160 Courses delivered Online

Food Hygiene and Safety Level 3 with HACCP included To guarantee the safety and quality of food items, obtaining a Food Hygiene and Safety Level 3 certification is essential. This certification includes Hazard Analysis and Critical Control Points (HACCP). With the strict rules around food safetyin the UK, this certificate is crucial. Those who hold a Level 3 certification are qualified to establish and oversee strong food safety systems, which lowers the possibility of contamination and guarantees legal compliance. Professionals holding this Food Hygiene and Safety credential are still in high demand, particularly in the food manufacturing, catering, and hospitality industries. Opportunities for employment include positions as HACCP coordinators, quality assurance managers, and inspectors of food safety. Although salaries vary based on experience and region, they normally fall between £25,000 and £40,000 per year. Furthermore, the industry is growing rather than contractingdue to rising consumer knowledge of food safety regulations and the growing food sector, which makes it a stable and favorable subject for career advancement. Key Features This Food Hygiene and Safety Level 3 (HACCP Included) Course Includes: This Food Hygiene and Safety (HACCP Included) Course is CPD Certified. Level 3 Diploma Free Certificate Developed by Specialist Lifetime Access on this Food Hygiene and Safety (HACCP Included) Course Course Curriculum Food Hygiene and Safety Level 3 (HACCP Included): Module 01: Fundamentals of Food Safety Module 02: Roles, Policies, and Responsibilities of a Food Supervisor Module 03: Understanding Laws and Legislation in Food Safety Module 04: Introduction to Food Safety Management Systems (FSMS) and HACCP Module 05: Implementing FSMS and Utilising Tools Module 06: Causes of Food Poisoning Module 07: Identification and Prevention of Contamination Module 08: Implementing Hazard Control Measures Module 09: In-Depth Analysis of Food Poisoning and Related Illnesses Module 10: Understanding Food Toxins and Their Prevention Module 11: Risks and Best Practices in Food Handling Module 12: Temperature Control Measures Module 13: Recording and Monitoring Temperatures Module 14: Prevention of Spoiled Food Module 15: Designing Food Premises for Safety Module 16: Efficient Waste Disposal, Cleaning, and Disinfection Module 17: Pest Management in Food Facilities Module 18: Effective Training and Supervision of Staff Learning Outcomes Food Hygiene and Safety Level 3 (HACCP Included): Fundamentals of Food Safety: Identify key food hygiene and food safety principles for compliance and implementation. Roles and Responsibilities: Demonstrate understanding of food supervisor duties, policies, and legal obligations. FSMS and HACCP: Apply knowledge to establish and manage Food Safety Management Systems. Contamination Prevention: Implement hazard control measures for identification and prevention of contamination. Temperature Control: Execute effective temperature control measures and monitor recording processes. Facility Safety: Design and maintain food premises ensuring food safety standards and regulations compliance. Certification After completing this Food Hygiene and Safety Level 3 (HACCP Included) course, you will get a free Certificate. CPD 10 CPD hours / points Accredited by The CPD Quality Standards (CPD QS) Who is this course for? This Food Hygiene and Safety Level 3 (HACCP Included) course is accessible to anyone eager to learn more about this topic. Through this course, you'll gain a solid understanding of Food Hygiene and Safety Level 3 (HACCP Included). Moreover, this course is ideal for: Food industry professionals seeking advanced food hygiene and food safety knowledge. Aspiring managers in hospitality and catering sectors want to learn about food hygiene and food safety. Regulatory compliance officers responsible for food hygiene and food safety oversight. Quality control personnel focusing on maintaining food safety standards. Individuals aspiring to enhance their expertise in food hygiene and food safety. Requirements This Food Hygiene and Safety Level 3 (HACCP Included) course is accessible to anyone eager to learn more about this topic. Through this course, you'll gain a solid understanding of Food Hygiene and Safety Level 3 (HACCP Included). Moreover, this course is ideal for: Career path After finishing the Food Hygiene and Safety course you will have multiple job positions waiting. Some Job sectors of Food Hygiene and Safety are: Catering Manager - £30K to £40K/year Food Safety Manager - £25K to £40K/year Quality Assurance Technician - £20K to £30K/year Environmental Health Officer - £25K to £45K/year Hygiene Supervisor - £20K to £35K/year Compliance Officer - £25K to £40K/year Certificates Certificate of Completion Digital certificate - Included Will be downloadable when all lectures have been completed.

