78 Educators providing Compliance & Safety courses near Pity Me, Durham

Course Introduction Our Venepuncture and Phlebotomy training equips delegates with the skills and knowledge needed to take blood safely. Please note: this course is for health care professionals and nurses only. About this event Applicable to Nurses, Health Care Assistants and Phlebotomists in primary care, the community, hospitals or nursing homes, this course is interactive and involves a demonstration session on performing blood tests. Our venepuncture training will give delegates the theoretical and practical awareness to undertake a competence assessment framework in the workplace that will deem them competent to take blood safely and appropriately. Each delegate will receive a competence-based framework to allow them to do this. Course Aims Identify and describe equipment used for routine venepuncture Be able to assess and select suitable sites used for venepuncture as well as locations to avoid Describe and utilize the required steps to perform routine venepuncture Describe actions that ensure safety during performance of a venepuncture Identify suitable vein selection and identify factors influencing this Understand relevant professional and legal issues Be able to identify potential complications Understand anatomy and physiology and correct vein selection Be familiar with equipment and exercise choice in using most appropriate equipment Practice safely in terms of infection control and waste management Become skilled and competent at phlebotomy To recognise any complications arising and be able to take the appropriate action Course Content Background and importance of training and competence Supervision and practice Scope and responsibilities Accountability Professional and legal issues Consent and capacity What is phlebotomy? Tools of the trade-equipment Needles and patient safety Blood collection systems and devices Syringes and when to use them Blood collection tubes Labelling Anatomy and physiology Vein Selection: - Identification of Veins - Arm Veins - Hand Veins Vein assessment Unacceptable sites for venous collection Venepuncture procedure Attempts Order of Fill Specimen collection procedures Specimen handling post-phlebotomy Personal protective equipment Needle stick injuries Legislation-EU Directives Disposal Needle phobias Dealing with anxiety/fainting etc. Practical session Potential Complications (including infection control) Practical Application - techniques and troubleshooting Case scenarios Troubleshooting Audit Who should attend / would be applicable? Nurses HCAs Those interested in careers as Phlebotomists AB Health Group awards CPD points / certificate of attendance for each course. If you would prefer an accredited certificate by our accrediting body Aim Qualifications we can organise this. The charge for the certificate including postage is £30.00. Annie Barr AB Health Group Organiser Description Annie Barr is a leading provider of high quality, accredited healthcare training. With a selection of engaging healthcare training that has been developed by experts to equip you and your workforce with the skills, knowledge and competence needed to provide compassionate and high quality care.

Description Our Ear Care training course is designed to provide healthcare professionals with the knowledge and skills required to safely assess the need for and perform ear irrigation using specialised ear irrigation devices. PLEASE NOTE WE DO NOT COVER MICROSUCTION ON THIS COURSE. This training covers how to perform this procedure in a variety of settings, including general practice, community care, emergency, residential care and pharmacy. It is healthcare professionals already working in a healthcare setting with appropriate supervision and support - including both those with no prior knowledge of aural care or those who need an update in their skills and knowledge base. Delegates will leave our Ear Care course with a competency-based assessment document, which will enable them to undertake a period of supervised mentoring and practice. A practical demonstration of how to use the propulse machine is included in this training however please note that we do not practice on “live subjects”. Includes All course materials and certificate of attendance Accreditation 6 CPD points awarded on completion. Accredited by Aim Qualifications (*Certificate £30) and CPD Standards (*Certificate free) Please note: this course is for health care professionals and nurses only. Annie Barr AB Health Group Organiser Description Annie Barr is a leading provider of high-quality, accredited healthcare training. With a selection of engaging healthcare training that has been developed by experts to equip you and your workforce with the skills, knowledge and competence needed to provide compassionate and high-quality care.

