagnosing Faults in Plant or Machinery Systems or Components in the Workplace
-Inspecting Plant or Machinery for Operational Serviceability in the Workplace.

The learner will also learn key practical skills and knowledge in two of the following optional units:
-Installing, Repairing or Modifying Construction Resources by Heating, Welding, Brazing, Soldering and Thermal Cutting in the Workplace
-Producing One-off Components to Restore or Maintain the Operational Functions of Plant or Machinery in the Workplace
-Installing Plant or Machinery for Operational Activities in the Workplace
-Configuring Plant or Machinery for Specific Operational Activities in the Workplace
-Handing Over Plant or Machinery to the Control of Others in the Workplace
-Carrying Out Specific Tests on Plant or Machinery to Determine Operational Serviceability in the Workplace.

Level 2 NVQ Diploma in Construction Plant or Machinery Maintenance

Course Overview<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">The Level 2 NVQ Certificate in Plant Operations (Construction) -Cranes and Specialist Lifting qualification has been developed for achievement in a real workplace environment which means you need to be employed to undertake this qualification. This qualification enables you, the learner, to demonstrate and recognise your skills, knowledge and understanding and to demonstrate your competence in a real workplace environment so you can work in Cranes and Specialist Lifting within the construction industry. You will be assessed against a set of performance and knowledge statements which have been derived from National Occupational Standards for your occupational area. You will be assessed by an occupationally competent and qualified assessor whose job is to work with you and help you complete your qualification. This qualification supports the learner to attain enabling, fundamental and transferable practical skills with associated underpinning knowledge. The learner will learn key practical skills and knowledge in these mandatory units:</li><li fr-original-style="" style="box-sizing: border-box;"> -Conforming to General Health, Safety and Welfare in the Workplace -Conforming to Productive Working Practices in the Workplace The learner will also learn key practical skills and knowledge in one of the following optional units:</li><li fr-original-style="" style="box-sizing: border-box;"> -Preparing and operating compact cranes to lift and transfer loads in the workplace -Preparing and operating overhead cranes to lift and transfer loads in the workplace -Preparing and operating excavator cranes to lift and transfer loads in the workplace -Preparing and operating hoists to lift and transfer loads in the workplace -Preparing and operating lorry loaders or knuckle booms to lift and transfer loads in the workplace -Preparing and operating skip handlers to lift and transfer loads in the workplace -Preparing and operating container handlers to lift and transfer loads in the workplace -Preparing and operating self-propelled modular transporters -SPMT -to lift and transfer loads in the workplace -Preparing and operating ergonomic manipulating machines to lift and transfer loads in the workplace -Preparing and operating remote controlled tower cranes to lift and transfer loads in the workplace.</li></ul><h3 style="color: rgb(0, 43, 81); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 43, 81);">Entry Requirements</h3><div style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">There are no formal entry requirements to take this qualification. This qualification can be undertaken without any previous training or qualifications in this subject area.</div>

Course Overview
The Level 2 NVQ Certificate in Plant Operations (Construction) -Cranes and Specialist Lifting qualification has been developed for achievement in a real workplace environment which means you need to be employed to undertake this qualification.

This qualification enables you, the learner, to demonstrate and recognise your skills, knowledge and understanding and to demonstrate your competence in a real workplace environment so you can work in Cranes and Specialist Lifting within the construction industry.

You will be assessed against a set of performance and knowledge statements which have been derived from National Occupational Standards for your occupational area. You will be assessed by an occupationally competent and qualified assessor whose job is to work with you and help you complete your qualification.

This qualification supports the learner to attain enabling, fundamental and transferable practical skills with associated underpinning knowledge.

The learner will learn key practical skills and knowledge in these mandatory units:
-Conforming to General Health, Safety and Welfare in the Workplace
-Conforming to Productive Working Practices in the Workplace

The learner will also learn key practical skills and knowledge in one of the following optional units:
-Preparing and operating compact cranes to lift and transfer loads in the workplace
-Preparing and operating overhead cranes to lift and transfer loads in the workplace
-Preparing and operating excavator cranes to lift and transfer loads in the workplace
-Preparing and operating hoists to lift and transfer loads in the workplace
-Preparing and operating lorry loaders or knuckle booms to lift and transfer loads in the workplace
-Preparing and operating skip handlers to lift and transfer loads in the workplace
-Preparing and operating container handlers to lift and transfer loads in the workplace
-Preparing and operating self-propelled modular transporters -SPMT -to lift and transfer loads in the workplace
-Preparing and operating ergonomic manipulating machines to lift and transfer loads in the workplace
-Preparing and operating remote controlled tower cranes to lift and transfer loads in the workplace.
Entry Requirements
There are no formal entry requirements to take this qualification. This qualification can be undertaken without any previous training or qualifications in this subject area.

Level 2 NVQ Certificate in Plant Operations - Cranes and Specialist Lifting

The Level 2 NVQ Diploma in Piling Operations-Piling Operations qualification has been developed for achievement in a real workplace environment which means you need to be employed to undertake this qualification. This qualification enables you, the learner, to demonstrate and recognise your skills, knowledge and understanding and to demonstrate your competence in a real workplace environment so you can work in Piling Operations within the construction industry. You will be assessed against a set of performance and knowledge statements which have been derived from National Occupational Standards for your occupational area. You will be assessed by an occupationally competent and qualified assessor whose job is to work with you and help you complete your qualification. This qualification supports the learner to attain enabling, fundamental and transferable practical skills with associated underpinning knowledge. The learner will learn key practical skills and knowledge in these mandatory units:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;"> -Contributing to the Piling Operation in the Workplace -Slinging and hand signalling the movement of suspended loads in the workplace -Conforming to General Health, Safety and Welfare in the Workplace -Conforming to Productive Working Practices in the Workplace -Moving, Handling and Storing Resources in the Workplace The learner will also learn key practical skills and knowledge in one of the following optional units:</li><li fr-original-style="" style="box-sizing: border-box;"> -Allocating and Monitoring the Use of Plant, Machinery or Equipment in the Workplace -Carrying out mud, slurry or fluid plant operations in the workplace -Carrying Out Tremie Operations in the Workplace -Guiding the Piling Rig for the Formation of Piles in the Workplace -Preparing and operating 180 degree excavators to extract and excavate ground and loose materials in the workplace -Preparing and operating wheeled loading shovels to extract loose materials in the workplace -Preparing and operating tracked loading shovels to extract ground and lose materials in the workplace -Preparing and operating skid steer loaders to extract loose materials in the workplace -Preparing and operating 360 degree excavators to extract ground, face and/or loose materials in the workplace -Preparing and operating powered units, tools or pedestrian plant, machinery or equipment in the workplace</li></ul><h3 style="color: rgb(0, 43, 81); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 43, 81);">Entry Requirements</h3><div style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">There are no formal entry requirements to take this qualification. This qualification can be undertaken without any previous training or qualifications in this subject area.</div>

The Level 2 NVQ Diploma in Piling Operations-Piling Operations qualification has been developed for achievement in a real workplace environment which means you need to be employed to undertake this qualification.

This qualification enables you, the learner, to demonstrate and recognise your skills, knowledge and understanding and to demonstrate your competence in a real workplace environment so you can work in Piling Operations within the construction industry.

You will be assessed against a set of performance and knowledge statements which have been derived from National Occupational Standards for your occupational area. You will be assessed by an occupationally competent and qualified assessor whose job is to work with you and help you complete your qualification.

This qualification supports the learner to attain enabling, fundamental and transferable practical skills with associated underpinning knowledge.

The learner will learn key practical skills and knowledge in these mandatory units:
-Contributing to the Piling Operation in the Workplace
-Slinging and hand signalling the movement of suspended loads in the workplace
-Conforming to General Health, Safety and Welfare in the Workplace
-Conforming to Productive Working Practices in the Workplace
-Moving, Handling and Storing Resources in the Workplace

The learner will also learn key practical skills and knowledge in one of the following optional units:
-Allocating and Monitoring the Use of Plant, Machinery or Equipment in the Workplace
-Carrying out mud, slurry or fluid plant operations in the workplace
-Carrying Out Tremie Operations in the Workplace
-Guiding the Piling Rig for the Formation of Piles in the Workplace
-Preparing and operating 180 degree excavators to extract and excavate ground and loose materials in the workplace
-Preparing and operating wheeled loading shovels to extract loose materials in the workplace
-Preparing and operating tracked loading shovels to extract ground and lose materials in the workplace
-Preparing and operating skid steer loaders to extract loose materials in the workplace
-Preparing and operating 360 degree excavators to extract ground, face and/or loose materials in the workplace
-Preparing and operating powered units, tools or pedestrian plant, machinery or equipment in the workplace
Entry Requirements
There are no formal entry requirements to take this qualification. This qualification can be undertaken without any previous training or qualifications in this subject area.

