352 Dele courses in Sheffield

Introduction: “Co-ordinating the temporary works process” This two day course is designed to assist those on site who have responsibility for managing all forms of temporary works. It is also designed to give confidence to senior management and those who engage contractors have reached an assessed standard of knowledge. The course has the support of a number of organisations: Temporary Works Forum CECA, UKCG, HSE and FMB. The support of these organisations offers transferability of the course within industry.Temporary works are usually safety and business-critical and require careful co-ordination. An accepted way of achieving this is through the adoption of the management process outlined in BS5975, which introduces the temporary works co-ordinator (TWC) as a key figure. This course explains the role and the overall management context within which it sits.High risk can occur on small as well as larger sites hence understanding the essentials of good safety risk management, as outlined in BS5975, is relevant for projects of all sizes. This course will give the delegate thorough knowledge of the Temporary Works Co-ordinator role however this does not alone make a delegate competent, as this requires other attributes e.g. experience. Aims and Objectives: This course is not a temporary works awareness course. It is only concerned with the process of co-ordination of temporary works, commonly expressed through the role of the Temporary Works Co-ordinator. Attendance does not confer competency as a Temporary Works Co-ordinator.The course gives emphasis, throughout, to: – The importance of communication, co-ordination, co-operation and competency. The ‘4Cs’. – Risk management: safety and also business relatedAllowing the Temporary Works Co-ordinator (TWC) to: – Understand the need for and duties of a TWC – Understand the role of others – Have a detailed knowledge and understanding of BS5975 in respect of this role. Assessment: The method of assessment will be by multiple-choice questions at the end of the course as well as being expected to be interactive during the course.Course Attendance:Delegates are required to attend both sessions, since without full attendance and achievement in the examination the Temporary Works Co-ordinator Training Course cannot be made.Delegates must attend the days in order and, where not on consecutive days, must complete the course within two weeks. Delegates unable to attend both days due to extenuating circumstances (e.g. certificated sickness) will need to enrol onto a new course in order to maintain continuity of learning outcomes and attend both days again. It is expected that experienced and competent Temporary Works Co-ordinators will attend this course. Competence comes from a mixture of education, training and experience and should be judged by an appropriate senior individual, usually referred to as the Designated Individual (DI). Training is considered an essential element of Temporary Works Co-ordinator competence. Background Publications: This course, including its group work and exercises, is constructed around BS5975:2008 +A1:2011. For Open Courses Delegates should bring a copy with them in order not to be significantly disadvantaged. For in house courses it is expected that the Tutor will tailor the course around the organisation procedures,providing they are comprehensive and follow the philosophy of BS5975. In these cases delegates will need a copy of their own procedures. In the absence of adequate procedures delegates will need a copy of the BS itself.Although the following is not mandatory, delegates may find the following useful– BS EN12811-1:20031 Temporary works equipment. Scaffolds. Performance requirements and general design– BS EN12812:2008. Falsework ‐ performance requirements and general design– BS EN12813:2004. Temporary works equipment. Load bearing towers of prefabricated components. Particular methods of structural design– NASC TG20/13 plus supplement 1– NASC TG9:12

