260 Health & Safety courses in Eastwood

REFERENCE CODE 610/0134/X COURSE LEVEL NVQ Level 3 THIS COURSE IS AVAILABLE IN Course Overview Who is this qualification for? This qualification is aimed at those who are involved in either site carpentry including first and second fixing, those who are involved in shopfitting site work or those who carry out shopfitting bench work. The qualification is at level 3 although there may be some units at different levels. Level 3 qualifications are primarily aimed at those who are fully trained and experienced in a wide range of work activities, It is not expected that candidates working in this industry all do the same activities or use the same equipment and machinery so the qualification has been developed to make it as widely available as possible. All work completed must be carried out in accordance with Building Regulations and Industry recognised safe working practices, including the disposal of waste. The qualification is structured to ensure that there is a high degree of flexibility within the pathways and units available and will allow employees from companies of all sizes and specialisms equal opportunity to complete. The qualification consists of 3 pathways. What is required from candidates? Qualifications are also required to indicate the number of hours of teaching someone would normally need to receive in order to achieve the qualification. These are referred to as Guided Learning Hours (GLH). The GLH for this qualification is 404. Pathway 1 Site Joinery, Pathway mandatory units Level Credits Installing bespoke first fixing components in the workplace Installing bespoke second fixing components in the workplace Setting up and using transportable cutting and shaping machines in the workplace Erecting roof structure carcassing components in the workplace Confirming work activities and resources for an occupational work area in the workplace Developing and maintaining good occupational working relationships in the workplace Confirming the occupational method of work in the workplace Conforming to general health, safety and welfare in the workplace Pathway 1 Site joinery – Optional units minimum of 1 unit must be achieved Erecting structural carcassing components in the workplace Maintaining non-structural and structural components in the workplace Pathway 2-Shopfitting site work-Pathway mandatory units Marking out from setting out details for routine shopfitting products in the Summary of the: GQA LEVEL 3 NVQ DIPLOMA IN WOOD OCCUPATIONS (CONSTRUCTION) Installing shopfitting frames and finishings in the workplace Installing shopfitting fitments in the workplace Installing shopfronts and finishings in the workplace Setting up and using transportable cutting and shaping machines in the workplace Confirming work activities and resources for an occupational work area in the workplace Developing and maintaining good occupational working relationships in the workplace Confirming the occupational method of work in the workplace Conforming to general health, safety and welfare in the workplace Pathway 3 – Shopfitting-Bench Work – Pathway mandatory units Producing setting out details for routine shopfitting products in the workplace Marking out from setting out details for routine shopfitting products in the workplace Manufacturing routine shopfitting products in the workplace Confirming work activities and resources for an occupational work area in the workplace Developing and maintaining good occupational working relationships in the workplace Confirming the occupational method of work in the workplace Manufacturing bespoke shopfitting products in the workplace Setting up and using fixed machinery in the workplace Conforming to general health, safety and welfare in the workplace Pathway 3 – Shopfitting – Bench work – Pathway optional units a minimum of 1 unit must be achieved Producing CAD setting out details in the workplace Producing wood and wood-based products using computer numerically controlled/numerically controlled (CNC/NC) machinery in the workplace Producing setting out details for bespoke shopfitting products in the workplace Assessment Guidance: Evidence should show that you can complete all of the learning outcomes for each unit being taken. Types of evidence: Evidence of performance and knowledge is required. Evidence of performance should be demonstrated by activities and outcomes, and should be generated in the workplace only, unless indicated under potential sources of evidence (see below). Evidence of knowledge can be demonstrated though performance or by responding to questions. Quantity of evidence: Evidence should show that you can meet the requirements of the units in a way that demonstrates that the standards can be achieved consistently over an appropriate period of time. Potential sources of evidence: The main source of evidence for each unit will be observation of the candidate’s performance and knowledge demonstrated during the completion of the unit. This can be supplemented by the following types of physical or documentary evidence: Accident book/reporting systems Photo/video evidence Safety records Work diaries Training records Timesheets Audio records Telephone Logs Job specifications and documentation Meeting records Delivery Records Records of toolbox talks Witness testimonies Equipment Correspondence with customers Prepared materials and sites Notes and memos Completed work Please Note that photocopied or downloaded documents such as manufacturers or industry guidance, H&S policies, Risk Assessments etc, are not normally acceptable evidence for GQA qualifications unless accompanied by a record of a professional discussion or Assessor statement confirming candidate knowledge of the subject. If you are in any doubt about the validity of evidence, contact Oscar Onsite Academy

This half-day workshop delivered face-to-face or online is designed for anyone in your organisation that wants to become a Neurodiversity Champion - someone who wants to educate and change the way that Neurodiversity is viewed in the workplace.

