422 Construction courses in Whetstone

The NVQ Level 3 Diploma in Insulation and Building Treatments provides a nationally recognised qualification for those working in the construction and the built environment sector and specialise in one or more of the following categories: External Wall Insulation Room in the Roof Park Homes Hybrid Wall Insulations Insulating Framed Sections The qualification modules will be discussed and agreed upon with each individual candidate to ensure that the qualification will be suited to your job role and will be achievable in order to demonstrate their competence and become eligible for the Gold CSCS Card. Each candidate will be allocated a designated and qualified assessor to provide support throughout the qualification and provide information, advice and guidance to candidates in order that they can achieve the qualification. If you require further information or are looking to undertake this qualification, please contact us. CSCS Cards Candidates can undertake the CSCS test and obtain the red (Provisional) CSCS card on signing up for various qualifications. The red card can usually be obtained within 7 to 14 days and can be used to access the construction sites for a period of 12 months. On completion of the qualification, you will receive a full advanced craft, 5 year, CSCS card.

CPCS A44 Concrete Pump Trailer Mounted

The NVQ Level 3 NVQ Diploma in Occupational Work Supervision is appropriate for individuals who supervise others in a construction area and are looking to become eligible for the Gold CSCS Card. The qualification modules will be discussed and agreed upon with each individual candidate to ensure that the qualification will be suited to your job role. Each candidate will be allocated a designated and qualified assessor to provide support throughout the qualification and provide information, advice and guidance to candidates in order that they can achieve the qualification. If you require further information or are looking to undertake this qualification, please contact us. CSCS Cards Candidates can undertake the CSCS test and obtain the red (Provisional) CSCS card on signing up for various qualifications. The red card can usually be obtained within 7 to 14 days and can be used to access the construction sites for a period of 12 months. On completion of the qualification candidates can upgrade or renew their CSCS Card to the full 5 year card.

The classification society, which is a non-governmental organisation in the shipping industry establishes and maintains technical standards for construction and operation of marine vessels and offshore structures. The primary role of the society is to classify ships and validate that their design and calculations are in accordance with the published standards. It also carries out periodical survey of ships to ensure that they continue to meet the parameters of set standards. The society is also responsible for classification of all offshore structures including platforms and submarines. Flag states maintain a ship register in which all ships that sail under their flag need to be registered. Classification societies are licensed by flag states to survey and classify ships and issue certificates on their behalf. They classify and certify marine vessels and structures on the basis of their structure, design and safety standards. The primary task of classification society surveyors is to survey in order to maintain the standards of construction and condition of ships and machinery, which have been laid down by the society. The secondary function of class surveyors, where their society is approved by governments, is for their surveys to be used as a basis for the issue of statutory certificates relating to safety at sea. A classification society’s workforce comprises of Surveyors who are full time employees and are generally referred to as “Exclusive” surveyors; the ones employed on a part time basis are “Non-exclusive” surveyors. Although the classification societies started in 1760 with captains who will examine a ship, more specialization came and now there are in principle there three kind of surveyors whom are mainly marine professionals’ mariners, such as a qualified ship's deck officers, mechanical/electrical engineers, naval architects. In most cases you will find the navigational inspectors as the flag state inspectors and auditors. The classification society uses the mechanical/electrical inspectors. They will start in the engine room and will learn the hull part in their inspection career. The hull surveyors are in a perfect world only naval architects. The auditors in the classification society can have navigational background but normally the surveyor with experience will become auditor. Although you will think that every class surveyor is entitled to inspect everything, this is however not the case. It is the intention of this course to extend the student’s knowledge and understanding of the role, workings and requirements of a classification society and its interface with IMO when applying statutory regulations on behalf of flag administrations and qualify you as an expert in this field able to deal with port state control, flag administration and vetting officials.

The NVQ Level 2 Diploma in Steelfixing Operations is appropriate for individuals aged 16 and over working in the construction sector who specialise in Steelfixing and are looking to become eligible for the Blue CSCS Card. Our team will discuss the qualification process with you prior to signing up in order to ensure that you will be able to complete the qualification. The aim of this qualification is to recognise the knowledge, skills and competence of individuals who specialise in Steelfixing in the construction industry. Upon completion of the qualification, you will be awarded the NVQ Level 2 Diploma in Steelfixing Operations. CSCS Cards We can provide CSCS tests and CSCS cards alongside your qualification without the need to attend the test centre. Speak to our friendly and helpful team for more information.