🚀 Unlock Your Potential with Level 3 Health and Safety in the Workplace Course! 🚀 Are you ready to elevate your career and become a safety champion in your workplace? Look no further! Our Level 3 Health and Safety in the Workplace course is designed to equip you with the essential knowledge and skills to ensure a safe and healthy working environment for yourself and your colleagues.   🌟 Benefits of Taking Our Course 🌟 Enhanced Safety Awareness: Gain a comprehensive understanding of occupational health and safety principles, regulations, and best practices. You'll learn how to identify and mitigate workplace hazards effectively. Reduced Risks: By mastering risk assessment techniques and emergency procedures, you'll be empowered to minimize workplace accidents and injuries, creating a safer environment for everyone. Legal Compliance: Stay ahead of the curve by staying updated on the latest health and safety legislation. Our course will ensure you understand your legal obligations as an employer or employee, helping you avoid costly penalties and legal issues. Improved Confidence: Armed with knowledge and expertise, you'll approach your work with confidence, knowing that you have the skills to handle any safety-related challenges that may arise. Career Advancement: Stand out in the job market and open doors to new opportunities. Employers highly value candidates with strong health and safety credentials, making you a desirable asset to any organization. Peace of Mind: Whether you're a seasoned professional or new to the field, our course provides you with the peace of mind that comes from knowing you're equipped to protect yourself and others in the workplace.   Who is this for? 👨‍💼👩‍💼 Our Level 3 Health and Safety in the Workplace course is suitable for individuals across various industries and job roles, including: Managers and supervisors Human resources professionals Safety officers and representatives Health and safety consultants Workers in high-risk environments No matter your background or experience level, if you're committed to ensuring a safe and healthy workplace, this course is for you!   Career Path 🛤️ Completing our Level 3 Health and Safety in the Workplace course opens up a world of opportunities in the field of occupational health and safety. Here are just a few potential career paths you can pursue: Health and Safety Manager: Lead safety initiatives within organizations, develop policies and procedures, and oversee compliance efforts to ensure a safe working environment. Safety Consultant: Provide expert guidance to businesses on health and safety matters, conducting assessments, offering recommendations, and assisting with regulatory compliance. Risk Manager: Identify and assess potential risks within organizations, develop strategies to mitigate those risks, and ensure compliance with relevant safety standards and regulations. Occupational Health Specialist: Focus on preventing and managing workplace injuries and illnesses, promoting employee wellness, and advocating for safe working conditions. Safety Trainer: Educate workers on safety protocols, procedures, and best practices, empowering them to play an active role in maintaining a safe workplace culture.   Don't miss out on the opportunity to take your career to new heights with our Level 3 Health and Safety in the Workplace course! Enroll today and embark on your journey towards becoming a safety leader in your industry. 