• Professional Development
  • Medicine & Nursing
  • Arts & Crafts
  • Health & Wellbeing
  • Personal Development

27 EV Charging courses

DOMESTIC ELECTRICAL & EV CHARGING PACKAGE

By Tradeskills 4U

WHY TAKE THE DOMESTIC ELECTRICAL & EV CHARGING PACKAGE? Current demand for electric car charging points is increasing every year. This is being driven by changes to government policy which intend to eliminate all petrol and diesel cars by 2040. This means that in the run up to this change, domestic meter installs are predicted to rise drastically. This 25 Day Domestic EV Charging point installation course package is designed specifically for those who are new to the industry and teaches you both domestic electrics and EV car charging point installation. Demand for EV car charging point installers is rising and we are regularly approached by employers looking for trained installers.  Course Snapshot: This course covers advanced domestic installation (Step 1) plus a C&G Qualification in EV Charging Point installation. The Course breaks down as follows: 14 Days Practical In Centre 4 Days E-Learning 4 Days Virtual Classroom

DOMESTIC ELECTRICAL & EV CHARGING PACKAGE
Delivered In-PersonFlexible Dates
£2,809

C&G 2921-34 Electric Vehicle Charging Installations

4.7(1243)

By Technique Learning Solutions

This EV charging course is intended to provide expert guidance to learners wishing to gain knowledge and understanding on Electric Vehicle charging equipment installation. This 2 day course provides expert guidance on EV charging equipment installation, an important emerging area which is not covered in detail by the current edition of the Wiring Regulations (BS 7671) or the IET’s Guidance Notes. Aimed at experienced electricians interested in understanding a wide range of equipment and systems available, this course applies to the specialised installation requirements of electric vehicle charging equipment in domestic dwellings, on-street locations, commercial and industrial premises. This training course provides detailed guidance and recommendations on all aspects of the installation of Electric Vehicle Charging Equipment from the origin of the electrical supply, through distribution and final circuits, installation of the charging equipment itself to the cable between the charging equipment and vehicle’s electrical inlet. Also included are related issues of site layout and planning and subsequent inspection, testing, certification and maintenance of installations. Also Covering: How EV charging works How to select the correct EV Charging Point Solution for the customers needs. Technical requirements of installing & the use of different earthing arrangements (TN-C-S/TT systems) Planning requirements, labelling & risk assessments How to carry out surveys & Pre Installation considerations Meeting the requirements of BS7671 Awareness of the IET code of practice for Electrical Vehicle Charging Equipment & Installation. Plus much more Why take this EV charging course? Currently there is an increasing demand for new electric vehicle charging points but too few installers to roll them out. This is already a booming market which is due to get much bigger in the near future. The number of public charging connectors and locations has increased by 38% in the past 12 months and is expected to continue at that rate for years to come. Add this important service to future proof your knowledge to allow extra inspection & testing plus new installation work with this electric vehicle charging course. We have a variety of charging units and simulated installs which means it is just as working on a real installation. Making this installers course real value for money.

C&G 2921-34 Electric Vehicle Charging Installations
Delivered in Scotland + 1 more or Online + more
£500

EAL Electric Vehicle Charging Equipment Installation

4.7(1243)

By Technique Learning Solutions

This qualification aims to provide expert guidance to learners wishing to gain knowledge and understanding on Electric Vehicle charging equipment installation. This 2 day course provides expert guidance on EV charging equipment installation, an important emerging area which is not covered in detail by the current edition of the Wiring Regulations (BS 7671) or the IET’s Guidance Notes. Aimed at experienced electricians interested in understanding a wide range of equipment and systems available, this course applies to the specialised installation requirements of electric vehicle charging equipment in domestic dwellings, on-street locations, commercial and industrial premises. The course provides detailed guidance and recommendations on all aspects of the installation of Electric Vehicle Charging Equipment from the origin of the electrical supply, through distribution and final circuits, installation of the charging equipment itself to the cable between the charging equipment and vehicle’s electrical inlet. Also included are related issues of site layout and planning and subsequent inspection, testing, certification and maintenance of installations. Why take this course? Currently there is an increasing demand for new electric vehicle charging points but too few installers to roll them out. This is already a booming market which is due to get much bigger in the near future. The number of public charging connectors and locations has increased by 38% in the past 12 months and is expected to continue at that rate for years to come. Entry Requirements There are no formal entry requirements for this qualification, however we do expect you to meet the following requirements: Minimum age 18 years old (mandatory) Must be able to demonstrate the following competencies Be able to correctly install and terminate: pvc/pvc cable (twin and earth) Steel Wire armoured cable (swa) Be able to carry out an initial verification (inspection & testing) on an electrical installation and complete the necessary paperwork. Please Note: These competencies are required for the assessment and are not taught as part of the course. It is also recommended that you are up to date with your wiring regulations.