SSSTS The CITB SSSTS course is an accredited Site Supervisors Safety Training Scheme for the construction site supervisor, these are generally referred to as SSSTS training courses. The supervisors safety training scheme is now a requirement set out by the major contractors group for all supervisors who will be working on their sites. Construction skills and health and safety need to go hand in hand and made a priority to encourage improved work skills and reduced accidents and injuries. On the 2 day SSSTS training course the main focus will be on: THE IMPORTANCE OF RISK ASSESSMENTS IN THE CONSTRUCTION INDUSTRY THERE IS A FOCUS ON HOW TO IMPLEMENT CONTROL MEASURES ON SITE AND HOW TO USE COMMUNICATION TO ENSURE THE SITE REMAINS SAFE FOR EVERYONE MONITORING THE CONTROL MEASURES AND WORK ACTIVITIES ENSURING THAT THE WORK IS CARRIED OUT CORRECTLY AND SAFELY Delegates attending CITB SSSTS courses and who successfully complete will receive a SSSTS certificate to show that they are able to help supervise in the construction industry and have understanding when it comes to health and safety in the work place. During the course the main topics of the syllabus are: THE HEALTH AND SAFETY ACTS, REGULATIONS APPROVED CODES OF PRACTICE AND GUIDANCE NOTES THE HEALTH AND SAFETY LEGAL SYSTEM CAUSES, TYPES AND THE NUMBERS OF CONSTRUCTION ACCIDENTS RISK ASSESSMENTS IN ALL MANNER OF CONSTRUCTION CIRCUMSTANCES The concise SSSTS courses will provide you with the skills to: IDENTIFY PROBLEM AREAS FOUND IN THE CONSTRUCTION INDUSTRY UNDERSTAND AND APPRECIATE PROACTIVE AND REACTIVE MONITORING PERFORM RISK ASSESSMENTS AND RECOGNISE THE IMPORTANCE OF METHOD STATEMENTS HAVE AN UNDERSTANDING OF THE WAY THE HEALTH AND SAFETY LAWS ARE STRUCTURED LEARN SKILLS NEEDED TO PERFORM ON SITE INDUCTIONS, METHOD BRIEFS AND TOOLBOX TALKS CITB SSSTS Courses at a Glance The SSSTS training course is designed for first line mangers looking to continue or take on a supervisory role within the construction industry. The course takes place over two days and will teach health and safety skills needed to maintain a safe site. A thirty minute multiple choice examination will follow the training. Upon successful completion of the SSSTS training the candidate will be awarded with the CITB Site Supervisory Safety Training Certificate. Further Development Successful candidates can go on to complete the 5 day site managers safety training scheme SMSTS course designed for site managers and supervisors.

AVAILABLE ONLY TO APPLICANTS WHO HAVE ENROLLED ON (OR HAVE PREVIOUSLY COMPLETED) OUR INTRODUCTION TO PHLEBOTOMY COURSE Geopace Certificate of Competency Add live blood draws to your training Follow and complete a Competency Checklist Obtain tutor sign-off for live draws Awards a CPD Accredited Certificate Awards a Geopace Certificate of Competency Half day or evening sessions

SMTP training course description A hands on course focusing on the workings of email systems and the standard protocols that they use. The course is not specific to any particular implementation, but some vendor specifics are noted. Linux and Microsoft machines are used in hands on sessions to reinforce the theory of major sessions. The course concentrates on troubleshooting and interworking using network sniffing and protocol inspection rather than "which buttons to push". What will you learn Describe and explain SMTP MIME POP3 IMAP PGP, GPG, S/MIME SPF, DKIM, DMARC Configure mail routing Secure email systems SMTP training course details Who will benefit: Technical staff responsible for email systems. Prerequisites: TCP/IP foundation for engineers. Duration 3 days SMTP training course contents SMTP architecture What is SMTP, email before SMTP, SMTP history, the different protocols, clients, servers. Email composition, transmission, delivering emails, storing and reading emails. MUAs, MTAs, POP3, IMAP, SMTP, DNS, webmail. Hands on Setting up MTAs and MUAs and sending a simple email using telnet. The SMTP protocol SMTP protocol stack, SMTP headers, HELO, SMTP mail, MAIL FROM, RCPT TO, DATA, SMTPUTF8, 8BITMIME, TURN, EHLO, ETRN, 3 digit replies. Hands on Analysing SMTP packets on a network. DNS and SMTP SMTP forwarding, SMTP relays, interoperation, how SMTP uses DNS, MX records. Hands on Setting up mail relays. SMTP headers IMF data, From, to, cc, bcc, sender and recipient headers, message Ids, received trails, in-reply-to, received-SPF, mail list headers. Hands on Using clients to analyse details from mail headers, including true originators and path of emails. MIME Email attachments, MIME versions, content type headers, encoding, base 64, binary data, multi part headers, troubleshooting attachments. Hands on Analysing MIME headers and attachments. POP3 What is POP3, where to use POP3, authorisation, transactions, POP3 commands: USER, PASS, STAT, LIST, RETR, DELE. Hands on Setting up a POP3 server, analysing POP3 packets on a network. IMAP and IMAPS What is IMAP, where to use IMAP, authorisation, mailbox structure, IMAP commands: LOGIN, AUTHENTICATE, LIST, CREATE, Examine (message flags), SELECT, STORE. Hands on Setting up an IMAP server and analysing IMAP packets on a network. Interoperation Mail gateways, addressing, Exchange, sendmail. Email security Basics, Transport level: STARTTLS. Content: PGP/GPG, mail signing and encryption, S/MIME, digital certificates, secure email submission. Hands on Setting up and using a PGP key, configure MTAs to use TLS. Email authentication and spam prevention Mail relays, grey listing, block list & RBL, DNSBL (Real-time Black hole List), White list, SPF, Domain Keys Identified Mail (DKIM), Author Domain Signing Practices (ADSP), Abuse Report Format (ARF), Domain-based Message Authentication, Reporting and Conformance (DMARC). Hands on Relay spamming and the blocking spamming.

