258 Health & Safety courses in Dewsbury

About this training course This 3-days training will provide a comprehensive review of integrity of wells exposed to carbon dioxide (CO2) in the context of Carbon Capture Utilization for enhanced oil recovery and Storage (CCUS). CO2 geological storage is a proven technology to reduce greenhouse gas emissions from sources such as coal power plants, cement kilns and steel mills. Wells are widely considered the most critical containment element, especially older wells that are not used to inject CO2 or monitor the plume evolution in the storage reservoir. The main reason for this perceived risk is the high corrosion rate of carbon steel when exposed to wet CO2, and the tendency of Portland cement to react with the gas. The training course advanced contents build on 15 years' experience in carbon storage, both in the development and deployment of technologies. First-hand, in-depth knowledge of the subject will allow us to debunk myths and focus on the real challenges of wells encountering CO2. Training Objectives After the completion of this training course, participants will be able to: Explain the CCUS market drivers Examine the behavior of CO2, on surface and in the reservoir Diagnose cement defects and design repairs Understand the limits of Portland cement Assess the benefits of different technologies and materials Realize why geology is a dominant factor in cement performance Critically choose the most appropriate monitoring techniques Classify aging processes of cement, steel, and rock when exposed to CO2 Assess the risk of existing wells if they encounter the CO2 plume Examine recent advances in real-time approaches to the production monitoring and lift management Target Audience This training course is suitable and will greatly benefit: All surface technical personnel such as process engineers & technologists Facility engineers, production engineers & technologists Drilling engineers and Well engineers Design engineers and Integrity engineers P&A engineers and Cementing engineers Geologists Senior management executives will benefit from this training as covers an overview of the technical and commercial details of CO2 capture technologies and risks involved. Course Level Intermediate Training Methods The training instructor relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all the topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught in their own organization. Course Duration: 3 days in total (21 hours). Training Schedule 0830 - Registration 0900 - Start of training 1030 - Morning Break 1045 - Training recommences 1230 - Lunch Break 1330 - Training recommences 1515 - Evening break 1530 - Training recommences 1700 - End of Training The maximum number of participants allowed for this training course is 20. This course is also available through our Virtual Instructor Led Training (VILT) format. Trainer Your expert course leader is an engineer with a passion for well integrity and possesses 28 years of international experience in field operations, technology development and management in the oil & gas and carbon storage sectors. Since 2018 he is program chair of the Well Integrity Technical Section of the Society of Petroleum Engineers (SPE). He is also author or co-author of 31 technical papers, a book chapter on CO2 geological storage and 7 patent applications. He delivers training on well integrity, plug and abandonment, asset integrity, risk management and QHSE across the Eastern Hemisphere, and carries out active research on harnessing geological barriers, modeling leaks through cement, and quantifying methane emissions from oil & gas wells. He has extensive expertise in: Well integrity, cementing, corrosion, upstream oil & gas (drilling, completion), carbon capture and storage, mathematical modeling, risk management, reliability, HSSE (health/safety/security/environment), asset integrity, management systems, sustainable development, project management, portfolio management, training, and technology development and innovation. He has personally worked on CCS projects in Europe (France, Germany, Netherlands, Norway), Algeria, Japan and USA. Partial list of companies that have benefited from the trainer's expertise: Vermilion Energy Geostock Aker BP Shell Statoil ENI TNO Geogreen Wintershall Archer INA and many more Recent CCS consulting track record: Schlumberger Total Oxand TNO THREE60 Energy and others POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information post training support and fees applicable

IOSH Managing Safely is for managers in any sector or organisation. The aim of the IOSH Managing Safely course is to make managers aware of the actions to take to handle health and safety within their organisation. The course enforces why health and safety are such important issues within any job role.