EAL Electric Vehicle Charging Equipment Installation
Delivered in Scotland + 1 more or Online + more
£500

Installation of Electric Vehicle Charging Points (Level 3)

5.0(39)

By City Training Group

Become an EV Charging Point Specialist: Level 3 Installation Course This comprehensive Level 3 course, recognized by all competent persons schemes (CPS) and the Office for Zero Emission Vehicles (OZEV), equips you with the skills and knowledge to install domestic and commercial EV charging points. Partner Advantage: We've partnered with leading EV charging point manufacturers, ensuring you gain the knowledge to install their equipment directly after the course. Boost Your Business: Gain access to a network of leads and contacts to jump-start your EV charging point installation business. You can currently claim up to £14,000 in installs per business (across up to 40 charging points). Prerequisites: Formal craft qualification (e.g., N/SVQ 3 in Electrical Installation) or equivalent earlier certification. 18th Edition qualification What to Bring: Photo ID Passport-sized photo Invest in your future and become a sought-after EV charging point specialist. Enrol today!

Installation of Electric Vehicle Charging Points (Level 3)
Delivered In-PersonFlexible Dates
£199

CE539: Electric Vehicle Charging Equipment (EVCE) Preparedness

By Solar Energy International (SEI)

After completing this course, participants will be able to: Contrast the difference between types of Electric Vehicles (EV) including Hybrid Electric Vehicles (HEV), Plug-in Hybrid Electric Vehicles (PHEV) and Battery Electric Vehicles (BEV). Describe the various commercial and industrial EV in the marketplace and their charging equipment requirements. Demonstrate awareness of the various terminologies used throughout the EV industry to describe equipment supplying energy to charge EV. Describe the difference between AC Electric Vehicle Supply Equipment (EVSE), DC charging equipment, and wireless EV charging. Explain the benefits of conducting a site assessment and what should be considered when installing Electric Vehicle Charging Equipment (EVCE). Demonstrate an awareness of specific utility and municipal requirements for the installation of EVCE.

CE539: Electric Vehicle Charging Equipment (EVCE) Preparedness
Delivered Online On Demand
£151.91

City & Guilds Electric Vehicle Charging Equipment Installation

4.7(1243)

By Technique Learning Solutions

This qualification aims to provide expert guidance to learners wishing to gain knowledge and understanding on Electric Vehicle charging equipment installation. This 2 day course provides expert guidance on EV charging equipment installation, an important emerging area which is not covered in detail by the current edition of the Wiring Regulations (BS 7671) or the IET’s Guidance Notes. Aimed at experienced electricians interested in understanding a wide range of equipment and systems available, this course applies to the specialised installation requirements of electric vehicle charging equipment in domestic dwellings, on-street locations, commercial and industrial premises. The course provides detailed guidance and recommendations on all aspects of the installation of Electric Vehicle Charging Equipment from the origin of the electrical supply, through distribution and final circuits, installation of the charging equipment itself to the cable between the charging equipment and vehicle’s electrical inlet. Also included are related issues of site layout and planning and subsequent inspection, testing, certification and maintenance of installations. Why take this course? Currently there is an increasing demand for new electric vehicle charging points but too few installers to roll them out. This is already a booming market which is due to get much bigger in the near future. The number of public charging connectors and locations has increased by 38% in the past 12 months and is expected to continue at that rate for years to come. Entry Requirements There are no formal entry requirements for this qualification, however we do expect you to meet the following requirements: Minimum age 18 years old (mandatory) Must be able to demonstrate the following competencies Be able to correctly install and terminate: pvc/pvc cable (twin and earth) Steel Wire armoured cable (swa) Be able to carry out an initial verification (inspection & testing) on an electrical installation and complete the necessary paperwork. Please Note: These competencies are required for the assessment and are not taught as part of the course. It is also recommended that you are up to date with your wiring regulations.