🌟   FAQ (Frequently Asked Questions) for Level 3 Health and Safety in the Workplace Q1: What is the significance of Level 3 Health and Safety in the Workplace? Level 3 Health and Safety in the Workplace course is designed to provide participants with advanced knowledge and skills necessary to ensure a safe and healthy work environment. It covers a wide range of topics including risk assessment, hazard identification, emergency procedures, and legal responsibilities. Achieving this level of certification demonstrates competence in managing workplace health and safety effectively, which is crucial for protecting employees, complying with regulations, and minimizing risks of accidents or injuries. Q2: Who should consider taking the Level 3 Health and Safety in the Workplace course? This course is suitable for individuals in various industries and roles, including managers, supervisors, health and safety representatives, and anyone responsible for overseeing health and safety practices within the workplace. It is beneficial for those seeking to enhance their understanding of health and safety regulations, improve risk management skills, and contribute to creating a safer work environment for themselves and their colleagues. Q3: What topics are covered in the Level 3 Health and Safety in the Workplace course? The course curriculum typically includes modules on risk assessment, hazard control measures, health and safety legislation, accident investigation, emergency procedures, and promoting a positive safety culture. Participants will also learn about the importance of communication, consultation, and training in maintaining effective health and safety practices within the workplace. Q4: How is the Level 3 Health and Safety in the Workplace course assessed? Assessment methods may vary depending on the training provider, but they often include a combination of written examinations, practical assessments, and/or project work. Participants are evaluated on their understanding of key concepts, ability to apply health and safety principles to real-world scenarios, and compliance with relevant regulations and best practices. Q5: What are the potential benefits of completing the Level 3 Health and Safety in the Workplace course? Earning a Level 3 Health and Safety in the Workplace certification can lead to various benefits, including improved job prospects, enhanced credibility in the field of health and safety, better risk management skills, increased awareness of legal responsibilities, and ultimately, a safer and healthier work environment for all employees. Additionally, organizations may benefit from reduced accident rates, improved compliance with regulations, and enhanced reputation for prioritizing health and safety. Course Curriculum Module 01 Health and Safety Management Health and Safety Management 00:00 Module 02 Engineering Safety Engineering Safety 00:00 Module 03 Fire and Electrical Safety Fire and Electrical Safety 00:00 Module 04 Occupational Health and Personal Protective Equipment Occupational Health and Personal Protective Equipment 00:00 Module 05 Mental Healthcare Mental Healthcare 00:00 Module 06 Public Health Public Health 00:00 Module 07 Working at Height - Hazards and Control Working at Height - Hazards and Control 00:00 Module 08 Work Equipment Hazards and Control Work Equipment Hazards and Control 00:00 Module 09 Electrical Hazards and Control Electrical Hazards and Control 00:00 Module 10 Chemical and Biological Health Hazards and Control Chemical and Biological Health Hazards and Control 00:00 Module 11 Reporting Accidents and Incidents at Work Reporting Accidents and Incidents at Work 00:00 Module 12 Legal Framework (UK) for Workplace First Aid Legal Framework (UK) for Workplace First Aid 00:00 Module 13 Practice of self-hygiene Practice of self-hygiene 00:00 Module 14 HACCP Food Safety HACCP Food Safety 00:00 Module 15 A Guide to Safe Manual Handling A Guide to Safe Manual Handling 00:00 Module 16 Work Equipment Maintenance Work Equipment Maintenance 00:00 Module 17 Occupational Diseases Occupational Diseases 00:00 Module 18 Exposure to Mutagens Biological Agents and Carcinogens Exposure to Mutagens Biological Agents and Carcinogens 00:00 Module 19 Dangerous Occurrences Dangerous Occurrences 00:00 Module 20 RIDDOR Report RIDDOR Report 00:00

Prepare for a fulfilling role as a Healthcare Assistant. Acquire practical expertise in patient care, medical procedures, infection control, and effective communication. Enrol today!

