3545 Courses in Cardiff delivered Online

What is the AM2 assessment? The AM2 assessment is an industry recognised trade test designed to evidence that candidates have gained all relevant and safety-critical competencies during their training process. It provides a single standard that has been agreed upon by employers within the electrical industry, giving a reliable and trusted guarantee of safe, high-quality skills for the electrotechnical industry. Who is this for? This is aimed at apprentices who are coming to the end of their training for the JIB apprentice training scheme and the Installation of modern apprenticeships. This course is also for experienced electricians, specifically those who are looking at taking the experienced worker route (AM2E.) There are a range of assessments for candidates based on their level: AM2 – This is for candidates undertaking the JIB mature candidate assessments and those following the level three NVQ who isn’t an apprentice. AM2S – This is for electrotechnical apprentices who are training against the apprenticeship standard AM2E – This is for experienced workers who are completing the experienced worker assessment. Please note: this can only be taken once you have gained the experienced worker qualification, proof must be provided before booking the AM2 assessment. What does this assessment consist of? Overall, the AM2 is an in-depth assessment carrying out tasks to show what you have learnt on your training. It is a practical assessment with five sections (six for AM2E and AM2S) and a short online component. Candidates will be expected to install, connect, terminate, inspect, test, commission and diagnose faults, following installation specifications provided and any relevant statutory and non-statutory regulations on: A three-phase distribution board and subcircuit A central heating/sustainable energy system Lighting and power circuits A data cabling system A safety services circuit and device Installation of containment systems (AM2E and AM2S only) Candidates will complete timed tasks in equipped areas that contain typical electrical installation wiring systems – all work must comply with BS7671 Wiring Regulations, industry best practice, and meet the requirements of relevant health and safety legislation. The assessment will be carried out in strict exam conditions across 2.5 days. Do I need an AM2 certificate to work as an electrician? Apprentices must pass their AM2 test in their final year to complete their apprenticeship. Also, if the apprenticeship standard is not being followed, an AM2 certificate and a level three NVQ is required to gain a gold card. If you are already working as an electrician, you will not need an AM2 certificate. If you are training to be an electrician and are registering for your NVQ level three in Electrical Installation or Maintenance, the electrotechnical diploma now includes the AM2. The AM2 certification is an industry recognised and something that many employers will actively seek when hiring new staff. It can also be attractive to potential customers.

This five-day course is a must for anyone who is considering or already working in a role with site manager responsibilities. This course covers all relevant legislation affecting safe working in the building, construction, and civil engineering industries. It is endorsed by Build UK as the standard training for all construction managers. Aims To give a clear understanding of health, safety, welfare, and environmental legislation that affects your management role. It highlights the need for risk assessment in the workplace, the implementation of the necessary control measures and adequate communication to sustain a health and safety culture within the workforce. Course Content To give a clear understanding of health, safety, welfare, and environmental legislation that affects your management role. It highlights the need for risk assessment in the workplace, the implementation of the necessary control measures and adequate communication to sustain a health and safety culture within the workforce. Course Content • Health, safety, welfare and environmental legislation affecting your daily work • New guidance and industry best practice • Duties and responsibilities with regards to health, safety, welfare, and the environment • Safe working Prerequisites This course is for you if you’re considering, or already have management responsibilities for planning, organising, monitoring, controlling and administering groups of staff e.g. site manager. Assessment At the end of this course, all delegates will have a clear understanding of controlling health and safety on site from a manager’s role. Certificate The certification for this course is valid for 5 years and is endorsed by Build UK as a standard training for all site managers. To remain certified in this area, you will need to take a refresher course before the expiry date on your certificate, otherwise the full course will need to be retaken. Instructions Please note all online Site Management Safety Training Scheme courses with the venue “Online” will be delivered by a tutor over a video call. This training will be delivered and assessed in English language; therefore, a good standard is required to complete the course. Further attendee information will be sent in a separate email, please check your inbox.

Our Site Management Safety Training Scheme (SMSTS) refresher training courses, available both online and in-person, are designed for managers and individuals in positions of authority who completed their original SMSTS training program less than three years ago. Aims Participants will undertake a concise yet equally engaging training program covering all essential aspects of enforcing health and safety codes of practice at construction sites. Topics include in-depth discussions on risk assessments and effective methods for monitoring and managing industry-specific hazards. Instructions For online courses labeled “Remote Learning,” a tutor will deliver the training via video call. All SMSTS courses are delivered and assessed in English. Participants must have a good command of the language to successfully complete the program. Additional attendee information will be provided via email. Please ensure you check your inbox.

