• Professional Development
  • Medicine & Nursing
  • Arts & Crafts
  • Health & Wellbeing
  • Personal Development

437 Electric courses

TIEM 10

4.7(1243)

By Technique Learning Solutions

This industrial electrical maintenance course is designed to enable candidates who have a small amount of electrical knowledge to gain recognised qualifications and skills to enable them to enter an industrial environment and work as a industrial electrician. The industrial electrical maintenance course will include a large amount of practical, enabling the candidate to install, fault find, design and wiring up control panels, using a variety of different methods. Industrial electrical maintenance course Aims The aim of the industrial electrical maintenance course is to provide solid foundations upon which the participant will be able to build and develop. Emphasis is given to providing the necessary skills, which will allow the participant to carry out routine electrical tasks. It is also made clear that a participant needs to identify and know their own limitations, allowing tasks to be carried out in a safe manner, not giving rise to danger.

TIEM 10
Delivered in Clay Cross or Online + more
£500

TIEM 13

4.7(1243)

By Technique Learning Solutions

This industrial electrical maintenance course is designed to enable candidates who have a small amount of electrical knowledge to gain recognised qualifications and skills to enable them to enter an industrial environment and work as a industrial electrician. The industrial electrical maintenance course will include a large amount of practical, enabling the candidate to install, fault find, design and wiring up control panels, using a variety of different methods.

TIEM 13
Delivered in Clay Cross or Online + more
£500

TIEM 15

4.7(1243)

By Technique Learning Solutions

This industrial electrical maintenance course is designed to enable candidates who have a small amount of electrical knowledge to gain recognised qualifications and skills to enable them to enter an industrial environment and work as a industrial electrician. The industrial electrical maintenance course will include a large amount of practical, enabling the candidate to install, fault find, design and wiring up control panels, using a variety of different methods.

TIEM 15
Delivered in Clay Cross or Online + more
£500

TIEM 20

4.7(1243)

By Technique Learning Solutions

This industrial electrical maintenance course is designed to enable candidates who have a small amount of electrical knowledge to gain recognised qualifications and skills to enable them to enter an industrial environment and work as a industrial electrician. The industrial electrical maintenance course will include a large amount of practical, enabling the candidate to install, fault find, design and wiring up control panels, using a variety of different methods.

TIEM 20
Delivered in Clay Cross or Online + more
£500

The Impact of Electric Vehicles (EVs) on the Grid

By EnergyEdge - Training for a Sustainable Energy Future

About this Virtual Instructor Led Training (VILT)  Electrification of the transportation sector will impact the power system in several ways. Besides the additional load, local impact on the grid needs to be managed by the grid operators. Simultaneously charging of many electric vehicles (EVs) might exceed the limits in specific locations. On the other hand, EVs can provide flexibility and other ancillary services that will help grid operators. This 3 half-day VILT course will provide a complete overview of integrating electric vehicles (EVs) into the power grid. It will cover the whole value chain from grid operations to the car battery. This includes the control room, possible grid reinforcement, demand side management and power electronics. This course will demonstrate the impact on the grid and solutions for a safe & cost-effective grid plan and operation, with examples of successful integration of EVs. The course will also provide vital knowledge about technology used for EVs such as power electronics, demand side management, communication and batteries. In this context, the focus will be on power electronics as it has the highest impact on the grid. The grid planning tool, pandapower, is introduced as an open source tool for power system modelling. The set-up of the training course allows for discussion and questions. Questions can be formulated by the participants upfront or during the training. This course is delivered in partnership with Fraunhofer IEE. Training Objectives At the end of this course, the participants will: Understand the charging options for EVs and its impact on the grid and batteries Identify system services for EVs with regards to voltage quality at the point of common coupling Discover what are the 'grid friendly' and grid supporting functions in EVs Uncover the different applications, standards and data researched on EVs Examine the application of a grid planning tool (pandapower) for power system modelling Be able to develop code snippets with pandapower Apply and execute a code example for power system modelling with pandapower Target Audience EV and grid project developers and administrators Power grid operators and planners EPC organisations involved in grid development EV/ battery manufacturers and designers EV transport planners and designers Government regulators and policy makers Training Methods The VILT will be delivered online in 3 half-day sessions comprising 4 hours per day, with 2 x 10 minutes breaks per day, including time for lectures, discussion, quizzes and short interactive exercises. Additionally, some self-study will be requested. Participants are invited but not obliged to bring a short presentation (10 mins max) on a practical problem they encountered in their work. This will then be explained and discussed during the VILT. A short test or quiz will be held at the end of every session/day. Trainer Our first course expert is Head of Department Converters and Electrical Drive Systems at Fraunhofer IEE and Professor for Electromobility and Electrical Infrastructure at Bonn-Rhein-Sieg University of Applied Sciences. He received his engineering degree in automation in 2008 by the THM Technische Hochschule Mittelhessen (FH Giessen-Friedberg). Afterwards he studied power engineering at University of Kassel and received his diploma certificate in 2010. In 2016 he received the Ph.D. (Dr.-Ing.) from the University of Hannover. The title of his dissertation is Optimized multifunctional bi-directional charger for electric vehicles. He has been a researcher at the Fraunhofer IEE in Kassel since 2010 and deals with power converters for electric vehicles, photovoltaics and wind energy. His current research interests include the bidirectional inductive power transfer, battery charger and inverter as well as new power electronic components such as SiC MOSFETs and chokes. Additionally, our key expert is Chairman of the IEEE Joint IAS/PELS/IES German Chapter and a member of the International Scientific Committee of the EPE Association. Our second course expert is deputy head of energy storage department at Fraunhofer IEE. Prior to this he was the Director of Grid Integration department at SMA Solar Technology AG, one of the world's largest manufacturers of PV power converters. Before joining SMA, our course expert was manager of the Front Office System Planning at Amprion GmbH (formerly RWE TSO), one of the four German transmission system operators. He holds a degree of electrical engineering of the University of Kassel, Germany. In 2003 he finished his Ph.D. (Dr.-Ing.) on the topic of wind power forecasting at the 'Institute of Solar Energy Supply Technology' (now Fraunhofer IEE) in Kassel. In 2004 he started his career at RWE TSO with main focus on wind power integration and congestion management. Our course expert is chairman of the IEC SC 8A 'Grid Integration of Large-capacity Renewable Energy (RE) Generation' and has published several papers about grid integration of renewable energy source and forecasting systems on books, magazines, international conferences and workshops. Our third course expert is Research Associate at Fraunhofer IEE. He is actively working on different projects related to the integration of electric vehicle charging into the electric distribution grid. The focus of this work concerns time series based simulations for grid planning and operation in order to investigate the effect of a future rollout of electric vehicles and charging infrastructure on economics e.g. costs for grid reinforcement. He completed his master degree (MSc.) in Business Administration and Engineering: Electrical Power Engineering at RWTH Aachen University, Germany. Our trainers are experts from Fraunhofer Institute for Energy Economics and Energy System Technology (Fraunhofer, IEE), Germany. The Fraunhofer IEE researches for the national and international transformation of energy supply systems POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information about post training coaching support and fees applicable for this. Accreditions And Affliations