Level 2 Diploma in Piling Operations - Piling Rig Operator

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Overview</h2>This course is aimed at candidates that require the knowledge and practical skills to operate a Telescopic Handler to move and transport loads at various heights safely and efficiently.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Course Content</h2>Candidates will be able to:<ul style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><li fr-original-style="" style="box-sizing: border-box;">Understanding the industry, the dangers of working in the industry and their responsibilities as a plant operator</li><li fr-original-style="" style="box-sizing: border-box;">Understand the manufacturer&rsquo;s handbook for the particular machine to be used and other relevant sources of information</li><li fr-original-style="" style="box-sizing: border-box;">Locate and identify the major components of the machine and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Locate and identify steering, driving and braking controls and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all pre-operational checks in accordance with manufacturer&rsquo;s and legislative requirements</li><li fr-original-style="" style="box-sizing: border-box;">Safely mount and dismount the machine</li><li fr-original-style="" style="box-sizing: border-box;">Start and stop the engine and safely move the machine off and stop it safely</li><li fr-original-style="" style="box-sizing: border-box;">Configure the machine for travel and manoeuvre it safely laden and unladen, over varying terrain, rough ground, inclines, in open and confined areas</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all necessary safety checks at the work area</li><li fr-original-style="" style="box-sizing: border-box;">Manoeuvre the machine to the work area and correctly configure in readiness to carry out lifting and load handling tasks</li><li fr-original-style="" style="box-sizing: border-box;">Carry out lifting and load handling tasks</li><li fr-original-style="" style="box-sizing: border-box;">Lift and transfer loads accurately and safely at different locations</li><li fr-original-style="" style="box-sizing: border-box;">Load and unload external transport safely</li><li fr-original-style="" style="box-sizing: border-box;">Fit, adjust and or remove attachments</li><li fr-original-style="" style="box-sizing: border-box;">Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation</li><li fr-original-style="" style="box-sizing: border-box;">Carry out all end of shift and shut down procedures</li></ul><div style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><h2 fr-original-style="" style="box-sizing: border-box;">Entry Requirements</h2></div>NPORS CSCS &ndash; Candidates must have achieved the relevant CITB Health, Safety &amp; Environment (HS&amp;E) touch-screen-test within 2 years.Good understanding of spoken and written English.<div style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><h2 fr-original-style="" style="box-sizing: border-box;">Duration</h2></div>Novice course- 5 days depending on experienceExperienced worker tests- 1 day theory and practical assessment<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Location</h2>Customer Site (Training &amp; Testing) &ndash; Site must adhere to NPORS specifications

Overview
This course is aimed at candidates that require the knowledge and practical skills to operate a Telescopic Handler to move and transport loads at various heights safely and efficiently.
Course Content
Candidates will be able to:
Understanding the industry, the dangers of working in the industry and their responsibilities as a plant operator
Understand the manufacturer’s handbook for the particular machine to be used and other relevant sources of information
Locate and identify the major components of the machine and explain their functions
Locate and identify steering, driving and braking controls and explain their functions
Conduct all pre-operational checks in accordance with manufacturer’s and legislative requirements
Safely mount and dismount the machine
Start and stop the engine and safely move the machine off and stop it safely
Configure the machine for travel and manoeuvre it safely laden and unladen, over varying terrain, rough ground, inclines, in open and confined areas
Conduct all necessary safety checks at the work area
Manoeuvre the machine to the work area and correctly configure in readiness to carry out lifting and load handling tasks
Carry out lifting and load handling tasks
Lift and transfer loads accurately and safely at different locations
Load and unload external transport safely
Fit, adjust and or remove attachments
Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation
Carry out all end of shift and shut down procedures
Entry Requirements
NPORS CSCS – Candidates must have achieved the relevant CITB Health, Safety & Environment (HS&E) touch-screen-test within 2 years.
Good understanding of spoken and written English.
Duration
Novice course- 5 days depending on experience
Experienced worker tests- 1 day theory and practical assessment
Location
Customer Site (Training & Testing) – Site must adhere to NPORS specifications

NPORS Telescopic Handler (N010)

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Overview</h2>This course is aimed at candidates that require the knowledge and practical skills to operate mobile elevating work platforms (scissor lifts) safely and efficiently while carrying out work at heights.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Course Content</h2>Candidates will be able to:<ul style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><li fr-original-style="" style="box-sizing: border-box;">Understanding the industry, the dangers of working in the industry and their responsibilities as a plant operator</li><li fr-original-style="" style="box-sizing: border-box;">Understand the manufacturer&rsquo;s handbook for the particular machine to be used, and be familiar with other types of information sources and relevant legislation</li><li fr-original-style="" style="box-sizing: border-box;">Locate and identify the major components of the machine and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Locate and identify steering, driving and braking controls and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all pre-operational checks in accordance with manufacturer&rsquo;s and legislative requirements</li><li fr-original-style="" style="box-sizing: border-box;">Check all emergency lowering functions</li><li fr-original-style="" style="box-sizing: border-box;">Safely mount and dismount the machine</li><li fr-original-style="" style="box-sizing: border-box;">Configure the machine for travel</li><li fr-original-style="" style="box-sizing: border-box;">Configure the machine for travel and manoeuvre it safely on level ground and inclines in open and confined areas</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all necessary safety checks at the work area, including overhead and underground hazards</li><li fr-original-style="" style="box-sizing: border-box;">Manoeuvre the machine to the work area and correctly configure in readiness to carry out accessing tasks</li><li fr-original-style="" style="box-sizing: border-box;">Carry out accessing tasks, at various points up to full operating height</li><li fr-original-style="" style="box-sizing: border-box;">Travel with platform raised (where applicable)</li><li fr-original-style="" style="box-sizing: border-box;">Use platform extension section</li><li fr-original-style="" style="box-sizing: border-box;">Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation</li><li fr-original-style="" style="box-sizing: border-box;">Carry out all end of shift and shut down procedures</li></ul><div style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><h2 fr-original-style="" style="box-sizing: border-box;">Entry Requirements</h2></div>NPORS CSCS &ndash; Candidates must have achieved the relevant CITB Health, Safety &amp; Environment (HS&amp;E) touch-screen-test within 2 years.Good understanding of spoken and written English.<div style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><h2 fr-original-style="" style="box-sizing: border-box;">Duration</h2></div>Novice course- 5 days depending on experienceExperienced worker tests- 1 day theory and practical assessment<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Location</h2>Customer Site (Training &amp; Testing) &ndash; Site must adhere to NPORS specifications

Overview
This course is aimed at candidates that require the knowledge and practical skills to operate mobile elevating work platforms (scissor lifts) safely and efficiently while carrying out work at heights.
Course Content
Candidates will be able to:
Understanding the industry, the dangers of working in the industry and their responsibilities as a plant operator
Understand the manufacturer’s handbook for the particular machine to be used, and be familiar with other types of information sources and relevant legislation
Locate and identify the major components of the machine and explain their functions
Locate and identify steering, driving and braking controls and explain their functions
Conduct all pre-operational checks in accordance with manufacturer’s and legislative requirements
Check all emergency lowering functions
Safely mount and dismount the machine
Configure the machine for travel
Configure the machine for travel and manoeuvre it safely on level ground and inclines in open and confined areas
Conduct all necessary safety checks at the work area, including overhead and underground hazards
Manoeuvre the machine to the work area and correctly configure in readiness to carry out accessing tasks
Carry out accessing tasks, at various points up to full operating height
Travel with platform raised (where applicable)
Use platform extension section
Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation
Carry out all end of shift and shut down procedures
Entry Requirements
NPORS CSCS – Candidates must have achieved the relevant CITB Health, Safety & Environment (HS&E) touch-screen-test within 2 years.
Good understanding of spoken and written English.
Duration
Novice course- 5 days depending on experience
Experienced worker tests- 1 day theory and practical assessment
Location
Customer Site (Training & Testing) – Site must adhere to NPORS specifications

NPORS MEWP Scissor Lift (N109)

Loughborough

<div>
		

		<div>
			
			Resilience is the ability to take the challenges and changes of life in your stride and say yes to the opportunities that excite you.

			<div> 2 x 180mins</div>
			<div> £445.00 incl. VAT</div>
			
			
		</div>
	</div>

	

	<div id="filters">
		
		
	</div>

	

 <div>

		
		 
		

		<div></div>

		<div>
			Want to run this event in-house? Enquire about running this event in-house 
			
		</div>

		<div>
			Interested in attending? Have a suggestion about running this event near you? Register your interest now
			
		</div>
	</div>
	<div></div>
	
		
 <div>
			
		</div>
				

	
		<h3>Description</h3>
		<h4>Today's workforce demands a lot from leaders: to be purpose-driven, authentic, inclusive, visionary yet humble; to create a space of psychological safety for their people and to show up without the armour of hierarchy. These demands can create a significant emotional load on leaders who are facing into a tide of consumer and shareholder activism, disruptive change to business practices and endless cost focus. Now is the time to understand that working on our personal resilience is not a sign of weakness, but of strength.</h4>
<h4>Join this course to engage with other leaders in learning resilience habits that make a difference now and can serve you for a lifetime.</h4>
 
Available as private Face to Face and virtual sessions (max 12 delegates) - £1,745 Plus VAT

	
		<h3>Modules/Lessons</h3>
		<h3>Module 1: Your Personal Resilience Baseline, Strengths and Challenges</h3>
<ul>
<li>Self-awareness of your resilience level across seven categories &amp; baseline</li>
<li>Knowledge: The link between resilience and sustainable high performance</li>
<li>Knowledge: Inconvenient truths and empowering beliefs about resilience</li>
<li>Q&amp;A and signposts: to 30 small habits to build your resilience</li>
<li>Action planning: one behaviour you will implement, starting today.</li>
</ul>
<h3>Module 2: Turning Knowing into Doing</h3>
<ul>
<li>Self-awareness: The road to burnout is paved with good intentions</li>
<li>Skills: Aligning your actions with your core values</li>
<li>The courage, conviction and commitment to 'doing differently'</li>
<li>Q&amp;A and signposts: to a range of specific tools to build your confidence</li>
<li>Action planning: one behaviour you will implement, starting today.</li>
</ul>
<h3>Why now?</h3>
<div>
<ul>
<li>The pandemic has amplified existing resource pressure and accelerated change and uncertainty</li>
<li>The consequences of taking our health for granted, mentally, physically or emotionally are severe</li>
<li>Workplace stress has reached epidemic proportions in many regions across the globe</li>
<li>The cost of presenteeism is double the cost of absenteeism</li>
<li>Over two years of heightened pressure means many people are operating with lower personal capacity</li>
</ul>
<h3>Benefits?</h3>
Increase your capacity to take on new challenges, reduce existing stress and prepare yourself for unexpected adversity.
<h3>How?</h3>
<div>
<ul>
<li>Suitable for all leaders, everywhere</li>
<li>Resilience can be learned the easy way (taught) or the hard way (personal experience of adversity)</li>
<li>There are 7 categories of resilience, most people score very low on at least 2-3 categories</li>
<li>Having at least some resilience habits in every category means you have a tool for every situation</li>
<li>The resilience habits in the FREEDOM model are simple, powerful, fast, free and readily implemented</li>
<li>Tried-and-tested workshops, 3 to 4 hours tailored for Leaders and Executives</li>
<li>Stand-alone workshops or integrate into wider development programmes</li>
</ul>
</div>
</div>

Resilience is the ability to take the challenges and changes of life in your stride and say yes to the opportunities that excite you.

