• Professional Development
  • Medicine & Nursing
  • Arts & Crafts
  • Health & Wellbeing
  • Personal Development

3178 Engineering courses in Mildenhall delivered Online

PLC 5 Day

4.7(1243)

By Technique Learning Solutions

We have an extensive range of PLC training courses available covering all PLC manufacturers and levels of expertise from the complete novice to the advanced. ALL of our training courses can be tailoured to your own requirements. ALL our courses will be based on the relevant software and hardware. We aim to make ALL our courses as practical as possible, leading to ‘real world’ skills and not just theoretical skills. No prior knowledge is required for this course as it starts from scratch and assumes no previous experience, you will reach the skilled level where you can look at becoming a programmer, get into engineering maintenance in an industrial environment, fault find or make amendments to programs, this is the course for you. The ‘Typical’ 5 day course usually covers 2 or 3 of the major manufacturers, Siemens S7, Allen Bradley and Mitsubishi (This can be amended to other manufacturers if you have a particular requirement). The course aims to be 90% practical, as we believe the easiest way to learn is to do it! Every student works on their own dedicated training rig and computer, enabling you to get the most from the course. A full set of course notes and a USB drive full of other manuals is provided at the end of the course. We can also cover a wide range of manufacturers including : Siemens Step 5 PLC Training (Using Step 5, Quadriga or Others) Allen Bradley PLC 3 & 5 Training (AB6200 Software) RSLogix 5 PLC Training SLC PLC Training (RSLogix 500) ControlLogix PLC Training (RS Logix5000) MicroLogix PLC Training (RSLogix 500) S7-200 PLC Training (Step 7 Micro) S7-300 PLC Training (Step 7 or TIA Portal) S7-400 PLC Training (Step 7 or TIA Portal) Kuhnke PLC Training (Kubes) Omron PLC Training (Syswin) Modicon PLC Training (ProWorx and Others) Mitsubishi PLC Training (Medoc, GX Developer, GPP & Others) Toshiba PLC Training GE Fanuc PLC Training GEM 80 PLC Training Telemecanique PLC Training Most other PLC manufacturer training undertaken. We also cover a wide range of SCADA Systems to enable engineers to modify and add to existing screens, fault find through systems, set up communications etc.

PLC 5 Day
Delivered in Clay Cross + 1 more or Online + more
£500

We have an extensive range of PLC training courses available covering all PLC manufacturers and levels of expertise from the complete novice to the advanced. ALL of our training courses can be tailoured to your own requirements. ALL our courses will be based on the relevant software and hardware. We aim to make ALL our courses as practical as possible, leading to ‘real world’ skills and not just theoretical skills. No prior knowledge is required for this course as it starts from scratch and assumes no previous experience, you will reach the skilled level where you can look at becoming a programmer, get into engineering maintenance in an industrial environment, fault find or make amendments to programs, this is the course for you. The ‘Typical’ 10 day level 3 course usually covers 2 or 3 of the major manufacturers, Siemens S7, Allen Bradley and Mitsubishi (This can be amended to other manufacturers if you have a particular requirement). The course aims to be 90% practical, as we believe the easiest way to learn is to do it! Every student works on their own dedicated training rig and computer, enabling you to get the most from the course. A full set of course notes and a USB drive full of other manuals is provided at the end of the course. We can also cover a wide range of manufacturers including : Siemens Step 5 PLC Training (Using Step 5, Quadriga or Others) Allen Bradley PLC 3; 5 Training (AB6200 Software) RSLogix 5 PLC Training SLC PLC Training (RSLogix 500) ControlLogix PLC Training (RS Logix5000) MicroLogix PLC Training (RSLogix 500) S7-200 PLC Training (Step 7 Micro) S7-300 PLC Training (Step 7 or TIA Portal) S7-400 PLC Training (Step 7 or TIA Portal) Kuhnke PLC Training (Kubes) Omron PLC Training (Syswin) Modicon PLC Training (ProWorx and Others) Mitsubishi PLC Training (Medoc, GX Developer, GPP & Others) Toshiba PLC Training GE Fanuc PLC Training GEM 80 PLC Training Telemecanique PLC Training Most other PLC manufacturer training undertaken. We also cover a wide range of SCADA Systems to enable engineers to modify and add to existing screens, fault find through systems, set up communications etc.