A Health & Safety Executive Approved course that complies with First Aid Regulations 1981. This is a refresher course for those that have previously attended and passed the First Aid At Work Course and now need to renew their certification. Who Should Attend? People that hold a valid First Aid At Work Certificate Course Content Health & Safety Using a First Aid Kit Incident Management Resuscitation / CPR - Adult, Child, Baby AED Familiarisation Recovery Position Choking - Adult, Child, Baby Burns & Scalds Poisoning including Anaphylaxis Epilepsy Shock Bleeding & Nose Bleeds Asthma Head Injuries Fractures, Sprains & Strains Many Other Specific Conditions Course Duration: Two Days Assessment / Certification Independent qualified assessors carry out the assessments. Each delegate that passes will receive a Certificate valid for Three years. Please note that training can take place upto 3 months in advance of the Certificate expiry date. The new Certificate will be dated from the expiry date of the old Certificate.

The CITB SSSTS course is an accredited Site Supervisors Safety Training Scheme for the construction site supervisor, these are generally referred to as SSSTS training courses. The supervisors safety training scheme is now a requirement set out by the major contractors group for all supervisors who will be working on their sites. Construction skills and health and safety need to go hand in hand and made a priority to encourage improved work skills and reduced accidents and injuries. On the 2 day SSSTS training course the main focus will be on: THE IMPORTANCE OF RISK ASSESSMENTS IN THE CONSTRUCTION INDUSTRY THERE IS A FOCUS ON HOW TO IMPLEMENT CONTROL MEASURES ON SITE AND HOW TO USE COMMUNICATION TO ENSURE THE SITE REMAINS SAFE FOR EVERYONE MONITORING THE CONTROL MEASURES AND WORK ACTIVITIES ENSURING THAT THE WORK IS CARRIED OUT CORRECTLY AND SAFELY Delegates attending CITB SSSTS courses and who successfully complete will receive a SSSTS certificate to show that they are able to help supervise in the construction industry and have understanding when it comes to health and safety in the work place. During the course the main topics of the syllabus are: THE HEALTH AND SAFETY ACTS, REGULATIONS APPROVED CODES OF PRACTICE AND GUIDANCE NOTES THE HEALTH AND SAFETY LEGAL SYSTEM CAUSES, TYPES AND THE NUMBERS OF CONSTRUCTION ACCIDENTS RISK ASSESSMENTS IN ALL MANNER OF CONSTRUCTION CIRCUMSTANCES The concise SSSTS courses will provide you with the skills to: IDENTIFY PROBLEM AREAS FOUND IN THE CONSTRUCTION INDUSTRY UNDERSTAND AND APPRECIATE PROACTIVE AND REACTIVE MONITORING PERFORM RISK ASSESSMENTS AND RECOGNISE THE IMPORTANCE OF METHOD STATEMENTS HAVE AN UNDERSTANDING OF THE WAY THE HEALTH AND SAFETY LAWS ARE STRUCTURED LEARN SKILLS NEEDED TO PERFORM ON SITE INDUCTIONS, METHOD BRIEFS AND TOOLBOX TALKS CITB SSSTS Courses at a Glance The SSSTS training course is designed for first line mangers looking to continue or take on a supervisory role within the construction industry. The course takes place over two days and will teach health and safety skills needed to maintain a safe site. A thirty minute multiple choice examination will follow the training. Upon successful completion of the SSSTS training the candidate will be awarded with the CITB Site Supervisory Safety Training Certificate. Further Development Successful candidates can go on to complete the 5 day site managers safety training scheme SMSTS course designed for site managers and supervisors.

