818 Courses

About this Training Course This 5 full-day course has been designed to develop skills in understanding the geometry and petrophysical characteristics of carbonate reservoirs. Depositional fabric, grain type and size and subsequent diagenetic modifications are the major controls on carbonate reservoir behaviour. The complex inter-relationship of the depositional and burial history can be unravelled to allow prediction of reservoir facies and reconstruction of three-dimensional reservoir models. This course will demonstrate the value of the reservoir model in volumetric assessment and development of carbonate reservoirs. *Previous knowledge of carbonate sedimentology is not required. Course Content in Summary: Carbonate reservoirs: Basic principles; depositional concepts; grain types; textures and fabrics; environmental reconstruction. The reservoir model - depositional and diagenetic characteristics: Sabkha/tidal flat; lagoon; shelf; reef (rudist and coral/algal); barrier/shoal; slope and redeposited; aeolian and lacustrine; karst plays. Carbonate diagenesis: Primary and secondary porosity; compaction; pressure solution; cementation; dolomitisation; porosity generation and destruction; fractures. Carbonate sequence stratigraphy Log response in carbonate rocks: Gamma; sonic; neutron; density; FMS. Reservoir assessment: Fracture reservoirs; reservoir modelling; volumetric assessment in correlation and mapping; effects of capillary pressure; interface with engineering. Training Objectives By attending this course, participants will be able to: Understand carbonate depositional systems and controls. Recognise and model controls on reservoir quality and pore systems, including diagenesis and fracturing. Understand and apply carbonate seismic stratigraphy and sequence stratigraphy. Interpret log responses. Target Audience This course is intended for petroleum geologists, explorationists, petrophysicists, geophysicists and engineers involved with exploration of carbonate plays and development of carbonate reservoirs. Trainer Your expert course leader is a Director and Senior Consultant Geologist who has worked on various carbonate consultancy projects, conducted detailed sedimentological, sequence stratigraphic and diagenetic technical studies and delivered training programmes. He was formerly Managing Director of Robertson UK Limited and was responsible for the integration between different disciplines, recognition, and encouragement of technical innovation and research and development programmes across all oil and gas divisions in the company. He was also responsible for all aspects of the performance of the main Geological, Geophysical and Reservoir Engineering Services in the company. POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information post training support and fees applicable Accreditions And Affliations

About this Virtual Instructor Led Training (VILT)  A decision to drill an exploration well with the objective to find a new oil or gas field must be based on sound assessment of the prospect risk and of the volumes. What is the chance that a well will find hydrocarbons, and how much could it be? Risk and volume assessments form the basis for decisions to drill a well or not, and as such form the link between subsurface evaluation and the business aspects of the petroleum industry. This Virtual Instructor Led Training (VILT) course explains how risks and volumes can be assessed in a realistic manner, based on a sound understanding of the geological details of the prospect as well as its regional geological setting and current play understanding. Participants of this VILT course will receive a softcopy of Risk and Volume Assessment Handbook which explains the concepts that are associated with probabilistic Risk & Volume (R & V) Assessment and contains many practical recommendations on how to translate geological understanding into meaningful inputs for probabilistic R &V assessments. The book is fully compatible with any probabilistic R & V tool in the industry. Training Objectives By the end of this VILT course, participants will be able to understand: The fundamentals of risk and volumes assessment; translating geological understanding into reasonable numbers and ranges. The difference between risk and uncertainty. Fundamentals of statistics; including explanation of distribution curves, understanding of expectation curves, do's and don'ts for adding risked volumes, and Bayes theorem. Uncertainty of trap, reservoir, seal and charge, illustrated by examples. Guidelines and exercises for estimating risks realistically and consistently. Calculating volume ranges for prospects and for portfolios of prospects; how to add prospect volumes for a correct representation of prospect portfolios. Incorporation of geophysical evidence (DHIs) in a realistic risk assessment. Target Audience This VILT course has been designed in the first place for geoscientists working in exploration, for prospect portfolio analysts and for their direct supervisors. It will also benefit staff from disciplines working closely with exploration staff, such as reservoir engineers, petrophysicists and geophysicists. Course Level Intermediate Training Methods Learning, methods and tools The VILT course will be delivered online in 5 half-day sessions comprising 4 hours per day, with 2 breaks of 10 minutes per day. It is the intention to have at least 2 smaller exercises