Name: Automatic Driving Lessons London
Price: 40 GBP
Availability: InStock

Nottinghamshire

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Overview</h2>This course is aimed at candidates that require the knowledge and practical skills to operate 360 excavator for lifting operations.The NPORS Excavator 360 qualification is required to gain the bolt on unit.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Course Content</h2>Candidates will be able to:<ul style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><li fr-original-style="" style="box-sizing: border-box;">Understand the industry, the dangers of working in the industry and their responsibilities as an operator</li><li fr-original-style="" style="box-sizing: border-box;">Conform to manufacturers requirements as per technical data, conform to relevant regulations and legislation</li><li fr-original-style="" style="box-sizing: border-box;">Locate, identify and explain safe working loads, lifting capacity charts and explain different lifting configurations and working ranges</li><li fr-original-style="" style="box-sizing: border-box;">Identify and explain different lifting procedures and explain what task could fall into each category</li><li fr-original-style="" style="box-sizing: border-box;">Identify and explain centres of gravity and calculate estimated weights of loads</li><li fr-original-style="" style="box-sizing: border-box;">Identify any overhead/proximity hazards</li><li fr-original-style="" style="box-sizing: border-box;">Agree the signal codes/hand signals, direction of movement, safe working and safe landing and placement zone with the slinger/signaller</li><li fr-original-style="" style="box-sizing: border-box;">Ensure the excavator is in a safe condition for attachments to be fitted</li><li fr-original-style="" style="box-sizing: border-box;">Check load integrity and security by carrying out trial lifts</li><li fr-original-style="" style="box-sizing: border-box;">Lift and move a load to a designated position in a safe and controlled manner ensuring minimum uncontrolled movement</li><li fr-original-style="" style="box-sizing: border-box;">Understand environmental considerations</li><li fr-original-style="" style="box-sizing: border-box;">Carry out all out of service and securing procedures</li></ul><div style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><h2 fr-original-style="" style="box-sizing: border-box;">Entry Requirements</h2></div>NPORS CSCS &ndash; Candidates must have achieved the relevant CITB Health, Safety &amp; Environment (HS&amp;E) touch-screen-test within 2 years.Good understanding of spoken and written English.<div style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><h2 fr-original-style="" style="box-sizing: border-box;">Duration</h2></div>Novice course- 5 days depending on experienceExperienced worker tests- 1 day theory and practical assessment<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Location</h2>Customer Site (Training &amp; Testing) &ndash; Site must adhere to NPORS specifications

Overview
This course is aimed at candidates that require the knowledge and practical skills to operate 360 excavator for lifting operations.
The NPORS Excavator 360 qualification is required to gain the bolt on unit.
Course Content
Candidates will be able to:
Understand the industry, the dangers of working in the industry and their responsibilities as an operator
Conform to manufacturers requirements as per technical data, conform to relevant regulations and legislation
Locate, identify and explain safe working loads, lifting capacity charts and explain different lifting configurations and working ranges
Identify and explain different lifting procedures and explain what task could fall into each category
Identify and explain centres of gravity and calculate estimated weights of loads
Identify any overhead/proximity hazards
Agree the signal codes/hand signals, direction of movement, safe working and safe landing and placement zone with the slinger/signaller
Ensure the excavator is in a safe condition for attachments to be fitted
Check load integrity and security by carrying out trial lifts
Lift and move a load to a designated position in a safe and controlled manner ensuring minimum uncontrolled movement
Understand environmental considerations
Carry out all out of service and securing procedures
Entry Requirements
NPORS CSCS – Candidates must have achieved the relevant CITB Health, Safety & Environment (HS&E) touch-screen-test within 2 years.
Good understanding of spoken and written English.
Duration
Novice course- 5 days depending on experience
Experienced worker tests- 1 day theory and practical assessment
Location
Customer Site (Training & Testing) – Site must adhere to NPORS specifications

Dynamic Training and Assessments Ltd

Construction

CSCS (Construction Skills Certification Scheme)

NPORS

NPORS Excavator as a Crane (N100)

Course information&nbsp;It is envisaged that by the end of this course of training, the learner will be able to answer questions on and perform the following:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operator.</li><li fr-original-style="" style="box-sizing: border-box;">Have a working knowledge of the manufacturer&rsquo;s handbook for the particular machine to be used.</li><li fr-original-style="" style="box-sizing: border-box;">Be able to locate and identify the major components of the machine and explain their functions.</li><li fr-original-style="" style="box-sizing: border-box;">Be able to locate and identify key controls and explain their functions.</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all pre-operational checks in accordance with manufacturers and legislative requirements.</li><li fr-original-style="" style="box-sizing: border-box;">Identify and maintain PPE appropriate for plant mover use.</li><li fr-original-style="" style="box-sizing: border-box;">Prepare machinery for use and operate machinery safely and efficiently.</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all necessary safety checks at the work area.</li><li fr-original-style="" style="box-sizing: border-box;">Environmental considerations.</li><li fr-original-style="" style="box-sizing: border-box;">Storage and transport of machinery attachments.</li><li fr-original-style="" style="box-sizing: border-box;">Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation.</li><li fr-original-style="" style="box-sizing: border-box;">Carry out all end of shift and shut down procedures.</li></ul>Entry requirements&nbsp;In order to be eligible to undertake NPORS testing.Good understanding of spoken and written English.__________________________________________________________________________________Assessment&nbsp;Assessment will be to NPORS standards consisting of a theory test and practical test.__________________________________________________________________________________CertificationNPORS Traditional card &ndash; With the traditional card, there is no requirements to complete an NVQ, a five-year card is issued and after five years reassessment is required.&nbsp;NPORS CSCS &ndash; To ensure that the operator is able to receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card, the candidate will be required to complete an NVQ in the specific item of plant.&nbsp;

Course information 
It is envisaged that by the end of this course of training, the learner will be able to answer questions on and perform the following:
Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operator.
Have a working knowledge of the manufacturer’s handbook for the particular machine to be used.
Be able to locate and identify the major components of the machine and explain their functions.
Be able to locate and identify key controls and explain their functions.
Conduct all pre-operational checks in accordance with manufacturers and legislative requirements.
Identify and maintain PPE appropriate for plant mover use.
Prepare machinery for use and operate machinery safely and efficiently.
Conduct all necessary safety checks at the work area.
Environmental considerations.
Storage and transport of machinery attachments.
Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation.
Carry out all end of shift and shut down procedures.
Entry requirements 
In order to be eligible to undertake NPORS testing.
Good understanding of spoken and written English.
__________________________________________________________________________________
Assessment 
Assessment will be to NPORS standards consisting of a theory test and practical test.
__________________________________________________________________________________
Certification
NPORS Traditional card – With the traditional card, there is no requirements to complete an NVQ, a five-year card is issued and after five years reassessment is required. 
NPORS CSCS – To ensure that the operator is able to receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card, the candidate will be required to complete an NVQ in the specific item of plant. 

NPORS Plant Mover - Non Operational Duties (N132)

Loughborough

<div>
		

		<div>
			
			One of the keys to success today is our ability to effectively influence others. 
			<div> 2 Hours</div>
			<div> £378.00 incl. VAT</div>
			
			
		</div>
	</div>

	

	<div id="filters">
		
		
	</div>

	

 <div>

		
		 
		

		<div></div>

		<div>
			Want to run this event in-house? Enquire about running this event in-house 
			
		</div>

		<div>
			Interested in attending? Have a suggestion about running this event near you? Register your interest now
			
		</div>
	</div>
	<div></div>
	
		
 <div>
			
		</div>
				

	
		<h3>Description</h3>
		One of the keys to success today is our ability to effectively influence others. Using the techniques that you learn on this workshop will enable you to influence to change the behaviour of others and produce an effective result without the apparent exertion of direct command or power.
Negotiations can take many forms and can be time-consuming and exhausting. Most employees negotiate without having received any formal training and this can lead to the loss of the object of the negotiation or obtaining a result which is less than satisfactory.
Available as private Face to Face and virtual sessions (max 12 delegates) - £1,305 Plus VAT

	
		<h3>Modules/Lessons</h3>
		Outcomes: 
<ul>
<li>Detail the factors which impact on your ability to Influence</li>
<li>List the six principles of Persuasion</li>
<li>Describe the difference between Influence and Power</li>
<li>State the five potential outcomes for a Negotiation</li>
<li>Explain what to consider when planning to Negotiate</li>
</ul>
Content:
<ul>
<li>The Situations we Face - The Four Circles Model</li>
<li>Leadership is an Influencing process</li>
<li>The difference between Influence and Power</li>
<li>The two factors we judge people on</li>
<li>The Four Elements of Trust</li>
<li>The Six Principles of Influence</li>
<li>Knowing your Outcome</li>
<li>Five Potential Results of a Negotiation</li>
<li>Want v's Need</li>
<li>Walk Away</li>
</ul>
The Situations we Face - The Four Circles Model
<ul>
<li>Understanding how to manage situations we can/can't control, can/can't influence and the choices that we have for our behaviour.</li>
<li>The difference between a reaction and a response</li>
</ul>
What is Leadership?
<ul>
<li>Defining leadership</li>
<li>Are Influence and Power the same?</li>
<li>The role played by trust and respect</li>
<li>The Blanchard ABCD Model of Trust</li>
</ul>
The Six Principles of Persuasion
<ul>
<li>Outlined in 'Influence - The Psychology of Persuasion' by Robert Cialdini</li>
<li>How can we use the principles?</li>
<li>Knowing Your Outcome - thinking backwards rather than forwards</li>
</ul>
Negotiation
<ul>
<li>What are the five potential outcomes of a negotiation?</li>
<li>Negotiation and Motivation</li>
<li>Separating Wants from Needs</li>
<li>The importance of knowing when to walk away</li>
</ul>

One of the keys to success today is our ability to effectively influence others. 
2 Hours £378.00 incl. VAT
Want to run this event in-house? Enquire about running this event in-house 
Interested in attending? Have a suggestion about running this event near you?
Register your interest now
Description

One of the keys to success today is our ability to effectively influence others. Using the techniques that you learn on this workshop will enable you to influence to change the behaviour of others and produce an effective result without the apparent exertion of direct command or power.
Negotiations can take many forms and can be time-consuming and exhausting. Most employees negotiate without having received any formal training and this can lead to the loss of the object of the negotiation or obtaining a result which is less than satisfactory.
Available as private Face to Face and virtual sessions (max 12 delegates) - £1,305 Plus VAT

Modules/Lessons

Outcomes: 
Detail the factors which impact on your ability to Influence
List the six principles of Persuasion
Describe the difference between Influence and Power
State the five potential outcomes for a Negotiation
Explain what to consider when planning to Negotiate
Content:
The Situations we Face - The Four Circles Model
Leadership is an Influencing process
The difference between Influence and Power
The two factors we judge people on
The Four Elements of Trust
The Six Principles of Influence
Knowing your Outcome
Five Potential Results of a Negotiation
Want v's Need
Walk Away
The Situations we Face - The Four Circles Model
Understanding how to manage situations we can/can't control, can/can't influence and the choices that we have for our behaviour.
The difference between a reaction and a response
What is Leadership?
Defining leadership
Are Influence and Power the same?
The role played by trust and respect
The Blanchard ABCD Model of Trust
The Six Principles of Persuasion
Outlined in 'Influence - The Psychology of Persuasion' by Robert Cialdini
How can we use the principles?
Knowing Your Outcome - thinking backwards rather than forwards
Negotiation
What are the five potential outcomes of a negotiation?
Negotiation and Motivation
Separating Wants from Needs
The importance of knowing when to walk away


Mpi Learning - Professional Learning And Development Provider

One of the keys to success today is our ability to effectively influence others.