Recent changes to Forestry Commission policy recommend those who work in the Forestry industry attend training which includes additional topics relevant to the risks and nature or their work. The Forestry Commission recommend topics including: Crush Injuries Catastrophic bleeding including chainsaw including chainsaw injuries and gun shot wounds Hypothermia / Exposure Suspension injuries Lyme's Disease Lightning & High Voltage injuries Casualty evacuation planning These are in addition to the normal Emergency First Aid criteria. Who Should Attend? This course is ideal for those who work or intend to work in a forestry, agricultural or remote environment, such as tree surgeons and farmers. Emergency First Aid Course Content Health & Safety First Aid Kit Resuscitation/CPR AED Familiarisation Recovery Position Choking - Adult, Child, Baby Burns & Scalds Poisoning including Anaphylaxis Epilepsy Shock Bleeding including Catastrophic bleeding Asthma Head Injuries Breaks, Sprains & Strains Specific Conditions (Heart Attack) Assessment / Certification Independent qualified assessors carry out the assessments. Each delegate that passes will receive a Certificate valid for Three years. Please note those holding a valid Certificate, training can take place up to 3 months in advance of the expiry date & the new Certificate will be dated from the expiry date of the old Certificate.

A Health & Safety Executive Approved course that complies with First Aid Regulations 1981 and includes AED familiarisation. This Course is ideal for smaller work places for persons in a lower risk work environment. Who Should Attend? Any member of an organisation who would find themselves in charge, or who has been appointed to take charge of first aid during a first aid emergency in the absence of a qualified First Aider. Course Content • Health & Safety • AED Familiarisation • First Aid Kit • Resuscitation/CPR - Adult, Child, Baby • Recovery Position • Choking - Adult, Child, Baby • Burns & Scalds • Poisoning including Anaphylaxis • Epilepsy • Shock • Bleeding & Nose Bleeds • Asthma • Head Injuries • Breaks, Sprains & Strains • Specific Conditions (Heart Attack) Assessment / Certification Independent qualified assessors carry out the assessments. Each delegate that passes will receive a Certificate valid for Three years. Please note that training can take place upto 3 months in advance of the Certificate expiry date. The new Certificate will be dated from the expiry date of the old Certificate.

What past delegates said: "I started looking for a course in education and training when I was offered a chance to help deliver some health & safety training in my local area - I was incredibly lucky to have found Ottilia Pochat Training. Ottilia has a wealth of experience in teaching, and she managed to share those skills and techniques with us in a way that was both incredibly informative and fun! I can’t recommend Ottilia Pochat Training highly enough - why wouldn’t you want to learn how to teach from the best?" This course is fully tutor-led and teaches you how to become a good, quality trainer Virtual Classroom, this course is run over 8 weeks: 16 sessions of 2½ hour duration, from 10:00 -12:30 and 13:30 - 16:00 The virtually run course starting on Friday 7 July will be held over 8 consecutive Fridays Face to Face: Five-day course Run by a Dutch teacher who spent 4 years learning to teach and has international teaching experience in working with all age groups Course Contents Roles and responsibilities in education and training Ways to maintain a safe and supportive learning environment Relationships between teachers and other professionals Boundaries between the teaching role and other professionals Points of referral to meet the individual needs of learners Inclusive teaching, including:Ways to create an inclusive teaching and learning environmentCreating an inclusive teaching and learning planJustifying own selection of teaching and learning approaches, resources and assessment methods in relation to individual learner needsUsing teaching and learning approaches to meet learner needsEvaluating the delivery of inclusive teaching and learning including areas for improvementDelivering inclusive teaching and learning to meet individual needs Communicating with learners in a way that meets their needs Understanding assessment in education and training, including:Different methods of assessment and how they can be adapted to meet individual learner needsHow to involve learners and others in the assessment processThe role and use of constructive feedbackRecord keeping of assessments Benefits of this course: This Ofqual regulated course will allow you to work in adult education Or even, run online training sessions With this course, you'll also be able to run professional workshops Accredited, Ofqual regulated qualification Our QA Level 3 Award in Education and Training (RQF) Course is a nationally recognised, Ofqual regulated qualification accredited by Qualsafe Awards. This means that you can rest assured that your level 3 Award in Education and Training fulfils the legal requirements to kick-start your own career in Education and Training. The Ofqual Register number for this course is 603/2770/4