Level 5 QLS Endorsed Diploma | 150 CPD Points | +Gifts: QLS Certificate + PDF Certificate | 24/7 Learner Support

Duration 3 Days 18 CPD hours This course is intended for The primary audience for this course is an IT, facilities or data centre operations professional working in and around the data centre and having the responsibility to achieve and improve high-availability and manageability of the data centre. Overview After completion of the course the participant will be able to:? Understand the design life cycle of data centres and the stages involved? Discuss the data centre requirements in great level of detail with vendors, suppliers and contractors to ensure that these requirements are met? Validate design plans, quotes and offers proposed by vendors/contractors? Understand redundancy levels for both the data centre design/setup and maintenance? Understand the various building considerations such as bullet proofing, mitigation of seismic activity, fire ratings and thermal stability? Understand how to install a raised floor that meets requirements, avoiding misalignment, level differences and leakage? Understand how to read a Single Line Electrical Diagram to identify and avoid the most common design issues? Choose the correct UPS and parallel configuration, learn and avoid classic parallel installation mistakes? Understand how to calculate battery banks, validate offered configurations to ensure they meet requirements? Understand what distance to keep to avoid EMF issues for human safety and equipment disturbances? Understand the fundamental cooling setup, CFM, Delta-T and other important factors? Understand contamination factors and limitations? Understand full details of fire suppression options, how to calculate gas content and verify installations? Understand how to measure data centre energy efficiency and how to improve it The course will bring participants to the level of a suitable sparring partner with suppliers. They will be able to verify offers provided by vendors for correctness, effectiveness and efficiency. Data Centre Design/Life Cycle Overview Overview of the phases of a data centre life cycle Planning, re-alignment and continuous improvement Standards and Rating Level Definitions Rating level history Difference between Uptime and TIA-942 Rating level definitions Redundancy options (N+1), 2N, 2(N+1) Concurrent Maintainability/Compartmentalisation Example configurations Substation and feed requirements Maintenance options Operational processes guidelines/standards Skill development Building Considerations Building location considerations Floor and hanging loads requirements Fire rating for walls and glass Blast protection Bullet proofing Forced entry protection Advanced Raised Floor & Suspended Ceiling Raised floor installation guidelines Techniques to install a proper and leveled raised access floor Common mistakes Choosing the right tiles and their locations Seismic-mitigating floor constructions Choosing the correct suspended ceiling Advanced Power Power infrastructure layout; Formulas which you should know for the data centre Single Line Electrical diagrams; how to read to ensure key components are present for protection Over current protection devices (MCB/MCCB/VCB/ACB/Fuses) definitions and what to use where Earth Leakage devices (RCB/RCD/ELCB/GFCI/ALCI/RCBO), definitions and what to use where Sizing of protective components Lightning strikes and surge protection devices (TVSS/SPD), how they operate, where to use and how to install Power cabling and cable run considerations PDU/DB setup and minimum requirements Generators; Generator types: Standy/Prime/Continuous Component make up and functions Fuel storage and calculation Paralleling of gen-sets Generator room/area requirements UPS Systems; Required specifications for UPS systems How to read data sheets and select the correct UPS Requirements for parallel configurations and avoid pitfalls such as single point of failures How parallel installation should be done, classic mistakes made by installers and how to avoid these Harmonic Filters; Active/Passive filters and their application Battery Banks; Battery bank terminology Designing battery banks, how to calculate, and double check the battery bank to be installed Battery charging pitfalls and ensuring the right charger is being installed and used Using parallel battery banks; how to properly install them, limitations and risks when using batteries in parallel How to test batteries correctly and make decisions on cell/block or string replacement Battery casing choices; ABS, V0, V1, V2 Alternative energy storage; flywheel, re-usable cell, compressed air UPS, etc. Advanced Electro Magnetic Fields Sources of EMF Difference between single, three phase and bus-bar EMF Options available to measure EMF and how to interpret the results from single-axes and composite measurements Guidance on safe distance for equipment and humans Calculation of EMF attenuation factor for shielding material permeability and saturation factors Advanced Cooling Important definitions; dry-bulb, wet-bulb, dew-point, RH, sensible and latent heat Psychometric chart and ASHRAE recommendations Environmental class definitions and thermal specifications Temperature/humidity measurements guideline Heat