5100 Development courses

Professional Management is crucial to your company's success. In fact, managers can have the single largest impact on your organisation's productivity and overall profitability, with more influence over employee morale and performance than anyone else.

Elevate your knowledge in gas lift design optimization with EnergyEdge's classroom training. Join us to stay ahead in the industry!

Face to Face training customised and bespoke. Live online or Face to Face.

This is an intensive installation, commissioning, and maintenance course for emergency lighting systems. It is a follow on from our Foundation course on emergency lighting where the requirements of installation, commissioning, and maintenance are considered.

Course Information Join our comprehensive three-day training programme tailored for individuals seeking a foundational grasp of computerised system validation. This course equips participants with essential knowledge to effectively validate systems within their respective organisations for utilisation in GxP (GLP, GCP, GMP, GDP, and GPvP) environments. Attendees will also gain proficiency in auditing validated computerised systems, ensuring compliance with pertinent GxP regulations. Commencing with an overview of regulatory prerequisites and the system life cycle, the course transitions into practical aspects, centered around validating computerised systems and conducting subsequent audits. Engage in a dynamic blend of presentations, interactive discussions, and hands-on practical workshops throughout the course. This course will provide delegates with an understanding of the computerised system validation process, including: Definition of end user requirements Risk management, including supplier assessment and techniques for audit planning Validation planning and reporting Linking system development with good business practices Formal testing and qualification Understanding of data integrity and security issues How to assess system validation documentation to verify compliance. Is this course for you? IT professionals new to implementing computerised systems into regulated environments Quality professionals who monitor or audit computerised systems System owners, end users, tester and project staff. Tutors Tutors will be comprised of (click the photos for biographies): Nichola Stevens Director and Principal Consultant, Nuncius Compliance Solutions Ltd Barry McManus Consultancy Partner, Empowerment Quality Engineering Ltd Programme Please note timings may be subject to alteration. Day 1 09:00 Welcome, Introduction and Course Objectives 09:45 Why Validate? Regulations and Guidance on Computerised System Validation Overview of the regulations and guidance applicable to CSV and their key expectations. 10:30 Break 10:45 The System Lifecycle The concept of the SLC and the key outputs from it. 12:00 Lunch 12:45 The Validation Process The approach to validation for different system types and a look at some of the key deliverables. 14:00 Project Introduction 14:15 Exercise 1 - User Requirements Capturing, agreeing and documenting the user requirements for a system. 15:15 Break 15:30 Exercise 1 - Feedback 16:00 Risk Management Risk management and its impact on validation. Identifying the deliverables required. Then group discussion on risk assessment for three systems. 17:00 Questions and Answers Answers to any outstanding questions from Day 1. 17:15 Close of Day Day 2 09:00 Supplier Assessment The different approaches to supplier assessment and the things to be considered when assessing a supplier. 10:15 Exercise 2 - Supplier Assessment Planning a vendor audit with a focus on the key validation deliverables. 11:00 Break 11:15 Exercise 2 - Feedback 11:45 Test Overview and Test Planning The different test phases, the purpose of each test phase and things to be considered when planning and reporting testing. 12:45 Lunch 13:30 Test Overview and Test Planning Continued. 14:15 Test Script Design, Execution and Review What a good test script looks like and the key things to consider when creating, executing and reviewing a test script. 15:30 Break 15:45 Exercise 3 - Creating a Test Script Create a test script based on user requirements created on Day 1. 17:15 Close of Day Day 3 09:00 Exercise 3 Feedback 09:30 Infrastructure Configuration and Qualification 10:30 Break 10:45 Validation Reporting Overview of the Validation Report and what should be included in it. 11:15 Maintaining the Validated State The procedures and records needed to ensure the system remains fit for purpose. 12:30 Lunch 13:15 Change Control Key concepts related to making changes to validated systems. 14:00 Data Integrity and Security How can we assure the integrity and security of our data. 15:15 Break 15:30 Course Objectives Summary and Panel Discussion A round up of key learning from the course. 17:00 Close of Course Extra Information Face-to-face course Course Material Course material will be available in PDF format for delegates attending this course. The advantages of this include: Ability for delegates to keep material on a mobile device Ability to review material at any time pre and post course Environmental benefits – less paper being used per course. The material will be emailed in advance of the course and RQA will not be providing any printed copies of the course notes during the training itself. Delegates wishing to have a hard copy of the notes should print these in advance to bring with them. Alternatively delegates are welcome to bring along their own portable devices to view the material during the training sessions. Remote course Course Material This course will be run completely online. You will receive an email with a link to our online system, which will house your licensed course materials and access to the remote event. Please note this course will run in UK timezone. The advantages of this include: Ability for delegates to keep material on a mobile device Ability to review material at any time pre and post course Environmental benefits – less paper being used per course Access to an online course group to enhance networking. You will need a stable internet connection, a microphone and a webcam. CPD Points 19 Points Development Level Develop