per day. Time will be reserved for recapitulation, questions and discussions. VILT will be conducted either via Zoom or Microsoft Teams. Presenting materials can easily be done on this platform. When participants need to ask a question, they can raise their hand, write notes or interrupt the Instructor by using their microphone. The presenter can switch to a screen where he/she can see all participants (also when each participant is sitting in another location e.g. at home). There is also a whiteboard functionality that can be used as one would use a flip chart. Exercises will be done on an online platform which provides each participant with a private work area that can be accessed by the Instructor to discuss the exercise in a similar manner as in a classroom course. Each topic is introduced by a lecture, and learning is re-enforced by practical exercises and discussions. Handout material in electronic format will be provided. Trainer Dr. Jan de Jager has a PhD in Geology from the University of Utrecht. He joined Shell in 1979 as an exploration geologist, and worked in several locations around the world such as Netherlands, Gabon, USA, Australia, Argentina, and Malaysia in technical and management positions. During the last 10 years of his career, he was responsible for the quality assurance of Shell's exploration prospects in many parts of the world and for upgrading and replenishing Shell's global exploration portfolio. During this period, he had also developed extensive expertise in Prospect Risk and Volume assessments for which he ran successful internal training programmes. Following his retirement from Shell in 2010, Dr Jan de Jager took on a position as part-time professor at the University of Amsterdam and also serves as a consultant exploration advisor for various E&P companies. POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information about post training coaching support and fees applicable for this. Accreditions And Affliations

About this Virtual Instructor Led Training (VILT) Governments, regulators and energy companies are pursuing CO2 storage technologies to meet their net-zero carbon commitments as well as targets set by the international Paris Agreement on climate change. For successfully executing Carbon Capture & Storage (CCS) projects, various technical, operational, economic and environmental risks and associated stakeholders need to be managed. In this 5 half-day Virtual Instructor Led Training (VILT) course, the methods for managing risk in CCS projects are addressed with a focus on CO2 injection and storage. The VILT course will also demonstrate how to assess storage capacity of a potential CO2 storage reservoir, model framing techniques, and well injectivity issues related to CO2 injection. The potential leak paths will be discussed such as reservoir seals, leakage along faults and aspects of well integrity. In the VILT course, the design of a monitoring programme will also be discussed. The VILT course will be supported by various case studies. This VILT course will cover the following modules: CCS projects in an international context Site selection and site characterization Storage capacity assessment Injectivity assessment Containment assessment Measurement, monitoring & verification Training Objectives On completion of this VILT course, participants will be able to: Uncover the functions and associated components required to capture, transport and store CO2 in subsurface aquifers and (depleted) hydrocarbon reservoirs Find a systematic and integrated approach to risk identification and assessment for CO2 storage projects (maturation) Appreciate the requirements (physics modelling) and uncertainties to assess the CO2 storage capacity of a selected site. Understand the challenges, data and methods to assess CO2 well injectivity and well integrity Identify the leakage pathways of a selected storage site, and understand the assessment methods and associated uncertainties Learn how to design a monitoring program Target Audience This VILT course is intended for all surface and subsurface engineers such as facility engineers, geologists, geophysicists, reservoir engineers, petrophysicists, production technologists/engineers, well engineers and geomechanical specialists. Also, (sub)surface team leads, project managers, business opportunity managers, decision executives, and technical risk assessment & assurance specialists will benefit from this VILT course as it provides a common framework and workflow to develop a CCS project. For each class, it is highly recommended that a mix of disciplines mentioned above are represented to facilitate discussions from different perspectives. Course Level Basic or Foundation Training Methods This VILT course is built around cases in which teams work to identify and assess CO2 storage site issues using a systematic thought approach in this course. In addition, exercises are used to practise the aspects of the CCS risk assessment process. The VILT course provides a venue for discussion and sharing of good practices as well as opportunities to practise multi-discipline co-operation and facilitation. Participants are encouraged to bring their own work issues and challenges and seek advice from the expert course leaders and other participants about all aspects of CCS. This VILT course will be delivered online in 5 half-day sessions comprising 4 hours per day, with 2 breaks of 10 minutes per