dissipation methods Altitude impact on temperature intake to ICT equipment Floor plan setup for effective cooling Differences in tile surface and supporting structure and the air-flow performance impact Rack door construction and the flow performance impact Equipment Delta-T and its impact Optimising air flow Thermal units conversions Calculations for air volume displacement (CFM/CMH) Cooling capacity calculations Air-conditioning selection De- / humidifying options Air conditioning efficiency SHR impact on cost saving Efficiency indicator New cooling principle and techniques (Submerged, VSD/VRF/ECF/water- and air side economisers) Redundancy guidelines for air-conditioners avoiding classic misconceptions and mistakes for meeting ANSI/TIA-942 compliant designs Installation requirements Connections to fire panel and EPO Commissioning of air conditioners Set points and calibration CFD (Computational Fluid Dynamics) Advanced Fire Protection The fire triangle and elements to stop a fire Detection systems in detail (VESDA, VIEW, smoke sensors) Considerations for installation of sensors Proper testing of smoke sensors Water based systems i.e. deluge, wet-pipe, dry-pipe, pre-action and why most of them don't work and how to detect this Details on Inert and Halocarbon systems and how to select the correct system for your data centre How to calculate the gas content ensuring the appropriate level is installed to suppress the fire including safety considerations Other requirements for gas systems such as release times, hold times, pipe install requirements and other important factors Requirements for the fire detection panel Installation verification, methods, what to check and how New advanced fire suppression technologies Design and Install Scalable Networking Cabling System ANSI/TIA942 cabling structure topology ToR, EoR Design Intelligent patching systems Installation best practice such as routing, bending radius, separation from power, containment fill ratio, fiber link loss calculator, bonding and grounding requirement Standard for telecommunications labeling and administration Environmental Specifications and Contamination Control Acoustic noise effects, regulations, specifications and limits Data centre contaminations and classifications Measurements, standards and limits Preventive measures and avoidance Data Centre Efficiency Business drivers to go Green High-availability or Green? Green guidelines and standards How to measure it and what are acceptable numbers compared to the general industry PUE classes defined by Green Grid and issues with PUE Techniques for saving energy in all parts of the data centre i.e. application/system level, cooling, power distribution Mock ExamEXAM: Certified Data Centre Specialist

  ISO 37001 Lead Implementer training enables you to develop the necessary expertise to support an organization in establishing, implementing, managing and maintaining an Anti-bribery Management System (ABMS) based on ISO 37001 About This Course   During this training course, you will also gain a thorough understanding of the global anti-corruption best practices of Anti-bribery Management Systems and effectively prevent, detect and address bribery before it negatively impacts an organization's reputation and profits.   After mastering all the necessary concepts of Anti-bribery Management Systems, you can sit for the exam and gain "Certified ISO 37001 Lead Implementer' credential. By holding this Certificate, you will be able to demonstrate that you have the practical knowledge and professional capabilities to implement ISO 37001 in an organization.   Learning objectives   Acknowledge the correlation between ISO 37001 and other standards and regulatory frameworks Master the concepts, approaches, methods and techniques used for the implementation and effective management of an ABMS Learn how to interpret the ISO 37001 requirements in the specific context of an organization Learn how to support an organization to effectively plan, implement, manage, monitor and maintain an ABMS Acquire the expertise to advise an organization in implementing Anti-bribery Management System best practices   Educational approach   This training is based on both theory and best practices used in the implementation of an ABMS Lecture sessions are illustrated with examples based on case studies Practical exercises are based on a case study which includes role playing and discussions Practice tests are similar to the Certification Exam Prerequisites   A foundational understanding of ISO 37001 and knowledge of implementation principles.  What's Included?   Refreshments & Lunch (Classroom only) Course Slide Deck Official Study Guides CPD Certificate The Exam Accreditation Assessment     Delegates sit a combined exam, consisting of in-course quizzes and exercises, as well as a final 12 question, essay type exam on Day 4 of the course. The overall passing score is 70%, to be achieved within the 150 minute time allowance. Exam results are provided within 24 hours, with both a Certificate and a digital badge provided as proof of success.   Provided by   This course is Accredited by NACS and Administered by the IECB. Who Should Attend?   Professionals looking to implement and maintain an Anti-Bribery Management System Compliance officers