5-day practical leather bag pattern cutting and design course with leather crafting skillsLearn leather bag design and creation processes with an introduction to leather crafting. Design bags in 3DSee 1-day Pattern Cutting (The Basics) course, here. Join us in our Oxfordshire Workshop (UK) for a week of learning and making. Learn directly from Leathersmith and London College of Fashion Lecturer, Georgie Tym as she guides you through designing your own patterns from scratch to create a whole catalogue of 3D shapes for bags and accessories along with a basic introduction to leather crafting skills. Who is this course for? This 5-day practical bag pattern cutting and introduction to leather craft course is ideal for all experience levels, from beginners to confident makers. A perfect introduction into the pattern cutting skills and leather skills you’ll need to create and design your own bag patterns and leather designs. Are you looking to: Start your own bag brand? Design your own bags? Understand the bag making process? Create bags at home to complete your own handmade wardrobe? Satisfy a general interest into the skills and techniques required to make your own bags? Develop a foundation in leather crafting skillsIf you've answered yes to any of the above, then this is the course for you. What to expect Join Georgie to learn the basics of pattern cutting for bags with an introduction to leather craft. The course includes a foundation knowledge through to more complex cutting techniques. Looking at 3D shapes and examples from which you can create multiple shapes and details. Learn all the essential skills you will need to begin your leather crafting journey. This is the course for you if you’re ready to turn those bags you’ve been dreaming up and designing into 3-Dimensional tangible reality. Within the course, you’ll also be introduced to techniques and materials suitable for accessories, including sewing on an industrial sewing machine and stitching leather by hand. Upon completing the pattern cutting and introduction to leather course you will take away the knowledge to bring your designs to life. Complete with a set of paper/ fabric mock-ups which can be kept as your reference sample set and leather craft samples you will have your very own library of resources to inspire and generate future ideas. The course covers: Pattern types and shapes suitable for each construction type Patterns for details and functionality features Professional methods and best practice Basic pattern cutting techniques Pattern design/ development and sequences Hands on involvement and demonstrations. Hand stitching leather and other materials Machine stitching leather and other materials Leather tools and machinery Seam types used in bag and leather constructions Leather and other materials discussions You will receive a certificate upon completion of the course.  What's included in the price? There are no additional costs. Basic materials will be included.The course runs from 10am – 3.30pm Monday - Friday. There will be a tea/ coffee breaks throughout and an hour break at lunch. Please note lunch is not provided.The course will be run from the HOME STUDIO of Hands Of Tym in Banbury, Oxfordshire, OX16 9DHParking available on the drive or on the street with easy access via the M40. Banbury train station is a steep 30 min walk. Trains run from both London Marylebone and Birmingham to Banbury in 50mins. Also well connected to Reading, Oxford, Leamington Spa to name a few.Maximum class size is 5 Cancellation policy Easy - Cancellation and a full refund can be obtained up to 2 weeks before the course starts About Georgie at Hands of Tym During training at Cordwainers, London College of Fashion in 2010 I learnt how to design, make and manufacture bags professionally. Following a varied career in Accessories design and development across many roles and international brands I set up Hands of Tym in 2016. The courses I offer are suitable for all, from experienced to total novice. Come along to learn something new, and design and make your own leather bag in a day.

Practical Creative Pattern and Gament Making Course, for teachers of GCSE D&T and Art & Design Textiles.

EnergyEdge course offers in-depth training on hydraulic fracturing. Learn about design, execution, and post-frac analysis. Enroll today!

Overview Overview This course is designed to develop skills and gain more knowledge of Change Management. For people who want to transform their skills and career and explore every opportunity, this course well suits their needs. It is very important to understand Change Management and adopt the changes within the organisation and work culture. It will be impossible to grow or even to improve ourselves without any changes. Changes happen to take place either in a positive nature or in negative nature. No matter how it happens to appear, we need skills to respond to the changes and respond accordingly.  We need to enhance our skills on a daily basis in this changing environment to handle what we encounter. It is observed that Change is very important for growth, diversity and success. Every business needs to go through the changing process to adapt the new things and walk with the new developments. Thus, as a professional, we also are in need to continually change to maintain and improve our competencies and skills and to achieve our targeted goals. We need to be extroverted with the environment to understand what is happening, where, when and what change needs to be brought. 

Completion of the ATP-CTP course is a prerequisite for taking the written knowledge test for the ATP certificate, and it is often a requirement for employment with airlines and other commercial aviation operators.