day. Trainer Trainer 1: Your expert course leader has more than 36 years of experience in the oil & gas industry with Shell. He gained broad experience in petroleum engineering, with expertise in integrated production systems from subsurface, wells and surface. He has had assignments in Production Technology, R&D, Production Chemistry, Rock Mechanics and Reservoir Engineering cEOR, with a proven track record in technology screening, development and deployment, field development planning, conceptual well design and Production System Optimization (PSO) of gas and oil fields as well as preparing Well, Reservoir & Facility Management (WRFM) strategies and plans. He had also worked on assignments in NAM and did fieldwork in Oman, Gabon and Shell Nigeria. He is a skilled workshop facilitator. He discovered his passion for teaching following an assignment in Shell Learning. During his time in Shell, he developed and taught technical courses to Shell professionals via blended learning. Trainer 2: Your second expert course leader has over 30 years of experience identifying, assessing and mitigating technical risks with Shell. The main focal point of his experience is in subsurface and Geomechanical risks. He is the the founding father of various innovations in how we assess risks by tool development (for bore hole stability, 3D geomechanical field evaluations and probabilistic assessment). He also developed an eye for people motivation, change management and facilitation. He was also responsible for the Geomechanical competence framework, and associated virtual and classroom training programme in Shell for 10 years. Trainer 3: Your third expert course leader has more than 30 years of experience in Shell, focusing on research and development in drilling and offshore systems. His areas of expertise is in project management, finance, business planning, investment, development studies and economics models. In 2021, he worked on a project that looked into the economic evaluation of P18A field complex for CO2 storage. He has an MSc in Mechanical Engineering (M.E.) TU Delft Netherlands (Hons) and a baccalaureate from Erasmus University Rotterdam. POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information about post training coaching support and fees applicable for this. Accreditions And Affliations

About this Virtual Instructor Led Training (VILT)  The Advanced Reservoir Engineering VILT course will address modern practical aspects of reservoir engineering during 5 half-days packed with lectures, virtual exercises, discussions and literature reviews. The participants' understanding of fundamental concepts and modern practical reservoir engineering methods will be deepened and a wide range of topics will be addressed. Topics covered The VILT course will emphasise reservoir engineering applications and include topics such as: Rock properties of clastic and carbonate reservoirs Reservoir characterisation Reservoir fluid behaviour Identification of main production mechanisms Design and analysis of well tests Production forecasting Application of Decline Curve Analysis in mature fields Detailed modeling of wells and reservoirs Water flooding Application of EOR methods Reserves and resource estimation Reservoir simulation approaches, model construction and well, aquifer and fluid modelling Development planning Uncertainty handling and scenario methods Depending on the background and requirements of the participants, some topics may be given more emphasis.   Training Objectives In this VILT course, reservoir engineering methods will be addressed which are of use in the daily reservoir engineering practice. The focus will be on practical applicability. Use is made of practical and actual reservoir engineering problems and examples to illustrate relevant subjects. By attending this VILT course, participants will have a deeper knowledge of modern reservoir engineering practices for reservoir development and production, including the construction and use of reservoir models. Target Audience The VILT course is intended for experienced reservoir engineers with prior technical or engineering exposure to production activities. Petroleum engineers and geoscientists who require more than general knowledge of reservoir engineering will also find this course useful. Participants are invited but not obliged to bring a short presentation (max of 15 minutes) on a practical problem they encountered in their work. This will then be explained and discussed in the VILT class. A short test or quiz will be held at the end the VILT course. Training Methods This VILT course will be delivered online over 5 half-days. There will be 2 blocks of two hours per day, including lectures, discussion, quizzes and short classroom exercises. Additionally, some self-study will be required. Two breaks of 10 minutes will be provided each day. Course Duration: 5 half-day sessions, 4 hours per session (20 hours in total). Trainer Your course leader is an independent Reservoir Engineering Consultant. He provides project consultancy, quality assurance and reservoir engineering training for major oil companies, governments, engineering firms and other global customers. Before he retired from Shell in 2012, he held positions as Senior Reserves Consultant for the Middle East and Reservoir Engineering Discipline Lead. He is a petroleum engineering professional, with global experience, mostly in Shell companies and joint ventures (NAM, SSB, SCL, PDO, SKDBV). He has been involved in reserves and resource management, has extensive reservoir modelling and reservoir simulation expertise, and wide experience in the design and delivery of training programmes for employee development. PROFESSIONAL EXPERIENCE 2012 - 2016 Independent Reservoir Engineering Consultant Project consultancy, quality assurance and reservoir engineering training for major oil companies, governments, engineering firms and other global customers. Delivering specialised and general Reservoir Engineering courses to a multitude of international companies. 