44 Hair courses in Egham

In this afternoon session, you will create your very own set of 3 silver stacking rings. You will learn how to calculate your finger size, solder, form the metal, and texture and polish the silver to create your lovely stack of rings. You can decide on their design to create your own individual set. This is an excellent starting project for a beginner. For those with more experience, it is an opportunity to develop your skills further. WHEN: Saturday 17th August 2-5pm WHERE:  Workshop 925 based at The Mayford Centre, just outside of Woking and very close to Guildford. Unit F9 The Mayford Centre, Mayford Green Woking, Surrey  GU22 0PP TUTOR: Kirsten Hendrich WHAT DOES THE DAY INVOLVE? In this afternoon session, you will create your very own set of 3 silver stacking rings. You will learn how to calculate your finger size, solder, form the metal, and texture and polish the silver to create your lovely stack of rings. You can decide on their design to create your own individual set. This is an excellent starting project for a beginner. For those with more experience, it is an opportunity to develop your skills further. EXPERIENCE REQUIRED: None, all abilities are welcomed. Our small classes mean we are able to provide each student with the support they require. Students must be 16+ CLASS SIZE: 7 WHAT IS INCLUDED? All tools and consumables are supplied The cost of this course includes materials. YOU WILL BE PROVIDED WITH: Two 7.5 cm lengths 2mm silver sterling round wire One 7.5 cm length 2mm beaded silver sterling wire If you wish to purchase additional silver to create more rings (should time allow), we stock silver which you are able to purchase on the day. WHAT TO BRING: For safety reasons, during each class, you are required to wear appropriate footwear, we request that no open toed shoes are worn within Workshop 925. Long hair should also be tied back when working with the equipment. You may also wish to bring a notebook. We have handouts for many demonstrations, but there are always many tips and tricks given verbally by the tutor, which some might like to keep note of. PAYMENT OPTIONS: You can pay via our website or in our workshop in person using our card machine. If you prefer to pay directly, you can email us on hello@workshop925.com and we can invoice you manually to arrange a bank transfer. For classes over £80, instalment options are also available. Please email us on hello@workshop925.com to arrange. Gift Voucher – if you have a voucher to redeem, please email us before booking on hello@workshop925.com Please check your dates carefully before booking a class as we are unable to offer refunds. See our Terms & Conditions for full details.

This class is about getting to grips with Tube Setting. You will have to option to create a pendant or ring – maybe even two pieces if time allows. Krista will guide you through the process of tube setting where you will be using the Foredom Pendant Motor to cut a seat for your facetted brilliant cut stone. From here you can design and make your pendant or ring, solder your setting in place and then learn the techniques to set your stone. WHEN: Sunday 15th September 10-5pm WHERE:  Workshop 925 based at The Mayford Centre, just outside of Woking and very close to Guildford. Unit F9 The Mayford Centre, Mayford Green Woking, Surrey  GU22 0PP TUTOR: Krista Thomson WHAT DOES THE DAY INVOLVE? This class is about getting to grips with Tube Setting. You will have to option to create a pendant or ring – maybe even two pieces if time allows. Krista will guide you through the process of tube setting where you will be using the Foredom Pendant Motor to cut a seat for your facetted brilliant cut stone. From here you can design and make your pendant or ring, solder your setting in place and then learn the techniques to set your stone. Krista will guide you through each stage and there is time to practice settings so your can really understand the process correctly. We will be working with 4mm round facetted brilliant cut stones. If you would like to bring along your own stones, that is not a problem, Krista can advise if they are suitable on the day. We will work with Cubic zirconias as they are affordable, strong and perfect while you practice. Each student has their own fully equipped bench with its own Foredom Pendant Motor. We have put together a Pinterest Board to show how tube setting can be used within jewellery making. EXPERIENCE REQUIRED: It will help to have some experience with basic making skills. CLASS SIZE: 6 WHAT IS INCLUDED? All tools and consumables are supplied YOU WILL BE PROVIDED WITH: 0.8mm silver sheet – 0.5cm wide x 9cm length – for a band ring or pendant design. 2mm silver round wire – 15cm Length – for a pendant or 2 rings 4.5mm silver tube – 7cm 4mm Cubic Zirconias x 3 WHAT TO BRING: For safety reasons, during each class, you are required to wear appropriate footwear, we request that no open toed shoes are worn within Workshop 925. Long hair should also be tied back when working with the equipment. You may also wish to bring a notebook. We have handouts for many demonstrations, but there are always many tips and tricks given verbally by the tutor, which some might like to keep note of. Also pack your own lunch, snacks and drinks for the session. We regret we can’t offer tea and coffee at the moment due to Coronavirus so make sure you bring enough refreshments and supplies to keep you going during the day. PAYMENT OPTIONS: You can pay via our website or in our workshop in person using our card machine. If you prefer to pay directly, you can email us on hello@workshop925.com and we can invoice you manually to arrange a bank transfer. For classes over £80, instalment options are also available. Please email us on hello@workshop925.com to arrange. Gift Voucher – if you have a voucher to redeem, please email us before booking on hello@workshop925.com Please check your dates carefully before booking a class as we are unable to offer refunds. See our Terms & Conditions for full details.