2 x 180mins £445.00 incl. VAT
Want to run this event in-house? Enquire about running this event in-house 
Interested in attending? Have a suggestion about running this event near you?
Register your interest now
Description

Today's workforce demands a lot from leaders: to be purpose-driven, authentic, inclusive, visionary yet humble; to create a space of psychological safety for their people and to show up without the armour of hierarchy. These demands can create a significant emotional load on leaders who are facing into a tide of consumer and shareholder activism, disruptive change to business practices and endless cost focus. Now is the time to understand that working on our personal resilience is not a sign of weakness, but of strength.Join this course to engage with other leaders in learning resilience habits that make a difference now and can serve you for a lifetime.
 
Available as private Face to Face and virtual sessions (max 12 delegates) - £1,745 Plus VAT

Modules/Lessons

Module 1: Your Personal Resilience Baseline, Strengths and Challenges
Self-awareness of your resilience level across seven categories & baseline
Knowledge: The link between resilience and sustainable high performance
Knowledge: Inconvenient truths and empowering beliefs about resilience
Q&A and signposts: to 30 small habits to build your resilience
Action planning: one behaviour you will implement, starting today.
Module 2: Turning Knowing into Doing
Self-awareness: The road to burnout is paved with good intentions
Skills: Aligning your actions with your core values
The courage, conviction and commitment to 'doing differently'
Q&A and signposts: to a range of specific tools to build your confidence
Action planning: one behaviour you will implement, starting today.
Why now?
The pandemic has amplified existing resource pressure and accelerated change and uncertainty
The consequences of taking our health for granted, mentally, physically or emotionally are severe
Workplace stress has reached epidemic proportions in many regions across the globe
The cost of presenteeism is double the cost of absenteeism
Over two years of heightened pressure means many people are operating with lower personal capacity
Benefits?
Increase your capacity to take on new challenges, reduce existing stress and prepare yourself for unexpected adversity.
How?
Suitable for all leaders, everywhere
Resilience can be learned the easy way (taught) or the hard way (personal experience of adversity)
There are 7 categories of resilience, most people score very low on at least 2-3 categories
Having at least some resilience habits in every category means you have a tool for every situation
The resilience habits in the FREEDOM model are simple, powerful, fast, free and readily implemented
Tried-and-tested workshops, 3 to 4 hours tailored for Leaders and Executives
Stand-alone workshops or integrate into wider development programmes


Mpi Learning - Professional Learning And Development Provider

Resilience is the ability to take the challenges and changes of life in your stride and say yes to the opportunities that excite you.

Developing Personal Resilience as a Leader

General Admission

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Who Should Attend</h2>This course is aimed at candidates that require the knowledge and practical skills operate Forward Tipping Dumpers to transport and discharge loads. This course can be completed by both novice and experienced candidates. We also offer refresher tests.Novice course- 3 DaysExperienced worker tests- 1 day theory and practical assessment<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Course information</h2>Category N204 Forward Tipping DumperIt is envisaged that by the end of this course of training the learner will be able to answer questions on and perform the following: ➢ Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operator ➢ Have a working knowledge of the manufacturer&rsquo;s handbook for the particular machine to be used ➢ Be able to locate and identify the major components of the machine and explain their functions ➢ Be able to locate and identify key controls and explain their functions ➢ Conduct all pre-operational checks in accordance with manufacturer&rsquo;s and legislative requirements ➢ Identify and maintain PPE appropriate for forward tipping dumper use ➢ Prepare the forward tipping dumper for use and operate safely and efficiently ➢ Conduct all necessary safety checks at the work area ➢ Attach and set trailers, ready for operation ➢ Environmental considerations ➢ Storage and transport of implements and attachments ➢ Carry out all end of shift and shut down procedures<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Assessment</h2>Assessment will be to NPORS standards consisting of a theory test and practical test.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Certification</h2>NPORS Traditional card &ndash; With the traditional card there is no requirements to complete an NVQ, a five year card is issued and after five years reassessment is required.NPORS CSCS &ndash; To ensure that the operator is able to receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant.

Who Should Attend
This course is aimed at candidates that require the knowledge and practical skills operate Forward Tipping Dumpers to transport and discharge loads. This course can be completed by both novice and experienced candidates. We also offer refresher tests.
Novice course- 3 Days
Experienced worker tests- 1 day theory and practical assessment
Course information
Category N204 Forward Tipping Dumper
It is envisaged that by the end of this course of training the learner will be able to answer questions on and perform the following:
➢ Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operator
➢ Have a working knowledge of the manufacturer’s handbook for the particular machine to be used
➢ Be able to locate and identify the major components of the machine and explain their functions
➢ Be able to locate and identify key controls and explain their functions
➢ Conduct all pre-operational checks in accordance with manufacturer’s and legislative
requirements
➢ Identify and maintain PPE appropriate for forward tipping dumper use
➢ Prepare the forward tipping dumper for use and operate safely and efficiently
➢ Conduct all necessary safety checks at the work area
➢ Attach and set trailers, ready for operation
➢ Environmental considerations
➢ Storage and transport of implements and attachments
➢ Carry out all end of shift and shut down procedures
Assessment
Assessment will be to NPORS standards consisting of a theory test and practical test.
Certification
NPORS Traditional card – With the traditional card there is no requirements to complete an NVQ, a five year card is issued and after five years reassessment is required.
NPORS CSCS – To ensure that the operator is able to receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant.

NPORS Forward Tipping Dumper (N204)

MJ Electrical Training has the largest centre network in the UK, with City &amp; Guilds exams available every week.Final exams for the 18th Edition Wiring Regulations, Part P Building Regulations, ECS Health &amp; Safety Courses&nbsp;and CSCS Green Labourers Health &amp; Safety in a Construction Environment are available weekly.<a href="https://mjelectricaltraining.co.uk/exam-venue/safety-passport/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">Learn More @ MJ Electrical Training &gt;&gt;</a>Take the First Step Towards a Successful Career in the Electrical Industry with the SPA Health &amp; Safety Core DayAre you ready to kickstart or advance your career in the electrical industry? Obtaining the ECS Labourer Card is a crucial milestone that demonstrates your competence in assisting electricians in their installations. This card not only opens doors for new opportunities but also ensures that you are recognized as a qualified professional in the field. One of the most efficient ways to qualify for this essential certification is by completing the SPA Health &amp; Safety Core Day, offered by MJ Electrical Training.Why is the ECS Labourer Card Important?The ECS Labourer Card is a must-have for anyone looking to start or further their career in the electrical industry. It signifies that you are competent to assist electricians in their electrical installations under supervision, ensuring safety and efficiency on the job. While advanced qualifications like the JIB Gold Card require extensive training and experience, the ECS Labourer Card provides a valuable entry point for newcomers, trainees, and those aiming to become fully qualified electricians.Pathways to the ECS Labourer CardMJ Electrical Training outlines two primary routes to gaining the ECS Labourer Card, depending on your previous qualifications and experience:1.&nbsp;Route One: If you already hold approved JIB theory qualifications, you may be exempt from additional health and safety courses.2.&nbsp;Route Two: If you do not hold these qualifications, you will need to complete an ECS-approved Health &amp; Safety Course. The SPA Health &amp; Safety Core Day is one of the most accessible and comprehensive options available.SPA Health &amp; Safety Core Day: Your Gateway to ECS Health &amp; Safety ExemptionThe SPA Health &amp; Safety Core Day, offered by MJ Electrical Training for just &pound;174.00 (including VAT), is a one-day online face-to-face training course delivered via Teams or Zoom. Available every week, this course is designed to provide you with the essential health and safety knowledge required for the electrical industry. Completing this course will exempt you from the ECS Health &amp; Safety Assessment, streamlining your path to obtaining the ECS Labourer Card.Who Should Take This Course?The SPA Health &amp; Safety Core Day is ideal for anyone looking to gain an ECS Labourers Card or complete an ECS Health &amp; Safety Exemption:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Practising electricians looking to formalise their safety training.</li><li fr-original-style="" style="box-sizing: border-box;">Trainees and apprentices in the electrical industry.</li><li fr-original-style="" style="box-sizing: border-box;">Associated trade professionals such as electrical engineers, contracts managers, designers, consultants, surveyors, builders, and plumbers.</li></ul>Benefits of the SPA Health &amp; Safety Core Day<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Comprehensive Training: The course covers all necessary aspects of health and safety in the electrical industry, ensuring you are well-prepared for your role.</li><li fr-original-style="" style="box-sizing: border-box;">Flexible Learning: Delivered online, you can complete the training from the comfort of your home or office, making it convenient and accessible.</li><li fr-original-style="" style="box-sizing: border-box;">Certification: Upon completion, you will receive a certificate that can be used to evidence you meet the H&amp;S requirements for the ECS Labourer Card.</li></ul>Further Opportunities with the ECS Labourer CardObtaining the ECS Labourer Card allows you to progress into employment and onto further qualifications, such as:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification (2392-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Certificate in Building Regulations for Electrical Installation Contractors in Dwellings (2393-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Initial Verification (2391-50)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in the Periodic Inspection (2391-51)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Inspection and Testing (2391-52)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 4 Higher Professional Diploma in Building Services Engineering (4467-04)</li></ul>To qualify for the ECS Labourer Card, not only must you have an ECS-approved H&amp;S course, but you must also demonstrate active engagement in the electrotechnical sector. This proof can be provided through:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">An application by your employer via the ECS Employer Portal.</li><li fr-original-style="" style="box-sizing: border-box;">A written reference from your current employer on company-headed paper, stating your role as an electrical labourer, start date, and signed by an authorised person.</li><li fr-original-style="" style="box-sizing: border-box;">Confirmation of your contract duration from an agency if you are working through one.</li><li fr-original-style="" style="box-sizing: border-box;">Documented proof of enrolment in a related electrical course from your educational institution.</li></ul>Additionally, you can submit an offer letter, employment contract, or recent payslip from a reputable business within the industry. These documents validate your eligibility and expertise, completing the ECS Labourer Card application process.Verify and Stay UpdatedWhile every effort is made to provide accurate and up-to-date information, it is essential to verify the current application criteria by visiting the <a href="https://www.ecscard.org.uk/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">ECS Website</a>. Keeping informed ensures that you meet all requirements and avoid any potential issues during the application process.ConclusionTaking the SPA Health &amp; Safety Core Day is a strategic move for anyone looking to advance their career in the electrical industry. Not only does it provide essential health and safety training, but it also qualifies you for the ECS Labourer Card, a vital certification for gaining employment and furthering your career.Enrol in the SPA Health &amp; Safety Core Day with MJ Electrical Training today. Equip yourself with the knowledge and certification needed to excel in the dynamic and rewarding field of electrical installations. Your journey to becoming a fully qualified electrician starts here!&nbsp;

