Electric courses in Cardiff

This EV charging course is intended to provide expert guidance to learners wishing to gain knowledge and understanding on Electric Vehicle charging equipment installation. This 2 day course provides expert guidance on EV charging equipment installation, an important emerging area which is not covered in detail by the current edition of the Wiring Regulations (BS 7671) or the IET’s Guidance Notes. Aimed at experienced electricians interested in understanding a wide range of equipment and systems available, this course applies to the specialised installation requirements of electric vehicle charging equipment in domestic dwellings, on-street locations, commercial and industrial premises. This training course provides detailed guidance and recommendations on all aspects of the installation of Electric Vehicle Charging Equipment from the origin of the electrical supply, through distribution and final circuits, installation of the charging equipment itself to the cable between the charging equipment and vehicle’s electrical inlet. Also included are related issues of site layout and planning and subsequent inspection, testing, certification and maintenance of installations. Also Covering: How EV charging works How to select the correct EV Charging Point Solution for the customers needs. Technical requirements of installing & the use of different earthing arrangements (TN-C-S/TT systems) Planning requirements, labelling & risk assessments How to carry out surveys & Pre Installation considerations Meeting the requirements of BS7671 Awareness of the IET code of practice for Electrical Vehicle Charging Equipment & Installation. Plus much more Why take this EV charging course? Currently there is an increasing demand for new electric vehicle charging points but too few installers to roll them out. This is already a booming market which is due to get much bigger in the near future. The number of public charging connectors and locations has increased by 38% in the past 12 months and is expected to continue at that rate for years to come. Add this important service to future proof your knowledge to allow extra inspection & testing plus new installation work with this electric vehicle charging course. We have a variety of charging units and simulated installs which means it is just as working on a real installation. Making this installers course real value for money.

This qualification aims to provide expert guidance to learners wishing to gain knowledge and understanding on Electric Vehicle charging equipment installation. This 2 day course provides expert guidance on EV charging equipment installation, an important emerging area which is not covered in detail by the current edition of the Wiring Regulations (BS 7671) or the IET’s Guidance Notes. Aimed at experienced electricians interested in understanding a wide range of equipment and systems available, this course applies to the specialised installation requirements of electric vehicle charging equipment in domestic dwellings, on-street locations, commercial and industrial premises. The course provides detailed guidance and recommendations on all aspects of the installation of Electric Vehicle Charging Equipment from the origin of the electrical supply, through distribution and final circuits, installation of the charging equipment itself to the cable between the charging equipment and vehicle’s electrical inlet. Also included are related issues of site layout and planning and subsequent inspection, testing, certification and maintenance of installations. Why take this course? Currently there is an increasing demand for new electric vehicle charging points but too few installers to roll them out. This is already a booming market which is due to get much bigger in the near future. The number of public charging connectors and locations has increased by 38% in the past 12 months and is expected to continue at that rate for years to come. Entry Requirements There are no formal entry requirements for this qualification, however we do expect you to meet the following requirements: Minimum age 18 years old (mandatory) Must be able to demonstrate the following competencies Be able to correctly install and terminate: pvc/pvc cable (twin and earth) Steel Wire armoured cable (swa) Be able to carry out an initial verification (inspection & testing) on an electrical installation and complete the necessary paperwork. Please Note: These competencies are required for the assessment and are not taught as part of the course. It is also recommended that you are up to date with your wiring regulations.