Influencing Skills

General Admission

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Overview</h2>This course is for candidates who are required to operate 360 re handlers to lift, move and transport materials. This course will give the candidate the required knowledge and skills to carry this task out safely and efficiently.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Course Content</h2>Candidates will be able to:<ul style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><li fr-original-style="" style="box-sizing: border-box;">Understand the industry, the dangers of working in the industry and their responsibilities as a plant operator</li><li fr-original-style="" style="box-sizing: border-box;">Understand the manufacturer&rsquo;s handbook for the particular machine to be used</li><li fr-original-style="" style="box-sizing: border-box;">Locate and identify the major components of the machine and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Locate and identify steering, driving and braking controls and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all pre-operational checks in accordance with manufacturer&rsquo;s and legislative requirements</li><li fr-original-style="" style="box-sizing: border-box;">Safely mount and dismount the machine</li><li fr-original-style="" style="box-sizing: border-box;">Start and stop the engine and safely move the machine off and stop it safely</li><li fr-original-style="" style="box-sizing: border-box;">Configure the machine for travel and manoeuvre it safely across varying terrain in open and confined areas</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all necessary safety checks at the work area</li><li fr-original-style="" style="box-sizing: border-box;">Manoeuvre the machine to the work area and correctly configure in readiness to carry out processing tasks</li><li fr-original-style="" style="box-sizing: border-box;">Carry out processing task</li><li fr-original-style="" style="box-sizing: border-box;">Load material onto transporting vehicles, containers or processing plant</li><li fr-original-style="" style="box-sizing: border-box;">Fit and remove attachments</li><li fr-original-style="" style="box-sizing: border-box;">Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation</li><li fr-original-style="" style="box-sizing: border-box;">Carry out all end of shift and shut down procedures</li></ul><h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Entry Requirements</h2>NPORS CSCS &ndash; Candidates must have achieved the relevant CITB Health, Safety &amp; Environment (HS&amp;E) touch-screen-test within 2 years.Good understanding of spoken and written English.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Duration</h2>Novice course &ndash; 5 daysExperienced worker tests &ndash; 1 day theory and practical assessment<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Location</h2>Customer Site (Training &amp; Testing) &ndash; Site must adhere to NPORS specifications

Overview
This course is for candidates who are required to operate 360 re handlers to lift, move and transport materials. This course will give the candidate the required knowledge and skills to carry this task out safely and efficiently.
Course Content
Candidates will be able to:
Understand the industry, the dangers of working in the industry and their responsibilities as a plant operator
Understand the manufacturer’s handbook for the particular machine to be used
Locate and identify the major components of the machine and explain their functions
Locate and identify steering, driving and braking controls and explain their functions
Conduct all pre-operational checks in accordance with manufacturer’s and legislative requirements
Safely mount and dismount the machine
Start and stop the engine and safely move the machine off and stop it safely
Configure the machine for travel and manoeuvre it safely across varying terrain in open and confined areas
Conduct all necessary safety checks at the work area
Manoeuvre the machine to the work area and correctly configure in readiness to carry out processing tasks
Carry out processing task
Load material onto transporting vehicles, containers or processing plant
Fit and remove attachments
Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation
Carry out all end of shift and shut down procedures
Entry Requirements
NPORS CSCS – Candidates must have achieved the relevant CITB Health, Safety & Environment (HS&E) touch-screen-test within 2 years.
Good understanding of spoken and written English.
Duration
Novice course – 5 days
Experienced worker tests – 1 day theory and practical assessment
Location
Customer Site (Training & Testing) – Site must adhere to NPORS specifications

NPORS Material Re - Handler (N722)

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Overview</h2>This course is aimed at candidates that require the knowledge and practical skills to prepare, attach, guide and move suspended loads using a range of lifting accessories. It will enable the candidate to carry out their duties while complying with LOLER regulations.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Course Content</h2>Candidates will be able to:<ul style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><li fr-original-style="" style="box-sizing: border-box;">Understand the industry, the dangers of working in the industry and their responsibilities as a Slinger Signaller</li><li fr-original-style="" style="box-sizing: border-box;">Conform to relevant regulations, legislation and manufacturers requirements as per technical data</li><li fr-original-style="" style="box-sizing: border-box;">Locate, identify and explain different types of lifting equipment and lifting accessories.</li><li fr-original-style="" style="box-sizing: border-box;">Explain their basic construction, uses, applications and their functions</li><li fr-original-style="" style="box-sizing: border-box;">Interpret and extract information on all relevant documentation</li><li fr-original-style="" style="box-sizing: border-box;">Undertake all pre-use checks on non-specialist lifting accessories and identify non-serviceable items</li><li fr-original-style="" style="box-sizing: border-box;">Explain procedures for placing non-serviceable items out-of-service</li><li fr-original-style="" style="box-sizing: border-box;">Identify and explain centres of gravity and calculate estimated weights of loads</li><li fr-original-style="" style="box-sizing: border-box;">Set up exclusion zones explaining actions required for emergency actions and identifying any overhead hazards</li><li fr-original-style="" style="box-sizing: border-box;">Identify and maintain PPE appropriate for Slinger Signaller use</li><li fr-original-style="" style="box-sizing: border-box;">Secure various types of loads to a hook using the relevant lifting accessories and procedures ensuring load balance, security and integrity</li><li fr-original-style="" style="box-sizing: border-box;">Direct and guide the movement of loads to different types of location using different methods of communication</li><li fr-original-style="" style="box-sizing: border-box;">Understand environmental considerations</li><li fr-original-style="" style="box-sizing: border-box;">Carry out all out-of service and securing procedures</li></ul><h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Entry Requirements</h2>NPORS CSCS &ndash; Candidates must have achieved the relevant CITB Health, Safety &amp; Environment (HS&amp;E) touch-screen-test within 2 years.Good understanding of spoken and written English.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Duration</h2>Novice course &ndash; 2 DaysExperienced Worker Tests- 1 Day theory and practical assessment<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Location</h2>Customer Site (Training &amp; Testing) &ndash; Site must adhere to NPORS specifications

Overview
This course is aimed at candidates that require the knowledge and practical skills to prepare, attach, guide and move suspended loads using a range of lifting accessories. It will enable the candidate to carry out their duties while complying with LOLER regulations.
Course Content
Candidates will be able to:
Understand the industry, the dangers of working in the industry and their responsibilities as a Slinger Signaller
Conform to relevant regulations, legislation and manufacturers requirements as per technical data
Locate, identify and explain different types of lifting equipment and lifting accessories.
Explain their basic construction, uses, applications and their functions
Interpret and extract information on all relevant documentation
Undertake all pre-use checks on non-specialist lifting accessories and identify non-serviceable items
Explain procedures for placing non-serviceable items out-of-service
Identify and explain centres of gravity and calculate estimated weights of loads
Set up exclusion zones explaining actions required for emergency actions and identifying any overhead hazards
Identify and maintain PPE appropriate for Slinger Signaller use
Secure various types of loads to a hook using the relevant lifting accessories and procedures ensuring load balance, security and integrity
Direct and guide the movement of loads to different types of location using different methods of communication
Understand environmental considerations
Carry out all out-of service and securing procedures
Entry Requirements
NPORS CSCS – Candidates must have achieved the relevant CITB Health, Safety & Environment (HS&E) touch-screen-test within 2 years.
Good understanding of spoken and written English.
Duration
Novice course – 2 Days
Experienced Worker Tests- 1 Day theory and practical assessment
Location
Customer Site (Training & Testing) – Site must adhere to NPORS specifications

NPORS Slinger / Signaller (N402)

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Overview</h2>This course is aimed at candidates that require the knowledge and practical skills to operate 360&deg; excavators to excavate and load materials.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Course Content</h2>Candidates will be able to:<ul style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><li fr-original-style="" style="box-sizing: border-box;">Understand the industry, the dangers of working in the industry and their responsibilities as a plant operator</li><li fr-original-style="" style="box-sizing: border-box;">Understand the manufacturer&rsquo;s handbook for the particular machine to be used</li><li fr-original-style="" style="box-sizing: border-box;">Locate and identify the major components of the machine and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Locate and identify steering, driving and braking controls and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Identify and maintain PPE appropriate for excavator use</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all pre-operational checks in accordance with manufacturer&rsquo;s and legislative requirements</li><li fr-original-style="" style="box-sizing: border-box;">Safely mount and dismount the machine</li><li fr-original-style="" style="box-sizing: border-box;">Start and stop the engine and safely move the machine off and stop it safely</li><li fr-original-style="" style="box-sizing: border-box;">Configure the machine for travel and manoeuvre it safely across varying terrain in open and confined areas</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all necessary safety checks at the work area</li><li fr-original-style="" style="box-sizing: border-box;">Manoeuvre the machine to the work area and correctly configure in readiness to carry out excavating tasks</li><li fr-original-style="" style="box-sizing: border-box;">Carry out excavating tasks</li><li fr-original-style="" style="box-sizing: border-box;">Load material onto transporting vehicles or into containers</li><li fr-original-style="" style="box-sizing: border-box;">Reinstate excavation, grade and level ground</li><li fr-original-style="" style="box-sizing: border-box;">Fit and remove attachments</li><li fr-original-style="" style="box-sizing: border-box;">Carry out all end of shift and shut down procedures</li></ul><h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Entry Requirements</h2>NPORS CSCS &ndash; Candidates must have achieved the relevant CITB Health, Safety &amp; Environment (HS&amp;E) touch-screen-test within 2 years.Good understanding of spoken and written English.<div style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><h2 fr-original-style="" style="box-sizing: border-box;">Duration</h2></div>Novice course &ndash; 10 Days depending upon experienceExperienced worker tests &ndash; 1 day theory and practical assessment<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Location</h2>Customer Site (Training &amp; Testing) &ndash; Site must adhere to NPORS specifications