Introduction: “Co-ordinating the temporary works process” This two day course is designed to assist those on site who have responsibility for managing all forms of temporary works. It is also designed to give confidence to senior management and those who engage contractors have reached an assessed standard of knowledge. The course has the support of a number of organisations: Temporary Works Forum CECA, UKCG, HSE and FMB. The support of these organisations offers transferability of the course within industry.Temporary works are usually safety and business-critical and require careful co-ordination. An accepted way of achieving this is through the adoption of the management process outlined in BS5975, which introduces the temporary works co-ordinator (TWC) as a key figure. This course explains the role and the overall management context within which it sits.High risk can occur on small as well as larger sites hence understanding the essentials of good safety risk management, as outlined in BS5975, is relevant for projects of all sizes. This course will give the delegate thorough knowledge of the Temporary Works Co-ordinator role however this does not alone make a delegate competent, as this requires other attributes e.g. experience. Aims and Objectives: This course is not a temporary works awareness course. It is only concerned with the process of co-ordination of temporary works, commonly expressed through the role of the Temporary Works Co-ordinator. Attendance does not confer competency as a Temporary Works Co-ordinator.The course gives emphasis, throughout, to: – The importance of communication, co-ordination, co-operation and competency. The ‘4Cs’. – Risk management: safety and also business relatedAllowing the Temporary Works Co-ordinator (TWC) to: – Understand the need for and duties of a TWC – Understand the role of others – Have a detailed knowledge and understanding of BS5975 in respect of this role. Assessment: The method of assessment will be by multiple-choice questions at the end of the course as well as being expected to be interactive during the course.Course Attendance:Delegates are required to attend both sessions, since without full attendance and achievement in the examination the Temporary Works Co-ordinator Training Course cannot be made.Delegates must attend the days in order and, where not on consecutive days, must complete the course within two weeks. Delegates unable to attend both days due to extenuating circumstances (e.g. certificated sickness) will need to enrol onto a new course in order to maintain continuity of learning outcomes and attend both days again. It is expected that experienced and competent Temporary Works Co-ordinators will attend this course. Competence comes from a mixture of education, training and experience and should be judged by an appropriate senior individual, usually referred to as the Designated Individual (DI). Training is considered an essential element of Temporary Works Co-ordinator competence. Background Publications: This course, including its group work and exercises, is constructed around BS5975:2008 +A1:2011. For Open Courses Delegates should bring a copy with them in order not to be significantly disadvantaged. For in house courses it is expected that the Tutor will tailor the course around the organisation procedures,providing they are comprehensive and follow the philosophy of BS5975. In these cases delegates will need a copy of their own procedures. In the absence of adequate procedures delegates will need a copy of the BS itself.Although the following is not mandatory, delegates may find the following useful– BS EN12811-1:20031 Temporary works equipment. Scaffolds. Performance requirements and general design– BS EN12812:2008. Falsework ‐ performance requirements and general design– BS EN12813:2004. Temporary works equipment. Load bearing towers of prefabricated components. Particular methods of structural design– NASC TG20/13 plus supplement 1– NASC TG9:12