• Professional Development
  • Medicine & Nursing
  • Arts & Crafts
  • Health & Wellbeing
  • Personal Development

414 Electrician courses

Course Description: The 18th edition course is a 3 day short course aimed at anyone involved in the design, construction and inspection and testing of electrical systems, also a nationally recognised ‘must have’ qualification for companies seeking to recruit electricians. It is intended to introduce the candidate to a working knowledge of the Wiring Regulations along with a brief overview of the Electricity at Work Regulations covering their statutory duties. Previous knowledge of the regulations is not assumed, however, a fundamental knowledge of electrical principles is assumed. Please be aware that the Wiring Regulations course is not designed to teach you every regulation in the book but it will teach you the best practices on how the reference the latest regulations as you would on the job. As such key topics currently covered on the 17th Edition will still be included. We have been delivering Wiring Regulations courses for many years and although it is mainly theory based you cannot beat real training in a real classroom. By training with other people in your class you will benefit from being able to ask relevant questions as well as finding the answers to many questions from your fellow students that you may not have even thought of. The examination is a 2 hour multiple choice, open book PC based examination with instant results. The course cost includes examination entry fees. Focus: You will study the latest standard of the IET wiring regulations, including essential subjects such as safety, selection and erection of electrical equipment. There are 8 key modules and current amendments: Section 1 – Scope, Object and FundamentalsSection 2 – DefinitionsSection 3 – Assessment of general characteristicsSection 4 – Protection for SafetySection 5 – Selection and Erection of equipmentSection 6 – Inspection & TestingSection 7 – Special Installations or locationsSection 8 – Functional Requirements This course does include the latest amendments such as: Electromagnetic Disturbance Surge Protection Medical locations Operating and Maintenance Gangways Arc Fault Detection Devices (AFDDs) Changes to fire safety requirements in chapter 422, covering the design of electrical installations in industrial, commercial and multiple-occupancy homes, as well as new information for ‘protected escape routes’ Protection against over voltages Changes across Part 7: Special Locations This classroom based course will show, teach and perfect you on how to reference and use the book for situations that you will encounter while working in the field.

ELM - 2382
Delivered In-PersonFlexible Dates
£500

Online C&G 2391-52 Training Course

By Technique Learning Solutions

Virtual Classroom – Our hi tec virtual learning suite enables you as the trainee to experience exactly the same course and level of interaction with a trainer as though you were in the same room as them. This isn’t a slideshow-based course, it’s a real tutor, in a real room taking you through all you need to know to be successful in your City and Guilds 2391 – 52. Utilising equipment and software, the theoretical part of the course will be taught over 3 days via the internet. During this time, you will be taught the theory-based elements below, also allowing ample time for questions face to face with the tutor. The instructor will go through everything that you will be expected to know about Inspection and Testing on both new and existing installations. You will be given access to our dedicated online portal to work through sample questions in your own time until the information becomes second nature to you. Your only hardware prerequisite for this part of the course is access to the internet, whether it be on a computer or a smart device. The second stage of the course will involve you attending one of our numerous training centres around the UK, for both the practical training and the examinations over a 2.5 day period. This will be booked for a later date and one of our team will be in touch with you to arrange this. During your time at one of our centres you will be taught the inspection and testing practical elements you require on individual training rigs, with equipment and testers for each and every individual person. (Our centres are ALL Covid secure and the training bays, etc are all socially distanced). This City & Guilds qualification is aimed at practicing electricians who have not carried out inspection and testing since qualifying or who require some update of training. This qualification helps you to develop the knowledge and practical skills required to professionally install and carry out initial verification and periodic inspection and testing on electrical installations. It is expected that suitable candidates have a basic knowledge and understanding of electrical science and principles and experience of electrical installation work. This is an essential skill for any electrical installer.

Online C&G 2391-52 Training Course
Delivered OnlineFlexible Dates
£500

Battery Storage (EESS)

5.0(39)

By City Training Group

Battery Storage (Electrical Energy Storage Systems)