  ISO 14001 Lead Implementer training enables you to develop the necessary expertise to support an organization in establishing, implementing, managing and maintaining an Environmental Management System (EMS) based on ISO 14001. About This Course   During this training course, you will also gain a thorough understanding of the best practices of Environmental Management Systems, consequently reducing an organization's negative environmental impacts and improving its overall performance and efficiency. After mastering all the necessary concepts of Environmental Management Systems, you can sit for the exam and gain "Certified ISO 14001 Lead Implementer' Certification. By holding this Certification, you will be able to demonstrate that you have the practical knowledge and professional capabilities to implement ISO 14001 in an organization. Learning objectives   Acknowledge the correlation between ISO 14001, ISO 14040 and other standards and regulatory frameworks Master the concepts, approaches, methods and techniques used for the implementation and effective management of an EMS Learn how to interpret the ISO 14001 requirements in the specific context of an organization Learn how to support an organization to effectively plan, implement, manage, monitor and maintain an EMS Acquire the expertise to advise an organization in implementing Environmental Management System best practices Educational approach   This training is based on both theory and best practices used in the implementation of an EMS Lecture sessions are illustrated with examples based on case studies Practical exercises are based on a case study which includes role playing and discussions Practice tests are similar to the Certification Exam Prerequisites   A fundamental understating of ISO 14001 and comprehensive knowledge of implementation principles.  Who Should Attend?   Managers or consultants involved in Environmental Management Expert advisors seeking to master the implementation of an Environmental Management System Individuals responsible for maintaining conformance with EMS requirements EMS team members What's Included?   Refreshments & Lunch (Classroom courses only) Course Slide Deck Official Study Guides CPD Certificate The Exam Accreditation Assessment     Delegates sit a combined exam, consisting of in-course quizzes and exercises, as well as a final 12 question, essay type exam on Day 4 of the course. The overall passing score is 70%, to be achieved within the 150 minute time allowance. Exam results are provided within 24 hours, with both a Certificate and a digital badge provided as proof of success. Provided by   This course is Accredited by NACS and Administered by the IECB.

  Delivered in either our Live Online format (4 days) or in our Classroom (5 days), the ISO 37001 Lead Auditor training course enables you to develop the necessary expertise to perform an Anti-bribery Management System (ABMS) audit by applying widely recognized audit principles, procedures and techniques. About This Course   During this training course, you will acquire the knowledge and skills to plan and carry out internal and external audits in compliance with ISO 19011 and ISO/IEC 17021-1 certification process.   Based on practical exercises, you will be able to master the audit techniques and become competent to manage an audit program and audit team.    After acquiring the necessary expertise to perform this audit, you can sit for the exam and gain the "Certified ISO 37001 Lead Auditor' credential. By holding this Certificate, you will demonstrate that you have the capabilities and competencies to audit organizations based on best practices.   Learning objectives   Understand the operation of an Anti-bribery Management System based on ISO 37001 and its principal processes Understand the correlation between ISO 37001 and other standards and regulatory frameworks Understand the auditor's role in planning, leading and following-up on a management system audit in accordance with ISO 19011 Interpret the requirements of ISO 37001 in the context of an ABMS audit Strengthen the personal skills necessary for an auditor to act with due professional care during an audit   Educational approach   Lecture sessions are illustrated with practical questions and examples Practical exercises include examples and discussions Practice tests are similar to the certification exam Prerequisites   A foundational understanding of ISO 37001 and knowledge of audit principles. What's Included?   Refreshments & Lunch (Classroom only) Course Slide Deck Official Study Guides CPD Certificate The Exam Who Should Attend?   Auditors seeking to perform and lead Anti-bribery Management System (ABMS) certification audits Managers or consultants seeking to master an Anti-bribery Management System audit process Individuals responsible for maintaining conformance with ISO 37001 requirements Technical experts seeking to prepare for an Anti-bribery Management System audit Expert advisors in Anti-bribery Management Accreditation Assessment   The exam is delivered in a 12 question essay format, to be completed within 150 minutes and gaining a 70% pass mark. Exam results are provided within 24 hours. Provided by   This course is Accredited by NACS and Administered by the IECB.

