56220 Courses near Manchester delivered Online

Who is this Level 3 NVQ aimed at? The experienced worker qualification is for practising electricians with at least 5 years experience but have never formally completed an industry apprenticeship or equivalent Level 3 NVQ Qualification. This is suitable for self-employed and employed electricians. This is the Level 3 pathway for practising electricians to obtain your ECS Gold Card and JIB Grading. To complete the full qualification you will also need to: Have completed an AM2e Assessment Have a current Wiring Regulations Qualification BS7671 Have an initial verification qualification such as a C&G 2391-50 What’s involved in the qualification? After an initial Skills Scan, we will discuss the gaps that need to be filled and you will be assessed using a range of methods to complete the evidence gathering process.There will also be Professional Discussions to discuss areas of expertise and you can choose either an installation or maintenance route based on the work you carry out.There are seven Performance Units to be assessed for the qualification, these are: Apply Practices and Procedures for Maintenance Apply Health, Safety and Environmental Considerations Organise and Oversee the Electrical Work Environment Apply Design and Installation Practices and Procedures Terminate and Connect Conductors Inspect, Test and Commission Electrical Systems Apply Fault Diagnosis and Rectification On completion of the Experienced Worker assessment you will be able to use the qualification to apply for a JIB Gold Card. This qualification is for experienced electricians who can demonstrate over 5 years experience.It is not suitable for new entrants or those currently on an apprenticeship.

Who should learn? This course has been designed for those who are new to EV Charging Installations or for those requiring a better understanding of electric vehicle charging equipment installations. Learners using this course could be from any background or industry sector, from apprentices through to senior managers. Course Introduction This online course will cover the key aspects of the design, specification and installation of Electric Vehicle Charging Equipment Installation. This course will look at the requirements detailed in Section 722 of BS 7671:2018+A1:2020 as well as the IET Code of Practice for Electric Vehicle Charging Equipment Installation, 4th Edition. The course will also help to enhance your expertise on the best practice for Electric Vehicle Charging Equipment Installation, providing you with a deeper understanding of how to select and use the correct earthing systems to protect against electric shock as well looking into vehicle-to-grid, on street installations and smart infrastructure integration. We would recommend that you purchase a copy of The Code of Practice For Electric Vehicle Charging Equipment Installation, Fourth Edition to get the best out of this course. Learning Objectives Through this online course, you will learn: How to specify Electric Vehicle Charging Equipment Installations How to design electrical installations containing electric vehicle charging and supply equipment The steps involved in planning, installing and commissioning of electric vehicle charging points Key risks and hazards for various types of installation, and how to address them, including: Dwellings, Commercial and Industrial premises, On-Street installations, and filling stations.

This course will give an overview of a number of risk assessment techniques including Bowtie, Fault Trees, QRA, frequency assessment, consequence assessment and Risk Assessment Matrix. The course also explores human factors, human failures and human factors engineering and integration with example case studies from various industries. The course discusses what Functional Safety is and the ideas behind using LOPA and SIL for risk reduction. Finally, it explains how major accident scenarios affecting the environment are identified, and how their risks are assessed, ranked, and managed.

This course explains the principles of risk acceptance and whether risks are reduced to As Low As Reasonably Practicable (ALARP). It also explores risk treatment options and the basic fundamentals of the emergency management life cycle.