MJ Electrical Training has the largest centre network in the UK, with City & Guilds exams available every week.
Final exams for the 18th Edition Wiring Regulations, Part P Building Regulations, ECS Health & Safety Courses and CSCS Green Labourers Health & Safety in a Construction Environment are available weekly.
Learn More @ MJ Electrical Training >>
Take the First Step Towards a Successful Career in the Electrical Industry with the SPA Health & Safety Core Day
Are you ready to kickstart or advance your career in the electrical industry? Obtaining the ECS Labourer Card is a crucial milestone that demonstrates your competence in assisting electricians in their installations. This card not only opens doors for new opportunities but also ensures that you are recognized as a qualified professional in the field. One of the most efficient ways to qualify for this essential certification is by completing the SPA Health & Safety Core Day, offered by MJ Electrical Training.
Why is the ECS Labourer Card Important?
The ECS Labourer Card is a must-have for anyone looking to start or further their career in the electrical industry. It signifies that you are competent to assist electricians in their electrical installations under supervision, ensuring safety and efficiency on the job. While advanced qualifications like the JIB Gold Card require extensive training and experience, the ECS Labourer Card provides a valuable entry point for newcomers, trainees, and those aiming to become fully qualified electricians.
Pathways to the ECS Labourer Card
MJ Electrical Training outlines two primary routes to gaining the ECS Labourer Card, depending on your previous qualifications and experience:
1. Route One: If you already hold approved JIB theory qualifications, you may be exempt from additional health and safety courses.
2. Route Two: If you do not hold these qualifications, you will need to complete an ECS-approved Health & Safety Course. The SPA Health & Safety Core Day is one of the most accessible and comprehensive options available.
SPA Health & Safety Core Day: Your Gateway to ECS Health & Safety Exemption
The SPA Health & Safety Core Day, offered by MJ Electrical Training for just £174.00 (including VAT), is a one-day online face-to-face training course delivered via Teams or Zoom. Available every week, this course is designed to provide you with the essential health and safety knowledge required for the electrical industry. Completing this course will exempt you from the ECS Health & Safety Assessment, streamlining your path to obtaining the ECS Labourer Card.
Who Should Take This Course?
The SPA Health & Safety Core Day is ideal for anyone looking to gain an ECS Labourers Card or complete an ECS Health & Safety Exemption:
Practising electricians looking to formalise their safety training.
Trainees and apprentices in the electrical industry.
Associated trade professionals such as electrical engineers, contracts managers, designers, consultants, surveyors, builders, and plumbers.
Benefits of the SPA Health & Safety Core Day
Comprehensive Training: The course covers all necessary aspects of health and safety in the electrical industry, ensuring you are well-prepared for your role.
Flexible Learning: Delivered online, you can complete the training from the comfort of your home or office, making it convenient and accessible.
Certification: Upon completion, you will receive a certificate that can be used to evidence you meet the H&S requirements for the ECS Labourer Card.
Further Opportunities with the ECS Labourer Card
Obtaining the ECS Labourer Card allows you to progress into employment and onto further qualifications, such as:
City & Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification (2392-10)
City & Guilds Level 3 Certificate in Building Regulations for Electrical Installation Contractors in Dwellings (2393-10)
City & Guilds Level 3 Award in Initial Verification (2391-50)
City & Guilds Level 3 Award in the Periodic Inspection (2391-51)
City & Guilds Level 3 Award in Inspection and Testing (2391-52)
City & Guilds Level 4 Higher Professional Diploma in Building Services Engineering (4467-04)
To qualify for the ECS Labourer Card, not only must you have an ECS-approved H&S course, but you must also demonstrate active engagement in the electrotechnical sector. This proof can be provided through:
An application by your employer via the ECS Employer Portal.
A written reference from your current employer on company-headed paper, stating your role as an electrical labourer, start date, and signed by an authorised person.
Confirmation of your contract duration from an agency if you are working through one.
Documented proof of enrolment in a related electrical course from your educational institution.
Additionally, you can submit an offer letter, employment contract, or recent payslip from a reputable business within the industry. These documents validate your eligibility and expertise, completing the ECS Labourer Card application process.
Verify and Stay Updated
While every effort is made to provide accurate and up-to-date information, it is essential to verify the current application criteria by visiting the ECS Website. Keeping informed ensures that you meet all requirements and avoid any potential issues during the application process.
Conclusion
Taking the SPA Health & Safety Core Day is a strategic move for anyone looking to advance their career in the electrical industry. Not only does it provide essential health and safety training, but it also qualifies you for the ECS Labourer Card, a vital certification for gaining employment and furthering your career.
Enrol in the SPA Health & Safety Core Day with MJ Electrical Training today. Equip yourself with the knowledge and certification needed to excel in the dynamic and rewarding field of electrical installations. Your journey to becoming a fully qualified electrician starts here!
 

MJ Electrical Training 

Construction Industry Scheme (CIS)

City & Guilds

Electrical Testing

Wiring Regulations

Electrical Installation

Electrical Inspection & Testing

ECS Health & Safety Course with MJ Electrical Training. Available every week, use this course to complete the application process when applying for an ECS Labourers Card. 

ECS Card Health & Safety Course Bromley

MJ Electrical Training has the largest centre network in the UK, with City &amp; Guilds exams available every week.Final exams for the 18th Edition Wiring Regulations, Part P Building Regulations, ECS Health &amp; Safety Courses&nbsp;and CSCS Green Labourers Health &amp; Safety in a Construction Environment are available weekly in Dover.<a href="https://mjelectricaltraining.co.uk/exam-venue/safety-passport/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">Learn More @ MJ Electrical Training &gt;&gt;</a>Take the First Step Towards a Successful Career in the Electrical Industry with the SPA Health &amp; Safety Core DayAre you ready to kickstart or advance your career in the electrical industry? Obtaining the ECS Labourer Card is a crucial milestone that demonstrates your competence in assisting electricians in their installations. This card not only opens doors for new opportunities but also ensures that you are recognized as a qualified professional in the field. One of the most efficient ways to qualify for this essential certification is by completing the SPA Health &amp; Safety Core Day, offered by MJ Electrical Training.Why is the ECS Labourer Card Important?The ECS Labourer Card is a must-have for anyone looking to start or further their career in the electrical industry. It signifies that you are competent to assist electricians in their electrical installations under supervision, ensuring safety and efficiency on the job. While advanced qualifications like the JIB Gold Card require extensive training and experience, the ECS Labourer Card provides a valuable entry point for newcomers, trainees, and those aiming to become fully qualified electricians.Pathways to the ECS Labourer CardMJ Electrical Training outlines two primary routes to gaining the ECS Labourer Card, depending on your previous qualifications and experience:1.&nbsp;Route One: If you already hold approved JIB theory qualifications, you may be exempt from additional health and safety courses.2.&nbsp;Route Two: If you do not hold these qualifications, you will need to complete an ECS-approved Health &amp; Safety Course. The SPA Health &amp; Safety Core Day is one of the most accessible and comprehensive options available.SPA Health &amp; Safety Core Day: Your Gateway to ECS Health &amp; Safety ExemptionThe SPA Health &amp; Safety Core Day, offered by MJ Electrical Training for just &pound;174.00 (including VAT), is a one-day online face-to-face training course delivered via Teams or Zoom. Available every week, this course is designed to provide you with the essential health and safety knowledge required for the electrical industry. Completing this course will exempt you from the ECS Health &amp; Safety Assessment, streamlining your path to obtaining the ECS Labourer Card.Who Should Take This Course?The SPA Health &amp; Safety Core Day is ideal for anyone looking to gain an ECS Labourers Card or complete an ECS Health &amp; Safety Exemption:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Practising electricians looking to formalise their safety training.</li><li fr-original-style="" style="box-sizing: border-box;">Trainees and apprentices in the electrical industry.</li><li fr-original-style="" style="box-sizing: border-box;">Associated trade professionals such as electrical engineers, contracts managers, designers, consultants, surveyors, builders, and plumbers.</li></ul>Benefits of the SPA Health &amp; Safety Core Day<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Comprehensive Training: The course covers all necessary aspects of health and safety in the electrical industry, ensuring you are well-prepared for your role.</li><li fr-original-style="" style="box-sizing: border-box;">Flexible Learning: Delivered online, you can complete the training from the comfort of your home or office, making it convenient and accessible.</li><li fr-original-style="" style="box-sizing: border-box;">Certification: Upon completion, you will receive a certificate that can be used to evidence you meet the H&amp;S requirements for the ECS Labourer Card.</li></ul>Further Opportunities with the ECS Labourer CardObtaining the ECS Labourer Card allows you to progress into employment and onto further qualifications, such as:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification (2392-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Certificate in Building Regulations for Electrical Installation Contractors in Dwellings (2393-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Initial Verification (2391-50)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in the Periodic Inspection (2391-51)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Inspection and Testing (2391-52)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 4 Higher Professional Diploma in Building Services Engineering (4467-04)</li></ul>To qualify for the ECS Labourer Card, not only must you have an ECS-approved H&amp;S course, but you must also demonstrate active engagement in the electrotechnical sector. This proof can be provided through:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">An application by your employer via the ECS Employer Portal.</li><li fr-original-style="" style="box-sizing: border-box;">A written reference from your current employer on company-headed paper, stating your role as an electrical labourer, start date, and signed by an authorised person.</li><li fr-original-style="" style="box-sizing: border-box;">Confirmation of your contract duration from an agency if you are working through one.</li><li fr-original-style="" style="box-sizing: border-box;">Documented proof of enrolment in a related electrical course from your educational institution.</li></ul>Additionally, you can submit an offer letter, employment contract, or recent payslip from a reputable business within the industry. These documents validate your eligibility and expertise, completing the ECS Labourer Card application process.Verify and Stay UpdatedWhile every effort is made to provide accurate and up-to-date information, it is essential to verify the current application criteria by visiting the <a href="https://www.ecscard.org.uk/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">ECS Website</a>. Keeping informed ensures that you meet all requirements and avoid any potential issues during the application process.ConclusionTaking the SPA Health &amp; Safety Core Day is a strategic move for anyone looking to advance their career in the electrical industry. Not only does it provide essential health and safety training, but it also qualifies you for the ECS Labourer Card, a vital certification for gaining employment and furthering your career.Enrol in the SPA Health &amp; Safety Core Day with MJ Electrical Training today. Equip yourself with the knowledge and certification needed to excel in the dynamic and rewarding field of electrical installations. Your journey to becoming a fully qualified electrician starts here!&nbsp;