This two-day course is a must for anyone who is considering or already working in a role with supervisory responsibilities. This course provides an understanding of health, safety, welfare, and environmental issues. It highlights legal responsibilities and the need to promote health and safety to supervise effectively. It is endorsed by Build UK as the standard training for all supervisors working on Build UK sites. Aims To give a clear understanding of health, safety, welfare, and environmental legislation that affects your supervisory role. To help you fulfil your responsibilities regarding health, safety, welfare, and the environment. To help you implement new guidance and industry best practice affected by changes. Course Content • Health and safety law and how it will apply to supervisors. • Your supervisory responsibilities in controlling site safety. • Risk assessments and the need for method statements. • Effective site inductions, toolbox talks and method statement briefings. • Monitoring site activities effectively. • Timely intervention when bad practice is identified. Prerequisites This course is for you if you are considering, or already have, supervisory responsibilities. Assessment At the end of this course, all delegates will have a clear understanding of controlling health and safety on site from a supervisor’s role. Certificate This certification for this course is valid for 5 years and is endorsed by Build UK as a standard training for all supervisors. To remain certified in this area, you will need to take a refresher course before the expiry date on your certificate, otherwise the full course will need to be retaken. Instructions Please note all Site Supervisor Training courses with the venue “Remote Learning” will be delivered by a tutor over a video call. This training will be delivered and assessed in English language; therefore, a good standard is required to complete the course. Further attendee information will be sent in a separate email, please check your inbox

A taster course on the theory element of Phlebotomy. A follow on Introduction to Phlebotomy course with full training is also available.

Enhance your dental practice's safety and compliance with our 3-hour CPD accredited Dental Practice Legionella Responsible Person Course. Designed for Practice Owners, Registered Managers, and Senior Infection Control Leads, this online course offers expert guidance on legionella management, aligning with HSE ACOP L8, HSG274 Part 2, HTM 04-01, and HTM01-05 standards. Gain advanced understanding and confidence in legionella prevention in dental settings. Receive a GDC-compliant CPD Certificate upon completion. Join our live sessions led by skilled instructors for a transformative learning experience in dental health and safety management.

This one-day course is a must for anyone considering or already working within a construction or civil engineering environment. This course provides Health and Safety awareness and is endorsed by Build UK as a standard training for all operatives on site. Aims To give a clear understanding of Regulations & Legislation that applies to construction work and is an ideal refresher for any operative that has previously completed training in Health & Safety. Course Content • Accident prevention • Health & Safety law • Control and management of the site and your how your role fits in with this • Risk assessments and method statements • Performing safely on site • Reporting unsafe acts to prevent an accident • Individual & employee responsibilities • What to do if you think anyone’s Health and Safety is being put at risk Assessment At the end of this course, all delegates will have a clear understanding of the requirements of Health and Safety Legislation and their responsibilities to comply with them. Candidates will need to complete a multiple-choice exam at the end of the CITB course. They will also need to engage and interact with others throughout the day. Certificate This certification for this course is valid for 5 years and is endorsed by Build UK as a standard training for all operatives. The certificate is part of CSCS Green Card requirements. To remain certified in this area, you will need to retake the course before the expiry date or have completed an NVQ2 or higher in your skills set. Instructions Please note all Health & Safety Awareness courses with the venue “Remote Learning” will be delivered by a tutor over a video call. This training will be delivered and assessed in English language; therefore, a good standard is required to complete the course. Further attendee information will be sent in a separate email, please check your inbox.

Our CITB Online - Site Supervisors’ Safety Training Scheme (SSSTS) Refresher course is designed to give attendees a broad reminder of their responsibilities for health and safety on construction sites. Approved and endorsed by the United Kingdom Contractors Group, the SSSTS refresher course is a must for anyone who occupies a supervisory role on UKCG sites and wants to brush up on their knowledge of their legal responsibilities and the latest construction industry regulations. The SSSTS Refresher course has been created to provide existing supervisors, or those who are just entering into a supervisory role, with in-depth knowledge of health and safety legislation and procedures. If a candidate completed a full SSSTS training course up to 5 years ago, they will be required to attend a refresher programme. Prerequisites SSSTS certificates are of course valid for up to 5 years, but due to the ever-changing nature of the industry, it is recommended that staff stay up to date by enrolling on a refresher course long before the qualification expires. Instructions Please note all Site Supervisor Training courses with the venue “Remote Learning” will be delivered by a tutor over a video call. This training will be delivered and assessed in English language; therefore, a good standard is required to complete the course. Further attendee information will be sent in a separate email, please check your inbox.