Description Fundamentals of Electric Vehicles  Introducing the Fundamentals of Electric Vehicles Diploma, a comprehensive online course designed to equip learners with essential knowledge and skills in the rapidly growing field of electric vehicles (EVs). This course provides a thorough understanding of the critical components, systems, and technologies that make electric vehicles an increasingly attractive and sustainable transportation option. The Fundamentals of Electric Vehicles Diploma is tailored for individuals seeking a solid foundation in the various aspects of electric vehicle technology. Whether an automotive enthusiast, an engineering professional, or someone interested in pursuing a career in the EV industry, this course offers valuable insights and practical knowledge to help stay ahead in this dynamic and evolving sector. Starting with an Introduction to Electric Vehicles, learners will gain an overview of the history, types, and benefits of electric vehicles, as well as the key components and subsystems that enable their operation. The course will also delve into the Battery Technology for Electric Vehicles, providing an in-depth understanding of the different types of batteries, their chemistry, and the factors influencing their performance and lifespan. Electric Motors for Electric Vehicles is another essential topic covered in the Fundamentals of Electric Vehicles Diploma. Participants will explore various electric motor types, their working principles, and their applications in EVs. The course also covers Power Electronics for Electric Vehicles, addressing the critical role of power electronics in controlling and converting electrical energy in electric vehicle systems. A robust Charging Infrastructure for EVs is fundamental to their widespread adoption. This course thoroughly examines different charging technologies, their compatibility with various electric vehicles, and the challenges and opportunities in developing a comprehensive EV charging network. Furthermore, the course delves into Energy Management in Electric Vehicles, discussing strategies to optimise energy consumption and extend the driving range of EVs. The Fundamentals of Electric Vehicles Diploma also covers Thermal Management in Electric Vehicles, a crucial aspect of ensuring battery and motor performance, reliability, and longevity. Participants will learn about various thermal management techniques and their applications in electric vehicles. Vehicle Dynamics and Control in Electric Vehicles is another key topic, focusing on the unique challenges and opportunities in ensuring stability, handling, and ride comfort in electric vehicles. Design and Integration of Electric Drivetrains is an important aspect of developing efficient and high-performance electric vehicles. The course provides insights into the design and integration of drivetrain components, as well as their influence on overall vehicle performance. Finally, the Fundamentals of Electric Vehicles Diploma addresses Future Trends and Developments in Electric Vehicles, offering a forward-looking perspective on emerging technologies, market trends, and potential advancements in the EV industry. By completing the Fundamentals of Electric Vehicles Diploma, learners will have acquired a well-rounded understanding of electric vehicle technology, enabling them to contribute effectively to the EV industry or pursue further studies in this fascinating domain. Enrol today to start your journey towards becoming an expert in electric vehicle technology and help shape the future of sustainable transportation. What you will learn   1:Introduction to Electric Vehicles  2:Battery Technology for Electric Vehicles  3: Electric Motors for Electric Vehicles  4:Power Electronics for Electric Vehicles  5:Charging Infrastructure for EV  6:Energy Management in Electric Vehicles  7:Thermal Management in Electric Vehicles  8:Vehicle Dynamics and Control in Electric Vehicles  9:Design and Integration of Electric Drivetrains  10:Future Trends and Developments in Electric Vehicles  Course Outcomes After completing the course, you will receive a diploma certificate and an academic transcript from Elearn college. Assessment Each unit concludes with a multiple-choice examination. This exercise will help you recall the major aspects covered in the unit and help you ensure that you have not missed anything important in the unit. The results are readily available, which will help you see your mistakes and look at the topic once again. If the result is satisfactory, it is a green light for you to proceed to the next chapter. Accreditation Elearn College is a registered Ed-tech company under the UK Register of Learning( Ref No:10062668). After completing a course, you will be able to download the certificate and the transcript of the course from the website. For the learners who require a hard copy of the certificate and transcript, we will post it for them for an additional charge.

Gain the skills and credentials to kickstart a successful career and learn from the experts with this step-by-step