Create your very own silver chain bracelet during this day workshop. We will guide you through all the processes involved in creating your own design. From cutting, shaping and texturing the silver, through to soldering and polishing. You will create each link and a T bar clasp. This is a fantastic project to help you learn or improve your soldering skills, and a great introduction to jewellery making. WHEN: Saturday 16th November 10-5pm WHERE:  Workshop 925 based at The Mayford Centre, just outside of Woking and very close to Guildford. Unit F9 The Mayford Centre, Mayford Green Woking, Surrey  GU22 0PP TUTOR: Kirsten Hendrich WHAT DOES THE DAY INVOLVE? Create your very own silver chain bracelet during this day workshop. We will guide you through all the processes involved in creating your own design. From cutting, shaping and texturing the silver, through to soldering and polishing. You will create each link and a T bar clasp. This is a fantastic project to help you learn or improve your soldering skills. If you are looking for some inspiration, we have created a Pinterest board to help inspire some ideas. You will be provided with 1.2mm thick wire for your links. We work really hard to make sure our students love what they create, so if you have a chunkier design idea in mind, please get in touch as the material costs increase and it can be more difficult to create thicker links, so we just need to check it is achievable within the time frame. EXPERIENCE REQUIRED: None, all abilities are welcomed. We support you throughout the session and provide demonstrations to show you the techniques and steps needed to create your own chain bracelet from start to finish. Our small classes mean we are able to provide each student with the support they require. Students must be 16+ Students aged 14 or 15 are able to attend if accompanied by an adult. CLASS SIZE: 7 WHAT IS INCLUDED? All tools and consumables are supplied. The cost of this course includes materials. YOU WILL BE PROVIDED WITH: 10cm of 2mm round wire to create your clasp 1.5 metres of 1.2mm silver round wire for your bracelet links If you wish to purchase additional silver to create alternative link thicknesses (should time allow), we stock silver which you are able to purchase on the day but please run your ideas through with us first by emailing hello@workshop925.com WHAT TO BRING: For safety reasons, during each class, you are required to wear appropriate footwear, we request that no open toed shoes are worn within Workshop 925. Long hair should also be tied back when working with the equipment. You may also wish to bring a notebook. We have handouts for many demonstrations, but there are always many tips and tricks given verbally by the tutor, which some might like to keep note of. Please bring any PPE, snacks and drinks to each session. We have a microwave, kettle and fridge to store or cook your lunch choices. PAYMENT OPTIONS: You can pay via our website or in our workshop in person using our card machine. If you prefer to pay directly, you can email us on hello@workshop925.com and we can invoice you manually to arrange a bank transfer. For classes over £80, instalment options are also available. Please email us on hello@workshop925.com to arrange. Gift Voucher – if you have a voucher to redeem, please email us before booking on hello@workshop925.com Please check your dates carefully before booking a class as we are unable to offer refunds. See our Terms & Conditions for full details.