Overview
This course is aimed at candidates that require the knowledge and practical skills to operate 360° excavators to excavate and load materials.
Course Content
Candidates will be able to:
Understand the industry, the dangers of working in the industry and their responsibilities as a plant operator
Understand the manufacturer’s handbook for the particular machine to be used
Locate and identify the major components of the machine and explain their functions
Locate and identify steering, driving and braking controls and explain their functions
Identify and maintain PPE appropriate for excavator use
Conduct all pre-operational checks in accordance with manufacturer’s and legislative requirements
Safely mount and dismount the machine
Start and stop the engine and safely move the machine off and stop it safely
Configure the machine for travel and manoeuvre it safely across varying terrain in open and confined areas
Conduct all necessary safety checks at the work area
Manoeuvre the machine to the work area and correctly configure in readiness to carry out excavating tasks
Carry out excavating tasks
Load material onto transporting vehicles or into containers
Reinstate excavation, grade and level ground
Fit and remove attachments
Carry out all end of shift and shut down procedures
Entry Requirements
NPORS CSCS – Candidates must have achieved the relevant CITB Health, Safety & Environment (HS&E) touch-screen-test within 2 years.
Good understanding of spoken and written English.
Duration
Novice course – 10 Days depending upon experience
Experienced worker tests – 1 day theory and practical assessment
Location
Customer Site (Training & Testing) – Site must adhere to NPORS specifications

NPORS Excavator 360 (N202)

Crafting and delivering powerful stories is how people persuade, inspire and unite those around them. Without a compelling narrative and great delivery, even the strongest ideas, proposals and appeals can be undervalued or misunderstood.Whether that&#39;s in a presentation, networking session, video conference, internal meeting or a major pitch - the ability to find and articulate a persuasive story is an invaluable skill.&nbsp;This training harnesses insight from psychology and neuroscience to ensure your story connects in a meaningful way.&nbsp;We cover the principles of crafting a compelling story to engage audiences, ensuring people feel inspired and energised by what you have to say.&nbsp;Course attendees: Minimum attendees: 4 people (Maximum 30) Please note: cost stated is per person

Crafting and delivering powerful stories is how people persuade, inspire and unite those around them. Without a compelling narrative and great delivery, even the strongest ideas, proposals and appeals can be undervalued or misunderstood.
Whether that's in a presentation, networking session, video conference, internal meeting or a major pitch - the ability to find and articulate a persuasive story is an invaluable skill. 
This training harnesses insight from psychology and neuroscience to ensure your story connects in a meaningful way. 
We cover the principles of crafting a compelling story to engage audiences, ensuring people feel inspired and energised by what you have to say. 
Course attendees:

Minimum attendees: 4 people (Maximum 30)
Please note: cost stated is per person

4and20Million.

Confidence

Presentation Skills

Storytelling

Create great presentations and persuasive narratives.  This session covers the principles of engaging an audience, from narrative structure to thinking about slides.  Put an end to Death by PowerPoint!

Compelling Storytelling

Cost per person

Belfast

AIMS AND OBJECTIVES<ul style="color: rgb(105, 105, 105); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(105, 105, 105);"><div style="color: rgb(105, 105, 105); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(105, 105, 105);">The aim of this course is to provide coaches and runners with a broad overview and insight into the key areas of running namely:</div><div style="color: rgb(105, 105, 105); box-sizing: border-box;" fr-original-style=" color: rgb(105, 105, 105);"><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Gait analysis,</li><li fr-original-style="" style="box-sizing: border-box;">Running styles,</li><li fr-original-style="" style="box-sizing: border-box;">Environment stressors</li><li fr-original-style="" style="box-sizing: border-box;">Training zones,</li><li fr-original-style="" style="box-sizing: border-box;">Menstrual cycle,</li><li fr-original-style="" style="box-sizing: border-box;">Planning and periodisation.</li></ul></div><div style="color: rgb(105, 105, 105); box-sizing: border-box;" fr-original-style=" color: rgb(105, 105, 105);"> </div><div style="color: rgb(105, 105, 105); box-sizing: border-box;" fr-original-style=" color: rgb(105, 105, 105);">By the end of the course coaches and runners will have a better understanding of key areas to look at and consider when running and working with a runner.</div></ul>PRE-REQUISITESA love for running

AIMS AND OBJECTIVES
The aim of this course is to provide coaches and runners with a broad overview and insight into the key areas of running namely:
Gait analysis,
Running styles,
Environment stressors
Training zones,
Menstrual cycle,
Planning and periodisation.
By the end of the course coaches and runners will have a better understanding of key areas to look at and consider when running and working with a runner.
PRE-REQUISITES
A love for running

Platinum Training Institute

Running

The aim of this course is to provide coaches and runners with a broad overview and insight into the key areas of running namely:
Gait analysis,
Running styles,
Environment stressors
Training zones,
Menstrual cycle,
Planning and periodisation.

Run Your Life - Running Foundations Workshop

Course information&nbsp;It is envisaged that by the end of this course of training the trainee operator will be able to answer questions on and perform the following:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as a plant operator.</li><li fr-original-style="" style="box-sizing: border-box;">Have a working knowledge of the manufacturer&rsquo;s handbook for the machine to be used and be familiar with other types of information sources and relevant legislation.</li><li fr-original-style="" style="box-sizing: border-box;">Be able to locate and identify steering, driving and braking controls and explain their functions conduct all pre-operational checks in accordance with manufacturers and legislative requirements and check all emergency lowering functions.</li><li fr-original-style="" style="box-sizing: border-box;">Safely mount and dismount the machine configure the machine for travel.</li><li fr-original-style="" style="box-sizing: border-box;">Configure the machine for travel and maneuver it safely on level/rough ground and inclines in open and confined areas.</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all necessary safety checks at the work area, including overhead and underground hazards maneuver the machine to work the area and correctly configure in readiness to carry out accessing tasks at various points up to full operating height.</li><li fr-original-style="" style="box-sizing: border-box;">Travel with platform raised (where applicable)</li><li fr-original-style="" style="box-sizing: border-box;">Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation.</li><li fr-original-style="" style="box-sizing: border-box;">Carry out all end of shift and shut down procedures.</li></ul>Entry requirements&nbsp;In order to be eligible to undertake NPORS testing.Good understanding of spoken and written English.__________________________________________________________________________________Assessment&nbsp;Assessment will be to NPORS standards consisting of a theory test and practical test. &nbsp;CertificationNPORS Traditional card &ndash;&nbsp;With the traditional card there is no requirements to complete an NVQ, a five-year card is issued and after five years reassessment is required.&nbsp;NPORS CSCS &ndash;&nbsp;To ensure that the operator can receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant.&nbsp;

Course information 
It is envisaged that by the end of this course of training the trainee operator will be able to answer questions on and perform the following:
Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as a plant operator.
Have a working knowledge of the manufacturer’s handbook for the machine to be used and be familiar with other types of information sources and relevant legislation.
Be able to locate and identify steering, driving and braking controls and explain their functions conduct all pre-operational checks in accordance with manufacturers and legislative requirements and check all emergency lowering functions.
Safely mount and dismount the machine configure the machine for travel.
Configure the machine for travel and maneuver it safely on level/rough ground and inclines in open and confined areas.
Conduct all necessary safety checks at the work area, including overhead and underground hazards maneuver the machine to work the area and correctly configure in readiness to carry out accessing tasks at various points up to full operating height.
Travel with platform raised (where applicable)
Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation.
Carry out all end of shift and shut down procedures.
Entry requirements 
In order to be eligible to undertake NPORS testing.
Good understanding of spoken and written English.
__________________________________________________________________________________
Assessment 
Assessment will be to NPORS standards consisting of a theory test and practical test. 
Certification
NPORS Traditional card – With the traditional card there is no requirements to complete an NVQ, a five-year card is issued and after five years reassessment is required. 
NPORS CSCS – To ensure that the operator can receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant. 

NPORS MEWP Boom (N108)