City & Guilds Electric Vehicle Charging Equipment Installation
Delivered in Clay Cross or Online
£500

Online Electric Vehicle Charging Equipment Installation to BS7671:2018 AMD 1

4.7(1243)

By Technique Learning Solutions

Who should learn? This course has been designed for those who are new to EV Charging Installations or for those requiring a better understanding of electric vehicle charging equipment installations. Learners using this course could be from any background or industry sector, from apprentices through to senior managers. Course Introduction This online course will cover the key aspects of the design, specification and installation of Electric Vehicle Charging Equipment Installation. This course will look at the requirements detailed in Section 722 of BS 7671:2018+A1:2020 as well as the IET Code of Practice for Electric Vehicle Charging Equipment Installation, 4th Edition. The course will also help to enhance your expertise on the best practice for Electric Vehicle Charging Equipment Installation, providing you with a deeper understanding of how to select and use the correct earthing systems to protect against electric shock as well looking into vehicle-to-grid, on street installations and smart infrastructure integration. We would recommend that you purchase a copy of The Code of Practice For Electric Vehicle Charging Equipment Installation, Fourth Edition to get the best out of this course. Learning Objectives Through this online course, you will learn: How to specify Electric Vehicle Charging Equipment Installations How to design electrical installations containing electric vehicle charging and supply equipment The steps involved in planning, installing and commissioning of electric vehicle charging points Key risks and hazards for various types of installation, and how to address them, including: Dwellings, Commercial and Industrial premises, On-Street installations, and filling stations.

Online Electric Vehicle Charging Equipment Installation to BS7671:2018 AMD 1
Delivered In-PersonFlexible Dates
£500

Online EVC

4.7(1243)

By Technique Learning Solutions

Who should learn? This course has been designed for those who are new to EV Charging Installations or for those requiring a better understanding of electric vehicle charging equipment installations. Learners using this course could be from any background or industry sector, from apprentices through to senior managers. Course Introduction This online course will cover the key aspects of the design, specification and installation of Electric Vehicle Charging Equipment Installation. This course will look at the requirements detailed in Section 722 of BS 7671:2018+A1:2020 as well as the IET Code of Practice for Electric Vehicle Charging Equipment Installation, 4th Edition. The course will also help to enhance your expertise on the best practice for Electric Vehicle Charging Equipment Installation, providing you with a deeper understanding of how to select and use the correct earthing systems to protect against electric shock as well looking into vehicle-to-grid, on street installations and smart infrastructure integration. We would recommend that you purchase a copy of The Code of Practice For Electric Vehicle Charging Equipment Installation, Fourth Edition to get the best out of this course. Learning Objectives Through this online course, you will learn: How to specify Electric Vehicle Charging Equipment Installations How to design electrical installations containing electric vehicle charging and supply equipment The steps involved in planning, installing and commissioning of electric vehicle charging points Key risks and hazards for various types of installation, and how to address them, including: Dwellings, Commercial and Industrial premises, On-Street installations, and filling stations.

Online EVC
Delivered OnlineFlexible Dates
£500

EV Battery Design and Charger Technology – Understand The Applications Of Sustainable Mobility

By EnergyEdge - Training for a Sustainable Energy Future

Unlock the future of sustainable mobility with EnergyEdge. Explore EV battery design and charger technology in our comprehensive training program. Join now!