Course Introduction Our wound care training course comprehensively covers the various types of wounds, how they occur and how to manage them About this event In this Wound Management course, you will learn about wounds and how they occur, how to manage them and the different types of wounds. We will cover leg ulcers and compression bandaging. You will leave with the knowledge and confidence to complete a competency-based framework document to be used in practice. You need to identify a mentor who will supervise your practice. In order to gain your certificate, you will need to complete the competence-based framework. Aims and Objectives Comprehensively develop knowledge and skills required for safe and effective wound management. Describe the anatomy and physiology of the skin Describe the purpose of the skin Describe the causes of wounds and risk factors Understand complications Understand infection control Be able to assess and classify wounds and apply knowledge when dealing with wounds Understand your role in relation to wounds and wound management including guidelines and boundaries Describe the issues relating to the therapeutics of the relevant dressings and how they work Understand how to apply dressings safely including choice of dressing for the appropriate site and the need for observation of patient post-procedure Understand the need for audit and governance Recognise factors that delay healing Understand how to remove sutures and staples correctly Course Contents Role of the HCA Accountability responsibility guidelines and requirements Legal issues Confidentiality Consent and Capacity Documentation and record-keeping Supervision and competence Anatomy and physiology of the skin and wound healing including: inflammation, proliferation, epithelialisation, maturation Factors that promote and delay wound healing Risk factors Classification of wounds Aseptic technique and infection control What dressing for what wounds? Dressings and how to apply Dressing -selection Wound management Necrotic wounds Granulating wounds Leg Ulcers Compression bandages Recognising signs of infection and deterioration Includes All course materials and certificate of attendance AB Health Group awards CPD points/certificate of attendance for each course. If you would prefer an accredited certificate by our accrediting body Aim Qualifications we can organise this. The charge for the certificate including postage is £30.00. Annie Barr AB Health Group Organiser Description Annie Barr is a leading provider of high-quality, accredited healthcare training. With a selection of engaging healthcare training that has been developed by experts to equip you and your workforce with the skills, knowledge and competence needed to provide compassionate and high-quality care.