London

Pinner

<div data-padding='{"d":"45px 0% 45px 0% "}' data-padding-top="45px" style="color: rgb(73, 73, 73); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(73, 73, 73);"><div data-parallax-speed="0" fr-original-style="" style="box-sizing: border-box;"><div data-padding='{"d":"45px 0% 45px 0% "}' data-padding-top="45px" style="color: rgb(73, 73, 73); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(73, 73, 73);"><div data-parallax-speed="0" fr-original-style="" style="box-sizing: border-box;"><div data-parallax-speed="0" id="isPasted" fr-original-style="" style="box-sizing: border-box;">Automatic driving lessons with friendly, patient, experienced and fully qualified male and female driving instructors.Our current Automatic teaching vehicle is a Nissan Micra, which our students have again found has a simple logical layout and is easy to control with good all round visibility when driving, that is why we feel it is ideal as a learning car.</div><div data-animation="fadeInUp" data-parallax-speed="0" fr-original-style="" style="box-sizing: border-box;">In addition the car has the following features for our pupil&rsquo;s safety and comfort;<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">He-Man duel controls &ndash; for safety and to give students added confidence</li><li fr-original-style="" style="box-sizing: border-box;">Power assisted Steering &ndash; for comfort and ease of use</li><li fr-original-style="" style="box-sizing: border-box;">Electric Windows</li><li fr-original-style="" style="box-sizing: border-box;">Air Conditioning</li><li fr-original-style="" style="box-sizing: border-box;">Driver and passengers air-bags</li></ul>Having the right training vehicle is essential to maximising each learners chance of passing their test in as short a time as possible! Which is always our aim at Drive2Pass School of Motoring.</div></div><div data-animation="fadeInUp" data-parallax-speed="0" fr-original-style="" style="box-sizing: border-box;"> </div><div data-animation="fadeInUp" data-parallax-speed="0" fr-original-style="" style="box-sizing: border-box;"><img alt="Manual Driving Lessons London" title="Manual Driving Lessons London" src="https://drive2pass.biz/wp-content/uploads/2018/05/LRG_DSC03557.jpg" fr-original-style="" style="cursor: pointer; padding: 0px 1px; user-select: none; max-width: 100%; position: relative; box-sizing: border-box;" fr-original-class="fr-draggable"></div></div><div style="color: rgb(73, 73, 73); box-sizing: border-box;" fr-original-style=" color: rgb(73, 73, 73);"> </div></div><div data-animation="fadeInUp" data-parallax-speed="0" fr-original-style="" style="box-sizing: border-box;"><a href="https://drive2pass.biz/pass-plus/" data-gdpr-atts="{}" style="color: rgb(255, 255, 255); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(255, 255, 255);">FIND OUT MORE</a></div><div data-parallax-speed="0" fr-original-style="" style="box-sizing: border-box;">LONDON DRIVING LESSONS,&nbsp;<a href="https://drivingschool-ruislip.co.uk/" style="color: rgb(125, 184, 70); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(125, 184, 70);">RUISLIP</a>,&nbsp;<a href="https://drivingschool-harrow.co.uk/" style="color: rgb(125, 184, 70); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(125, 184, 70);">HARROW</a>,&nbsp;<a href="https://drivingschoolhillingdon.co.uk/" style="color: rgb(125, 184, 70); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(125, 184, 70);">HILLINGDON</a>,&nbsp;<a href="https://drivingschool-uxbridge.co.uk/" style="color: rgb(125, 184, 70); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(125, 184, 70);">UXBRIDGE</a>,&nbsp;<a href="https://drivingschool-wembley.co.uk/" style="color: rgb(125, 184, 70); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(125, 184, 70);">WEMBLEY</a>, PINNER,&nbsp;<a href="https://drivingschoolnorthwood.co.uk/" style="color: rgb(125, 184, 70); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(125, 184, 70);">NORTHWOOD</a>&nbsp;AND NORTHOLT</div></div><div style="color: rgb(73, 73, 73); box-sizing: border-box;" fr-original-style=" color: rgb(73, 73, 73);"> </div>

Automatic driving lessons with friendly, patient, experienced and fully qualified male and female driving instructors.
Our current Automatic teaching vehicle is a Nissan Micra, which our students have again found has a simple logical layout and is easy to control with good all round visibility when driving, that is why we feel it is ideal as a learning car.
In addition the car has the following features for our pupil’s safety and comfort;
He-Man duel controls – for safety and to give students added confidence
Power assisted Steering – for comfort and ease of use
Electric Windows
Air Conditioning
Driver and passengers air-bags
Having the right training vehicle is essential to maximising each learners chance of passing their test in as short a time as possible! Which is always our aim at Drive2Pass School of Motoring.

FIND OUT MORE
LONDON DRIVING LESSONS, RUISLIP, HARROW, HILLINGDON, UXBRIDGE, WEMBLEY, PINNER, NORTHWOOD AND NORTHOLT

Drive2Pass School Of Motoring - Barnet

Automatic driving lessons with friendly, patient, experienced and fully qualified male and female driving instructors.

Our current Automatic teaching vehicle is a Nissan Micra, which our students have again found has a simple logical layout and is easy to control with good all round visibility when driving, that is why we feel it is ideal as a learning car.

Automatic Driving Lessons London

1 Hour

5 Hour Block

10 Hours Block

Introductory Special Offer

MJ Electrical Training has the largest centre network in the UK, with City &amp; Guilds exams available every week.Final exams for the 18th Edition Wiring Regulations, Part P Building Regulations, ECS Health &amp; Safety Courses&nbsp;and CSCS Green Labourers Health &amp; Safety in a Construction Environment are available weekly in Dover.<a href="https://mjelectricaltraining.co.uk/exam-venue/safety-passport/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">Learn More @ MJ Electrical Training &gt;&gt;</a>Take the First Step Towards a Successful Career in the Electrical Industry with the SPA Health &amp; Safety Core DayAre you ready to kickstart or advance your career in the electrical industry? Obtaining the ECS Labourer Card is a crucial milestone that demonstrates your competence in assisting electricians in their installations. This card not only opens doors for new opportunities but also ensures that you are recognized as a qualified professional in the field. One of the most efficient ways to qualify for this essential certification is by completing the SPA Health &amp; Safety Core Day, offered by MJ Electrical Training.Why is the ECS Labourer Card Important?The ECS Labourer Card is a must-have for anyone looking to start or further their career in the electrical industry. It signifies that you are competent to assist electricians in their electrical installations under supervision, ensuring safety and efficiency on the job. While advanced qualifications like the JIB Gold Card require extensive training and experience, the ECS Labourer Card provides a valuable entry point for newcomers, trainees, and those aiming to become fully qualified electricians.Pathways to the ECS Labourer CardMJ Electrical Training outlines two primary routes to gaining the ECS Labourer Card, depending on your previous qualifications and experience:1.&nbsp;Route One: If you already hold approved JIB theory qualifications, you may be exempt from additional health and safety courses.2.&nbsp;Route Two: If you do not hold these qualifications, you will need to complete an ECS-approved Health &amp; Safety Course. The SPA Health &amp; Safety Core Day is one of the most accessible and comprehensive options available.SPA Health &amp; Safety Core Day: Your Gateway to ECS Health &amp; Safety ExemptionThe SPA Health &amp; Safety Core Day, offered by MJ Electrical Training for just &pound;174.00 (including VAT), is a one-day online face-to-face training course delivered via Teams or Zoom. Available every week, this course is designed to provide you with the essential health and safety knowledge required for the electrical industry. Completing this course will exempt you from the ECS Health &amp; Safety Assessment, streamlining your path to obtaining the ECS Labourer Card.Who Should Take This Course?The SPA Health &amp; Safety Core Day is ideal for anyone looking to gain an ECS Labourers Card or complete an ECS Health &amp; Safety Exemption:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Practising electricians looking to formalise their safety training.</li><li fr-original-style="" style="box-sizing: border-box;">Trainees and apprentices in the electrical industry.</li><li fr-original-style="" style="box-sizing: border-box;">Associated trade professionals such as electrical engineers, contracts managers, designers, consultants, surveyors, builders, and plumbers.</li></ul>Benefits of the SPA Health &amp; Safety Core Day<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Comprehensive Training: The course covers all necessary aspects of health and safety in the electrical industry, ensuring you are well-prepared for your role.</li><li fr-original-style="" style="box-sizing: border-box;">Flexible Learning: Delivered online, you can complete the training from the comfort of your home or office, making it convenient and accessible.</li><li fr-original-style="" style="box-sizing: border-box;">Certification: Upon completion, you will receive a certificate that can be used to evidence you meet the H&amp;S requirements for the ECS Labourer Card.</li></ul>Further Opportunities with the ECS Labourer CardObtaining the ECS Labourer Card allows you to progress into employment and onto further qualifications, such as:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification (2392-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Certificate in Building Regulations for Electrical Installation Contractors in Dwellings (2393-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Initial Verification (2391-50)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in the Periodic Inspection (2391-51)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Inspection and Testing (2391-52)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 4 Higher Professional Diploma in Building Services Engineering (4467-04)</li></ul>To qualify for the ECS Labourer Card, not only must you have an ECS-approved H&amp;S course, but you must also demonstrate active engagement in the electrotechnical sector. This proof can be provided through:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">An application by your employer via the ECS Employer Portal.</li><li fr-original-style="" style="box-sizing: border-box;">A written reference from your current employer on company-headed paper, stating your role as an electrical labourer, start date, and signed by an authorised person.</li><li fr-original-style="" style="box-sizing: border-box;">Confirmation of your contract duration from an agency if you are working through one.</li><li fr-original-style="" style="box-sizing: border-box;">Documented proof of enrolment in a related electrical course from your educational institution.</li></ul>Additionally, you can submit an offer letter, employment contract, or recent payslip from a reputable business within the industry. These documents validate your eligibility and expertise, completing the ECS Labourer Card application process.Verify and Stay UpdatedWhile every effort is made to provide accurate and up-to-date information, it is essential to verify the current application criteria by visiting the <a href="https://www.ecscard.org.uk/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">ECS Website</a>. Keeping informed ensures that you meet all requirements and avoid any potential issues during the application process.ConclusionTaking the SPA Health &amp; Safety Core Day is a strategic move for anyone looking to advance their career in the electrical industry. Not only does it provide essential health and safety training, but it also qualifies you for the ECS Labourer Card, a vital certification for gaining employment and furthering your career.Enrol in the SPA Health &amp; Safety Core Day with MJ Electrical Training today. Equip yourself with the knowledge and certification needed to excel in the dynamic and rewarding field of electrical installations. Your journey to becoming a fully qualified electrician starts here!&nbsp;