Health and Safety: Health and Safety "Prioritize workplace well-being with our comprehensive Health and Safety: Health and Safety solutions. Our innovative Health and Safety: Health and Safety program empowers you to create a secure environment. From risk assessments to emergency protocols, Health and Safety: Health and Safety is at the core of what we do. Elevate your workplace standards with Health and Safety: Health and Safety-ensuring a resilient, compliant, and thriving organizational culture for all. Invest in Health and Safety: Health and Safety for a brighter and safer future!" Why Choose Health and Safety Course from Us Health and Safety Course developed by industry experts. Free PDF certificate as soon as completing the Health and Safety course. Special Offers of this Health and Safety Course This Health and Safety Course includes a FREE PDF Certificate. Lifetime access to this Health and Safety Course Instant access to this Health and Safety: Health and Safety Course Get FREE Tutor Support from Monday to Friday in this Health and Safety: Health and Safety Course Courses: Level 2 Health and Safety at Work Workplace First Aid RIDDOR Training [ Note: Free PDF certificate as soon as completing the Health and Safety course] Health and Safety Training: Health and Safety This Health and Safety: Health and Safety course is designed for those who want to become more responsible employees. The most important workplace Health and Safety: health and safety fundamentals should be understood by managers, team leaders, business owners, and all workers at all levels. It is strongly advised that anyone from newcomers to experienced practitioners must regularly revisit critical Health and Safety: health and safety issues. Industry Experts Designed this Health and Safety: Health and Safety course into 12 detailed modules. Curriculum of Health and Safety Training This Health and Safety Training course consists of 12 modules. Module 01: Foundations of Health and Safety at Work Module 02: Managing Health and Safety Module 03: Organising for Health and Safety Module 04: Health and Safety Culture Module 05: Health and Safety Policy Module 06: Risk Assessment Module 07: Workplace Hazards and Risk Control Module 08: Accidents and Emergencies Module 09: Vehicle Hazards and Risk Control Module 10: Fire Prevention and Protection Module 11: Electrical Safety Module 12: Managing the Safety Function Assessment Method of Health and Safety Training After completing each module of the Health and Safety: Health and Safety Training Course, you will find automated MCQ quizzes. To unlock the next module, you need to complete the quiz task and get at least 60% marks. Certification of Health and Safety After completing the MCQ/Assignment assessment for this Health and Safety: Health and Safety course, you will be entitled to a Certificate of Completion from Training Tale. Who is this course for? Health and Safety Training: Health and Safety This Health and Safety course is perfect for Students, Fresh Graduates, HR Managers, Business owners, and Team Leaders. Requirements Health and Safety: Health and Safety Students who intend to enrol in this Health and Safety: Health and Safety course must meet the following requirements: Health and Safety: Good command of the English language Health and Safety: Must be vivacious and self-driven Health and Safety: Basic computer knowledge Health and Safety: A minimum of 16 years of age is required Career path Health and Safety: Health and Safety Certificates Certificate of completion Digital certificate - Included

In today's digital age, the significance of Digital Health and Safety Training for Managers and Supervisors cannot be overstated. This course equips professionals with essential skills in Workplace Regulations and Risk Assessment, Preparedness for Emergencies, Documentation, Communication, Evaluation of Health and Safety Systems, and Workplace Safety Standards Enhancement. Mastery of these skills not only ensures a safer work environment but also enhances job prospects in the UK job market. Positions requiring such expertise often offer competitive salaries, with average earnings ranging from £30,000 to £50,000 annually. Moreover, as the demand for digital health and safety professionals continues to rise, with an estimated increase of 10-15% in the sector, obtaining certification in this field provides a competitive edge and opens doors to numerous career opportunities. Key Features: CPD Certified Developed by Specialist Lifetime Access Course Curriculum: Promotion of Health and Safety Module 01: Workplace Regulations and Risk Assessment Module 02: Preparedness for Emergencies within Work Environments Module 03: Documentation and Communication of Health and Safety Matters Module 04: Examination and Evaluation of Health and Safety Systems Module 05: Enhancement of Workplace Safety Standards and Employee Training Module 06: Adjustment of Health and Safety Approaches in Different Environments Learning Outcomes: Analyze workplace regulations and conduct effective risk assessments for safety enhancement. Develop comprehensive plans to manage emergencies within diverse work environments effectively. Demonstrate efficient communication and record-keeping practices for health and safety matters. Implement thorough inspection and auditing processes to ensure robust health and safety systems. Enhance safety standards and employee training programs for a safer work environment.: Apply adaptable health and safety strategies across various workplace environments effectively. Accreditation All of our courses are fully accredited, including this Health and Safety Training for Managers and Supervisors Course, providing you with up-to-date skills and knowledge and helping you to become more competent and effective in Health and Safety Training for Managers and Supervisors. Certification Once you've successfully completed your Health and Safety Training for Managers and Supervisors Course, you will immediately be sent a digital certificate. Also, you can have your printed certificate delivered by post (shipping cost £3.99). Our Health and Safety Training for Managers and Supervisors Course certification has no expiry dates, although we do recommend that you renew them every 12 months. CPD 10 CPD hours / points Accredited by CPD Quality Standards Who is this course for? This Health and Safety Training for Managers and Supervisors Course can be taken by anyone who wants to understand more about the topic. With the aid of this course, you will be able to grasp the fundamental knowledge and ideas. Additionally, this Health and Safety Training for Managers and Supervisors Course is ideal for:. Compliance Officer Site Supervisor Emergency Response Coordinator Managers overseeing workplace safety Supervisors managing team health and safety Safety officers in various industries Business owners ensuring regulatory compliance Requirements There are no requirements needed to enrol into this Health and Safety Training for Managers and Supervisors course. We welcome individuals from all backgrounds and levels of experience to enrol into this Health and Safety Training for Managers and Supervisors course. Career path After completing this Health and Safety Training for Managers and Supervisors Course you will have a variety of careers to choose from: Health and Safety Manager - £30K to £50K/year Occupational Health and Safety Advisor - £25K to £45K/year Environmental Health Officer - £28K to £45K/year Risk Manager - £35K to £60K/year Health and Safety Consultant - £30K to £55K/year Certificates Digital certificate Digital certificate - Included Will be downloadable when all lectures have been completed.