Course Overview Hybrid electric vehicles are replacing regular fuel-run vehicles. As they are more convenient and environmentally friendly, the hybrid vehicle industry is growing fast. The Hybrid and Electric Vehicles Engineering Course is here to teach you the basics of HEVs and help you become a part of this expanding sector. In the Hybrid and Electric Vehicles Engineering Course, you will understand the basic principles of hybrid electric vehicles. You will identify the motives behind the growth of this industry. The highly informative modules will educate you on different hybrid vehicles. The course will discuss the degree of hybridization in detail. You will learn about engine, motor, motor efficiency, generator and power split device and other core components of HEVs. You will receive a clear understanding of the regenerative system from the lessons. The Hybrid and Electric Vehicles Engineering Course will enrich your knowledge about HEVs and equip you with the ability to pursue a career in this industry. Join the course and open yourself to new possibilities. Learning Outcomes Understand the reasons behind the rise of hybrid electric vehicles Familiarize yourself with the structure of different hybrid electric vehicles Enrich your knowledge about the degree of hybridization Learn about the core elements of HEVs Deepen your understanding of the regenerative system Who is this course for? This Hybrid and Electric Vehicles Engineering Course is for automobile enthusiasts.  Entry Requirement This course is available to all learners, of all academic backgrounds. Learners should be aged 16 or over to undertake the qualification. Good understanding of English language, numeracy and ICT are required to attend this course. Certification After you have successfully completed the course, you will be able to obtain an Accredited Certificate of Achievement. You can however also obtain a Course Completion Certificate following the course completion without sitting for the test. Certificates can be obtained either in hardcopy at the cost of £39 or in PDF format at the cost of £24. PDF certificate's turnaround time is 24 hours, and for the hardcopy certificate, it is 3-9 working days. Why choose us? Affordable, engaging & high-quality e-learning study materials; Tutorial videos/materials from the industry-leading experts; Study in a user-friendly, advanced online learning platform; Efficient exam systems for the assessment and instant result; The UK & internationally recognized accredited qualification; Access to course content on mobile, tablet or desktop from anywhere anytime; The benefit of career advancement opportunities; 24/7 student support via email. Career Path The Hybrid and Electric Vehicles Engineering Course is a useful qualification to possess and would be beneficial for any related profession or industry such as: Automobile Engineer Introduction Introduction 00:02:00 Key Motivations for HEVs Rise 00:05:00 Types of Hybrid Electric Vehicles What is HEV & world famous models 00:02:00 Architecture of Hybrid Electric vehicles 00:08:00 Parallel Hybrid Vehicles 00:06:00 Other types of Architecture 00:07:00 Degree of Hybridisation Modes of Operation 00:10:00 Components of HEVs Engine & Motor 00:03:00 Motor Efficiency 00:04:00 Generator & Power Split Device 00:03:00 Battery storage systems 00:06:00 Regenerative Systems Fundamentals of Regenerative Braking 00:06:00 Certificate and Transcript Order Your Certificates and Transcripts 00:00:00

The 'Training Diploma in Electric and Hybrid Vehicles Engineering' provides an introduction to electric and hybrid vehicles, covering various types and degrees of hybridization. It focuses on the components of Hybrid Electric Vehicles (HEVs) and regenerative systems. Learning Outcomes: Understand the fundamental concepts of electric and hybrid vehicles. Differentiate between various types of hybrid electric vehicles and their degree of hybridization. Identify and describe the key components of Hybrid Electric Vehicles (HEVs). Gain knowledge about regenerative systems used in electric and hybrid vehicles. Acquire insights into the engineering principles behind electric and hybrid vehicle technologies. Why buy this Training Diploma in Electric and Hybrid Vehicles Engineering? Unlimited access to the course for forever Digital Certificate, Transcript, student ID all included in the price Absolutely no hidden fees Directly receive CPD accredited qualifications after course completion Receive one to one assistance on every weekday from professionals Immediately receive the PDF certificate after passing Receive the original copies of your certificate and transcript on the next working day Easily learn the skills and knowledge from the comfort of your home Certification After studying the course materials of the Training Diploma in Electric and Hybrid Vehicles Engineering there will be a written assignment test which you can take either during or at the end of the course. After successfully passing the test you will be able to claim the pdf certificate for £5.99. Original Hard Copy certificates need to be ordered at an additional cost of £9.60. Who is this course for? This Training Diploma in Electric and Hybrid Vehicles Engineering course is ideal for Students Recent graduates Job Seekers Anyone interested in this topic People already working in the relevant fields and want to polish their knowledge and skill. Prerequisites This Training Diploma in Electric and Hybrid Vehicles Engineering does not require you to have any prior qualifications or experience. You can just enrol and start learning.This Training Diploma in Electric and Hybrid Vehicles Engineering was made by professionals and it is compatible with all PC's, Mac's, tablets and smartphones. You will be able to access the course from anywhere at any time as long as you have a good enough internet connection. Career path As this course comes with multiple courses included as bonus, you will be able to pursue multiple occupations. This Training Diploma in Electric and Hybrid Vehicles Engineering is a great way for you to gain multiple skills from the comfort of your home. Course Curriculum Introduction Introduction 00:02:00 Key Motivations for HEVs Rise 00:05:00 Types of Hybrid Electric Vehicles What is HEV & world famous models 00:02:00 Architecture of Hybrid Electric vehicles 00:08:00 Parallel Hybrid Vehicles 00:06:00 Other types of Architecture 00:07:00 Degree of Hybridisation Modes of Operation 00:10:00 Components of HEVs Engine & Motor 00:03:00 Motor Efficiency 00:04:00 Generator & Power Split Device 00:03:00 Battery storage systems 00:06:00 Regenerative Systems Fundamentals of Regenerative Braking 00:06:00 Assignment Assignment - Training Diploma in Electric and Hybrid Vehicles Engineering 00:00:00