MJ Electrical Training has the largest centre network in the UK, with City & Guilds exams available every week.
Final exams for the 18th Edition Wiring Regulations, Part P Building Regulations, ECS Health & Safety Courses and CSCS Green Labourers Health & Safety in a Construction Environment are available weekly in Dover.
Learn More @ MJ Electrical Training >>
Take the First Step Towards a Successful Career in the Electrical Industry with the SPA Health & Safety Core Day
Are you ready to kickstart or advance your career in the electrical industry? Obtaining the ECS Labourer Card is a crucial milestone that demonstrates your competence in assisting electricians in their installations. This card not only opens doors for new opportunities but also ensures that you are recognized as a qualified professional in the field. One of the most efficient ways to qualify for this essential certification is by completing the SPA Health & Safety Core Day, offered by MJ Electrical Training.
Why is the ECS Labourer Card Important?
The ECS Labourer Card is a must-have for anyone looking to start or further their career in the electrical industry. It signifies that you are competent to assist electricians in their electrical installations under supervision, ensuring safety and efficiency on the job. While advanced qualifications like the JIB Gold Card require extensive training and experience, the ECS Labourer Card provides a valuable entry point for newcomers, trainees, and those aiming to become fully qualified electricians.
Pathways to the ECS Labourer Card
MJ Electrical Training outlines two primary routes to gaining the ECS Labourer Card, depending on your previous qualifications and experience:
1. Route One: If you already hold approved JIB theory qualifications, you may be exempt from additional health and safety courses.
2. Route Two: If you do not hold these qualifications, you will need to complete an ECS-approved Health & Safety Course. The SPA Health & Safety Core Day is one of the most accessible and comprehensive options available.
SPA Health & Safety Core Day: Your Gateway to ECS Health & Safety Exemption
The SPA Health & Safety Core Day, offered by MJ Electrical Training for just £174.00 (including VAT), is a one-day online face-to-face training course delivered via Teams or Zoom. Available every week, this course is designed to provide you with the essential health and safety knowledge required for the electrical industry. Completing this course will exempt you from the ECS Health & Safety Assessment, streamlining your path to obtaining the ECS Labourer Card.
Who Should Take This Course?
The SPA Health & Safety Core Day is ideal for anyone looking to gain an ECS Labourers Card or complete an ECS Health & Safety Exemption:
Practising electricians looking to formalise their safety training.
Trainees and apprentices in the electrical industry.
Associated trade professionals such as electrical engineers, contracts managers, designers, consultants, surveyors, builders, and plumbers.
Benefits of the SPA Health & Safety Core Day
Comprehensive Training: The course covers all necessary aspects of health and safety in the electrical industry, ensuring you are well-prepared for your role.
Flexible Learning: Delivered online, you can complete the training from the comfort of your home or office, making it convenient and accessible.
Certification: Upon completion, you will receive a certificate that can be used to evidence you meet the H&S requirements for the ECS Labourer Card.
Further Opportunities with the ECS Labourer Card
Obtaining the ECS Labourer Card allows you to progress into employment and onto further qualifications, such as:
City & Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification (2392-10)
City & Guilds Level 3 Certificate in Building Regulations for Electrical Installation Contractors in Dwellings (2393-10)
City & Guilds Level 3 Award in Initial Verification (2391-50)
City & Guilds Level 3 Award in the Periodic Inspection (2391-51)
City & Guilds Level 3 Award in Inspection and Testing (2391-52)
City & Guilds Level 4 Higher Professional Diploma in Building Services Engineering (4467-04)
To qualify for the ECS Labourer Card, not only must you have an ECS-approved H&S course, but you must also demonstrate active engagement in the electrotechnical sector. This proof can be provided through:
An application by your employer via the ECS Employer Portal.
A written reference from your current employer on company-headed paper, stating your role as an electrical labourer, start date, and signed by an authorised person.
Confirmation of your contract duration from an agency if you are working through one.
Documented proof of enrolment in a related electrical course from your educational institution.
Additionally, you can submit an offer letter, employment contract, or recent payslip from a reputable business within the industry. These documents validate your eligibility and expertise, completing the ECS Labourer Card application process.
Verify and Stay Updated
While every effort is made to provide accurate and up-to-date information, it is essential to verify the current application criteria by visiting the ECS Website. Keeping informed ensures that you meet all requirements and avoid any potential issues during the application process.
Conclusion
Taking the SPA Health & Safety Core Day is a strategic move for anyone looking to advance their career in the electrical industry. Not only does it provide essential health and safety training, but it also qualifies you for the ECS Labourer Card, a vital certification for gaining employment and furthering your career.
Enrol in the SPA Health & Safety Core Day with MJ Electrical Training today. Equip yourself with the knowledge and certification needed to excel in the dynamic and rewarding field of electrical installations. Your journey to becoming a fully qualified electrician starts here!
 

MJ Electrical Training 

Construction Industry Scheme (CIS)

City & Guilds

Health & Safety

Electrical Testing

Wiring Regulations

Electrical Installation

Electrical Inspection & Testing

ECS Health & Safety Course with MJ Electrical Training. Available every week, use this course to complete the application process when applying for an ECS Labourers Card. 

ECS Card Health & Safety Course Liverpool

MJ Electrical Training has the largest centre network in the UK, with City &amp; Guilds exams available every week.Final exams for the 18th Edition Wiring Regulations, Part P Building Regulations, ECS Health &amp; Safety Courses&nbsp;and CSCS Green Labourers Health &amp; Safety in a Construction Environment are available weekly.<a href="https://mjelectricaltraining.co.uk/exam-venue/safety-passport/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">Learn More @ MJ Electrical Training &gt;&gt;</a>Take the First Step Towards a Successful Career in the Electrical Industry with the SPA Health &amp; Safety Core DayAre you ready to kickstart or advance your career in the electrical industry? Obtaining the ECS Labourer Card is a crucial milestone that demonstrates your competence in assisting electricians in their installations. This card not only opens doors for new opportunities but also ensures that you are recognized as a qualified professional in the field. One of the most efficient ways to qualify for this essential certification is by completing the SPA Health &amp; Safety Core Day, offered by MJ Electrical Training.Why is the ECS Labourer Card Important?The ECS Labourer Card is a must-have for anyone looking to start or further their career in the electrical industry. It signifies that you are competent to assist electricians in their electrical installations under supervision, ensuring safety and efficiency on the job. While advanced qualifications like the JIB Gold Card require extensive training and experience, the ECS Labourer Card provides a valuable entry point for newcomers, trainees, and those aiming to become fully qualified electricians.Pathways to the ECS Labourer CardMJ Electrical Training outlines two primary routes to gaining the ECS Labourer Card, depending on your previous qualifications and experience:1.&nbsp;Route One: If you already hold approved JIB theory qualifications, you may be exempt from additional health and safety courses.2.&nbsp;Route Two: If you do not hold these qualifications, you will need to complete an ECS-approved Health &amp; Safety Course. The SPA Health &amp; Safety Core Day is one of the most accessible and comprehensive options available.SPA Health &amp; Safety Core Day: Your Gateway to ECS Health &amp; Safety ExemptionThe SPA Health &amp; Safety Core Day, offered by MJ Electrical Training for just &pound;174.00 (including VAT), is a one-day online face-to-face training course delivered via Teams or Zoom. Available every week, this course is designed to provide you with the essential health and safety knowledge required for the electrical industry. Completing this course will exempt you from the ECS Health &amp; Safety Assessment, streamlining your path to obtaining the ECS Labourer Card.Who Should Take This Course?The SPA Health &amp; Safety Core Day is ideal for anyone looking to gain an ECS Labourers Card or complete an ECS Health &amp; Safety Exemption:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Practising electricians looking to formalise their safety training.</li><li fr-original-style="" style="box-sizing: border-box;">Trainees and apprentices in the electrical industry.</li><li fr-original-style="" style="box-sizing: border-box;">Associated trade professionals such as electrical engineers, contracts managers, designers, consultants, surveyors, builders, and plumbers.</li></ul>Benefits of the SPA Health &amp; Safety Core Day<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Comprehensive Training: The course covers all necessary aspects of health and safety in the electrical industry, ensuring you are well-prepared for your role.</li><li fr-original-style="" style="box-sizing: border-box;">Flexible Learning: Delivered online, you can complete the training from the comfort of your home or office, making it convenient and accessible.</li><li fr-original-style="" style="box-sizing: border-box;">Certification: Upon completion, you will receive a certificate that can be used to evidence you meet the H&amp;S requirements for the ECS Labourer Card.</li></ul>Further Opportunities with the ECS Labourer CardObtaining the ECS Labourer Card allows you to progress into employment and onto further qualifications, such as:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification (2392-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Certificate in Building Regulations for Electrical Installation Contractors in Dwellings (2393-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Initial Verification (2391-50)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in the Periodic Inspection (2391-51)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Inspection and Testing (2391-52)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 4 Higher Professional Diploma in Building Services Engineering (4467-04)</li></ul>To qualify for the ECS Labourer Card, not only must you have an ECS-approved H&amp;S course, but you must also demonstrate active engagement in the electrotechnical sector. This proof can be provided through:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">An application by your employer via the ECS Employer Portal.</li><li fr-original-style="" style="box-sizing: border-box;">A written reference from your current employer on company-headed paper, stating your role as an electrical labourer, start date, and signed by an authorised person.</li><li fr-original-style="" style="box-sizing: border-box;">Confirmation of your contract duration from an agency if you are working through one.</li><li fr-original-style="" style="box-sizing: border-box;">Documented proof of enrolment in a related electrical course from your educational institution.</li></ul>Additionally, you can submit an offer letter, employment contract, or recent payslip from a reputable business within the industry. These documents validate your eligibility and expertise, completing the ECS Labourer Card application process.Verify and Stay UpdatedWhile every effort is made to provide accurate and up-to-date information, it is essential to verify the current application criteria by visiting the <a href="https://www.ecscard.org.uk/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">ECS Website</a>. Keeping informed ensures that you meet all requirements and avoid any potential issues during the application process.ConclusionTaking the SPA Health &amp; Safety Core Day is a strategic move for anyone looking to advance their career in the electrical industry. Not only does it provide essential health and safety training, but it also qualifies you for the ECS Labourer Card, a vital certification for gaining employment and furthering your career.Enrol in the SPA Health &amp; Safety Core Day with MJ Electrical Training today. Equip yourself with the knowledge and certification needed to excel in the dynamic and rewarding field of electrical installations. Your journey to becoming a fully qualified electrician starts here!&nbsp;