MJ Electrical Training has the largest centre network in the UK, with City & Guilds exams available every week.
Final exams for the 18th Edition Wiring Regulations, Part P Building Regulations, ECS Health & Safety Courses and CSCS Green Labourers Health & Safety in a Construction Environment are available weekly in Dover.
Learn More @ MJ Electrical Training >>
Take the First Step Towards a Successful Career in the Electrical Industry with the SPA Health & Safety Core Day
Are you ready to kickstart or advance your career in the electrical industry? Obtaining the ECS Labourer Card is a crucial milestone that demonstrates your competence in assisting electricians in their installations. This card not only opens doors for new opportunities but also ensures that you are recognized as a qualified professional in the field. One of the most efficient ways to qualify for this essential certification is by completing the SPA Health & Safety Core Day, offered by MJ Electrical Training.
Why is the ECS Labourer Card Important?
The ECS Labourer Card is a must-have for anyone looking to start or further their career in the electrical industry. It signifies that you are competent to assist electricians in their electrical installations under supervision, ensuring safety and efficiency on the job. While advanced qualifications like the JIB Gold Card require extensive training and experience, the ECS Labourer Card provides a valuable entry point for newcomers, trainees, and those aiming to become fully qualified electricians.
Pathways to the ECS Labourer Card
MJ Electrical Training outlines two primary routes to gaining the ECS Labourer Card, depending on your previous qualifications and experience:
1. Route One: If you already hold approved JIB theory qualifications, you may be exempt from additional health and safety courses.
2. Route Two: If you do not hold these qualifications, you will need to complete an ECS-approved Health & Safety Course. The SPA Health & Safety Core Day is one of the most accessible and comprehensive options available.
SPA Health & Safety Core Day: Your Gateway to ECS Health & Safety Exemption
The SPA Health & Safety Core Day, offered by MJ Electrical Training for just £174.00 (including VAT), is a one-day online face-to-face training course delivered via Teams or Zoom. Available every week, this course is designed to provide you with the essential health and safety knowledge required for the electrical industry. Completing this course will exempt you from the ECS Health & Safety Assessment, streamlining your path to obtaining the ECS Labourer Card.
Who Should Take This Course?
The SPA Health & Safety Core Day is ideal for anyone looking to gain an ECS Labourers Card or complete an ECS Health & Safety Exemption:
Practising electricians looking to formalise their safety training.
Trainees and apprentices in the electrical industry.
Associated trade professionals such as electrical engineers, contracts managers, designers, consultants, surveyors, builders, and plumbers.
Benefits of the SPA Health & Safety Core Day
Comprehensive Training: The course covers all necessary aspects of health and safety in the electrical industry, ensuring you are well-prepared for your role.
Flexible Learning: Delivered online, you can complete the training from the comfort of your home or office, making it convenient and accessible.
Certification: Upon completion, you will receive a certificate that can be used to evidence you meet the H&S requirements for the ECS Labourer Card.
Further Opportunities with the ECS Labourer Card
Obtaining the ECS Labourer Card allows you to progress into employment and onto further qualifications, such as:
City & Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification (2392-10)
City & Guilds Level 3 Certificate in Building Regulations for Electrical Installation Contractors in Dwellings (2393-10)
City & Guilds Level 3 Award in Initial Verification (2391-50)
City & Guilds Level 3 Award in the Periodic Inspection (2391-51)
City & Guilds Level 3 Award in Inspection and Testing (2391-52)
City & Guilds Level 4 Higher Professional Diploma in Building Services Engineering (4467-04)
To qualify for the ECS Labourer Card, not only must you have an ECS-approved H&S course, but you must also demonstrate active engagement in the electrotechnical sector. This proof can be provided through:
An application by your employer via the ECS Employer Portal.
A written reference from your current employer on company-headed paper, stating your role as an electrical labourer, start date, and signed by an authorised person.
Confirmation of your contract duration from an agency if you are working through one.
Documented proof of enrolment in a related electrical course from your educational institution.
Additionally, you can submit an offer letter, employment contract, or recent payslip from a reputable business within the industry. These documents validate your eligibility and expertise, completing the ECS Labourer Card application process.
Verify and Stay Updated
While every effort is made to provide accurate and up-to-date information, it is essential to verify the current application criteria by visiting the ECS Website. Keeping informed ensures that you meet all requirements and avoid any potential issues during the application process.
Conclusion
Taking the SPA Health & Safety Core Day is a strategic move for anyone looking to advance their career in the electrical industry. Not only does it provide essential health and safety training, but it also qualifies you for the ECS Labourer Card, a vital certification for gaining employment and furthering your career.
Enrol in the SPA Health & Safety Core Day with MJ Electrical Training today. Equip yourself with the knowledge and certification needed to excel in the dynamic and rewarding field of electrical installations. Your journey to becoming a fully qualified electrician starts here!
 

ECS Card Health & Safety Course Liverpool

ECS Card Health & Safety Course Dover

Bromley

MJ Electrical Training has the largest centre network in the UK, with City &amp; Guilds exams available every week.Final exams for the 18th Edition Wiring Regulations, Part P Building Regulations, ECS Health &amp; Safety Courses&nbsp;and CSCS Green Labourers Health &amp; Safety in a Construction Environment are available weekly in Kent.<a href="https://mjelectricaltraining.co.uk/exam-venue/safety-passport/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">Learn More @ MJ Electrical Training &gt;&gt;</a>Take the First Step Towards a Successful Career in the Electrical Industry with the SPA Health &amp; Safety Core DayAre you ready to kickstart or advance your career in the electrical industry? Obtaining the ECS Labourer Card is a crucial milestone that demonstrates your competence in assisting electricians in their installations. This card not only opens doors for new opportunities but also ensures that you are recognized as a qualified professional in the field. One of the most efficient ways to qualify for this essential certification is by completing the SPA Health &amp; Safety Core Day, offered by MJ Electrical Training.Why is the ECS Labourer Card Important?The ECS Labourer Card is a must-have for anyone looking to start or further their career in the electrical industry. It signifies that you are competent to assist electricians in their electrical installations under supervision, ensuring safety and efficiency on the job. While advanced qualifications like the JIB Gold Card require extensive training and experience, the ECS Labourer Card provides a valuable entry point for newcomers, trainees, and those aiming to become fully qualified electricians.Pathways to the ECS Labourer CardMJ Electrical Training outlines two primary routes to gaining the ECS Labourer Card, depending on your previous qualifications and experience:1.&nbsp;Route One: If you already hold approved JIB theory qualifications, you may be exempt from additional health and safety courses.2.&nbsp;Route Two: If you do not hold these qualifications, you will need to complete an ECS-approved Health &amp; Safety Course. The SPA Health &amp; Safety Core Day is one of the most accessible and comprehensive options available.SPA Health &amp; Safety Core Day: Your Gateway to ECS Health &amp; Safety ExemptionThe SPA Health &amp; Safety Core Day, offered by MJ Electrical Training for just &pound;174.00 (including VAT), is a one-day online face-to-face training course delivered via Teams or Zoom. Available every week, this course is designed to provide you with the essential health and safety knowledge required for the electrical industry. Completing this course will exempt you from the ECS Health &amp; Safety Assessment, streamlining your path to obtaining the ECS Labourer Card.Who Should Take This Course?The SPA Health &amp; Safety Core Day is ideal for anyone looking to gain an ECS Labourers Card or complete an ECS Health &amp; Safety Exemption:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Practising electricians looking to formalise their safety training.</li><li fr-original-style="" style="box-sizing: border-box;">Trainees and apprentices in the electrical industry.</li><li fr-original-style="" style="box-sizing: border-box;">Associated trade professionals such as electrical engineers, contracts managers, designers, consultants, surveyors, builders, and plumbers.</li></ul>Benefits of the SPA Health &amp; Safety Core Day<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Comprehensive Training: The course covers all necessary aspects of health and safety in the electrical industry, ensuring you are well-prepared for your role.</li><li fr-original-style="" style="box-sizing: border-box;">Flexible Learning: Delivered online, you can complete the training from the comfort of your home or office, making it convenient and accessible.</li><li fr-original-style="" style="box-sizing: border-box;">Certification: Upon completion, you will receive a certificate that can be used to evidence you meet the H&amp;S requirements for the ECS Labourer Card.</li></ul>Further Opportunities with the ECS Labourer CardObtaining the ECS Labourer Card allows you to progress into employment and onto further qualifications, such as:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification (2392-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Certificate in Building Regulations for Electrical Installation Contractors in Dwellings (2393-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Initial Verification (2391-50)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in the Periodic Inspection (2391-51)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Inspection and Testing (2391-52)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 4 Higher Professional Diploma in Building Services Engineering (4467-04)</li></ul>To qualify for the ECS Labourer Card, not only must you have an ECS-approved H&amp;S course, but you must also demonstrate active engagement in the electrotechnical sector. This proof can be provided through:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">An application by your employer via the ECS Employer Portal.</li><li fr-original-style="" style="box-sizing: border-box;">A written reference from your current employer on company-headed paper, stating your role as an electrical labourer, start date, and signed by an authorised person.</li><li fr-original-style="" style="box-sizing: border-box;">Confirmation of your contract duration from an agency if you are working through one.</li><li fr-original-style="" style="box-sizing: border-box;">Documented proof of enrolment in a related electrical course from your educational institution.</li></ul>Additionally, you can submit an offer letter, employment contract, or recent payslip from a reputable business within the industry. These documents validate your eligibility and expertise, completing the ECS Labourer Card application process.Verify and Stay UpdatedWhile every effort is made to provide accurate and up-to-date information, it is essential to verify the current application criteria by visiting the <a href="https://www.ecscard.org.uk/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">ECS Website</a>. Keeping informed ensures that you meet all requirements and avoid any potential issues during the application process.ConclusionTaking the SPA Health &amp; Safety Core Day is a strategic move for anyone looking to advance their career in the electrical industry. Not only does it provide essential health and safety training, but it also qualifies you for the ECS Labourer Card, a vital certification for gaining employment and furthering your career.Enrol in the SPA Health &amp; Safety Core Day with MJ Electrical Training today. Equip yourself with the knowledge and certification needed to excel in the dynamic and rewarding field of electrical installations. Your journey to becoming a fully qualified electrician starts here!&nbsp;