Unlike other weekend classes which involve completing a specific project, this class hands the control over to you. You are able to design and make a project of your choice, that may be a project with the aim to practice a certain skill, or maybe you are looking to make a special present, or create something you have always wanted to own, this class provides you with the tutor support, professional tools and a friendly, welcoming environment to make your own designs. This is for current term time or summer term time students only. WHEN: Saturday 3rd August 10-5pm 2024 TUTOR: Sarah Reece WHERE:  Workshop 925 based at The Mayford Centre, just outside of Woking and very close to Guildford. Unit F9 The Mayford Centre, Mayford Green Woking, Surrey  GU22 0PP TUTOR: Sarah Reece WHAT DOES THE DAY INVOLVE? Unlike other weekend classes which involve completing a specific project, this class hands the control over to you. You are able to design and make a project of your choice, that may be a project with the aim to practice a certain skill, or maybe you are looking to make a special present, or create something you have always wanted to own, this class provides you with the tutor support, professional tools and a friendly, welcoming environment to make your own designs. This is for current term time or summer term time students only. Our workshop is equipped with everything a jeweller could wish for. You will have your very own solid jewellers workbench to work on to complete your projects and your own tool kit meaning you won’t have to wait for tools. Your bench is also equipped with its own pendant motor. In the workshop you will also find soldering equipment on each bench, a wide range of professional stone setting tools for various stone setting styles, a wide range of hand tools, texturing tools, a rolling mill, a hydraulic press, polishing equipment, dapping tools and punches, all of which will allow you the chance to create your designs within a professional setting. EXPERIENCE REQUIRED: You must be enrolled on our term time class or summer term or have experience. CLASS SIZE: 7 WHAT IS INCLUDED? All tools and consumables are supplied Please bring refreshments The cost of this course does not include materials. WHAT TO BRING: For safety reasons, during each class, you are required to wear appropriate footwear, we request that no open toed shoes are worn within Workshop 925. Long hair should also be tied back when working with the equipment. You may also wish to bring a notebook. We have handouts for many demonstrations, but there are always many tips and tricks given verbally by the tutor, which some might like to keep note of. Please bring any PPE, snacks and drinks to each session. We regret we can’t offer tea and coffee at the moment due to Coronavirus. PAYMENT OPTIONS: You can pay via our website or in our workshop in person using our card machine. If you prefer to pay directly, you can email us on hello@workshop925.com and we can invoice you manually to arrange a bank transfer. For classes over £80, instalment options are also available. Please email us on hello@workshop925.com to arrange.

The legendary Peter Keep from Jewellery Training Solutions is heading to Woking from Australia to teach his vast knowledge. Our focus within both courses on offer this weekend is to offer our students intricate technical knowledge which is quickly lost to new technology. Well skilled technical jewellers able to create multiple designs by hand are rare and in demand, Peter is dedicated to sharing his endless knowledge and tips, and while he can usually be found online, we are lucky enough to offer classes with Peter in person – a golden opportunity not to be missed. If you’re ready to boost your skills and make jewellery findings with a locking mechanism, this course with Peter are a must. Clasp making demands precision, calculation and attention to detail. You will learn how to fabricate the elements required to create the working parts of a clasp and learn how to combine these elements. Peter will guide you through each step to create your clasp, sharing his wonderful hints and tips he has developed through years of training and experience in the industry across the world. WHEN: Saturday 7th September 10-4/5 WHERE:  Workshop 925 based at The Mayford Centre, just outside of Woking and very close to Guildford. Unit F9 The Mayford Centre, Mayford Green Woking, Surrey  GU22 0PP TUTOR: Peter Keep –About WHAT DOES THE DAY INVOLVE? The legendary Peter Keep from Jewellery Training Solutions is heading to Woking from Australia to teach his vast knowledge. Our focus within both courses on offer this weekend is to offer our students intricate technical knowledge which is quickly lost to new technology. Well skilled technical jewellers able to create multiple designs by hand are rare and in demand, Peter is dedicated to sharing his endless knowledge and tips, and while he can usually be found online, we are lucky enough to offer classes with Peter in person – a golden opportunity not to be missed. If you’re ready to boost your skills and make jewellery findings with a locking mechanism, this course with Peter are a must. Clasp making demands precision, calculation and attention to detail. You will learn how to fabricate the elements required to create the working parts of a clasp and learn how to combine these elements. Peter will guide you through