MJ Electrical Training has the largest centre network in the UK, with City & Guilds exams available every week.
Final exams for the 18th Edition Wiring Regulations, Part P Building Regulations, ECS Health & Safety Courses and CSCS Green Labourers Health & Safety in a Construction Environment are available weekly.
Learn More @ MJ Electrical Training >>
Take the First Step Towards a Successful Career in the Electrical Industry with the SPA Health & Safety Core Day
Are you ready to kickstart or advance your career in the electrical industry? Obtaining the ECS Labourer Card is a crucial milestone that demonstrates your competence in assisting electricians in their installations. This card not only opens doors for new opportunities but also ensures that you are recognized as a qualified professional in the field. One of the most efficient ways to qualify for this essential certification is by completing the SPA Health & Safety Core Day, offered by MJ Electrical Training.
Why is the ECS Labourer Card Important?
The ECS Labourer Card is a must-have for anyone looking to start or further their career in the electrical industry. It signifies that you are competent to assist electricians in their electrical installations under supervision, ensuring safety and efficiency on the job. While advanced qualifications like the JIB Gold Card require extensive training and experience, the ECS Labourer Card provides a valuable entry point for newcomers, trainees, and those aiming to become fully qualified electricians.
Pathways to the ECS Labourer Card
MJ Electrical Training outlines two primary routes to gaining the ECS Labourer Card, depending on your previous qualifications and experience:
1. Route One: If you already hold approved JIB theory qualifications, you may be exempt from additional health and safety courses.
2. Route Two: If you do not hold these qualifications, you will need to complete an ECS-approved Health & Safety Course. The SPA Health & Safety Core Day is one of the most accessible and comprehensive options available.
SPA Health & Safety Core Day: Your Gateway to ECS Health & Safety Exemption
The SPA Health & Safety Core Day, offered by MJ Electrical Training for just £174.00 (including VAT), is a one-day online face-to-face training course delivered via Teams or Zoom. Available every week, this course is designed to provide you with the essential health and safety knowledge required for the electrical industry. Completing this course will exempt you from the ECS Health & Safety Assessment, streamlining your path to obtaining the ECS Labourer Card.
Who Should Take This Course?
The SPA Health & Safety Core Day is ideal for anyone looking to gain an ECS Labourers Card or complete an ECS Health & Safety Exemption:
Practising electricians looking to formalise their safety training.
Trainees and apprentices in the electrical industry.
Associated trade professionals such as electrical engineers, contracts managers, designers, consultants, surveyors, builders, and plumbers.
Benefits of the SPA Health & Safety Core Day
Comprehensive Training: The course covers all necessary aspects of health and safety in the electrical industry, ensuring you are well-prepared for your role.
Flexible Learning: Delivered online, you can complete the training from the comfort of your home or office, making it convenient and accessible.
Certification: Upon completion, you will receive a certificate that can be used to evidence you meet the H&S requirements for the ECS Labourer Card.
Further Opportunities with the ECS Labourer Card
Obtaining the ECS Labourer Card allows you to progress into employment and onto further qualifications, such as:
City & Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification (2392-10)
City & Guilds Level 3 Certificate in Building Regulations for Electrical Installation Contractors in Dwellings (2393-10)
City & Guilds Level 3 Award in Initial Verification (2391-50)
City & Guilds Level 3 Award in the Periodic Inspection (2391-51)
City & Guilds Level 3 Award in Inspection and Testing (2391-52)
City & Guilds Level 4 Higher Professional Diploma in Building Services Engineering (4467-04)
To qualify for the ECS Labourer Card, not only must you have an ECS-approved H&S course, but you must also demonstrate active engagement in the electrotechnical sector. This proof can be provided through:
An application by your employer via the ECS Employer Portal.
A written reference from your current employer on company-headed paper, stating your role as an electrical labourer, start date, and signed by an authorised person.
Confirmation of your contract duration from an agency if you are working through one.
Documented proof of enrolment in a related electrical course from your educational institution.
Additionally, you can submit an offer letter, employment contract, or recent payslip from a reputable business within the industry. These documents validate your eligibility and expertise, completing the ECS Labourer Card application process.
Verify and Stay Updated
While every effort is made to provide accurate and up-to-date information, it is essential to verify the current application criteria by visiting the ECS Website. Keeping informed ensures that you meet all requirements and avoid any potential issues during the application process.
Conclusion
Taking the SPA Health & Safety Core Day is a strategic move for anyone looking to advance their career in the electrical industry. Not only does it provide essential health and safety training, but it also qualifies you for the ECS Labourer Card, a vital certification for gaining employment and furthering your career.
Enrol in the SPA Health & Safety Core Day with MJ Electrical Training today. Equip yourself with the knowledge and certification needed to excel in the dynamic and rewarding field of electrical installations. Your journey to becoming a fully qualified electrician starts here!
 

ECS Card Health & Safety Course Bromley

ECS Card Health & Safety Course Dover

Bromley

MJ Electrical Training has the largest centre network in the UK, with City &amp; Guilds exams available every week.Final exams for the 18th Edition Wiring Regulations, Part P Building Regulations, ECS Health &amp; Safety Courses&nbsp;and CSCS Green Labourers Health &amp; Safety in a Construction Environment are available weekly in Kent.<a href="https://mjelectricaltraining.co.uk/exam-venue/safety-passport/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">Learn More @ MJ Electrical Training &gt;&gt;</a>Take the First Step Towards a Successful Career in the Electrical Industry with the SPA Health &amp; Safety Core DayAre you ready to kickstart or advance your career in the electrical industry? Obtaining the ECS Labourer Card is a crucial milestone that demonstrates your competence in assisting electricians in their installations. This card not only opens doors for new opportunities but also ensures that you are recognized as a qualified professional in the field. One of the most efficient ways to qualify for this essential certification is by completing the SPA Health &amp; Safety Core Day, offered by MJ Electrical Training.Why is the ECS Labourer Card Important?The ECS Labourer Card is a must-have for anyone looking to start or further their career in the electrical industry. It signifies that you are competent to assist electricians in their electrical installations under supervision, ensuring safety and efficiency on the job. While advanced qualifications like the JIB Gold Card require extensive training and experience, the ECS Labourer Card provides a valuable entry point for newcomers, trainees, and those aiming to become fully qualified electricians.Pathways to the ECS Labourer CardMJ Electrical Training outlines two primary routes to gaining the ECS Labourer Card, depending on your previous qualifications and experience:1.&nbsp;Route One: If you already hold approved JIB theory qualifications, you may be exempt from additional health and safety courses.2.&nbsp;Route Two: If you do not hold these qualifications, you will need to complete an ECS-approved Health &amp; Safety Course. The SPA Health &amp; Safety Core Day is one of the most accessible and comprehensive options available.SPA Health &amp; Safety Core Day: Your Gateway to ECS Health &amp; Safety ExemptionThe SPA Health &amp; Safety Core Day, offered by MJ Electrical Training for just &pound;174.00 (including VAT), is a one-day online face-to-face training course delivered via Teams or Zoom. Available every week, this course is designed to provide you with the essential health and safety knowledge required for the electrical industry. Completing this course will exempt you from the ECS Health &amp; Safety Assessment, streamlining your path to obtaining the ECS Labourer Card.Who Should Take This Course?The SPA Health &amp; Safety Core Day is ideal for anyone looking to gain an ECS Labourers Card or complete an ECS Health &amp; Safety Exemption:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Practising electricians looking to formalise their safety training.</li><li fr-original-style="" style="box-sizing: border-box;">Trainees and apprentices in the electrical industry.</li><li fr-original-style="" style="box-sizing: border-box;">Associated trade professionals such as electrical engineers, contracts managers, designers, consultants, surveyors, builders, and plumbers.</li></ul>Benefits of the SPA Health &amp; Safety Core Day<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Comprehensive Training: The course covers all necessary aspects of health and safety in the electrical industry, ensuring you are well-prepared for your role.</li><li fr-original-style="" style="box-sizing: border-box;">Flexible Learning: Delivered online, you can complete the training from the comfort of your home or office, making it convenient and accessible.</li><li fr-original-style="" style="box-sizing: border-box;">Certification: Upon completion, you will receive a certificate that can be used to evidence you meet the H&amp;S requirements for the ECS Labourer Card.</li></ul>Further Opportunities with the ECS Labourer CardObtaining the ECS Labourer Card allows you to progress into employment and onto further qualifications, such as:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification (2392-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Certificate in Building Regulations for Electrical Installation Contractors in Dwellings (2393-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Initial Verification (2391-50)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in the Periodic Inspection (2391-51)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Inspection and Testing (2391-52)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 4 Higher Professional Diploma in Building Services Engineering (4467-04)</li></ul>To qualify for the ECS Labourer Card, not only must you have an ECS-approved H&amp;S course, but you must also demonstrate active engagement in the electrotechnical sector. This proof can be provided through:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">An application by your employer via the ECS Employer Portal.</li><li fr-original-style="" style="box-sizing: border-box;">A written reference from your current employer on company-headed paper, stating your role as an electrical labourer, start date, and signed by an authorised person.</li><li fr-original-style="" style="box-sizing: border-box;">Confirmation of your contract duration from an agency if you are working through one.</li><li fr-original-style="" style="box-sizing: border-box;">Documented proof of enrolment in a related electrical course from your educational institution.</li></ul>Additionally, you can submit an offer letter, employment contract, or recent payslip from a reputable business within the industry. These documents validate your eligibility and expertise, completing the ECS Labourer Card application process.Verify and Stay UpdatedWhile every effort is made to provide accurate and up-to-date information, it is essential to verify the current application criteria by visiting the <a href="https://www.ecscard.org.uk/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">ECS Website</a>. Keeping informed ensures that you meet all requirements and avoid any potential issues during the application process.ConclusionTaking the SPA Health &amp; Safety Core Day is a strategic move for anyone looking to advance their career in the electrical industry. Not only does it provide essential health and safety training, but it also qualifies you for the ECS Labourer Card, a vital certification for gaining employment and furthering your career.Enrol in the SPA Health &amp; Safety Core Day with MJ Electrical Training today. Equip yourself with the knowledge and certification needed to excel in the dynamic and rewarding field of electrical installations. Your journey to becoming a fully qualified electrician starts here!&nbsp;