MJ Electrical Training has the largest centre network in the UK, with City & Guilds exams available every week.
Final exams for the 18th Edition Wiring Regulations, Part P Building Regulations, ECS Health & Safety Courses and CSCS Green Labourers Health & Safety in a Construction Environment are available weekly in Kent.
Learn More @ MJ Electrical Training >>
Take the First Step Towards a Successful Career in the Electrical Industry with the SPA Health & Safety Core Day
Are you ready to kickstart or advance your career in the electrical industry? Obtaining the ECS Labourer Card is a crucial milestone that demonstrates your competence in assisting electricians in their installations. This card not only opens doors for new opportunities but also ensures that you are recognized as a qualified professional in the field. One of the most efficient ways to qualify for this essential certification is by completing the SPA Health & Safety Core Day, offered by MJ Electrical Training.
Why is the ECS Labourer Card Important?
The ECS Labourer Card is a must-have for anyone looking to start or further their career in the electrical industry. It signifies that you are competent to assist electricians in their electrical installations under supervision, ensuring safety and efficiency on the job. While advanced qualifications like the JIB Gold Card require extensive training and experience, the ECS Labourer Card provides a valuable entry point for newcomers, trainees, and those aiming to become fully qualified electricians.
Pathways to the ECS Labourer Card
MJ Electrical Training outlines two primary routes to gaining the ECS Labourer Card, depending on your previous qualifications and experience:
1. Route One: If you already hold approved JIB theory qualifications, you may be exempt from additional health and safety courses.
2. Route Two: If you do not hold these qualifications, you will need to complete an ECS-approved Health & Safety Course. The SPA Health & Safety Core Day is one of the most accessible and comprehensive options available.
SPA Health & Safety Core Day: Your Gateway to ECS Health & Safety Exemption
The SPA Health & Safety Core Day, offered by MJ Electrical Training for just £174.00 (including VAT), is a one-day online face-to-face training course delivered via Teams or Zoom. Available every week, this course is designed to provide you with the essential health and safety knowledge required for the electrical industry. Completing this course will exempt you from the ECS Health & Safety Assessment, streamlining your path to obtaining the ECS Labourer Card.
Who Should Take This Course?
The SPA Health & Safety Core Day is ideal for anyone looking to gain an ECS Labourers Card or complete an ECS Health & Safety Exemption:
Practising electricians looking to formalise their safety training.
Trainees and apprentices in the electrical industry.
Associated trade professionals such as electrical engineers, contracts managers, designers, consultants, surveyors, builders, and plumbers.
Benefits of the SPA Health & Safety Core Day
Comprehensive Training: The course covers all necessary aspects of health and safety in the electrical industry, ensuring you are well-prepared for your role.
Flexible Learning: Delivered online, you can complete the training from the comfort of your home or office, making it convenient and accessible.
Certification: Upon completion, you will receive a certificate that can be used to evidence you meet the H&S requirements for the ECS Labourer Card.
Further Opportunities with the ECS Labourer Card
Obtaining the ECS Labourer Card allows you to progress into employment and onto further qualifications, such as:
City & Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification (2392-10)
City & Guilds Level 3 Certificate in Building Regulations for Electrical Installation Contractors in Dwellings (2393-10)
City & Guilds Level 3 Award in Initial Verification (2391-50)
City & Guilds Level 3 Award in the Periodic Inspection (2391-51)
City & Guilds Level 3 Award in Inspection and Testing (2391-52)
City & Guilds Level 4 Higher Professional Diploma in Building Services Engineering (4467-04)
To qualify for the ECS Labourer Card, not only must you have an ECS-approved H&S course, but you must also demonstrate active engagement in the electrotechnical sector. This proof can be provided through:
An application by your employer via the ECS Employer Portal.
A written reference from your current employer on company-headed paper, stating your role as an electrical labourer, start date, and signed by an authorised person.
Confirmation of your contract duration from an agency if you are working through one.
Documented proof of enrolment in a related electrical course from your educational institution.
Additionally, you can submit an offer letter, employment contract, or recent payslip from a reputable business within the industry. These documents validate your eligibility and expertise, completing the ECS Labourer Card application process.
Verify and Stay Updated
While every effort is made to provide accurate and up-to-date information, it is essential to verify the current application criteria by visiting the ECS Website. Keeping informed ensures that you meet all requirements and avoid any potential issues during the application process.
Conclusion
Taking the SPA Health & Safety Core Day is a strategic move for anyone looking to advance their career in the electrical industry. Not only does it provide essential health and safety training, but it also qualifies you for the ECS Labourer Card, a vital certification for gaining employment and furthering your career.
Enrol in the SPA Health & Safety Core Day with MJ Electrical Training today. Equip yourself with the knowledge and certification needed to excel in the dynamic and rewarding field of electrical installations. Your journey to becoming a fully qualified electrician starts here!
 

ECS Card Health & Safety Course Kent

ECS Card Health & Safety Course Newcastle

<div style="color: rgb(36, 39, 41); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(36, 39, 41);">The theory assessment provides delegates with the essential knowledge to select, monitor, manage and plan the correct use of Harnesses and lanyards for use in a MEWP.</div><div style="color: rgb(36, 39, 41); box-sizing: border-box;" fr-original-style=" color: rgb(36, 39, 41);"> </div><div style="color: rgb(36, 39, 41); box-sizing: border-box;" fr-original-style=" color: rgb(36, 39, 41);">Delegates successfully completing the e-learning will: <ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Have an awareness of how to correctly identify and select the appropriate form of personal protection against falls from MEWPs.</li><li fr-original-style="" style="box-sizing: border-box;">Have a theoretical awareness only of how to check, use, maintain and store a harness and lanyard with manufacturer&rsquo;s instructions.</li><li fr-original-style="" style="box-sizing: border-box;">Have a theoretical awareness of how harnesses and lanyards should be fitted and adjusted.</li></ul></div>

The theory assessment provides delegates with the essential knowledge to select, monitor, manage and plan the correct use of Harnesses and lanyards for use in a MEWP.
Delegates successfully completing the e-learning will:
Have an awareness of how to correctly identify and select the appropriate form of personal
protection against falls from MEWPs.
Have a theoretical awareness only of how to check, use, maintain and store a harness and
lanyard with manufacturer’s instructions.
Have a theoretical awareness of how harnesses and lanyards should be fitted and adjusted.

Kingfisher Access

The theory assessment provides delegates with the essential knowledge to select, monitor, manage and plan the correct use of Harnesses and lanyards for use in a MEWP.

Delegates successfully completing the e-learning will:
Have an awareness of how to correctly identify and select the appropriate form of personal
protection against falls from MEWPs.
Have a theoretical awareness only of how to check, use, maintain and store a harness and
lanyard with manufacturer’s instructions.
Have a theoretical awareness of how harnesses and lanyards should be fitted and adjusted.