each step to create your clasp, sharing his wonderful hints and tips he has developed through years of training and experience in the industry across the world. You will learn advanced soldering skills to create a tubular barrel and learn how to form a hardened snap catch.This technique will open your mind to other types of catches & clips. Peter will show you some other options and explain how they work.These specialist skills can be applied across other aspects of jewellery making. You NEVER stop learning as far as the jewellery industry is concerned and it is Peter’s passion to maintain traditional skill. EXPERIENCE REQUIRED: Students should have some workshop experience and be confident using normal jewellery tools and equipment. If you are unsure, please email us at hello@workshop925.com to discuss any queries, we are always here to help. CLASS SIZE: 7 WHAT IS INCLUDED? All tools and consumables are supplied. WHAT TO BRING: For safety reasons, during each class, you are required to wear appropriate footwear, we request that no open toed shoes are worn within Workshop 925. Long hair should also be tied back when working with the equipment. You may also wish to bring a notebook. We have handouts for many demonstrations, but there are always many tips and tricks given verbally by the tutor, which some might like to keep note of. Please bring any lunch, snacks and drinks which you may want to your session. We have tea and coffee for you to help yourselves to. We supply all materials and tools. PAYMENT OPTIONS: You can pay via our website or in our workshop in person using our card machine. If you prefer to pay directly, you can email us on hello@workshop925.com and we can invoice you manually to arrange a bank transfer. For classes over £80, instalment options are also available. Please email us on hello@workshop925.com to arrange. Gift Voucher – if you have a voucher to redeem, please email us before booking on hello@workshop925.com Please check your dates carefully before booking a class as we are unable to offer refunds. See our Terms & Conditions for full details.

MASTERCLASS 8 CPD POINTS 1 DAY INTENSIVE COURSE  ONLINE or IN-CLINIC NOTE! After booking we will contact you for scheduling the exact course date! Courses dates are subject to change due to mentors availability. We will inform you via email if a date becomes available! Nose Job Masterclass You will perform this procedure on live models under the supervision and guidance of highly experienced aesthetic practitioners. You will be trained under ENT specialist. We will give you all the knowledge you need for a safe technique in your practice. A certification of training will be provided upon completion of the course. Practice will enable you to learn in 1-day ONE-TO-ONE Training You will also have the opportunity to view a mesotherapy treatment demonstration at the conclusion of the training. Upon successful completion of the course, you will receive a certificate and title of Mesotherapy Certified Practitioner. You need to be medically qualified as a doctor, dentist, nurse, pharmacist or paramedic with full governing body registration and have completed a Foundation Filler Course and to have administered a number of cases. Additional information ATTENDANCE ONLINE (Theory), IN CLINIC (Practice) COURSE LEVEL EXPERT | Masterclass Course

This is a full day intensive workshop which will teach you the processes involved in photo etching, including preparing the metal for etching, transferring the designs onto the metal using press and peel (P&P) paper and how to use specific etching solutions to cut the designs into the metal. This course will allow you to broaden your design process so that you can add some intricate textures to your copper and silver jewellery designs. You will be provided with a set amount of materials including copper sheet to practice the process and a 4cm by 4cm piece of silver sheet to create a silver textured pendant during your session. WHEN: Sunday 13th October 10-5pm WHERE:  Workshop 925 based at The Mayford Centre, just outside of Woking and very close to Guildford. Unit F9 The Mayford Centre, Mayford Green Woking, Surrey  GU22 0PP TUTOR: Krista Thomson WHAT DOES THE DAY INVOLVE? This is a full day intensive workshop which will teach you the processes involved in photo etching, including preparing the metal for etching, transferring the designs onto the metal using press and peel (P&P) paper and how to use specific etching solutions to cut the designs into the metal. This course will allow you to broaden your design process so that you can add some intricate textures to your copper and silver jewellery designs. You will be provided with a set amount of materials including copper sheet to practice the process and a 4cm by 4cm piece of silver sheet to create a silver textured pendant during your session. If you would like to create additional designs, you are welcome to bring along your own additional flat silver sheet, it must be no thinner than 0.6mm. This is a great opportunity to stock pile some great patterned silver for us with future projects. On the day you will be provided with some patterns to etch, if you have a set pattern in mind, please send us the artwork in good time for your class. Designs must be black and white only and please note smaller patterns work better than larger ones. Please email it to us at hello@workshop925.com. Alternatively