REFERENCE CODE 603/5285/1 COURSE LEVEL NVQ Level 2 THIS COURSE IS AVAILABLE IN Course Overview Who is this qualification for? This is a work-based learning qualification for those involved in laying floorcoverings in a Construction related working environment. Although many of the skills and knowledge across floorcovering occupations are generic, not all those employed to fit floorcoverings will be fitting the same product. The group of optional units will allow specialisms of timber based, textile and resilient floorcoverings. What is required from candidates? To achieve this pathway unit the survey work must be carried out in ways that will minimise the risk of damage to the work and surrounding area and using and maintaining equipment effectively. This qualification is made up of 9 mandatory units and a group of optional units. The minimum credit value of this qualification is 127 credits. Qualifications are now required to indicate the total qualification time (TQT), this is to show the typical time it will take someone to attain the required skills and knowledge to meet the qualification criteria, this qualification has a TQT of 1,270 hours. Qualifications are also required to indicate the number of hours of teaching someone would normally need to gain the skills and knowledge to achieve the qualification. These are referred to as Guided Learning Hours (GLH). The GLH for this qualification is 543 Mandatory units Level Credit Conforming to General Health, Safety and Welfare in the Workplace Conforming to Productive Working Practices in the Workplace Moving, Handling and Storing Resources in the Workplace Surface preparation to receive floorcoverings in the workplace Setting out for laying floorcoverings in the workplace Preparing and fitting underlays for floorcoverings in the workplace Develop customer relationships Assessing and preparing background surfaces for floor-covering in the workplace Assessing and evaluating conditions for floorcoverings in the workplace Optional Units (Minimum of 18 credits) Installing timber–based floorcoverings in the workplace Summary of the: GQA NVQ LEVEL 2 DIPLOMA IN FLOORCOVERING OCCUPATIONS (CONSTRUCTION) Installing textile floorcoverings in the workplace Installing resilient floorcoverings in the workplace Types of evidence: Evidence of knowledge is required. Evidence of knowledge through performance can contribute and if applicable should be demonstrated by completing projects and reports, by responding to questions or through Professional/Guided Discussions. Quantity of evidence: Evidence should show that you can meet the requirements of the units consistently over an appropriate period of time. Potential sources of evidence: Suggested sources of evidence are shown above, these can be supplemented by physical or documentary evidence, e.g.: Accident book/reporting system Notes and memos Safety record Telephone/e-mail records Training record Customer and colleague feedback Audio evidence Records of equipment and materials Witness testimonies Work records Photographic/ video evidence Please Note that photocopied or downloaded documents such as manufacturers or industry guidance, H&S policies, Risk Assessments etc, are not normally acceptable evidence for GQA qualifications unless accompanied by a record of a professional discussion or assessor statement confirming candidate knowledge of the subject. If you are in any doubt about the validity of evidence, please contact Oscar Onsite Academy