This qualification is ideal for those already working, or preparing to work within industry wishing to become a First Aider in the workplace for the purposes of the Health and Safety (First Aid) Regulations 1981 and the Health and Safety (First Aid) Regulations (Northern Ireland) 1982. Topics within this qualification are regarded by the Health & Safety Executive (HSE) as being important in maintaining good practice in the safe, prompt and effective treatment of injuries and ill health in the workplace. How long will it take me to achieve this qualification? This is a 1 credit qualification, with a guided learning hour’s value of 8 and it has a minimum contact time of 6 hours, which is typically delivered via a 1 day course. How is the qualification assessed? Learners must undertake a practical assessment of their competence along with a short open response knowledge assessment, where learners are required to provide a short response to a prescribed series of questions. What next? In line with guidance provided by the HSE, the qualification supports/approves work place emergency first aiders for a period of 3 years, after which point learners will need to retake the course. In addition to this, it is also recommended that learners refresh their knowledge annually.   Cost – £49.00 per delegate (including refreshments, certificates and workbooks) Get in touch via the contact us page for up and coming dates. Why not use your place of work and let us take the burden of travelling away from you.

Expert consultant to conduct Fire Risk Assessment of site/ workplace/ relevant building

Level 2 NVQ Certificate in Highways Maintenance - Excavation and Reinstatement Operations

Black CSCS Card NVQ Level 6 Diploma in Occupational Health and Safety Practice This qualification is aimed at health and safety managers who are responsible for developing and applying health and safety procedures day-to-day in their organisation. They may be a staff member, supervisor or manager looking to improve their knowledge and skills. Furthermore, once you have completed this NVQ you will be able to apply for GRADIOSH status. Induction - As soon as you register you will be given a dedicated assessor. They will arrange an induction and together with your assessor you'll get to decide on the pathway which best proves your competency. The induction is used to plan out how you will gather the relevant evidence to complete the course. During the course - The assessor will work with you to build a portfolio of evidence that allows you to showcase your knowledge, skills and experience. The assessor will also regularly review and provide you with feedback. This will allow you to keep on track to progress quickly. You will be assessed through various methods such as observations, written questions, evidence generated from the workplace, professional discussion and witness testimonials. On completion - Once all feedback has been agreed, the Internal Quality Assurer will review your portfolio and in agreement with your assessor the certificate will be applied for. To download our PDF for this course then please click here.

The Level 3 Award in Emergency First Aid at Work (RQF) is a regulated and nationally recognised qualification, specifically designed for those wishing to act as an emergency first aider in their workplace. Throughout this 1 day course, learners will develop the skills and knowledge needed to deal with a range of emergency first aid situations, including administering CPR, using a defibrillator, dealing with wounds and bleeding, minor injuries and more.

We deliver CSCS approved courses from the Base Business Space in Hull every Monday and Friday. Other days available on request! We also have access to a onsite CITB Test Centre! We have been supporting clients gain a CSCS Labourers and Skilled cards for over 10 years!

Level 2 NVQ Certificate in Highways Maintenance - Kerbs and Channels

The Institution of Occupational Health and Safety (IOSH) is a globally respected chartered body that champions the highest workplace standards of health and safety.  Safehouse are proud to offer training of the IOSH Managing Safely course. This training programme is designed for any individual who has organisational responsibilities for managing health and safety risks, resources and workplace practices. Once complete, it provides an excellent foundation for further study for those looking to pursue a career in health and safety and gain qualifications accredited by the National Examination Board in Occupational Safety and Health (NEBOSH) or NVQ Course Programme and Duration The IOSH Managing Safely course takes three full days to complete and covers, in detail, the core responsibilities of anyone tasked with managing workplace health and safety. Those responsibilities are covered in seven distinct units of study: Unit 1: Introducing managing safely Unit 2: Assessing risks Unit 3: Controlling risks Unit 4: Understanding responsibilities Unit 5: Understanding hazards Unit 6: Investigating incidents Unit 7: Measuring Performance To help prepare candidates for end-of-course examinations, daily interactive homework assignments and quizzes will also be set by the tutor. Certification In order to successfully complete the course and gain IOSH certification, delegates must complete a 45-minute examination to assess their learning and carry out a practical assessment to demonstrate the application of knowledge gained. Location At our Barnsley based training centre, with free parking on site bistro, free wifi and a great learning environment. Easily accessible from Junction 36 and 37 of the M1. Course Costs Course fees include expert tuition, course materials, examinations and certification. Costs are £395.00 plus VAT with discounts available for multiple booking / delegates.