Clinical skills, HCAs, Nurses, Chronic disease

NPORS Lift Supervisor Training The aim of the NPORS Lift Supervisor Training is to Provide candidates with underpinning knowledge to allow them to understand the role and responsibility of the Lift Supervisor. As a result of the Lift Supervisor Course, and following successful completion of the NPORS Crane Supervisor training candidates will be able to understand and follow safe systems of work for lifting operations. This Lift supervisor course is for 3 days and can be completed at your site or ours. It is important that all delegates have a good understanding of spoken and written English for NPORS Crane Supervisor Training. NPORS Lift Supervisor Experienced Test Book with Confidence at Vally Plant Training At Vally Plant Training, we guarantee unbeatable value with our Lift Supervisor Experienced Test Price Match Promise. When you choose us, you can book with confidence, knowing that we will not be beaten on price. If you find a lower price for the same NPORS Lift Supervisor Experienced Worker Test, we’ll match it—ensuring you receive top-quality training at the best possible rate. Click for our terms and conditions Your skills, our commitment—always at the best price. NPORS Lift Supervisor Experienced Worker Test is for operators who have received some form of Lift Supervisor Course in the past or alternatively has been working with Lifting equipment, like cranes, Excavators or Telehandlers for a number of years. If you are unsure if you qualify to go down the Lift Supervisor experienced test route please contact our team to discuss this in more detail. Discounts are available for multiple Lift Supervisor Course bookings There are two parts to the lift supervisor test, a theory section comprised of 25 questions and a practical session, however Lift Supervisor training revision notes will be sent once the test has been booked. It is important that all delegates have a good understanding of spoken and written English for NPORS Crane Supervisor Training Crane Supervisor Course Summary: Leading Safe and Efficient Lifting Operations Introduction Ever wonder who keeps construction sites and warehouses running smoothly and safely? That’s where lift supervisors come in. They’re the unsung heroes ensuring everything moves like clockwork. And when it comes to proving you’re the best in the biz, NPORS certification is your golden ticket. It’s not just a piece of paper; it’s your passport to climbing the career ladder. Choose our Lifting Supervisor Course Today. Why Choose Our NPORS Lift Supervisor Training? What makes our training stand out with our Lifting Supervisor Course? Imagine learning from folks who’ve been in the trenches, in training grounds that feel like the real deal, and schedules that bend to your life, not the other way around. We’re not about boring lectures; we’re about getting your hands dirty. Who Should Attend Lift Supervisor Training? Are you the go-to person when things need to get done? Whether you’re starting out or looking to step up, if you’re in the world of construction or logistics, this Lifting Supervisor Course is for you. It’s tailored for those who like to keep things moving, safely and efficiently. Course Objectives: 1. Understanding Regulatory Requirements: Familiarise participants with relevant regulations and industry standards governing crane operations, LOLER. Ensure compliance with legal requirements and best practices for safe lifting operations, BS7121. 2. Roles and Responsibilities of a Crane Lift Supervisor: Define the roles and responsibilities of a Lift supervisor within the context of lifting operations. Highlight the importance of effective communication, leadership, and decision-making skills. 3. Crane Safety Procedures: Provide an overview of crane safety procedures, including pre-operational checks, equipment inspection, and maintenance. Emphasize the importance of hazard identification, risk assessment, and mitigation strategies. 4. Lifting Plan Development: Guide participants in the understanding of the lifting plans tailored to specific lifting tasks and site conditions created by the Appointed Person(AP). Address factors such as load weight, size, shape, centre of gravity, and environmental considerations. 5. Site Safety and Hazard Awareness: Enhance participants’ awareness of potential hazards in the lifting environment, such as overhead power lines, unstable ground, and confined spaces. Implement effective measures to mitigate risks and ensure a safe working environment. 6. Communication and Coordination: Stress the importance of clear and effective communication between crane operators, riggers, signallers, and other personnel involved in lifting operations. Provide guidance on establishing communication protocols, using standardized hand signals, and conducting pre-lift briefings. 7. Emergency Response and Crisis Management: Equip participants with the skills and knowledge to respond effectively to emergencies and crisis situations during lifting operations. Implement emergency procedures, evacuation protocols, and contingency plans to mitigate risks and ensure personnel safety. 8. Practical Exercises and Case Studies: Provide hands-on lift supervisor training opportunities for participants to apply theoretical knowledge in practical scenarios. Analyse real-life case studies to identify lessons learned, best practices, and areas for improvement in crane supervision. Learning Outcomes By the end, you’ll be a pro at keeping sites safe, managing lifts, and leading teams. You’ll walk away not just with knowledge, but with practical skills that meet and beat industry standards. It’s about making you the go to lift supervisor everyone wants on their team. Course Logistics Ready to jump in? We’ve got training spots across the UK, with dates and times that fit your life. Signing up is a breeze, and we’ll guide you through any paperwork or prerequisites. It’s all about making it easy for you to get started. Conclusion: A crane supervisor course aims to empower participants with the expertise and confidence to lead safe and efficient lifting operations on construction sites. By focusing on regulatory compliance, safety procedures, lifting plan development, hazard awareness, communication, and practical training, the course prepares crane supervisors to fulfil their roles effectively and ensure the well-being of all personnel involved in lifting activities. Investing in crane supervisor training is essential for promoting a culture of safety, minimising risks, and achieving excellence in crane operations management. Crane Supervisor Training Available 7 days a week to suit your business requirements. VPT have a team of friendly and approachable instructors, who importantly have a wealth of knowledge of lifting supervision and the construction industry We have our own training centre conveniently located close to the M5 junction 9, In Tewkesbury. With its own purpose-built practical training area to simulate an actual working environment for the supervisor course. Our Lift Supervisor training and test packages are priced to be competitive. Discounts are available for multiple bookings We can send a fully qualified NPORS supervisor Tester to your site nationwide, for instance to reduce the amount of time away from work More courses: Polish your abilities with our dedicated Lift Supervision Training, Slinger Signaller Training, Telehandler Training, Cat & Genny Training, Plant Loader Securer, Ride-On Road Roller, Abrasive Wheel Training, Lorry Loader Training and Scissor Lift Training sessions. Learn the safe and effective operation of these vital machines, crucial for construction and maintenance tasks. Elevate your skills and career prospects by enrolling in our comprehensive courses today. Frequently Asked Questions 1. What is Lift Supervisor Training? Lift Supervisor Training is a specialised course designed to equip individuals with the knowledge and skills required to supervise lifting operations safely and efficiently. This training typically covers topics such as planning lifts, managing lifting equipment, and ensuring compliance with safety regulations. 2. Who should attend The Lifting Supervisor Course? This training is ideal for individuals responsible for overseeing lifting operations on construction sites, in warehouses, or any environment where lifting equipment like cranes are used. It’s particularly beneficial for site supervisors, managers, and anyone involved in the planning and execution of lifting operations to attend the NPORS Lift supervisor Course. 3. What certifications are available through the Lift Supervisor Training? Participants can obtain several Lift Supervisor certifications, including: NPORS Traditional card: Valid for 5 years, widely accepted in various sectors. NPORS card with CSCS logo: Recognised by major building contractors, with an initial RED trained operator card that can be upgraded to a BLUE competent operator card after completing relevant Crane Supervisor NVQ. 4. Is a health and safety test required for the NPORS Crane Supervisor Red operator card with the CSCS logo? Yes, to qualify for this card, you must have completed the CSCS operatives health and safety test within the last two years. 5 . How long is the certification valid, and what is the renewal process? The NPORS Traditional card is valid for 5 years. The NPORS card with the CSCS logo’s RED trained operator card is valid for 2 years, after which it can be upgraded to a BLUE competent Crane Supervisor operator card upon completion of relevant NVQs. The renewal process typically involves undergoing a refresher course or assessment to ensure continued competence. For those looking for a “NPORS Crane Supervisor Training near me,” our widespread operations make it convenient for you to access Vally Plant Trainings top-quality training no matter where you are in the UK

This course enables you to comply with Health and Safety Legislation by training your staff to...