Safe Use & Pre-Use Inspection of Ladders & Steps

The three-day FAW course is our most thorough First Aid course. It is designed for you if you are a nominated First Aider in a hazardous environment, such as a factory or a construction site, as well as providing you with complete training for any other work situation.

The importance of building services to the success of an organisation has never been greater and continues to grow. Developers and occupiers are becoming more aware of the contribution that building services make to the well being of occupants and hence their perception of the quality of the working environment. Those involved with the design, construction, maintenance and operation will increasingly be required to deliver building services that demonstrable contribution to the occupier's business. Energy efficiency, carbon management and occupant satisfaction depend substantially on the way building services are designed, managed and operated. To optimise these aspects, an informed strategic approach is essential. Tried and tested techniques and processes are available that, when applied holistically, will deliver substantial benefits. This course reviews best practice in the area and inspires participants to ensure that building services perform at their optimal level. To provide a better understanding of how building services can be designed, managed and operated to: Maximise occupant comfort, satisfaction and wellbeing Add value and contribute to the success of the business of the occupier Improve health safety Reduce operating cost, energy use, carbon emissions and environmental impact Optimise cost and value Provide strategies for continuous improvement and sustainable operation 1 Building services fundamentals The function of services in commercial buildings and their importance to the core business 2 Techniques and processes for optimising cost and value Programmed operation evaluation Continuous commissioning Lifetime product management Performance-based service Energy efficiency and the scope for environmental improvement 3 Making the business case and preparing the strategy Motivating decision-makers Empowering those who have to deliver the results Managing business risk 4 Strategy implementation and monitoring results Ensuring that rich and robust feedback is available to support continuous improvement and strategy enhancementWhen to get feedbackWhyHowWhat to do with it 5 Case histories and 'air time' Sharing experience and addressing specific issues of interest to participants Course review Close

NPORS Quick Hitch Awareness (N034)

The First Aid at Work qualification is the most comprehensive of all our first aid qualifications, and covers a wide range of skills which can be used within a workplace first aid situation, including: assessing the scene, managing an unresponsive casualty, CPR, heart attacks, choking, head and spinal injuries, fractures, anaphylaxis, plus much more.

Paediatric First Aid Paediatric First Aid at Work Two Day Course Cost:  £125 + vat per person This course has been developed for those who are working with children and infants. It will be of particular interest to teachers, child minders, crèche assistants, playgroup personnel and anyone else who has a responsibility for their welfare whilst in your care. The purpose of the qualification is for the learner to attain the knowledge and practical competence required to deal with a range of paediatric first-aid situations. This two-day qualification fulfils the requirements for first aid training detailed in the Department for Education’s statutory framework for the Early Years Foundation Stage.  SYLLABUS A range of subjects is covered, including: Role of the Paediatric First Aider Primary survey Resuscitation (CPR including the safe use of an AED) Wounds, bleeding and shock Allergic reactions including anaphylaxis Head, neck and back injuries Seizure Choking Minor injuries Recovery position Fractures Foreign bodies Diabetic emergencies Asthma Meningitis Febrile convulsions Extreme cold and heat Electrical incidents Maximum of 12 People Students must be a minimum of 16 years of age to qualify. Numbers A maximum of 12 students can be accommodated on this course. CERTIFICATION The qualification is valid for three years from the date of achievement. It is recommended that the learner attends annual refresher training. The learner will need to complete the full course again to re-qualify for a further three years. First Aid • Life-Saving Skills First Aid Training is not just a Course; it’s a life-saving skill everyone should possess. It’s about being prepared for the unexpected knowing how to respond when seconds count. As Health & Safety Law mandates, employers must create a secure and healthy environment for their employees. This responsibility extends to providing immediate and effective First-Aid Care when necessary. We understand that learning is best achieved through practical application. That’s why we offer In-Person Workshops on First Aid. These workshops provide hands-on experience under the guidance of our highly qualified trainers. You’ll have the opportunity to practice what you’ve learned in a controlled environment before you need to apply it in real life. Upon completion of a First-Aid Qualification, employers can be assured that they have highly-trained personnel capable of responding swiftly and effectively to any First-Aid needs. This fulfils legal obligations and contributes to a safer, more caring work environment for all. In essence, the First Aid Certification is more than just a qualification; it’s an investment in the health and safety of your workforce.