  During this training course, you will also gain a thorough understanding of the best practices of Medical Devices Quality Management Systems and be able to improve an organization`s overall performance by consistently providing safe and qualitative medical devices. After mastering all the necessary concepts of Medical Devices Quality Management Systems, you can sit for the exam and gain the "Certified ISO 13485 Lead Implementer' Certificate. By holding this Certificate, you will be able to demonstrate that you have the practical knowledge and professional capabilities to implement ISO 13485 in an organization.  About This Course   Learning Objectives Acknowledge the correlation between ISO 13485 and other standards and regulatory frameworks Master the concepts, approaches, methods and techniques used for the implementation and effective management of a MDQMS Learn how to interpret the ISO 13485 requirements in the specific context of an organization Learn how to support an organization to effectively plan, implement, manage, monitor and maintain a MDQMS Acquire the expertise to advise an organization in implementing Medical Devices Quality Management System best practices   Course Agenda Day 1: Introduction to ISO 13485 and initiation of a MDQMS Day 2: Plan the implementation of a MDQMS Day 3: Implementation of a MDQMS Day 4: MDQMS monitoring, measurement, continuous improvement and preparation for a certification audit, and the final exam. Assessment     Delegates sit a combined exam, consisting of in-course quizzes and exercises, as well as a final 12 question, essay type exam on Day 4 of the course. The overall passing score is 70%, to be achieved within the 150 minute time allowance. Exam results are provided within 24 hours, with both a Certificate and a digital badge provided as proof of success. Prerequisites   A fundamental understanding of ISO 13485 and comprehensive knowledge of implementation principles. What's Included?   Certification fees are included on the exam price Training material containing over 450 pages of information and practical examples will be distributed An attestation of course completion worth 32 CPD (Continuing Professional Development) credits will be issued to the participants who have attended the training course. In case of exam failure, you can retake the exam within 12 months for free Who Should Attend?   Managers or consultants involved in Medical Devices Quality Management Expert advisors seeking to master the implementation of a Medical Devices Quality Management System Individuals responsible for maintaining conformance with MDQMS requirements MDQMS team members Accreditation Provided by   This course is Accredited by NACS and Administered by the IECB

  During this training course, delegates will acquire the knowledge and skills to plan and carry out internal and external audits in compliance with ISO 19011 and ISO/IEC 17021-1 certification process. Based on practical exercises, you will learn audit techniques and become competent to manage an audit program, audit team, communication with customers, and understand reporting requirements. After acquiring the necessary expertise to perform this audit, you can sit for the exam and gain the "Certified ISO 13485 Lead Auditor' Certificate. By holding this Certificate, delegates can demonstrate that they have the competencies to audit organizations based on best practices. About This Course   Learning Outcomes   Review a Medical Devices Quality Management System based on ISO 13485 Acknowledge the correlation between ISO 13485 and other standards and regulatory frameworks Understand an auditor's role to: plan, lead and follow-up on a management system audit in accordance with ISO 19011 Learn how to lead an audit and audit team Learn how to interpret the requirements of ISO 13485 in the context of a MDQMS audit Acquire the competencies of an auditor to: plan an audit, lead an audit, draft reports, and follow-up on an audit in compliance with ISO 19011   Course Agenda   Day 1: Introduction to Medical Devices Quality Management Systems (MDQMS) and ISO 13485 Day 2: Audit principles, preparation and launching of an audit Day 3: On-site audit activities Day 4: Closing the audit and final exam.   Assessment     Delegates sit a combined exam, consisting of in-course quizzes and exercises, as well as a final essay style exam, consisting of 12 questions, on Day 4 of the course. The overall passing score is 70%, to be achieved within the 150 minute time allowance. Exam results are provided within 24 hours, with both a Certificate and a digital badge provided as proof of success.   Prerequisites   An understanding of ISO 13485 requirements and knowledge of audit principles. What's Included?   Certification fees are included on the exam price Training material containing over 500 pages of information and practical examples will be distributed An attestation of course completion worth 32 CPD (Continuing Professional Development) credits will be issued to the participants who have attended the training course. Who Should Attend?   Auditors seeking to perform Medical Devices Quality Management System (MDQMS) certification audits Managers or consultants seeking to understand the Medical Devices Quality Management System audit requirements Individuals responsible for maintaining conformance with Medical Devices Quality Management System requirements Accreditation Provided by   This course is Accredited by NACS and Administered by the IECB