What is the AM2 assessment? The AM2 assessment is an industry recognised trade test designed to evidence that candidates have gained all relevant and safety-critical competencies during their training process. It provides a single standard that has been agreed upon by employers within the electrical industry, giving a reliable and trusted guarantee of safe, high-quality skills for the electrotechnical industry. Who is this for? This is aimed at apprentices who are coming to the end of their training for the JIB apprentice training scheme and the Installation of modern apprenticeships. This course is also for experienced electricians, specifically those who are looking at taking the experienced worker route (AM2E.) There are a range of assessments for candidates based on their level: AM2 – This is for candidates undertaking the JIB mature candidate assessments and those following the level three NVQ who isn’t an apprentice. AM2S – This is for electrotechnical apprentices who are training against the apprenticeship standard AM2E – This is for experienced workers who are completing the experienced worker assessment. Please note: this can only be taken once you have gained the experienced worker qualification, proof must be provided before booking the AM2 assessment. What does this assessment consist of? Overall, the AM2 is an in-depth assessment carrying out tasks to show what you have learnt on your training. It is a practical assessment with five sections (six for AM2E and AM2S) and a short online component. Candidates will be expected to install, connect, terminate, inspect, test, commission and diagnose faults, following installation specifications provided and any relevant statutory and non-statutory regulations on: A three-phase distribution board and subcircuit A central heating/sustainable energy system Lighting and power circuits A data cabling system A safety services circuit and device Installation of containment systems (AM2E and AM2S only) Candidates will complete timed tasks in equipped areas that contain typical electrical installation wiring systems – all work must comply with BS7671 Wiring Regulations, industry best practice, and meet the requirements of relevant health and safety legislation. The assessment will be carried out in strict exam conditions across 2.5 days. Do I need an AM2 certificate to work as an electrician? Apprentices must pass their AM2 test in their final year to complete their apprenticeship. Also, if the apprenticeship standard is not being followed, an AM2 certificate and a level three NVQ is required to gain a gold card. If you are already working as an electrician, you will not need an AM2 certificate. If you are training to be an electrician and are registering for your NVQ level three in Electrical Installation or Maintenance, the electrotechnical diploma now includes the AM2. The AM2 certification is an industry recognised and something that many employers will actively seek when hiring new staff. It can also be attractive to potential customers.