EV Battery Design and Charger Technology – Understand The Applications Of Sustainable Mobility
Delivered In-PersonFlexible Dates
£2,399 to £2,499

Fundamentals of Electric Vehicles Course

3.5(2)

By Elearncollege

Description Fundamentals of Electric Vehicles  Introducing the Fundamentals of Electric Vehicles Diploma, a comprehensive online course designed to equip learners with essential knowledge and skills in the rapidly growing field of electric vehicles (EVs). This course provides a thorough understanding of the critical components, systems, and technologies that make electric vehicles an increasingly attractive and sustainable transportation option. The Fundamentals of Electric Vehicles Diploma is tailored for individuals seeking a solid foundation in the various aspects of electric vehicle technology. Whether an automotive enthusiast, an engineering professional, or someone interested in pursuing a career in the EV industry, this course offers valuable insights and practical knowledge to help stay ahead in this dynamic and evolving sector. Starting with an Introduction to Electric Vehicles, learners will gain an overview of the history, types, and benefits of electric vehicles, as well as the key components and subsystems that enable their operation. The course will also delve into the Battery Technology for Electric Vehicles, providing an in-depth understanding of the different types of batteries, their chemistry, and the factors influencing their performance and lifespan. Electric Motors for Electric Vehicles is another essential topic covered in the Fundamentals of Electric Vehicles Diploma. Participants will explore various electric motor types, their working principles, and their applications in EVs. The course also covers Power Electronics for Electric Vehicles, addressing the critical role of power electronics in controlling and converting electrical energy in electric vehicle systems. A robust Charging Infrastructure for EVs is fundamental to their widespread adoption. This course thoroughly examines different charging technologies, their compatibility with various electric vehicles, and the challenges and opportunities in developing a comprehensive EV charging network. Furthermore, the course delves into Energy Management in Electric Vehicles, discussing strategies to optimise energy consumption and extend the driving range of EVs. The Fundamentals of Electric Vehicles Diploma also covers Thermal Management in Electric Vehicles, a crucial aspect of ensuring battery and motor performance, reliability, and longevity. Participants will learn about various thermal management techniques and their applications in electric vehicles. Vehicle Dynamics and Control in Electric Vehicles is another key topic, focusing on the unique challenges and opportunities in ensuring stability, handling, and ride comfort in electric vehicles. Design and Integration of Electric Drivetrains is an important aspect of developing efficient and high-performance electric vehicles. The course provides insights into the design and integration of drivetrain components, as well as their influence on overall vehicle performance. Finally, the Fundamentals of Electric Vehicles Diploma addresses Future Trends and Developments in Electric Vehicles, offering a forward-looking perspective on emerging technologies, market trends, and potential advancements in the EV industry. By completing the Fundamentals of Electric Vehicles Diploma, learners will have acquired a well-rounded understanding of electric vehicle technology, enabling them to contribute effectively to the EV industry or pursue further studies in this fascinating domain. Enrol today to start your journey towards becoming an expert in electric vehicle technology and help shape the future of sustainable transportation. What you will learn   1:Introduction to Electric Vehicles  2:Battery Technology for Electric Vehicles  3: Electric Motors for Electric Vehicles  4:Power Electronics for Electric Vehicles  5:Charging Infrastructure for EV  6:Energy Management in Electric Vehicles  7:Thermal Management in Electric Vehicles  8:Vehicle Dynamics and Control in Electric Vehicles  9:Design and Integration of Electric Drivetrains  10:Future Trends and Developments in Electric Vehicles  Course Outcomes After completing the course, you will receive a diploma certificate and an academic transcript from Elearn college. Assessment Each unit concludes with a multiple-choice examination. This exercise will help you recall the major aspects covered in the unit and help you ensure that you have not missed anything important in the unit. The results are readily available, which will help you see your mistakes and look at the topic once again. If the result is satisfactory, it is a green light for you to proceed to the next chapter. Accreditation Elearn College is a registered Ed-tech company under the UK Register of Learning( Ref No:10062668). After completing a course, you will be able to download the certificate and the transcript of the course from the website. For the learners who require a hard copy of the certificate and transcript, we will post it for them for an additional charge.

Fundamentals of Electric Vehicles Course
Delivered Online On Demand9 days
£99

Educators matching "EV Charging"

Show all 22