instruction on where to purchase P&P paper and how to print your own designs onto it will be sent out prior to your course date to those of you who wish to etch your own designs. You will be etching the majority of the day, however if you would like to create a finished design, we can accommodate this, you can do some etching in the morning and create a design in the afternoon. EXPERIENCE REQUIRED: None, all abilities are welcomed. This course is a great introduction to etching for those who have a vast experience in jewellery making but have not yet tried this technique as well as beginners looking to create beautiful textural pieces of jewellery. Our small classes mean we are able to provide each student with the support they require. CLASS SIZE: 6 WHAT IS INCLUDED? All tools and consumables are supplied Please bring refreshments as we are no longer able to provide them The cost of this course includes copper sheet to practice the technique and a 4cm by 4cm section of silver sheet. The price also includes a selection of patterns printed on P&P paper to use during your course.  WHAT TO BRING: For safety reasons, during each class, you are required to wear appropriate footwear, we request that no open toed shoes are worn within Workshop 925. Long hair should also be tied back when working with the equipment. You may also wish to bring a notebook. We have handouts for many demonstrations, but there are always many tips and tricks given verbally by the tutor, which some might like to keep note of. Please bring any PPE, snacks and drinks to each session. We regret we can’t offer tea and coffee at the moment due to Coronavirus. PAYMENT OPTIONS: You can pay via our website or in our workshop in person using our card machine. If you prefer to pay directly, you can email us on hello@workshop925.com and we can invoice you manually to arrange a bank transfer. For classes over £80, instalment options are also available. Please email us on hello@workshop925.com to arrange. Gift Voucher – if you have a voucher to redeem, please email us before booking on hello@workshop925.com Please check your dates carefully before booking a class as we are unable to offer refunds. See our Terms & Conditions for full details.

This is a full day intensive workshop which will teach you the processes involved in photo etching, including preparing the metal for etching, transferring the designs onto the metal using press and peel (P&P) paper and how to use specific etching solutions to cut the designs into the metal. This course will allow you to broaden your design process so that you can add some intricate textures to your copper and silver jewellery designs. You will be provided with a set amount of materials including copper sheet to practice the process and a 4cm by 4cm piece of silver sheet to create a silver textured pendant during your session. WHEN: Sunday 3rd November 10-5pm WHERE:  Workshop 925 based at The Mayford Centre, just outside of Woking and very close to Guildford. Unit F9 The Mayford Centre, Mayford Green Woking, Surrey  GU22 0PP TUTOR: Krista Thomson WHAT DOES THE DAY INVOLVE? This is a full day intensive workshop which will teach you the processes involved in photo etching, including preparing the metal for etching, transferring the designs onto the metal using press and peel (P&P) paper and how to use specific etching solutions to cut the designs into the metal. This course will allow you to broaden your design process so that you can add some intricate textures to your copper and silver jewellery designs. You will be provided with a set amount of materials including copper sheet to practice the process and a 4cm by 4cm piece of silver sheet to create a silver textured pendant during your session. If you would like to create additional designs, you are welcome to bring along your own additional flat silver sheet, it must be no thinner than 0.6mm. This is a great opportunity to stock pile some great patterned silver for us with future projects. On the day you will be provided with some patterns to etch, if you have a set pattern in mind, please send us the artwork in good time for your class. Designs must be black and white only and please note smaller patterns work better than larger ones. Please email it to us at hello@workshop925.com. Alternatively instruction on where to purchase P&P paper and how to print your own designs onto it will be sent out prior to your course date to those of you who wish to etch your own designs. You will be etching the majority of the day, however if you would like to create a finished design, we can accommodate this, you can do some etching in the morning and create a design in the afternoon. EXPERIENCE REQUIRED: None, all abilities are welcomed. This course is a great introduction to etching for those who have a vast experience in jewellery making but have not yet tried this technique as well as beginners looking to create beautiful textural pieces of jewellery. Our small classes mean we are able to provide each student with the support they require. CLASS SIZE: 6 WHAT IS INCLUDED? All tools and consumables are supplied Please bring refreshments as we are no longer able to provide them The cost of this course includes copper sheet to practice the technique and a 4cm by 4cm section of silver sheet. The price also includes a selection of patterns printed on P&P paper to use during your course.  