Learn how to test portable electrical appliances with a qualification in Electrical Equipment Maintenance and Testing aimed at new starters to the testing of portable electrical equipment with minimal electrical knowledge. This qualification is aimed at those with responsibilities for the maintenance of electrical equipment and for those undertaking practical inspection and testing of electrical equipment. It allows those with the responsibility for the testing and inspection of electrical equipment to gain a qualification suitable to their job role. The qualification allows candidates to learn, develop and practise the skills required to inspect and test items of electrical equipment in line with the latest edition of the Code of Practice for In-Service Inspection and Testing of Electrical Equipment. Learners completing the qualification will have the ability to carry out mandatory responsibilities within the workplace depending on their prior electrical knowledge This level will suit you if you are looking to become involved in, the inspection and testing of electrical equipment. To successfully complete the qualification learners will have to sit an Evolve on-line test comprising of a 50 MCQ and a practical assignment. The practical consists of 3 tasks which are: Task 1 is inspect and test Class I equipment, Task 2 is inspect and test Class II equipment (this will be either unearthed metal or without unearthed metal or Class II FE – Learners will not need to do all 3 of these, they only need to do one type), Task 3 is completing the record forms

Course Description: The 18th edition course is a 3 day short course aimed at anyone involved in the design, construction and inspection and testing of electrical systems, also a nationally recognised ‘must have’ qualification for companies seeking to recruit electricians. It is intended to introduce the candidate to a working knowledge of the Wiring Regulations along with a brief overview of the Electricity at Work Regulations covering their statutory duties. Previous knowledge of the regulations is not assumed, however, a fundamental knowledge of electrical principles is assumed. Please be aware that the Wiring Regulations course is not designed to teach you every regulation in the book but it will teach you the best practices on how the reference the latest regulations as you would on the job. As such key topics currently covered on the 17th Edition will still be included. We have been delivering Wiring Regulations courses for many years and although it is mainly theory based you cannot beat real training in a real classroom. By training with other people in your class you will benefit from being able to ask relevant questions as well as finding the answers to many questions from your fellow students that you may not have even thought of. The examination is a 2 hour multiple choice, open book PC based examination with instant results. The course cost includes examination entry fees. Focus: You will study the latest standard of the IET wiring regulations, including essential subjects such as safety, selection and erection of electrical equipment. There are 8 key modules and current amendments: Section 1 – Scope, Object and FundamentalsSection 2 – DefinitionsSection 3 – Assessment of general characteristicsSection 4 – Protection for SafetySection 5 – Selection and Erection of equipmentSection 6 – Inspection & TestingSection 7 – Special Installations or locationsSection 8 – Functional Requirements This course does include the latest amendments such as: Electromagnetic Disturbance Surge Protection Medical locations Operating and Maintenance Gangways Arc Fault Detection Devices (AFDDs) Changes to fire safety requirements in chapter 422, covering the design of electrical installations in industrial, commercial and multiple-occupancy homes, as well as new information for ‘protected escape routes’ Protection against over voltages Changes across Part 7: Special Locations This classroom based course will show, teach and perfect you on how to reference and use the book for situations that you will encounter while working in the field.

Our intensive 10, 15 or 20 day Total Air Conditioning and Refrigeration training courses have been structured to meet the ever increasing demands on industry to meet safety, environmental and legal requirements regarding installation, commissioning, service and maintenance of both refrigeration and air conditioning systems including the electrical aspects of installation dependent upon course selection. The first 10 days of the Total Air Conditioning and Refrigeration training course are mechanical only, the following 5 or 10 days are the electrical aspects, depending on which route you need to go down. The Total Air Conditioning and Refrigeration training courses are accredited with the City & Guilds 2079, BESA Pipework and Brazing – (commercial), along with an EAL Unit* – Maintenance of Refrigeration Systems from the EAL Certificate in Engineering Technology (QCF) qualification. (*Practical elements will be covered during the course with a Project booklet to be completed by the student with an element of self-study after the course completion for us to claim the Unit certification from EAL). Our Total Air Conditioning and Refrigeration training courses are designed to be as practical as they possibly can be, with workshop time taking more than 70% of the course. During the Total Air Conditioning and Refrigeration training course, you will, install, repair, fault find, adapt and commission on a variety of different equipment, because we believe the way to learn is to do it!! With ALL our courses we offer unbiased technical support and access to a wealth of knowledge and information upon completion. Once you’ve completed your course with Technique, you can be assured that our service doesn’t end there…