This is an upgrade to and will replace, the already existing City & Guilds 17th Edition Wiring Regulations all subsequent amendments. Course Description: If you have passed your 17th Edition since the last amendment then you are eligible to take this short 1 day 18th Edition update course! Save time and money by covering the topics you need for the new regulations, without having to go over all that you already know. If you have not yet done the 17th Edition then you will need to take our 3 day 18th Edition course. Changes for 18th Edition are as follows: Protection against overvoltages – Clause 443 is likely to be overhauled. Protection against fire – Chapter 42 will be updated with extra information on arc fault detection Electrical Embedded heating – Section 753 will be extended to include embedded electrical heating systems for surface heating, and will include de-icing and frost prevention systems. Energy efficiency – There will be a brand new section covering energy efficiency Please be aware that the Wiring Regulations course is not designed to teach you every regulation in the book but it will teach you the best practices on how to reference the latest regulations as you would on the job. As such key topics currently covered on the 17th Edition will still be included. We have been delivering Wiring Regulations courses for many years and although it is mainly theory based you cannot beat real training in a real classroom. By training with other people in your class you will benefit from being able to ask relevant questions as well as finding the answers to many questions from your fellow students that you may not have even thought of. City & Guilds The City & Guilds 2382-22 course will replace the current C&G 2382-15 certificate. This upgrade course will outline the change in the regulations and candidates must complete an online, multiple choice exam. Focus: You will study the latest standard of the IEE wiring regulations, including essential subjects such as safety, selection and erection of electrical equipment. There are 8 key modules and current amendments: Section 1 – Scope, Object and FundamentalsSection 2 – DefinitionsSection 3 – Assessment of general characteristicsSection 4 – Protection for SafetySection 5 – Selection and Erection of equipmentSection 6 – Inspection & TestingSection 7 – Special Installations or locationsSection 8 – Functional Requirements This course does include the latest amendments such as: Electromagnetic Disturbance Surge Protection Medical locations Operating and Maintenance Gangways Arc Fault Detection Devices (AFDDs) Changes to fire safety requirements in chapter 422, covering the design of electrical installations in industrial, commercial and multiple-occupancy homes, as well as new information for ‘protected escape routes’ Protection against over voltages Changes across Part 7: Special Locations This classroom based course will show, teach and perfect you on how to reference and use the book for situations that you will encounter while working in the field.

This course provides an overview of a number of high-profile accidents, highlighting the importance of risk and safety management. It explores what risk is, describes the role and use of risk management throughout the project lifecycle and explores the benefits of the risk management process.

The 1 Day F-Gas renewal course covers changes to the original F Gas Regulation which came in to effect in January 2015. It is aimed at those who have primarily continued to work in the Air Conditioning and Refrigeration industry since initially achieving their F Gas Certificate. The day includes:- A short theoretical session and a short practical refresher. Short multi choice BESA assessment. Short practical assessment. You must bring passport size photo ID and your old F-Gas Card or Certificate. Lunch and refreshments provided. The price includes ALL exam fees.

Electrical safety in organisations is often the responsibility of non-electrically qualified staff, such as facilities managers, risk managers or health & safety officers who have not had systematic training in how to prevent electrical hazards in the workplace. This situation results in a number of deaths in the workplace being caused by electrical incidents. This course provides a comprehensive overview of the fundamentals of electrical safety and a systematic set of principles for assessing and managing electrical safety in any business and across all sectors of industry and the public sector: the subject is universally applicable, across industries and countries. The course is applicable to the buildings, facilities, equipment and environments associated with a wide range of organisations, irrespective of size, which includes the industrial, commercial and the public sectors. The course provides practical guidance to enable individuals and their organisations to have a level of knowledge and understanding to manage the risks associated with an electrical system. It will focus on providing a specific procedure for managing electrical safety. The course follows the structure of the IET’s Code of Practice for Electrical Safety Management. The aim of the Code of Practice for Electrical Safety Management is to provide good practice guidance to enable individuals and their organisations to have a level of knowledge and understanding to manage the risks associated with an electrical system. There are many technical publications that provide guidance on certain aspects of electrical safety but not in a way that provides a process for managing electrical safety.

This course introduces the key concepts of the Internet of Things and cybersecurity. The course will provide an insight into the Internet of Things; the basics of cybersecurity; and describe a framework to protect IOT assets. This course will also examine real-world examples of IOT deployments and their cybersecurity, to highlight key lessons and key deployment actions that can be taken.

This course explains how to identify hazards, which is an important initial step in the risk management process. It also explores HAZID/ENVID studies and explains what a HAZOP is, when it should be used, and the basic methodology used to conduct the risk assessment.