PLC 10
Delivered in Clay Cross + 1 more or Online + more
£500

Site Management Safety Training Scheme (SMSTS) 5 day course

By SMC Safety Solutions

This five-day course is a must for anyone who is considering or already working in a role with site manager responsibilities. This course covers all relevant legislation affecting safe working in the building, construction, and civil engineering industries. It is endorsed by Build UK as the standard training for all construction managers. Aims To give a clear understanding of health, safety, welfare, and environmental legislation that affects your management role. It highlights the need for risk assessment in the workplace, the implementation of the necessary control measures and adequate communication to sustain a health and safety culture within the workforce. Course Content To give a clear understanding of health, safety, welfare, and environmental legislation that affects your management role. It highlights the need for risk assessment in the workplace, the implementation of the necessary control measures and adequate communication to sustain a health and safety culture within the workforce. Course Content • Health, safety, welfare and environmental legislation affecting your daily work • New guidance and industry best practice • Duties and responsibilities with regards to health, safety, welfare, and the environment • Safe working Prerequisites This course is for you if you’re considering, or already have management responsibilities for planning, organising, monitoring, controlling and administering groups of staff e.g. site manager. Assessment At the end of this course, all delegates will have a clear understanding of controlling health and safety on site from a manager’s role. Certificate The certification for this course is valid for 5 years and is endorsed by Build UK as a standard training for all site managers. To remain certified in this area, you will need to take a refresher course before the expiry date on your certificate, otherwise the full course will need to be retaken. Instructions Please note all online Site Management Safety Training Scheme courses with the venue “Online” will be delivered by a tutor over a video call. This training will be delivered and assessed in English language; therefore, a good standard is required to complete the course. Further attendee information will be sent in a separate email, please check your inbox.

Site Management Safety Training Scheme (SMSTS) 5 day course
Delivered in Stratford + 1 more or Online + more
£479

Health & Safety Awareness (for Green CSCS)

By SMC Safety Solutions

This one-day course is a must for anyone considering or already working within a construction or civil engineering environment. This course provides Health and Safety awareness and is endorsed by Build UK as a standard training for all operatives on site. Aims To give a clear understanding of Regulations & Legislation that applies to construction work and is an ideal refresher for any operative that has previously completed training in Health & Safety. Course Content • Accident prevention • Health & Safety law • Control and management of the site and your how your role fits in with this • Risk assessments and method statements • Performing safely on site • Reporting unsafe acts to prevent an accident • Individual & employee responsibilities • What to do if you think anyone’s Health and Safety is being put at risk Assessment At the end of this course, all delegates will have a clear understanding of the requirements of Health and Safety Legislation and their responsibilities to comply with them. Candidates will need to complete a multiple-choice exam at the end of the CITB course. They will also need to engage and interact with others throughout the day. Certificate This certification for this course is valid for 5 years and is endorsed by Build UK as a standard training for all operatives. The certificate is part of CSCS Green Card requirements. To remain certified in this area, you will need to retake the course before the expiry date or have completed an NVQ2 or higher in your skills set. Instructions Please note all Health & Safety Awareness courses with the venue “Remote Learning” will be delivered by a tutor over a video call. This training will be delivered and assessed in English language; therefore, a good standard is required to complete the course. Further attendee information will be sent in a separate email, please check your inbox.

Health & Safety Awareness (for Green CSCS)
Delivered in Chelmsford or Online + more
£135

2year Masters program with Experience certificate and Chartered Engineering status

By JP Jacobs International University

Mep Design Engineering

2year Masters program with Experience certificate and Chartered Engineering status
Delivered Online
£3,000

TACR 20

4.7(1243)

By Technique Learning Solutions

Our intensive 10, 15 or 20 day Total Air Conditioning and Refrigeration training courses have been structured to meet the ever increasing demands on industry to meet safety, environmental and legal requirements regarding installation, commissioning, service and maintenance of both refrigeration and air conditioning systems including the electrical aspects of installation dependent upon course selection. The first 10 days of the Total Air Conditioning and Refrigeration training course are mechanical only, the following 5 or 10 days are the electrical aspects, depending on which route you need to go down. The Total Air Conditioning and Refrigeration training courses are accredited with the City & Guilds 2079, BESA Pipework and Brazing – (commercial), along with an EAL Unit* – Maintenance of Refrigeration Systems from the EAL Certificate in Engineering Technology (QCF) qualification. (*Practical elements will be covered during the course with a Project booklet to be completed by the student with an element of self-study after the course completion for us to claim the Unit certification from EAL). Our Total Air Conditioning and Refrigeration training courses are designed to be as practical as they possibly can be, with workshop time taking more than 70% of the course. During the Total Air Conditioning and Refrigeration training course, you will, install, repair, fault find, adapt and commission on a variety of different equipment, because we believe the way to learn is to do it!! With ALL our courses we offer unbiased technical support and access to a wealth of knowledge and information upon completion. Once you’ve completed your course with Technique, you can be assured that our service doesn’t end there…