DESIGN AND MOCK UP BAGS AND ACCESSORIES – LEARN HOW TO PLAN, DESIGN AND COMMUNICATE YOUR PROJECT – Group Class: one teacher, six students – You will learn: What you need to study, research, and understand about the industry.How to correctly design a collection of fashion accessories.What information you should be able to provide about your designs.How to prepare a project for prototyping and manufacturing. How to create three-dimensional mock-ups of your designs. WHERE:At our South East London studioCOURSE LENGTH:Two consecutive weeks / Mon-Fri 10 am-3.30 pm   LEVEL:Complete beginners, beginners with some experience of drawing and/or designing and intermediate designers COURSE DESCRIPTION: BAG AND ACCESSORY DESIGN MASTERCLASSThis course is tailored for beginners and intermediate-level participants, offering a distinctive group class format designed to assist aspiring designers or those seeking guidance in bringing to life a practical and viable collection of bags and/or accessories.Through this course, you will gain a comprehensive grasp of fundamental skills in accessory design and what it requires to become a bag designer. It empowers you to transform your creative concepts into tangible realities by providing instruction on the essential steps required for prototyping and manufacturing your collection.In addition to acquiring the skills to design bags and accessories accurately and understanding what information to convey to a prototype maker, this course will guide you through the process of constructing three-dimensional mock-ups for your designs.   WHY THIS COURSE DIFFERS FROM THE TYPICAL ‘ACCESSORY DESIGN’ PROGRAMMEThis course has been meticulously designed by a team comprising designers, prototype makers, and handbag manufacturers. It offers a blend of theoretical and practical elements, providing you with the knowledge required by the industry to comprehend and accurately translate your ideas into finished products.Unlike courses that solely focus on creating aesthetically pleasing drawings, this programme emphasizes providing a comprehensive understanding of the intricate and extensive processes involved in designing a collection of handbags. It aims to equip you with the insights necessary to navigate the complexities, ensuring you are well-prepared before and during the design phase. By doing so, the course aims to save you time, expense, and potential frustration when it comes to prototyping and manufacturing your collection.   WHY WE DEVELOPED A FASHION DESIGN COURSEAfter years of designing and developing collections for our clients, we noticed a significant lack of clear information on what it truly takes to become a designer of handbags and fashion accessories.This course is crafted to assist both emerging and struggling designers in developing and articulating their ideas effectively for the prototyping phase. It addresses the needs and challenges faced by our customers, aiming to support and streamline the creative process for project realization.   WHO IS THIS COURSE FOR?This course is tailored for aspiring designers seeking professional advice from industry experts, individuals at the beginning of their design careers who require guidance to enhance their design process, or those simply looking to refine their drawing techniques for personal enjoyment.No previous experience is necessary.   WHAT WILL BE TAUGHT?Below is a list of topics covered during the classes:Understanding the role of a bag designerBefore designing: understanding and analsing crucial external aspects that will influence your business successAbout your business idea and profile: understanding the target audience, market placement, pricing strategy and more.Understanding what a moodboard is and how to use itUnderstanding the differences and purposes of illustrations vs technical drawingsUnderstanding the importance of construction and its impact on your designOverview of the anatomy of a handbag, lining and reinforcementsUnderstanding the structure of a collection: the use of a collection planLearning how to plan a balanced collection of fashion accessoriesUnderstanding finishing options for your designsUnderstanding hardware and its impact on the cost price of your collectionOverview of leather and vegan leatherIdentifying the right materials for your collectionLearning how to draw three-dimensional bagsSketching technical drawingsGoing through the product development of three designsDeveloping patterns and realising 1 to 3 three-dimensional mock-ups of your collectionProviding technical information about your collection to the prototype makerUnderstanding the prototyping processManufacturing your collection: how it works and what the options are HOW WILL THE CLASS BE TAUGHT?The class will take place in person at our London studio, and the lessons will alternate between theoretical instruction and practical exercises.Some homework will be assigned to students between lessons.   HOW LONG IS THIS TUITION?: This course spans two weeks and will be conducted from Monday to Friday, running from 10 am to 3.30 pm, with a 30-minute lunch break.   INCLUDED IN THE COURSE:You will also receive access to a collection of handouts providing relevant information, useful resources and support in continuing your designing process independently.The handouts will contain:– A glossary containing essential key words related to the topic of the lesson– An illustrated glossary containing information about type of bags and bags’ features– An illustrated guide on common hardware used in bags and accessories– Documents about leather types, finishings, tanning processes– Information about perspective and guides to be used as reference to develop your drawings– A list of recommended suppliers for both leather and fittings (physically in London and online)– A glossary containing information about leather types and characteristics   WHAT ARE THE ENTRY REQUIREMENTS?You should be able to use measurements and understand verbal and written English instructions.   ARE THERE ANY OTHER COSTS? IS THERE ANYTHING I NEED TO BRING?Materials to exercise with are included.Feel free to bring a notepad, if you would like to take some notes, we will provide the rest.

The Level 2 NVQ Diploma in Cladding Operations is appropriate for individuals aged 16 and over working in the construction sector who specialise in Cladding and are looking to become eligible for the Blue CSCS Card. Our team will discuss the qualification process with you prior to signing up in order to ensure that you will be able to complete the qualification. Complete the qualification within a few short weeks providing that you work with your assessor to provide the required evidence. Qualification times can be as little as 4 to 8 weeks! The aim of this qualification is to recognise the knowledge, skills and competence of individuals who specialise in Cladding in the construction industry. CSCS Cards We can provide CSCS tests and CSCS Cards alongside the qualifications without the need to attend the test centre. Speak with our friendly and helpful team for more information.

Level 2 NVQ Certificate in Plant Operations - Fork Lift Trucks

NOCN NVQ Level 3 Diploma in Supervising Hire and Rental Operations