The Impact of Electric Vehicles (EVs) on the Grid
Delivered in Internationally or OnlineFlexible Dates
£2,196 to £2,554

The Ultimate Guide to Event Planning - 1 Day Workshop in Buxton

By Mangates

Event Planning 1 Day Training in Buxton

The Ultimate Guide to Event Planning - 1 Day Workshop in Buxton
Delivered In-Person + more
£595 to £795

C01M02 - FD&FA Design principles - BS 5839-1 (classroom)

5.0(4)

By Ember Compliance

This course will develop knowledge from the FD&FA foundation BS 5839-1 module and/or industry experience and apply this to the design of FD&FA systems.

C01M02 - FD&FA Design principles - BS 5839-1 (classroom)
Delivered In-Person in Broxburn + more
£230

Level 2 Asbestos Awareness

By Pathways Training

Who is this course for? This basic working with Asbestos safety training course is specifically designed for anyone who may be at risk from coming into contact with asbestos during the course of their work and which involves them using all necessary precautions and equipment to avoid working with asbestos containing materials [ACM]. IMPORTANT: This course does not train you to carry out any unlicensed, unlicensed notifiable work or licensed work on asbestos. You will need specific training for this. This course can also benefit the supervisor/manager responsible for those working in the construction and maintenance industry and looking for a basic understanding to better appreciate when to “stop the job” if suspected ACM’s are found. What are the objectives of the course? The aim of this course is to keep it simple and real, whilst all the key subject areas are covered of how to avoid working with asbestos. Course Content Different types of Asbestos Asbestos related diseases Asbestos product identification Where Asbestos can be found in premises Application legislation & Asbestos management The Asbestos register How to avoid exposure to ACMs Emergency procedures following exposure to ACMs

Level 2 Asbestos Awareness
Delivered In-Person in Hull + more
£50

EINTAC Vehicle Fire Blanket Training

By EINTAC Ltd

This training course has been designed to give all staff the knowledge of how to safely use a Vehicle Fire Blanket in the event of a fire. Those who attend the course will be taught how to safely deploy the blanket, remove the blanket and clean up and re-pack the blanket for its next use. As part of the training, the attendees will also be shown and taught the best practices for handling the fire blanket including the necessary steps of a periodic check of the blanket. Another key aspect to the Vehicle Fire Blanket Training Course is educating people on the possible fire situations with electric and hybrid vehicles and how to identify potential fire issues and risks. The course will end with a survey of the customers site to identify the best location for the fire blanket(s) to be located and determine any signage and additional equipment which may be required.

EINTAC Vehicle Fire Blanket Training
Delivered In-PersonFlexible Dates
£400

The Ultimate Guide to Event Planning - 1 Day Workshop in Caernarfon

By Mangates

Event Planning 1 Day Training in Caernarfon

The Ultimate Guide to Event Planning - 1 Day Workshop in Caernarfon
Delivered In-Person + more
£595 to £795
1...45678...44