TACR 20
Delivered in Clay Cross or Online + more
£500

TACR 15

4.7(1243)

By Technique Learning Solutions

Our intensive 10, 15 or 20 day Total Air Conditioning and Refrigeration training courses have been structured to meet the ever increasing demands on industry to meet safety, environmental and legal requirements regarding installation, commissioning, service and maintenance of both refrigeration and air conditioning systems including the electrical aspects of installation dependent upon course selection. The first 10 days of the Total Air Conditioning and Refrigeration training course are mechanical only, the following 5 or 10 days are the electrical aspects, depending on which route you need to go down. The Total Air Conditioning and Refrigeration training courses are accredited with the City & Guilds 2079, BESA Pipework and Brazing – (commercial), along with an EAL Unit* – Maintenance of Refrigeration Systems from the EAL Certificate in Engineering Technology (QCF) qualification. (*Practical elements will be covered during the course with a Project booklet to be completed by the student with an element of self-study after the course completion for us to claim the Unit certification from EAL). Our Total Air Conditioning and Refrigeration training courses are designed to be as practical as they possibly can be, with workshop time taking more than 70% of the course. During the Total Air Conditioning and Refrigeration training course, you will, install, repair, fault find, adapt and commission on a variety of different equipment, because we believe the way to learn is to do it!! With ALL our courses we offer unbiased technical support and access to a wealth of knowledge and information upon completion. Once you’ve completed your course with Technique, you can be assured that our service doesn’t end there…

TACR 15
Delivered in Clay Cross or Online + more
£500

TACR 10

4.7(1243)

By Technique Learning Solutions

Our intensive 10, 15 or 20 day Total Air Conditioning and Refrigeration training courses have been structured to meet the ever increasing demands on industry to meet safety, environmental and legal requirements regarding installation, commissioning, service and maintenance of both refrigeration and air conditioning systems including the electrical aspects of installation dependent upon course selection. The first 10 days of the Total Air Conditioning and Refrigeration training course are mechanical only, the following 5 or 10 days are the electrical aspects, depending on which route you need to go down. The Total Air Conditioning and Refrigeration training courses are accredited with the City & Guilds 2079, BESA Pipework and Brazing – (commercial), along with an EAL Unit* – Maintenance of Refrigeration Systems from the EAL Certificate in Engineering Technology (QCF) qualification. (*Practical elements will be covered during the course with a Project booklet to be completed by the student with an element of self-study after the course completion for us to claim the Unit certification from EAL). Our Total Air Conditioning and Refrigeration training courses are designed to be as practical as they possibly can be, with workshop time taking more than 70% of the course. During the Total Air Conditioning and Refrigeration training course, you will, install, repair, fault find, adapt and commission on a variety of different equipment, because we believe the way to learn is to do it!! With ALL our courses we offer unbiased technical support and access to a wealth of knowledge and information upon completion. Once you’ve completed your course with Technique, you can be assured that our service doesn’t end there…

TACR 10
Delivered in Clay Cross or Online + more
£500

Mechanical Engineering, Engineering Management & Engineering Calculus

By Imperial Academy

Level 3 - Three QLS Endorsed Diploma | QLS Hard Copy Certificate Included | Plus 10 CPD Courses | Lifetime Access

Mechanical Engineering, Engineering Management & Engineering Calculus
Delivered Online On Demand
£399

BSc (Hons) Motorsport Engineering

5.0(1)

By National Motorsport Academy

Study flexibly online with NMA for a BSc (Hons) Motorsport Engineering and open the door to an exciting career in motorsport. Study around work and family and choose your own start date. This course will teach you the specialist skills required by this competitive global industry.