2008 - 2012 Shell International E&P, the Hague, the Netherlands Senior Reserves Consultant for the Middle East Region Assurance of SEC and SPE compliance of reserves and resources in Shell Middle East region. Contributor to the 2012 SPE guidelines on reserves and resources assessment. 2006 - 2008 Shell E&P Technology Solutions, Rijswijk, the Netherlands Reservoir Engineering Discipline Lead Responsible for QA/QC of Reservoir Engineering in global E&P projects as well as for staff development. (over 60 international Reservoir Engineers) 2001 - 2005 Centre for Carbonate Studies, SQU, Oman / Shell International E&P Technology Applications and Research /Shell Representative Office Oman Petroleum Engineering Manager PE manager in the Carbonate Research centre, at Sultan Qaboos University in Oman. Industrial research projects and support to teaching on recovery aspects of carbonate reservoir development. Design and delivery of industrial courses on carbonate reservoirs 1997- 2000 Shell International E&P, Rijswijk, the Netherlands Principal Reservoir engineer. Acting Shell Group Reserves Co-ordinator in 1997-1998. Facilitation of workshops with government shareholders, including discussions on sensitive reserves issues (BSP Petroleum Unit Brunei, PDO Oman, SPDC government Nigeria). Co-ordination of the NOV subsurface team in Shell Kazakhstan Development BV in 2000. Leading role in Shell Gamechanger project on natural gas hydrates. 1992- 1996 Shell Training Centre, Noordwijkerhout, the Netherlands Reservoir Engineering Programme Training Director Directed Shell Group Reservoir Engineering Training. Introduced advanced PE training events, QA/QC and learning transfer measures, Design and delivery of reservoir engineering and multidiscipline courses to Shell staff from a wide range of nationalities. 1985- 1992 Shell International, SIPM, the Hague, The Netherlands Senior Reservoir Engineer Full field reservoir simulation projects supporting Field Development Plans, operational strategies and unitisation negotiations for Shell Group Operating Companies in the United Kingdom, New Zealand and Egypt. Major contributor to the Shell internal Gas Field Planning Tool development. 1984- 1985 Geological Survey of the Netherlands (RGD), Ministry of Economic Affairs Reservoir Engineering Section Head Responsible for Petroleum Engineering advice on oil and gas licences to the Ministry of Economic Affairs. First-hand experience with a government view on resource management. POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information about post training coaching support and fees applicable for this. Accreditions And Affliations

A virtual sales training programme aimed at enhancing the skills of the salesperson to have engaging customer conversations which open opportunities and close more business.

Course Description This training is designed for delegates who undertake a Healthcare Assistant role, or act as a support worker. You may also be training as a Lymphoedema Assistant.Please note price includes VAT Our fully inclusive HealthCare Assistant, Support Worker & Lymphoedema Assistant Training Programme Course Summary We know the role of the Health Care Assistant/Support Worker is integral to providing continued clinical care to people living with lymphoedema.   As a key team member, the individual is trained at a high level to ensure best practice.   This training is designed for delegates who undertake a Healthcare Assistant role, or act as a Support Worker, you may also be training as a Lymphoedema Assistant. Entry Requirements This training is suitable for: All Healthcare Assistants, Support Workers & Lymphoedema Assistants. Learning Format Your course is made up of a blended learning format meaning your content and modules will be taught through self-guided independent study and face to face clinical skills workshops.   So, whether you're learning style is social, solitary, visual, kinesthetic, auditory or a combination we have a learning style to help you get the best out of the course. We hope that you make the most out of the tools that are available to you throughout the course but don't worry if you are not the most "tech-savvy", we have real people on hand to help you every step of the way. Assessment Criteria All students will undergo a series of course specific formative & summative assessments. Throughout the course you will be assessed through observation of practical tasks, written assessments, assignments, research and online tests. Course Contents On completion you will have a thorough understanding of Anatomy, Physiology and pathophysiology, allowing you to assess and treat lymphoedema with essential management skills of compression, movement and drainage, skincare, risk reduction and understanding and assisting with technical skills. An ongoing theme throughout the training will be our focus on treatment, health, wellness, and lifestyle skills. Training will include a deeper look at the lymphatic system and drainage pathways. Through our research using Lymphofluoroscopy Imaging (ICG), we will introduce you to Fluoroscopy Guided Manual Lymphatic Drainage (FG-MLD®) and the ‘Fill & Flush’ technique. On completion of this training, you will have the theory and skills to treat the patient with more complex and challenging lymphatic conditions, including the management of midline oedema ensuring we provide you with skills to get faster, long lasting results from your treatment. Course Inclusions As part of your training pack, LTA will provide all training support materials required to undertake the course.   