Battery Storage (EESS)
Delivered In-PersonFlexible Dates
£299

Asbestos Awareness

By SMC Safety Solutions

Regulation 10 of the Control of Asbestos Regulations 2012 sets down requirements for asbestos awareness training. Basically, any employer involved in work where there might be a risk of disturbing asbestos, such as general building, maintenance, demolition, or refurbishment, is required by law to ensure that all affected employees are educated and trained appropriately. More recently the importance of adherence to the awareness measures has been emphasised in the Health & Safety Executive’s ‘Duty to Manage Asbestos Enforcement Initiative’ and it is now clear that non-compliance will not be tolerated. In fact, several perpetrators have already been served with improvement notices, or in the worst-case scenario a probation notice, which results in an immediate and costly halt to work. Employee training is believed to be the best way to target the estimated 1.8 million workers who are potentially at risk of life-threatening illnesses following exposure to asbestos in their day-to-day work. These people include plasterers, roofers, plumbers, electricians, demolition, maintenance men and joiners but also the less obvious workers such as computer installers, ground workers, landscapers, and fire & burglar alarm installers. Aims To raise personnel awareness of asbestos and the risks associated with it. To comply with the legal requirement of The Control of Asbestos Regulations 2012. Course Content • Introduction to asbestos - nature and origin • Types of asbestos • Properties and benefits (use of asbestos) • Health hazards • Possible locations of asbestos in buildings • Current legislation and guidance • Legal limitations on work liable to disturb asbestos • Working safely/duty holders’ responsibilities • Safe working in areas where asbestos is present • Decontamination • Emergency procedures/accidental damage/general procedures. Prerequisites None – The course is intended either as an introduction or as an update. Assessment Delegates will be required to complete a short multiple-choice test at the end of the training. Certificate This course is covered by certification to provide to your Clients, CHAS (and other SSIP) as confirmation of training undertaken and is valid for 2 years. Instructions Cost includes: course notes, certification & refreshments. Directions Location Map

Asbestos Awareness
Delivered In-Person in White Colne + more
£75

18th edition course Dover

By MJ Electrical Training

City & Guilds 18th edition course with 2382-22 final exam only £234.00. Exams available every week across the UK, same day results, quick certificate, best prices..

18th edition course Dover
Delivered Online & In-PersonFlexible Dates
£264

Safe Electrical Isolation

5.0(39)

By City Training Group

Safe Isolation of Low Voltage Electrical Installations for Plumbers & Heating Engineers

Safe Electrical Isolation
Delivered In-PersonFlexible Dates
£199.99

UKATA AA/NLO

4.9(182)

By You Can Do It .Training

Course Details Any persons carrying out non-licensed works with asbestos containing materials, as laid down in CAR 2012, Reg 3(2). This would normally include, but is not limited to, trade operatives such as demolition workers, construction workers, general maintenance staff, electricians, plumbers, gas fitters, painters and decorators, joiners, shop fitters, plasterers, roofers, heating and ventilation engineers, telecommunication engineers, computer installers, fire and burglar alarm installers, architects, building surveyors and other such professionals or any other persons likely to disturb and carry out work on asbestos containing materials as defined in CAR 2012.

UKATA AA/NLO
Delivered In-Person in Stoke on TrentFlexible Dates
£180

PAT Testing (Portable Appliance Testing) Diploma

5.0(1)

By Empower UK Employment Training

PAT Testing (Portable Appliance Testing) Diploma Unlock your potential in the field of PAT Testing with our comprehensive PAT Testing Diploma course. Master the art and science of PAT Testing. Elevate your skills and become a go-to expert in PAT Testing. Learning Outcomes: Define the fundamentals of PAT Testing. Analyse various PAT Testing methodologies. Apply PAT Testing procedures in real-world scenarios. Evaluate the effectiveness of different PAT Testing instruments. Formulate standard PAT Testing protocols. More Benefits: LIFETIME access Device Compatibility Free Workplace Management Toolkit Key Modules from PAT Testing (Portable Appliance Testing) Diploma: Electrical Principles and Terminology in PAT Testing: Understand the core electrical principles and terminology, setting a solid foundation for all your PAT Testing tasks. Inspections, Safety Checks, and Competency for PAT Testing: Perform comprehensive inspections and safety checks, honing your competency in PAT Testing. PAT Testing Procedures and User Checks: Master the step-by-step PAT Testing procedures and perform meticulous user checks to ensure the highest level of safety and compliance. Test Instruments and Equipment: Get hands-on experience with the latest PAT Testing instruments and equipment, fortifying your practical skills in PAT Testing. Standard Testing Protocols: Establish and adhere to industry-standard protocols to ensure accurate and reliable PAT Testing results.

PAT Testing (Portable Appliance Testing) Diploma
Delivered Online On Demand2 hours 48 minutes
£5

UKATA Non Licensed Operative (PM)

4.9(182)

By You Can Do It .Training

Course Details Any persons carrying out non-licensed works with asbestos containing materials, as laid down in CAR 2012, Reg 3(2). This would normally include, but is not limited to, trade operatives such as demolition workers, construction workers, general maintenance staff, electricians, plumbers, gas fitters, painters and decorators, joiners, shop fitters, plasterers, roofers, heating and ventilation engineers, telecommunication engineers, computer installers, fire and burglar alarm installers, architects, building surveyors and other such professionals or any other persons likely to disturb and carry out work on asbestos containing materials as defined in CAR 2012.

UKATA Non Licensed Operative (PM)
Delivered In-Person in Stoke on TrentFlexible Dates
£145

HVAC and PAT Testing - QLS Level 5

By Imperial Academy

Level 5 - Two Endorsed Diploma | QLS Hard Copy Certificate Included | Plus 5 CPD Courses | Lifetime Access

HVAC and PAT Testing - QLS Level 5
Delivered Online On Demand
£300