BSc (Hons) Motorsport Engineering
Delivered OnlineFlexible Dates
£6,900

Educators matching "Engineering"

Show all 4
Breathing Buildings

breathing buildings

Soham

Breathing Buildings was formed in 2006 following the development of the proprietary e-stack mixing ventilation system, as part of a major research programme at Cambridge University and MIT, funded by BP. The technology was filed for patent by the University of Cambridge, and Breathing Buildings has exclusive rights to this IP. Since then, we have changed the world of ventilation. The company is now the UK’s leading provider of controlled hybrid and natural ventilation systems. What this means for you We are passionate about everything we do. Our philosophy is to simply to be the best. From the moment a customer has a query about how to ventilate their building, they are supported by a remarkable team of MEng and PhD engineers who help our clients design truly stunning low energy buildings with stimulating environments, superb air quality and thermal comfort. Our consulting engineers work with the design team to discuss the different ventilation options and provide in-depth analysis to ensure our buildings do not overheat. We are the only company in the industry who can provide the whole range of tools to model ventilation in buildings; dynamic thermal modelling, computational fluid dynamics, water-bath modelling, zonal modelling, analytical modelling, and bespoke energy modelling. Once a system is ordered our project engineers liaise with our UK factory to coordinate the delivery of products and control systems to sites across the UK. Our commissioning team then ensures that every system we supply is properly installed, and can be monitored as part of our after-sales service. Innovation We have an ongoing program of product development and our links with the University of Cambridge are very strong. The Breathing Buildings team contributes to the teaching at the university and research into hybrid and natural ventilation. Please see our reference list of background papers and look at our YouTube channel to see various lectures. 

PETM

petm

5.0(27)

Peterborough

PETM LTD is a family-run business that was established in 2021, specializing in delivering essential training services for vocational drivers and transport audits for businesses in the heavily regulated Road haulage industry. The company focuses on two areas - training and auditing. Providing mandatory periodic Driver CPC (Certificate of Professional Competence) courses and First Aid Training in line with the latest Health and Safety Executive (HSE) requirements. In addition, we offer more than 300 CPD-accredited online and e-learning courses, covering a vast range of subjects across different sectors and areas of expertise. As an approved training centre by Pro Trainings UK and an approved consortium member of Driver CPC 4U, PETM LTD is committed to delivering high-quality training to meet industry standards Our audit services are focused on assisting businesses to improve compliance and safety. All our auditors are qualified ISO9001:2015 Lead Auditors giving you peace of mind that our audit is delivered to high standards and will be your first step to verifying your success in the transport industry. All our auditors are certified ISO 9001:2015 Lead Auditors, ensuring that our audits are conducted to the highest standards. With PETM LTD, you can have peace of mind knowing that our services provide a solid foundation for ensuring compliance and driving your success in the transport industry. The key services offered by PETM LTD include: Transport Compliance Audits: Our Operator Licence Audit is tailored to thoroughly review your management systems and documentation, ensuring full legal compliance with your operator licence undertakings and mitigating any risks to your licence. Transport consultancy and assistance: Our transport consultancy services will provide you with regular monthly visits to ensure your business stays compliant with all relevant legislation. We offer expert advice on improving compliance and achieving your goals in a legal, efficient manner. For National and International Licence holders, we provide additional support, including internal audits with detailed reports and recommendations for improvement. We also offer comprehensive assistance with your O Licence application, guiding you from start to finish. Driver CPC Courses - PETM LTD specializes in providing mandatory periodic Driver CPC courses classroom and online via ZOOM for vocational drivers. These courses ensure drivers maintain their professional competence and stay updated on relevant regulations and best practices. Classroom training can be delivered at our training venues or the customer premises on request. Recognizing the importance of flexibility, PETM LTD also offers online training sessions conducted via Zoom. This allows participants to access training remotely, making it convenient for those who cannot attend in person. First Aid Training - We can offer First Aid Training to businesses and individuals to equip them with the essential skills and knowledge required to respond effectively to emergency situations. This training is conducted in accordance with the latest HSE requirements. Training can be delivered at our training venues or the customer premises on request. Online Training - Recognizing the importance of flexibility, PETM LTD offers online e-learning training sessions that you can access on your own time. This allows participants to access training remotely, making it convenient for those who cannot attend in person and need more time to complete the training. Customised Sessions - We can provide the flexibility to conduct training sessions at customer facilities upon request. This tailored approach ensures that the training aligns with the specific needs and schedules of the clients. Our Training Venues - PETM LTD provides training sessions at its dedicated venues. These include in-person sessions held at training venues in Yaxley, Peterborough, and our new facility located at Unit 31, Lancaster Way Business Park, Ely. PETM LTD takes pride in being a trusted choice for vocational drivers and businesses seeking to meet regulatory requirements and enhance professional skills. Our comprehensive solutions include Driver CPC courses, First Aid Training, CPD-accredited e-learning courses, and auditing services, all reflecting our commitment to delivering high-quality, accessible training and compliance support.