IPAF - Harness Awareness 

When it comes to designing our dream future, there are a few &nbsp;aspects to be considered...Firstly, amongst the chaos, how often do we actually create space to think about what we genuinely want for ourselves?And then when we do, are they our own desires, or someone else&#39;s?Vision boards help you to gain clarity&nbsp;on what you truly want from lifeI will teach you to&nbsp;connect&nbsp;back in with your&nbsp;core values,&nbsp;an overview behind&nbsp;manifestation&nbsp;and how our early life experiences may have impacted us now (positively and negatively).<ul style="color: rgb(37, 46, 57); box-sizing: border-box;" fr-original-style=" color: rgb(37, 46, 57);"><li fr-original-style="" style="box-sizing: border-box;">Experience a short meditation to clear and open the mind</li><li fr-original-style="" style="box-sizing: border-box;">Identify your big dreams and goals, your values and how this aligns with your identity and purpose.</li><li fr-original-style="" style="box-sizing: border-box;">Create your unique vision board from scratch.</li></ul>The Workshop will be a hybrid of meditation, fun and networking helping you to connect back in with who you truly are, your centre of creativity, and visualise your dream life.This is for you if you say yes to one or more of the following:<ul style="color: rgb(37, 46, 57); box-sizing: border-box;" fr-original-style=" color: rgb(37, 46, 57);"><li fr-original-style="" style="box-sizing: border-box;">you are ready to explore what you want from life</li><li fr-original-style="" style="box-sizing: border-box;">you feel stuck and uninspired</li><li fr-original-style="" style="box-sizing: border-box;">you have a vision, but you want to have a daily reminder of your dreams and goals</li><li fr-original-style="" style="box-sizing: border-box;">you want to manifest your vision or dream life quicker</li><li fr-original-style="" style="box-sizing: border-box;">you would like to passionately connect with your goals and dreams</li><li fr-original-style="" style="box-sizing: border-box;">you would like to connect with your sacral chakra and instil some creativity into your energy</li></ul>Are you ready to create the life that lights you up? Resources required:&nbsp;Everyone: Notepad + pen, quiet space for reflection.&nbsp;If you know you definitely want to create your Vision Board on your Computer, then please come ready with access to Microsoft word or Canva. &nbsp;Otherwise (and this is my favourite way to start a vision board experience), you will also need;Access to images that you can cut out. &nbsp;Here are some ideas on building your portfolio of images:<ul style="color: rgb(37, 46, 57); box-sizing: border-box;" fr-original-style=" color: rgb(37, 46, 57);"><li fr-original-style="" style="box-sizing: border-box;">buy your favourite magazine/ ask around your friends/ family if you can have it rather than being thrown away</li><li fr-original-style="" style="box-sizing: border-box;">local supermarkets that offer their free magazine</li><li fr-original-style="" style="box-sizing: border-box;">travel agents&nbsp;</li><li fr-original-style="" style="box-sizing: border-box;">keep hold of local magazines/ newspapers/ flyers dropped through the door</li><li fr-original-style="" style="box-sizing: border-box;">photos that you don&#39;t mind cutting up</li><li fr-original-style="" style="box-sizing: border-box;">celebratory cards</li></ul>Please also have access to A3 card (you can buy these from craft stores) ; scissors, glue.You can go super creative here as much as you would like; feathers, sparkle. you could even connect with the outdoors if you know how to preseve your items.&nbsp;

When it comes to designing our dream future, there are a few aspects to be considered...
Firstly, amongst the chaos, how often do we actually create space to think about what we genuinely want for ourselves?
And then when we do, are they our own desires, or someone else's?
Vision boards help you to gain clarity on what you truly want from life
I will teach you to connect back in with your core values, an overview behind manifestation and how our early life experiences may have impacted us now (positively and negatively).
Experience a short meditation to clear and open the mind
Identify your big dreams and goals, your values and how this aligns with your identity and purpose.
Create your unique vision board from scratch.
The Workshop will be a hybrid of meditation, fun and networking helping you to connect back in with who you truly are, your centre of creativity, and visualise your dream life.
This is for you if you say yes to one or more of the following:
you are ready to explore what you want from life
you feel stuck and uninspired
you have a vision, but you want to have a daily reminder of your dreams and goals
you want to manifest your vision or dream life quicker
you would like to passionately connect with your goals and dreams
you would like to connect with your sacral chakra and instil some creativity into your energy
Are you ready to create the life that lights you up?


Resources required: 
Everyone: Notepad + pen, quiet space for reflection. 

If you know you definitely want to create your Vision Board on your Computer, then please come ready with access to Microsoft word or Canva. 

Otherwise (and this is my favourite way to start a vision board experience), you will also need;

Access to images that you can cut out. Here are some ideas on building your portfolio of images:
buy your favourite magazine/ ask around your friends/ family if you can have it rather than being thrown away
local supermarkets that offer their free magazine
travel agents
keep hold of local magazines/ newspapers/ flyers dropped through the door
photos that you don't mind cutting up
celebratory cards

Please also have access to A3 card (you can buy these from craft stores) ; scissors, glue.

You can go super creative here as much as you would like; feathers, sparkle. you could even connect with the outdoors if you know how to preseve your items. 

Sinéad Robertson

Personal Development

Mindfulness

Life Coaching

Manifestation & Law of Attraction

Meditation

Creative Therapy

𝐃𝐢𝐝 𝐘𝐨𝐮 𝐤𝐧𝐨𝐰?
😍Vision Boards improves your chance of success! 
Here's just a few benefits from the process of vision boarding ⤵️
🔸 Helps you to connect with what you truly want from life;
🔸 Shift your mindset;
🔸 Provides a tool to align and focus your goals
And are a great opportunity to meet new and like minded people!
I'm looking forward to hosting this vision board workshop with you.  
🙏🏻Give me a shout if you have any questions.

Design your Dream Life Vision Board

Who should attend? All governing boards should designate a governor for mental health and wellbeing to provide strategic support and oversight for the school/colleges Designated Senior Mental Health Lead and the wider SLT. This masterclass is also valuable for all governors, not just the nominated Mental Health and Wellbeing Governor, as all governors have strategic leadership responsibility for ensuring effective whole school / college approaches are in place, as outlined in KCSIE. 

Overview 

This expert-led training course will provide you with a comprehensive understanding of the role of the designated governor for mental health and wellbeing. You will gain the skills and confidence needed to help your governing body to ensure that there is a consistent and effective whole-school approach to mental health and wellbeing in place in your school / college.Delivered live-online by one of our mental health experts, the course will allow you to learn in a live real-time environment, with a range of discussion points, activities, and Q&amp;A session to ensure that you are able to complete the training with a clear understanding of the role of governance as part of the whole school/college approach.It is based on the following statutory and non-statutory guidance documents:<ul fr-original-style="" style="box-sizing: border-box;"><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">The DfE&rsquo;s Governance guidance (2024)</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Keeping Children Safe in Education (2024)</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Promoting Children and Young People&#39;s Mental Health and Wellbeing (2021)</li></ul>Mental Health and Behaviour in Schools (2018) Learning Objectives 

This course will enable you to:<ul fr-original-style="" style="box-sizing: border-box;"><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Understand the requirements of the role of the governor for mental health and wellbeing and the importance of prioritising the mental health and wellbeing of both pupils and staff in your setting.</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Develop your knowledge of what an effective whole school/college approach to mental health and wellbeing looks like, which includes effective prevention.</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Understand the role of the Designated Senior Mental Health Lead, and how best to support, scrutinise and challenge them in the development of an effective whole school / college approach.</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Understand the importance of embedding a culture of wellbeing for staff as well as pupils</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Understand the importance of developing an effective curriculum to promote good mental health and wellbeing.</li></ul><a href="https://www.brightcoreconsultancy.com/brightcore-testimonials" target="_blank" style="font-size: 14px; font-family: Helvetica, Arial, sans-serif; color: rgb(255, 255, 255); font-weight: bold; text-decoration: none; border-radius: 5px; background-color: rgb(61, 86, 224); border-width: 12px 18px; border-style: solid; border-color: rgb(61, 86, 224); display: inline-block; user-select: auto; box-sizing: border-box; cursor: pointer;" rel="noopener noreferrer" fr-original-style="font-size: 14px; font-family: Helvetica, Arial, sans-serif; color: #ffffff; font-weight: bold; text-decoration: none; border-radius: 5px; background-color: #3D56E0; border-top: 12px solid #3D56E0; border-bottom: 12px solid #3D56E0; border-right: 18px solid #3D56E0; border-left: 18px solid #3D56E0; display: inline-block;">View all testimonials </a>

Who should attend?
All governing boards should designate a governor for mental health and wellbeing to provide strategic support and oversight for the school/colleges Designated Senior Mental Health Lead and the wider SLT. This masterclass is also valuable for all governors, not just the nominated Mental Health and Wellbeing Governor, as all governors have strategic leadership responsibility for ensuring effective whole school / college approaches are in place, as outlined in KCSIE.

Overview

This expert-led training course will provide you with a comprehensive understanding of the role of the designated governor for mental health and wellbeing. You will gain the skills and confidence needed to help your governing body to ensure that there is a consistent and effective whole-school approach to mental health and wellbeing in place in your school / college.
Delivered live-online by one of our mental health experts, the course will allow you to learn in a live real-time environment, with a range of discussion points, activities, and Q&A session to ensure that you are able to complete the training with a clear understanding of the role of governance as part of the whole school/college approach.
It is based on the following statutory and non-statutory guidance documents:
The DfE’s Governance guidance (2024)
Keeping Children Safe in Education (2024)
Promoting Children and Young People's Mental Health and Wellbeing (2021)
Mental Health and Behaviour in Schools (2018)

Learning Objectives

This course will enable you to:
Understand the requirements of the role of the governor for mental health and wellbeing and the importance of prioritising the mental health and wellbeing of both pupils and staff in your setting.
Develop your knowledge of what an effective whole school/college approach to mental health and wellbeing looks like, which includes effective prevention.
Understand the role of the Designated Senior Mental Health Lead, and how best to support, scrutinise and challenge them in the development of an effective whole school / college approach.
Understand the importance of embedding a culture of wellbeing for staff as well as pupils
Understand the importance of developing an effective curriculum to promote good mental health and wellbeing.
View all testimonials

Brightcore Consultancy

Child Safeguarding

Safeguarding

This expert-led training course will provide you with a comprehensive understanding of the role of the designated governor for mental health and wellbeing. 