WHAT TO BRING: For safety reasons, during each class, you are required to wear appropriate footwear, we request that no open toed shoes are worn within Workshop 925. Long hair should also be tied back when working with the equipment. You may also wish to bring a notebook. We have handouts for many demonstrations, but there are always many tips and tricks given verbally by the tutor, which some might like to keep note of. Please bring any PPE, snacks and drinks to each session. We regret we can’t offer tea and coffee at the moment due to Coronavirus. PAYMENT OPTIONS: You can pay via our website or in our workshop in person using our card machine. If you prefer to pay directly, you can email us on hello@workshop925.com and we can invoice you manually to arrange a bank transfer. For classes over £80, instalment options are also available. Please email us on hello@workshop925.com to arrange. Gift Voucher – if you have a voucher to redeem, please email us before booking on hello@workshop925.com Please check your dates carefully before booking a class as we are unable to offer refunds. See our Terms & Conditions for full details.

In this unique course with tutor Sarah Reece you will learn how to cut two shapes of stones: The first will be a free form shape with a flat edges as shown in the images. The second the focus will be how to create a traditional cabochon. This stone will be have a flat base with a rounded top. This will be cut from rough stone which you can each select from Sarahs beautiful collection. You can decide the shape and size and which part of the stone you wish to use. The class size is limited to just 1 student. So you do not breathe in harmful rock dust during the process, you will be cutting the stone while it is in water. With this in mind, please wear older clothes, and waterproof shoes – wellies are advised as it is not a clean or dry activity. Water sprays from the rotating wheels as you are working. We will provide you with a waterproof apron. This course is an excellent introduction to stone cutting. It allows you to step into the world of Lapidary where you can cut and create any shaped stone you desire, you won’t be beholden to the shop bought stone. This means your projects and settings can become completely unique as per your designs. You will be working with a Cab King 6″ and the Diamond Pacific Pixie Cabbing Machine. We have factored in a 30 minute break for lunch during our Saturday sessions. Full info below… When: Sarah is available at weekends and during the week. If you decide to book a stone cutting course, there is flexibility for your booking. We will contact you to find a suitable session. Length: The session will last 4 hours Where:  THIS WORKSHOP COURSE IS BASED IN FARNHAM NOT OUR WOKING WORKSHOP Weydon Farm House Weydon Farm Lane GU9 8QJ There is parking on site. Tutor: Sarah Reece What does the session involve? In this unique course with tutor Sarah Reece you will learn how to cut two shapes of stones: The first will be a free form shape with flat edges (as shown in the images). The second the focus will be how to create a traditional cabochon. This stone will have a flat base with a rounded top. This will be cut from rough stone which you can select from Sarah’s beautiful collection. You can decide the shape and size and which part of the stone you wish to use. You will be cutting the stone while it is in water so you do not inhale harmful dusts. With this in mind, please wear older clothes, and waterproof shoes – wellies are advised as it is not a clean or dry activity. Water sprays from the rotating wheels as you are working. We will provide you with a waterproof apron. This course is an excellent introduction to stone cutting. It allows you to step into the world of Lapidary where you can cut and create any shaped stone you desire, you won’t be beholden to the shop bought stone. This means your projects and settings can become completely unique as per your designs. You will be working with a Cab King 6″ and the Diamond Pacific Pixie Cabbing Machine. The class size is limited to just 1 student. This Instagram post gives you a preview of what to expect from your session Experience required: None, all abilities are welcomed. We support you throughout the session and provide demonstrations to show you the techniques and steps needed to create your project. With one to one sessions, you will gain a large amount of support in this intensive introduction to stone cutting Class size: 1 What is included? All tools and consumables are supplied The stones you will carve are NOT INCLUDED in the price of the course – This is something you can choose on the day so you can select something you would like to work with. Sarah has priced up different varies in generous sizes ranging from £3-£20. If you would rather not buy stone to work with, no problem, Sarah has plenty of beautiful flint that you can use instead. What to bring: For safety reasons, during each class, you are required to wear appropriate footwear, we request that no open toed shoes are worn within the workshop. Wellies or older waterproof shoes advised. Long hair should also be tied back when working with the equipment. You may also wish to bring a notebook. There are always many tips and tricks given verbally by the tutor, which some might like to keep note of. Also pack your own snacks and drinks for the session if required.