MJ Electrical Training has the largest centre network in the UK, with City & Guilds exams available every week.
Final exams for the 18th Edition Wiring Regulations, Part P Building Regulations, ECS Health & Safety Courses and CSCS Green Labourers Health & Safety in a Construction Environment are available weekly in Kent.
Learn More @ MJ Electrical Training >>
Take the First Step Towards a Successful Career in the Electrical Industry with the SPA Health & Safety Core Day
Are you ready to kickstart or advance your career in the electrical industry? Obtaining the ECS Labourer Card is a crucial milestone that demonstrates your competence in assisting electricians in their installations. This card not only opens doors for new opportunities but also ensures that you are recognized as a qualified professional in the field. One of the most efficient ways to qualify for this essential certification is by completing the SPA Health & Safety Core Day, offered by MJ Electrical Training.
Why is the ECS Labourer Card Important?
The ECS Labourer Card is a must-have for anyone looking to start or further their career in the electrical industry. It signifies that you are competent to assist electricians in their electrical installations under supervision, ensuring safety and efficiency on the job. While advanced qualifications like the JIB Gold Card require extensive training and experience, the ECS Labourer Card provides a valuable entry point for newcomers, trainees, and those aiming to become fully qualified electricians.
Pathways to the ECS Labourer Card
MJ Electrical Training outlines two primary routes to gaining the ECS Labourer Card, depending on your previous qualifications and experience:
1. Route One: If you already hold approved JIB theory qualifications, you may be exempt from additional health and safety courses.
2. Route Two: If you do not hold these qualifications, you will need to complete an ECS-approved Health & Safety Course. The SPA Health & Safety Core Day is one of the most accessible and comprehensive options available.
SPA Health & Safety Core Day: Your Gateway to ECS Health & Safety Exemption
The SPA Health & Safety Core Day, offered by MJ Electrical Training for just £174.00 (including VAT), is a one-day online face-to-face training course delivered via Teams or Zoom. Available every week, this course is designed to provide you with the essential health and safety knowledge required for the electrical industry. Completing this course will exempt you from the ECS Health & Safety Assessment, streamlining your path to obtaining the ECS Labourer Card.
Who Should Take This Course?
The SPA Health & Safety Core Day is ideal for anyone looking to gain an ECS Labourers Card or complete an ECS Health & Safety Exemption:
Practising electricians looking to formalise their safety training.
Trainees and apprentices in the electrical industry.
Associated trade professionals such as electrical engineers, contracts managers, designers, consultants, surveyors, builders, and plumbers.
Benefits of the SPA Health & Safety Core Day
Comprehensive Training: The course covers all necessary aspects of health and safety in the electrical industry, ensuring you are well-prepared for your role.
Flexible Learning: Delivered online, you can complete the training from the comfort of your home or office, making it convenient and accessible.
Certification: Upon completion, you will receive a certificate that can be used to evidence you meet the H&S requirements for the ECS Labourer Card.
Further Opportunities with the ECS Labourer Card
Obtaining the ECS Labourer Card allows you to progress into employment and onto further qualifications, such as:
City & Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification (2392-10)
City & Guilds Level 3 Certificate in Building Regulations for Electrical Installation Contractors in Dwellings (2393-10)
City & Guilds Level 3 Award in Initial Verification (2391-50)
City & Guilds Level 3 Award in the Periodic Inspection (2391-51)
City & Guilds Level 3 Award in Inspection and Testing (2391-52)
City & Guilds Level 4 Higher Professional Diploma in Building Services Engineering (4467-04)
To qualify for the ECS Labourer Card, not only must you have an ECS-approved H&S course, but you must also demonstrate active engagement in the electrotechnical sector. This proof can be provided through:
An application by your employer via the ECS Employer Portal.
A written reference from your current employer on company-headed paper, stating your role as an electrical labourer, start date, and signed by an authorised person.
Confirmation of your contract duration from an agency if you are working through one.
Documented proof of enrolment in a related electrical course from your educational institution.
Additionally, you can submit an offer letter, employment contract, or recent payslip from a reputable business within the industry. These documents validate your eligibility and expertise, completing the ECS Labourer Card application process.
Verify and Stay Updated
While every effort is made to provide accurate and up-to-date information, it is essential to verify the current application criteria by visiting the ECS Website. Keeping informed ensures that you meet all requirements and avoid any potential issues during the application process.
Conclusion
Taking the SPA Health & Safety Core Day is a strategic move for anyone looking to advance their career in the electrical industry. Not only does it provide essential health and safety training, but it also qualifies you for the ECS Labourer Card, a vital certification for gaining employment and furthering your career.
Enrol in the SPA Health & Safety Core Day with MJ Electrical Training today. Equip yourself with the knowledge and certification needed to excel in the dynamic and rewarding field of electrical installations. Your journey to becoming a fully qualified electrician starts here!
 

ECS Card Health & Safety Course Kent

ECS Card Health & Safety Course Newcastle

This comprehensive 7-hour online course is designed for professional drivers who need to complete Driver CPC Periodic Training to maintain their Driver CPC Licence. 
Participants will explore crucial topics such as managing fatigue, understanding the impact of diet and lifestyle on driving performance, and adopting economical driving practices.
Who Should Attend:
This course is ideal for all professional drivers required to undertake Driver CPC Periodic Training to ensure compliance with current legislation and to enhance their driving skills.

Topics Covered:
	•	Tiredness and Fatigue Management: Techniques for managing driver fatigue, understanding rest requirements, and learning strategies to stay alert on long drives.
	•	Diet and Lifestyle: Insights into nutrition and lifestyle habits that promote sustained energy, mental focus, and overall health.
	•	Economical Driving: Practical tips and techniques for fuel-efficient driving that benefit both the driver and the environment, reducing overall operational costs.

Course Format: Online 
Join us for this training session to enhance your skills, maintain compliance, and stay up-to-date with industry standards.


Total Compliance 

Driver CPC - 1 Day Periodic 7 Hour Course/ Tiredness, Diet & Lifestyle / Economical Driving

<h2 id="isPasted" fr-original-style="" style="box-sizing: border-box;"> </h2>This advanced financial modelling course will benefit Real Estate Professionals looking to develop their financial modelling skills to the next level. This course is intended to the most ambitious modellers in the property industry who would like to be fully proficient in building complex real estate models. On this course you will...<ul fr-original-style="" style="box-sizing: border-box;"><li value="1" fr-original-style="" style="box-sizing: border-box;">Understand how the application and use of Structured Finance products in Real Estate</li><li value="2" fr-original-style="" style="box-sizing: border-box;">Learn how to introduce several tranches of debt in a development project</li><li value="3" fr-original-style="" style="box-sizing: border-box;">Understand how to model different parties to a project</li><li value="4" fr-original-style="" style="box-sizing: border-box;">Create Joint Venture structures between Developers, Lenders and Equity Partners</li><li value="5" fr-original-style="" style="box-sizing: border-box;">Learn advanced modelling techniques to analyse underlying asset risk</li><li value="6" fr-original-style="" style="box-sizing: border-box;">Understand how underlying asset risk impacts return to all parties to a project</li></ul> Who will benefit from this course?<ul fr-original-style="" style="box-sizing: border-box;"><li value="1" fr-original-style="" style="box-sizing: border-box;">Real Estate professionals from a mid to senior level with exposure to Real Estate financial models</li><li value="2" fr-original-style="" style="box-sizing: border-box;">Mid-level to senior Real Estate Analysts who would like to advance their financial modelling skills in areas such as development, portfolio analysis, and risk analysis</li><li value="3" fr-original-style="" style="box-sizing: border-box;">Real Estate Investors who would like to expand their knowledge and understanding of Real Estate cash flow models to an advanced level</li></ul> Course Outline:<ul fr-original-style="" style="box-sizing: border-box;"><li value="1" fr-original-style="" style="box-sizing: border-box;">Mezzanine debt modelling</li><li value="2" fr-original-style="" style="box-sizing: border-box;">Joint Venture structures between developers and lender/equity partners</li><li value="3" fr-original-style="" style="box-sizing: border-box;">Promote and profit share structure calculations</li><li value="4" fr-original-style="" style="box-sizing: border-box;">Advanced project cash flows with mezzanine debts</li><li value="5" fr-original-style="" style="box-sizing: border-box;">Key Real Estate and investment risks, risk adjustment of exit yields</li><li value="6" fr-original-style="" style="box-sizing: border-box;">Sensitivity and Scenario Analysis</li><li value="7" fr-original-style="" style="box-sizing: border-box;">Monte Carlo Analysis</li></ul> Included in the Course<ul fr-original-style="" style="box-sizing: border-box;"><li value="1" fr-original-style="" style="box-sizing: border-box;">CPD Accredited Certificate &amp; LinkedIn Proficiency Badge</li><li value="2" id="isPasted" fr-original-style="" style="box-sizing: border-box;">Course Manual - In-Person Course attendees will receive a Physical Copy, Virtual Course attendees will receive a Virtual Copy and have the option to purchase a Hard Copy at an additional fee</li><li value="3" fr-original-style="" style="box-sizing: border-box;">Course Files</li><li value="4" fr-original-style="" style="box-sizing: border-box;">Online Learning Platform access - Further Learning Resources (Reading, Files and Videos)</li><li value="5" fr-original-style="" style="box-sizing: border-box;">Post Course Support - Two Months of Questions &amp; Answers, and One year of support is available for an additional fee</li></ul> For more information about the Real Estate Modelling Masterclass such as course delivery methods, pricing and dates, please contact Sam on the Bayfield Training Sales team:E - s.musgrave@bayfieldtraining.comT - 01223 517851W - <a href="https://www.bayfieldtraining.com/" target="_blank" rel="nofollow noopener noreferrer ugc" title="https://www.bayfieldtraining.com/" data-airgap-id="125" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">www.bayfieldtraining.com</a>



This advanced financial modelling course will benefit Real Estate Professionals looking to develop their financial modelling skills to the next level. This course is intended to the most ambitious modellers in the property industry who would like to be fully proficient in building complex real estate models.


On this course you will...
Understand how the application and use of Structured Finance products in Real Estate
Learn how to introduce several tranches of debt in a development project
Understand how to model different parties to a project
Create Joint Venture structures between Developers, Lenders and Equity Partners
Learn advanced modelling techniques to analyse underlying asset risk
Understand how underlying asset risk impacts return to all parties to a project


Who will benefit from this course?
Real Estate professionals from a mid to senior level with exposure to Real Estate financial models
Mid-level to senior Real Estate Analysts who would like to advance their financial modelling skills in areas such as development, portfolio analysis, and risk analysis
Real Estate Investors who would like to expand their knowledge and understanding of Real Estate cash flow models to an advanced level


Course Outline:
Mezzanine debt modelling
Joint Venture structures between developers and lender/equity partners
Promote and profit share structure calculations
Advanced project cash flows with mezzanine debts
Key Real Estate and investment risks, risk adjustment of exit yields
Sensitivity and Scenario Analysis
Monte Carlo Analysis


Included in the Course
CPD Accredited Certificate & LinkedIn Proficiency Badge
Course Manual - In-Person Course attendees will receive a Physical Copy, Virtual Course attendees will receive a Virtual Copy and have the option to purchase a Hard Copy at an additional fee
Course Files
Online Learning Platform access - Further Learning Resources (Reading, Files and Videos)
Post Course Support - Two Months of Questions & Answers, and One year of support is available for an additional fee


For more information about the Real Estate Modelling Masterclass such as course delivery methods, pricing and dates, please contact Sam on the Bayfield Training Sales team:
E - s.musgrave@bayfieldtraining.com
T - 01223 517851
W - www.bayfieldtraining.com

Bayfield Training

Financial Modelling & Analysis

Real Estate Finance

Financial Modelling

Professional Development

Investment Management

Continuous Professional Development (CPD)

This course is intended to the most ambitious modellers in the property industry who would like to be fully proficient in building complex real estate models.