Such as but not limited to: LymphBalls™ Latest LTA Research & Development articles Lymphoedema supporting literature Access to in-house LTA training & demonstration videos Learning management platform (CANVAS) profile & course content Snacks & Refreshments throughout your practical skills workshops Dedicated support from the LTA training team Course Certification Our Lymphoedema Assistant Rehabilitation Programme will certify you as a ‘LTA Therapist’ on completion of both parts.   The benefit of an LTA certification means you can; Write LTA Cert. after your name Display FG-MLD® Certified and LTA Cert. logo on your marketing material Be recognised through wearing you LTA cert. qualification badge Practice MLD to further enhance outcomes Be listed on our international directory of lymphoedema services Use an innovative technique and ensure effective treatment programmes Receive training and support from Jane Wigg & Team Access the latest developments in Lymphoedema care Have access to a private FG-MLD® Therapist FB Page for on-going support and advice. Recertification To maintain your LTA Therapist Certification, a 2-day recertification is required after 12 months after your initial training, and you will be required to attend a 1-day recertification every 2 years thereafter to maintain your certification of practice.

https://www.internationalcollegeofprofessionalcelebrants.org/residential-celebrant-training Celebrant training

Discover the secrets of successful carbon capture and storage (CCS) project risk management through EnergyEdge's virtual instructor-led training (VILT). Join us and become an expert today!

Offer your customers a new, in-demand service with leather repair Leather repair is one of the most highly sought-after additional services detailing customers request. With over 53% of new cars delivered with leather or faux leather interiors, each one will likely require a repair at some point in its life, and with an average charge for a minor scuff of £120 and taking as little as 25 minutes to complete, through to full interior re-colouring costing upwards of £1000, it's become a must-have skill in a detailers arsenal for customer convenience, instant up-sell of services, and a standalone service instead of far more expensive re-trimming options. The course is a three-day, one-to-one training and skills session, which will take you through all steps of leather repair, from cleaning and assessment, through to fixing common scuffs, rips and tears. In-house colour matching and blending are taught, along with repair and recolour of steering wheels, and plastic recolouring. This course will give you the skills and confidence to complete leather repairs on all types of vehicles, with ongoing technical support for as long as you need it. Once complete your business can then become part of the Colourlock Accredited leather repair network. This includes; Colourlock branding and accredited-level discount on tools, consumables and materials. Optionally available is the Colourlock LRT master kit, to give you the tools and materials to complete repairs, the colour system to custom blend paints and various practice kits. When purchased with booking this has a saving of over £450 off RRP. Colourlock is one of the world's largest leather care and repair manufacturers, supplying OEM end leather solutions from the factory to the end user, along with repair solutions for professionals. Renowned the world over for their quality and the expertise of their training programme their knowledge and support are unrivalled and Colourlock currently has a presence on every continent. UK Detailing Academy is proud to be the exclusive training provider for Colourlock's Accredited Leather Technician course in the UK for both leather repair and the Top Life 2-year leather protection coating. The course is a three-day, one-to-one training and skills session, which will take you through all steps of leather repair, from cleaning and assessment, through to fixing common scuffs, rips and tears. In-house colour matching and blending are taught, along with repair and recolour of steering wheels, and plastic recolouring. This course will give you the skills and confidence to complete leather repairs on all types of vehicles, with ongoing technical support for as long as you need it. Once complete your business can then become part of the Colourlock Accredited leather repair network. This includes; Colourlock branding and accredited-level discount on tools, consumables and materials. Split over three days, with the first looking at leather in theory and cleaning and maintenance, the second on repairs and graining, and the third day spent with us practising colour matching, looking at more unusual repairs, and being able to spend the extra time on the practical repair side - until you can complete it with little to no input from the instructor. This level of instruction will lend you the confidence to immediately start minor repairs - though we recommend a period of practice to enhance your confidence with aspects such as colour matching and repair work. Optionally available is the Colourlock LRT master kit, to give you the tools and materials to complete repairs straight away and the colour system to custom blend paints for immediate resources. When purchased with booking, this benefits you a saving of over £450 off RRP.   