A defibrillator (AED) plays an essential part when attempting to save the life of someone who is in cardiac arrest. This training aims to provide the learner with the knowledge, confidence and skills to effectively use the this equipment in a safe and competent manner.

Craft workshop using a variety of pre-cut glass materials including rods, frit and frit balls to transform into your choice of a bowl, hanging or free standing wave form. Fused Glass Workshop – Flower Garden Designs I want to share my 15+ years of experience with you. This fused glass workshop is held at my Derbyshire studio and gallery space in the middle of Wirksworth near Matlock. About this fused glass workshop Whether you create a design inspired by wild flower gardens, fields of Poppies, a layer of Bluebells or hills covered in Heather you’ll enjoy playing with glass shapes and textures to create your own abstract and colourful creation. Choose from 3 options of pre cut glass bases and create either a bowl, sculptural wave or hanging panel. Round Bowl – approx. 17cm. Wave – approx. 32cm across x 7 tall. Round Hanging – approx. 18cm Get making by snapping glass rods, sprinkling crushed glass frit and place frit balls for your colourful flower blooms. The main thing to remember is to have fun! You will play with different types of decorative glass elements and learn a little about how the kiln firing will change them. Simply complete your design during the session and leave it at the studio for me to fire, finish and clean up for you. We will make arrangements to pick up a few weeks later or I can post your finished piece at cost. I will talk through all the Health & Safety in the session but I want you to know now, you will be handling precut glass pieces, they have pointy ends but with the right handling, they won’t hurt you. Recommended for ages 13+, all under 16s to be accompanied by a paying adult. Please don’t hesitate to contact me to discuss any queries you may have, big or small and make sure to find me on Instagram and facebook to keep up to date with all the sparkles and to see images of previous students works. Photos shown here (and on my facebook page) are previous students makes. Book with friends or come on your own for a supportive and fun creative fused glass workshop experience. All fused glass workshop attendees receive a 10% discount on purchases from the gallery shop on the day, just a little way I can say thank you for joining me! Things to bring with you: A bottle of water or travel cup of coffee/tea An apron or old clothes so you don’t have to worry about getting glue or other materials on them Pictures or images that inspire you An open mind and willingness to experiment Booking When booking make sure your email address is correct at checkout as I will email you any further information needed for the workshop. Please also include a contact phone number in the unlikely event that I need to cancel a workshop at short notice. Venue: Create Space Studio & Gallery, 27 Market Place, Wirksworth, Matlock DE4 4ET Currently, the washroom facilities in the studio shop aren’t the best, they probably won’t ever be perfect but I do have a working w.c and sink now, just behind a curtain. I would still recommend considering supporting one of the independent cafés, restaurants and pubs who would welcome some extra business in return for a comfort break. Workshop T&Cs: Please read through the Terms & Conditions for Glass Fusing Workshops and Courses that are booked here online. When you book a place you are agreeing to the following terms and conditions. Bookings and cancellations Bookings – If you can not attend a workshop, for what ever reason, please contact Stevie as soon as possible. Firstly we will work together to transfer your place onto another day, suitable for your needs. Another option is for you to offer your place out to a friend or family member. If this is not possible and your cancellation has been more less than 21 days in advance of the event, a refund can be offered. If your cancellation has been made less than 21 days before the event and you can not transfer onto a future date, every effort will be made to fill your place, from further advertising and/or the reserves list. If your space can not be filled by another attendee and you are unable to arrange a replacement yourself unfortunately, no refund can be offered. In the unlikely event that Stevie has to cancel a class, you will be offered either a full refund or a transfer to another date. As much notice as possible will be given, however, Stevie cannot be held responsible for your travel or accommodation costs. Accessibility Accessibility – Workshops at Create Space, Wirksworth: Entrance to the Studio Gallery has 2 stone steps. The workshop table is fixed and also up one step, the main table is high, you will be stood or sat on a tall chair.  Please contact Stevie for information about the suitability of her courses for ages and abilities before booking. Health & Safety Stevie reserves the right to exclude any student we feel may be a danger to themselves or other students.