Time: Wednesday Afternoon 12.30-2.30pm Dates: 24th July – 28th August (6 weeks) Length: 2 hours each week, each term runs for 6 weeks Tutor: Krista Thomson Where:  Workshop 925 Unit F9 The Mayford Centre, Mayford Green Woking, Surrey GU22 0PP What does the term time course involve?  Our term time classes allow students of all abilities the opportunity to design and create their own jewellery while learning new skills along the way. During the first session your tutor will settle you all in and get to grips with what each student is aiming to complete or learn during the term. Your tutor will discuss your different aims and goals, whether that’s really focusing upon learning and practicing a certain skill, or if it is to finish a specific project. Any new starters will be given a tour of the workshop and you will be introduced to some basic techniques during the first session, so you feel comfortable within the workshop. You can then discuss your ideas for the term and your tutor will help you with how and where to order materials from for your project, we have a substantial list of good suppliers and discount codes to get you started. Soon enough you will have a good understanding of the essential jewellery making skills which you can then go on to develop further, there are many areas of jewellery making to explore. Throughout your time with us, your tutor and peers will help you develop the skills and knowledge required to bring your designs to life. Each student will be working on their own projects, everybody has different directions and design ideas and techniques they want to work on. However during our terms we run demonstrations which are relevant to student projects to help them complete aspects of their project- other students are welcome to watch these too, we also run demonstrations requested by students, this might be a repeat of something a student would like a refresher on, or maybe a technique they would like to learn for their next project and we will also provide demonstrations to strive to introduce you to new skills. We also like to keep you up to date with industry news, show you designer inspiration to help you learn methods to process new ideas and gain an understanding of design processes behind jewellery making. We are very much here to support your development. The more terms you complete with us, the more time you have to develop a wide range of skills and a good understanding of the industry as a whole. Jewellery making skills take time to practice and learn. Here is a Pinterest board to inspire new starters. Summer Terms:  Summer terms differ from our regular terms. Regular term time students are not given first refusal of spaces to allow a break in the year, and our schedule changes as summer holidays and children being off school affect tutor availability. Summer term allows others the opportunity to secure a place. Should a space be available on the regular term time classes they will be offered to those on our waiting list, please email us at hello@workshop925.com if you would like to be on our waiting list for September – The regular term timers enrolled in July will have first refusal of their space for September any spaces will then be offered to those waiting list. Experience required: This class is suitable for those with any level of experience. Some students on our termly courses, have been with us for many years, others are beginners. We run a very welcoming and supportive environment, so whatever level your skills are at, you will always feel encouraged and supported by all to develop your ability further. Class size: We have 9 jeweller’s wooden workbenches in our workshop, however our term time classes always run with 6/7 students. 2 CATCH UPS are permitted over summer terms, meaning if you miss any classes due to holidays, you can catch these up on other sessions – it is not guaranteed we will have sessions available, however most sessions run with a space to accommodate a student on a catch up. Please make us aware of absences in advance. What is included? All tools and consumables are supplied Light refreshments are provided The cost of this course does not include materials. What to bring: For safety reasons, during each class, you are required to wear appropriate footwear, we request that no open toed shoes are worn within Workshop 925. Long hair should also be tied back when working with the equipment. You may also wish to bring a notebook. We have handouts for many demonstrations, but there are always many tips and tricks given verbally by the tutor, which some might like to keep note of. Please bring any, snacks and drinks to each session if you require refreshments.