LRT Master Kit The Colourlock Leather Technician Master kit is available to attendees on the Colourlock Accredited LRT 1-2-1 and group courses. Containing the tools equipment and consumables used and introduced on the course, it to allows you to hit the ground running and integrate leather repair into your business model. Included in the kit are a set of tools, cleaning and care products, a full 250ml set of pigment colours and top coats, graining and patching consumables, mixing tools, filters and various other niche items you won't know you need until you need them! RRP of over £2000 - on offer for pre-ordered kits for £1624 when ordered at the same time as the course only. Course Length 3 Days (0930 - 1600) Group Size One-to-One Location UK Detailing Academy, 2 Purlieus Barn, Ewen, Cirencester, GL7 6BY Experience / Qualification Open to all Refreshments or Lunch Refreshments included

Course Overview Lean Six Sigma is a proven combination of tools and techniques that has been used by leading organizations to improve efficiency, productivity and customer satisfaction. It achieves this by providing a rigorous and structured methodology and team approach to problem solving which leads to quality and performance improvements. Our Lean Six Sigma Green Belt training is a seven-day programme which includes an in-house project designed to provide participants with an understanding of the Six Sigma Green Belt Process and it’s practical application.  Trainees will enhance their current skills by developing a thorough understanding of the DMAIC (Define/Measure/Analyse/Improve/Control) methodology and its applications, creating a culture of problem solving and continuous improvement in their organization. In this way, key personnel become valuable contributors in achieving the larger goals and objectives of their organization. This powerful tool will enable you and your team to identify opportunities for improvement, and assist in the implementation of projects leading to efficiency by equipping key personnel with the expertise and the tools needed to manage and participate in cost reduction projects with innovative solutions.  Trainees will learn how to use data to pinpoint processes that need to be analysed and improved using the Six Sigma Tool sets, with a view to problem solving, increasing operational efficiency, improving productivity and customer satisfaction and the company’s overall business results. Our Lean Six Sigma Green Belt programme incorporates a project to be undertaken in your own organization during and after the training modules. This allows you to apply the tools, in your own working environment, to processes that are known to you, making the training relevant, and also leaving a improvement with measurable results in your organization. MINITAB (trial version can be downloaded free) and Excel software are used by participants during the training sessions and to complete their projects. Structure of the Course This 7-day training programme is divided into three modules as follows:  Define / Measure Phase - 3 days from Nov 25th to 27th, 2024 Analyse Phase - 2 days on January 13th &14th, 2025 Improve / Control Phase - 2 days on February 17th & 18th, 2025 A gap of 4 weeks between each module provides an opportunity for trainees to work on a project within their workplace, applying the methodology and tools learned during the previous module. Extra support can be provided between modules for each trainees with their project work. We provide a Lean Six Sigma Green Belt Manual for all delegates, and a Certification is awarded upon completion of the Green Belt training and ONE project by each trainee in which the targeted outcomes have been achieved. An outcome report and/or project presentation which demonstrates the use of the tools and methodology is required. Cost: £1,800 + VAT per person. What is included Seven days of face-to-face training delivered in 3 modules as listed above Project review and support for all participants during modules 2 & 3. Remote support available for the duration of the programme for trainees to consult with the trainer. All training material, and a Lean Six Sigma Green Belt Manual for all delegates Refreshments and lunch provided each day of training Free car park for all delegates Lean Six Sigma Green Belt certificate In-house Option This workshop can also be delivered in-house as a stand-alone training workshop or integrated into wider improvement activities. Contact us for more details at compete@cforc.org and we will be happy to discuss in the context of your own business needs. If you are not yet a member but are already thinking about joining CforC, you can find more information on how to become a member and the benefits by clicking here.