Taking on the role of Mental Health and Wellbeing Governor

Welcome to our premier destination for clinical hypnotherapists and trainee clinical hypnotherapists seeking to elevate their knowledge and practice to new heights!&nbsp;Introducing our weekly masterclass series designed to guide practitioners from foundational principles to advanced mastery.Embark on a transformative journey with us as we delve into the art and science of clinical hypnotherapy, starting from the very basics and progressing seamlessly to advanced techniques. Whether you&#39;re a seasoned professional looking to sharpen your skills or a newcomer eager to explore the realm of hypnotherapy, our comprehensive masterclass programme offers something for everyone.Starting in May and again in September, our carefully curated curriculum is structured to coincide with term times, ensuring maximum convenience and flexibility for busy practitioners. Each week, participants will have the opportunity to gain invaluable insights, and hone their craft through immersive learning experiences.Join a community of like-minded professionals dedicated to pushing the boundaries of clinical hypnotherapy. Whether you&#39;re seeking to expand your client base, enhance treatment outcomes, or simply deepen your understanding of the field, our masterclass series provides the tools, guidance, and support you need to thrive.Don&#39;t miss this opportunity to unlock your full potential as a clinical hypnotherapist. Enroll now and embark on a journey of growth, discovery, and transformation. Let&#39;s elevate your practice together!

Welcome to our premier destination for clinical hypnotherapists and trainee clinical hypnotherapists seeking to elevate their knowledge and practice to new heights! 
Introducing our weekly masterclass series designed to guide practitioners from foundational principles to advanced mastery.
Embark on a transformative journey with us as we delve into the art and science of clinical hypnotherapy, starting from the very basics and progressing seamlessly to advanced techniques. Whether you're a seasoned professional looking to sharpen your skills or a newcomer eager to explore the realm of hypnotherapy, our comprehensive masterclass programme offers something for everyone.
Starting in May and again in September, our carefully curated curriculum is structured to coincide with term times, ensuring maximum convenience and flexibility for busy practitioners. Each week, participants will have the opportunity to gain invaluable insights, and hone their craft through immersive learning experiences.
Join a community of like-minded professionals dedicated to pushing the boundaries of clinical hypnotherapy. Whether you're seeking to expand your client base, enhance treatment outcomes, or simply deepen your understanding of the field, our masterclass series provides the tools, guidance, and support you need to thrive.
Don't miss this opportunity to unlock your full potential as a clinical hypnotherapist. Enroll now and embark on a journey of growth, discovery, and transformation. Let's elevate your practice together!

The Northern College Of Clinical Hypnotherapy

Accredited Hypnotherapy

Each week, participants will have the opportunity to gain invaluable insights, and hone their craft through immersive learning experiences.

The Monday Masterclass

A standalone 10-week course - 2 hours per week online with daytime and evening options - that will introduce you to the materials, tools, and techniques used in quilling and to Craft4Smiles C.I.C and our tutors. &nbsp; At the end of each session you will have a lovely quilled item to show family and friends or to display on your shelf! You will be told about the other courses we offer so that you can make an informed choice about further learning. Participants in this course often move on to our Introduction to Paper Craft and Mixed Media Course that will introduce you to the basic materials, tools, equipment and techniques used. Experience has shown us that participants for whom English is not their first language, have found that quilling has helped them improve their understanding and spoken English as there is a lot of repetition of basic terms including numbers, colours and directions. Working with someon for whom English is their first language is also helpful.&nbsp;ProgrammeWeek 1: Basic Shapes (1)Week 2: Basic Shapes and Use of a Quilling Comb (2)&nbsp;Week 3: Flower and Butterfly: Picture 8&rdquo; x 10&rdquo;Week 4: Making a Shape to Hold Quilled Pieces: Capital LetterWeek 6: Basket of FlowersWeek 7: Cherry Blossom BoxWeek 8: 2 x 5&rdquo; x 7&rdquo; Pictures: Duck and BoatWeek 11: Pot of Lavender (1)&nbsp;Week 10: Pot of Lavender (2)You will receive all the materials and items of equipment needed to complete the course. These are yours to keep:&nbsp;Materials and Equipment&nbsp;Quilling Kit:&nbsp;Quilling Paper Strips: 39 mm: a variety of coloursQuilling Paper Strips: 39 mm: whiteQuilling BoardNeedlemaker&#39;s Wheel of PinsQuilling Formers x 2&nbsp;Quilling Comb1 Pair TweezersPokey ToolQuilling Tool: ShortQuilling Tool: LongScissorsGlue ApplicatorBook Binders&rsquo; Glue 30 mlBlack and white 300 gsm card for box and pictureCraft4Smiles C.I.C. is crafting community that&nbsp;provides accessible high quality creative papercraft and mixed media online programmes for adults. Our courses are social and interactive whether delivered online or in-person. Our aim is to introduce and build crafting skills and the basic skills needed for success in the workplace and at home, including self-confidence, problem solving, communicating in a group, basic maths and English. We teach over 45 different paper craft and mixed media techniques. Each course is carefully constructed to help you develop your crafting skills and knowledge. &nbsp;Crafting and our courses are mindful, taking us away from the day-to-day. Participants have consistently reported improvements in their wellbeing. &nbsp;Anyone who wants to learn new skills can join our programmes. &nbsp;No previous experience of papercrafting or mixed media work is needed. We have delivered courses successfully in Cambridgeshire for 6 1/2 years and have worked with 280 Cambridges residents during this time. 86% of participants state that what we offer has helped to improve their wellbeing. 75% state that it has made a positive difference to their daily lives. &nbsp;Please note that the Cademy calenda/description states that this course is over 13 weeks. This is because the 10 weeks of the course are delivered over 13 weeks, during 3 of which, Craft4Smiles is closed for holidays!&nbsp;

A standalone 10-week course - 2 hours per week online with daytime and evening options - that will introduce you to the materials, tools, and techniques used in quilling and to Craft4Smiles C.I.C and our tutors. At the end of each session you will have a lovely quilled item to show family and friends or to display on your shelf! You will be told about the other courses we offer so that you can make an informed choice about further learning. Participants in this course often move on to our Introduction to Paper Craft and Mixed Media Course that will introduce you to the basic materials, tools, equipment and techniques used. Experience has shown us that participants for whom English is not their first language, have found that quilling has helped them improve their understanding and spoken English as there is a lot of repetition of basic terms including numbers, colours and directions. Working with someon for whom English is their first language is also helpful. 
Programme
Week 1: Basic Shapes (1)
Week 2: Basic Shapes and Use of a Quilling Comb (2) 
Week 3: Flower and Butterfly: Picture 8” x 10”
Week 4: Making a Shape to Hold Quilled Pieces: Capital Letter
Week 6: Basket of Flowers
Week 7: Cherry Blossom Box
Week 8: 2 x 5” x 7” Pictures: Duck and Boat
Week 11: Pot of Lavender (1) 
Week 10: Pot of Lavender (2)
You will receive all the materials and items of equipment needed to complete the course. These are yours to keep: 
Materials and Equipment
 Quilling Kit: 
Quilling Paper Strips: 39 mm: a variety of colours
Quilling Paper Strips: 39 mm: white
Quilling Board
Needlemaker's Wheel of Pins
Quilling Formers x 2 
Quilling Comb
1 Pair Tweezers
Pokey Tool
Quilling Tool: Short
Quilling Tool: Long
Scissors
Glue Applicator
Book Binders’ Glue 30 ml
Black and white 300 gsm card for box and picture
Craft4Smiles C.I.C. is crafting community that provides accessible high quality creative papercraft and mixed media online programmes for adults. Our courses are social and interactive whether delivered online or in-person. Our aim is to introduce and build crafting skills and the basic skills needed for success in the workplace and at home, including self-confidence, problem solving, communicating in a group, basic maths and English. We teach over 45 different paper craft and mixed media techniques. Each course is carefully constructed to help you develop your crafting skills and knowledge. 
Crafting and our courses are mindful, taking us away from the day-to-day. Participants have consistently reported improvements in their wellbeing. Anyone who wants to learn new skills can join our programmes. No previous experience of papercrafting or mixed media work is needed. We have delivered courses successfully in Cambridgeshire for 6 1/2 years and have worked with 280 Cambridges residents during this time. 86% of participants state that what we offer has helped to improve their wellbeing. 75% state that it has made a positive difference to their daily lives. 
Please note that the Cademy calenda/description states that this course is over 13 weeks. This is because the 10 weeks of the course are delivered over 13 weeks, during 3 of which, Craft4Smiles is closed for holidays! 


Craft4Smiles C.I.C. 

A standalone 10-week quilling course - 2 hours per week online with daytime and evening options - that will introduce you to the materials, tools, and techniques used in quilling and to Craft4Smiles C.I.C and our tutors.   At the end of each session you will have a lovely quilled item to show family and friends or to display on your shelf!  All materials and equipment needed will be supplied and are yours to keep. This course is helpful for those for whom English is not their native tongue as there is a lot of repetition of basic terms including numbers, colours and directions.  

767 Courses in Bradford

NPORS MEWP Boom (N108)

By Dynamic Training and Assessments Ltd

Manual Handling Awareness

By Vp ESS Training

NPORS Industrial Counterbalance Lift Truck (N001)

By Dynamic Training and Assessments Ltd

Level 2 NVQ Diploma in Construction Plant or Machinery Maintenance

By Dynamic Training and Assessments Ltd

Level 2 NVQ Certificate in Plant Operations - Cranes and Specialist Lifting

By Dynamic Training and Assessments Ltd

Level 2 Diploma in Piling Operations - Piling Rig Operator

By Dynamic Training and Assessments Ltd

NPORS Telescopic Handler (N010)

By Dynamic Training and Assessments Ltd

NPORS MEWP Scissor Lift (N109)

By Dynamic Training and Assessments Ltd

Developing Personal Resilience as a Leader

By Mpi Learning - Professional Learning And Development Provider

NPORS Forward Tipping Dumper (N204)

By Dynamic Training and Assessments Ltd

Search By Location