Real Estate Modelling Masterclass (Advanced Cash Flow Modelling)

This accredited seminar provides an introduction for employers, HR managers and supervisors to learn how domestic abuse can impact in the workplace.<div style="color: rgb(119, 119, 119); box-sizing: border-box;" fr-original-style=" color: rgb(119, 119, 119);">Did you know&hellip;. Domestic Abuse costs UK businesses &pound;14 billion per year. (Home Office &ndash; July 2021)This training seminar provides an opportunity for employers, HR managers, supervisors, and team leaders to learn how domestic abuse can impact in the business as well as the next steps to support your staff and protect your business.By attending this event you will gain an&bull; Increased understanding of domestic abuse&bull; Increased understanding of the legal and safety implications for employers&bull; Next steps on how your workplace can become accredited as a &lsquo;Safe Space to Work&rsquo;This on-line training workshop will introduce the social, health and legal context, employers&rsquo; responsibilities and awareness of the economic impact of domestic abuse. By the end of the session attendees will feel confident in taking the next steps to ensure their workplace is a Safe Space.This training workshop will provide the first step towards understanding a many layered and complex subject.CPD credits are awarded with this workshop.Attendees will receive handouts and a certificate (if required).This event is hosted by Julie Johns MBE. The workshop will be delivered as a 1 hour live Zoom event and is being offered at &pound;30 per person. </div>

This accredited seminar provides an introduction for employers, HR managers and supervisors to learn how domestic abuse can impact in the workplace.
Did you know…. Domestic Abuse costs UK businesses £14 billion per year. (Home Office – July 2021)
This training seminar provides an opportunity for employers, HR managers, supervisors, and team leaders to learn how domestic abuse can impact in the business as well as the next steps to support your staff and protect your business.
By attending this event you will gain an
• Increased understanding of domestic abuse
• Increased understanding of the legal and safety implications for employers
• Next steps on how your workplace can become accredited as a ‘Safe Space to Work’
This on-line training workshop will introduce the social, health and legal context, employers’ responsibilities and awareness of the economic impact of domestic abuse. By the end of the session attendees will feel confident in taking the next steps to ensure their workplace is a Safe Space.
This training workshop will provide the first step towards understanding a many layered and complex subject.
CPD credits are awarded with this workshop.
Attendees will receive handouts and a certificate (if required).
This event is hosted by Julie Johns MBE. 
The workshop will be delivered as a 1 hour live Zoom event and is being offered at £30 per person. 

Safe Space Consultancy

Safeguarding

Domestic Abuse

Workplace Health & Safety

Mental Health At Work

Health & Safety At Work

Domestic Violence

This 1 hour on-line training seminar provides an opportunity for employers, HR managers, supervisors, and team leaders to learn how domestic abuse can impact on an employee and the business as well as the next steps to support your staff and protect your business.

An Introduction to Workplace Domestic Abuse Training (CPD Accredited)

Early Bird

Sixty minute webinar on rally regularity timing for jogularity and regularity in styles where a full average speed time schedule is provided. The competitive component of on the public highway historic road rallying, focusing on jogularity style timing. Ideal for competitors on events such as HERO Challenge, Rally the Globe events or Three Castles.

Join our exclusive 60-minute webinar on rally regularity timing, designed to give an introduction to regularities in the jogularity or cumulative speed table styles. Learn how to navigate a full average speed time schedule and master the competitive aspects of historic road rallying on public highways. This session focuses on the processes required to understand and use the supplied time schedules, perfect for those competing in events like the HERO Challenge, Rally the Globe, and Three Castles. Whether you're a seasoned competitor or looking to sharpen your skills, this webinar will equip you with the strategies you need to succeed.


Rally Navigation Training Services

Sports & Fitness

Historic Road Rallying training webinar on Regularity focusing on the Jogularity and Cumulative Speed Table styles.

Rally Navigation - Introduction to Regularity Timing

Bristol

<p id="isPasted" style="box-sizing: border-box; font-size: 16px; color: var(--text); font-family: sans-serif; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-align: left; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; background-color: rgb(255, 255, 255); text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;" fr-original-style="box-sizing: border-box; font-size: 16px; color: var(--text); font-family: sans-serif; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-align: left; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; background-color: rgb(255, 255, 255); text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;">LOOKING FOR: PICTURE BOOKS, MG, YA, ADULT FICTIONMolly Jamieson has been working at <a href="http://www.unitedagents.co.uk" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">United Agents Ltd</a> since 2017, working across adult and children&rsquo;s books, and before that she worked at Curtis Brown. She has recently started building her own client list which already includes million-copy selling authors and bestsellers.Molly has a particular interest in scifi and fantasy across both adult and children&rsquo;s books. For a sense of her taste, she has recently read and enjoyed Sistersong by Lucy Holland, Gideon the Ninth by Tamsyn Muir, Uprooted by Naomi Novik, The Poppy War by R.F. Kuang, and Once Upon A Broken Heart by Stephanie Garber. She loves anything with high stakes, characters you would follow anywhere, big stories, expansive worldbuilding, breathless romance, and threads of adventure running throughout.She is also looking for commercial romantic fiction in all shapes and forms. She has a real soft spot for classic tropes, a great sense of humour, and anything with a clear pitch that makes you sit up and take notice, but in the end it all comes down to chemistry. In this area, she has recently read and loved The Hating Game by Sally Thorne, Book Lovers by Emily Henry, The Unhoneymooners by Christina Lauren, and The Love Hypothesis by Ali Hazelwood.She also represents children&rsquo;s authors and illustrators in all genres, from picture books up to YA.In one single word document, Molly would like you to submit a covering letter, 1 page synopsis and the first three chapters or 5,000 words of your manuscript in a single word document, whichever is shorter. For picture books, please submit a covering letter and 2 picture books in a single document.<p id="isPasted" style="box-sizing: border-box; font-size: 16px; color: var(--text); font-family: sans-serif; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-align: left; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; background-color: rgb(255, 255, 255); text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;" fr-original-style="box-sizing: border-box; font-size: 16px; color: var(--text); font-family: sans-serif; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-align: left; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; background-color: rgb(255, 255, 255); text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;">(In addition to the paid sessions, Molly is kindly offering one free session for low income/under-represented writers. Please email <a href="mailto:agent121@iaminprint.co.uk" style="box-sizing: border-box; text-decoration: inherit; cursor: pointer; user-select: auto; font-size: var(--font-size);" fr-original-style="box-sizing: border-box; text-decoration: inherit; cursor: pointer; user-select: auto;">agent121@iaminprint.co.uk</a> to apply, outlining your case for this option which is offered at the&nbsp;discretion of&nbsp;I Am In Print).&nbsp;By booking you understand you need to conduct an internet connection test with&nbsp;I Am In Print prior to the event. You also agree to email your material in one document to reach I Am In Print by the stated submission deadline and note that I Am In Print take no responsibility for the advice received during your agent meeting.<p style="box-sizing: border-box; font-size: 16px; color: var(--text); font-family: sans-serif; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-align: left; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; background-color: rgb(255, 255, 255); text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;" fr-original-style="box-sizing: border-box; font-size: 16px; color: var(--text); font-family: sans-serif; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-align: left; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; background-color: rgb(255, 255, 255); text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;">The submission deadline is: Monday 15 July 2024.

LOOKING FOR: PICTURE BOOKS, MG, YA, ADULT FICTION
Molly Jamieson has been working at United Agents Ltd since 2017, working across adult and children’s books, and before that she worked at Curtis Brown. She has recently started building her own client list which already includes million-copy selling authors and bestsellers.
Molly has a particular interest in scifi and fantasy across both adult and children’s books. For a sense of her taste, she has recently read and enjoyed Sistersong by Lucy Holland, Gideon the Ninth by Tamsyn Muir, Uprooted by Naomi Novik, The Poppy War by R.F. Kuang, and Once Upon A Broken Heart by Stephanie Garber. She loves anything with high stakes, characters you would follow anywhere, big stories, expansive worldbuilding, breathless romance, and threads of adventure running throughout.
She is also looking for commercial romantic fiction in all shapes and forms. She has a real soft spot for classic tropes, a great sense of humour, and anything with a clear pitch that makes you sit up and take notice, but in the end it all comes down to chemistry. In this area, she has recently read and loved The Hating Game by Sally Thorne, Book Lovers by Emily Henry, The Unhoneymooners by Christina Lauren, and The Love Hypothesis by Ali Hazelwood.
She also represents children’s authors and illustrators in all genres, from picture books up to YA.
In one single word document, Molly would like you to submit a covering letter, 1 page synopsis and the first three chapters or 5,000 words of your manuscript in a single word document, whichever is shorter. For picture books, please submit a covering letter and 2 picture books in a single document.
Please send EITHER picture books OR another genre, not both in one submission.
(In addition to the paid sessions, Molly is kindly offering one free session for low income/under-represented writers. Please email agent121@iaminprint.co.uk to apply, outlining your case for this option which is offered at the discretion of I Am In Print). 
By booking you understand you need to conduct an internet connection test with I Am In Print prior to the event. You also agree to email your material in one document to reach I Am In Print by the stated submission deadline and note that I Am In Print take no responsibility for the advice received during your agent meeting.
The submission deadline is: Monday 18 November 2024.

1458 Courses in Belfast

NPORS Excavator as a Crane (N100)

By Dynamic Training and Assessments Ltd

NPORS Plant Mover - Non Operational Duties (N132)

By Dynamic Training and Assessments Ltd

Influencing Skills

By Mpi Learning - Professional Learning And Development Provider

NPORS Material Re - Handler (N722)

By Dynamic Training and Assessments Ltd

NPORS Slinger / Signaller (N402)

By Dynamic Training and Assessments Ltd

NPORS Excavator 360 (N202)

By Dynamic Training and Assessments Ltd

Compelling Storytelling

By 4and20Million.

Run Your Life - Running Foundations Workshop

By Platinum Training Institute

NPORS MEWP Boom (N108)

By Dynamic Training and Assessments Ltd

Automatic Driving Lessons London

By Drive2Pass School Of Motoring - Barnet

Search By Location